| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * asus-laptop.c - Asus Laptop Support |
| * |
| * Copyright (C) 2002-2005 Julien Lerouge, 2003-2006 Karol Kozimor |
| * Copyright (C) 2006-2007 Corentin Chary |
| * Copyright (C) 2011 Wind River Systems |
| * |
| * The development page for this driver is located at |
| * http://sourceforge.net/projects/acpi4asus/ |
| * |
| * Credits: |
| * Pontus Fuchs - Helper functions, cleanup |
| * Johann Wiesner - Small compile fixes |
| * John Belmonte - ACPI code for Toshiba laptop was a good starting point. |
| * Eric Burghard - LED display support for W1N |
| * Josh Green - Light Sens support |
| * Thomas Tuttle - His first patch for led support was very helpful |
| * Sam Lin - GPS support |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/types.h> |
| #include <linux/err.h> |
| #include <linux/proc_fs.h> |
| #include <linux/backlight.h> |
| #include <linux/fb.h> |
| #include <linux/leds.h> |
| #include <linux/platform_device.h> |
| #include <linux/uaccess.h> |
| #include <linux/input.h> |
| #include <linux/input/sparse-keymap.h> |
| #include <linux/rfkill.h> |
| #include <linux/slab.h> |
| #include <linux/dmi.h> |
| #include <linux/acpi.h> |
| #include <acpi/video.h> |
| |
| #define ASUS_LAPTOP_VERSION "0.42" |
| |
| #define ASUS_LAPTOP_NAME "Asus Laptop Support" |
| #define ASUS_LAPTOP_CLASS "hotkey" |
| #define ASUS_LAPTOP_DEVICE_NAME "Hotkey" |
| #define ASUS_LAPTOP_FILE KBUILD_MODNAME |
| #define ASUS_LAPTOP_PREFIX "\\_SB.ATKD." |
| |
| MODULE_AUTHOR("Julien Lerouge, Karol Kozimor, Corentin Chary"); |
| MODULE_DESCRIPTION(ASUS_LAPTOP_NAME); |
| MODULE_LICENSE("GPL"); |
| |
| /* |
| * WAPF defines the behavior of the Fn+Fx wlan key |
| * The significance of values is yet to be found, but |
| * most of the time: |
| * Bit | Bluetooth | WLAN |
| * 0 | Hardware | Hardware |
| * 1 | Hardware | Software |
| * 4 | Software | Software |
| */ |
| static uint wapf = 1; |
| module_param(wapf, uint, 0444); |
| MODULE_PARM_DESC(wapf, "WAPF value"); |
| |
| static char *wled_type = "unknown"; |
| static char *bled_type = "unknown"; |
| |
| module_param(wled_type, charp, 0444); |
| MODULE_PARM_DESC(wled_type, "Set the wled type on boot " |
| "(unknown, led or rfkill). " |
| "default is unknown"); |
| |
| module_param(bled_type, charp, 0444); |
| MODULE_PARM_DESC(bled_type, "Set the bled type on boot " |
| "(unknown, led or rfkill). " |
| "default is unknown"); |
| |
| static int wlan_status = 1; |
| static int bluetooth_status = 1; |
| static int wimax_status = -1; |
| static int wwan_status = -1; |
| static int als_status; |
| |
| module_param(wlan_status, int, 0444); |
| MODULE_PARM_DESC(wlan_status, "Set the wireless status on boot " |
| "(0 = disabled, 1 = enabled, -1 = don't do anything). " |
| "default is -1"); |
| |
| module_param(bluetooth_status, int, 0444); |
| MODULE_PARM_DESC(bluetooth_status, "Set the wireless status on boot " |
| "(0 = disabled, 1 = enabled, -1 = don't do anything). " |
| "default is -1"); |
| |
| module_param(wimax_status, int, 0444); |
| MODULE_PARM_DESC(wimax_status, "Set the wireless status on boot " |
| "(0 = disabled, 1 = enabled, -1 = don't do anything). " |
| "default is -1"); |
| |
| module_param(wwan_status, int, 0444); |
| MODULE_PARM_DESC(wwan_status, "Set the wireless status on boot " |
| "(0 = disabled, 1 = enabled, -1 = don't do anything). " |
| "default is -1"); |
| |
| module_param(als_status, int, 0444); |
| MODULE_PARM_DESC(als_status, "Set the ALS status on boot " |
| "(0 = disabled, 1 = enabled). " |
| "default is 0"); |
| |
| /* |
| * Some events we use, same for all Asus |
| */ |
| #define ATKD_BRNUP_MIN 0x10 |
| #define ATKD_BRNUP_MAX 0x1f |
| #define ATKD_BRNDOWN_MIN 0x20 |
| #define ATKD_BRNDOWN_MAX 0x2f |
| #define ATKD_BRNDOWN 0x20 |
| #define ATKD_BRNUP 0x2f |
| #define ATKD_LCD_ON 0x33 |
| #define ATKD_LCD_OFF 0x34 |
| |
| /* |
| * Known bits returned by \_SB.ATKD.HWRS |
| */ |
| #define WL_HWRS 0x80 |
| #define BT_HWRS 0x100 |
| |
| /* |
| * Flags for hotk status |
| * WL_ON and BT_ON are also used for wireless_status() |
| */ |
| #define WL_RSTS 0x01 /* internal Wifi */ |
| #define BT_RSTS 0x02 /* internal Bluetooth */ |
| #define WM_RSTS 0x08 /* internal wimax */ |
| #define WW_RSTS 0x20 /* internal wwan */ |
| |
| /* WLED and BLED type */ |
| #define TYPE_UNKNOWN 0 |
| #define TYPE_LED 1 |
| #define TYPE_RFKILL 2 |
| |
| /* LED */ |
| #define METHOD_MLED "MLED" |
| #define METHOD_TLED "TLED" |
| #define METHOD_RLED "RLED" /* W1JC */ |
| #define METHOD_PLED "PLED" /* A7J */ |
| #define METHOD_GLED "GLED" /* G1, G2 (probably) */ |
| |
| /* LEDD */ |
| #define METHOD_LEDD "SLCM" |
| |
| /* |
| * Bluetooth and WLAN |
| * WLED and BLED are not handled like other XLED, because in some dsdt |
| * they also control the WLAN/Bluetooth device. |
| */ |
| #define METHOD_WLAN "WLED" |
| #define METHOD_BLUETOOTH "BLED" |
| |
| /* WWAN and WIMAX */ |
| #define METHOD_WWAN "GSMC" |
| #define METHOD_WIMAX "WMXC" |
| |
| #define METHOD_WL_STATUS "RSTS" |
| |
| /* Brightness */ |
| #define METHOD_BRIGHTNESS_SET "SPLV" |
| #define METHOD_BRIGHTNESS_GET "GPLV" |
| |
| /* Display */ |
| #define METHOD_SWITCH_DISPLAY "SDSP" |
| |
| #define METHOD_ALS_CONTROL "ALSC" /* Z71A Z71V */ |
| #define METHOD_ALS_LEVEL "ALSL" /* Z71A Z71V */ |
| |
| /* GPS */ |
| /* R2H use different handle for GPS on/off */ |
| #define METHOD_GPS_ON "SDON" |
| #define METHOD_GPS_OFF "SDOF" |
| #define METHOD_GPS_STATUS "GPST" |
| |
| /* Keyboard light */ |
| #define METHOD_KBD_LIGHT_SET "SLKB" |
| #define METHOD_KBD_LIGHT_GET "GLKB" |
| |
| /* For Pegatron Lucid tablet */ |
| #define DEVICE_NAME_PEGA "Lucid" |
| |
| #define METHOD_PEGA_ENABLE "ENPR" |
| #define METHOD_PEGA_DISABLE "DAPR" |
| #define PEGA_WLAN 0x00 |
| #define PEGA_BLUETOOTH 0x01 |
| #define PEGA_WWAN 0x02 |
| #define PEGA_ALS 0x04 |
| #define PEGA_ALS_POWER 0x05 |
| |
| #define METHOD_PEGA_READ "RDLN" |
| #define PEGA_READ_ALS_H 0x02 |
| #define PEGA_READ_ALS_L 0x03 |
| |
| #define PEGA_ACCEL_NAME "pega_accel" |
| #define PEGA_ACCEL_DESC "Pegatron Lucid Tablet Accelerometer" |
| #define METHOD_XLRX "XLRX" |
| #define METHOD_XLRY "XLRY" |
| #define METHOD_XLRZ "XLRZ" |
| #define PEGA_ACC_CLAMP 512 /* 1G accel is reported as ~256, so clamp to 2G */ |
| #define PEGA_ACC_RETRIES 3 |
| |
| /* |
| * Define a specific led structure to keep the main structure clean |
| */ |
| struct asus_led { |
| int wk; |
| struct work_struct work; |
| struct led_classdev led; |
| struct asus_laptop *asus; |
| const char *method; |
| }; |
| |
| /* |
| * Same thing for rfkill |
| */ |
| struct asus_rfkill { |
| /* type of control. Maps to PEGA_* values or *_RSTS */ |
| int control_id; |
| struct rfkill *rfkill; |
| struct asus_laptop *asus; |
| }; |
| |
| /* |
| * This is the main structure, we can use it to store anything interesting |
| * about the hotk device |
| */ |
| struct asus_laptop { |
| char *name; /* laptop name */ |
| |
| struct acpi_table_header *dsdt_info; |
| struct platform_device *platform_device; |
| struct acpi_device *device; /* the device we are in */ |
| struct backlight_device *backlight_device; |
| |
| struct input_dev *inputdev; |
| struct key_entry *keymap; |
| struct input_dev *pega_accel_poll; |
| |
| struct asus_led wled; |
| struct asus_led bled; |
| struct asus_led mled; |
| struct asus_led tled; |
| struct asus_led rled; |
| struct asus_led pled; |
| struct asus_led gled; |
| struct asus_led kled; |
| struct workqueue_struct *led_workqueue; |
| |
| int wled_type; |
| int bled_type; |
| int wireless_status; |
| bool have_rsts; |
| bool is_pega_lucid; |
| bool pega_acc_live; |
| int pega_acc_x; |
| int pega_acc_y; |
| int pega_acc_z; |
| |
| struct asus_rfkill wlan; |
| struct asus_rfkill bluetooth; |
| struct asus_rfkill wwan; |
| struct asus_rfkill wimax; |
| struct asus_rfkill gps; |
| |
| acpi_handle handle; /* the handle of the hotk device */ |
| u32 ledd_status; /* status of the LED display */ |
| u8 light_level; /* light sensor level */ |
| u8 light_switch; /* light sensor switch value */ |
| u16 event_count[128]; /* count for each event TODO make this better */ |
| }; |
| |
| static const struct key_entry asus_keymap[] = { |
| /* Lenovo SL Specific keycodes */ |
| {KE_KEY, 0x02, { KEY_SCREENLOCK } }, |
| {KE_KEY, 0x05, { KEY_WLAN } }, |
| {KE_KEY, 0x08, { KEY_F13 } }, |
| {KE_KEY, 0x09, { KEY_PROG2 } }, /* Dock */ |
| {KE_KEY, 0x17, { KEY_ZOOM } }, |
| {KE_KEY, 0x1f, { KEY_BATTERY } }, |
| /* End of Lenovo SL Specific keycodes */ |
| {KE_KEY, ATKD_BRNDOWN, { KEY_BRIGHTNESSDOWN } }, |
| {KE_KEY, ATKD_BRNUP, { KEY_BRIGHTNESSUP } }, |
| {KE_KEY, 0x30, { KEY_VOLUMEUP } }, |
| {KE_KEY, 0x31, { KEY_VOLUMEDOWN } }, |
| {KE_KEY, 0x32, { KEY_MUTE } }, |
| {KE_KEY, 0x33, { KEY_DISPLAYTOGGLE } }, /* LCD on */ |
| {KE_KEY, 0x34, { KEY_DISPLAY_OFF } }, /* LCD off */ |
| {KE_KEY, 0x40, { KEY_PREVIOUSSONG } }, |
| {KE_KEY, 0x41, { KEY_NEXTSONG } }, |
| {KE_KEY, 0x43, { KEY_STOPCD } }, /* Stop/Eject */ |
| {KE_KEY, 0x45, { KEY_PLAYPAUSE } }, |
| {KE_KEY, 0x4c, { KEY_MEDIA } }, /* WMP Key */ |
| {KE_KEY, 0x50, { KEY_EMAIL } }, |
| {KE_KEY, 0x51, { KEY_WWW } }, |
| {KE_KEY, 0x55, { KEY_CALC } }, |
| {KE_IGNORE, 0x57, }, /* Battery mode */ |
| {KE_IGNORE, 0x58, }, /* AC mode */ |
| {KE_KEY, 0x5C, { KEY_SCREENLOCK } }, /* Screenlock */ |
| {KE_KEY, 0x5D, { KEY_WLAN } }, /* WLAN Toggle */ |
| {KE_KEY, 0x5E, { KEY_WLAN } }, /* WLAN Enable */ |
| {KE_KEY, 0x5F, { KEY_WLAN } }, /* WLAN Disable */ |
| {KE_KEY, 0x60, { KEY_TOUCHPAD_ON } }, |
| {KE_KEY, 0x61, { KEY_SWITCHVIDEOMODE } }, /* SDSP LCD only */ |
| {KE_KEY, 0x62, { KEY_SWITCHVIDEOMODE } }, /* SDSP CRT only */ |
| {KE_KEY, 0x63, { KEY_SWITCHVIDEOMODE } }, /* SDSP LCD + CRT */ |
| {KE_KEY, 0x64, { KEY_SWITCHVIDEOMODE } }, /* SDSP TV */ |
| {KE_KEY, 0x65, { KEY_SWITCHVIDEOMODE } }, /* SDSP LCD + TV */ |
| {KE_KEY, 0x66, { KEY_SWITCHVIDEOMODE } }, /* SDSP CRT + TV */ |
| {KE_KEY, 0x67, { KEY_SWITCHVIDEOMODE } }, /* SDSP LCD + CRT + TV */ |
| {KE_KEY, 0x6A, { KEY_TOUCHPAD_TOGGLE } }, /* Lock Touchpad Fn + F9 */ |
| {KE_KEY, 0x6B, { KEY_TOUCHPAD_TOGGLE } }, /* Lock Touchpad */ |
| {KE_KEY, 0x6C, { KEY_SLEEP } }, /* Suspend */ |
| {KE_KEY, 0x6D, { KEY_SLEEP } }, /* Hibernate */ |
| {KE_IGNORE, 0x6E, }, /* Low Battery notification */ |
| {KE_KEY, 0x7D, { KEY_BLUETOOTH } }, /* Bluetooth Enable */ |
| {KE_KEY, 0x7E, { KEY_BLUETOOTH } }, /* Bluetooth Disable */ |
| {KE_KEY, 0x82, { KEY_CAMERA } }, |
| {KE_KEY, 0x88, { KEY_RFKILL } }, /* Radio Toggle Key */ |
| {KE_KEY, 0x8A, { KEY_PROG1 } }, /* Color enhancement mode */ |
| {KE_KEY, 0x8C, { KEY_SWITCHVIDEOMODE } }, /* SDSP DVI only */ |
| {KE_KEY, 0x8D, { KEY_SWITCHVIDEOMODE } }, /* SDSP LCD + DVI */ |
| {KE_KEY, 0x8E, { KEY_SWITCHVIDEOMODE } }, /* SDSP CRT + DVI */ |
| {KE_KEY, 0x8F, { KEY_SWITCHVIDEOMODE } }, /* SDSP TV + DVI */ |
| {KE_KEY, 0x90, { KEY_SWITCHVIDEOMODE } }, /* SDSP LCD + CRT + DVI */ |
| {KE_KEY, 0x91, { KEY_SWITCHVIDEOMODE } }, /* SDSP LCD + TV + DVI */ |
| {KE_KEY, 0x92, { KEY_SWITCHVIDEOMODE } }, /* SDSP CRT + TV + DVI */ |
| {KE_KEY, 0x93, { KEY_SWITCHVIDEOMODE } }, /* SDSP LCD + CRT + TV + DVI */ |
| {KE_KEY, 0x95, { KEY_MEDIA } }, |
| {KE_KEY, 0x99, { KEY_PHONE } }, |
| {KE_KEY, 0xA0, { KEY_SWITCHVIDEOMODE } }, /* SDSP HDMI only */ |
| {KE_KEY, 0xA1, { KEY_SWITCHVIDEOMODE } }, /* SDSP LCD + HDMI */ |
| {KE_KEY, 0xA2, { KEY_SWITCHVIDEOMODE } }, /* SDSP CRT + HDMI */ |
| {KE_KEY, 0xA3, { KEY_SWITCHVIDEOMODE } }, /* SDSP TV + HDMI */ |
| {KE_KEY, 0xA4, { KEY_SWITCHVIDEOMODE } }, /* SDSP LCD + CRT + HDMI */ |
| {KE_KEY, 0xA5, { KEY_SWITCHVIDEOMODE } }, /* SDSP LCD + TV + HDMI */ |
| {KE_KEY, 0xA6, { KEY_SWITCHVIDEOMODE } }, /* SDSP CRT + TV + HDMI */ |
| {KE_KEY, 0xA7, { KEY_SWITCHVIDEOMODE } }, /* SDSP LCD + CRT + TV + HDMI */ |
| {KE_KEY, 0xB5, { KEY_CALC } }, |
| {KE_KEY, 0xC4, { KEY_KBDILLUMUP } }, |
| {KE_KEY, 0xC5, { KEY_KBDILLUMDOWN } }, |
| {KE_END, 0}, |
| }; |
| |
| |
| /* |
| * This function evaluates an ACPI method, given an int as parameter, the |
| * method is searched within the scope of the handle, can be NULL. The output |
| * of the method is written is output, which can also be NULL |
| * |
| * returns 0 if write is successful, -1 else. |
| */ |
| static int write_acpi_int_ret(acpi_handle handle, const char *method, int val, |
| struct acpi_buffer *output) |
| { |
| struct acpi_object_list params; /* list of input parameters (an int) */ |
| union acpi_object in_obj; /* the only param we use */ |
| acpi_status status; |
| |
| if (!handle) |
| return -1; |
| |
| params.count = 1; |
| params.pointer = &in_obj; |
| in_obj.type = ACPI_TYPE_INTEGER; |
| in_obj.integer.value = val; |
| |
| status = acpi_evaluate_object(handle, (char *)method, ¶ms, output); |
| if (status == AE_OK) |
| return 0; |
| else |
| return -1; |
| } |
| |
| static int write_acpi_int(acpi_handle handle, const char *method, int val) |
| { |
| return write_acpi_int_ret(handle, method, val, NULL); |
| } |
| |
| static int acpi_check_handle(acpi_handle handle, const char *method, |
| acpi_handle *ret) |
| { |
| acpi_status status; |
| |
| if (method == NULL) |
| return -ENODEV; |
| |
| if (ret) |
| status = acpi_get_handle(handle, (char *)method, |
| ret); |
| else { |
| acpi_handle dummy; |
| |
| status = acpi_get_handle(handle, (char *)method, |
| &dummy); |
| } |
| |
| if (status != AE_OK) { |
| if (ret) |
| pr_warn("Error finding %s\n", method); |
| return -ENODEV; |
| } |
| return 0; |
| } |
| |
| static bool asus_check_pega_lucid(struct asus_laptop *asus) |
| { |
| return !strcmp(asus->name, DEVICE_NAME_PEGA) && |
| !acpi_check_handle(asus->handle, METHOD_PEGA_ENABLE, NULL) && |
| !acpi_check_handle(asus->handle, METHOD_PEGA_DISABLE, NULL) && |
| !acpi_check_handle(asus->handle, METHOD_PEGA_READ, NULL); |
| } |
| |
| static int asus_pega_lucid_set(struct asus_laptop *asus, int unit, bool enable) |
| { |
| char *method = enable ? METHOD_PEGA_ENABLE : METHOD_PEGA_DISABLE; |
| return write_acpi_int(asus->handle, method, unit); |
| } |
| |
| static int pega_acc_axis(struct asus_laptop *asus, int curr, char *method) |
| { |
| int i, delta; |
| unsigned long long val; |
| for (i = 0; i < PEGA_ACC_RETRIES; i++) { |
| acpi_evaluate_integer(asus->handle, method, NULL, &val); |
| |
| /* The output is noisy. From reading the ASL |
| * dissassembly, timeout errors are returned with 1's |
| * in the high word, and the lack of locking around |
| * thei hi/lo byte reads means that a transition |
| * between (for example) -1 and 0 could be read as |
| * 0xff00 or 0x00ff. */ |
| delta = abs(curr - (short)val); |
| if (delta < 128 && !(val & ~0xffff)) |
| break; |
| } |
| return clamp_val((short)val, -PEGA_ACC_CLAMP, PEGA_ACC_CLAMP); |
| } |
| |
| static void pega_accel_poll(struct input_dev *input) |
| { |
| struct device *parent = input->dev.parent; |
| struct asus_laptop *asus = dev_get_drvdata(parent); |
| |
| /* In some cases, the very first call to poll causes a |
| * recursive fault under the polldev worker. This is |
| * apparently related to very early userspace access to the |
| * device, and perhaps a firmware bug. Fake the first report. */ |
| if (!asus->pega_acc_live) { |
| asus->pega_acc_live = true; |
| input_report_abs(input, ABS_X, 0); |
| input_report_abs(input, ABS_Y, 0); |
| input_report_abs(input, ABS_Z, 0); |
| input_sync(input); |
| return; |
| } |
| |
| asus->pega_acc_x = pega_acc_axis(asus, asus->pega_acc_x, METHOD_XLRX); |
| asus->pega_acc_y = pega_acc_axis(asus, asus->pega_acc_y, METHOD_XLRY); |
| asus->pega_acc_z = pega_acc_axis(asus, asus->pega_acc_z, METHOD_XLRZ); |
| |
| /* Note transform, convert to "right/up/out" in the native |
| * landscape orientation (i.e. the vector is the direction of |
| * "real up" in the device's cartiesian coordinates). */ |
| input_report_abs(input, ABS_X, -asus->pega_acc_x); |
| input_report_abs(input, ABS_Y, -asus->pega_acc_y); |
| input_report_abs(input, ABS_Z, asus->pega_acc_z); |
| input_sync(input); |
| } |
| |
| static void pega_accel_exit(struct asus_laptop *asus) |
| { |
| if (asus->pega_accel_poll) { |
| input_unregister_device(asus->pega_accel_poll); |
| asus->pega_accel_poll = NULL; |
| } |
| } |
| |
| static int pega_accel_init(struct asus_laptop *asus) |
| { |
| int err; |
| struct input_dev *input; |
| |
| if (!asus->is_pega_lucid) |
| return -ENODEV; |
| |
| if (acpi_check_handle(asus->handle, METHOD_XLRX, NULL) || |
| acpi_check_handle(asus->handle, METHOD_XLRY, NULL) || |
| acpi_check_handle(asus->handle, METHOD_XLRZ, NULL)) |
| return -ENODEV; |
| |
| input = input_allocate_device(); |
| if (!input) |
| return -ENOMEM; |
| |
| input->name = PEGA_ACCEL_DESC; |
| input->phys = PEGA_ACCEL_NAME "/input0"; |
| input->dev.parent = &asus->platform_device->dev; |
| input->id.bustype = BUS_HOST; |
| |
| input_set_abs_params(input, ABS_X, |
| -PEGA_ACC_CLAMP, PEGA_ACC_CLAMP, 0, 0); |
| input_set_abs_params(input, ABS_Y, |
| -PEGA_ACC_CLAMP, PEGA_ACC_CLAMP, 0, 0); |
| input_set_abs_params(input, ABS_Z, |
| -PEGA_ACC_CLAMP, PEGA_ACC_CLAMP, 0, 0); |
| |
| err = input_setup_polling(input, pega_accel_poll); |
| if (err) |
| goto exit; |
| |
| input_set_poll_interval(input, 125); |
| input_set_min_poll_interval(input, 50); |
| input_set_max_poll_interval(input, 2000); |
| |
| err = input_register_device(input); |
| if (err) |
| goto exit; |
| |
| asus->pega_accel_poll = input; |
| return 0; |
| |
| exit: |
| input_free_device(input); |
| return err; |
| } |
| |
| /* Generic LED function */ |
| static int asus_led_set(struct asus_laptop *asus, const char *method, |
| int value) |
| { |
| if (!strcmp(method, METHOD_MLED)) |
| value = !value; |
| else if (!strcmp(method, METHOD_GLED)) |
| value = !value + 1; |
| else |
| value = !!value; |
| |
| return write_acpi_int(asus->handle, method, value); |
| } |
| |
| /* |
| * LEDs |
| */ |
| /* /sys/class/led handlers */ |
| static void asus_led_cdev_set(struct led_classdev *led_cdev, |
| enum led_brightness value) |
| { |
| struct asus_led *led = container_of(led_cdev, struct asus_led, led); |
| struct asus_laptop *asus = led->asus; |
| |
| led->wk = !!value; |
| queue_work(asus->led_workqueue, &led->work); |
| } |
| |
| static void asus_led_cdev_update(struct work_struct *work) |
| { |
| struct asus_led *led = container_of(work, struct asus_led, work); |
| struct asus_laptop *asus = led->asus; |
| |
| asus_led_set(asus, led->method, led->wk); |
| } |
| |
| static enum led_brightness asus_led_cdev_get(struct led_classdev *led_cdev) |
| { |
| return led_cdev->brightness; |
| } |
| |
| /* |
| * Keyboard backlight (also a LED) |
| */ |
| static int asus_kled_lvl(struct asus_laptop *asus) |
| { |
| unsigned long long kblv; |
| struct acpi_object_list params; |
| union acpi_object in_obj; |
| acpi_status rv; |
| |
| params.count = 1; |
| params.pointer = &in_obj; |
| in_obj.type = ACPI_TYPE_INTEGER; |
| in_obj.integer.value = 2; |
| |
| rv = acpi_evaluate_integer(asus->handle, METHOD_KBD_LIGHT_GET, |
| ¶ms, &kblv); |
| if (ACPI_FAILURE(rv)) { |
| pr_warn("Error reading kled level\n"); |
| return -ENODEV; |
| } |
| return kblv; |
| } |
| |
| static int asus_kled_set(struct asus_laptop *asus, int kblv) |
| { |
| if (kblv > 0) |
| kblv = (1 << 7) | (kblv & 0x7F); |
| else |
| kblv = 0; |
| |
| if (write_acpi_int(asus->handle, METHOD_KBD_LIGHT_SET, kblv)) { |
| pr_warn("Keyboard LED display write failed\n"); |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static void asus_kled_cdev_set(struct led_classdev *led_cdev, |
| enum led_brightness value) |
| { |
| struct asus_led *led = container_of(led_cdev, struct asus_led, led); |
| struct asus_laptop *asus = led->asus; |
| |
| led->wk = value; |
| queue_work(asus->led_workqueue, &led->work); |
| } |
| |
| static void asus_kled_cdev_update(struct work_struct *work) |
| { |
| struct asus_led *led = container_of(work, struct asus_led, work); |
| struct asus_laptop *asus = led->asus; |
| |
| asus_kled_set(asus, led->wk); |
| } |
| |
| static enum led_brightness asus_kled_cdev_get(struct led_classdev *led_cdev) |
| { |
| struct asus_led *led = container_of(led_cdev, struct asus_led, led); |
| struct asus_laptop *asus = led->asus; |
| |
| return asus_kled_lvl(asus); |
| } |
| |
| static void asus_led_exit(struct asus_laptop *asus) |
| { |
| led_classdev_unregister(&asus->wled.led); |
| led_classdev_unregister(&asus->bled.led); |
| led_classdev_unregister(&asus->mled.led); |
| led_classdev_unregister(&asus->tled.led); |
| led_classdev_unregister(&asus->pled.led); |
| led_classdev_unregister(&asus->rled.led); |
| led_classdev_unregister(&asus->gled.led); |
| led_classdev_unregister(&asus->kled.led); |
| |
| if (asus->led_workqueue) { |
| destroy_workqueue(asus->led_workqueue); |
| asus->led_workqueue = NULL; |
| } |
| } |
| |
| /* Ugly macro, need to fix that later */ |
| static int asus_led_register(struct asus_laptop *asus, |
| struct asus_led *led, |
| const char *name, const char *method) |
| { |
| struct led_classdev *led_cdev = &led->led; |
| |
| if (!method || acpi_check_handle(asus->handle, method, NULL)) |
| return 0; /* Led not present */ |
| |
| led->asus = asus; |
| led->method = method; |
| |
| INIT_WORK(&led->work, asus_led_cdev_update); |
| led_cdev->name = name; |
| led_cdev->brightness_set = asus_led_cdev_set; |
| led_cdev->brightness_get = asus_led_cdev_get; |
| led_cdev->max_brightness = 1; |
| return led_classdev_register(&asus->platform_device->dev, led_cdev); |
| } |
| |
| static int asus_led_init(struct asus_laptop *asus) |
| { |
| int r = 0; |
| |
| /* |
| * The Pegatron Lucid has no physical leds, but all methods are |
| * available in the DSDT... |
| */ |
| if (asus->is_pega_lucid) |
| return 0; |
| |
| /* |
| * Functions that actually update the LED's are called from a |
| * workqueue. By doing this as separate work rather than when the LED |
| * subsystem asks, we avoid messing with the Asus ACPI stuff during a |
| * potentially bad time, such as a timer interrupt. |
| */ |
| asus->led_workqueue = create_singlethread_workqueue("led_workqueue"); |
| if (!asus->led_workqueue) |
| return -ENOMEM; |
| |
| if (asus->wled_type == TYPE_LED) |
| r = asus_led_register(asus, &asus->wled, "asus::wlan", |
| METHOD_WLAN); |
| if (r) |
| goto error; |
| if (asus->bled_type == TYPE_LED) |
| r = asus_led_register(asus, &asus->bled, "asus::bluetooth", |
| METHOD_BLUETOOTH); |
| if (r) |
| goto error; |
| r = asus_led_register(asus, &asus->mled, "asus::mail", METHOD_MLED); |
| if (r) |
| goto error; |
| r = asus_led_register(asus, &asus->tled, "asus::touchpad", METHOD_TLED); |
| if (r) |
| goto error; |
| r = asus_led_register(asus, &asus->rled, "asus::record", METHOD_RLED); |
| if (r) |
| goto error; |
| r = asus_led_register(asus, &asus->pled, "asus::phone", METHOD_PLED); |
| if (r) |
| goto error; |
| r = asus_led_register(asus, &asus->gled, "asus::gaming", METHOD_GLED); |
| if (r) |
| goto error; |
| if (!acpi_check_handle(asus->handle, METHOD_KBD_LIGHT_SET, NULL) && |
| !acpi_check_handle(asus->handle, METHOD_KBD_LIGHT_GET, NULL)) { |
| struct asus_led *led = &asus->kled; |
| struct led_classdev *cdev = &led->led; |
| |
| led->asus = asus; |
| |
| INIT_WORK(&led->work, asus_kled_cdev_update); |
| cdev->name = "asus::kbd_backlight"; |
| cdev->brightness_set = asus_kled_cdev_set; |
| cdev->brightness_get = asus_kled_cdev_get; |
| cdev->max_brightness = 3; |
| r = led_classdev_register(&asus->platform_device->dev, cdev); |
| } |
| error: |
| if (r) |
| asus_led_exit(asus); |
| return r; |
| } |
| |
| /* |
| * Backlight device |
| */ |
| static int asus_read_brightness(struct backlight_device *bd) |
| { |
| struct asus_laptop *asus = bl_get_data(bd); |
| unsigned long long value; |
| acpi_status rv; |
| |
| rv = acpi_evaluate_integer(asus->handle, METHOD_BRIGHTNESS_GET, |
| NULL, &value); |
| if (ACPI_FAILURE(rv)) { |
| pr_warn("Error reading brightness\n"); |
| return 0; |
| } |
| |
| return value; |
| } |
| |
| static int asus_set_brightness(struct backlight_device *bd, int value) |
| { |
| struct asus_laptop *asus = bl_get_data(bd); |
| |
| if (write_acpi_int(asus->handle, METHOD_BRIGHTNESS_SET, value)) { |
| pr_warn("Error changing brightness\n"); |
| return -EIO; |
| } |
| return 0; |
| } |
| |
| static int update_bl_status(struct backlight_device *bd) |
| { |
| int value = bd->props.brightness; |
| |
| return asus_set_brightness(bd, value); |
| } |
| |
| static const struct backlight_ops asusbl_ops = { |
| .get_brightness = asus_read_brightness, |
| .update_status = update_bl_status, |
| }; |
| |
| static int asus_backlight_notify(struct asus_laptop *asus) |
| { |
| struct backlight_device *bd = asus->backlight_device; |
| int old = bd->props.brightness; |
| |
| backlight_force_update(bd, BACKLIGHT_UPDATE_HOTKEY); |
| |
| return old; |
| } |
| |
| static int asus_backlight_init(struct asus_laptop *asus) |
| { |
| struct backlight_device *bd; |
| struct backlight_properties props; |
| |
| if (acpi_check_handle(asus->handle, METHOD_BRIGHTNESS_GET, NULL) || |
| acpi_check_handle(asus->handle, METHOD_BRIGHTNESS_SET, NULL)) |
| return 0; |
| |
| memset(&props, 0, sizeof(struct backlight_properties)); |
| props.max_brightness = 15; |
| props.type = BACKLIGHT_PLATFORM; |
| |
| bd = backlight_device_register(ASUS_LAPTOP_FILE, |
| &asus->platform_device->dev, asus, |
| &asusbl_ops, &props); |
| if (IS_ERR(bd)) { |
| pr_err("Could not register asus backlight device\n"); |
| asus->backlight_device = NULL; |
| return PTR_ERR(bd); |
| } |
| |
| asus->backlight_device = bd; |
| bd->props.brightness = asus_read_brightness(bd); |
| bd->props.power = FB_BLANK_UNBLANK; |
| backlight_update_status(bd); |
| return 0; |
| } |
| |
| static void asus_backlight_exit(struct asus_laptop *asus) |
| { |
| backlight_device_unregister(asus->backlight_device); |
| asus->backlight_device = NULL; |
| } |
| |
| /* |
| * Platform device handlers |
| */ |
| |
| /* |
| * We write our info in page, we begin at offset off and cannot write more |
| * than count bytes. We set eof to 1 if we handle those 2 values. We return the |
| * number of bytes written in page |
| */ |
| static ssize_t infos_show(struct device *dev, struct device_attribute *attr, |
| char *page) |
| { |
| struct asus_laptop *asus = dev_get_drvdata(dev); |
| int len = 0; |
| unsigned long long temp; |
| char buf[16]; /* enough for all info */ |
| acpi_status rv; |
| |
| /* |
| * We use the easy way, we don't care of off and count, |
| * so we don't set eof to 1 |
| */ |
| |
| len += sprintf(page, ASUS_LAPTOP_NAME " " ASUS_LAPTOP_VERSION "\n"); |
| len += sprintf(page + len, "Model reference : %s\n", asus->name); |
| /* |
| * The SFUN method probably allows the original driver to get the list |
| * of features supported by a given model. For now, 0x0100 or 0x0800 |
| * bit signifies that the laptop is equipped with a Wi-Fi MiniPCI card. |
| * The significance of others is yet to be found. |
| */ |
| rv = acpi_evaluate_integer(asus->handle, "SFUN", NULL, &temp); |
| if (ACPI_SUCCESS(rv)) |
| len += sprintf(page + len, "SFUN value : %#x\n", |
| (uint) temp); |
| /* |
| * The HWRS method return informations about the hardware. |
| * 0x80 bit is for WLAN, 0x100 for Bluetooth. |
| * 0x40 for WWAN, 0x10 for WIMAX. |
| * The significance of others is yet to be found. |
| * We don't currently use this for device detection, and it |
| * takes several seconds to run on some systems. |
| */ |
| rv = acpi_evaluate_integer(asus->handle, "HWRS", NULL, &temp); |
| if (ACPI_SUCCESS(rv)) |
| len += sprintf(page + len, "HWRS value : %#x\n", |
| (uint) temp); |
| /* |
| * Another value for userspace: the ASYM method returns 0x02 for |
| * battery low and 0x04 for battery critical, its readings tend to be |
| * more accurate than those provided by _BST. |
| * Note: since not all the laptops provide this method, errors are |
| * silently ignored. |
| */ |
| rv = acpi_evaluate_integer(asus->handle, "ASYM", NULL, &temp); |
| if (ACPI_SUCCESS(rv)) |
| len += sprintf(page + len, "ASYM value : %#x\n", |
| (uint) temp); |
| if (asus->dsdt_info) { |
| snprintf(buf, 16, "%d", asus->dsdt_info->length); |
| len += sprintf(page + len, "DSDT length : %s\n", buf); |
| snprintf(buf, 16, "%d", asus->dsdt_info->checksum); |
| len += sprintf(page + len, "DSDT checksum : %s\n", buf); |
| snprintf(buf, 16, "%d", asus->dsdt_info->revision); |
| len += sprintf(page + len, "DSDT revision : %s\n", buf); |
| snprintf(buf, 7, "%s", asus->dsdt_info->oem_id); |
| len += sprintf(page + len, "OEM id : %s\n", buf); |
| snprintf(buf, 9, "%s", asus->dsdt_info->oem_table_id); |
| len += sprintf(page + len, "OEM table id : %s\n", buf); |
| snprintf(buf, 16, "%x", asus->dsdt_info->oem_revision); |
| len += sprintf(page + len, "OEM revision : 0x%s\n", buf); |
| snprintf(buf, 5, "%s", asus->dsdt_info->asl_compiler_id); |
| len += sprintf(page + len, "ASL comp vendor id : %s\n", buf); |
| snprintf(buf, 16, "%x", asus->dsdt_info->asl_compiler_revision); |
| len += sprintf(page + len, "ASL comp revision : 0x%s\n", buf); |
| } |
| |
| return len; |
| } |
| static DEVICE_ATTR_RO(infos); |
| |
| static ssize_t sysfs_acpi_set(struct asus_laptop *asus, |
| const char *buf, size_t count, |
| const char *method) |
| { |
| int rv, value; |
| |
| rv = kstrtoint(buf, 0, &value); |
| if (rv < 0) |
| return rv; |
| |
| if (write_acpi_int(asus->handle, method, value)) |
| return -ENODEV; |
| return count; |
| } |
| |
| /* |
| * LEDD display |
| */ |
| static ssize_t ledd_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct asus_laptop *asus = dev_get_drvdata(dev); |
| |
| return sprintf(buf, "0x%08x\n", asus->ledd_status); |
| } |
| |
| static ssize_t ledd_store(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct asus_laptop *asus = dev_get_drvdata(dev); |
| int rv, value; |
| |
| rv = kstrtoint(buf, 0, &value); |
| if (rv < 0) |
| return rv; |
| |
| if (write_acpi_int(asus->handle, METHOD_LEDD, value)) { |
| pr_warn("LED display write failed\n"); |
| return -ENODEV; |
| } |
| |
| asus->ledd_status = (u32) value; |
| return count; |
| } |
| static DEVICE_ATTR_RW(ledd); |
| |
| /* |
| * Wireless |
| */ |
| static int asus_wireless_status(struct asus_laptop *asus, int mask) |
| { |
| unsigned long long status; |
| acpi_status rv = AE_OK; |
| |
| if (!asus->have_rsts) |
| return (asus->wireless_status & mask) ? 1 : 0; |
| |
| rv = acpi_evaluate_integer(asus->handle, METHOD_WL_STATUS, |
| NULL, &status); |
| if (ACPI_FAILURE(rv)) { |
| pr_warn("Error reading Wireless status\n"); |
| return -EINVAL; |
| } |
| return !!(status & mask); |
| } |
| |
| /* |
| * WLAN |
| */ |
| static int asus_wlan_set(struct asus_laptop *asus, int status) |
| { |
| if (write_acpi_int(asus->handle, METHOD_WLAN, !!status)) { |
| pr_warn("Error setting wlan status to %d\n", status); |
| return -EIO; |
| } |
| return 0; |
| } |
| |
| static ssize_t wlan_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct asus_laptop *asus = dev_get_drvdata(dev); |
| |
| return sprintf(buf, "%d\n", asus_wireless_status(asus, WL_RSTS)); |
| } |
| |
| static ssize_t wlan_store(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct asus_laptop *asus = dev_get_drvdata(dev); |
| |
| return sysfs_acpi_set(asus, buf, count, METHOD_WLAN); |
| } |
| static DEVICE_ATTR_RW(wlan); |
| |
| /*e |
| * Bluetooth |
| */ |
| static int asus_bluetooth_set(struct asus_laptop *asus, int status) |
| { |
| if (write_acpi_int(asus->handle, METHOD_BLUETOOTH, !!status)) { |
| pr_warn("Error setting bluetooth status to %d\n", status); |
| return -EIO; |
| } |
| return 0; |
| } |
| |
| static ssize_t bluetooth_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct asus_laptop *asus = dev_get_drvdata(dev); |
| |
| return sprintf(buf, "%d\n", asus_wireless_status(asus, BT_RSTS)); |
| } |
| |
| static ssize_t bluetooth_store(struct device *dev, |
| struct device_attribute *attr, const char *buf, |
| size_t count) |
| { |
| struct asus_laptop *asus = dev_get_drvdata(dev); |
| |
| return sysfs_acpi_set(asus, buf, count, METHOD_BLUETOOTH); |
| } |
| static DEVICE_ATTR_RW(bluetooth); |
| |
| /* |
| * Wimax |
| */ |
| static int asus_wimax_set(struct asus_laptop *asus, int status) |
| { |
| if (write_acpi_int(asus->handle, METHOD_WIMAX, !!status)) { |
| pr_warn("Error setting wimax status to %d\n", status); |
| return -EIO; |
| } |
| return 0; |
| } |
| |
| static ssize_t wimax_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct asus_laptop *asus = dev_get_drvdata(dev); |
| |
| return sprintf(buf, "%d\n", asus_wireless_status(asus, WM_RSTS)); |
| } |
| |
| static ssize_t wimax_store(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct asus_laptop *asus = dev_get_drvdata(dev); |
| |
| return sysfs_acpi_set(asus, buf, count, METHOD_WIMAX); |
| } |
| static DEVICE_ATTR_RW(wimax); |
| |
| /* |
| * Wwan |
| */ |
| static int asus_wwan_set(struct asus_laptop *asus, int status) |
| { |
| if (write_acpi_int(asus->handle, METHOD_WWAN, !!status)) { |
| pr_warn("Error setting wwan status to %d\n", status); |
| return -EIO; |
| } |
| return 0; |
| } |
| |
| static ssize_t wwan_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct asus_laptop *asus = dev_get_drvdata(dev); |
| |
| return sprintf(buf, "%d\n", asus_wireless_status(asus, WW_RSTS)); |
| } |
| |
| static ssize_t wwan_store(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct asus_laptop *asus = dev_get_drvdata(dev); |
| |
| return sysfs_acpi_set(asus, buf, count, METHOD_WWAN); |
| } |
| static DEVICE_ATTR_RW(wwan); |
| |
| /* |
| * Display |
| */ |
| static void asus_set_display(struct asus_laptop *asus, int value) |
| { |
| /* no sanity check needed for now */ |
| if (write_acpi_int(asus->handle, METHOD_SWITCH_DISPLAY, value)) |
| pr_warn("Error setting display\n"); |
| return; |
| } |
| |
| /* |
| * Experimental support for display switching. As of now: 1 should activate |
| * the LCD output, 2 should do for CRT, 4 for TV-Out and 8 for DVI. |
| * Any combination (bitwise) of these will suffice. I never actually tested 4 |
| * displays hooked up simultaneously, so be warned. See the acpi4asus README |
| * for more info. |
| */ |
| static ssize_t display_store(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct asus_laptop *asus = dev_get_drvdata(dev); |
| int rv, value; |
| |
| rv = kstrtoint(buf, 0, &value); |
| if (rv < 0) |
| return rv; |
| |
| asus_set_display(asus, value); |
| return count; |
| } |
| static DEVICE_ATTR_WO(display); |
| |
| /* |
| * Light Sens |
| */ |
| static void asus_als_switch(struct asus_laptop *asus, int value) |
| { |
| int ret; |
| |
| if (asus->is_pega_lucid) { |
| ret = asus_pega_lucid_set(asus, PEGA_ALS, value); |
| if (!ret) |
| ret = asus_pega_lucid_set(asus, PEGA_ALS_POWER, value); |
| } else { |
| ret = write_acpi_int(asus->handle, METHOD_ALS_CONTROL, value); |
| } |
| if (ret) |
| pr_warn("Error setting light sensor switch\n"); |
| |
| asus->light_switch = value; |
| } |
| |
| static ssize_t ls_switch_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct asus_laptop *asus = dev_get_drvdata(dev); |
| |
| return sprintf(buf, "%d\n", asus->light_switch); |
| } |
| |
| static ssize_t ls_switch_store(struct device *dev, |
| struct device_attribute *attr, const char *buf, |
| size_t count) |
| { |
| struct asus_laptop *asus = dev_get_drvdata(dev); |
| int rv, value; |
| |
| rv = kstrtoint(buf, 0, &value); |
| if (rv < 0) |
| return rv; |
| |
| asus_als_switch(asus, value ? 1 : 0); |
| return count; |
| } |
| static DEVICE_ATTR_RW(ls_switch); |
| |
| static void asus_als_level(struct asus_laptop *asus, int value) |
| { |
| if (write_acpi_int(asus->handle, METHOD_ALS_LEVEL, value)) |
| pr_warn("Error setting light sensor level\n"); |
| asus->light_level = value; |
| } |
| |
| static ssize_t ls_level_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct asus_laptop *asus = dev_get_drvdata(dev); |
| |
| return sprintf(buf, "%d\n", asus->light_level); |
| } |
| |
| static ssize_t ls_level_store(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct asus_laptop *asus = dev_get_drvdata(dev); |
| int rv, value; |
| |
| rv = kstrtoint(buf, 0, &value); |
| if (rv < 0) |
| return rv; |
| |
| value = (0 < value) ? ((15 < value) ? 15 : value) : 0; |
| /* 0 <= value <= 15 */ |
| asus_als_level(asus, value); |
| |
| return count; |
| } |
| static DEVICE_ATTR_RW(ls_level); |
| |
| static int pega_int_read(struct asus_laptop *asus, int arg, int *result) |
| { |
| struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; |
| int err = write_acpi_int_ret(asus->handle, METHOD_PEGA_READ, arg, |
| &buffer); |
| if (!err) { |
| union acpi_object *obj = buffer.pointer; |
| if (obj && obj->type == ACPI_TYPE_INTEGER) |
| *result = obj->integer.value; |
| else |
| err = -EIO; |
| } |
| return err; |
| } |
| |
| static ssize_t ls_value_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct asus_laptop *asus = dev_get_drvdata(dev); |
| int err, hi, lo; |
| |
| err = pega_int_read(asus, PEGA_READ_ALS_H, &hi); |
| if (!err) |
| err = pega_int_read(asus, PEGA_READ_ALS_L, &lo); |
| if (!err) |
| return sprintf(buf, "%d\n", 10 * hi + lo); |
| return err; |
| } |
| static DEVICE_ATTR_RO(ls_value); |
| |
| /* |
| * GPS |
| */ |
| static int asus_gps_status(struct asus_laptop *asus) |
| { |
| unsigned long long status; |
| acpi_status rv; |
| |
| rv = acpi_evaluate_integer(asus->handle, METHOD_GPS_STATUS, |
| NULL, &status); |
| if (ACPI_FAILURE(rv)) { |
| pr_warn("Error reading GPS status\n"); |
| return -ENODEV; |
| } |
| return !!status; |
| } |
| |
| static int asus_gps_switch(struct asus_laptop *asus, int status) |
| { |
| const char *meth = status ? METHOD_GPS_ON : METHOD_GPS_OFF; |
| |
| if (write_acpi_int(asus->handle, meth, 0x02)) |
| return -ENODEV; |
| return 0; |
| } |
| |
| static ssize_t gps_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct asus_laptop *asus = dev_get_drvdata(dev); |
| |
| return sprintf(buf, "%d\n", asus_gps_status(asus)); |
| } |
| |
| static ssize_t gps_store(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct asus_laptop *asus = dev_get_drvdata(dev); |
| int rv, value; |
| int ret; |
| |
| rv = kstrtoint(buf, 0, &value); |
| if (rv < 0) |
| return rv; |
| ret = asus_gps_switch(asus, !!value); |
| if (ret) |
| return ret; |
| rfkill_set_sw_state(asus->gps.rfkill, !value); |
| return count; |
| } |
| static DEVICE_ATTR_RW(gps); |
| |
| /* |
| * rfkill |
| */ |
| static int asus_gps_rfkill_set(void *data, bool blocked) |
| { |
| struct asus_laptop *asus = data; |
| |
| return asus_gps_switch(asus, !blocked); |
| } |
| |
| static const struct rfkill_ops asus_gps_rfkill_ops = { |
| .set_block = asus_gps_rfkill_set, |
| }; |
| |
| static int asus_rfkill_set(void *data, bool blocked) |
| { |
| struct asus_rfkill *rfk = data; |
| struct asus_laptop *asus = rfk->asus; |
| |
| if (rfk->control_id == WL_RSTS) |
| return asus_wlan_set(asus, !blocked); |
| else if (rfk->control_id == BT_RSTS) |
| return asus_bluetooth_set(asus, !blocked); |
| else if (rfk->control_id == WM_RSTS) |
| return asus_wimax_set(asus, !blocked); |
| else if (rfk->control_id == WW_RSTS) |
| return asus_wwan_set(asus, !blocked); |
| |
| return -EINVAL; |
| } |
| |
| static const struct rfkill_ops asus_rfkill_ops = { |
| .set_block = asus_rfkill_set, |
| }; |
| |
| static void asus_rfkill_terminate(struct asus_rfkill *rfk) |
| { |
| if (!rfk->rfkill) |
| return ; |
| |
| rfkill_unregister(rfk->rfkill); |
| rfkill_destroy(rfk->rfkill); |
| rfk->rfkill = NULL; |
| } |
| |
| static void asus_rfkill_exit(struct asus_laptop *asus) |
| { |
| asus_rfkill_terminate(&asus->wwan); |
| asus_rfkill_terminate(&asus->bluetooth); |
| asus_rfkill_terminate(&asus->wlan); |
| asus_rfkill_terminate(&asus->gps); |
| } |
| |
| static int asus_rfkill_setup(struct asus_laptop *asus, struct asus_rfkill *rfk, |
| const char *name, int control_id, int type, |
| const struct rfkill_ops *ops) |
| { |
| int result; |
| |
| rfk->control_id = control_id; |
| rfk->asus = asus; |
| rfk->rfkill = rfkill_alloc(name, &asus->platform_device->dev, |
| type, ops, rfk); |
| if (!rfk->rfkill) |
| return -EINVAL; |
| |
| result = rfkill_register(rfk->rfkill); |
| if (result) { |
| rfkill_destroy(rfk->rfkill); |
| rfk->rfkill = NULL; |
| } |
| |
| return result; |
| } |
| |
| static int asus_rfkill_init(struct asus_laptop *asus) |
| { |
| int result = 0; |
| |
| if (asus->is_pega_lucid) |
| return -ENODEV; |
| |
| if (!acpi_check_handle(asus->handle, METHOD_GPS_ON, NULL) && |
| !acpi_check_handle(asus->handle, METHOD_GPS_OFF, NULL) && |
| !acpi_check_handle(asus->handle, METHOD_GPS_STATUS, NULL)) |
| result = asus_rfkill_setup(asus, &asus->gps, "asus-gps", |
| -1, RFKILL_TYPE_GPS, |
| &asus_gps_rfkill_ops); |
| if (result) |
| goto exit; |
| |
| |
| if (!acpi_check_handle(asus->handle, METHOD_WLAN, NULL) && |
| asus->wled_type == TYPE_RFKILL) |
| result = asus_rfkill_setup(asus, &asus->wlan, "asus-wlan", |
| WL_RSTS, RFKILL_TYPE_WLAN, |
| &asus_rfkill_ops); |
| if (result) |
| goto exit; |
| |
| if (!acpi_check_handle(asus->handle, METHOD_BLUETOOTH, NULL) && |
| asus->bled_type == TYPE_RFKILL) |
| result = asus_rfkill_setup(asus, &asus->bluetooth, |
| "asus-bluetooth", BT_RSTS, |
| RFKILL_TYPE_BLUETOOTH, |
| &asus_rfkill_ops); |
| if (result) |
| goto exit; |
| |
| if (!acpi_check_handle(asus->handle, METHOD_WWAN, NULL)) |
| result = asus_rfkill_setup(asus, &asus->wwan, "asus-wwan", |
| WW_RSTS, RFKILL_TYPE_WWAN, |
| &asus_rfkill_ops); |
| if (result) |
| goto exit; |
| |
| if (!acpi_check_handle(asus->handle, METHOD_WIMAX, NULL)) |
| result = asus_rfkill_setup(asus, &asus->wimax, "asus-wimax", |
| WM_RSTS, RFKILL_TYPE_WIMAX, |
| &asus_rfkill_ops); |
| if (result) |
| goto exit; |
| |
| exit: |
| if (result) |
| asus_rfkill_exit(asus); |
| |
| return result; |
| } |
| |
| static int pega_rfkill_set(void *data, bool blocked) |
| { |
| struct asus_rfkill *rfk = data; |
| |
| int ret = asus_pega_lucid_set(rfk->asus, rfk->control_id, !blocked); |
| return ret; |
| } |
| |
| static const struct rfkill_ops pega_rfkill_ops = { |
| .set_block = pega_rfkill_set, |
| }; |
| |
| static int pega_rfkill_setup(struct asus_laptop *asus, struct asus_rfkill *rfk, |
| const char *name, int controlid, int rfkill_type) |
| { |
| return asus_rfkill_setup(asus, rfk, name, controlid, rfkill_type, |
| &pega_rfkill_ops); |
| } |
| |
| static int pega_rfkill_init(struct asus_laptop *asus) |
| { |
| int ret = 0; |
| |
| if(!asus->is_pega_lucid) |
| return -ENODEV; |
| |
| ret = pega_rfkill_setup(asus, &asus->wlan, "pega-wlan", |
| PEGA_WLAN, RFKILL_TYPE_WLAN); |
| if(ret) |
| goto exit; |
| |
| ret = pega_rfkill_setup(asus, &asus->bluetooth, "pega-bt", |
| PEGA_BLUETOOTH, RFKILL_TYPE_BLUETOOTH); |
| if(ret) |
| goto exit; |
| |
| ret = pega_rfkill_setup(asus, &asus->wwan, "pega-wwan", |
| PEGA_WWAN, RFKILL_TYPE_WWAN); |
| |
| exit: |
| if (ret) |
| asus_rfkill_exit(asus); |
| |
| return ret; |
| } |
| |
| /* |
| * Input device (i.e. hotkeys) |
| */ |
| static void asus_input_notify(struct asus_laptop *asus, int event) |
| { |
| if (!asus->inputdev) |
| return ; |
| if (!sparse_keymap_report_event(asus->inputdev, event, 1, true)) |
| pr_info("Unknown key %x pressed\n", event); |
| } |
| |
| static int asus_input_init(struct asus_laptop *asus) |
| { |
| struct input_dev *input; |
| int error; |
| |
| input = input_allocate_device(); |
| if (!input) |
| return -ENOMEM; |
| |
| input->name = "Asus Laptop extra buttons"; |
| input->phys = ASUS_LAPTOP_FILE "/input0"; |
| input->id.bustype = BUS_HOST; |
| input->dev.parent = &asus->platform_device->dev; |
| |
| error = sparse_keymap_setup(input, asus_keymap, NULL); |
| if (error) { |
| pr_err("Unable to setup input device keymap\n"); |
| goto err_free_dev; |
| } |
| error = input_register_device(input); |
| if (error) { |
| pr_warn("Unable to register input device\n"); |
| goto err_free_dev; |
| } |
| |
| asus->inputdev = input; |
| return 0; |
| |
| err_free_dev: |
| input_free_device(input); |
| return error; |
| } |
| |
| static void asus_input_exit(struct asus_laptop *asus) |
| { |
| if (asus->inputdev) |
| input_unregister_device(asus->inputdev); |
| asus->inputdev = NULL; |
| } |
| |
| /* |
| * ACPI driver |
| */ |
| static void asus_acpi_notify(struct acpi_device *device, u32 event) |
| { |
| struct asus_laptop *asus = acpi_driver_data(device); |
| u16 count; |
| |
| /* TODO Find a better way to handle events count. */ |
| count = asus->event_count[event % 128]++; |
| acpi_bus_generate_netlink_event(asus->device->pnp.device_class, |
| dev_name(&asus->device->dev), event, |
| count); |
| |
| if (event >= ATKD_BRNUP_MIN && event <= ATKD_BRNUP_MAX) |
| event = ATKD_BRNUP; |
| else if (event >= ATKD_BRNDOWN_MIN && |
| event <= ATKD_BRNDOWN_MAX) |
| event = ATKD_BRNDOWN; |
| |
| /* Brightness events are special */ |
| if (event == ATKD_BRNDOWN || event == ATKD_BRNUP) { |
| if (asus->backlight_device != NULL) { |
| /* Update the backlight device. */ |
| asus_backlight_notify(asus); |
| return ; |
| } |
| } |
| |
| /* Accelerometer "coarse orientation change" event */ |
| if (asus->pega_accel_poll && event == 0xEA) { |
| kobject_uevent(&asus->pega_accel_poll->dev.kobj, KOBJ_CHANGE); |
| return ; |
| } |
| |
| asus_input_notify(asus, event); |
| } |
| |
| static struct attribute *asus_attributes[] = { |
| &dev_attr_infos.attr, |
| &dev_attr_wlan.attr, |
| &dev_attr_bluetooth.attr, |
| &dev_attr_wimax.attr, |
| &dev_attr_wwan.attr, |
| &dev_attr_display.attr, |
| &dev_attr_ledd.attr, |
| &dev_attr_ls_value.attr, |
| &dev_attr_ls_level.attr, |
| &dev_attr_ls_switch.attr, |
| &dev_attr_gps.attr, |
| NULL |
| }; |
| |
| static umode_t asus_sysfs_is_visible(struct kobject *kobj, |
| struct attribute *attr, |
| int idx) |
| { |
| struct device *dev = kobj_to_dev(kobj); |
| struct asus_laptop *asus = dev_get_drvdata(dev); |
| acpi_handle handle = asus->handle; |
| bool supported; |
| |
| if (asus->is_pega_lucid) { |
| /* no ls_level interface on the Lucid */ |
| if (attr == &dev_attr_ls_switch.attr) |
| supported = true; |
| else if (attr == &dev_attr_ls_level.attr) |
| supported = false; |
| else |
| goto normal; |
| |
| return supported ? attr->mode : 0; |
| } |
| |
| normal: |
| if (attr == &dev_attr_wlan.attr) { |
| supported = !acpi_check_handle(handle, METHOD_WLAN, NULL); |
| |
| } else if (attr == &dev_attr_bluetooth.attr) { |
| supported = !acpi_check_handle(handle, METHOD_BLUETOOTH, NULL); |
| |
| } else if (attr == &dev_attr_display.attr) { |
| supported = !acpi_check_handle(handle, METHOD_SWITCH_DISPLAY, NULL); |
| |
| } else if (attr == &dev_attr_wimax.attr) { |
| supported = |
| !acpi_check_handle(asus->handle, METHOD_WIMAX, NULL); |
| |
| } else if (attr == &dev_attr_wwan.attr) { |
| supported = !acpi_check_handle(asus->handle, METHOD_WWAN, NULL); |
| |
| } else if (attr == &dev_attr_ledd.attr) { |
| supported = !acpi_check_handle(handle, METHOD_LEDD, NULL); |
| |
| } else if (attr == &dev_attr_ls_switch.attr || |
| attr == &dev_attr_ls_level.attr) { |
| supported = !acpi_check_handle(handle, METHOD_ALS_CONTROL, NULL) && |
| !acpi_check_handle(handle, METHOD_ALS_LEVEL, NULL); |
| } else if (attr == &dev_attr_ls_value.attr) { |
| supported = asus->is_pega_lucid; |
| } else if (attr == &dev_attr_gps.attr) { |
| supported = !acpi_check_handle(handle, METHOD_GPS_ON, NULL) && |
| !acpi_check_handle(handle, METHOD_GPS_OFF, NULL) && |
| !acpi_check_handle(handle, METHOD_GPS_STATUS, NULL); |
| } else { |
| supported = true; |
| } |
| |
| return supported ? attr->mode : 0; |
| } |
| |
| |
| static const struct attribute_group asus_attr_group = { |
| .is_visible = asus_sysfs_is_visible, |
| .attrs = asus_attributes, |
| }; |
| |
| static int asus_platform_init(struct asus_laptop *asus) |
| { |
| int result; |
| |
| asus->platform_device = platform_device_alloc(ASUS_LAPTOP_FILE, PLATFORM_DEVID_NONE); |
| if (!asus->platform_device) |
| return -ENOMEM; |
| platform_set_drvdata(asus->platform_device, asus); |
| |
| result = platform_device_add(asus->platform_device); |
| if (result) |
| goto fail_platform_device; |
| |
| result = sysfs_create_group(&asus->platform_device->dev.kobj, |
| &asus_attr_group); |
| if (result) |
| goto fail_sysfs; |
| |
| return 0; |
| |
| fail_sysfs: |
| platform_device_del(asus->platform_device); |
| fail_platform_device: |
| platform_device_put(asus->platform_device); |
| return result; |
| } |
| |
| static void asus_platform_exit(struct asus_laptop *asus) |
| { |
| sysfs_remove_group(&asus->platform_device->dev.kobj, &asus_attr_group); |
| platform_device_unregister(asus->platform_device); |
| } |
| |
| static struct platform_driver platform_driver = { |
| .driver = { |
| .name = ASUS_LAPTOP_FILE, |
| }, |
| }; |
| |
| /* |
| * This function is used to initialize the context with right values. In this |
| * method, we can make all the detection we want, and modify the asus_laptop |
| * struct |
| */ |
| static int asus_laptop_get_info(struct asus_laptop *asus) |
| { |
| struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; |
| union acpi_object *model = NULL; |
| unsigned long long bsts_result; |
| char *string = NULL; |
| acpi_status status; |
| |
| /* |
| * Get DSDT headers early enough to allow for differentiating between |
| * models, but late enough to allow acpi_bus_register_driver() to fail |
| * before doing anything ACPI-specific. Should we encounter a machine, |
| * which needs special handling (i.e. its hotkey device has a different |
| * HID), this bit will be moved. |
| */ |
| status = acpi_get_table(ACPI_SIG_DSDT, 1, &asus->dsdt_info); |
| if (ACPI_FAILURE(status)) |
| pr_warn("Couldn't get the DSDT table header\n"); |
| |
| /* We have to write 0 on init this far for all ASUS models */ |
| if (write_acpi_int_ret(asus->handle, "INIT", 0, &buffer)) { |
| pr_err("Hotkey initialization failed\n"); |
| return -ENODEV; |
| } |
| |
| /* This needs to be called for some laptops to init properly */ |
| status = |
| acpi_evaluate_integer(asus->handle, "BSTS", NULL, &bsts_result); |
| if (ACPI_FAILURE(status)) |
| pr_warn("Error calling BSTS\n"); |
| else if (bsts_result) |
| pr_notice("BSTS called, 0x%02x returned\n", |
| (uint) bsts_result); |
| |
| /* This too ... */ |
| if (write_acpi_int(asus->handle, "CWAP", wapf)) |
| pr_err("Error calling CWAP(%d)\n", wapf); |
| /* |
| * Try to match the object returned by INIT to the specific model. |
| * Handle every possible object (or the lack of thereof) the DSDT |
| * writers might throw at us. When in trouble, we pass NULL to |
| * asus_model_match() and try something completely different. |
| */ |
| if (buffer.pointer) { |
| model = buffer.pointer; |
| switch (model->type) { |
| case ACPI_TYPE_STRING: |
| string = model->string.pointer; |
| break; |
| case ACPI_TYPE_BUFFER: |
| string = model->buffer.pointer; |
| break; |
| default: |
| string = ""; |
| break; |
| } |
| } |
| asus->name = kstrdup(string, GFP_KERNEL); |
| if (!asus->name) { |
| kfree(buffer.pointer); |
| return -ENOMEM; |
| } |
| |
| if (string) |
| pr_notice(" %s model detected\n", string); |
| |
| if (!acpi_check_handle(asus->handle, METHOD_WL_STATUS, NULL)) |
| asus->have_rsts = true; |
| |
| kfree(model); |
| |
| return AE_OK; |
| } |
| |
| static int asus_acpi_init(struct asus_laptop *asus) |
| { |
| int result = 0; |
| |
| result = acpi_bus_get_status(asus->device); |
| if (result) |
| return result; |
| if (!asus->device->status.present) { |
| pr_err("Hotkey device not present, aborting\n"); |
| return -ENODEV; |
| } |
| |
| result = asus_laptop_get_info(asus); |
| if (result) |
| return result; |
| |
| if (!strcmp(bled_type, "led")) |
| asus->bled_type = TYPE_LED; |
| else if (!strcmp(bled_type, "rfkill")) |
| asus->bled_type = TYPE_RFKILL; |
| |
| if (!strcmp(wled_type, "led")) |
| asus->wled_type = TYPE_LED; |
| else if (!strcmp(wled_type, "rfkill")) |
| asus->wled_type = TYPE_RFKILL; |
| |
| if (bluetooth_status >= 0) |
| asus_bluetooth_set(asus, !!bluetooth_status); |
| |
| if (wlan_status >= 0) |
| asus_wlan_set(asus, !!wlan_status); |
| |
| if (wimax_status >= 0) |
| asus_wimax_set(asus, !!wimax_status); |
| |
| if (wwan_status >= 0) |
| asus_wwan_set(asus, !!wwan_status); |
| |
| /* Keyboard Backlight is on by default */ |
| if (!acpi_check_handle(asus->handle, METHOD_KBD_LIGHT_SET, NULL)) |
| asus_kled_set(asus, 1); |
| |
| /* LED display is off by default */ |
| asus->ledd_status = 0xFFF; |
| |
| /* Set initial values of light sensor and level */ |
| asus->light_switch = !!als_status; |
| asus->light_level = 5; /* level 5 for sensor sensitivity */ |
| |
| if (asus->is_pega_lucid) { |
| asus_als_switch(asus, asus->light_switch); |
| } else if (!acpi_check_handle(asus->handle, METHOD_ALS_CONTROL, NULL) && |
| !acpi_check_handle(asus->handle, METHOD_ALS_LEVEL, NULL)) { |
| asus_als_switch(asus, asus->light_switch); |
| asus_als_level(asus, asus->light_level); |
| } |
| |
| return result; |
| } |
| |
| static void asus_dmi_check(void) |
| { |
| const char *model; |
| |
| model = dmi_get_system_info(DMI_PRODUCT_NAME); |
| if (!model) |
| return; |
| |
| /* On L1400B WLED control the sound card, don't mess with it ... */ |
| if (strncmp(model, "L1400B", 6) == 0) { |
| wlan_status = -1; |
| } |
| } |
| |
| static bool asus_device_present; |
| |
| static int asus_acpi_add(struct acpi_device *device) |
| { |
| struct asus_laptop *asus; |
| int result; |
| |
| pr_notice("Asus Laptop Support version %s\n", |
| ASUS_LAPTOP_VERSION); |
| asus = kzalloc(sizeof(struct asus_laptop), GFP_KERNEL); |
| if (!asus) |
| return -ENOMEM; |
| asus->handle = device->handle; |
| strcpy(acpi_device_name(device), ASUS_LAPTOP_DEVICE_NAME); |
| strcpy(acpi_device_class(device), ASUS_LAPTOP_CLASS); |
| device->driver_data = asus; |
| asus->device = device; |
| |
| asus_dmi_check(); |
| |
| result = asus_acpi_init(asus); |
| if (result) |
| goto fail_platform; |
| |
| /* |
| * Need platform type detection first, then the platform |
| * device. It is used as a parent for the sub-devices below. |
| */ |
| asus->is_pega_lucid = asus_check_pega_lucid(asus); |
| result = asus_platform_init(asus); |
| if (result) |
| goto fail_platform; |
| |
| if (acpi_video_get_backlight_type() == acpi_backlight_vendor) { |
| result = asus_backlight_init(asus); |
| if (result) |
| goto fail_backlight; |
| } |
| |
| result = asus_input_init(asus); |
| if (result) |
| goto fail_input; |
| |
| result = asus_led_init(asus); |
| if (result) |
| goto fail_led; |
| |
| result = asus_rfkill_init(asus); |
| if (result && result != -ENODEV) |
| goto fail_rfkill; |
| |
| result = pega_accel_init(asus); |
| if (result && result != -ENODEV) |
| goto fail_pega_accel; |
| |
| result = pega_rfkill_init(asus); |
| if (result && result != -ENODEV) |
| goto fail_pega_rfkill; |
| |
| asus_device_present = true; |
| return 0; |
| |
| fail_pega_rfkill: |
| pega_accel_exit(asus); |
| fail_pega_accel: |
| asus_rfkill_exit(asus); |
| fail_rfkill: |
| asus_led_exit(asus); |
| fail_led: |
| asus_input_exit(asus); |
| fail_input: |
| asus_backlight_exit(asus); |
| fail_backlight: |
| asus_platform_exit(asus); |
| fail_platform: |
| kfree(asus); |
| |
| return result; |
| } |
| |
| static int asus_acpi_remove(struct acpi_device *device) |
| { |
| struct asus_laptop *asus = acpi_driver_data(device); |
| |
| asus_backlight_exit(asus); |
| asus_rfkill_exit(asus); |
| asus_led_exit(asus); |
| asus_input_exit(asus); |
| pega_accel_exit(asus); |
| asus_platform_exit(asus); |
| |
| kfree(asus->name); |
| kfree(asus); |
| return 0; |
| } |
| |
| static const struct acpi_device_id asus_device_ids[] = { |
| {"ATK0100", 0}, |
| {"ATK0101", 0}, |
| {"", 0}, |
| }; |
| MODULE_DEVICE_TABLE(acpi, asus_device_ids); |
| |
| static struct acpi_driver asus_acpi_driver = { |
| .name = ASUS_LAPTOP_NAME, |
| .class = ASUS_LAPTOP_CLASS, |
| .owner = THIS_MODULE, |
| .ids = asus_device_ids, |
| .flags = ACPI_DRIVER_ALL_NOTIFY_EVENTS, |
| .ops = { |
| .add = asus_acpi_add, |
| .remove = asus_acpi_remove, |
| .notify = asus_acpi_notify, |
| }, |
| }; |
| |
| static int __init asus_laptop_init(void) |
| { |
| int result; |
| |
| result = platform_driver_register(&platform_driver); |
| if (result < 0) |
| return result; |
| |
| result = acpi_bus_register_driver(&asus_acpi_driver); |
| if (result < 0) |
| goto fail_acpi_driver; |
| if (!asus_device_present) { |
| result = -ENODEV; |
| goto fail_no_device; |
| } |
| return 0; |
| |
| fail_no_device: |
| acpi_bus_unregister_driver(&asus_acpi_driver); |
| fail_acpi_driver: |
| platform_driver_unregister(&platform_driver); |
| return result; |
| } |
| |
| static void __exit asus_laptop_exit(void) |
| { |
| acpi_bus_unregister_driver(&asus_acpi_driver); |
| platform_driver_unregister(&platform_driver); |
| } |
| |
| module_init(asus_laptop_init); |
| module_exit(asus_laptop_exit); |