| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (c) 2015-2021, The Linux Foundation. All rights reserved. |
| */ |
| |
| #include <linux/bitops.h> |
| #include <linux/err.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/iopoll.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| #include <linux/sysfs.h> |
| #include <linux/usb/role.h> |
| |
| #define EUD_REG_INT1_EN_MASK 0x0024 |
| #define EUD_REG_INT_STATUS_1 0x0044 |
| #define EUD_REG_CTL_OUT_1 0x0074 |
| #define EUD_REG_VBUS_INT_CLR 0x0080 |
| #define EUD_REG_CSR_EUD_EN 0x1014 |
| #define EUD_REG_SW_ATTACH_DET 0x1018 |
| #define EUD_REG_EUD_EN2 0x0000 |
| |
| #define EUD_ENABLE BIT(0) |
| #define EUD_INT_PET_EUD BIT(0) |
| #define EUD_INT_VBUS BIT(2) |
| #define EUD_INT_SAFE_MODE BIT(4) |
| #define EUD_INT_ALL (EUD_INT_VBUS | EUD_INT_SAFE_MODE) |
| |
| struct eud_chip { |
| struct device *dev; |
| struct usb_role_switch *role_sw; |
| void __iomem *base; |
| void __iomem *mode_mgr; |
| unsigned int int_status; |
| int irq; |
| bool enabled; |
| bool usb_attached; |
| }; |
| |
| static int enable_eud(struct eud_chip *priv) |
| { |
| writel(EUD_ENABLE, priv->base + EUD_REG_CSR_EUD_EN); |
| writel(EUD_INT_VBUS | EUD_INT_SAFE_MODE, |
| priv->base + EUD_REG_INT1_EN_MASK); |
| writel(1, priv->mode_mgr + EUD_REG_EUD_EN2); |
| |
| return usb_role_switch_set_role(priv->role_sw, USB_ROLE_DEVICE); |
| } |
| |
| static void disable_eud(struct eud_chip *priv) |
| { |
| writel(0, priv->base + EUD_REG_CSR_EUD_EN); |
| writel(0, priv->mode_mgr + EUD_REG_EUD_EN2); |
| } |
| |
| static ssize_t enable_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct eud_chip *chip = dev_get_drvdata(dev); |
| |
| return sysfs_emit(buf, "%d\n", chip->enabled); |
| } |
| |
| static ssize_t enable_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct eud_chip *chip = dev_get_drvdata(dev); |
| bool enable; |
| int ret; |
| |
| if (kstrtobool(buf, &enable)) |
| return -EINVAL; |
| |
| if (enable) { |
| ret = enable_eud(chip); |
| if (!ret) |
| chip->enabled = enable; |
| else |
| disable_eud(chip); |
| } else { |
| disable_eud(chip); |
| } |
| |
| return count; |
| } |
| |
| static DEVICE_ATTR_RW(enable); |
| |
| static struct attribute *eud_attrs[] = { |
| &dev_attr_enable.attr, |
| NULL, |
| }; |
| ATTRIBUTE_GROUPS(eud); |
| |
| static void usb_attach_detach(struct eud_chip *chip) |
| { |
| u32 reg; |
| |
| /* read ctl_out_1[4] to find USB attach or detach event */ |
| reg = readl(chip->base + EUD_REG_CTL_OUT_1); |
| chip->usb_attached = reg & EUD_INT_SAFE_MODE; |
| } |
| |
| static void pet_eud(struct eud_chip *chip) |
| { |
| u32 reg; |
| int ret; |
| |
| /* When the EUD_INT_PET_EUD in SW_ATTACH_DET is set, the cable has been |
| * disconnected and we need to detach the pet to check if EUD is in safe |
| * mode before attaching again. |
| */ |
| reg = readl(chip->base + EUD_REG_SW_ATTACH_DET); |
| if (reg & EUD_INT_PET_EUD) { |
| /* Detach & Attach pet for EUD */ |
| writel(0, chip->base + EUD_REG_SW_ATTACH_DET); |
| /* Delay to make sure detach pet is done before attach pet */ |
| ret = readl_poll_timeout(chip->base + EUD_REG_SW_ATTACH_DET, |
| reg, (reg == 0), 1, 100); |
| if (ret) { |
| dev_err(chip->dev, "Detach pet failed\n"); |
| return; |
| } |
| } |
| /* Attach pet for EUD */ |
| writel(EUD_INT_PET_EUD, chip->base + EUD_REG_SW_ATTACH_DET); |
| } |
| |
| static irqreturn_t handle_eud_irq(int irq, void *data) |
| { |
| struct eud_chip *chip = data; |
| u32 reg; |
| |
| reg = readl(chip->base + EUD_REG_INT_STATUS_1); |
| switch (reg & EUD_INT_ALL) { |
| case EUD_INT_VBUS: |
| usb_attach_detach(chip); |
| return IRQ_WAKE_THREAD; |
| case EUD_INT_SAFE_MODE: |
| pet_eud(chip); |
| return IRQ_HANDLED; |
| default: |
| return IRQ_NONE; |
| } |
| } |
| |
| static irqreturn_t handle_eud_irq_thread(int irq, void *data) |
| { |
| struct eud_chip *chip = data; |
| int ret; |
| |
| if (chip->usb_attached) |
| ret = usb_role_switch_set_role(chip->role_sw, USB_ROLE_DEVICE); |
| else |
| ret = usb_role_switch_set_role(chip->role_sw, USB_ROLE_HOST); |
| if (ret) |
| dev_err(chip->dev, "failed to set role switch\n"); |
| |
| /* set and clear vbus_int_clr[0] to clear interrupt */ |
| writel(BIT(0), chip->base + EUD_REG_VBUS_INT_CLR); |
| writel(0, chip->base + EUD_REG_VBUS_INT_CLR); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void eud_role_switch_release(void *data) |
| { |
| struct eud_chip *chip = data; |
| |
| usb_role_switch_put(chip->role_sw); |
| } |
| |
| static int eud_probe(struct platform_device *pdev) |
| { |
| struct eud_chip *chip; |
| int ret; |
| |
| chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL); |
| if (!chip) |
| return -ENOMEM; |
| |
| chip->dev = &pdev->dev; |
| |
| chip->role_sw = usb_role_switch_get(&pdev->dev); |
| if (IS_ERR(chip->role_sw)) |
| return dev_err_probe(chip->dev, PTR_ERR(chip->role_sw), |
| "failed to get role switch\n"); |
| |
| ret = devm_add_action_or_reset(chip->dev, eud_role_switch_release, chip); |
| if (ret) |
| return dev_err_probe(chip->dev, ret, |
| "failed to add role switch release action\n"); |
| |
| chip->base = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(chip->base)) |
| return PTR_ERR(chip->base); |
| |
| chip->mode_mgr = devm_platform_ioremap_resource(pdev, 1); |
| if (IS_ERR(chip->mode_mgr)) |
| return PTR_ERR(chip->mode_mgr); |
| |
| chip->irq = platform_get_irq(pdev, 0); |
| ret = devm_request_threaded_irq(&pdev->dev, chip->irq, handle_eud_irq, |
| handle_eud_irq_thread, IRQF_ONESHOT, NULL, chip); |
| if (ret) |
| return dev_err_probe(chip->dev, ret, "failed to allocate irq\n"); |
| |
| enable_irq_wake(chip->irq); |
| |
| platform_set_drvdata(pdev, chip); |
| |
| return 0; |
| } |
| |
| static int eud_remove(struct platform_device *pdev) |
| { |
| struct eud_chip *chip = platform_get_drvdata(pdev); |
| |
| if (chip->enabled) |
| disable_eud(chip); |
| |
| device_init_wakeup(&pdev->dev, false); |
| disable_irq_wake(chip->irq); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id eud_dt_match[] = { |
| { .compatible = "qcom,sc7280-eud" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, eud_dt_match); |
| |
| static struct platform_driver eud_driver = { |
| .probe = eud_probe, |
| .remove = eud_remove, |
| .driver = { |
| .name = "qcom_eud", |
| .dev_groups = eud_groups, |
| .of_match_table = eud_dt_match, |
| }, |
| }; |
| module_platform_driver(eud_driver); |
| |
| MODULE_DESCRIPTION("QTI EUD driver"); |
| MODULE_LICENSE("GPL v2"); |