blob: 1571024aa11903a0cc2c192eaf455707ad0f0f7e [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/mtd/brcm,brcmnand.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Broadcom STB NAND Controller
maintainers:
- Brian Norris <computersforpeace@gmail.com>
- Kamal Dasu <kdasu.kdev@gmail.com>
description: |
The Broadcom Set-Top Box NAND controller supports low-level access to raw NAND
flash chips. It has a memory-mapped register interface for both control
registers and for its data input/output buffer. On some SoCs, this controller
is paired with a custom DMA engine (inventively named "Flash DMA") which
supports basic PROGRAM and READ functions, among other features.
This controller was originally designed for STB SoCs (BCM7xxx) but is now
available on a variety of Broadcom SoCs, including some BCM3xxx, BCM63xx, and
iProc/Cygnus. Its history includes several similar (but not fully register
compatible) versions.
-- Additional SoC-specific NAND controller properties --
The NAND controller is integrated differently on the variety of SoCs on which
it is found. Part of this integration involves providing status and enable
bits with which to control the 8 exposed NAND interrupts, as well as hardware
for configuring the endianness of the data bus. On some SoCs, these features
are handled via standard, modular components (e.g., their interrupts look like
a normal IRQ chip), but on others, they are controlled in unique and
interesting ways, sometimes with registers that lump multiple NAND-related
functions together. The former case can be described simply by the standard
interrupts properties in the main controller node. But for the latter
exceptional cases, we define additional 'compatible' properties and associated
register resources within the NAND controller node above.
properties:
compatible:
oneOf:
- items:
- enum:
- brcm,brcmnand-v2.1
- brcm,brcmnand-v2.2
- brcm,brcmnand-v4.0
- brcm,brcmnand-v5.0
- brcm,brcmnand-v6.0
- brcm,brcmnand-v6.1
- brcm,brcmnand-v6.2
- brcm,brcmnand-v7.0
- brcm,brcmnand-v7.1
- brcm,brcmnand-v7.2
- brcm,brcmnand-v7.3
- const: brcm,brcmnand
- description: BCM63138 SoC-specific NAND controller
items:
- const: brcm,nand-bcm63138
- enum:
- brcm,brcmnand-v7.0
- brcm,brcmnand-v7.1
- const: brcm,brcmnand
- description: iProc SoC-specific NAND controller
items:
- const: brcm,nand-iproc
- const: brcm,brcmnand-v6.1
- const: brcm,brcmnand
- description: BCM63168 SoC-specific NAND controller
items:
- const: brcm,nand-bcm63168
- const: brcm,nand-bcm6368
- const: brcm,brcmnand-v4.0
- const: brcm,brcmnand
reg:
minItems: 1
maxItems: 6
reg-names:
minItems: 1
maxItems: 6
items:
enum: [ nand, flash-dma, flash-edu, nand-cache, nand-int-base, iproc-idm, iproc-ext ]
interrupts:
minItems: 1
items:
- description: NAND CTLRDY interrupt
- description: FLASH_DMA_DONE (if flash DMA is available) or FLASH_EDU_DONE (if EDU is available)
interrupt-names:
minItems: 1
items:
- const: nand_ctlrdy
- enum:
- flash_dma_done
- flash_edu_done
clocks:
maxItems: 1
description: reference to the clock for the NAND controller
clock-names:
const: nand
brcm,nand-has-wp:
description: >
Some versions of this IP include a write-protect
(WP) control bit. It is always available on >=
v7.0. Use this property to describe the rare
earlier versions of this core that include WP
type: boolean
patternProperties:
"^nand@[a-f0-9]$":
type: object
properties:
compatible:
const: brcm,nandcs
nand-ecc-step-size:
enum: [ 512, 1024 ]
brcm,nand-oob-sector-size:
description: |
integer, to denote the spare area sector size
expected for the ECC layout in use. This size, in
addition to the strength and step-size,
determines how the hardware BCH engine will lay
out the parity bytes it stores on the flash.
This property can be automatically determined by
the flash geometry (particularly the NAND page
and OOB size) in many cases, but when booting
from NAND, the boot controller has only a limited
number of available options for its default ECC
layout.
$ref: /schemas/types.yaml#/definitions/uint32
allOf:
- $ref: nand-controller.yaml#
- if:
properties:
compatible:
contains:
const: brcm,nand-bcm63138
then:
properties:
reg-names:
items:
- const: nand
- const: nand-int-base
- if:
properties:
compatible:
contains:
const: brcm,nand-bcm6368
then:
properties:
reg-names:
items:
- const: nand
- const: nand-int-base
- const: nand-cache
- if:
properties:
compatible:
contains:
const: brcm,nand-iproc
then:
properties:
reg-names:
items:
- const: nand
- const: iproc-idm
- const: iproc-ext
- if:
properties:
interrupts:
minItems: 2
then:
required:
- interrupt-names
unevaluatedProperties: false
required:
- reg
- reg-names
- interrupts
examples:
- |
nand-controller@f0442800 {
compatible = "brcm,brcmnand-v7.0", "brcm,brcmnand";
reg = <0xf0442800 0x600>,
<0xf0443000 0x100>;
reg-names = "nand", "flash-dma";
interrupt-parent = <&hif_intr2_intc>;
interrupts = <24>, <4>;
interrupt-names = "nand_ctlrdy", "flash_dma_done";
#address-cells = <1>;
#size-cells = <0>;
nand@1 {
compatible = "brcm,nandcs";
reg = <1>; // Chip select 1
nand-on-flash-bbt;
nand-ecc-strength = <12>;
nand-ecc-step-size = <512>;
#address-cells = <1>;
#size-cells = <1>;
};
};
- |
nand-controller@10000200 {
compatible = "brcm,nand-bcm63168", "brcm,nand-bcm6368",
"brcm,brcmnand-v4.0", "brcm,brcmnand";
reg = <0x10000200 0x180>,
<0x100000b0 0x10>,
<0x10000600 0x200>;
reg-names = "nand", "nand-int-base", "nand-cache";
interrupt-parent = <&periph_intc>;
interrupts = <50>;
clocks = <&periph_clk 20>;
clock-names = "nand";
#address-cells = <1>;
#size-cells = <0>;
nand@0 {
compatible = "brcm,nandcs";
reg = <0>;
nand-on-flash-bbt;
nand-ecc-strength = <1>;
nand-ecc-step-size = <512>;
#address-cells = <1>;
#size-cells = <1>;
};
};