blob: 8c28848b226a03074a8353b0382d30fbeafbb739 [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
# Copyright (c) 2022 STMicroelectronics SA.
%YAML 1.2
---
$id: http://devicetree.org/schemas/media/i2c/st,st-vgxy61.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: STMicroelectronics VGxy61 HDR Global Shutter Sensor Family
maintainers:
- Benjamin Mugnier <benjamin.mugnier@foss.st.com>
- Sylvain Petinot <sylvain.petinot@foss.st.com>
description: |-
STMicroelectronics VGxy61 family has a CSI-2 output port. CSI-2 output is a
quad lanes 800Mbps per lane.
Supported formats are RAW8, RAW10, RAW12, RAW14 and RAW16.
Following part number are supported
- VG5661 and VG6661 are 1.6 Mpx (1464 x 1104) monochrome and color sensors.
Maximum frame rate is 75 fps.
- VG5761 and VG6761 are 2.3 Mpx (1944 x 1204) monochrome and color sensors.
Maximum frame rate is 60 fps.
properties:
compatible:
const: st,st-vgxy61
reg:
maxItems: 1
clocks:
maxItems: 1
VCORE-supply:
description:
Sensor digital core supply. Must be 1.2 volts.
VDDIO-supply:
description:
Sensor digital IO supply. Must be 1.8 volts.
VANA-supply:
description:
Sensor analog supply. Must be 2.8 volts.
reset-gpios:
description:
Reference to the GPIO connected to the reset pin, if any.
This is an active low signal to the vgxy61.
st,strobe-gpios-polarity:
description:
Invert polarity of illuminator's lights strobe GPIOs.
These GPIOs directly drive the illuminator LEDs.
type: boolean
port:
$ref: /schemas/graph.yaml#/$defs/port-base
additionalProperties: false
properties:
endpoint:
$ref: /schemas/media/video-interfaces.yaml#
unevaluatedProperties: false
properties:
data-lanes:
description:
CSI lanes to use
items:
- const: 1
- const: 2
- const: 3
- const: 4
remote-endpoint: true
required:
- data-lanes
required:
- compatible
- clocks
- VCORE-supply
- VDDIO-supply
- VANA-supply
- port
additionalProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
vgxy61: csi2tx@10 {
compatible = "st,st-vgxy61";
reg = <0x10>;
clocks = <&clk_ext_camera>;
VCORE-supply = <&v1v2>;
VDDIO-supply = <&v1v8>;
VANA-supply = <&v2v8>;
reset-gpios = <&mfxgpio 18 GPIO_ACTIVE_LOW>;
port {
ep0: endpoint {
data-lanes = <1 2 3 4>;
remote-endpoint = <&mipi_csi2_out>;
};
};
};
};
...