| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) 2017 SiFive |
| * Copyright (C) 2018 Christoph Hellwig |
| */ |
| #define pr_fmt(fmt) "plic: " fmt |
| #include <linux/cpu.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/irq.h> |
| #include <linux/irqchip.h> |
| #include <linux/irqchip/chained_irq.h> |
| #include <linux/irqdomain.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| #include <linux/of_irq.h> |
| #include <linux/platform_device.h> |
| #include <linux/spinlock.h> |
| #include <asm/smp.h> |
| |
| /* |
| * This driver implements a version of the RISC-V PLIC with the actual layout |
| * specified in chapter 8 of the SiFive U5 Coreplex Series Manual: |
| * |
| * https://static.dev.sifive.com/U54-MC-RVCoreIP.pdf |
| * |
| * The largest number supported by devices marked as 'sifive,plic-1.0.0', is |
| * 1024, of which device 0 is defined as non-existent by the RISC-V Privileged |
| * Spec. |
| */ |
| |
| #define MAX_DEVICES 1024 |
| #define MAX_CONTEXTS 15872 |
| |
| /* |
| * Each interrupt source has a priority register associated with it. |
| * We always hardwire it to one in Linux. |
| */ |
| #define PRIORITY_BASE 0 |
| #define PRIORITY_PER_ID 4 |
| |
| /* |
| * Each hart context has a vector of interrupt enable bits associated with it. |
| * There's one bit for each interrupt source. |
| */ |
| #define CONTEXT_ENABLE_BASE 0x2000 |
| #define CONTEXT_ENABLE_SIZE 0x80 |
| |
| /* |
| * Each hart context has a set of control registers associated with it. Right |
| * now there's only two: a source priority threshold over which the hart will |
| * take an interrupt, and a register to claim interrupts. |
| */ |
| #define CONTEXT_BASE 0x200000 |
| #define CONTEXT_SIZE 0x1000 |
| #define CONTEXT_THRESHOLD 0x00 |
| #define CONTEXT_CLAIM 0x04 |
| |
| #define PLIC_DISABLE_THRESHOLD 0x7 |
| #define PLIC_ENABLE_THRESHOLD 0 |
| |
| #define PLIC_QUIRK_EDGE_INTERRUPT 0 |
| |
| struct plic_priv { |
| struct cpumask lmask; |
| struct irq_domain *irqdomain; |
| void __iomem *regs; |
| unsigned long plic_quirks; |
| }; |
| |
| struct plic_handler { |
| bool present; |
| void __iomem *hart_base; |
| /* |
| * Protect mask operations on the registers given that we can't |
| * assume atomic memory operations work on them. |
| */ |
| raw_spinlock_t enable_lock; |
| void __iomem *enable_base; |
| struct plic_priv *priv; |
| }; |
| static int plic_parent_irq __ro_after_init; |
| static bool plic_cpuhp_setup_done __ro_after_init; |
| static DEFINE_PER_CPU(struct plic_handler, plic_handlers); |
| |
| static int plic_irq_set_type(struct irq_data *d, unsigned int type); |
| |
| static void __plic_toggle(void __iomem *enable_base, int hwirq, int enable) |
| { |
| u32 __iomem *reg = enable_base + (hwirq / 32) * sizeof(u32); |
| u32 hwirq_mask = 1 << (hwirq % 32); |
| |
| if (enable) |
| writel(readl(reg) | hwirq_mask, reg); |
| else |
| writel(readl(reg) & ~hwirq_mask, reg); |
| } |
| |
| static void plic_toggle(struct plic_handler *handler, int hwirq, int enable) |
| { |
| raw_spin_lock(&handler->enable_lock); |
| __plic_toggle(handler->enable_base, hwirq, enable); |
| raw_spin_unlock(&handler->enable_lock); |
| } |
| |
| static inline void plic_irq_toggle(const struct cpumask *mask, |
| struct irq_data *d, int enable) |
| { |
| int cpu; |
| |
| for_each_cpu(cpu, mask) { |
| struct plic_handler *handler = per_cpu_ptr(&plic_handlers, cpu); |
| |
| plic_toggle(handler, d->hwirq, enable); |
| } |
| } |
| |
| static void plic_irq_enable(struct irq_data *d) |
| { |
| plic_irq_toggle(irq_data_get_effective_affinity_mask(d), d, 1); |
| } |
| |
| static void plic_irq_disable(struct irq_data *d) |
| { |
| plic_irq_toggle(irq_data_get_effective_affinity_mask(d), d, 0); |
| } |
| |
| static void plic_irq_unmask(struct irq_data *d) |
| { |
| struct plic_priv *priv = irq_data_get_irq_chip_data(d); |
| |
| writel(1, priv->regs + PRIORITY_BASE + d->hwirq * PRIORITY_PER_ID); |
| } |
| |
| static void plic_irq_mask(struct irq_data *d) |
| { |
| struct plic_priv *priv = irq_data_get_irq_chip_data(d); |
| |
| writel(0, priv->regs + PRIORITY_BASE + d->hwirq * PRIORITY_PER_ID); |
| } |
| |
| static void plic_irq_eoi(struct irq_data *d) |
| { |
| struct plic_handler *handler = this_cpu_ptr(&plic_handlers); |
| |
| writel(d->hwirq, handler->hart_base + CONTEXT_CLAIM); |
| } |
| |
| #ifdef CONFIG_SMP |
| static int plic_set_affinity(struct irq_data *d, |
| const struct cpumask *mask_val, bool force) |
| { |
| unsigned int cpu; |
| struct cpumask amask; |
| struct plic_priv *priv = irq_data_get_irq_chip_data(d); |
| |
| cpumask_and(&amask, &priv->lmask, mask_val); |
| |
| if (force) |
| cpu = cpumask_first(&amask); |
| else |
| cpu = cpumask_any_and(&amask, cpu_online_mask); |
| |
| if (cpu >= nr_cpu_ids) |
| return -EINVAL; |
| |
| plic_irq_disable(d); |
| |
| irq_data_update_effective_affinity(d, cpumask_of(cpu)); |
| |
| if (!irqd_irq_disabled(d)) |
| plic_irq_enable(d); |
| |
| return IRQ_SET_MASK_OK_DONE; |
| } |
| #endif |
| |
| static struct irq_chip plic_edge_chip = { |
| .name = "SiFive PLIC", |
| .irq_enable = plic_irq_enable, |
| .irq_disable = plic_irq_disable, |
| .irq_ack = plic_irq_eoi, |
| .irq_mask = plic_irq_mask, |
| .irq_unmask = plic_irq_unmask, |
| #ifdef CONFIG_SMP |
| .irq_set_affinity = plic_set_affinity, |
| #endif |
| .irq_set_type = plic_irq_set_type, |
| .flags = IRQCHIP_AFFINITY_PRE_STARTUP, |
| }; |
| |
| static struct irq_chip plic_chip = { |
| .name = "SiFive PLIC", |
| .irq_enable = plic_irq_enable, |
| .irq_disable = plic_irq_disable, |
| .irq_mask = plic_irq_mask, |
| .irq_unmask = plic_irq_unmask, |
| .irq_eoi = plic_irq_eoi, |
| #ifdef CONFIG_SMP |
| .irq_set_affinity = plic_set_affinity, |
| #endif |
| .irq_set_type = plic_irq_set_type, |
| .flags = IRQCHIP_AFFINITY_PRE_STARTUP, |
| }; |
| |
| static int plic_irq_set_type(struct irq_data *d, unsigned int type) |
| { |
| struct plic_priv *priv = irq_data_get_irq_chip_data(d); |
| |
| if (!test_bit(PLIC_QUIRK_EDGE_INTERRUPT, &priv->plic_quirks)) |
| return IRQ_SET_MASK_OK_NOCOPY; |
| |
| switch (type) { |
| case IRQ_TYPE_EDGE_RISING: |
| irq_set_chip_handler_name_locked(d, &plic_edge_chip, |
| handle_edge_irq, NULL); |
| break; |
| case IRQ_TYPE_LEVEL_HIGH: |
| irq_set_chip_handler_name_locked(d, &plic_chip, |
| handle_fasteoi_irq, NULL); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return IRQ_SET_MASK_OK; |
| } |
| |
| static int plic_irqdomain_map(struct irq_domain *d, unsigned int irq, |
| irq_hw_number_t hwirq) |
| { |
| struct plic_priv *priv = d->host_data; |
| |
| irq_domain_set_info(d, irq, hwirq, &plic_chip, d->host_data, |
| handle_fasteoi_irq, NULL, NULL); |
| irq_set_noprobe(irq); |
| irq_set_affinity(irq, &priv->lmask); |
| return 0; |
| } |
| |
| static int plic_irq_domain_translate(struct irq_domain *d, |
| struct irq_fwspec *fwspec, |
| unsigned long *hwirq, |
| unsigned int *type) |
| { |
| struct plic_priv *priv = d->host_data; |
| |
| if (test_bit(PLIC_QUIRK_EDGE_INTERRUPT, &priv->plic_quirks)) |
| return irq_domain_translate_twocell(d, fwspec, hwirq, type); |
| |
| return irq_domain_translate_onecell(d, fwspec, hwirq, type); |
| } |
| |
| static int plic_irq_domain_alloc(struct irq_domain *domain, unsigned int virq, |
| unsigned int nr_irqs, void *arg) |
| { |
| int i, ret; |
| irq_hw_number_t hwirq; |
| unsigned int type; |
| struct irq_fwspec *fwspec = arg; |
| |
| ret = plic_irq_domain_translate(domain, fwspec, &hwirq, &type); |
| if (ret) |
| return ret; |
| |
| for (i = 0; i < nr_irqs; i++) { |
| ret = plic_irqdomain_map(domain, virq + i, hwirq + i); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static const struct irq_domain_ops plic_irqdomain_ops = { |
| .translate = plic_irq_domain_translate, |
| .alloc = plic_irq_domain_alloc, |
| .free = irq_domain_free_irqs_top, |
| }; |
| |
| /* |
| * Handling an interrupt is a two-step process: first you claim the interrupt |
| * by reading the claim register, then you complete the interrupt by writing |
| * that source ID back to the same claim register. This automatically enables |
| * and disables the interrupt, so there's nothing else to do. |
| */ |
| static void plic_handle_irq(struct irq_desc *desc) |
| { |
| struct plic_handler *handler = this_cpu_ptr(&plic_handlers); |
| struct irq_chip *chip = irq_desc_get_chip(desc); |
| void __iomem *claim = handler->hart_base + CONTEXT_CLAIM; |
| irq_hw_number_t hwirq; |
| |
| WARN_ON_ONCE(!handler->present); |
| |
| chained_irq_enter(chip, desc); |
| |
| while ((hwirq = readl(claim))) { |
| int err = generic_handle_domain_irq(handler->priv->irqdomain, |
| hwirq); |
| if (unlikely(err)) |
| pr_warn_ratelimited("can't find mapping for hwirq %lu\n", |
| hwirq); |
| } |
| |
| chained_irq_exit(chip, desc); |
| } |
| |
| static void plic_set_threshold(struct plic_handler *handler, u32 threshold) |
| { |
| /* priority must be > threshold to trigger an interrupt */ |
| writel(threshold, handler->hart_base + CONTEXT_THRESHOLD); |
| } |
| |
| static int plic_dying_cpu(unsigned int cpu) |
| { |
| if (plic_parent_irq) |
| disable_percpu_irq(plic_parent_irq); |
| |
| return 0; |
| } |
| |
| static int plic_starting_cpu(unsigned int cpu) |
| { |
| struct plic_handler *handler = this_cpu_ptr(&plic_handlers); |
| |
| if (plic_parent_irq) |
| enable_percpu_irq(plic_parent_irq, |
| irq_get_trigger_type(plic_parent_irq)); |
| else |
| pr_warn("cpu%d: parent irq not available\n", cpu); |
| plic_set_threshold(handler, PLIC_ENABLE_THRESHOLD); |
| |
| return 0; |
| } |
| |
| static int __init __plic_init(struct device_node *node, |
| struct device_node *parent, |
| unsigned long plic_quirks) |
| { |
| int error = 0, nr_contexts, nr_handlers = 0, i; |
| u32 nr_irqs; |
| struct plic_priv *priv; |
| struct plic_handler *handler; |
| |
| priv = kzalloc(sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| priv->plic_quirks = plic_quirks; |
| |
| priv->regs = of_iomap(node, 0); |
| if (WARN_ON(!priv->regs)) { |
| error = -EIO; |
| goto out_free_priv; |
| } |
| |
| error = -EINVAL; |
| of_property_read_u32(node, "riscv,ndev", &nr_irqs); |
| if (WARN_ON(!nr_irqs)) |
| goto out_iounmap; |
| |
| nr_contexts = of_irq_count(node); |
| if (WARN_ON(!nr_contexts)) |
| goto out_iounmap; |
| |
| error = -ENOMEM; |
| priv->irqdomain = irq_domain_add_linear(node, nr_irqs + 1, |
| &plic_irqdomain_ops, priv); |
| if (WARN_ON(!priv->irqdomain)) |
| goto out_iounmap; |
| |
| for (i = 0; i < nr_contexts; i++) { |
| struct of_phandle_args parent; |
| irq_hw_number_t hwirq; |
| int cpu; |
| unsigned long hartid; |
| |
| if (of_irq_parse_one(node, i, &parent)) { |
| pr_err("failed to parse parent for context %d.\n", i); |
| continue; |
| } |
| |
| /* |
| * Skip contexts other than external interrupts for our |
| * privilege level. |
| */ |
| if (parent.args[0] != RV_IRQ_EXT) { |
| /* Disable S-mode enable bits if running in M-mode. */ |
| if (IS_ENABLED(CONFIG_RISCV_M_MODE)) { |
| void __iomem *enable_base = priv->regs + |
| CONTEXT_ENABLE_BASE + |
| i * CONTEXT_ENABLE_SIZE; |
| |
| for (hwirq = 1; hwirq <= nr_irqs; hwirq++) |
| __plic_toggle(enable_base, hwirq, 0); |
| } |
| continue; |
| } |
| |
| error = riscv_of_parent_hartid(parent.np, &hartid); |
| if (error < 0) { |
| pr_warn("failed to parse hart ID for context %d.\n", i); |
| continue; |
| } |
| |
| cpu = riscv_hartid_to_cpuid(hartid); |
| if (cpu < 0) { |
| pr_warn("Invalid cpuid for context %d\n", i); |
| continue; |
| } |
| |
| /* Find parent domain and register chained handler */ |
| if (!plic_parent_irq && irq_find_host(parent.np)) { |
| plic_parent_irq = irq_of_parse_and_map(node, i); |
| if (plic_parent_irq) |
| irq_set_chained_handler(plic_parent_irq, |
| plic_handle_irq); |
| } |
| |
| /* |
| * When running in M-mode we need to ignore the S-mode handler. |
| * Here we assume it always comes later, but that might be a |
| * little fragile. |
| */ |
| handler = per_cpu_ptr(&plic_handlers, cpu); |
| if (handler->present) { |
| pr_warn("handler already present for context %d.\n", i); |
| plic_set_threshold(handler, PLIC_DISABLE_THRESHOLD); |
| goto done; |
| } |
| |
| cpumask_set_cpu(cpu, &priv->lmask); |
| handler->present = true; |
| handler->hart_base = priv->regs + CONTEXT_BASE + |
| i * CONTEXT_SIZE; |
| raw_spin_lock_init(&handler->enable_lock); |
| handler->enable_base = priv->regs + CONTEXT_ENABLE_BASE + |
| i * CONTEXT_ENABLE_SIZE; |
| handler->priv = priv; |
| done: |
| for (hwirq = 1; hwirq <= nr_irqs; hwirq++) { |
| plic_toggle(handler, hwirq, 0); |
| writel(1, priv->regs + PRIORITY_BASE + |
| hwirq * PRIORITY_PER_ID); |
| } |
| nr_handlers++; |
| } |
| |
| /* |
| * We can have multiple PLIC instances so setup cpuhp state only |
| * when context handler for current/boot CPU is present. |
| */ |
| handler = this_cpu_ptr(&plic_handlers); |
| if (handler->present && !plic_cpuhp_setup_done) { |
| cpuhp_setup_state(CPUHP_AP_IRQ_SIFIVE_PLIC_STARTING, |
| "irqchip/sifive/plic:starting", |
| plic_starting_cpu, plic_dying_cpu); |
| plic_cpuhp_setup_done = true; |
| } |
| |
| pr_info("%pOFP: mapped %d interrupts with %d handlers for" |
| " %d contexts.\n", node, nr_irqs, nr_handlers, nr_contexts); |
| return 0; |
| |
| out_iounmap: |
| iounmap(priv->regs); |
| out_free_priv: |
| kfree(priv); |
| return error; |
| } |
| |
| static int __init plic_init(struct device_node *node, |
| struct device_node *parent) |
| { |
| return __plic_init(node, parent, 0); |
| } |
| |
| IRQCHIP_DECLARE(sifive_plic, "sifive,plic-1.0.0", plic_init); |
| IRQCHIP_DECLARE(riscv_plic0, "riscv,plic0", plic_init); /* for legacy systems */ |
| |
| static int __init plic_edge_init(struct device_node *node, |
| struct device_node *parent) |
| { |
| return __plic_init(node, parent, BIT(PLIC_QUIRK_EDGE_INTERRUPT)); |
| } |
| |
| IRQCHIP_DECLARE(andestech_nceplic100, "andestech,nceplic100", plic_edge_init); |
| IRQCHIP_DECLARE(thead_c900_plic, "thead,c900-plic", plic_edge_init); |