| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) 2008 Oracle. All rights reserved. |
| * |
| * Based on jffs2 zlib code: |
| * Copyright © 2001-2007 Red Hat, Inc. |
| * Created by David Woodhouse <dwmw2@infradead.org> |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/zlib.h> |
| #include <linux/zutil.h> |
| #include <linux/mm.h> |
| #include <linux/init.h> |
| #include <linux/err.h> |
| #include <linux/sched.h> |
| #include <linux/pagemap.h> |
| #include <linux/bio.h> |
| #include <linux/refcount.h> |
| #include "compression.h" |
| |
| /* workspace buffer size for s390 zlib hardware support */ |
| #define ZLIB_DFLTCC_BUF_SIZE (4 * PAGE_SIZE) |
| |
| struct workspace { |
| z_stream strm; |
| char *buf; |
| unsigned int buf_size; |
| struct list_head list; |
| int level; |
| }; |
| |
| static struct workspace_manager wsm; |
| |
| struct list_head *zlib_get_workspace(unsigned int level) |
| { |
| struct list_head *ws = btrfs_get_workspace(BTRFS_COMPRESS_ZLIB, level); |
| struct workspace *workspace = list_entry(ws, struct workspace, list); |
| |
| workspace->level = level; |
| |
| return ws; |
| } |
| |
| void zlib_free_workspace(struct list_head *ws) |
| { |
| struct workspace *workspace = list_entry(ws, struct workspace, list); |
| |
| kvfree(workspace->strm.workspace); |
| kfree(workspace->buf); |
| kfree(workspace); |
| } |
| |
| struct list_head *zlib_alloc_workspace(unsigned int level) |
| { |
| struct workspace *workspace; |
| int workspacesize; |
| |
| workspace = kzalloc(sizeof(*workspace), GFP_KERNEL); |
| if (!workspace) |
| return ERR_PTR(-ENOMEM); |
| |
| workspacesize = max(zlib_deflate_workspacesize(MAX_WBITS, MAX_MEM_LEVEL), |
| zlib_inflate_workspacesize()); |
| workspace->strm.workspace = kvzalloc(workspacesize, GFP_KERNEL); |
| workspace->level = level; |
| workspace->buf = NULL; |
| /* |
| * In case of s390 zlib hardware support, allocate lager workspace |
| * buffer. If allocator fails, fall back to a single page buffer. |
| */ |
| if (zlib_deflate_dfltcc_enabled()) { |
| workspace->buf = kmalloc(ZLIB_DFLTCC_BUF_SIZE, |
| __GFP_NOMEMALLOC | __GFP_NORETRY | |
| __GFP_NOWARN | GFP_NOIO); |
| workspace->buf_size = ZLIB_DFLTCC_BUF_SIZE; |
| } |
| if (!workspace->buf) { |
| workspace->buf = kmalloc(PAGE_SIZE, GFP_KERNEL); |
| workspace->buf_size = PAGE_SIZE; |
| } |
| if (!workspace->strm.workspace || !workspace->buf) |
| goto fail; |
| |
| INIT_LIST_HEAD(&workspace->list); |
| |
| return &workspace->list; |
| fail: |
| zlib_free_workspace(&workspace->list); |
| return ERR_PTR(-ENOMEM); |
| } |
| |
| int zlib_compress_pages(struct list_head *ws, struct address_space *mapping, |
| u64 start, struct page **pages, unsigned long *out_pages, |
| unsigned long *total_in, unsigned long *total_out) |
| { |
| struct workspace *workspace = list_entry(ws, struct workspace, list); |
| int ret; |
| char *data_in = NULL; |
| char *cpage_out; |
| int nr_pages = 0; |
| struct page *in_page = NULL; |
| struct page *out_page = NULL; |
| unsigned long bytes_left; |
| unsigned int in_buf_pages; |
| unsigned long len = *total_out; |
| unsigned long nr_dest_pages = *out_pages; |
| const unsigned long max_out = nr_dest_pages * PAGE_SIZE; |
| |
| *out_pages = 0; |
| *total_out = 0; |
| *total_in = 0; |
| |
| if (Z_OK != zlib_deflateInit(&workspace->strm, workspace->level)) { |
| pr_warn("BTRFS: deflateInit failed\n"); |
| ret = -EIO; |
| goto out; |
| } |
| |
| workspace->strm.total_in = 0; |
| workspace->strm.total_out = 0; |
| |
| out_page = alloc_page(GFP_NOFS); |
| if (out_page == NULL) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| cpage_out = page_address(out_page); |
| pages[0] = out_page; |
| nr_pages = 1; |
| |
| workspace->strm.next_in = workspace->buf; |
| workspace->strm.avail_in = 0; |
| workspace->strm.next_out = cpage_out; |
| workspace->strm.avail_out = PAGE_SIZE; |
| |
| while (workspace->strm.total_in < len) { |
| /* |
| * Get next input pages and copy the contents to |
| * the workspace buffer if required. |
| */ |
| if (workspace->strm.avail_in == 0) { |
| bytes_left = len - workspace->strm.total_in; |
| in_buf_pages = min(DIV_ROUND_UP(bytes_left, PAGE_SIZE), |
| workspace->buf_size / PAGE_SIZE); |
| if (in_buf_pages > 1) { |
| int i; |
| |
| for (i = 0; i < in_buf_pages; i++) { |
| if (data_in) { |
| kunmap_local(data_in); |
| put_page(in_page); |
| } |
| in_page = find_get_page(mapping, |
| start >> PAGE_SHIFT); |
| data_in = kmap_local_page(in_page); |
| memcpy(workspace->buf + i * PAGE_SIZE, |
| data_in, PAGE_SIZE); |
| start += PAGE_SIZE; |
| } |
| workspace->strm.next_in = workspace->buf; |
| } else { |
| if (data_in) { |
| kunmap_local(data_in); |
| put_page(in_page); |
| } |
| in_page = find_get_page(mapping, |
| start >> PAGE_SHIFT); |
| data_in = kmap_local_page(in_page); |
| start += PAGE_SIZE; |
| workspace->strm.next_in = data_in; |
| } |
| workspace->strm.avail_in = min(bytes_left, |
| (unsigned long) workspace->buf_size); |
| } |
| |
| ret = zlib_deflate(&workspace->strm, Z_SYNC_FLUSH); |
| if (ret != Z_OK) { |
| pr_debug("BTRFS: deflate in loop returned %d\n", |
| ret); |
| zlib_deflateEnd(&workspace->strm); |
| ret = -EIO; |
| goto out; |
| } |
| |
| /* we're making it bigger, give up */ |
| if (workspace->strm.total_in > 8192 && |
| workspace->strm.total_in < |
| workspace->strm.total_out) { |
| ret = -E2BIG; |
| goto out; |
| } |
| /* we need another page for writing out. Test this |
| * before the total_in so we will pull in a new page for |
| * the stream end if required |
| */ |
| if (workspace->strm.avail_out == 0) { |
| if (nr_pages == nr_dest_pages) { |
| ret = -E2BIG; |
| goto out; |
| } |
| out_page = alloc_page(GFP_NOFS); |
| if (out_page == NULL) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| cpage_out = page_address(out_page); |
| pages[nr_pages] = out_page; |
| nr_pages++; |
| workspace->strm.avail_out = PAGE_SIZE; |
| workspace->strm.next_out = cpage_out; |
| } |
| /* we're all done */ |
| if (workspace->strm.total_in >= len) |
| break; |
| if (workspace->strm.total_out > max_out) |
| break; |
| } |
| workspace->strm.avail_in = 0; |
| /* |
| * Call deflate with Z_FINISH flush parameter providing more output |
| * space but no more input data, until it returns with Z_STREAM_END. |
| */ |
| while (ret != Z_STREAM_END) { |
| ret = zlib_deflate(&workspace->strm, Z_FINISH); |
| if (ret == Z_STREAM_END) |
| break; |
| if (ret != Z_OK && ret != Z_BUF_ERROR) { |
| zlib_deflateEnd(&workspace->strm); |
| ret = -EIO; |
| goto out; |
| } else if (workspace->strm.avail_out == 0) { |
| /* get another page for the stream end */ |
| if (nr_pages == nr_dest_pages) { |
| ret = -E2BIG; |
| goto out; |
| } |
| out_page = alloc_page(GFP_NOFS); |
| if (out_page == NULL) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| cpage_out = page_address(out_page); |
| pages[nr_pages] = out_page; |
| nr_pages++; |
| workspace->strm.avail_out = PAGE_SIZE; |
| workspace->strm.next_out = cpage_out; |
| } |
| } |
| zlib_deflateEnd(&workspace->strm); |
| |
| if (workspace->strm.total_out >= workspace->strm.total_in) { |
| ret = -E2BIG; |
| goto out; |
| } |
| |
| ret = 0; |
| *total_out = workspace->strm.total_out; |
| *total_in = workspace->strm.total_in; |
| out: |
| *out_pages = nr_pages; |
| if (data_in) { |
| kunmap_local(data_in); |
| put_page(in_page); |
| } |
| |
| return ret; |
| } |
| |
| int zlib_decompress_bio(struct list_head *ws, struct compressed_bio *cb) |
| { |
| struct workspace *workspace = list_entry(ws, struct workspace, list); |
| int ret = 0, ret2; |
| int wbits = MAX_WBITS; |
| char *data_in; |
| size_t total_out = 0; |
| unsigned long page_in_index = 0; |
| size_t srclen = cb->compressed_len; |
| unsigned long total_pages_in = DIV_ROUND_UP(srclen, PAGE_SIZE); |
| unsigned long buf_start; |
| struct page **pages_in = cb->compressed_pages; |
| |
| data_in = kmap_local_page(pages_in[page_in_index]); |
| workspace->strm.next_in = data_in; |
| workspace->strm.avail_in = min_t(size_t, srclen, PAGE_SIZE); |
| workspace->strm.total_in = 0; |
| |
| workspace->strm.total_out = 0; |
| workspace->strm.next_out = workspace->buf; |
| workspace->strm.avail_out = workspace->buf_size; |
| |
| /* If it's deflate, and it's got no preset dictionary, then |
| we can tell zlib to skip the adler32 check. */ |
| if (srclen > 2 && !(data_in[1] & PRESET_DICT) && |
| ((data_in[0] & 0x0f) == Z_DEFLATED) && |
| !(((data_in[0]<<8) + data_in[1]) % 31)) { |
| |
| wbits = -((data_in[0] >> 4) + 8); |
| workspace->strm.next_in += 2; |
| workspace->strm.avail_in -= 2; |
| } |
| |
| if (Z_OK != zlib_inflateInit2(&workspace->strm, wbits)) { |
| pr_warn("BTRFS: inflateInit failed\n"); |
| kunmap_local(data_in); |
| return -EIO; |
| } |
| while (workspace->strm.total_in < srclen) { |
| ret = zlib_inflate(&workspace->strm, Z_NO_FLUSH); |
| if (ret != Z_OK && ret != Z_STREAM_END) |
| break; |
| |
| buf_start = total_out; |
| total_out = workspace->strm.total_out; |
| |
| /* we didn't make progress in this inflate call, we're done */ |
| if (buf_start == total_out) |
| break; |
| |
| ret2 = btrfs_decompress_buf2page(workspace->buf, |
| total_out - buf_start, cb, buf_start); |
| if (ret2 == 0) { |
| ret = 0; |
| goto done; |
| } |
| |
| workspace->strm.next_out = workspace->buf; |
| workspace->strm.avail_out = workspace->buf_size; |
| |
| if (workspace->strm.avail_in == 0) { |
| unsigned long tmp; |
| kunmap_local(data_in); |
| page_in_index++; |
| if (page_in_index >= total_pages_in) { |
| data_in = NULL; |
| break; |
| } |
| data_in = kmap_local_page(pages_in[page_in_index]); |
| workspace->strm.next_in = data_in; |
| tmp = srclen - workspace->strm.total_in; |
| workspace->strm.avail_in = min(tmp, PAGE_SIZE); |
| } |
| } |
| if (ret != Z_STREAM_END) |
| ret = -EIO; |
| else |
| ret = 0; |
| done: |
| zlib_inflateEnd(&workspace->strm); |
| if (data_in) |
| kunmap_local(data_in); |
| if (!ret) |
| zero_fill_bio(cb->orig_bio); |
| return ret; |
| } |
| |
| int zlib_decompress(struct list_head *ws, unsigned char *data_in, |
| struct page *dest_page, unsigned long start_byte, size_t srclen, |
| size_t destlen) |
| { |
| struct workspace *workspace = list_entry(ws, struct workspace, list); |
| int ret = 0; |
| int wbits = MAX_WBITS; |
| unsigned long bytes_left; |
| unsigned long total_out = 0; |
| unsigned long pg_offset = 0; |
| |
| destlen = min_t(unsigned long, destlen, PAGE_SIZE); |
| bytes_left = destlen; |
| |
| workspace->strm.next_in = data_in; |
| workspace->strm.avail_in = srclen; |
| workspace->strm.total_in = 0; |
| |
| workspace->strm.next_out = workspace->buf; |
| workspace->strm.avail_out = workspace->buf_size; |
| workspace->strm.total_out = 0; |
| /* If it's deflate, and it's got no preset dictionary, then |
| we can tell zlib to skip the adler32 check. */ |
| if (srclen > 2 && !(data_in[1] & PRESET_DICT) && |
| ((data_in[0] & 0x0f) == Z_DEFLATED) && |
| !(((data_in[0]<<8) + data_in[1]) % 31)) { |
| |
| wbits = -((data_in[0] >> 4) + 8); |
| workspace->strm.next_in += 2; |
| workspace->strm.avail_in -= 2; |
| } |
| |
| if (Z_OK != zlib_inflateInit2(&workspace->strm, wbits)) { |
| pr_warn("BTRFS: inflateInit failed\n"); |
| return -EIO; |
| } |
| |
| while (bytes_left > 0) { |
| unsigned long buf_start; |
| unsigned long buf_offset; |
| unsigned long bytes; |
| |
| ret = zlib_inflate(&workspace->strm, Z_NO_FLUSH); |
| if (ret != Z_OK && ret != Z_STREAM_END) |
| break; |
| |
| buf_start = total_out; |
| total_out = workspace->strm.total_out; |
| |
| if (total_out == buf_start) { |
| ret = -EIO; |
| break; |
| } |
| |
| if (total_out <= start_byte) |
| goto next; |
| |
| if (total_out > start_byte && buf_start < start_byte) |
| buf_offset = start_byte - buf_start; |
| else |
| buf_offset = 0; |
| |
| bytes = min(PAGE_SIZE - pg_offset, |
| PAGE_SIZE - (buf_offset % PAGE_SIZE)); |
| bytes = min(bytes, bytes_left); |
| |
| memcpy_to_page(dest_page, pg_offset, |
| workspace->buf + buf_offset, bytes); |
| |
| pg_offset += bytes; |
| bytes_left -= bytes; |
| next: |
| workspace->strm.next_out = workspace->buf; |
| workspace->strm.avail_out = workspace->buf_size; |
| } |
| |
| if (ret != Z_STREAM_END && bytes_left != 0) |
| ret = -EIO; |
| else |
| ret = 0; |
| |
| zlib_inflateEnd(&workspace->strm); |
| |
| /* |
| * this should only happen if zlib returned fewer bytes than we |
| * expected. btrfs_get_block is responsible for zeroing from the |
| * end of the inline extent (destlen) to the end of the page |
| */ |
| if (pg_offset < destlen) { |
| memzero_page(dest_page, pg_offset, destlen - pg_offset); |
| } |
| return ret; |
| } |
| |
| const struct btrfs_compress_op btrfs_zlib_compress = { |
| .workspace_manager = &wsm, |
| .max_level = 9, |
| .default_level = BTRFS_ZLIB_DEFAULT_LEVEL, |
| }; |