| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * I2C driver for Renesas Synchronization Management Unit (SMU) devices. |
| * |
| * Copyright (C) 2021 Integrated Device Technology, Inc., a Renesas Company. |
| */ |
| |
| #include <linux/i2c.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/mfd/core.h> |
| #include <linux/mfd/rsmu.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/regmap.h> |
| #include <linux/slab.h> |
| |
| #include "rsmu.h" |
| |
| /* |
| * 16-bit register address: the lower 8 bits of the register address come |
| * from the offset addr byte and the upper 8 bits come from the page register. |
| */ |
| #define RSMU_CM_PAGE_ADDR 0xFD |
| #define RSMU_CM_PAGE_WINDOW 256 |
| |
| /* |
| * 15-bit register address: the lower 7 bits of the register address come |
| * from the offset addr byte and the upper 8 bits come from the page register. |
| */ |
| #define RSMU_SABRE_PAGE_ADDR 0x7F |
| #define RSMU_SABRE_PAGE_WINDOW 128 |
| |
| static const struct regmap_range_cfg rsmu_cm_range_cfg[] = { |
| { |
| .range_min = 0, |
| .range_max = 0xD000, |
| .selector_reg = RSMU_CM_PAGE_ADDR, |
| .selector_mask = 0xFF, |
| .selector_shift = 0, |
| .window_start = 0, |
| .window_len = RSMU_CM_PAGE_WINDOW, |
| } |
| }; |
| |
| static const struct regmap_range_cfg rsmu_sabre_range_cfg[] = { |
| { |
| .range_min = 0, |
| .range_max = 0x400, |
| .selector_reg = RSMU_SABRE_PAGE_ADDR, |
| .selector_mask = 0xFF, |
| .selector_shift = 0, |
| .window_start = 0, |
| .window_len = RSMU_SABRE_PAGE_WINDOW, |
| } |
| }; |
| |
| static bool rsmu_cm_volatile_reg(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case RSMU_CM_PAGE_ADDR: |
| return false; |
| default: |
| return true; |
| } |
| } |
| |
| static bool rsmu_sabre_volatile_reg(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case RSMU_SABRE_PAGE_ADDR: |
| return false; |
| default: |
| return true; |
| } |
| } |
| |
| static const struct regmap_config rsmu_cm_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .max_register = 0xD000, |
| .ranges = rsmu_cm_range_cfg, |
| .num_ranges = ARRAY_SIZE(rsmu_cm_range_cfg), |
| .volatile_reg = rsmu_cm_volatile_reg, |
| .cache_type = REGCACHE_RBTREE, |
| .can_multi_write = true, |
| }; |
| |
| static const struct regmap_config rsmu_sabre_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .max_register = 0x400, |
| .ranges = rsmu_sabre_range_cfg, |
| .num_ranges = ARRAY_SIZE(rsmu_sabre_range_cfg), |
| .volatile_reg = rsmu_sabre_volatile_reg, |
| .cache_type = REGCACHE_RBTREE, |
| .can_multi_write = true, |
| }; |
| |
| static const struct regmap_config rsmu_sl_regmap_config = { |
| .reg_bits = 16, |
| .val_bits = 8, |
| .reg_format_endian = REGMAP_ENDIAN_BIG, |
| .max_register = 0x339, |
| .cache_type = REGCACHE_NONE, |
| .can_multi_write = true, |
| }; |
| |
| static int rsmu_i2c_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| const struct regmap_config *cfg; |
| struct rsmu_ddata *rsmu; |
| int ret; |
| |
| rsmu = devm_kzalloc(&client->dev, sizeof(*rsmu), GFP_KERNEL); |
| if (!rsmu) |
| return -ENOMEM; |
| |
| i2c_set_clientdata(client, rsmu); |
| |
| rsmu->dev = &client->dev; |
| rsmu->type = (enum rsmu_type)id->driver_data; |
| |
| switch (rsmu->type) { |
| case RSMU_CM: |
| cfg = &rsmu_cm_regmap_config; |
| break; |
| case RSMU_SABRE: |
| cfg = &rsmu_sabre_regmap_config; |
| break; |
| case RSMU_SL: |
| cfg = &rsmu_sl_regmap_config; |
| break; |
| default: |
| dev_err(rsmu->dev, "Unsupported RSMU device type: %d\n", rsmu->type); |
| return -ENODEV; |
| } |
| rsmu->regmap = devm_regmap_init_i2c(client, cfg); |
| if (IS_ERR(rsmu->regmap)) { |
| ret = PTR_ERR(rsmu->regmap); |
| dev_err(rsmu->dev, "Failed to allocate register map: %d\n", ret); |
| return ret; |
| } |
| |
| return rsmu_core_init(rsmu); |
| } |
| |
| static void rsmu_i2c_remove(struct i2c_client *client) |
| { |
| struct rsmu_ddata *rsmu = i2c_get_clientdata(client); |
| |
| rsmu_core_exit(rsmu); |
| } |
| |
| static const struct i2c_device_id rsmu_i2c_id[] = { |
| { "8a34000", RSMU_CM }, |
| { "8a34001", RSMU_CM }, |
| { "82p33810", RSMU_SABRE }, |
| { "82p33811", RSMU_SABRE }, |
| { "8v19n850", RSMU_SL }, |
| { "8v19n851", RSMU_SL }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(i2c, rsmu_i2c_id); |
| |
| static const struct of_device_id rsmu_i2c_of_match[] = { |
| { .compatible = "idt,8a34000", .data = (void *)RSMU_CM }, |
| { .compatible = "idt,8a34001", .data = (void *)RSMU_CM }, |
| { .compatible = "idt,82p33810", .data = (void *)RSMU_SABRE }, |
| { .compatible = "idt,82p33811", .data = (void *)RSMU_SABRE }, |
| { .compatible = "idt,8v19n850", .data = (void *)RSMU_SL }, |
| { .compatible = "idt,8v19n851", .data = (void *)RSMU_SL }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, rsmu_i2c_of_match); |
| |
| static struct i2c_driver rsmu_i2c_driver = { |
| .driver = { |
| .name = "rsmu-i2c", |
| .of_match_table = of_match_ptr(rsmu_i2c_of_match), |
| }, |
| .probe = rsmu_i2c_probe, |
| .remove = rsmu_i2c_remove, |
| .id_table = rsmu_i2c_id, |
| }; |
| |
| static int __init rsmu_i2c_init(void) |
| { |
| return i2c_add_driver(&rsmu_i2c_driver); |
| } |
| subsys_initcall(rsmu_i2c_init); |
| |
| static void __exit rsmu_i2c_exit(void) |
| { |
| i2c_del_driver(&rsmu_i2c_driver); |
| } |
| module_exit(rsmu_i2c_exit); |
| |
| MODULE_DESCRIPTION("Renesas SMU I2C driver"); |
| MODULE_LICENSE("GPL"); |