| /* | |
| * Marvell Orion SoC timer handling. | |
| * | |
| * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> | |
| * | |
| * This file is licensed under the terms of the GNU General Public | |
| * License version 2. This program is licensed "as is" without any | |
| * warranty of any kind, whether express or implied. | |
| * | |
| * Timer 0 is used as free-running clocksource, while timer 1 is | |
| * used as clock_event_device. | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/bitops.h> | |
| #include <linux/clk.h> | |
| #include <linux/clockchips.h> | |
| #include <linux/delay.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/of_address.h> | |
| #include <linux/of_irq.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/sched_clock.h> | |
| #define TIMER_CTRL 0x00 | |
| #define TIMER0_EN BIT(0) | |
| #define TIMER0_RELOAD_EN BIT(1) | |
| #define TIMER1_EN BIT(2) | |
| #define TIMER1_RELOAD_EN BIT(3) | |
| #define TIMER0_RELOAD 0x10 | |
| #define TIMER0_VAL 0x14 | |
| #define TIMER1_RELOAD 0x18 | |
| #define TIMER1_VAL 0x1c | |
| #define ORION_ONESHOT_MIN 1 | |
| #define ORION_ONESHOT_MAX 0xfffffffe | |
| static void __iomem *timer_base; | |
| static unsigned long notrace orion_read_timer(void) | |
| { | |
| return ~readl(timer_base + TIMER0_VAL); | |
| } | |
| static struct delay_timer orion_delay_timer = { | |
| .read_current_timer = orion_read_timer, | |
| }; | |
| static void orion_delay_timer_init(unsigned long rate) | |
| { | |
| orion_delay_timer.freq = rate; | |
| register_current_timer_delay(&orion_delay_timer); | |
| } | |
| /* | |
| * Free-running clocksource handling. | |
| */ | |
| static u64 notrace orion_read_sched_clock(void) | |
| { | |
| return ~readl(timer_base + TIMER0_VAL); | |
| } | |
| /* | |
| * Clockevent handling. | |
| */ | |
| static u32 ticks_per_jiffy; | |
| static int orion_clkevt_next_event(unsigned long delta, | |
| struct clock_event_device *dev) | |
| { | |
| /* setup and enable one-shot timer */ | |
| writel(delta, timer_base + TIMER1_VAL); | |
| atomic_io_modify(timer_base + TIMER_CTRL, | |
| TIMER1_RELOAD_EN | TIMER1_EN, TIMER1_EN); | |
| return 0; | |
| } | |
| static int orion_clkevt_shutdown(struct clock_event_device *dev) | |
| { | |
| /* disable timer */ | |
| atomic_io_modify(timer_base + TIMER_CTRL, | |
| TIMER1_RELOAD_EN | TIMER1_EN, 0); | |
| return 0; | |
| } | |
| static int orion_clkevt_set_periodic(struct clock_event_device *dev) | |
| { | |
| /* setup and enable periodic timer at 1/HZ intervals */ | |
| writel(ticks_per_jiffy - 1, timer_base + TIMER1_RELOAD); | |
| writel(ticks_per_jiffy - 1, timer_base + TIMER1_VAL); | |
| atomic_io_modify(timer_base + TIMER_CTRL, | |
| TIMER1_RELOAD_EN | TIMER1_EN, | |
| TIMER1_RELOAD_EN | TIMER1_EN); | |
| return 0; | |
| } | |
| static struct clock_event_device orion_clkevt = { | |
| .name = "orion_event", | |
| .features = CLOCK_EVT_FEAT_ONESHOT | | |
| CLOCK_EVT_FEAT_PERIODIC, | |
| .shift = 32, | |
| .rating = 300, | |
| .set_next_event = orion_clkevt_next_event, | |
| .set_state_shutdown = orion_clkevt_shutdown, | |
| .set_state_periodic = orion_clkevt_set_periodic, | |
| .set_state_oneshot = orion_clkevt_shutdown, | |
| .tick_resume = orion_clkevt_shutdown, | |
| }; | |
| static irqreturn_t orion_clkevt_irq_handler(int irq, void *dev_id) | |
| { | |
| orion_clkevt.event_handler(&orion_clkevt); | |
| return IRQ_HANDLED; | |
| } | |
| static int __init orion_timer_init(struct device_node *np) | |
| { | |
| unsigned long rate; | |
| struct clk *clk; | |
| int irq, ret; | |
| /* timer registers are shared with watchdog timer */ | |
| timer_base = of_iomap(np, 0); | |
| if (!timer_base) { | |
| pr_err("%pOFn: unable to map resource\n", np); | |
| return -ENXIO; | |
| } | |
| clk = of_clk_get(np, 0); | |
| if (IS_ERR(clk)) { | |
| pr_err("%pOFn: unable to get clk\n", np); | |
| return PTR_ERR(clk); | |
| } | |
| ret = clk_prepare_enable(clk); | |
| if (ret) { | |
| pr_err("Failed to prepare clock\n"); | |
| return ret; | |
| } | |
| /* we are only interested in timer1 irq */ | |
| irq = irq_of_parse_and_map(np, 1); | |
| if (irq <= 0) { | |
| pr_err("%pOFn: unable to parse timer1 irq\n", np); | |
| ret = -EINVAL; | |
| goto out_unprep_clk; | |
| } | |
| rate = clk_get_rate(clk); | |
| /* setup timer0 as free-running clocksource */ | |
| writel(~0, timer_base + TIMER0_VAL); | |
| writel(~0, timer_base + TIMER0_RELOAD); | |
| atomic_io_modify(timer_base + TIMER_CTRL, | |
| TIMER0_RELOAD_EN | TIMER0_EN, | |
| TIMER0_RELOAD_EN | TIMER0_EN); | |
| ret = clocksource_mmio_init(timer_base + TIMER0_VAL, | |
| "orion_clocksource", rate, 300, 32, | |
| clocksource_mmio_readl_down); | |
| if (ret) { | |
| pr_err("Failed to initialize mmio timer\n"); | |
| goto out_unprep_clk; | |
| } | |
| sched_clock_register(orion_read_sched_clock, 32, rate); | |
| /* setup timer1 as clockevent timer */ | |
| ret = request_irq(irq, orion_clkevt_irq_handler, IRQF_TIMER, | |
| "orion_event", NULL); | |
| if (ret) { | |
| pr_err("%pOFn: unable to setup irq\n", np); | |
| goto out_unprep_clk; | |
| } | |
| ticks_per_jiffy = (clk_get_rate(clk) + HZ/2) / HZ; | |
| orion_clkevt.cpumask = cpumask_of(0); | |
| orion_clkevt.irq = irq; | |
| clockevents_config_and_register(&orion_clkevt, rate, | |
| ORION_ONESHOT_MIN, ORION_ONESHOT_MAX); | |
| orion_delay_timer_init(rate); | |
| return 0; | |
| out_unprep_clk: | |
| clk_disable_unprepare(clk); | |
| return ret; | |
| } | |
| TIMER_OF_DECLARE(orion_timer, "marvell,orion-timer", orion_timer_init); |