| /* SPDX-License-Identifier: GPL-2.0 */ |
| /* |
| * Copyright (C) 1995, 1996, 1997 Olaf Kirch <okir@monad.swb.de> |
| * |
| * This file describes the layout of the file handles as passed |
| * over the wire. |
| */ |
| #ifndef _LINUX_NFSD_NFSFH_H |
| #define _LINUX_NFSD_NFSFH_H |
| |
| #include <linux/crc32.h> |
| #include <linux/sunrpc/svc.h> |
| #include <linux/iversion.h> |
| #include <linux/exportfs.h> |
| #include <linux/nfs4.h> |
| |
| /* |
| * The file handle starts with a sequence of four-byte words. |
| * The first word contains a version number (1) and three descriptor bytes |
| * that tell how the remaining 3 variable length fields should be handled. |
| * These three bytes are auth_type, fsid_type and fileid_type. |
| * |
| * All four-byte values are in host-byte-order. |
| * |
| * The auth_type field is deprecated and must be set to 0. |
| * |
| * The fsid_type identifies how the filesystem (or export point) is |
| * encoded. |
| * Current values: |
| * 0 - 4 byte device id (ms-2-bytes major, ls-2-bytes minor), 4byte inode number |
| * NOTE: we cannot use the kdev_t device id value, because kdev_t.h |
| * says we mustn't. We must break it up and reassemble. |
| * 1 - 4 byte user specified identifier |
| * 2 - 4 byte major, 4 byte minor, 4 byte inode number - DEPRECATED |
| * 3 - 4 byte device id, encoded for user-space, 4 byte inode number |
| * 4 - 4 byte inode number and 4 byte uuid |
| * 5 - 8 byte uuid |
| * 6 - 16 byte uuid |
| * 7 - 8 byte inode number and 16 byte uuid |
| * |
| * The fileid_type identifies how the file within the filesystem is encoded. |
| * The values for this field are filesystem specific, exccept that |
| * filesystems must not use the values '0' or '0xff'. 'See enum fid_type' |
| * in include/linux/exportfs.h for currently registered values. |
| */ |
| |
| struct knfsd_fh { |
| unsigned int fh_size; /* |
| * Points to the current size while |
| * building a new file handle. |
| */ |
| union { |
| char fh_raw[NFS4_FHSIZE]; |
| struct { |
| u8 fh_version; /* == 1 */ |
| u8 fh_auth_type; /* deprecated */ |
| u8 fh_fsid_type; |
| u8 fh_fileid_type; |
| u32 fh_fsid[]; /* flexible-array member */ |
| }; |
| }; |
| }; |
| |
| static inline __u32 ino_t_to_u32(ino_t ino) |
| { |
| return (__u32) ino; |
| } |
| |
| static inline ino_t u32_to_ino_t(__u32 uino) |
| { |
| return (ino_t) uino; |
| } |
| |
| /* |
| * This is the internal representation of an NFS handle used in knfsd. |
| * pre_mtime/post_version will be used to support wcc_attr's in NFSv3. |
| */ |
| typedef struct svc_fh { |
| struct knfsd_fh fh_handle; /* FH data */ |
| int fh_maxsize; /* max size for fh_handle */ |
| struct dentry * fh_dentry; /* validated dentry */ |
| struct svc_export * fh_export; /* export pointer */ |
| |
| bool fh_want_write; /* remount protection taken */ |
| bool fh_no_wcc; /* no wcc data needed */ |
| bool fh_no_atomic_attr; |
| /* |
| * wcc data is not atomic with |
| * operation |
| */ |
| int fh_flags; /* FH flags */ |
| bool fh_post_saved; /* post-op attrs saved */ |
| bool fh_pre_saved; /* pre-op attrs saved */ |
| |
| /* Pre-op attributes saved when inode is locked */ |
| __u64 fh_pre_size; /* size before operation */ |
| struct timespec64 fh_pre_mtime; /* mtime before oper */ |
| struct timespec64 fh_pre_ctime; /* ctime before oper */ |
| /* |
| * pre-op nfsv4 change attr: note must check IS_I_VERSION(inode) |
| * to find out if it is valid. |
| */ |
| u64 fh_pre_change; |
| |
| /* Post-op attributes saved in fh_fill_post_attrs() */ |
| struct kstat fh_post_attr; /* full attrs after operation */ |
| u64 fh_post_change; /* nfsv4 change; see above */ |
| } svc_fh; |
| #define NFSD4_FH_FOREIGN (1<<0) |
| #define SET_FH_FLAG(c, f) ((c)->fh_flags |= (f)) |
| #define HAS_FH_FLAG(c, f) ((c)->fh_flags & (f)) |
| |
| enum nfsd_fsid { |
| FSID_DEV = 0, |
| FSID_NUM, |
| FSID_MAJOR_MINOR, |
| FSID_ENCODE_DEV, |
| FSID_UUID4_INUM, |
| FSID_UUID8, |
| FSID_UUID16, |
| FSID_UUID16_INUM, |
| }; |
| |
| enum fsid_source { |
| FSIDSOURCE_DEV, |
| FSIDSOURCE_FSID, |
| FSIDSOURCE_UUID, |
| }; |
| extern enum fsid_source fsid_source(const struct svc_fh *fhp); |
| |
| |
| /* |
| * This might look a little large to "inline" but in all calls except |
| * one, 'vers' is constant so moste of the function disappears. |
| * |
| * In some cases the values are considered to be host endian and in |
| * others, net endian. fsidv is always considered to be u32 as the |
| * callers don't know which it will be. So we must use __force to keep |
| * sparse from complaining. Since these values are opaque to the |
| * client, that shouldn't be a problem. |
| */ |
| static inline void mk_fsid(int vers, u32 *fsidv, dev_t dev, ino_t ino, |
| u32 fsid, unsigned char *uuid) |
| { |
| u32 *up; |
| switch(vers) { |
| case FSID_DEV: |
| fsidv[0] = (__force __u32)htonl((MAJOR(dev)<<16) | |
| MINOR(dev)); |
| fsidv[1] = ino_t_to_u32(ino); |
| break; |
| case FSID_NUM: |
| fsidv[0] = fsid; |
| break; |
| case FSID_MAJOR_MINOR: |
| fsidv[0] = (__force __u32)htonl(MAJOR(dev)); |
| fsidv[1] = (__force __u32)htonl(MINOR(dev)); |
| fsidv[2] = ino_t_to_u32(ino); |
| break; |
| |
| case FSID_ENCODE_DEV: |
| fsidv[0] = new_encode_dev(dev); |
| fsidv[1] = ino_t_to_u32(ino); |
| break; |
| |
| case FSID_UUID4_INUM: |
| /* 4 byte fsid and inode number */ |
| up = (u32*)uuid; |
| fsidv[0] = ino_t_to_u32(ino); |
| fsidv[1] = up[0] ^ up[1] ^ up[2] ^ up[3]; |
| break; |
| |
| case FSID_UUID8: |
| /* 8 byte fsid */ |
| up = (u32*)uuid; |
| fsidv[0] = up[0] ^ up[2]; |
| fsidv[1] = up[1] ^ up[3]; |
| break; |
| |
| case FSID_UUID16: |
| /* 16 byte fsid - NFSv3+ only */ |
| memcpy(fsidv, uuid, 16); |
| break; |
| |
| case FSID_UUID16_INUM: |
| /* 8 byte inode and 16 byte fsid */ |
| *(u64*)fsidv = (u64)ino; |
| memcpy(fsidv+2, uuid, 16); |
| break; |
| default: BUG(); |
| } |
| } |
| |
| static inline int key_len(int type) |
| { |
| switch(type) { |
| case FSID_DEV: return 8; |
| case FSID_NUM: return 4; |
| case FSID_MAJOR_MINOR: return 12; |
| case FSID_ENCODE_DEV: return 8; |
| case FSID_UUID4_INUM: return 8; |
| case FSID_UUID8: return 8; |
| case FSID_UUID16: return 16; |
| case FSID_UUID16_INUM: return 24; |
| default: return 0; |
| } |
| } |
| |
| /* |
| * Shorthand for dprintk()'s |
| */ |
| extern char * SVCFH_fmt(struct svc_fh *fhp); |
| |
| /* |
| * Function prototypes |
| */ |
| __be32 fh_verify(struct svc_rqst *, struct svc_fh *, umode_t, int); |
| __be32 fh_compose(struct svc_fh *, struct svc_export *, struct dentry *, struct svc_fh *); |
| __be32 fh_update(struct svc_fh *); |
| void fh_put(struct svc_fh *); |
| |
| static __inline__ struct svc_fh * |
| fh_copy(struct svc_fh *dst, struct svc_fh *src) |
| { |
| WARN_ON(src->fh_dentry); |
| |
| *dst = *src; |
| return dst; |
| } |
| |
| static inline void |
| fh_copy_shallow(struct knfsd_fh *dst, struct knfsd_fh *src) |
| { |
| dst->fh_size = src->fh_size; |
| memcpy(&dst->fh_raw, &src->fh_raw, src->fh_size); |
| } |
| |
| static __inline__ struct svc_fh * |
| fh_init(struct svc_fh *fhp, int maxsize) |
| { |
| memset(fhp, 0, sizeof(*fhp)); |
| fhp->fh_maxsize = maxsize; |
| return fhp; |
| } |
| |
| static inline bool fh_match(struct knfsd_fh *fh1, struct knfsd_fh *fh2) |
| { |
| if (fh1->fh_size != fh2->fh_size) |
| return false; |
| if (memcmp(fh1->fh_raw, fh2->fh_raw, fh1->fh_size) != 0) |
| return false; |
| return true; |
| } |
| |
| static inline bool fh_fsid_match(struct knfsd_fh *fh1, struct knfsd_fh *fh2) |
| { |
| if (fh1->fh_fsid_type != fh2->fh_fsid_type) |
| return false; |
| if (memcmp(fh1->fh_fsid, fh2->fh_fsid, key_len(fh1->fh_fsid_type)) != 0) |
| return false; |
| return true; |
| } |
| |
| #ifdef CONFIG_CRC32 |
| /** |
| * knfsd_fh_hash - calculate the crc32 hash for the filehandle |
| * @fh - pointer to filehandle |
| * |
| * returns a crc32 hash for the filehandle that is compatible with |
| * the one displayed by "wireshark". |
| */ |
| static inline u32 knfsd_fh_hash(const struct knfsd_fh *fh) |
| { |
| return ~crc32_le(0xFFFFFFFF, fh->fh_raw, fh->fh_size); |
| } |
| #else |
| static inline u32 knfsd_fh_hash(const struct knfsd_fh *fh) |
| { |
| return 0; |
| } |
| #endif |
| |
| /** |
| * fh_clear_pre_post_attrs - Reset pre/post attributes |
| * @fhp: file handle to be updated |
| * |
| */ |
| static inline void fh_clear_pre_post_attrs(struct svc_fh *fhp) |
| { |
| fhp->fh_post_saved = false; |
| fhp->fh_pre_saved = false; |
| } |
| |
| /* |
| * We could use i_version alone as the change attribute. However, |
| * i_version can go backwards after a reboot. On its own that doesn't |
| * necessarily cause a problem, but if i_version goes backwards and then |
| * is incremented again it could reuse a value that was previously used |
| * before boot, and a client who queried the two values might |
| * incorrectly assume nothing changed. |
| * |
| * By using both ctime and the i_version counter we guarantee that as |
| * long as time doesn't go backwards we never reuse an old value. |
| */ |
| static inline u64 nfsd4_change_attribute(struct kstat *stat, |
| struct inode *inode) |
| { |
| if (inode->i_sb->s_export_op->fetch_iversion) |
| return inode->i_sb->s_export_op->fetch_iversion(inode); |
| else if (IS_I_VERSION(inode)) { |
| u64 chattr; |
| |
| chattr = stat->ctime.tv_sec; |
| chattr <<= 30; |
| chattr += stat->ctime.tv_nsec; |
| chattr += inode_query_iversion(inode); |
| return chattr; |
| } else |
| return time_to_chattr(&stat->ctime); |
| } |
| |
| extern void fh_fill_pre_attrs(struct svc_fh *fhp); |
| extern void fh_fill_post_attrs(struct svc_fh *fhp); |
| extern void fh_fill_both_attrs(struct svc_fh *fhp); |
| #endif /* _LINUX_NFSD_NFSFH_H */ |