drivers/usb/host/ehci-fsl.c

// SPDX-License-Identifier: GPL-2.0+
/*
 * Copyright 2005-2009 MontaVista Software, Inc.
 * Copyright 2008,2012,2015      Freescale Semiconductor, Inc.
 *
 * Ported to 834x by Randy Vinson <rvinson@mvista.com> using code provided
 * by Hunter Wu.
 * Power Management support by Dave Liu <daveliu@freescale.com>,
 * Jerry Huang <Chang-Ming.Huang@freescale.com> and
 * Anton Vorontsov <avorontsov@ru.mvista.com>.
 */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/delay.h>
#include <linux/pm.h>
#include <linux/err.h>
#include <linux/usb.h>
#include <linux/usb/ehci_def.h>
#include <linux/usb/hcd.h>
#include <linux/usb/otg.h>
#include <linux/platform_device.h>
#include <linux/fsl_devices.h>
#include <linux/of_platform.h>
#include <linux/io.h>

#include "ehci.h"
#include "ehci-fsl.h"

#define DRIVER_DESC "Freescale EHCI Host controller driver"
#define DRV_NAME "fsl-ehci"

static struct hc_driver __read_mostly fsl_ehci_hc_driver;

/* configure so an HC device and id are always provided */
/* always called with process context; sleeping is OK */

/*
 * fsl_ehci_drv_probe - initialize FSL-based HCDs
 * @pdev: USB Host Controller being probed
 *
 * Context: task context, might sleep
 *
 * Allocates basic resources for this USB host controller.
 */
static int fsl_ehci_drv_probe(struct platform_device *pdev)
{
	struct fsl_usb2_platform_data *pdata;
	struct usb_hcd *hcd;
	struct resource *res;
	int irq;
	int retval;
	u32 tmp;

	pr_debug("initializing FSL-SOC USB Controller\n");

	/* Need platform data for setup */
	pdata = dev_get_platdata(&pdev->dev);
	if (!pdata) {
		dev_err(&pdev->dev,
			"No platform data for %s.\n", dev_name(&pdev->dev));
		return -ENODEV;
	}

	/*
	 * This is a host mode driver, verify that we're supposed to be
	 * in host mode.
	 */
	if (!((pdata->operating_mode == FSL_USB2_DR_HOST) ||
	      (pdata->operating_mode == FSL_USB2_MPH_HOST) ||
	      (pdata->operating_mode == FSL_USB2_DR_OTG))) {
		dev_err(&pdev->dev,
			"Non Host Mode configured for %s. Wrong driver linked.\n",
			dev_name(&pdev->dev));
		return -ENODEV;
	}

	irq = platform_get_irq(pdev, 0);
	if (irq < 0)
		return irq;

	hcd = __usb_create_hcd(&fsl_ehci_hc_driver, pdev->dev.parent,
			       &pdev->dev, dev_name(&pdev->dev), NULL);
	if (!hcd) {
		retval = -ENOMEM;
		goto err1;
	}

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	hcd->regs = devm_ioremap_resource(&pdev->dev, res);
	if (IS_ERR(hcd->regs)) {
		retval = PTR_ERR(hcd->regs);
		goto err2;
	}

	hcd->rsrc_start = res->start;
	hcd->rsrc_len = resource_size(res);

	pdata->regs = hcd->regs;

	if (pdata->power_budget)
		hcd->power_budget = pdata->power_budget;

	/*
	 * do platform specific init: check the clock, grab/config pins, etc.
	 */
	if (pdata->init && pdata->init(pdev)) {
		retval = -ENODEV;
		goto err2;
	}

	/* Enable USB controller, 83xx or 8536 */
	if (pdata->have_sysif_regs && pdata->controller_ver < FSL_USB_VER_1_6) {
		tmp = ioread32be(hcd->regs + FSL_SOC_USB_CTRL);
		tmp &= ~CONTROL_REGISTER_W1C_MASK;
		tmp |= 0x4;
		iowrite32be(tmp, hcd->regs + FSL_SOC_USB_CTRL);
	}

	/* Set USB_EN bit to select ULPI phy for USB controller version 2.5 */
	if (pdata->controller_ver == FSL_USB_VER_2_5 &&
	    pdata->phy_mode == FSL_USB2_PHY_ULPI)
		iowrite32be(USB_CTRL_USB_EN, hcd->regs + FSL_SOC_USB_CTRL);

	/*
	 * Enable UTMI phy and program PTS field in UTMI mode before asserting
	 * controller reset for USB Controller version 2.5
	 */
	if (pdata->has_fsl_erratum_a007792) {
		tmp = ioread32be(hcd->regs + FSL_SOC_USB_CTRL);
		tmp &= ~CONTROL_REGISTER_W1C_MASK;
		tmp |= CTRL_UTMI_PHY_EN;
		iowrite32be(tmp, hcd->regs + FSL_SOC_USB_CTRL);

		writel(PORT_PTS_UTMI, hcd->regs + FSL_SOC_USB_PORTSC1);
	}

	/* Don't need to set host mode here. It will be done by tdi_reset() */

	retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
	if (retval != 0)
		goto err2;
	device_wakeup_enable(hcd->self.controller);

#ifdef CONFIG_USB_OTG
	if (pdata->operating_mode == FSL_USB2_DR_OTG) {
		struct ehci_hcd *ehci = hcd_to_ehci(hcd);

		hcd->usb_phy = usb_get_phy(USB_PHY_TYPE_USB2);
		dev_dbg(&pdev->dev, "hcd=0x%p  ehci=0x%p, phy=0x%p\n",
			hcd, ehci, hcd->usb_phy);

		if (!IS_ERR_OR_NULL(hcd->usb_phy)) {
			retval = otg_set_host(hcd->usb_phy->otg,
					      &ehci_to_hcd(ehci)->self);
			if (retval) {
				usb_put_phy(hcd->usb_phy);
				goto err2;
			}
		} else {
			dev_err(&pdev->dev, "can't find phy\n");
			retval = -ENODEV;
			goto err2;
		}

		hcd->skip_phy_initialization = 1;
	}
#endif
	return retval;

      err2:
	usb_put_hcd(hcd);
      err1:
	dev_err(&pdev->dev, "init %s fail, %d\n", dev_name(&pdev->dev), retval);
	if (pdata->exit)
		pdata->exit(pdev);
	return retval;
}

static bool usb_phy_clk_valid(struct usb_hcd *hcd)
{
	void __iomem *non_ehci = hcd->regs;
	bool ret = true;

	if (!(ioread32be(non_ehci + FSL_SOC_USB_CTRL) & PHY_CLK_VALID))
		ret = false;

	return ret;
}

static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
			       enum fsl_usb2_phy_modes phy_mode,
			       unsigned int port_offset)
{
	u32 portsc, tmp;
	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
	void __iomem *non_ehci = hcd->regs;
	struct device *dev = hcd->self.controller;
	struct fsl_usb2_platform_data *pdata = dev_get_platdata(dev);

	if (pdata->controller_ver < 0) {
		dev_warn(hcd->self.controller, "Could not get controller version\n");
		return -ENODEV;
	}

	portsc = ehci_readl(ehci, &ehci->regs->port_status[port_offset]);
	portsc &= ~(PORT_PTS_MSK | PORT_PTS_PTW);

	switch (phy_mode) {
	case FSL_USB2_PHY_ULPI:
		if (pdata->have_sysif_regs && pdata->controller_ver) {
			/* controller version 1.6 or above */
			/* turn off UTMI PHY first */
			tmp = ioread32be(non_ehci + FSL_SOC_USB_CTRL);
			tmp &= ~(CONTROL_REGISTER_W1C_MASK | UTMI_PHY_EN);
			iowrite32be(tmp, non_ehci + FSL_SOC_USB_CTRL);

			/* then turn on ULPI and enable USB controller */
			tmp = ioread32be(non_ehci + FSL_SOC_USB_CTRL);
			tmp &= ~CONTROL_REGISTER_W1C_MASK;
			tmp |= ULPI_PHY_CLK_SEL | USB_CTRL_USB_EN;
			iowrite32be(tmp, non_ehci + FSL_SOC_USB_CTRL);
		}
		portsc |= PORT_PTS_ULPI;
		break;
	case FSL_USB2_PHY_SERIAL:
		portsc |= PORT_PTS_SERIAL;
		break;
	case FSL_USB2_PHY_UTMI_WIDE:
		portsc |= PORT_PTS_PTW;
		fallthrough;
	case FSL_USB2_PHY_UTMI:
		/* Presence of this node "has_fsl_erratum_a006918"
		 * in device-tree is used to stop USB controller
		 * initialization in Linux
		 */
		if (pdata->has_fsl_erratum_a006918) {
			dev_warn(dev, "USB PHY clock invalid\n");
			return -EINVAL;
		}
		fallthrough;
	case FSL_USB2_PHY_UTMI_DUAL:
		/* PHY_CLK_VALID bit is de-featured from all controller
		 * versions below 2.4 and is to be checked only for
		 * internal UTMI phy
		 */
		if (pdata->controller_ver > FSL_USB_VER_2_4 &&
		    pdata->have_sysif_regs && !usb_phy_clk_valid(hcd)) {
			dev_err(dev, "USB PHY clock invalid\n");
			return -EINVAL;
		}

		if (pdata->have_sysif_regs && pdata->controller_ver) {
			/* controller version 1.6 or above */
			tmp = ioread32be(non_ehci + FSL_SOC_USB_CTRL);
			tmp &= ~CONTROL_REGISTER_W1C_MASK;
			tmp |= UTMI_PHY_EN;
			iowrite32be(tmp, non_ehci + FSL_SOC_USB_CTRL);

			mdelay(FSL_UTMI_PHY_DLY);  /* Delay for UTMI PHY CLK to
						become stable - 10ms*/
		}
		/* enable UTMI PHY */
		if (pdata->have_sysif_regs) {
			tmp = ioread32be(non_ehci + FSL_SOC_USB_CTRL);
			tmp &= ~CONTROL_REGISTER_W1C_MASK;
			tmp |= CTRL_UTMI_PHY_EN;
			iowrite32be(tmp, non_ehci + FSL_SOC_USB_CTRL);
		}
		portsc |= PORT_PTS_UTMI;
		break;
	case FSL_USB2_PHY_NONE:
		break;
	}

	if (pdata->have_sysif_regs &&
	    pdata->controller_ver > FSL_USB_VER_1_6 &&
	    !usb_phy_clk_valid(hcd)) {
		dev_warn(hcd->self.controller, "USB PHY clock invalid\n");
		return -EINVAL;
	}

	ehci_writel(ehci, portsc, &ehci->regs->port_status[port_offset]);

	if (phy_mode != FSL_USB2_PHY_ULPI && pdata->have_sysif_regs) {
		tmp = ioread32be(non_ehci + FSL_SOC_USB_CTRL);
		tmp &= ~CONTROL_REGISTER_W1C_MASK;
		tmp |= USB_CTRL_USB_EN;
		iowrite32be(tmp, non_ehci + FSL_SOC_USB_CTRL);
	}

	return 0;
}

static int ehci_fsl_usb_setup(struct ehci_hcd *ehci)
{
	struct usb_hcd *hcd = ehci_to_hcd(ehci);
	struct fsl_usb2_platform_data *pdata;
	void __iomem *non_ehci = hcd->regs;

	pdata = dev_get_platdata(hcd->self.controller);

	if (pdata->have_sysif_regs) {
		/*
		* Turn on cache snooping hardware, since some PowerPC platforms
		* wholly rely on hardware to deal with cache coherent
		*/

		/* Setup Snooping for all the 4GB space */
		/* SNOOP1 starts from 0x0, size 2G */
		iowrite32be(0x0 | SNOOP_SIZE_2GB,
			    non_ehci + FSL_SOC_USB_SNOOP1);
		/* SNOOP2 starts from 0x80000000, size 2G */
		iowrite32be(0x80000000 | SNOOP_SIZE_2GB,
			    non_ehci + FSL_SOC_USB_SNOOP2);
	}

	/* Deal with USB erratum A-005275 */
	if (pdata->has_fsl_erratum_a005275 == 1)
		ehci->has_fsl_hs_errata = 1;

	if (pdata->has_fsl_erratum_a005697 == 1)
		ehci->has_fsl_susp_errata = 1;

	if ((pdata->operating_mode == FSL_USB2_DR_HOST) ||
			(pdata->operating_mode == FSL_USB2_DR_OTG))
		if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0))
			return -EINVAL;

	if (pdata->operating_mode == FSL_USB2_MPH_HOST) {

		/* Deal with USB Erratum #14 on MPC834x Rev 1.0 & 1.1 chips */
		if (pdata->has_fsl_erratum_14 == 1)
			ehci->has_fsl_port_bug = 1;

		if (pdata->port_enables & FSL_USB2_PORT0_ENABLED)
			if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0))
				return -EINVAL;

		if (pdata->port_enables & FSL_USB2_PORT1_ENABLED)
			if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 1))
				return -EINVAL;
	}

	if (pdata->have_sysif_regs) {
#ifdef CONFIG_FSL_SOC_BOOKE
		iowrite32be(0x00000008, non_ehci + FSL_SOC_USB_PRICTRL);
		iowrite32be(0x00000080, non_ehci + FSL_SOC_USB_AGECNTTHRSH);
#else
		iowrite32be(0x0000000c, non_ehci + FSL_SOC_USB_PRICTRL);
		iowrite32be(0x00000040, non_ehci + FSL_SOC_USB_AGECNTTHRSH);
#endif
		iowrite32be(0x00000001, non_ehci + FSL_SOC_USB_SICTRL);
	}

	return 0;
}

/* called after powerup, by probe or system-pm "wakeup" */
static int ehci_fsl_reinit(struct ehci_hcd *ehci)
{
	if (ehci_fsl_usb_setup(ehci))
		return -EINVAL;

	return 0;
}

/* called during probe() after chip reset completes */
static int ehci_fsl_setup(struct usb_hcd *hcd)
{
	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
	int retval;
	struct fsl_usb2_platform_data *pdata;
	struct device *dev;

	dev = hcd->self.controller;
	pdata = dev_get_platdata(hcd->self.controller);
	ehci->big_endian_desc = pdata->big_endian_desc;
	ehci->big_endian_mmio = pdata->big_endian_mmio;

	/* EHCI registers start at offset 0x100 */
	ehci->caps = hcd->regs + 0x100;

#if defined(CONFIG_PPC_83xx) || defined(CONFIG_PPC_85xx)
	/*
	 * Deal with MPC834X/85XX that need port power to be cycled
	 * after the power fault condition is removed. Otherwise the
	 * state machine does not reflect PORTSC[CSC] correctly.
	 */
	ehci->need_oc_pp_cycle = 1;
#endif

	hcd->has_tt = 1;

	retval = ehci_setup(hcd);
	if (retval)
		return retval;

	if (of_device_is_compatible(dev->parent->of_node,
				    "fsl,mpc5121-usb2-dr")) {
		/*
		 * set SBUSCFG:AHBBRST so that control msgs don't
		 * fail when doing heavy PATA writes.
		 */
		ehci_writel(ehci, SBUSCFG_INCR8,
			    hcd->regs + FSL_SOC_USB_SBUSCFG);
	}

	retval = ehci_fsl_reinit(ehci);
	return retval;
}

struct ehci_fsl {
	struct ehci_hcd	ehci;

#ifdef CONFIG_PM
	/* Saved USB PHY settings, need to restore after deep sleep. */
	u32 usb_ctrl;
#endif
};

#ifdef CONFIG_PM

#ifdef CONFIG_PPC_MPC512x
static int ehci_fsl_mpc512x_drv_suspend(struct device *dev)
{
	struct usb_hcd *hcd = dev_get_drvdata(dev);
	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
	struct fsl_usb2_platform_data *pdata = dev_get_platdata(dev);
	u32 tmp;

#ifdef CONFIG_DYNAMIC_DEBUG
	u32 mode = ehci_readl(ehci, hcd->regs + FSL_SOC_USB_USBMODE);
	mode &= USBMODE_CM_MASK;
	tmp = ehci_readl(ehci, hcd->regs + 0x140);	/* usbcmd */

	dev_dbg(dev, "suspend=%d already_suspended=%d "
		"mode=%d  usbcmd %08x\n", pdata->suspended,
		pdata->already_suspended, mode, tmp);
#endif

	/*
	 * If the controller is already suspended, then this must be a
	 * PM suspend.  Remember this fact, so that we will leave the
	 * controller suspended at PM resume time.
	 */
	if (pdata->suspended) {
		dev_dbg(dev, "already suspended, leaving early\n");
		pdata->already_suspended = 1;
		return 0;
	}

	dev_dbg(dev, "suspending...\n");

	ehci->rh_state = EHCI_RH_SUSPENDED;
	dev->power.power_state = PMSG_SUSPEND;

	/* ignore non-host interrupts */
	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);

	/* stop the controller */
	tmp = ehci_readl(ehci, &ehci->regs->command);
	tmp &= ~CMD_RUN;
	ehci_writel(ehci, tmp, &ehci->regs->command);

	/* save EHCI registers */
	pdata->pm_command = ehci_readl(ehci, &ehci->regs->command);
	pdata->pm_command &= ~CMD_RUN;
	pdata->pm_status  = ehci_readl(ehci, &ehci->regs->status);
	pdata->pm_intr_enable  = ehci_readl(ehci, &ehci->regs->intr_enable);
	pdata->pm_frame_index  = ehci_readl(ehci, &ehci->regs->frame_index);
	pdata->pm_segment  = ehci_readl(ehci, &ehci->regs->segment);
	pdata->pm_frame_list  = ehci_readl(ehci, &ehci->regs->frame_list);
	pdata->pm_async_next  = ehci_readl(ehci, &ehci->regs->async_next);
	pdata->pm_configured_flag  =
		ehci_readl(ehci, &ehci->regs->configured_flag);
	pdata->pm_portsc = ehci_readl(ehci, &ehci->regs->port_status[0]);
	pdata->pm_usbgenctrl = ehci_readl(ehci,
					  hcd->regs + FSL_SOC_USB_USBGENCTRL);

	/* clear the W1C bits */
	pdata->pm_portsc &= cpu_to_hc32(ehci, ~PORT_RWC_BITS);

	pdata->suspended = 1;

	/* clear PP to cut power to the port */
	tmp = ehci_readl(ehci, &ehci->regs->port_status[0]);
	tmp &= ~PORT_POWER;
	ehci_writel(ehci, tmp, &ehci->regs->port_status[0]);

	return 0;
}

static int ehci_fsl_mpc512x_drv_resume(struct device *dev)
{
	struct usb_hcd *hcd = dev_get_drvdata(dev);
	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
	struct fsl_usb2_platform_data *pdata = dev_get_platdata(dev);
	u32 tmp;

	dev_dbg(dev, "suspend=%d already_suspended=%d\n",
		pdata->suspended, pdata->already_suspended);

	/*
	 * If the controller was already suspended at suspend time,
	 * then don't resume it now.
	 */
	if (pdata->already_suspended) {
		dev_dbg(dev, "already suspended, leaving early\n");
		pdata->already_suspended = 0;
		return 0;
	}

	if (!pdata->suspended) {
		dev_dbg(dev, "not suspended, leaving early\n");
		return 0;
	}

	pdata->suspended = 0;

	dev_dbg(dev, "resuming...\n");

	/* set host mode */
	tmp = USBMODE_CM_HOST | (pdata->es ? USBMODE_ES : 0);
	ehci_writel(ehci, tmp, hcd->regs + FSL_SOC_USB_USBMODE);

	ehci_writel(ehci, pdata->pm_usbgenctrl,
		    hcd->regs + FSL_SOC_USB_USBGENCTRL);
	ehci_writel(ehci, ISIPHYCTRL_PXE | ISIPHYCTRL_PHYE,
		    hcd->regs + FSL_SOC_USB_ISIPHYCTRL);

	ehci_writel(ehci, SBUSCFG_INCR8, hcd->regs + FSL_SOC_USB_SBUSCFG);

	/* restore EHCI registers */
	ehci_writel(ehci, pdata->pm_command, &ehci->regs->command);
	ehci_writel(ehci, pdata->pm_intr_enable, &ehci->regs->intr_enable);
	ehci_writel(ehci, pdata->pm_frame_index, &ehci->regs->frame_index);
	ehci_writel(ehci, pdata->pm_segment, &ehci->regs->segment);
	ehci_writel(ehci, pdata->pm_frame_list, &ehci->regs->frame_list);
	ehci_writel(ehci, pdata->pm_async_next, &ehci->regs->async_next);
	ehci_writel(ehci, pdata->pm_configured_flag,
		    &ehci->regs->configured_flag);
	ehci_writel(ehci, pdata->pm_portsc, &ehci->regs->port_status[0]);

	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
	ehci->rh_state = EHCI_RH_RUNNING;
	dev->power.power_state = PMSG_ON;

	tmp = ehci_readl(ehci, &ehci->regs->command);
	tmp |= CMD_RUN;
	ehci_writel(ehci, tmp, &ehci->regs->command);

	usb_hcd_resume_root_hub(hcd);

	return 0;
}
#else
static inline int ehci_fsl_mpc512x_drv_suspend(struct device *dev)
{
	return 0;
}

static inline int ehci_fsl_mpc512x_drv_resume(struct device *dev)
{
	return 0;
}
#endif /* CONFIG_PPC_MPC512x */

static struct ehci_fsl *hcd_to_ehci_fsl(struct usb_hcd *hcd)
{
	struct ehci_hcd *ehci = hcd_to_ehci(hcd);

	return container_of(ehci, struct ehci_fsl, ehci);
}

static int ehci_fsl_drv_suspend(struct device *dev)
{
	struct usb_hcd *hcd = dev_get_drvdata(dev);
	struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd);
	void __iomem *non_ehci = hcd->regs;

	if (of_device_is_compatible(dev->parent->of_node,
				    "fsl,mpc5121-usb2-dr")) {
		return ehci_fsl_mpc512x_drv_suspend(dev);
	}

	ehci_prepare_ports_for_controller_suspend(hcd_to_ehci(hcd),
			device_may_wakeup(dev));
	if (!fsl_deep_sleep())
		return 0;

	ehci_fsl->usb_ctrl = ioread32be(non_ehci + FSL_SOC_USB_CTRL);
	return 0;
}

static int ehci_fsl_drv_resume(struct device *dev)
{
	struct usb_hcd *hcd = dev_get_drvdata(dev);
	struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd);
	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
	void __iomem *non_ehci = hcd->regs;

	if (of_device_is_compatible(dev->parent->of_node,
				    "fsl,mpc5121-usb2-dr")) {
		return ehci_fsl_mpc512x_drv_resume(dev);
	}

	ehci_prepare_ports_for_controller_resume(ehci);
	if (!fsl_deep_sleep())
		return 0;

	usb_root_hub_lost_power(hcd->self.root_hub);

	/* Restore USB PHY settings and enable the controller. */
	iowrite32be(ehci_fsl->usb_ctrl, non_ehci + FSL_SOC_USB_CTRL);

	ehci_reset(ehci);
	ehci_fsl_reinit(ehci);

	return 0;
}

static int ehci_fsl_drv_restore(struct device *dev)
{
	struct usb_hcd *hcd = dev_get_drvdata(dev);

	usb_root_hub_lost_power(hcd->self.root_hub);
	return 0;
}

static const struct dev_pm_ops ehci_fsl_pm_ops = {
	.suspend = ehci_fsl_drv_suspend,
	.resume = ehci_fsl_drv_resume,
	.restore = ehci_fsl_drv_restore,
};

#define EHCI_FSL_PM_OPS		(&ehci_fsl_pm_ops)
#else
#define EHCI_FSL_PM_OPS		NULL
#endif /* CONFIG_PM */

#ifdef CONFIG_USB_OTG
static int ehci_start_port_reset(struct usb_hcd *hcd, unsigned port)
{
	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
	u32 status;

	if (!port)
		return -EINVAL;

	port--;

	/* start port reset before HNP protocol time out */
	status = readl(&ehci->regs->port_status[port]);
	if (!(status & PORT_CONNECT))
		return -ENODEV;

	/* hub_wq will finish the reset later */
	if (ehci_is_TDI(ehci)) {
		writel(PORT_RESET |
		       (status & ~(PORT_CSC | PORT_PEC | PORT_OCC)),
		       &ehci->regs->port_status[port]);
	} else {
		writel(PORT_RESET, &ehci->regs->port_status[port]);
	}

	return 0;
}
#else
#define ehci_start_port_reset	NULL
#endif /* CONFIG_USB_OTG */

static const struct ehci_driver_overrides ehci_fsl_overrides __initconst = {
	.extra_priv_size = sizeof(struct ehci_fsl),
	.reset = ehci_fsl_setup,
};

/**
 * fsl_ehci_drv_remove - shutdown processing for FSL-based HCDs
 * @pdev: USB Host Controller being removed
 *
 * Context: task context, might sleep
 *
 * Reverses the effect of usb_hcd_fsl_probe().
 */
static int fsl_ehci_drv_remove(struct platform_device *pdev)
{
	struct fsl_usb2_platform_data *pdata = dev_get_platdata(&pdev->dev);
	struct usb_hcd *hcd = platform_get_drvdata(pdev);

	if (!IS_ERR_OR_NULL(hcd->usb_phy)) {
		otg_set_host(hcd->usb_phy->otg, NULL);
		usb_put_phy(hcd->usb_phy);
	}

	usb_remove_hcd(hcd);

	/*
	 * do platform specific un-initialization:
	 * release iomux pins, disable clock, etc.
	 */
	if (pdata->exit)
		pdata->exit(pdev);
	usb_put_hcd(hcd);

	return 0;
}

static struct platform_driver ehci_fsl_driver = {
	.probe = fsl_ehci_drv_probe,
	.remove = fsl_ehci_drv_remove,
	.shutdown = usb_hcd_platform_shutdown,
	.driver = {
		.name = "fsl-ehci",
		.pm = EHCI_FSL_PM_OPS,
	},
};

static int __init ehci_fsl_init(void)
{
	if (usb_disabled())
		return -ENODEV;

	ehci_init_driver(&fsl_ehci_hc_driver, &ehci_fsl_overrides);

	fsl_ehci_hc_driver.product_desc =
			"Freescale On-Chip EHCI Host Controller";
	fsl_ehci_hc_driver.start_port_reset = ehci_start_port_reset;


	return platform_driver_register(&ehci_fsl_driver);
}
module_init(ehci_fsl_init);

static void __exit ehci_fsl_cleanup(void)
{
	platform_driver_unregister(&ehci_fsl_driver);
}
module_exit(ehci_fsl_cleanup);

MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:" DRV_NAME);