| // SPDX-License-Identifier: GPL-2.0-or-later |
| /*-*-linux-c-*-*/ |
| |
| /* |
| Copyright (C) 2007,2008 Jonathan Woithe <jwoithe@just42.net> |
| Copyright (C) 2008 Peter Gruber <nokos@gmx.net> |
| Copyright (C) 2008 Tony Vroon <tony@linx.net> |
| Based on earlier work: |
| Copyright (C) 2003 Shane Spencer <shane@bogomip.com> |
| Adrian Yee <brewt-fujitsu@brewt.org> |
| |
| Templated from msi-laptop.c and thinkpad_acpi.c which is copyright |
| by its respective authors. |
| |
| */ |
| |
| /* |
| * fujitsu-laptop.c - Fujitsu laptop support, providing access to additional |
| * features made available on a range of Fujitsu laptops including the |
| * P2xxx/P5xxx/S6xxx/S7xxx series. |
| * |
| * This driver implements a vendor-specific backlight control interface for |
| * Fujitsu laptops and provides support for hotkeys present on certain Fujitsu |
| * laptops. |
| * |
| * This driver has been tested on a Fujitsu Lifebook S6410, S7020 and |
| * P8010. It should work on most P-series and S-series Lifebooks, but |
| * YMMV. |
| * |
| * The module parameter use_alt_lcd_levels switches between different ACPI |
| * brightness controls which are used by different Fujitsu laptops. In most |
| * cases the correct method is automatically detected. "use_alt_lcd_levels=1" |
| * is applicable for a Fujitsu Lifebook S6410 if autodetection fails. |
| * |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/acpi.h> |
| #include <linux/bitops.h> |
| #include <linux/dmi.h> |
| #include <linux/backlight.h> |
| #include <linux/fb.h> |
| #include <linux/input.h> |
| #include <linux/input/sparse-keymap.h> |
| #include <linux/kfifo.h> |
| #include <linux/leds.h> |
| #include <linux/platform_device.h> |
| #include <acpi/video.h> |
| |
| #define FUJITSU_DRIVER_VERSION "0.6.0" |
| |
| #define FUJITSU_LCD_N_LEVELS 8 |
| |
| #define ACPI_FUJITSU_CLASS "fujitsu" |
| #define ACPI_FUJITSU_BL_HID "FUJ02B1" |
| #define ACPI_FUJITSU_BL_DRIVER_NAME "Fujitsu laptop FUJ02B1 ACPI brightness driver" |
| #define ACPI_FUJITSU_BL_DEVICE_NAME "Fujitsu FUJ02B1" |
| #define ACPI_FUJITSU_LAPTOP_HID "FUJ02E3" |
| #define ACPI_FUJITSU_LAPTOP_DRIVER_NAME "Fujitsu laptop FUJ02E3 ACPI hotkeys driver" |
| #define ACPI_FUJITSU_LAPTOP_DEVICE_NAME "Fujitsu FUJ02E3" |
| |
| #define ACPI_FUJITSU_NOTIFY_CODE 0x80 |
| |
| /* FUNC interface - command values */ |
| #define FUNC_FLAGS BIT(12) |
| #define FUNC_LEDS (BIT(12) | BIT(0)) |
| #define FUNC_BUTTONS (BIT(12) | BIT(1)) |
| #define FUNC_BACKLIGHT (BIT(12) | BIT(2)) |
| |
| /* FUNC interface - responses */ |
| #define UNSUPPORTED_CMD 0x80000000 |
| |
| /* FUNC interface - status flags */ |
| #define FLAG_RFKILL BIT(5) |
| #define FLAG_LID BIT(8) |
| #define FLAG_DOCK BIT(9) |
| #define FLAG_TOUCHPAD_TOGGLE BIT(26) |
| #define FLAG_MICMUTE BIT(29) |
| #define FLAG_SOFTKEYS (FLAG_RFKILL | FLAG_TOUCHPAD_TOGGLE | FLAG_MICMUTE) |
| |
| /* FUNC interface - LED control */ |
| #define FUNC_LED_OFF BIT(0) |
| #define FUNC_LED_ON (BIT(0) | BIT(16) | BIT(17)) |
| #define LOGOLAMP_POWERON BIT(13) |
| #define LOGOLAMP_ALWAYS BIT(14) |
| #define KEYBOARD_LAMPS BIT(8) |
| #define RADIO_LED_ON BIT(5) |
| #define ECO_LED BIT(16) |
| #define ECO_LED_ON BIT(19) |
| |
| /* FUNC interface - backlight power control */ |
| #define BACKLIGHT_PARAM_POWER BIT(2) |
| #define BACKLIGHT_OFF (BIT(0) | BIT(1)) |
| #define BACKLIGHT_ON 0 |
| |
| /* Scancodes read from the GIRB register */ |
| #define KEY1_CODE 0x410 |
| #define KEY2_CODE 0x411 |
| #define KEY3_CODE 0x412 |
| #define KEY4_CODE 0x413 |
| #define KEY5_CODE 0x420 |
| |
| /* Hotkey ringbuffer limits */ |
| #define MAX_HOTKEY_RINGBUFFER_SIZE 100 |
| #define RINGBUFFERSIZE 40 |
| |
| /* Module parameters */ |
| static int use_alt_lcd_levels = -1; |
| static bool disable_brightness_adjust; |
| |
| /* Device controlling the backlight and associated keys */ |
| struct fujitsu_bl { |
| struct input_dev *input; |
| char phys[32]; |
| struct backlight_device *bl_device; |
| unsigned int max_brightness; |
| unsigned int brightness_level; |
| }; |
| |
| static struct fujitsu_bl *fujitsu_bl; |
| |
| /* Device used to access hotkeys and other features on the laptop */ |
| struct fujitsu_laptop { |
| struct input_dev *input; |
| char phys[32]; |
| struct platform_device *pf_device; |
| struct kfifo fifo; |
| spinlock_t fifo_lock; |
| int flags_supported; |
| int flags_state; |
| }; |
| |
| static struct acpi_device *fext; |
| |
| /* Fujitsu ACPI interface function */ |
| |
| static int call_fext_func(struct acpi_device *device, |
| int func, int op, int feature, int state) |
| { |
| union acpi_object params[4] = { |
| { .integer.type = ACPI_TYPE_INTEGER, .integer.value = func }, |
| { .integer.type = ACPI_TYPE_INTEGER, .integer.value = op }, |
| { .integer.type = ACPI_TYPE_INTEGER, .integer.value = feature }, |
| { .integer.type = ACPI_TYPE_INTEGER, .integer.value = state } |
| }; |
| struct acpi_object_list arg_list = { 4, params }; |
| unsigned long long value; |
| acpi_status status; |
| |
| status = acpi_evaluate_integer(device->handle, "FUNC", &arg_list, |
| &value); |
| if (ACPI_FAILURE(status)) { |
| acpi_handle_err(device->handle, "Failed to evaluate FUNC\n"); |
| return -ENODEV; |
| } |
| |
| acpi_handle_debug(device->handle, |
| "FUNC 0x%x (args 0x%x, 0x%x, 0x%x) returned 0x%x\n", |
| func, op, feature, state, (int)value); |
| return value; |
| } |
| |
| /* Hardware access for LCD brightness control */ |
| |
| static int set_lcd_level(struct acpi_device *device, int level) |
| { |
| struct fujitsu_bl *priv = acpi_driver_data(device); |
| acpi_status status; |
| char *method; |
| |
| switch (use_alt_lcd_levels) { |
| case -1: |
| if (acpi_has_method(device->handle, "SBL2")) |
| method = "SBL2"; |
| else |
| method = "SBLL"; |
| break; |
| case 1: |
| method = "SBL2"; |
| break; |
| default: |
| method = "SBLL"; |
| break; |
| } |
| |
| acpi_handle_debug(device->handle, "set lcd level via %s [%d]\n", method, |
| level); |
| |
| if (level < 0 || level >= priv->max_brightness) |
| return -EINVAL; |
| |
| status = acpi_execute_simple_method(device->handle, method, level); |
| if (ACPI_FAILURE(status)) { |
| acpi_handle_err(device->handle, "Failed to evaluate %s\n", |
| method); |
| return -ENODEV; |
| } |
| |
| priv->brightness_level = level; |
| |
| return 0; |
| } |
| |
| static int get_lcd_level(struct acpi_device *device) |
| { |
| struct fujitsu_bl *priv = acpi_driver_data(device); |
| unsigned long long state = 0; |
| acpi_status status = AE_OK; |
| |
| acpi_handle_debug(device->handle, "get lcd level via GBLL\n"); |
| |
| status = acpi_evaluate_integer(device->handle, "GBLL", NULL, &state); |
| if (ACPI_FAILURE(status)) |
| return 0; |
| |
| priv->brightness_level = state & 0x0fffffff; |
| |
| return priv->brightness_level; |
| } |
| |
| static int get_max_brightness(struct acpi_device *device) |
| { |
| struct fujitsu_bl *priv = acpi_driver_data(device); |
| unsigned long long state = 0; |
| acpi_status status = AE_OK; |
| |
| acpi_handle_debug(device->handle, "get max lcd level via RBLL\n"); |
| |
| status = acpi_evaluate_integer(device->handle, "RBLL", NULL, &state); |
| if (ACPI_FAILURE(status)) |
| return -1; |
| |
| priv->max_brightness = state; |
| |
| return priv->max_brightness; |
| } |
| |
| /* Backlight device stuff */ |
| |
| static int bl_get_brightness(struct backlight_device *b) |
| { |
| struct acpi_device *device = bl_get_data(b); |
| |
| return b->props.power == FB_BLANK_POWERDOWN ? 0 : get_lcd_level(device); |
| } |
| |
| static int bl_update_status(struct backlight_device *b) |
| { |
| struct acpi_device *device = bl_get_data(b); |
| |
| if (fext) { |
| if (b->props.power == FB_BLANK_POWERDOWN) |
| call_fext_func(fext, FUNC_BACKLIGHT, 0x1, |
| BACKLIGHT_PARAM_POWER, BACKLIGHT_OFF); |
| else |
| call_fext_func(fext, FUNC_BACKLIGHT, 0x1, |
| BACKLIGHT_PARAM_POWER, BACKLIGHT_ON); |
| } |
| |
| return set_lcd_level(device, b->props.brightness); |
| } |
| |
| static const struct backlight_ops fujitsu_bl_ops = { |
| .get_brightness = bl_get_brightness, |
| .update_status = bl_update_status, |
| }; |
| |
| static ssize_t lid_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct fujitsu_laptop *priv = dev_get_drvdata(dev); |
| |
| if (!(priv->flags_supported & FLAG_LID)) |
| return sprintf(buf, "unknown\n"); |
| if (priv->flags_state & FLAG_LID) |
| return sprintf(buf, "open\n"); |
| else |
| return sprintf(buf, "closed\n"); |
| } |
| |
| static ssize_t dock_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct fujitsu_laptop *priv = dev_get_drvdata(dev); |
| |
| if (!(priv->flags_supported & FLAG_DOCK)) |
| return sprintf(buf, "unknown\n"); |
| if (priv->flags_state & FLAG_DOCK) |
| return sprintf(buf, "docked\n"); |
| else |
| return sprintf(buf, "undocked\n"); |
| } |
| |
| static ssize_t radios_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct fujitsu_laptop *priv = dev_get_drvdata(dev); |
| |
| if (!(priv->flags_supported & FLAG_RFKILL)) |
| return sprintf(buf, "unknown\n"); |
| if (priv->flags_state & FLAG_RFKILL) |
| return sprintf(buf, "on\n"); |
| else |
| return sprintf(buf, "killed\n"); |
| } |
| |
| static DEVICE_ATTR_RO(lid); |
| static DEVICE_ATTR_RO(dock); |
| static DEVICE_ATTR_RO(radios); |
| |
| static struct attribute *fujitsu_pf_attributes[] = { |
| &dev_attr_lid.attr, |
| &dev_attr_dock.attr, |
| &dev_attr_radios.attr, |
| NULL |
| }; |
| |
| static const struct attribute_group fujitsu_pf_attribute_group = { |
| .attrs = fujitsu_pf_attributes |
| }; |
| |
| static struct platform_driver fujitsu_pf_driver = { |
| .driver = { |
| .name = "fujitsu-laptop", |
| } |
| }; |
| |
| /* ACPI device for LCD brightness control */ |
| |
| static const struct key_entry keymap_backlight[] = { |
| { KE_KEY, true, { KEY_BRIGHTNESSUP } }, |
| { KE_KEY, false, { KEY_BRIGHTNESSDOWN } }, |
| { KE_END, 0 } |
| }; |
| |
| static int acpi_fujitsu_bl_input_setup(struct acpi_device *device) |
| { |
| struct fujitsu_bl *priv = acpi_driver_data(device); |
| int ret; |
| |
| priv->input = devm_input_allocate_device(&device->dev); |
| if (!priv->input) |
| return -ENOMEM; |
| |
| snprintf(priv->phys, sizeof(priv->phys), "%s/video/input0", |
| acpi_device_hid(device)); |
| |
| priv->input->name = acpi_device_name(device); |
| priv->input->phys = priv->phys; |
| priv->input->id.bustype = BUS_HOST; |
| priv->input->id.product = 0x06; |
| |
| ret = sparse_keymap_setup(priv->input, keymap_backlight, NULL); |
| if (ret) |
| return ret; |
| |
| return input_register_device(priv->input); |
| } |
| |
| static int fujitsu_backlight_register(struct acpi_device *device) |
| { |
| struct fujitsu_bl *priv = acpi_driver_data(device); |
| const struct backlight_properties props = { |
| .brightness = priv->brightness_level, |
| .max_brightness = priv->max_brightness - 1, |
| .type = BACKLIGHT_PLATFORM |
| }; |
| struct backlight_device *bd; |
| |
| bd = devm_backlight_device_register(&device->dev, "fujitsu-laptop", |
| &device->dev, device, |
| &fujitsu_bl_ops, &props); |
| if (IS_ERR(bd)) |
| return PTR_ERR(bd); |
| |
| priv->bl_device = bd; |
| |
| return 0; |
| } |
| |
| static int acpi_fujitsu_bl_add(struct acpi_device *device) |
| { |
| struct fujitsu_bl *priv; |
| int ret; |
| |
| if (acpi_video_get_backlight_type() != acpi_backlight_vendor) |
| return -ENODEV; |
| |
| priv = devm_kzalloc(&device->dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| fujitsu_bl = priv; |
| strcpy(acpi_device_name(device), ACPI_FUJITSU_BL_DEVICE_NAME); |
| strcpy(acpi_device_class(device), ACPI_FUJITSU_CLASS); |
| device->driver_data = priv; |
| |
| pr_info("ACPI: %s [%s]\n", |
| acpi_device_name(device), acpi_device_bid(device)); |
| |
| if (get_max_brightness(device) <= 0) |
| priv->max_brightness = FUJITSU_LCD_N_LEVELS; |
| get_lcd_level(device); |
| |
| ret = acpi_fujitsu_bl_input_setup(device); |
| if (ret) |
| return ret; |
| |
| return fujitsu_backlight_register(device); |
| } |
| |
| /* Brightness notify */ |
| |
| static void acpi_fujitsu_bl_notify(struct acpi_device *device, u32 event) |
| { |
| struct fujitsu_bl *priv = acpi_driver_data(device); |
| int oldb, newb; |
| |
| if (event != ACPI_FUJITSU_NOTIFY_CODE) { |
| acpi_handle_info(device->handle, "unsupported event [0x%x]\n", |
| event); |
| sparse_keymap_report_event(priv->input, -1, 1, true); |
| return; |
| } |
| |
| oldb = priv->brightness_level; |
| get_lcd_level(device); |
| newb = priv->brightness_level; |
| |
| acpi_handle_debug(device->handle, |
| "brightness button event [%i -> %i]\n", oldb, newb); |
| |
| if (oldb == newb) |
| return; |
| |
| if (!disable_brightness_adjust) |
| set_lcd_level(device, newb); |
| |
| sparse_keymap_report_event(priv->input, oldb < newb, 1, true); |
| } |
| |
| /* ACPI device for hotkey handling */ |
| |
| static const struct key_entry keymap_default[] = { |
| { KE_KEY, KEY1_CODE, { KEY_PROG1 } }, |
| { KE_KEY, KEY2_CODE, { KEY_PROG2 } }, |
| { KE_KEY, KEY3_CODE, { KEY_PROG3 } }, |
| { KE_KEY, KEY4_CODE, { KEY_PROG4 } }, |
| { KE_KEY, KEY5_CODE, { KEY_RFKILL } }, |
| /* Soft keys read from status flags */ |
| { KE_KEY, FLAG_RFKILL, { KEY_RFKILL } }, |
| { KE_KEY, FLAG_TOUCHPAD_TOGGLE, { KEY_TOUCHPAD_TOGGLE } }, |
| { KE_KEY, FLAG_MICMUTE, { KEY_MICMUTE } }, |
| { KE_END, 0 } |
| }; |
| |
| static const struct key_entry keymap_s64x0[] = { |
| { KE_KEY, KEY1_CODE, { KEY_SCREENLOCK } }, /* "Lock" */ |
| { KE_KEY, KEY2_CODE, { KEY_HELP } }, /* "Mobility Center */ |
| { KE_KEY, KEY3_CODE, { KEY_PROG3 } }, |
| { KE_KEY, KEY4_CODE, { KEY_PROG4 } }, |
| { KE_END, 0 } |
| }; |
| |
| static const struct key_entry keymap_p8010[] = { |
| { KE_KEY, KEY1_CODE, { KEY_HELP } }, /* "Support" */ |
| { KE_KEY, KEY2_CODE, { KEY_PROG2 } }, |
| { KE_KEY, KEY3_CODE, { KEY_SWITCHVIDEOMODE } }, /* "Presentation" */ |
| { KE_KEY, KEY4_CODE, { KEY_WWW } }, /* "WWW" */ |
| { KE_END, 0 } |
| }; |
| |
| static const struct key_entry *keymap = keymap_default; |
| |
| static int fujitsu_laptop_dmi_keymap_override(const struct dmi_system_id *id) |
| { |
| pr_info("Identified laptop model '%s'\n", id->ident); |
| keymap = id->driver_data; |
| return 1; |
| } |
| |
| static const struct dmi_system_id fujitsu_laptop_dmi_table[] = { |
| { |
| .callback = fujitsu_laptop_dmi_keymap_override, |
| .ident = "Fujitsu Siemens S6410", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK S6410"), |
| }, |
| .driver_data = (void *)keymap_s64x0 |
| }, |
| { |
| .callback = fujitsu_laptop_dmi_keymap_override, |
| .ident = "Fujitsu Siemens S6420", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK S6420"), |
| }, |
| .driver_data = (void *)keymap_s64x0 |
| }, |
| { |
| .callback = fujitsu_laptop_dmi_keymap_override, |
| .ident = "Fujitsu LifeBook P8010", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook P8010"), |
| }, |
| .driver_data = (void *)keymap_p8010 |
| }, |
| {} |
| }; |
| |
| static int acpi_fujitsu_laptop_input_setup(struct acpi_device *device) |
| { |
| struct fujitsu_laptop *priv = acpi_driver_data(device); |
| int ret; |
| |
| priv->input = devm_input_allocate_device(&device->dev); |
| if (!priv->input) |
| return -ENOMEM; |
| |
| snprintf(priv->phys, sizeof(priv->phys), "%s/input0", |
| acpi_device_hid(device)); |
| |
| priv->input->name = acpi_device_name(device); |
| priv->input->phys = priv->phys; |
| priv->input->id.bustype = BUS_HOST; |
| |
| dmi_check_system(fujitsu_laptop_dmi_table); |
| ret = sparse_keymap_setup(priv->input, keymap, NULL); |
| if (ret) |
| return ret; |
| |
| return input_register_device(priv->input); |
| } |
| |
| static int fujitsu_laptop_platform_add(struct acpi_device *device) |
| { |
| struct fujitsu_laptop *priv = acpi_driver_data(device); |
| int ret; |
| |
| priv->pf_device = platform_device_alloc("fujitsu-laptop", PLATFORM_DEVID_NONE); |
| if (!priv->pf_device) |
| return -ENOMEM; |
| |
| platform_set_drvdata(priv->pf_device, priv); |
| |
| ret = platform_device_add(priv->pf_device); |
| if (ret) |
| goto err_put_platform_device; |
| |
| ret = sysfs_create_group(&priv->pf_device->dev.kobj, |
| &fujitsu_pf_attribute_group); |
| if (ret) |
| goto err_del_platform_device; |
| |
| return 0; |
| |
| err_del_platform_device: |
| platform_device_del(priv->pf_device); |
| err_put_platform_device: |
| platform_device_put(priv->pf_device); |
| |
| return ret; |
| } |
| |
| static void fujitsu_laptop_platform_remove(struct acpi_device *device) |
| { |
| struct fujitsu_laptop *priv = acpi_driver_data(device); |
| |
| sysfs_remove_group(&priv->pf_device->dev.kobj, |
| &fujitsu_pf_attribute_group); |
| platform_device_unregister(priv->pf_device); |
| } |
| |
| static int logolamp_set(struct led_classdev *cdev, |
| enum led_brightness brightness) |
| { |
| struct acpi_device *device = to_acpi_device(cdev->dev->parent); |
| int poweron = FUNC_LED_ON, always = FUNC_LED_ON; |
| int ret; |
| |
| if (brightness < LED_HALF) |
| poweron = FUNC_LED_OFF; |
| |
| if (brightness < LED_FULL) |
| always = FUNC_LED_OFF; |
| |
| ret = call_fext_func(device, FUNC_LEDS, 0x1, LOGOLAMP_POWERON, poweron); |
| if (ret < 0) |
| return ret; |
| |
| return call_fext_func(device, FUNC_LEDS, 0x1, LOGOLAMP_ALWAYS, always); |
| } |
| |
| static enum led_brightness logolamp_get(struct led_classdev *cdev) |
| { |
| struct acpi_device *device = to_acpi_device(cdev->dev->parent); |
| int ret; |
| |
| ret = call_fext_func(device, FUNC_LEDS, 0x2, LOGOLAMP_ALWAYS, 0x0); |
| if (ret == FUNC_LED_ON) |
| return LED_FULL; |
| |
| ret = call_fext_func(device, FUNC_LEDS, 0x2, LOGOLAMP_POWERON, 0x0); |
| if (ret == FUNC_LED_ON) |
| return LED_HALF; |
| |
| return LED_OFF; |
| } |
| |
| static int kblamps_set(struct led_classdev *cdev, |
| enum led_brightness brightness) |
| { |
| struct acpi_device *device = to_acpi_device(cdev->dev->parent); |
| |
| if (brightness >= LED_FULL) |
| return call_fext_func(device, FUNC_LEDS, 0x1, KEYBOARD_LAMPS, |
| FUNC_LED_ON); |
| else |
| return call_fext_func(device, FUNC_LEDS, 0x1, KEYBOARD_LAMPS, |
| FUNC_LED_OFF); |
| } |
| |
| static enum led_brightness kblamps_get(struct led_classdev *cdev) |
| { |
| struct acpi_device *device = to_acpi_device(cdev->dev->parent); |
| enum led_brightness brightness = LED_OFF; |
| |
| if (call_fext_func(device, |
| FUNC_LEDS, 0x2, KEYBOARD_LAMPS, 0x0) == FUNC_LED_ON) |
| brightness = LED_FULL; |
| |
| return brightness; |
| } |
| |
| static int radio_led_set(struct led_classdev *cdev, |
| enum led_brightness brightness) |
| { |
| struct acpi_device *device = to_acpi_device(cdev->dev->parent); |
| |
| if (brightness >= LED_FULL) |
| return call_fext_func(device, FUNC_FLAGS, 0x5, RADIO_LED_ON, |
| RADIO_LED_ON); |
| else |
| return call_fext_func(device, FUNC_FLAGS, 0x5, RADIO_LED_ON, |
| 0x0); |
| } |
| |
| static enum led_brightness radio_led_get(struct led_classdev *cdev) |
| { |
| struct acpi_device *device = to_acpi_device(cdev->dev->parent); |
| enum led_brightness brightness = LED_OFF; |
| |
| if (call_fext_func(device, FUNC_FLAGS, 0x4, 0x0, 0x0) & RADIO_LED_ON) |
| brightness = LED_FULL; |
| |
| return brightness; |
| } |
| |
| static int eco_led_set(struct led_classdev *cdev, |
| enum led_brightness brightness) |
| { |
| struct acpi_device *device = to_acpi_device(cdev->dev->parent); |
| int curr; |
| |
| curr = call_fext_func(device, FUNC_LEDS, 0x2, ECO_LED, 0x0); |
| if (brightness >= LED_FULL) |
| return call_fext_func(device, FUNC_LEDS, 0x1, ECO_LED, |
| curr | ECO_LED_ON); |
| else |
| return call_fext_func(device, FUNC_LEDS, 0x1, ECO_LED, |
| curr & ~ECO_LED_ON); |
| } |
| |
| static enum led_brightness eco_led_get(struct led_classdev *cdev) |
| { |
| struct acpi_device *device = to_acpi_device(cdev->dev->parent); |
| enum led_brightness brightness = LED_OFF; |
| |
| if (call_fext_func(device, FUNC_LEDS, 0x2, ECO_LED, 0x0) & ECO_LED_ON) |
| brightness = LED_FULL; |
| |
| return brightness; |
| } |
| |
| static int acpi_fujitsu_laptop_leds_register(struct acpi_device *device) |
| { |
| struct fujitsu_laptop *priv = acpi_driver_data(device); |
| struct led_classdev *led; |
| int ret; |
| |
| if (call_fext_func(device, |
| FUNC_LEDS, 0x0, 0x0, 0x0) & LOGOLAMP_POWERON) { |
| led = devm_kzalloc(&device->dev, sizeof(*led), GFP_KERNEL); |
| if (!led) |
| return -ENOMEM; |
| |
| led->name = "fujitsu::logolamp"; |
| led->brightness_set_blocking = logolamp_set; |
| led->brightness_get = logolamp_get; |
| ret = devm_led_classdev_register(&device->dev, led); |
| if (ret) |
| return ret; |
| } |
| |
| if ((call_fext_func(device, |
| FUNC_LEDS, 0x0, 0x0, 0x0) & KEYBOARD_LAMPS) && |
| (call_fext_func(device, FUNC_BUTTONS, 0x0, 0x0, 0x0) == 0x0)) { |
| led = devm_kzalloc(&device->dev, sizeof(*led), GFP_KERNEL); |
| if (!led) |
| return -ENOMEM; |
| |
| led->name = "fujitsu::kblamps"; |
| led->brightness_set_blocking = kblamps_set; |
| led->brightness_get = kblamps_get; |
| ret = devm_led_classdev_register(&device->dev, led); |
| if (ret) |
| return ret; |
| } |
| |
| /* |
| * Some Fujitsu laptops have a radio toggle button in place of a slide |
| * switch and all such machines appear to also have an RF LED. Based on |
| * comparing DSDT tables of four Fujitsu Lifebook models (E744, E751, |
| * S7110, S8420; the first one has a radio toggle button, the other |
| * three have slide switches), bit 17 of flags_supported (the value |
| * returned by method S000 of ACPI device FUJ02E3) seems to indicate |
| * whether given model has a radio toggle button. |
| */ |
| if (priv->flags_supported & BIT(17)) { |
| led = devm_kzalloc(&device->dev, sizeof(*led), GFP_KERNEL); |
| if (!led) |
| return -ENOMEM; |
| |
| led->name = "fujitsu::radio_led"; |
| led->brightness_set_blocking = radio_led_set; |
| led->brightness_get = radio_led_get; |
| led->default_trigger = "rfkill-any"; |
| ret = devm_led_classdev_register(&device->dev, led); |
| if (ret) |
| return ret; |
| } |
| |
| /* Support for eco led is not always signaled in bit corresponding |
| * to the bit used to control the led. According to the DSDT table, |
| * bit 14 seems to indicate presence of said led as well. |
| * Confirm by testing the status. |
| */ |
| if ((call_fext_func(device, FUNC_LEDS, 0x0, 0x0, 0x0) & BIT(14)) && |
| (call_fext_func(device, |
| FUNC_LEDS, 0x2, ECO_LED, 0x0) != UNSUPPORTED_CMD)) { |
| led = devm_kzalloc(&device->dev, sizeof(*led), GFP_KERNEL); |
| if (!led) |
| return -ENOMEM; |
| |
| led->name = "fujitsu::eco_led"; |
| led->brightness_set_blocking = eco_led_set; |
| led->brightness_get = eco_led_get; |
| ret = devm_led_classdev_register(&device->dev, led); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int acpi_fujitsu_laptop_add(struct acpi_device *device) |
| { |
| struct fujitsu_laptop *priv; |
| int ret, i = 0; |
| |
| priv = devm_kzalloc(&device->dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| WARN_ONCE(fext, "More than one FUJ02E3 ACPI device was found. Driver may not work as intended."); |
| fext = device; |
| |
| strcpy(acpi_device_name(device), ACPI_FUJITSU_LAPTOP_DEVICE_NAME); |
| strcpy(acpi_device_class(device), ACPI_FUJITSU_CLASS); |
| device->driver_data = priv; |
| |
| /* kfifo */ |
| spin_lock_init(&priv->fifo_lock); |
| ret = kfifo_alloc(&priv->fifo, RINGBUFFERSIZE * sizeof(int), |
| GFP_KERNEL); |
| if (ret) |
| return ret; |
| |
| pr_info("ACPI: %s [%s]\n", |
| acpi_device_name(device), acpi_device_bid(device)); |
| |
| while (call_fext_func(device, FUNC_BUTTONS, 0x1, 0x0, 0x0) != 0 && |
| i++ < MAX_HOTKEY_RINGBUFFER_SIZE) |
| ; /* No action, result is discarded */ |
| acpi_handle_debug(device->handle, "Discarded %i ringbuffer entries\n", |
| i); |
| |
| priv->flags_supported = call_fext_func(device, FUNC_FLAGS, 0x0, 0x0, |
| 0x0); |
| |
| /* Make sure our bitmask of supported functions is cleared if the |
| RFKILL function block is not implemented, like on the S7020. */ |
| if (priv->flags_supported == UNSUPPORTED_CMD) |
| priv->flags_supported = 0; |
| |
| if (priv->flags_supported) |
| priv->flags_state = call_fext_func(device, FUNC_FLAGS, 0x4, 0x0, |
| 0x0); |
| |
| /* Suspect this is a keymap of the application panel, print it */ |
| acpi_handle_info(device->handle, "BTNI: [0x%x]\n", |
| call_fext_func(device, FUNC_BUTTONS, 0x0, 0x0, 0x0)); |
| |
| /* Sync backlight power status */ |
| if (fujitsu_bl && fujitsu_bl->bl_device && |
| acpi_video_get_backlight_type() == acpi_backlight_vendor) { |
| if (call_fext_func(fext, FUNC_BACKLIGHT, 0x2, |
| BACKLIGHT_PARAM_POWER, 0x0) == BACKLIGHT_OFF) |
| fujitsu_bl->bl_device->props.power = FB_BLANK_POWERDOWN; |
| else |
| fujitsu_bl->bl_device->props.power = FB_BLANK_UNBLANK; |
| } |
| |
| ret = acpi_fujitsu_laptop_input_setup(device); |
| if (ret) |
| goto err_free_fifo; |
| |
| ret = acpi_fujitsu_laptop_leds_register(device); |
| if (ret) |
| goto err_free_fifo; |
| |
| ret = fujitsu_laptop_platform_add(device); |
| if (ret) |
| goto err_free_fifo; |
| |
| return 0; |
| |
| err_free_fifo: |
| kfifo_free(&priv->fifo); |
| |
| return ret; |
| } |
| |
| static int acpi_fujitsu_laptop_remove(struct acpi_device *device) |
| { |
| struct fujitsu_laptop *priv = acpi_driver_data(device); |
| |
| fujitsu_laptop_platform_remove(device); |
| |
| kfifo_free(&priv->fifo); |
| |
| return 0; |
| } |
| |
| static void acpi_fujitsu_laptop_press(struct acpi_device *device, int scancode) |
| { |
| struct fujitsu_laptop *priv = acpi_driver_data(device); |
| int ret; |
| |
| ret = kfifo_in_locked(&priv->fifo, (unsigned char *)&scancode, |
| sizeof(scancode), &priv->fifo_lock); |
| if (ret != sizeof(scancode)) { |
| dev_info(&priv->input->dev, "Could not push scancode [0x%x]\n", |
| scancode); |
| return; |
| } |
| sparse_keymap_report_event(priv->input, scancode, 1, false); |
| dev_dbg(&priv->input->dev, "Push scancode into ringbuffer [0x%x]\n", |
| scancode); |
| } |
| |
| static void acpi_fujitsu_laptop_release(struct acpi_device *device) |
| { |
| struct fujitsu_laptop *priv = acpi_driver_data(device); |
| int scancode, ret; |
| |
| while (true) { |
| ret = kfifo_out_locked(&priv->fifo, (unsigned char *)&scancode, |
| sizeof(scancode), &priv->fifo_lock); |
| if (ret != sizeof(scancode)) |
| return; |
| sparse_keymap_report_event(priv->input, scancode, 0, false); |
| dev_dbg(&priv->input->dev, |
| "Pop scancode from ringbuffer [0x%x]\n", scancode); |
| } |
| } |
| |
| static void acpi_fujitsu_laptop_notify(struct acpi_device *device, u32 event) |
| { |
| struct fujitsu_laptop *priv = acpi_driver_data(device); |
| unsigned long flags; |
| int scancode, i = 0; |
| unsigned int irb; |
| |
| if (event != ACPI_FUJITSU_NOTIFY_CODE) { |
| acpi_handle_info(device->handle, "Unsupported event [0x%x]\n", |
| event); |
| sparse_keymap_report_event(priv->input, -1, 1, true); |
| return; |
| } |
| |
| if (priv->flags_supported) |
| priv->flags_state = call_fext_func(device, FUNC_FLAGS, 0x4, 0x0, |
| 0x0); |
| |
| while ((irb = call_fext_func(device, |
| FUNC_BUTTONS, 0x1, 0x0, 0x0)) != 0 && |
| i++ < MAX_HOTKEY_RINGBUFFER_SIZE) { |
| scancode = irb & 0x4ff; |
| if (sparse_keymap_entry_from_scancode(priv->input, scancode)) |
| acpi_fujitsu_laptop_press(device, scancode); |
| else if (scancode == 0) |
| acpi_fujitsu_laptop_release(device); |
| else |
| acpi_handle_info(device->handle, |
| "Unknown GIRB result [%x]\n", irb); |
| } |
| |
| /* |
| * First seen on the Skylake-based Lifebook E736/E746/E756), the |
| * touchpad toggle hotkey (Fn+F4) is handled in software. Other models |
| * have since added additional "soft keys". These are reported in the |
| * status flags queried using FUNC_FLAGS. |
| */ |
| if (priv->flags_supported & (FLAG_SOFTKEYS)) { |
| flags = call_fext_func(device, FUNC_FLAGS, 0x1, 0x0, 0x0); |
| flags &= (FLAG_SOFTKEYS); |
| for_each_set_bit(i, &flags, BITS_PER_LONG) |
| sparse_keymap_report_event(priv->input, BIT(i), 1, true); |
| } |
| } |
| |
| /* Initialization */ |
| |
| static const struct acpi_device_id fujitsu_bl_device_ids[] = { |
| {ACPI_FUJITSU_BL_HID, 0}, |
| {"", 0}, |
| }; |
| |
| static struct acpi_driver acpi_fujitsu_bl_driver = { |
| .name = ACPI_FUJITSU_BL_DRIVER_NAME, |
| .class = ACPI_FUJITSU_CLASS, |
| .ids = fujitsu_bl_device_ids, |
| .ops = { |
| .add = acpi_fujitsu_bl_add, |
| .notify = acpi_fujitsu_bl_notify, |
| }, |
| }; |
| |
| static const struct acpi_device_id fujitsu_laptop_device_ids[] = { |
| {ACPI_FUJITSU_LAPTOP_HID, 0}, |
| {"", 0}, |
| }; |
| |
| static struct acpi_driver acpi_fujitsu_laptop_driver = { |
| .name = ACPI_FUJITSU_LAPTOP_DRIVER_NAME, |
| .class = ACPI_FUJITSU_CLASS, |
| .ids = fujitsu_laptop_device_ids, |
| .ops = { |
| .add = acpi_fujitsu_laptop_add, |
| .remove = acpi_fujitsu_laptop_remove, |
| .notify = acpi_fujitsu_laptop_notify, |
| }, |
| }; |
| |
| static const struct acpi_device_id fujitsu_ids[] __used = { |
| {ACPI_FUJITSU_BL_HID, 0}, |
| {ACPI_FUJITSU_LAPTOP_HID, 0}, |
| {"", 0} |
| }; |
| MODULE_DEVICE_TABLE(acpi, fujitsu_ids); |
| |
| static int __init fujitsu_init(void) |
| { |
| int ret; |
| |
| ret = acpi_bus_register_driver(&acpi_fujitsu_bl_driver); |
| if (ret) |
| return ret; |
| |
| /* Register platform stuff */ |
| |
| ret = platform_driver_register(&fujitsu_pf_driver); |
| if (ret) |
| goto err_unregister_acpi; |
| |
| /* Register laptop driver */ |
| |
| ret = acpi_bus_register_driver(&acpi_fujitsu_laptop_driver); |
| if (ret) |
| goto err_unregister_platform_driver; |
| |
| pr_info("driver " FUJITSU_DRIVER_VERSION " successfully loaded\n"); |
| |
| return 0; |
| |
| err_unregister_platform_driver: |
| platform_driver_unregister(&fujitsu_pf_driver); |
| err_unregister_acpi: |
| acpi_bus_unregister_driver(&acpi_fujitsu_bl_driver); |
| |
| return ret; |
| } |
| |
| static void __exit fujitsu_cleanup(void) |
| { |
| acpi_bus_unregister_driver(&acpi_fujitsu_laptop_driver); |
| |
| platform_driver_unregister(&fujitsu_pf_driver); |
| |
| acpi_bus_unregister_driver(&acpi_fujitsu_bl_driver); |
| |
| pr_info("driver unloaded\n"); |
| } |
| |
| module_init(fujitsu_init); |
| module_exit(fujitsu_cleanup); |
| |
| module_param(use_alt_lcd_levels, int, 0644); |
| MODULE_PARM_DESC(use_alt_lcd_levels, "Interface used for setting LCD brightness level (-1 = auto, 0 = force SBLL, 1 = force SBL2)"); |
| module_param(disable_brightness_adjust, bool, 0644); |
| MODULE_PARM_DESC(disable_brightness_adjust, "Disable LCD brightness adjustment"); |
| |
| MODULE_AUTHOR("Jonathan Woithe, Peter Gruber, Tony Vroon"); |
| MODULE_DESCRIPTION("Fujitsu laptop extras support"); |
| MODULE_VERSION(FUJITSU_DRIVER_VERSION); |
| MODULE_LICENSE("GPL"); |