| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * zfcp device driver |
| * |
| * Implementation of FSF commands. |
| * |
| * Copyright IBM Corp. 2002, 2020 |
| */ |
| |
| #define KMSG_COMPONENT "zfcp" |
| #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt |
| |
| #include <linux/blktrace_api.h> |
| #include <linux/jiffies.h> |
| #include <linux/types.h> |
| #include <linux/slab.h> |
| #include <scsi/fc/fc_els.h> |
| #include "zfcp_ext.h" |
| #include "zfcp_fc.h" |
| #include "zfcp_dbf.h" |
| #include "zfcp_qdio.h" |
| #include "zfcp_reqlist.h" |
| #include "zfcp_diag.h" |
| |
| /* timeout for FSF requests sent during scsi_eh: abort or FCP TMF */ |
| #define ZFCP_FSF_SCSI_ER_TIMEOUT (10*HZ) |
| /* timeout for: exchange config/port data outside ERP, or open/close WKA port */ |
| #define ZFCP_FSF_REQUEST_TIMEOUT (60*HZ) |
| |
| struct kmem_cache *zfcp_fsf_qtcb_cache; |
| |
| static bool ber_stop = true; |
| module_param(ber_stop, bool, 0600); |
| MODULE_PARM_DESC(ber_stop, |
| "Shuts down FCP devices for FCP channels that report a bit-error count in excess of its threshold (default on)"); |
| |
| static void zfcp_fsf_request_timeout_handler(struct timer_list *t) |
| { |
| struct zfcp_fsf_req *fsf_req = from_timer(fsf_req, t, timer); |
| struct zfcp_adapter *adapter = fsf_req->adapter; |
| |
| zfcp_qdio_siosl(adapter); |
| zfcp_erp_adapter_reopen(adapter, ZFCP_STATUS_COMMON_ERP_FAILED, |
| "fsrth_1"); |
| } |
| |
| static void zfcp_fsf_start_timer(struct zfcp_fsf_req *fsf_req, |
| unsigned long timeout) |
| { |
| fsf_req->timer.function = zfcp_fsf_request_timeout_handler; |
| fsf_req->timer.expires = jiffies + timeout; |
| add_timer(&fsf_req->timer); |
| } |
| |
| static void zfcp_fsf_start_erp_timer(struct zfcp_fsf_req *fsf_req) |
| { |
| BUG_ON(!fsf_req->erp_action); |
| fsf_req->timer.function = zfcp_erp_timeout_handler; |
| fsf_req->timer.expires = jiffies + 30 * HZ; |
| add_timer(&fsf_req->timer); |
| } |
| |
| /* association between FSF command and FSF QTCB type */ |
| static u32 fsf_qtcb_type[] = { |
| [FSF_QTCB_FCP_CMND] = FSF_IO_COMMAND, |
| [FSF_QTCB_ABORT_FCP_CMND] = FSF_SUPPORT_COMMAND, |
| [FSF_QTCB_OPEN_PORT_WITH_DID] = FSF_SUPPORT_COMMAND, |
| [FSF_QTCB_OPEN_LUN] = FSF_SUPPORT_COMMAND, |
| [FSF_QTCB_CLOSE_LUN] = FSF_SUPPORT_COMMAND, |
| [FSF_QTCB_CLOSE_PORT] = FSF_SUPPORT_COMMAND, |
| [FSF_QTCB_CLOSE_PHYSICAL_PORT] = FSF_SUPPORT_COMMAND, |
| [FSF_QTCB_SEND_ELS] = FSF_SUPPORT_COMMAND, |
| [FSF_QTCB_SEND_GENERIC] = FSF_SUPPORT_COMMAND, |
| [FSF_QTCB_EXCHANGE_CONFIG_DATA] = FSF_CONFIG_COMMAND, |
| [FSF_QTCB_EXCHANGE_PORT_DATA] = FSF_PORT_COMMAND, |
| [FSF_QTCB_DOWNLOAD_CONTROL_FILE] = FSF_SUPPORT_COMMAND, |
| [FSF_QTCB_UPLOAD_CONTROL_FILE] = FSF_SUPPORT_COMMAND |
| }; |
| |
| static void zfcp_fsf_class_not_supp(struct zfcp_fsf_req *req) |
| { |
| dev_err(&req->adapter->ccw_device->dev, "FCP device not " |
| "operational because of an unsupported FC class\n"); |
| zfcp_erp_adapter_shutdown(req->adapter, 0, "fscns_1"); |
| req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
| } |
| |
| /** |
| * zfcp_fsf_req_free - free memory used by fsf request |
| * @req: pointer to struct zfcp_fsf_req |
| */ |
| void zfcp_fsf_req_free(struct zfcp_fsf_req *req) |
| { |
| if (likely(req->pool)) { |
| if (likely(!zfcp_fsf_req_is_status_read_buffer(req))) |
| mempool_free(req->qtcb, req->adapter->pool.qtcb_pool); |
| mempool_free(req, req->pool); |
| return; |
| } |
| |
| if (likely(!zfcp_fsf_req_is_status_read_buffer(req))) |
| kmem_cache_free(zfcp_fsf_qtcb_cache, req->qtcb); |
| kfree(req); |
| } |
| |
| static void zfcp_fsf_status_read_port_closed(struct zfcp_fsf_req *req) |
| { |
| unsigned long flags; |
| struct fsf_status_read_buffer *sr_buf = req->data; |
| struct zfcp_adapter *adapter = req->adapter; |
| struct zfcp_port *port; |
| int d_id = ntoh24(sr_buf->d_id); |
| |
| read_lock_irqsave(&adapter->port_list_lock, flags); |
| list_for_each_entry(port, &adapter->port_list, list) |
| if (port->d_id == d_id) { |
| zfcp_erp_port_reopen(port, 0, "fssrpc1"); |
| break; |
| } |
| read_unlock_irqrestore(&adapter->port_list_lock, flags); |
| } |
| |
| void zfcp_fsf_fc_host_link_down(struct zfcp_adapter *adapter) |
| { |
| struct Scsi_Host *shost = adapter->scsi_host; |
| |
| adapter->hydra_version = 0; |
| adapter->peer_wwpn = 0; |
| adapter->peer_wwnn = 0; |
| adapter->peer_d_id = 0; |
| |
| /* if there is no shost yet, we have nothing to zero-out */ |
| if (shost == NULL) |
| return; |
| |
| fc_host_port_id(shost) = 0; |
| fc_host_fabric_name(shost) = 0; |
| fc_host_speed(shost) = FC_PORTSPEED_UNKNOWN; |
| fc_host_port_type(shost) = FC_PORTTYPE_UNKNOWN; |
| snprintf(fc_host_model(shost), FC_SYMBOLIC_NAME_SIZE, "0x%04x", 0); |
| memset(fc_host_active_fc4s(shost), 0, FC_FC4_LIST_SIZE); |
| } |
| |
| static void zfcp_fsf_link_down_info_eval(struct zfcp_fsf_req *req, |
| struct fsf_link_down_info *link_down) |
| { |
| struct zfcp_adapter *adapter = req->adapter; |
| |
| if (atomic_read(&adapter->status) & ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED) |
| return; |
| |
| atomic_or(ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED, &adapter->status); |
| |
| zfcp_scsi_schedule_rports_block(adapter); |
| |
| zfcp_fsf_fc_host_link_down(adapter); |
| |
| if (!link_down) |
| goto out; |
| |
| switch (link_down->error_code) { |
| case FSF_PSQ_LINK_NO_LIGHT: |
| dev_warn(&req->adapter->ccw_device->dev, |
| "There is no light signal from the local " |
| "fibre channel cable\n"); |
| break; |
| case FSF_PSQ_LINK_WRAP_PLUG: |
| dev_warn(&req->adapter->ccw_device->dev, |
| "There is a wrap plug instead of a fibre " |
| "channel cable\n"); |
| break; |
| case FSF_PSQ_LINK_NO_FCP: |
| dev_warn(&req->adapter->ccw_device->dev, |
| "The adjacent fibre channel node does not " |
| "support FCP\n"); |
| break; |
| case FSF_PSQ_LINK_FIRMWARE_UPDATE: |
| dev_warn(&req->adapter->ccw_device->dev, |
| "The FCP device is suspended because of a " |
| "firmware update\n"); |
| break; |
| case FSF_PSQ_LINK_INVALID_WWPN: |
| dev_warn(&req->adapter->ccw_device->dev, |
| "The FCP device detected a WWPN that is " |
| "duplicate or not valid\n"); |
| break; |
| case FSF_PSQ_LINK_NO_NPIV_SUPPORT: |
| dev_warn(&req->adapter->ccw_device->dev, |
| "The fibre channel fabric does not support NPIV\n"); |
| break; |
| case FSF_PSQ_LINK_NO_FCP_RESOURCES: |
| dev_warn(&req->adapter->ccw_device->dev, |
| "The FCP adapter cannot support more NPIV ports\n"); |
| break; |
| case FSF_PSQ_LINK_NO_FABRIC_RESOURCES: |
| dev_warn(&req->adapter->ccw_device->dev, |
| "The adjacent switch cannot support " |
| "more NPIV ports\n"); |
| break; |
| case FSF_PSQ_LINK_FABRIC_LOGIN_UNABLE: |
| dev_warn(&req->adapter->ccw_device->dev, |
| "The FCP adapter could not log in to the " |
| "fibre channel fabric\n"); |
| break; |
| case FSF_PSQ_LINK_WWPN_ASSIGNMENT_CORRUPTED: |
| dev_warn(&req->adapter->ccw_device->dev, |
| "The WWPN assignment file on the FCP adapter " |
| "has been damaged\n"); |
| break; |
| case FSF_PSQ_LINK_MODE_TABLE_CURRUPTED: |
| dev_warn(&req->adapter->ccw_device->dev, |
| "The mode table on the FCP adapter " |
| "has been damaged\n"); |
| break; |
| case FSF_PSQ_LINK_NO_WWPN_ASSIGNMENT: |
| dev_warn(&req->adapter->ccw_device->dev, |
| "All NPIV ports on the FCP adapter have " |
| "been assigned\n"); |
| break; |
| default: |
| dev_warn(&req->adapter->ccw_device->dev, |
| "The link between the FCP adapter and " |
| "the FC fabric is down\n"); |
| } |
| out: |
| zfcp_erp_set_adapter_status(adapter, ZFCP_STATUS_COMMON_ERP_FAILED); |
| } |
| |
| static void zfcp_fsf_status_read_link_down(struct zfcp_fsf_req *req) |
| { |
| struct fsf_status_read_buffer *sr_buf = req->data; |
| struct fsf_link_down_info *ldi = |
| (struct fsf_link_down_info *) &sr_buf->payload; |
| |
| switch (sr_buf->status_subtype) { |
| case FSF_STATUS_READ_SUB_NO_PHYSICAL_LINK: |
| case FSF_STATUS_READ_SUB_FDISC_FAILED: |
| zfcp_fsf_link_down_info_eval(req, ldi); |
| break; |
| case FSF_STATUS_READ_SUB_FIRMWARE_UPDATE: |
| zfcp_fsf_link_down_info_eval(req, NULL); |
| } |
| } |
| |
| static void |
| zfcp_fsf_status_read_version_change(struct zfcp_adapter *adapter, |
| struct fsf_status_read_buffer *sr_buf) |
| { |
| if (sr_buf->status_subtype == FSF_STATUS_READ_SUB_LIC_CHANGE) { |
| u32 version = sr_buf->payload.version_change.current_version; |
| |
| WRITE_ONCE(adapter->fsf_lic_version, version); |
| snprintf(fc_host_firmware_version(adapter->scsi_host), |
| FC_VERSION_STRING_SIZE, "%#08x", version); |
| } |
| } |
| |
| static void zfcp_fsf_status_read_handler(struct zfcp_fsf_req *req) |
| { |
| struct zfcp_adapter *adapter = req->adapter; |
| struct fsf_status_read_buffer *sr_buf = req->data; |
| |
| if (req->status & ZFCP_STATUS_FSFREQ_DISMISSED) { |
| zfcp_dbf_hba_fsf_uss("fssrh_1", req); |
| mempool_free(virt_to_page(sr_buf), adapter->pool.sr_data); |
| zfcp_fsf_req_free(req); |
| return; |
| } |
| |
| zfcp_dbf_hba_fsf_uss("fssrh_4", req); |
| |
| switch (sr_buf->status_type) { |
| case FSF_STATUS_READ_PORT_CLOSED: |
| zfcp_fsf_status_read_port_closed(req); |
| break; |
| case FSF_STATUS_READ_INCOMING_ELS: |
| zfcp_fc_incoming_els(req); |
| break; |
| case FSF_STATUS_READ_SENSE_DATA_AVAIL: |
| break; |
| case FSF_STATUS_READ_BIT_ERROR_THRESHOLD: |
| zfcp_dbf_hba_bit_err("fssrh_3", req); |
| if (ber_stop) { |
| dev_warn(&adapter->ccw_device->dev, |
| "All paths over this FCP device are disused because of excessive bit errors\n"); |
| zfcp_erp_adapter_shutdown(adapter, 0, "fssrh_b"); |
| } else { |
| dev_warn(&adapter->ccw_device->dev, |
| "The error threshold for checksum statistics has been exceeded\n"); |
| } |
| break; |
| case FSF_STATUS_READ_LINK_DOWN: |
| zfcp_fsf_status_read_link_down(req); |
| zfcp_fc_enqueue_event(adapter, FCH_EVT_LINKDOWN, 0); |
| break; |
| case FSF_STATUS_READ_LINK_UP: |
| dev_info(&adapter->ccw_device->dev, |
| "The local link has been restored\n"); |
| /* All ports should be marked as ready to run again */ |
| zfcp_erp_set_adapter_status(adapter, |
| ZFCP_STATUS_COMMON_RUNNING); |
| zfcp_erp_adapter_reopen(adapter, |
| ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED | |
| ZFCP_STATUS_COMMON_ERP_FAILED, |
| "fssrh_2"); |
| zfcp_fc_enqueue_event(adapter, FCH_EVT_LINKUP, 0); |
| |
| break; |
| case FSF_STATUS_READ_NOTIFICATION_LOST: |
| if (sr_buf->status_subtype & FSF_STATUS_READ_SUB_INCOMING_ELS) |
| zfcp_fc_conditional_port_scan(adapter); |
| if (sr_buf->status_subtype & FSF_STATUS_READ_SUB_VERSION_CHANGE) |
| queue_work(adapter->work_queue, |
| &adapter->version_change_lost_work); |
| break; |
| case FSF_STATUS_READ_FEATURE_UPDATE_ALERT: |
| adapter->adapter_features = sr_buf->payload.word[0]; |
| break; |
| case FSF_STATUS_READ_VERSION_CHANGE: |
| zfcp_fsf_status_read_version_change(adapter, sr_buf); |
| break; |
| } |
| |
| mempool_free(virt_to_page(sr_buf), adapter->pool.sr_data); |
| zfcp_fsf_req_free(req); |
| |
| atomic_inc(&adapter->stat_miss); |
| queue_work(adapter->work_queue, &adapter->stat_work); |
| } |
| |
| static void zfcp_fsf_fsfstatus_qual_eval(struct zfcp_fsf_req *req) |
| { |
| switch (req->qtcb->header.fsf_status_qual.word[0]) { |
| case FSF_SQ_FCP_RSP_AVAILABLE: |
| case FSF_SQ_INVOKE_LINK_TEST_PROCEDURE: |
| case FSF_SQ_NO_RETRY_POSSIBLE: |
| case FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED: |
| return; |
| case FSF_SQ_COMMAND_ABORTED: |
| break; |
| case FSF_SQ_NO_RECOM: |
| dev_err(&req->adapter->ccw_device->dev, |
| "The FCP adapter reported a problem " |
| "that cannot be recovered\n"); |
| zfcp_qdio_siosl(req->adapter); |
| zfcp_erp_adapter_shutdown(req->adapter, 0, "fsfsqe1"); |
| break; |
| } |
| /* all non-return stats set FSFREQ_ERROR*/ |
| req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
| } |
| |
| static void zfcp_fsf_fsfstatus_eval(struct zfcp_fsf_req *req) |
| { |
| if (unlikely(req->status & ZFCP_STATUS_FSFREQ_ERROR)) |
| return; |
| |
| switch (req->qtcb->header.fsf_status) { |
| case FSF_UNKNOWN_COMMAND: |
| dev_err(&req->adapter->ccw_device->dev, |
| "The FCP adapter does not recognize the command 0x%x\n", |
| req->qtcb->header.fsf_command); |
| zfcp_erp_adapter_shutdown(req->adapter, 0, "fsfse_1"); |
| req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
| break; |
| case FSF_ADAPTER_STATUS_AVAILABLE: |
| zfcp_fsf_fsfstatus_qual_eval(req); |
| break; |
| } |
| } |
| |
| static void zfcp_fsf_protstatus_eval(struct zfcp_fsf_req *req) |
| { |
| struct zfcp_adapter *adapter = req->adapter; |
| struct fsf_qtcb *qtcb = req->qtcb; |
| union fsf_prot_status_qual *psq = &qtcb->prefix.prot_status_qual; |
| |
| zfcp_dbf_hba_fsf_response(req); |
| |
| if (req->status & ZFCP_STATUS_FSFREQ_DISMISSED) { |
| req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
| return; |
| } |
| |
| switch (qtcb->prefix.prot_status) { |
| case FSF_PROT_GOOD: |
| case FSF_PROT_FSF_STATUS_PRESENTED: |
| return; |
| case FSF_PROT_QTCB_VERSION_ERROR: |
| dev_err(&adapter->ccw_device->dev, |
| "QTCB version 0x%x not supported by FCP adapter " |
| "(0x%x to 0x%x)\n", FSF_QTCB_CURRENT_VERSION, |
| psq->word[0], psq->word[1]); |
| zfcp_erp_adapter_shutdown(adapter, 0, "fspse_1"); |
| break; |
| case FSF_PROT_ERROR_STATE: |
| case FSF_PROT_SEQ_NUMB_ERROR: |
| zfcp_erp_adapter_reopen(adapter, 0, "fspse_2"); |
| req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
| break; |
| case FSF_PROT_UNSUPP_QTCB_TYPE: |
| dev_err(&adapter->ccw_device->dev, |
| "The QTCB type is not supported by the FCP adapter\n"); |
| zfcp_erp_adapter_shutdown(adapter, 0, "fspse_3"); |
| break; |
| case FSF_PROT_HOST_CONNECTION_INITIALIZING: |
| atomic_or(ZFCP_STATUS_ADAPTER_HOST_CON_INIT, |
| &adapter->status); |
| break; |
| case FSF_PROT_DUPLICATE_REQUEST_ID: |
| dev_err(&adapter->ccw_device->dev, |
| "0x%Lx is an ambiguous request identifier\n", |
| (unsigned long long)qtcb->bottom.support.req_handle); |
| zfcp_erp_adapter_shutdown(adapter, 0, "fspse_4"); |
| break; |
| case FSF_PROT_LINK_DOWN: |
| zfcp_fsf_link_down_info_eval(req, &psq->link_down_info); |
| /* go through reopen to flush pending requests */ |
| zfcp_erp_adapter_reopen(adapter, 0, "fspse_6"); |
| break; |
| case FSF_PROT_REEST_QUEUE: |
| /* All ports should be marked as ready to run again */ |
| zfcp_erp_set_adapter_status(adapter, |
| ZFCP_STATUS_COMMON_RUNNING); |
| zfcp_erp_adapter_reopen(adapter, |
| ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED | |
| ZFCP_STATUS_COMMON_ERP_FAILED, |
| "fspse_8"); |
| break; |
| default: |
| dev_err(&adapter->ccw_device->dev, |
| "0x%x is not a valid transfer protocol status\n", |
| qtcb->prefix.prot_status); |
| zfcp_qdio_siosl(adapter); |
| zfcp_erp_adapter_shutdown(adapter, 0, "fspse_9"); |
| } |
| req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
| } |
| |
| /** |
| * zfcp_fsf_req_complete - process completion of a FSF request |
| * @req: The FSF request that has been completed. |
| * |
| * When a request has been completed either from the FCP adapter, |
| * or it has been dismissed due to a queue shutdown, this function |
| * is called to process the completion status and trigger further |
| * events related to the FSF request. |
| * Caller must ensure that the request has been removed from |
| * adapter->req_list, to protect against concurrent modification |
| * by zfcp_erp_strategy_check_fsfreq(). |
| */ |
| static void zfcp_fsf_req_complete(struct zfcp_fsf_req *req) |
| { |
| struct zfcp_erp_action *erp_action; |
| |
| if (unlikely(zfcp_fsf_req_is_status_read_buffer(req))) { |
| zfcp_fsf_status_read_handler(req); |
| return; |
| } |
| |
| del_timer_sync(&req->timer); |
| zfcp_fsf_protstatus_eval(req); |
| zfcp_fsf_fsfstatus_eval(req); |
| req->handler(req); |
| |
| erp_action = req->erp_action; |
| if (erp_action) |
| zfcp_erp_notify(erp_action, 0); |
| |
| if (likely(req->status & ZFCP_STATUS_FSFREQ_CLEANUP)) |
| zfcp_fsf_req_free(req); |
| else |
| complete(&req->completion); |
| } |
| |
| /** |
| * zfcp_fsf_req_dismiss_all - dismiss all fsf requests |
| * @adapter: pointer to struct zfcp_adapter |
| * |
| * Never ever call this without shutting down the adapter first. |
| * Otherwise the adapter would continue using and corrupting s390 storage. |
| * Included BUG_ON() call to ensure this is done. |
| * ERP is supposed to be the only user of this function. |
| */ |
| void zfcp_fsf_req_dismiss_all(struct zfcp_adapter *adapter) |
| { |
| struct zfcp_fsf_req *req, *tmp; |
| LIST_HEAD(remove_queue); |
| |
| BUG_ON(atomic_read(&adapter->status) & ZFCP_STATUS_ADAPTER_QDIOUP); |
| zfcp_reqlist_move(adapter->req_list, &remove_queue); |
| |
| list_for_each_entry_safe(req, tmp, &remove_queue, list) { |
| list_del(&req->list); |
| req->status |= ZFCP_STATUS_FSFREQ_DISMISSED; |
| zfcp_fsf_req_complete(req); |
| } |
| } |
| |
| #define ZFCP_FSF_PORTSPEED_1GBIT (1 << 0) |
| #define ZFCP_FSF_PORTSPEED_2GBIT (1 << 1) |
| #define ZFCP_FSF_PORTSPEED_4GBIT (1 << 2) |
| #define ZFCP_FSF_PORTSPEED_10GBIT (1 << 3) |
| #define ZFCP_FSF_PORTSPEED_8GBIT (1 << 4) |
| #define ZFCP_FSF_PORTSPEED_16GBIT (1 << 5) |
| #define ZFCP_FSF_PORTSPEED_32GBIT (1 << 6) |
| #define ZFCP_FSF_PORTSPEED_64GBIT (1 << 7) |
| #define ZFCP_FSF_PORTSPEED_128GBIT (1 << 8) |
| #define ZFCP_FSF_PORTSPEED_NOT_NEGOTIATED (1 << 15) |
| |
| u32 zfcp_fsf_convert_portspeed(u32 fsf_speed) |
| { |
| u32 fdmi_speed = 0; |
| if (fsf_speed & ZFCP_FSF_PORTSPEED_1GBIT) |
| fdmi_speed |= FC_PORTSPEED_1GBIT; |
| if (fsf_speed & ZFCP_FSF_PORTSPEED_2GBIT) |
| fdmi_speed |= FC_PORTSPEED_2GBIT; |
| if (fsf_speed & ZFCP_FSF_PORTSPEED_4GBIT) |
| fdmi_speed |= FC_PORTSPEED_4GBIT; |
| if (fsf_speed & ZFCP_FSF_PORTSPEED_10GBIT) |
| fdmi_speed |= FC_PORTSPEED_10GBIT; |
| if (fsf_speed & ZFCP_FSF_PORTSPEED_8GBIT) |
| fdmi_speed |= FC_PORTSPEED_8GBIT; |
| if (fsf_speed & ZFCP_FSF_PORTSPEED_16GBIT) |
| fdmi_speed |= FC_PORTSPEED_16GBIT; |
| if (fsf_speed & ZFCP_FSF_PORTSPEED_32GBIT) |
| fdmi_speed |= FC_PORTSPEED_32GBIT; |
| if (fsf_speed & ZFCP_FSF_PORTSPEED_64GBIT) |
| fdmi_speed |= FC_PORTSPEED_64GBIT; |
| if (fsf_speed & ZFCP_FSF_PORTSPEED_128GBIT) |
| fdmi_speed |= FC_PORTSPEED_128GBIT; |
| if (fsf_speed & ZFCP_FSF_PORTSPEED_NOT_NEGOTIATED) |
| fdmi_speed |= FC_PORTSPEED_NOT_NEGOTIATED; |
| return fdmi_speed; |
| } |
| |
| static int zfcp_fsf_exchange_config_evaluate(struct zfcp_fsf_req *req) |
| { |
| struct fsf_qtcb_bottom_config *bottom = &req->qtcb->bottom.config; |
| struct zfcp_adapter *adapter = req->adapter; |
| struct fc_els_flogi *plogi; |
| |
| /* adjust pointers for missing command code */ |
| plogi = (struct fc_els_flogi *) ((u8 *)&bottom->plogi_payload |
| - sizeof(u32)); |
| |
| if (req->data) |
| memcpy(req->data, bottom, sizeof(*bottom)); |
| |
| adapter->timer_ticks = bottom->timer_interval & ZFCP_FSF_TIMER_INT_MASK; |
| adapter->stat_read_buf_num = max(bottom->status_read_buf_num, |
| (u16)FSF_STATUS_READS_RECOM); |
| |
| /* no error return above here, otherwise must fix call chains */ |
| /* do not evaluate invalid fields */ |
| if (req->qtcb->header.fsf_status == FSF_EXCHANGE_CONFIG_DATA_INCOMPLETE) |
| return 0; |
| |
| adapter->hydra_version = bottom->adapter_type; |
| |
| switch (bottom->fc_topology) { |
| case FSF_TOPO_P2P: |
| adapter->peer_d_id = ntoh24(bottom->peer_d_id); |
| adapter->peer_wwpn = be64_to_cpu(plogi->fl_wwpn); |
| adapter->peer_wwnn = be64_to_cpu(plogi->fl_wwnn); |
| break; |
| case FSF_TOPO_FABRIC: |
| break; |
| case FSF_TOPO_AL: |
| default: |
| dev_err(&adapter->ccw_device->dev, |
| "Unknown or unsupported arbitrated loop " |
| "fibre channel topology detected\n"); |
| zfcp_erp_adapter_shutdown(adapter, 0, "fsece_1"); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static void zfcp_fsf_exchange_config_data_handler(struct zfcp_fsf_req *req) |
| { |
| struct zfcp_adapter *adapter = req->adapter; |
| struct zfcp_diag_header *const diag_hdr = |
| &adapter->diagnostics->config_data.header; |
| struct fsf_qtcb *qtcb = req->qtcb; |
| struct fsf_qtcb_bottom_config *bottom = &qtcb->bottom.config; |
| |
| if (req->status & ZFCP_STATUS_FSFREQ_ERROR) |
| return; |
| |
| adapter->fsf_lic_version = bottom->lic_version; |
| adapter->adapter_features = bottom->adapter_features; |
| adapter->connection_features = bottom->connection_features; |
| adapter->peer_wwpn = 0; |
| adapter->peer_wwnn = 0; |
| adapter->peer_d_id = 0; |
| |
| switch (qtcb->header.fsf_status) { |
| case FSF_GOOD: |
| /* |
| * usually we wait with an update till the cache is too old, |
| * but because we have the data available, update it anyway |
| */ |
| zfcp_diag_update_xdata(diag_hdr, bottom, false); |
| |
| zfcp_scsi_shost_update_config_data(adapter, bottom, false); |
| if (zfcp_fsf_exchange_config_evaluate(req)) |
| return; |
| |
| if (bottom->max_qtcb_size < sizeof(struct fsf_qtcb)) { |
| dev_err(&adapter->ccw_device->dev, |
| "FCP adapter maximum QTCB size (%d bytes) " |
| "is too small\n", |
| bottom->max_qtcb_size); |
| zfcp_erp_adapter_shutdown(adapter, 0, "fsecdh1"); |
| return; |
| } |
| atomic_or(ZFCP_STATUS_ADAPTER_XCONFIG_OK, |
| &adapter->status); |
| break; |
| case FSF_EXCHANGE_CONFIG_DATA_INCOMPLETE: |
| zfcp_diag_update_xdata(diag_hdr, bottom, true); |
| req->status |= ZFCP_STATUS_FSFREQ_XDATAINCOMPLETE; |
| |
| /* avoids adapter shutdown to be able to recognize |
| * events such as LINK UP */ |
| atomic_or(ZFCP_STATUS_ADAPTER_XCONFIG_OK, |
| &adapter->status); |
| zfcp_fsf_link_down_info_eval(req, |
| &qtcb->header.fsf_status_qual.link_down_info); |
| |
| zfcp_scsi_shost_update_config_data(adapter, bottom, true); |
| if (zfcp_fsf_exchange_config_evaluate(req)) |
| return; |
| break; |
| default: |
| zfcp_erp_adapter_shutdown(adapter, 0, "fsecdh3"); |
| return; |
| } |
| |
| if (adapter->adapter_features & FSF_FEATURE_HBAAPI_MANAGEMENT) |
| adapter->hardware_version = bottom->hardware_version; |
| |
| if (FSF_QTCB_CURRENT_VERSION < bottom->low_qtcb_version) { |
| dev_err(&adapter->ccw_device->dev, |
| "The FCP adapter only supports newer " |
| "control block versions\n"); |
| zfcp_erp_adapter_shutdown(adapter, 0, "fsecdh4"); |
| return; |
| } |
| if (FSF_QTCB_CURRENT_VERSION > bottom->high_qtcb_version) { |
| dev_err(&adapter->ccw_device->dev, |
| "The FCP adapter only supports older " |
| "control block versions\n"); |
| zfcp_erp_adapter_shutdown(adapter, 0, "fsecdh5"); |
| } |
| } |
| |
| /* |
| * Mapping of FC Endpoint Security flag masks to mnemonics |
| * |
| * NOTE: Update macro ZFCP_FSF_MAX_FC_SECURITY_MNEMONIC_LENGTH when making any |
| * changes. |
| */ |
| static const struct { |
| u32 mask; |
| char *name; |
| } zfcp_fsf_fc_security_mnemonics[] = { |
| { FSF_FC_SECURITY_AUTH, "Authentication" }, |
| { FSF_FC_SECURITY_ENC_FCSP2 | |
| FSF_FC_SECURITY_ENC_ERAS, "Encryption" }, |
| }; |
| |
| /* maximum strlen(zfcp_fsf_fc_security_mnemonics[...].name) + 1 */ |
| #define ZFCP_FSF_MAX_FC_SECURITY_MNEMONIC_LENGTH 15 |
| |
| /** |
| * zfcp_fsf_scnprint_fc_security() - translate FC Endpoint Security flags into |
| * mnemonics and place in a buffer |
| * @buf : the buffer to place the translated FC Endpoint Security flag(s) |
| * into |
| * @size : the size of the buffer, including the trailing null space |
| * @fc_security: one or more FC Endpoint Security flags, or zero |
| * @fmt : specifies whether a list or a single item is to be put into the |
| * buffer |
| * |
| * The Fibre Channel (FC) Endpoint Security flags are translated into mnemonics. |
| * If the FC Endpoint Security flags are zero "none" is placed into the buffer. |
| * |
| * With ZFCP_FSF_PRINT_FMT_LIST the mnemonics are placed as a list separated by |
| * a comma followed by a space into the buffer. If one or more FC Endpoint |
| * Security flags cannot be translated into a mnemonic, as they are undefined |
| * in zfcp_fsf_fc_security_mnemonics, their bitwise ORed value in hexadecimal |
| * representation is placed into the buffer. |
| * |
| * With ZFCP_FSF_PRINT_FMT_SINGLEITEM only one single mnemonic is placed into |
| * the buffer. If the FC Endpoint Security flag cannot be translated, as it is |
| * undefined in zfcp_fsf_fc_security_mnemonics, its value in hexadecimal |
| * representation is placed into the buffer. If more than one FC Endpoint |
| * Security flag was specified, their value in hexadecimal representation is |
| * placed into the buffer. The macro ZFCP_FSF_MAX_FC_SECURITY_MNEMONIC_LENGTH |
| * can be used to define a buffer that is large enough to hold one mnemonic. |
| * |
| * Return: The number of characters written into buf not including the trailing |
| * '\0'. If size is == 0 the function returns 0. |
| */ |
| ssize_t zfcp_fsf_scnprint_fc_security(char *buf, size_t size, u32 fc_security, |
| enum zfcp_fsf_print_fmt fmt) |
| { |
| const char *prefix = ""; |
| ssize_t len = 0; |
| int i; |
| |
| if (fc_security == 0) |
| return scnprintf(buf, size, "none"); |
| if (fmt == ZFCP_FSF_PRINT_FMT_SINGLEITEM && hweight32(fc_security) != 1) |
| return scnprintf(buf, size, "0x%08x", fc_security); |
| |
| for (i = 0; i < ARRAY_SIZE(zfcp_fsf_fc_security_mnemonics); i++) { |
| if (!(fc_security & zfcp_fsf_fc_security_mnemonics[i].mask)) |
| continue; |
| |
| len += scnprintf(buf + len, size - len, "%s%s", prefix, |
| zfcp_fsf_fc_security_mnemonics[i].name); |
| prefix = ", "; |
| fc_security &= ~zfcp_fsf_fc_security_mnemonics[i].mask; |
| } |
| |
| if (fc_security != 0) |
| len += scnprintf(buf + len, size - len, "%s0x%08x", |
| prefix, fc_security); |
| |
| return len; |
| } |
| |
| static void zfcp_fsf_dbf_adapter_fc_security(struct zfcp_adapter *adapter, |
| struct zfcp_fsf_req *req) |
| { |
| if (adapter->fc_security_algorithms == |
| adapter->fc_security_algorithms_old) { |
| /* no change, no trace */ |
| return; |
| } |
| |
| zfcp_dbf_hba_fsf_fces("fsfcesa", req, ZFCP_DBF_INVALID_WWPN, |
| adapter->fc_security_algorithms_old, |
| adapter->fc_security_algorithms); |
| |
| adapter->fc_security_algorithms_old = adapter->fc_security_algorithms; |
| } |
| |
| static void zfcp_fsf_exchange_port_evaluate(struct zfcp_fsf_req *req) |
| { |
| struct zfcp_adapter *adapter = req->adapter; |
| struct fsf_qtcb_bottom_port *bottom = &req->qtcb->bottom.port; |
| |
| if (req->data) |
| memcpy(req->data, bottom, sizeof(*bottom)); |
| |
| if (adapter->adapter_features & FSF_FEATURE_FC_SECURITY) |
| adapter->fc_security_algorithms = |
| bottom->fc_security_algorithms; |
| else |
| adapter->fc_security_algorithms = 0; |
| zfcp_fsf_dbf_adapter_fc_security(adapter, req); |
| } |
| |
| static void zfcp_fsf_exchange_port_data_handler(struct zfcp_fsf_req *req) |
| { |
| struct zfcp_diag_header *const diag_hdr = |
| &req->adapter->diagnostics->port_data.header; |
| struct fsf_qtcb *qtcb = req->qtcb; |
| struct fsf_qtcb_bottom_port *bottom = &qtcb->bottom.port; |
| |
| if (req->status & ZFCP_STATUS_FSFREQ_ERROR) |
| return; |
| |
| switch (qtcb->header.fsf_status) { |
| case FSF_GOOD: |
| /* |
| * usually we wait with an update till the cache is too old, |
| * but because we have the data available, update it anyway |
| */ |
| zfcp_diag_update_xdata(diag_hdr, bottom, false); |
| |
| zfcp_scsi_shost_update_port_data(req->adapter, bottom); |
| zfcp_fsf_exchange_port_evaluate(req); |
| break; |
| case FSF_EXCHANGE_CONFIG_DATA_INCOMPLETE: |
| zfcp_diag_update_xdata(diag_hdr, bottom, true); |
| req->status |= ZFCP_STATUS_FSFREQ_XDATAINCOMPLETE; |
| |
| zfcp_fsf_link_down_info_eval(req, |
| &qtcb->header.fsf_status_qual.link_down_info); |
| |
| zfcp_scsi_shost_update_port_data(req->adapter, bottom); |
| zfcp_fsf_exchange_port_evaluate(req); |
| break; |
| } |
| } |
| |
| static struct zfcp_fsf_req *zfcp_fsf_alloc(mempool_t *pool) |
| { |
| struct zfcp_fsf_req *req; |
| |
| if (likely(pool)) |
| req = mempool_alloc(pool, GFP_ATOMIC); |
| else |
| req = kmalloc(sizeof(*req), GFP_ATOMIC); |
| |
| if (unlikely(!req)) |
| return NULL; |
| |
| memset(req, 0, sizeof(*req)); |
| req->pool = pool; |
| return req; |
| } |
| |
| static struct fsf_qtcb *zfcp_fsf_qtcb_alloc(mempool_t *pool) |
| { |
| struct fsf_qtcb *qtcb; |
| |
| if (likely(pool)) |
| qtcb = mempool_alloc(pool, GFP_ATOMIC); |
| else |
| qtcb = kmem_cache_alloc(zfcp_fsf_qtcb_cache, GFP_ATOMIC); |
| |
| if (unlikely(!qtcb)) |
| return NULL; |
| |
| memset(qtcb, 0, sizeof(*qtcb)); |
| return qtcb; |
| } |
| |
| static struct zfcp_fsf_req *zfcp_fsf_req_create(struct zfcp_qdio *qdio, |
| u32 fsf_cmd, u8 sbtype, |
| mempool_t *pool) |
| { |
| struct zfcp_adapter *adapter = qdio->adapter; |
| struct zfcp_fsf_req *req = zfcp_fsf_alloc(pool); |
| |
| if (unlikely(!req)) |
| return ERR_PTR(-ENOMEM); |
| |
| if (adapter->req_no == 0) |
| adapter->req_no++; |
| |
| timer_setup(&req->timer, NULL, 0); |
| init_completion(&req->completion); |
| |
| req->adapter = adapter; |
| req->req_id = adapter->req_no; |
| |
| if (likely(fsf_cmd != FSF_QTCB_UNSOLICITED_STATUS)) { |
| if (likely(pool)) |
| req->qtcb = zfcp_fsf_qtcb_alloc( |
| adapter->pool.qtcb_pool); |
| else |
| req->qtcb = zfcp_fsf_qtcb_alloc(NULL); |
| |
| if (unlikely(!req->qtcb)) { |
| zfcp_fsf_req_free(req); |
| return ERR_PTR(-ENOMEM); |
| } |
| |
| req->qtcb->prefix.req_seq_no = adapter->fsf_req_seq_no; |
| req->qtcb->prefix.req_id = req->req_id; |
| req->qtcb->prefix.ulp_info = 26; |
| req->qtcb->prefix.qtcb_type = fsf_qtcb_type[fsf_cmd]; |
| req->qtcb->prefix.qtcb_version = FSF_QTCB_CURRENT_VERSION; |
| req->qtcb->header.req_handle = req->req_id; |
| req->qtcb->header.fsf_command = fsf_cmd; |
| } |
| |
| zfcp_qdio_req_init(adapter->qdio, &req->qdio_req, req->req_id, sbtype, |
| req->qtcb, sizeof(struct fsf_qtcb)); |
| |
| return req; |
| } |
| |
| static int zfcp_fsf_req_send(struct zfcp_fsf_req *req) |
| { |
| const bool is_srb = zfcp_fsf_req_is_status_read_buffer(req); |
| struct zfcp_adapter *adapter = req->adapter; |
| struct zfcp_qdio *qdio = adapter->qdio; |
| unsigned long req_id = req->req_id; |
| |
| zfcp_reqlist_add(adapter->req_list, req); |
| |
| req->qdio_req.qdio_outb_usage = atomic_read(&qdio->req_q_free); |
| req->issued = get_tod_clock(); |
| if (zfcp_qdio_send(qdio, &req->qdio_req)) { |
| del_timer_sync(&req->timer); |
| /* lookup request again, list might have changed */ |
| zfcp_reqlist_find_rm(adapter->req_list, req_id); |
| zfcp_erp_adapter_reopen(adapter, 0, "fsrs__1"); |
| return -EIO; |
| } |
| |
| /* |
| * NOTE: DO NOT TOUCH ASYNC req PAST THIS POINT. |
| * ONLY TOUCH SYNC req AGAIN ON req->completion. |
| * |
| * The request might complete and be freed concurrently at any point |
| * now. This is not protected by the QDIO-lock (req_q_lock). So any |
| * uncontrolled access after this might result in an use-after-free bug. |
| * Only if the request doesn't have ZFCP_STATUS_FSFREQ_CLEANUP set, and |
| * when it is completed via req->completion, is it safe to use req |
| * again. |
| */ |
| |
| /* Don't increase for unsolicited status */ |
| if (!is_srb) |
| adapter->fsf_req_seq_no++; |
| adapter->req_no++; |
| |
| return 0; |
| } |
| |
| /** |
| * zfcp_fsf_status_read - send status read request |
| * @qdio: pointer to struct zfcp_qdio |
| * Returns: 0 on success, ERROR otherwise |
| */ |
| int zfcp_fsf_status_read(struct zfcp_qdio *qdio) |
| { |
| struct zfcp_adapter *adapter = qdio->adapter; |
| struct zfcp_fsf_req *req; |
| struct fsf_status_read_buffer *sr_buf; |
| struct page *page; |
| int retval = -EIO; |
| |
| spin_lock_irq(&qdio->req_q_lock); |
| if (zfcp_qdio_sbal_get(qdio)) |
| goto out; |
| |
| req = zfcp_fsf_req_create(qdio, FSF_QTCB_UNSOLICITED_STATUS, |
| SBAL_SFLAGS0_TYPE_STATUS, |
| adapter->pool.status_read_req); |
| if (IS_ERR(req)) { |
| retval = PTR_ERR(req); |
| goto out; |
| } |
| |
| page = mempool_alloc(adapter->pool.sr_data, GFP_ATOMIC); |
| if (!page) { |
| retval = -ENOMEM; |
| goto failed_buf; |
| } |
| sr_buf = page_address(page); |
| memset(sr_buf, 0, sizeof(*sr_buf)); |
| req->data = sr_buf; |
| |
| zfcp_qdio_fill_next(qdio, &req->qdio_req, sr_buf, sizeof(*sr_buf)); |
| zfcp_qdio_set_sbale_last(qdio, &req->qdio_req); |
| |
| retval = zfcp_fsf_req_send(req); |
| if (retval) |
| goto failed_req_send; |
| /* NOTE: DO NOT TOUCH req PAST THIS POINT! */ |
| |
| goto out; |
| |
| failed_req_send: |
| req->data = NULL; |
| mempool_free(virt_to_page(sr_buf), adapter->pool.sr_data); |
| failed_buf: |
| zfcp_dbf_hba_fsf_uss("fssr__1", req); |
| zfcp_fsf_req_free(req); |
| out: |
| spin_unlock_irq(&qdio->req_q_lock); |
| return retval; |
| } |
| |
| static void zfcp_fsf_abort_fcp_command_handler(struct zfcp_fsf_req *req) |
| { |
| struct scsi_device *sdev = req->data; |
| struct zfcp_scsi_dev *zfcp_sdev; |
| union fsf_status_qual *fsq = &req->qtcb->header.fsf_status_qual; |
| |
| if (req->status & ZFCP_STATUS_FSFREQ_ERROR) |
| return; |
| |
| zfcp_sdev = sdev_to_zfcp(sdev); |
| |
| switch (req->qtcb->header.fsf_status) { |
| case FSF_PORT_HANDLE_NOT_VALID: |
| if (fsq->word[0] == fsq->word[1]) { |
| zfcp_erp_adapter_reopen(zfcp_sdev->port->adapter, 0, |
| "fsafch1"); |
| req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
| } |
| break; |
| case FSF_LUN_HANDLE_NOT_VALID: |
| if (fsq->word[0] == fsq->word[1]) { |
| zfcp_erp_port_reopen(zfcp_sdev->port, 0, "fsafch2"); |
| req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
| } |
| break; |
| case FSF_FCP_COMMAND_DOES_NOT_EXIST: |
| req->status |= ZFCP_STATUS_FSFREQ_ABORTNOTNEEDED; |
| break; |
| case FSF_PORT_BOXED: |
| zfcp_erp_set_port_status(zfcp_sdev->port, |
| ZFCP_STATUS_COMMON_ACCESS_BOXED); |
| zfcp_erp_port_reopen(zfcp_sdev->port, |
| ZFCP_STATUS_COMMON_ERP_FAILED, "fsafch3"); |
| req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
| break; |
| case FSF_LUN_BOXED: |
| zfcp_erp_set_lun_status(sdev, ZFCP_STATUS_COMMON_ACCESS_BOXED); |
| zfcp_erp_lun_reopen(sdev, ZFCP_STATUS_COMMON_ERP_FAILED, |
| "fsafch4"); |
| req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
| break; |
| case FSF_ADAPTER_STATUS_AVAILABLE: |
| switch (fsq->word[0]) { |
| case FSF_SQ_INVOKE_LINK_TEST_PROCEDURE: |
| zfcp_fc_test_link(zfcp_sdev->port); |
| fallthrough; |
| case FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED: |
| req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
| break; |
| } |
| break; |
| case FSF_GOOD: |
| req->status |= ZFCP_STATUS_FSFREQ_ABORTSUCCEEDED; |
| break; |
| } |
| } |
| |
| /** |
| * zfcp_fsf_abort_fcp_cmnd - abort running SCSI command |
| * @scmnd: The SCSI command to abort |
| * Returns: pointer to struct zfcp_fsf_req |
| */ |
| |
| struct zfcp_fsf_req *zfcp_fsf_abort_fcp_cmnd(struct scsi_cmnd *scmnd) |
| { |
| struct zfcp_fsf_req *req = NULL; |
| struct scsi_device *sdev = scmnd->device; |
| struct zfcp_scsi_dev *zfcp_sdev = sdev_to_zfcp(sdev); |
| struct zfcp_qdio *qdio = zfcp_sdev->port->adapter->qdio; |
| unsigned long old_req_id = (unsigned long) scmnd->host_scribble; |
| |
| spin_lock_irq(&qdio->req_q_lock); |
| if (zfcp_qdio_sbal_get(qdio)) |
| goto out; |
| req = zfcp_fsf_req_create(qdio, FSF_QTCB_ABORT_FCP_CMND, |
| SBAL_SFLAGS0_TYPE_READ, |
| qdio->adapter->pool.scsi_abort); |
| if (IS_ERR(req)) { |
| req = NULL; |
| goto out; |
| } |
| |
| if (unlikely(!(atomic_read(&zfcp_sdev->status) & |
| ZFCP_STATUS_COMMON_UNBLOCKED))) |
| goto out_error_free; |
| |
| zfcp_qdio_set_sbale_last(qdio, &req->qdio_req); |
| |
| req->data = sdev; |
| req->handler = zfcp_fsf_abort_fcp_command_handler; |
| req->qtcb->header.lun_handle = zfcp_sdev->lun_handle; |
| req->qtcb->header.port_handle = zfcp_sdev->port->handle; |
| req->qtcb->bottom.support.req_handle = (u64) old_req_id; |
| |
| zfcp_fsf_start_timer(req, ZFCP_FSF_SCSI_ER_TIMEOUT); |
| if (!zfcp_fsf_req_send(req)) { |
| /* NOTE: DO NOT TOUCH req, UNTIL IT COMPLETES! */ |
| goto out; |
| } |
| |
| out_error_free: |
| zfcp_fsf_req_free(req); |
| req = NULL; |
| out: |
| spin_unlock_irq(&qdio->req_q_lock); |
| return req; |
| } |
| |
| static void zfcp_fsf_send_ct_handler(struct zfcp_fsf_req *req) |
| { |
| struct zfcp_adapter *adapter = req->adapter; |
| struct zfcp_fsf_ct_els *ct = req->data; |
| struct fsf_qtcb_header *header = &req->qtcb->header; |
| |
| ct->status = -EINVAL; |
| |
| if (req->status & ZFCP_STATUS_FSFREQ_ERROR) |
| goto skip_fsfstatus; |
| |
| switch (header->fsf_status) { |
| case FSF_GOOD: |
| ct->status = 0; |
| zfcp_dbf_san_res("fsscth2", req); |
| break; |
| case FSF_SERVICE_CLASS_NOT_SUPPORTED: |
| zfcp_fsf_class_not_supp(req); |
| break; |
| case FSF_ADAPTER_STATUS_AVAILABLE: |
| switch (header->fsf_status_qual.word[0]){ |
| case FSF_SQ_INVOKE_LINK_TEST_PROCEDURE: |
| case FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED: |
| req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
| break; |
| } |
| break; |
| case FSF_PORT_BOXED: |
| req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
| break; |
| case FSF_PORT_HANDLE_NOT_VALID: |
| zfcp_erp_adapter_reopen(adapter, 0, "fsscth1"); |
| fallthrough; |
| case FSF_GENERIC_COMMAND_REJECTED: |
| case FSF_PAYLOAD_SIZE_MISMATCH: |
| case FSF_REQUEST_SIZE_TOO_LARGE: |
| case FSF_RESPONSE_SIZE_TOO_LARGE: |
| case FSF_SBAL_MISMATCH: |
| req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
| break; |
| } |
| |
| skip_fsfstatus: |
| if (ct->handler) |
| ct->handler(ct->handler_data); |
| } |
| |
| static void zfcp_fsf_setup_ct_els_unchained(struct zfcp_qdio *qdio, |
| struct zfcp_qdio_req *q_req, |
| struct scatterlist *sg_req, |
| struct scatterlist *sg_resp) |
| { |
| zfcp_qdio_fill_next(qdio, q_req, sg_virt(sg_req), sg_req->length); |
| zfcp_qdio_fill_next(qdio, q_req, sg_virt(sg_resp), sg_resp->length); |
| zfcp_qdio_set_sbale_last(qdio, q_req); |
| } |
| |
| static int zfcp_fsf_setup_ct_els_sbals(struct zfcp_fsf_req *req, |
| struct scatterlist *sg_req, |
| struct scatterlist *sg_resp) |
| { |
| struct zfcp_adapter *adapter = req->adapter; |
| struct zfcp_qdio *qdio = adapter->qdio; |
| struct fsf_qtcb *qtcb = req->qtcb; |
| u32 feat = adapter->adapter_features; |
| |
| if (zfcp_adapter_multi_buffer_active(adapter)) { |
| if (zfcp_qdio_sbals_from_sg(qdio, &req->qdio_req, sg_req)) |
| return -EIO; |
| qtcb->bottom.support.req_buf_length = |
| zfcp_qdio_real_bytes(sg_req); |
| if (zfcp_qdio_sbals_from_sg(qdio, &req->qdio_req, sg_resp)) |
| return -EIO; |
| qtcb->bottom.support.resp_buf_length = |
| zfcp_qdio_real_bytes(sg_resp); |
| |
| zfcp_qdio_set_data_div(qdio, &req->qdio_req, sg_nents(sg_req)); |
| zfcp_qdio_set_sbale_last(qdio, &req->qdio_req); |
| zfcp_qdio_set_scount(qdio, &req->qdio_req); |
| return 0; |
| } |
| |
| /* use single, unchained SBAL if it can hold the request */ |
| if (zfcp_qdio_sg_one_sbale(sg_req) && zfcp_qdio_sg_one_sbale(sg_resp)) { |
| zfcp_fsf_setup_ct_els_unchained(qdio, &req->qdio_req, |
| sg_req, sg_resp); |
| return 0; |
| } |
| |
| if (!(feat & FSF_FEATURE_ELS_CT_CHAINED_SBALS)) |
| return -EOPNOTSUPP; |
| |
| if (zfcp_qdio_sbals_from_sg(qdio, &req->qdio_req, sg_req)) |
| return -EIO; |
| |
| qtcb->bottom.support.req_buf_length = zfcp_qdio_real_bytes(sg_req); |
| |
| zfcp_qdio_set_sbale_last(qdio, &req->qdio_req); |
| zfcp_qdio_skip_to_last_sbale(qdio, &req->qdio_req); |
| |
| if (zfcp_qdio_sbals_from_sg(qdio, &req->qdio_req, sg_resp)) |
| return -EIO; |
| |
| qtcb->bottom.support.resp_buf_length = zfcp_qdio_real_bytes(sg_resp); |
| |
| zfcp_qdio_set_sbale_last(qdio, &req->qdio_req); |
| |
| return 0; |
| } |
| |
| static int zfcp_fsf_setup_ct_els(struct zfcp_fsf_req *req, |
| struct scatterlist *sg_req, |
| struct scatterlist *sg_resp, |
| unsigned int timeout) |
| { |
| int ret; |
| |
| ret = zfcp_fsf_setup_ct_els_sbals(req, sg_req, sg_resp); |
| if (ret) |
| return ret; |
| |
| /* common settings for ct/gs and els requests */ |
| if (timeout > 255) |
| timeout = 255; /* max value accepted by hardware */ |
| req->qtcb->bottom.support.service_class = FSF_CLASS_3; |
| req->qtcb->bottom.support.timeout = timeout; |
| zfcp_fsf_start_timer(req, (timeout + 10) * HZ); |
| |
| return 0; |
| } |
| |
| /** |
| * zfcp_fsf_send_ct - initiate a Generic Service request (FC-GS) |
| * @wka_port: pointer to zfcp WKA port to send CT/GS to |
| * @ct: pointer to struct zfcp_send_ct with data for request |
| * @pool: if non-null this mempool is used to allocate struct zfcp_fsf_req |
| * @timeout: timeout that hardware should use, and a later software timeout |
| */ |
| int zfcp_fsf_send_ct(struct zfcp_fc_wka_port *wka_port, |
| struct zfcp_fsf_ct_els *ct, mempool_t *pool, |
| unsigned int timeout) |
| { |
| struct zfcp_qdio *qdio = wka_port->adapter->qdio; |
| struct zfcp_fsf_req *req; |
| int ret = -EIO; |
| |
| spin_lock_irq(&qdio->req_q_lock); |
| if (zfcp_qdio_sbal_get(qdio)) |
| goto out; |
| |
| req = zfcp_fsf_req_create(qdio, FSF_QTCB_SEND_GENERIC, |
| SBAL_SFLAGS0_TYPE_WRITE_READ, pool); |
| |
| if (IS_ERR(req)) { |
| ret = PTR_ERR(req); |
| goto out; |
| } |
| |
| req->status |= ZFCP_STATUS_FSFREQ_CLEANUP; |
| ret = zfcp_fsf_setup_ct_els(req, ct->req, ct->resp, timeout); |
| if (ret) |
| goto failed_send; |
| |
| req->handler = zfcp_fsf_send_ct_handler; |
| req->qtcb->header.port_handle = wka_port->handle; |
| ct->d_id = wka_port->d_id; |
| req->data = ct; |
| |
| zfcp_dbf_san_req("fssct_1", req, wka_port->d_id); |
| |
| ret = zfcp_fsf_req_send(req); |
| if (ret) |
| goto failed_send; |
| /* NOTE: DO NOT TOUCH req PAST THIS POINT! */ |
| |
| goto out; |
| |
| failed_send: |
| zfcp_fsf_req_free(req); |
| out: |
| spin_unlock_irq(&qdio->req_q_lock); |
| return ret; |
| } |
| |
| static void zfcp_fsf_send_els_handler(struct zfcp_fsf_req *req) |
| { |
| struct zfcp_fsf_ct_els *send_els = req->data; |
| struct fsf_qtcb_header *header = &req->qtcb->header; |
| |
| send_els->status = -EINVAL; |
| |
| if (req->status & ZFCP_STATUS_FSFREQ_ERROR) |
| goto skip_fsfstatus; |
| |
| switch (header->fsf_status) { |
| case FSF_GOOD: |
| send_els->status = 0; |
| zfcp_dbf_san_res("fsselh1", req); |
| break; |
| case FSF_SERVICE_CLASS_NOT_SUPPORTED: |
| zfcp_fsf_class_not_supp(req); |
| break; |
| case FSF_ADAPTER_STATUS_AVAILABLE: |
| switch (header->fsf_status_qual.word[0]){ |
| case FSF_SQ_INVOKE_LINK_TEST_PROCEDURE: |
| case FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED: |
| case FSF_SQ_RETRY_IF_POSSIBLE: |
| req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
| break; |
| } |
| break; |
| case FSF_ELS_COMMAND_REJECTED: |
| case FSF_PAYLOAD_SIZE_MISMATCH: |
| case FSF_REQUEST_SIZE_TOO_LARGE: |
| case FSF_RESPONSE_SIZE_TOO_LARGE: |
| break; |
| case FSF_SBAL_MISMATCH: |
| /* should never occur, avoided in zfcp_fsf_send_els */ |
| fallthrough; |
| default: |
| req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
| break; |
| } |
| skip_fsfstatus: |
| if (send_els->handler) |
| send_els->handler(send_els->handler_data); |
| } |
| |
| /** |
| * zfcp_fsf_send_els - initiate an ELS command (FC-FS) |
| * @adapter: pointer to zfcp adapter |
| * @d_id: N_Port_ID to send ELS to |
| * @els: pointer to struct zfcp_send_els with data for the command |
| * @timeout: timeout that hardware should use, and a later software timeout |
| */ |
| int zfcp_fsf_send_els(struct zfcp_adapter *adapter, u32 d_id, |
| struct zfcp_fsf_ct_els *els, unsigned int timeout) |
| { |
| struct zfcp_fsf_req *req; |
| struct zfcp_qdio *qdio = adapter->qdio; |
| int ret = -EIO; |
| |
| spin_lock_irq(&qdio->req_q_lock); |
| if (zfcp_qdio_sbal_get(qdio)) |
| goto out; |
| |
| req = zfcp_fsf_req_create(qdio, FSF_QTCB_SEND_ELS, |
| SBAL_SFLAGS0_TYPE_WRITE_READ, NULL); |
| |
| if (IS_ERR(req)) { |
| ret = PTR_ERR(req); |
| goto out; |
| } |
| |
| req->status |= ZFCP_STATUS_FSFREQ_CLEANUP; |
| |
| if (!zfcp_adapter_multi_buffer_active(adapter)) |
| zfcp_qdio_sbal_limit(qdio, &req->qdio_req, 2); |
| |
| ret = zfcp_fsf_setup_ct_els(req, els->req, els->resp, timeout); |
| |
| if (ret) |
| goto failed_send; |
| |
| hton24(req->qtcb->bottom.support.d_id, d_id); |
| req->handler = zfcp_fsf_send_els_handler; |
| els->d_id = d_id; |
| req->data = els; |
| |
| zfcp_dbf_san_req("fssels1", req, d_id); |
| |
| ret = zfcp_fsf_req_send(req); |
| if (ret) |
| goto failed_send; |
| /* NOTE: DO NOT TOUCH req PAST THIS POINT! */ |
| |
| goto out; |
| |
| failed_send: |
| zfcp_fsf_req_free(req); |
| out: |
| spin_unlock_irq(&qdio->req_q_lock); |
| return ret; |
| } |
| |
| int zfcp_fsf_exchange_config_data(struct zfcp_erp_action *erp_action) |
| { |
| struct zfcp_fsf_req *req; |
| struct zfcp_qdio *qdio = erp_action->adapter->qdio; |
| int retval = -EIO; |
| |
| spin_lock_irq(&qdio->req_q_lock); |
| if (zfcp_qdio_sbal_get(qdio)) |
| goto out; |
| |
| req = zfcp_fsf_req_create(qdio, FSF_QTCB_EXCHANGE_CONFIG_DATA, |
| SBAL_SFLAGS0_TYPE_READ, |
| qdio->adapter->pool.erp_req); |
| |
| if (IS_ERR(req)) { |
| retval = PTR_ERR(req); |
| goto out; |
| } |
| |
| req->status |= ZFCP_STATUS_FSFREQ_CLEANUP; |
| zfcp_qdio_set_sbale_last(qdio, &req->qdio_req); |
| |
| req->qtcb->bottom.config.feature_selection = |
| FSF_FEATURE_NOTIFICATION_LOST | |
| FSF_FEATURE_UPDATE_ALERT | |
| FSF_FEATURE_REQUEST_SFP_DATA | |
| FSF_FEATURE_FC_SECURITY; |
| req->erp_action = erp_action; |
| req->handler = zfcp_fsf_exchange_config_data_handler; |
| erp_action->fsf_req_id = req->req_id; |
| |
| zfcp_fsf_start_erp_timer(req); |
| retval = zfcp_fsf_req_send(req); |
| if (retval) { |
| zfcp_fsf_req_free(req); |
| erp_action->fsf_req_id = 0; |
| } |
| /* NOTE: DO NOT TOUCH req PAST THIS POINT! */ |
| out: |
| spin_unlock_irq(&qdio->req_q_lock); |
| return retval; |
| } |
| |
| |
| /** |
| * zfcp_fsf_exchange_config_data_sync() - Request information about FCP channel. |
| * @qdio: pointer to the QDIO-Queue to use for sending the command. |
| * @data: pointer to the QTCB-Bottom for storing the result of the command, |
| * might be %NULL. |
| * |
| * Returns: |
| * * 0 - Exchange Config Data was successful, @data is complete |
| * * -EIO - Exchange Config Data was not successful, @data is invalid |
| * * -EAGAIN - @data contains incomplete data |
| * * -ENOMEM - Some memory allocation failed along the way |
| */ |
| int zfcp_fsf_exchange_config_data_sync(struct zfcp_qdio *qdio, |
| struct fsf_qtcb_bottom_config *data) |
| { |
| struct zfcp_fsf_req *req = NULL; |
| int retval = -EIO; |
| |
| spin_lock_irq(&qdio->req_q_lock); |
| if (zfcp_qdio_sbal_get(qdio)) |
| goto out_unlock; |
| |
| req = zfcp_fsf_req_create(qdio, FSF_QTCB_EXCHANGE_CONFIG_DATA, |
| SBAL_SFLAGS0_TYPE_READ, NULL); |
| |
| if (IS_ERR(req)) { |
| retval = PTR_ERR(req); |
| goto out_unlock; |
| } |
| |
| zfcp_qdio_set_sbale_last(qdio, &req->qdio_req); |
| req->handler = zfcp_fsf_exchange_config_data_handler; |
| |
| req->qtcb->bottom.config.feature_selection = |
| FSF_FEATURE_NOTIFICATION_LOST | |
| FSF_FEATURE_UPDATE_ALERT | |
| FSF_FEATURE_REQUEST_SFP_DATA | |
| FSF_FEATURE_FC_SECURITY; |
| |
| if (data) |
| req->data = data; |
| |
| zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT); |
| retval = zfcp_fsf_req_send(req); |
| spin_unlock_irq(&qdio->req_q_lock); |
| |
| if (!retval) { |
| /* NOTE: ONLY TOUCH SYNC req AGAIN ON req->completion. */ |
| wait_for_completion(&req->completion); |
| |
| if (req->status & |
| (ZFCP_STATUS_FSFREQ_ERROR | ZFCP_STATUS_FSFREQ_DISMISSED)) |
| retval = -EIO; |
| else if (req->status & ZFCP_STATUS_FSFREQ_XDATAINCOMPLETE) |
| retval = -EAGAIN; |
| } |
| |
| zfcp_fsf_req_free(req); |
| return retval; |
| |
| out_unlock: |
| spin_unlock_irq(&qdio->req_q_lock); |
| return retval; |
| } |
| |
| /** |
| * zfcp_fsf_exchange_port_data - request information about local port |
| * @erp_action: ERP action for the adapter for which port data is requested |
| * Returns: 0 on success, error otherwise |
| */ |
| int zfcp_fsf_exchange_port_data(struct zfcp_erp_action *erp_action) |
| { |
| struct zfcp_qdio *qdio = erp_action->adapter->qdio; |
| struct zfcp_fsf_req *req; |
| int retval = -EIO; |
| |
| if (!(qdio->adapter->adapter_features & FSF_FEATURE_HBAAPI_MANAGEMENT)) |
| return -EOPNOTSUPP; |
| |
| spin_lock_irq(&qdio->req_q_lock); |
| if (zfcp_qdio_sbal_get(qdio)) |
| goto out; |
| |
| req = zfcp_fsf_req_create(qdio, FSF_QTCB_EXCHANGE_PORT_DATA, |
| SBAL_SFLAGS0_TYPE_READ, |
| qdio->adapter->pool.erp_req); |
| |
| if (IS_ERR(req)) { |
| retval = PTR_ERR(req); |
| goto out; |
| } |
| |
| req->status |= ZFCP_STATUS_FSFREQ_CLEANUP; |
| zfcp_qdio_set_sbale_last(qdio, &req->qdio_req); |
| |
| req->handler = zfcp_fsf_exchange_port_data_handler; |
| req->erp_action = erp_action; |
| erp_action->fsf_req_id = req->req_id; |
| |
| zfcp_fsf_start_erp_timer(req); |
| retval = zfcp_fsf_req_send(req); |
| if (retval) { |
| zfcp_fsf_req_free(req); |
| erp_action->fsf_req_id = 0; |
| } |
| /* NOTE: DO NOT TOUCH req PAST THIS POINT! */ |
| out: |
| spin_unlock_irq(&qdio->req_q_lock); |
| return retval; |
| } |
| |
| /** |
| * zfcp_fsf_exchange_port_data_sync() - Request information about local port. |
| * @qdio: pointer to the QDIO-Queue to use for sending the command. |
| * @data: pointer to the QTCB-Bottom for storing the result of the command, |
| * might be %NULL. |
| * |
| * Returns: |
| * * 0 - Exchange Port Data was successful, @data is complete |
| * * -EIO - Exchange Port Data was not successful, @data is invalid |
| * * -EAGAIN - @data contains incomplete data |
| * * -ENOMEM - Some memory allocation failed along the way |
| * * -EOPNOTSUPP - This operation is not supported |
| */ |
| int zfcp_fsf_exchange_port_data_sync(struct zfcp_qdio *qdio, |
| struct fsf_qtcb_bottom_port *data) |
| { |
| struct zfcp_fsf_req *req = NULL; |
| int retval = -EIO; |
| |
| if (!(qdio->adapter->adapter_features & FSF_FEATURE_HBAAPI_MANAGEMENT)) |
| return -EOPNOTSUPP; |
| |
| spin_lock_irq(&qdio->req_q_lock); |
| if (zfcp_qdio_sbal_get(qdio)) |
| goto out_unlock; |
| |
| req = zfcp_fsf_req_create(qdio, FSF_QTCB_EXCHANGE_PORT_DATA, |
| SBAL_SFLAGS0_TYPE_READ, NULL); |
| |
| if (IS_ERR(req)) { |
| retval = PTR_ERR(req); |
| goto out_unlock; |
| } |
| |
| if (data) |
| req->data = data; |
| |
| zfcp_qdio_set_sbale_last(qdio, &req->qdio_req); |
| |
| req->handler = zfcp_fsf_exchange_port_data_handler; |
| zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT); |
| retval = zfcp_fsf_req_send(req); |
| spin_unlock_irq(&qdio->req_q_lock); |
| |
| if (!retval) { |
| /* NOTE: ONLY TOUCH SYNC req AGAIN ON req->completion. */ |
| wait_for_completion(&req->completion); |
| |
| if (req->status & |
| (ZFCP_STATUS_FSFREQ_ERROR | ZFCP_STATUS_FSFREQ_DISMISSED)) |
| retval = -EIO; |
| else if (req->status & ZFCP_STATUS_FSFREQ_XDATAINCOMPLETE) |
| retval = -EAGAIN; |
| } |
| |
| zfcp_fsf_req_free(req); |
| return retval; |
| |
| out_unlock: |
| spin_unlock_irq(&qdio->req_q_lock); |
| return retval; |
| } |
| |
| static void zfcp_fsf_log_port_fc_security(struct zfcp_port *port, |
| struct zfcp_fsf_req *req) |
| { |
| char mnemonic_old[ZFCP_FSF_MAX_FC_SECURITY_MNEMONIC_LENGTH]; |
| char mnemonic_new[ZFCP_FSF_MAX_FC_SECURITY_MNEMONIC_LENGTH]; |
| |
| if (port->connection_info == port->connection_info_old) { |
| /* no change, no log nor trace */ |
| return; |
| } |
| |
| zfcp_dbf_hba_fsf_fces("fsfcesp", req, port->wwpn, |
| port->connection_info_old, |
| port->connection_info); |
| |
| zfcp_fsf_scnprint_fc_security(mnemonic_old, sizeof(mnemonic_old), |
| port->connection_info_old, |
| ZFCP_FSF_PRINT_FMT_SINGLEITEM); |
| zfcp_fsf_scnprint_fc_security(mnemonic_new, sizeof(mnemonic_new), |
| port->connection_info, |
| ZFCP_FSF_PRINT_FMT_SINGLEITEM); |
| |
| if (strncmp(mnemonic_old, mnemonic_new, |
| ZFCP_FSF_MAX_FC_SECURITY_MNEMONIC_LENGTH) == 0) { |
| /* no change in string representation, no log */ |
| goto out; |
| } |
| |
| if (port->connection_info_old == 0) { |
| /* activation */ |
| dev_info(&port->adapter->ccw_device->dev, |
| "FC Endpoint Security of connection to remote port 0x%16llx enabled: %s\n", |
| port->wwpn, mnemonic_new); |
| } else if (port->connection_info == 0) { |
| /* deactivation */ |
| dev_warn(&port->adapter->ccw_device->dev, |
| "FC Endpoint Security of connection to remote port 0x%16llx disabled: was %s\n", |
| port->wwpn, mnemonic_old); |
| } else { |
| /* change */ |
| dev_warn(&port->adapter->ccw_device->dev, |
| "FC Endpoint Security of connection to remote port 0x%16llx changed: from %s to %s\n", |
| port->wwpn, mnemonic_old, mnemonic_new); |
| } |
| |
| out: |
| port->connection_info_old = port->connection_info; |
| } |
| |
| static void zfcp_fsf_log_security_error(const struct device *dev, u32 fsf_sqw0, |
| u64 wwpn) |
| { |
| switch (fsf_sqw0) { |
| |
| /* |
| * Open Port command error codes |
| */ |
| |
| case FSF_SQ_SECURITY_REQUIRED: |
| dev_warn_ratelimited(dev, |
| "FC Endpoint Security error: FC security is required but not supported or configured on remote port 0x%016llx\n", |
| wwpn); |
| break; |
| case FSF_SQ_SECURITY_TIMEOUT: |
| dev_warn_ratelimited(dev, |
| "FC Endpoint Security error: a timeout prevented opening remote port 0x%016llx\n", |
| wwpn); |
| break; |
| case FSF_SQ_SECURITY_KM_UNAVAILABLE: |
| dev_warn_ratelimited(dev, |
| "FC Endpoint Security error: opening remote port 0x%016llx failed because local and external key manager cannot communicate\n", |
| wwpn); |
| break; |
| case FSF_SQ_SECURITY_RKM_UNAVAILABLE: |
| dev_warn_ratelimited(dev, |
| "FC Endpoint Security error: opening remote port 0x%016llx failed because it cannot communicate with the external key manager\n", |
| wwpn); |
| break; |
| case FSF_SQ_SECURITY_AUTH_FAILURE: |
| dev_warn_ratelimited(dev, |
| "FC Endpoint Security error: the device could not verify the identity of remote port 0x%016llx\n", |
| wwpn); |
| break; |
| |
| /* |
| * Send FCP command error codes |
| */ |
| |
| case FSF_SQ_SECURITY_ENC_FAILURE: |
| dev_warn_ratelimited(dev, |
| "FC Endpoint Security error: FC connection to remote port 0x%016llx closed because encryption broke down\n", |
| wwpn); |
| break; |
| |
| /* |
| * Unknown error codes |
| */ |
| |
| default: |
| dev_warn_ratelimited(dev, |
| "FC Endpoint Security error: the device issued an unknown error code 0x%08x related to the FC connection to remote port 0x%016llx\n", |
| fsf_sqw0, wwpn); |
| } |
| } |
| |
| static void zfcp_fsf_open_port_handler(struct zfcp_fsf_req *req) |
| { |
| struct zfcp_adapter *adapter = req->adapter; |
| struct zfcp_port *port = req->data; |
| struct fsf_qtcb_header *header = &req->qtcb->header; |
| struct fsf_qtcb_bottom_support *bottom = &req->qtcb->bottom.support; |
| struct fc_els_flogi *plogi; |
| |
| if (req->status & ZFCP_STATUS_FSFREQ_ERROR) |
| goto out; |
| |
| switch (header->fsf_status) { |
| case FSF_PORT_ALREADY_OPEN: |
| break; |
| case FSF_MAXIMUM_NUMBER_OF_PORTS_EXCEEDED: |
| dev_warn(&adapter->ccw_device->dev, |
| "Not enough FCP adapter resources to open " |
| "remote port 0x%016Lx\n", |
| (unsigned long long)port->wwpn); |
| zfcp_erp_set_port_status(port, |
| ZFCP_STATUS_COMMON_ERP_FAILED); |
| req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
| break; |
| case FSF_SECURITY_ERROR: |
| zfcp_fsf_log_security_error(&req->adapter->ccw_device->dev, |
| header->fsf_status_qual.word[0], |
| port->wwpn); |
| req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
| break; |
| case FSF_ADAPTER_STATUS_AVAILABLE: |
| switch (header->fsf_status_qual.word[0]) { |
| case FSF_SQ_INVOKE_LINK_TEST_PROCEDURE: |
| /* no zfcp_fc_test_link() with failed open port */ |
| fallthrough; |
| case FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED: |
| case FSF_SQ_NO_RETRY_POSSIBLE: |
| req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
| break; |
| } |
| break; |
| case FSF_GOOD: |
| port->handle = header->port_handle; |
| if (adapter->adapter_features & FSF_FEATURE_FC_SECURITY) |
| port->connection_info = bottom->connection_info; |
| else |
| port->connection_info = 0; |
| zfcp_fsf_log_port_fc_security(port, req); |
| atomic_or(ZFCP_STATUS_COMMON_OPEN | |
| ZFCP_STATUS_PORT_PHYS_OPEN, &port->status); |
| atomic_andnot(ZFCP_STATUS_COMMON_ACCESS_BOXED, |
| &port->status); |
| /* check whether D_ID has changed during open */ |
| /* |
| * FIXME: This check is not airtight, as the FCP channel does |
| * not monitor closures of target port connections caused on |
| * the remote side. Thus, they might miss out on invalidating |
| * locally cached WWPNs (and other N_Port parameters) of gone |
| * target ports. So, our heroic attempt to make things safe |
| * could be undermined by 'open port' response data tagged with |
| * obsolete WWPNs. Another reason to monitor potential |
| * connection closures ourself at least (by interpreting |
| * incoming ELS' and unsolicited status). It just crosses my |
| * mind that one should be able to cross-check by means of |
| * another GID_PN straight after a port has been opened. |
| * Alternately, an ADISC/PDISC ELS should suffice, as well. |
| */ |
| plogi = (struct fc_els_flogi *) bottom->els; |
| if (bottom->els1_length >= FSF_PLOGI_MIN_LEN) |
| zfcp_fc_plogi_evaluate(port, plogi); |
| break; |
| case FSF_UNKNOWN_OP_SUBTYPE: |
| req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
| break; |
| } |
| |
| out: |
| put_device(&port->dev); |
| } |
| |
| /** |
| * zfcp_fsf_open_port - create and send open port request |
| * @erp_action: pointer to struct zfcp_erp_action |
| * Returns: 0 on success, error otherwise |
| */ |
| int zfcp_fsf_open_port(struct zfcp_erp_action *erp_action) |
| { |
| struct zfcp_qdio *qdio = erp_action->adapter->qdio; |
| struct zfcp_port *port = erp_action->port; |
| struct zfcp_fsf_req *req; |
| int retval = -EIO; |
| |
| spin_lock_irq(&qdio->req_q_lock); |
| if (zfcp_qdio_sbal_get(qdio)) |
| goto out; |
| |
| req = zfcp_fsf_req_create(qdio, FSF_QTCB_OPEN_PORT_WITH_DID, |
| SBAL_SFLAGS0_TYPE_READ, |
| qdio->adapter->pool.erp_req); |
| |
| if (IS_ERR(req)) { |
| retval = PTR_ERR(req); |
| goto out; |
| } |
| |
| req->status |= ZFCP_STATUS_FSFREQ_CLEANUP; |
| zfcp_qdio_set_sbale_last(qdio, &req->qdio_req); |
| |
| req->handler = zfcp_fsf_open_port_handler; |
| hton24(req->qtcb->bottom.support.d_id, port->d_id); |
| req->data = port; |
| req->erp_action = erp_action; |
| erp_action->fsf_req_id = req->req_id; |
| get_device(&port->dev); |
| |
| zfcp_fsf_start_erp_timer(req); |
| retval = zfcp_fsf_req_send(req); |
| if (retval) { |
| zfcp_fsf_req_free(req); |
| erp_action->fsf_req_id = 0; |
| put_device(&port->dev); |
| } |
| /* NOTE: DO NOT TOUCH req PAST THIS POINT! */ |
| out: |
| spin_unlock_irq(&qdio->req_q_lock); |
| return retval; |
| } |
| |
| static void zfcp_fsf_close_port_handler(struct zfcp_fsf_req *req) |
| { |
| struct zfcp_port *port = req->data; |
| |
| if (req->status & ZFCP_STATUS_FSFREQ_ERROR) |
| return; |
| |
| switch (req->qtcb->header.fsf_status) { |
| case FSF_PORT_HANDLE_NOT_VALID: |
| zfcp_erp_adapter_reopen(port->adapter, 0, "fscph_1"); |
| req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
| break; |
| case FSF_ADAPTER_STATUS_AVAILABLE: |
| break; |
| case FSF_GOOD: |
| zfcp_erp_clear_port_status(port, ZFCP_STATUS_COMMON_OPEN); |
| break; |
| } |
| } |
| |
| /** |
| * zfcp_fsf_close_port - create and send close port request |
| * @erp_action: pointer to struct zfcp_erp_action |
| * Returns: 0 on success, error otherwise |
| */ |
| int zfcp_fsf_close_port(struct zfcp_erp_action *erp_action) |
| { |
| struct zfcp_qdio *qdio = erp_action->adapter->qdio; |
| struct zfcp_fsf_req *req; |
| int retval = -EIO; |
| |
| spin_lock_irq(&qdio->req_q_lock); |
| if (zfcp_qdio_sbal_get(qdio)) |
| goto out; |
| |
| req = zfcp_fsf_req_create(qdio, FSF_QTCB_CLOSE_PORT, |
| SBAL_SFLAGS0_TYPE_READ, |
| qdio->adapter->pool.erp_req); |
| |
| if (IS_ERR(req)) { |
| retval = PTR_ERR(req); |
| goto out; |
| } |
| |
| req->status |= ZFCP_STATUS_FSFREQ_CLEANUP; |
| zfcp_qdio_set_sbale_last(qdio, &req->qdio_req); |
| |
| req->handler = zfcp_fsf_close_port_handler; |
| req->data = erp_action->port; |
| req->erp_action = erp_action; |
| req->qtcb->header.port_handle = erp_action->port->handle; |
| erp_action->fsf_req_id = req->req_id; |
| |
| zfcp_fsf_start_erp_timer(req); |
| retval = zfcp_fsf_req_send(req); |
| if (retval) { |
| zfcp_fsf_req_free(req); |
| erp_action->fsf_req_id = 0; |
| } |
| /* NOTE: DO NOT TOUCH req PAST THIS POINT! */ |
| out: |
| spin_unlock_irq(&qdio->req_q_lock); |
| return retval; |
| } |
| |
| static void zfcp_fsf_open_wka_port_handler(struct zfcp_fsf_req *req) |
| { |
| struct zfcp_fc_wka_port *wka_port = req->data; |
| struct fsf_qtcb_header *header = &req->qtcb->header; |
| |
| if (req->status & ZFCP_STATUS_FSFREQ_ERROR) { |
| wka_port->status = ZFCP_FC_WKA_PORT_OFFLINE; |
| goto out; |
| } |
| |
| switch (header->fsf_status) { |
| case FSF_MAXIMUM_NUMBER_OF_PORTS_EXCEEDED: |
| dev_warn(&req->adapter->ccw_device->dev, |
| "Opening WKA port 0x%x failed\n", wka_port->d_id); |
| fallthrough; |
| case FSF_ADAPTER_STATUS_AVAILABLE: |
| req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
| wka_port->status = ZFCP_FC_WKA_PORT_OFFLINE; |
| break; |
| case FSF_GOOD: |
| wka_port->handle = header->port_handle; |
| fallthrough; |
| case FSF_PORT_ALREADY_OPEN: |
| wka_port->status = ZFCP_FC_WKA_PORT_ONLINE; |
| } |
| out: |
| wake_up(&wka_port->opened); |
| } |
| |
| /** |
| * zfcp_fsf_open_wka_port - create and send open wka-port request |
| * @wka_port: pointer to struct zfcp_fc_wka_port |
| * Returns: 0 on success, error otherwise |
| */ |
| int zfcp_fsf_open_wka_port(struct zfcp_fc_wka_port *wka_port) |
| { |
| struct zfcp_qdio *qdio = wka_port->adapter->qdio; |
| struct zfcp_fsf_req *req; |
| unsigned long req_id = 0; |
| int retval = -EIO; |
| |
| spin_lock_irq(&qdio->req_q_lock); |
| if (zfcp_qdio_sbal_get(qdio)) |
| goto out; |
| |
| req = zfcp_fsf_req_create(qdio, FSF_QTCB_OPEN_PORT_WITH_DID, |
| SBAL_SFLAGS0_TYPE_READ, |
| qdio->adapter->pool.erp_req); |
| |
| if (IS_ERR(req)) { |
| retval = PTR_ERR(req); |
| goto out; |
| } |
| |
| req->status |= ZFCP_STATUS_FSFREQ_CLEANUP; |
| zfcp_qdio_set_sbale_last(qdio, &req->qdio_req); |
| |
| req->handler = zfcp_fsf_open_wka_port_handler; |
| hton24(req->qtcb->bottom.support.d_id, wka_port->d_id); |
| req->data = wka_port; |
| |
| req_id = req->req_id; |
| |
| zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT); |
| retval = zfcp_fsf_req_send(req); |
| if (retval) |
| zfcp_fsf_req_free(req); |
| /* NOTE: DO NOT TOUCH req PAST THIS POINT! */ |
| out: |
| spin_unlock_irq(&qdio->req_q_lock); |
| if (!retval) |
| zfcp_dbf_rec_run_wka("fsowp_1", wka_port, req_id); |
| return retval; |
| } |
| |
| static void zfcp_fsf_close_wka_port_handler(struct zfcp_fsf_req *req) |
| { |
| struct zfcp_fc_wka_port *wka_port = req->data; |
| |
| if (req->qtcb->header.fsf_status == FSF_PORT_HANDLE_NOT_VALID) { |
| req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
| zfcp_erp_adapter_reopen(wka_port->adapter, 0, "fscwph1"); |
| } |
| |
| wka_port->status = ZFCP_FC_WKA_PORT_OFFLINE; |
| wake_up(&wka_port->closed); |
| } |
| |
| /** |
| * zfcp_fsf_close_wka_port - create and send close wka port request |
| * @wka_port: WKA port to open |
| * Returns: 0 on success, error otherwise |
| */ |
| int zfcp_fsf_close_wka_port(struct zfcp_fc_wka_port *wka_port) |
| { |
| struct zfcp_qdio *qdio = wka_port->adapter->qdio; |
| struct zfcp_fsf_req *req; |
| unsigned long req_id = 0; |
| int retval = -EIO; |
| |
| spin_lock_irq(&qdio->req_q_lock); |
| if (zfcp_qdio_sbal_get(qdio)) |
| goto out; |
| |
| req = zfcp_fsf_req_create(qdio, FSF_QTCB_CLOSE_PORT, |
| SBAL_SFLAGS0_TYPE_READ, |
| qdio->adapter->pool.erp_req); |
| |
| if (IS_ERR(req)) { |
| retval = PTR_ERR(req); |
| goto out; |
| } |
| |
| req->status |= ZFCP_STATUS_FSFREQ_CLEANUP; |
| zfcp_qdio_set_sbale_last(qdio, &req->qdio_req); |
| |
| req->handler = zfcp_fsf_close_wka_port_handler; |
| req->data = wka_port; |
| req->qtcb->header.port_handle = wka_port->handle; |
| |
| req_id = req->req_id; |
| |
| zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT); |
| retval = zfcp_fsf_req_send(req); |
| if (retval) |
| zfcp_fsf_req_free(req); |
| /* NOTE: DO NOT TOUCH req PAST THIS POINT! */ |
| out: |
| spin_unlock_irq(&qdio->req_q_lock); |
| if (!retval) |
| zfcp_dbf_rec_run_wka("fscwp_1", wka_port, req_id); |
| return retval; |
| } |
| |
| static void zfcp_fsf_close_physical_port_handler(struct zfcp_fsf_req *req) |
| { |
| struct zfcp_port *port = req->data; |
| struct fsf_qtcb_header *header = &req->qtcb->header; |
| struct scsi_device *sdev; |
| |
| if (req->status & ZFCP_STATUS_FSFREQ_ERROR) |
| return; |
| |
| switch (header->fsf_status) { |
| case FSF_PORT_HANDLE_NOT_VALID: |
| zfcp_erp_adapter_reopen(port->adapter, 0, "fscpph1"); |
| req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
| break; |
| case FSF_PORT_BOXED: |
| /* can't use generic zfcp_erp_modify_port_status because |
| * ZFCP_STATUS_COMMON_OPEN must not be reset for the port */ |
| atomic_andnot(ZFCP_STATUS_PORT_PHYS_OPEN, &port->status); |
| shost_for_each_device(sdev, port->adapter->scsi_host) |
| if (sdev_to_zfcp(sdev)->port == port) |
| atomic_andnot(ZFCP_STATUS_COMMON_OPEN, |
| &sdev_to_zfcp(sdev)->status); |
| zfcp_erp_set_port_status(port, ZFCP_STATUS_COMMON_ACCESS_BOXED); |
| zfcp_erp_port_reopen(port, ZFCP_STATUS_COMMON_ERP_FAILED, |
| "fscpph2"); |
| req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
| break; |
| case FSF_ADAPTER_STATUS_AVAILABLE: |
| switch (header->fsf_status_qual.word[0]) { |
| case FSF_SQ_INVOKE_LINK_TEST_PROCEDURE: |
| case FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED: |
| req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
| break; |
| } |
| break; |
| case FSF_GOOD: |
| /* can't use generic zfcp_erp_modify_port_status because |
| * ZFCP_STATUS_COMMON_OPEN must not be reset for the port |
| */ |
| atomic_andnot(ZFCP_STATUS_PORT_PHYS_OPEN, &port->status); |
| shost_for_each_device(sdev, port->adapter->scsi_host) |
| if (sdev_to_zfcp(sdev)->port == port) |
| atomic_andnot(ZFCP_STATUS_COMMON_OPEN, |
| &sdev_to_zfcp(sdev)->status); |
| break; |
| } |
| } |
| |
| /** |
| * zfcp_fsf_close_physical_port - close physical port |
| * @erp_action: pointer to struct zfcp_erp_action |
| * Returns: 0 on success |
| */ |
| int zfcp_fsf_close_physical_port(struct zfcp_erp_action *erp_action) |
| { |
| struct zfcp_qdio *qdio = erp_action->adapter->qdio; |
| struct zfcp_fsf_req *req; |
| int retval = -EIO; |
| |
| spin_lock_irq(&qdio->req_q_lock); |
| if (zfcp_qdio_sbal_get(qdio)) |
| goto out; |
| |
| req = zfcp_fsf_req_create(qdio, FSF_QTCB_CLOSE_PHYSICAL_PORT, |
| SBAL_SFLAGS0_TYPE_READ, |
| qdio->adapter->pool.erp_req); |
| |
| if (IS_ERR(req)) { |
| retval = PTR_ERR(req); |
| goto out; |
| } |
| |
| req->status |= ZFCP_STATUS_FSFREQ_CLEANUP; |
| zfcp_qdio_set_sbale_last(qdio, &req->qdio_req); |
| |
| req->data = erp_action->port; |
| req->qtcb->header.port_handle = erp_action->port->handle; |
| req->erp_action = erp_action; |
| req->handler = zfcp_fsf_close_physical_port_handler; |
| erp_action->fsf_req_id = req->req_id; |
| |
| zfcp_fsf_start_erp_timer(req); |
| retval = zfcp_fsf_req_send(req); |
| if (retval) { |
| zfcp_fsf_req_free(req); |
| erp_action->fsf_req_id = 0; |
| } |
| /* NOTE: DO NOT TOUCH req PAST THIS POINT! */ |
| out: |
| spin_unlock_irq(&qdio->req_q_lock); |
| return retval; |
| } |
| |
| static void zfcp_fsf_open_lun_handler(struct zfcp_fsf_req *req) |
| { |
| struct zfcp_adapter *adapter = req->adapter; |
| struct scsi_device *sdev = req->data; |
| struct zfcp_scsi_dev *zfcp_sdev; |
| struct fsf_qtcb_header *header = &req->qtcb->header; |
| union fsf_status_qual *qual = &header->fsf_status_qual; |
| |
| if (req->status & ZFCP_STATUS_FSFREQ_ERROR) |
| return; |
| |
| zfcp_sdev = sdev_to_zfcp(sdev); |
| |
| atomic_andnot(ZFCP_STATUS_COMMON_ACCESS_DENIED | |
| ZFCP_STATUS_COMMON_ACCESS_BOXED, |
| &zfcp_sdev->status); |
| |
| switch (header->fsf_status) { |
| |
| case FSF_PORT_HANDLE_NOT_VALID: |
| zfcp_erp_adapter_reopen(adapter, 0, "fsouh_1"); |
| fallthrough; |
| case FSF_LUN_ALREADY_OPEN: |
| break; |
| case FSF_PORT_BOXED: |
| zfcp_erp_set_port_status(zfcp_sdev->port, |
| ZFCP_STATUS_COMMON_ACCESS_BOXED); |
| zfcp_erp_port_reopen(zfcp_sdev->port, |
| ZFCP_STATUS_COMMON_ERP_FAILED, "fsouh_2"); |
| req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
| break; |
| case FSF_LUN_SHARING_VIOLATION: |
| if (qual->word[0]) |
| dev_warn(&zfcp_sdev->port->adapter->ccw_device->dev, |
| "LUN 0x%016Lx on port 0x%016Lx is already in " |
| "use by CSS%d, MIF Image ID %x\n", |
| zfcp_scsi_dev_lun(sdev), |
| (unsigned long long)zfcp_sdev->port->wwpn, |
| qual->fsf_queue_designator.cssid, |
| qual->fsf_queue_designator.hla); |
| zfcp_erp_set_lun_status(sdev, |
| ZFCP_STATUS_COMMON_ERP_FAILED | |
| ZFCP_STATUS_COMMON_ACCESS_DENIED); |
| req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
| break; |
| case FSF_MAXIMUM_NUMBER_OF_LUNS_EXCEEDED: |
| dev_warn(&adapter->ccw_device->dev, |
| "No handle is available for LUN " |
| "0x%016Lx on port 0x%016Lx\n", |
| (unsigned long long)zfcp_scsi_dev_lun(sdev), |
| (unsigned long long)zfcp_sdev->port->wwpn); |
| zfcp_erp_set_lun_status(sdev, ZFCP_STATUS_COMMON_ERP_FAILED); |
| fallthrough; |
| case FSF_INVALID_COMMAND_OPTION: |
| req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
| break; |
| case FSF_ADAPTER_STATUS_AVAILABLE: |
| switch (header->fsf_status_qual.word[0]) { |
| case FSF_SQ_INVOKE_LINK_TEST_PROCEDURE: |
| zfcp_fc_test_link(zfcp_sdev->port); |
| fallthrough; |
| case FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED: |
| req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
| break; |
| } |
| break; |
| |
| case FSF_GOOD: |
| zfcp_sdev->lun_handle = header->lun_handle; |
| atomic_or(ZFCP_STATUS_COMMON_OPEN, &zfcp_sdev->status); |
| break; |
| } |
| } |
| |
| /** |
| * zfcp_fsf_open_lun - open LUN |
| * @erp_action: pointer to struct zfcp_erp_action |
| * Returns: 0 on success, error otherwise |
| */ |
| int zfcp_fsf_open_lun(struct zfcp_erp_action *erp_action) |
| { |
| struct zfcp_adapter *adapter = erp_action->adapter; |
| struct zfcp_qdio *qdio = adapter->qdio; |
| struct zfcp_fsf_req *req; |
| int retval = -EIO; |
| |
| spin_lock_irq(&qdio->req_q_lock); |
| if (zfcp_qdio_sbal_get(qdio)) |
| goto out; |
| |
| req = zfcp_fsf_req_create(qdio, FSF_QTCB_OPEN_LUN, |
| SBAL_SFLAGS0_TYPE_READ, |
| adapter->pool.erp_req); |
| |
| if (IS_ERR(req)) { |
| retval = PTR_ERR(req); |
| goto out; |
| } |
| |
| req->status |= ZFCP_STATUS_FSFREQ_CLEANUP; |
| zfcp_qdio_set_sbale_last(qdio, &req->qdio_req); |
| |
| req->qtcb->header.port_handle = erp_action->port->handle; |
| req->qtcb->bottom.support.fcp_lun = zfcp_scsi_dev_lun(erp_action->sdev); |
| req->handler = zfcp_fsf_open_lun_handler; |
| req->data = erp_action->sdev; |
| req->erp_action = erp_action; |
| erp_action->fsf_req_id = req->req_id; |
| |
| if (!(adapter->connection_features & FSF_FEATURE_NPIV_MODE)) |
| req->qtcb->bottom.support.option = FSF_OPEN_LUN_SUPPRESS_BOXING; |
| |
| zfcp_fsf_start_erp_timer(req); |
| retval = zfcp_fsf_req_send(req); |
| if (retval) { |
| zfcp_fsf_req_free(req); |
| erp_action->fsf_req_id = 0; |
| } |
| /* NOTE: DO NOT TOUCH req PAST THIS POINT! */ |
| out: |
| spin_unlock_irq(&qdio->req_q_lock); |
| return retval; |
| } |
| |
| static void zfcp_fsf_close_lun_handler(struct zfcp_fsf_req *req) |
| { |
| struct scsi_device *sdev = req->data; |
| struct zfcp_scsi_dev *zfcp_sdev; |
| |
| if (req->status & ZFCP_STATUS_FSFREQ_ERROR) |
| return; |
| |
| zfcp_sdev = sdev_to_zfcp(sdev); |
| |
| switch (req->qtcb->header.fsf_status) { |
| case FSF_PORT_HANDLE_NOT_VALID: |
| zfcp_erp_adapter_reopen(zfcp_sdev->port->adapter, 0, "fscuh_1"); |
| req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
| break; |
| case FSF_LUN_HANDLE_NOT_VALID: |
| zfcp_erp_port_reopen(zfcp_sdev->port, 0, "fscuh_2"); |
| req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
| break; |
| case FSF_PORT_BOXED: |
| zfcp_erp_set_port_status(zfcp_sdev->port, |
| ZFCP_STATUS_COMMON_ACCESS_BOXED); |
| zfcp_erp_port_reopen(zfcp_sdev->port, |
| ZFCP_STATUS_COMMON_ERP_FAILED, "fscuh_3"); |
| req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
| break; |
| case FSF_ADAPTER_STATUS_AVAILABLE: |
| switch (req->qtcb->header.fsf_status_qual.word[0]) { |
| case FSF_SQ_INVOKE_LINK_TEST_PROCEDURE: |
| zfcp_fc_test_link(zfcp_sdev->port); |
| fallthrough; |
| case FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED: |
| req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
| break; |
| } |
| break; |
| case FSF_GOOD: |
| atomic_andnot(ZFCP_STATUS_COMMON_OPEN, &zfcp_sdev->status); |
| break; |
| } |
| } |
| |
| /** |
| * zfcp_fsf_close_lun - close LUN |
| * @erp_action: pointer to erp_action triggering the "close LUN" |
| * Returns: 0 on success, error otherwise |
| */ |
| int zfcp_fsf_close_lun(struct zfcp_erp_action *erp_action) |
| { |
| struct zfcp_qdio *qdio = erp_action->adapter->qdio; |
| struct zfcp_scsi_dev *zfcp_sdev = sdev_to_zfcp(erp_action->sdev); |
| struct zfcp_fsf_req *req; |
| int retval = -EIO; |
| |
| spin_lock_irq(&qdio->req_q_lock); |
| if (zfcp_qdio_sbal_get(qdio)) |
| goto out; |
| |
| req = zfcp_fsf_req_create(qdio, FSF_QTCB_CLOSE_LUN, |
| SBAL_SFLAGS0_TYPE_READ, |
| qdio->adapter->pool.erp_req); |
| |
| if (IS_ERR(req)) { |
| retval = PTR_ERR(req); |
| goto out; |
| } |
| |
| req->status |= ZFCP_STATUS_FSFREQ_CLEANUP; |
| zfcp_qdio_set_sbale_last(qdio, &req->qdio_req); |
| |
| req->qtcb->header.port_handle = erp_action->port->handle; |
| req->qtcb->header.lun_handle = zfcp_sdev->lun_handle; |
| req->handler = zfcp_fsf_close_lun_handler; |
| req->data = erp_action->sdev; |
| req->erp_action = erp_action; |
| erp_action->fsf_req_id = req->req_id; |
| |
| zfcp_fsf_start_erp_timer(req); |
| retval = zfcp_fsf_req_send(req); |
| if (retval) { |
| zfcp_fsf_req_free(req); |
| erp_action->fsf_req_id = 0; |
| } |
| /* NOTE: DO NOT TOUCH req PAST THIS POINT! */ |
| out: |
| spin_unlock_irq(&qdio->req_q_lock); |
| return retval; |
| } |
| |
| static void zfcp_fsf_update_lat(struct zfcp_latency_record *lat_rec, u32 lat) |
| { |
| lat_rec->sum += lat; |
| lat_rec->min = min(lat_rec->min, lat); |
| lat_rec->max = max(lat_rec->max, lat); |
| } |
| |
| static void zfcp_fsf_req_trace(struct zfcp_fsf_req *req, struct scsi_cmnd *scsi) |
| { |
| struct fsf_qual_latency_info *lat_in; |
| struct zfcp_latency_cont *lat = NULL; |
| struct zfcp_scsi_dev *zfcp_sdev; |
| struct zfcp_blk_drv_data blktrc; |
| int ticks = req->adapter->timer_ticks; |
| |
| lat_in = &req->qtcb->prefix.prot_status_qual.latency_info; |
| |
| blktrc.flags = 0; |
| blktrc.magic = ZFCP_BLK_DRV_DATA_MAGIC; |
| if (req->status & ZFCP_STATUS_FSFREQ_ERROR) |
| blktrc.flags |= ZFCP_BLK_REQ_ERROR; |
| blktrc.inb_usage = 0; |
| blktrc.outb_usage = req->qdio_req.qdio_outb_usage; |
| |
| if (req->adapter->adapter_features & FSF_FEATURE_MEASUREMENT_DATA && |
| !(req->status & ZFCP_STATUS_FSFREQ_ERROR)) { |
| zfcp_sdev = sdev_to_zfcp(scsi->device); |
| blktrc.flags |= ZFCP_BLK_LAT_VALID; |
| blktrc.channel_lat = lat_in->channel_lat * ticks; |
| blktrc.fabric_lat = lat_in->fabric_lat * ticks; |
| |
| switch (req->qtcb->bottom.io.data_direction) { |
| case FSF_DATADIR_DIF_READ_STRIP: |
| case FSF_DATADIR_DIF_READ_CONVERT: |
| case FSF_DATADIR_READ: |
| lat = &zfcp_sdev->latencies.read; |
| break; |
| case FSF_DATADIR_DIF_WRITE_INSERT: |
| case FSF_DATADIR_DIF_WRITE_CONVERT: |
| case FSF_DATADIR_WRITE: |
| lat = &zfcp_sdev->latencies.write; |
| break; |
| case FSF_DATADIR_CMND: |
| lat = &zfcp_sdev->latencies.cmd; |
| break; |
| } |
| |
| if (lat) { |
| spin_lock(&zfcp_sdev->latencies.lock); |
| zfcp_fsf_update_lat(&lat->channel, lat_in->channel_lat); |
| zfcp_fsf_update_lat(&lat->fabric, lat_in->fabric_lat); |
| lat->counter++; |
| spin_unlock(&zfcp_sdev->latencies.lock); |
| } |
| } |
| |
| blk_add_driver_data(scsi_cmd_to_rq(scsi), &blktrc, sizeof(blktrc)); |
| } |
| |
| /** |
| * zfcp_fsf_fcp_handler_common() - FCP response handler common to I/O and TMF. |
| * @req: Pointer to FSF request. |
| * @sdev: Pointer to SCSI device as request context. |
| */ |
| static void zfcp_fsf_fcp_handler_common(struct zfcp_fsf_req *req, |
| struct scsi_device *sdev) |
| { |
| struct zfcp_scsi_dev *zfcp_sdev; |
| struct fsf_qtcb_header *header = &req->qtcb->header; |
| |
| if (unlikely(req->status & ZFCP_STATUS_FSFREQ_ERROR)) |
| return; |
| |
| zfcp_sdev = sdev_to_zfcp(sdev); |
| |
| switch (header->fsf_status) { |
| case FSF_HANDLE_MISMATCH: |
| case FSF_PORT_HANDLE_NOT_VALID: |
| zfcp_erp_adapter_reopen(req->adapter, 0, "fssfch1"); |
| req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
| break; |
| case FSF_FCPLUN_NOT_VALID: |
| case FSF_LUN_HANDLE_NOT_VALID: |
| zfcp_erp_port_reopen(zfcp_sdev->port, 0, "fssfch2"); |
| req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
| break; |
| case FSF_SERVICE_CLASS_NOT_SUPPORTED: |
| zfcp_fsf_class_not_supp(req); |
| break; |
| case FSF_DIRECTION_INDICATOR_NOT_VALID: |
| dev_err(&req->adapter->ccw_device->dev, |
| "Incorrect direction %d, LUN 0x%016Lx on port " |
| "0x%016Lx closed\n", |
| req->qtcb->bottom.io.data_direction, |
| (unsigned long long)zfcp_scsi_dev_lun(sdev), |
| (unsigned long long)zfcp_sdev->port->wwpn); |
| zfcp_erp_adapter_shutdown(req->adapter, 0, "fssfch3"); |
| req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
| break; |
| case FSF_CMND_LENGTH_NOT_VALID: |
| dev_err(&req->adapter->ccw_device->dev, |
| "Incorrect FCP_CMND length %d, FCP device closed\n", |
| req->qtcb->bottom.io.fcp_cmnd_length); |
| zfcp_erp_adapter_shutdown(req->adapter, 0, "fssfch4"); |
| req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
| break; |
| case FSF_PORT_BOXED: |
| zfcp_erp_set_port_status(zfcp_sdev->port, |
| ZFCP_STATUS_COMMON_ACCESS_BOXED); |
| zfcp_erp_port_reopen(zfcp_sdev->port, |
| ZFCP_STATUS_COMMON_ERP_FAILED, "fssfch5"); |
| req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
| break; |
| case FSF_LUN_BOXED: |
| zfcp_erp_set_lun_status(sdev, ZFCP_STATUS_COMMON_ACCESS_BOXED); |
| zfcp_erp_lun_reopen(sdev, ZFCP_STATUS_COMMON_ERP_FAILED, |
| "fssfch6"); |
| req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
| break; |
| case FSF_ADAPTER_STATUS_AVAILABLE: |
| if (header->fsf_status_qual.word[0] == |
| FSF_SQ_INVOKE_LINK_TEST_PROCEDURE) |
| zfcp_fc_test_link(zfcp_sdev->port); |
| req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
| break; |
| case FSF_SECURITY_ERROR: |
| zfcp_fsf_log_security_error(&req->adapter->ccw_device->dev, |
| header->fsf_status_qual.word[0], |
| zfcp_sdev->port->wwpn); |
| zfcp_erp_port_forced_reopen(zfcp_sdev->port, 0, "fssfch7"); |
| req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
| break; |
| } |
| } |
| |
| static void zfcp_fsf_fcp_cmnd_handler(struct zfcp_fsf_req *req) |
| { |
| struct scsi_cmnd *scpnt; |
| struct fcp_resp_with_ext *fcp_rsp; |
| unsigned long flags; |
| |
| read_lock_irqsave(&req->adapter->abort_lock, flags); |
| |
| scpnt = req->data; |
| if (unlikely(!scpnt)) { |
| read_unlock_irqrestore(&req->adapter->abort_lock, flags); |
| return; |
| } |
| |
| zfcp_fsf_fcp_handler_common(req, scpnt->device); |
| |
| if (unlikely(req->status & ZFCP_STATUS_FSFREQ_ERROR)) { |
| set_host_byte(scpnt, DID_TRANSPORT_DISRUPTED); |
| goto skip_fsfstatus; |
| } |
| |
| switch (req->qtcb->header.fsf_status) { |
| case FSF_INCONSISTENT_PROT_DATA: |
| case FSF_INVALID_PROT_PARM: |
| set_host_byte(scpnt, DID_ERROR); |
| goto skip_fsfstatus; |
| case FSF_BLOCK_GUARD_CHECK_FAILURE: |
| zfcp_scsi_dif_sense_error(scpnt, 0x1); |
| goto skip_fsfstatus; |
| case FSF_APP_TAG_CHECK_FAILURE: |
| zfcp_scsi_dif_sense_error(scpnt, 0x2); |
| goto skip_fsfstatus; |
| case FSF_REF_TAG_CHECK_FAILURE: |
| zfcp_scsi_dif_sense_error(scpnt, 0x3); |
| goto skip_fsfstatus; |
| } |
| BUILD_BUG_ON(sizeof(struct fcp_resp_with_ext) > FSF_FCP_RSP_SIZE); |
| fcp_rsp = &req->qtcb->bottom.io.fcp_rsp.iu; |
| zfcp_fc_eval_fcp_rsp(fcp_rsp, scpnt); |
| |
| skip_fsfstatus: |
| zfcp_fsf_req_trace(req, scpnt); |
| zfcp_dbf_scsi_result(scpnt, req); |
| |
| scpnt->host_scribble = NULL; |
| scsi_done(scpnt); |
| /* |
| * We must hold this lock until scsi_done has been called. |
| * Otherwise we may call scsi_done after abort regarding this |
| * command has completed. |
| * Note: scsi_done must not block! |
| */ |
| read_unlock_irqrestore(&req->adapter->abort_lock, flags); |
| } |
| |
| static int zfcp_fsf_set_data_dir(struct scsi_cmnd *scsi_cmnd, u32 *data_dir) |
| { |
| switch (scsi_get_prot_op(scsi_cmnd)) { |
| case SCSI_PROT_NORMAL: |
| switch (scsi_cmnd->sc_data_direction) { |
| case DMA_NONE: |
| *data_dir = FSF_DATADIR_CMND; |
| break; |
| case DMA_FROM_DEVICE: |
| *data_dir = FSF_DATADIR_READ; |
| break; |
| case DMA_TO_DEVICE: |
| *data_dir = FSF_DATADIR_WRITE; |
| break; |
| case DMA_BIDIRECTIONAL: |
| return -EINVAL; |
| } |
| break; |
| |
| case SCSI_PROT_READ_STRIP: |
| *data_dir = FSF_DATADIR_DIF_READ_STRIP; |
| break; |
| case SCSI_PROT_WRITE_INSERT: |
| *data_dir = FSF_DATADIR_DIF_WRITE_INSERT; |
| break; |
| case SCSI_PROT_READ_PASS: |
| *data_dir = FSF_DATADIR_DIF_READ_CONVERT; |
| break; |
| case SCSI_PROT_WRITE_PASS: |
| *data_dir = FSF_DATADIR_DIF_WRITE_CONVERT; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * zfcp_fsf_fcp_cmnd - initiate an FCP command (for a SCSI command) |
| * @scsi_cmnd: scsi command to be sent |
| */ |
| int zfcp_fsf_fcp_cmnd(struct scsi_cmnd *scsi_cmnd) |
| { |
| struct zfcp_fsf_req *req; |
| struct fcp_cmnd *fcp_cmnd; |
| u8 sbtype = SBAL_SFLAGS0_TYPE_READ; |
| int retval = -EIO; |
| struct scsi_device *sdev = scsi_cmnd->device; |
| struct zfcp_scsi_dev *zfcp_sdev = sdev_to_zfcp(sdev); |
| struct zfcp_adapter *adapter = zfcp_sdev->port->adapter; |
| struct zfcp_qdio *qdio = adapter->qdio; |
| struct fsf_qtcb_bottom_io *io; |
| unsigned long flags; |
| |
| if (unlikely(!(atomic_read(&zfcp_sdev->status) & |
| ZFCP_STATUS_COMMON_UNBLOCKED))) |
| return -EBUSY; |
| |
| spin_lock_irqsave(&qdio->req_q_lock, flags); |
| if (atomic_read(&qdio->req_q_free) <= 0) { |
| atomic_inc(&qdio->req_q_full); |
| goto out; |
| } |
| |
| if (scsi_cmnd->sc_data_direction == DMA_TO_DEVICE) |
| sbtype = SBAL_SFLAGS0_TYPE_WRITE; |
| |
| req = zfcp_fsf_req_create(qdio, FSF_QTCB_FCP_CMND, |
| sbtype, adapter->pool.scsi_req); |
| |
| if (IS_ERR(req)) { |
| retval = PTR_ERR(req); |
| goto out; |
| } |
| |
| scsi_cmnd->host_scribble = (unsigned char *) req->req_id; |
| |
| io = &req->qtcb->bottom.io; |
| req->status |= ZFCP_STATUS_FSFREQ_CLEANUP; |
| req->data = scsi_cmnd; |
| req->handler = zfcp_fsf_fcp_cmnd_handler; |
| req->qtcb->header.lun_handle = zfcp_sdev->lun_handle; |
| req->qtcb->header.port_handle = zfcp_sdev->port->handle; |
| io->service_class = FSF_CLASS_3; |
| io->fcp_cmnd_length = FCP_CMND_LEN; |
| |
| if (scsi_get_prot_op(scsi_cmnd) != SCSI_PROT_NORMAL) { |
| io->data_block_length = scsi_prot_interval(scsi_cmnd); |
| io->ref_tag_value = scsi_prot_ref_tag(scsi_cmnd); |
| } |
| |
| if (zfcp_fsf_set_data_dir(scsi_cmnd, &io->data_direction)) |
| goto failed_scsi_cmnd; |
| |
| BUILD_BUG_ON(sizeof(struct fcp_cmnd) > FSF_FCP_CMND_SIZE); |
| fcp_cmnd = &req->qtcb->bottom.io.fcp_cmnd.iu; |
| zfcp_fc_scsi_to_fcp(fcp_cmnd, scsi_cmnd); |
| |
| if ((scsi_get_prot_op(scsi_cmnd) != SCSI_PROT_NORMAL) && |
| scsi_prot_sg_count(scsi_cmnd)) { |
| zfcp_qdio_set_data_div(qdio, &req->qdio_req, |
| scsi_prot_sg_count(scsi_cmnd)); |
| retval = zfcp_qdio_sbals_from_sg(qdio, &req->qdio_req, |
| scsi_prot_sglist(scsi_cmnd)); |
| if (retval) |
| goto failed_scsi_cmnd; |
| io->prot_data_length = zfcp_qdio_real_bytes( |
| scsi_prot_sglist(scsi_cmnd)); |
| } |
| |
| retval = zfcp_qdio_sbals_from_sg(qdio, &req->qdio_req, |
| scsi_sglist(scsi_cmnd)); |
| if (unlikely(retval)) |
| goto failed_scsi_cmnd; |
| |
| zfcp_qdio_set_sbale_last(adapter->qdio, &req->qdio_req); |
| if (zfcp_adapter_multi_buffer_active(adapter)) |
| zfcp_qdio_set_scount(qdio, &req->qdio_req); |
| |
| retval = zfcp_fsf_req_send(req); |
| if (unlikely(retval)) |
| goto failed_scsi_cmnd; |
| /* NOTE: DO NOT TOUCH req PAST THIS POINT! */ |
| |
| goto out; |
| |
| failed_scsi_cmnd: |
| zfcp_fsf_req_free(req); |
| scsi_cmnd->host_scribble = NULL; |
| out: |
| spin_unlock_irqrestore(&qdio->req_q_lock, flags); |
| return retval; |
| } |
| |
| static void zfcp_fsf_fcp_task_mgmt_handler(struct zfcp_fsf_req *req) |
| { |
| struct scsi_device *sdev = req->data; |
| struct fcp_resp_with_ext *fcp_rsp; |
| struct fcp_resp_rsp_info *rsp_info; |
| |
| zfcp_fsf_fcp_handler_common(req, sdev); |
| |
| fcp_rsp = &req->qtcb->bottom.io.fcp_rsp.iu; |
| rsp_info = (struct fcp_resp_rsp_info *) &fcp_rsp[1]; |
| |
| if ((rsp_info->rsp_code != FCP_TMF_CMPL) || |
| (req->status & ZFCP_STATUS_FSFREQ_ERROR)) |
| req->status |= ZFCP_STATUS_FSFREQ_TMFUNCFAILED; |
| } |
| |
| /** |
| * zfcp_fsf_fcp_task_mgmt() - Send SCSI task management command (TMF). |
| * @sdev: Pointer to SCSI device to send the task management command to. |
| * @tm_flags: Unsigned byte for task management flags. |
| * |
| * Return: On success pointer to struct zfcp_fsf_req, %NULL otherwise. |
| */ |
| struct zfcp_fsf_req *zfcp_fsf_fcp_task_mgmt(struct scsi_device *sdev, |
| u8 tm_flags) |
| { |
| struct zfcp_fsf_req *req = NULL; |
| struct fcp_cmnd *fcp_cmnd; |
| struct zfcp_scsi_dev *zfcp_sdev = sdev_to_zfcp(sdev); |
| struct zfcp_qdio *qdio = zfcp_sdev->port->adapter->qdio; |
| |
| if (unlikely(!(atomic_read(&zfcp_sdev->status) & |
| ZFCP_STATUS_COMMON_UNBLOCKED))) |
| return NULL; |
| |
| spin_lock_irq(&qdio->req_q_lock); |
| if (zfcp_qdio_sbal_get(qdio)) |
| goto out; |
| |
| req = zfcp_fsf_req_create(qdio, FSF_QTCB_FCP_CMND, |
| SBAL_SFLAGS0_TYPE_WRITE, |
| qdio->adapter->pool.scsi_req); |
| |
| if (IS_ERR(req)) { |
| req = NULL; |
| goto out; |
| } |
| |
| req->data = sdev; |
| |
| req->handler = zfcp_fsf_fcp_task_mgmt_handler; |
| req->qtcb->header.lun_handle = zfcp_sdev->lun_handle; |
| req->qtcb->header.port_handle = zfcp_sdev->port->handle; |
| req->qtcb->bottom.io.data_direction = FSF_DATADIR_CMND; |
| req->qtcb->bottom.io.service_class = FSF_CLASS_3; |
| req->qtcb->bottom.io.fcp_cmnd_length = FCP_CMND_LEN; |
| |
| zfcp_qdio_set_sbale_last(qdio, &req->qdio_req); |
| |
| fcp_cmnd = &req->qtcb->bottom.io.fcp_cmnd.iu; |
| zfcp_fc_fcp_tm(fcp_cmnd, sdev, tm_flags); |
| |
| zfcp_fsf_start_timer(req, ZFCP_FSF_SCSI_ER_TIMEOUT); |
| if (!zfcp_fsf_req_send(req)) { |
| /* NOTE: DO NOT TOUCH req, UNTIL IT COMPLETES! */ |
| goto out; |
| } |
| |
| zfcp_fsf_req_free(req); |
| req = NULL; |
| out: |
| spin_unlock_irq(&qdio->req_q_lock); |
| return req; |
| } |
| |
| /** |
| * zfcp_fsf_reqid_check - validate req_id contained in SBAL returned by QDIO |
| * @qdio: pointer to struct zfcp_qdio |
| * @sbal_idx: response queue index of SBAL to be processed |
| */ |
| void zfcp_fsf_reqid_check(struct zfcp_qdio *qdio, int sbal_idx) |
| { |
| struct zfcp_adapter *adapter = qdio->adapter; |
| struct qdio_buffer *sbal = qdio->res_q[sbal_idx]; |
| struct qdio_buffer_element *sbale; |
| struct zfcp_fsf_req *fsf_req; |
| unsigned long req_id; |
| int idx; |
| |
| for (idx = 0; idx < QDIO_MAX_ELEMENTS_PER_BUFFER; idx++) { |
| |
| sbale = &sbal->element[idx]; |
| req_id = sbale->addr; |
| fsf_req = zfcp_reqlist_find_rm(adapter->req_list, req_id); |
| |
| if (!fsf_req) { |
| /* |
| * Unknown request means that we have potentially memory |
| * corruption and must stop the machine immediately. |
| */ |
| zfcp_qdio_siosl(adapter); |
| panic("error: unknown req_id (%lx) on adapter %s.\n", |
| req_id, dev_name(&adapter->ccw_device->dev)); |
| } |
| |
| zfcp_fsf_req_complete(fsf_req); |
| |
| if (likely(sbale->eflags & SBAL_EFLAGS_LAST_ENTRY)) |
| break; |
| } |
| } |