blob: 53da2edd7c9abef7d13c588af2fbb63a17d509eb [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pci/toshiba,visconti-pcie.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Toshiba Visconti5 SoC PCIe Host Controller
maintainers:
- Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
description:
Toshiba Visconti5 SoC PCIe host controller is based on the Synopsys DesignWare PCIe IP.
allOf:
- $ref: /schemas/pci/snps,dw-pcie.yaml#
properties:
compatible:
const: toshiba,visconti-pcie
reg:
items:
- description: Data Bus Interface (DBI) registers.
- description: PCIe configuration space region.
- description: Visconti specific additional registers.
- description: Visconti specific SMU registers
- description: Visconti specific memory protection unit registers (MPU)
reg-names:
items:
- const: dbi
- const: config
- const: ulreg
- const: smu
- const: mpu
interrupts:
maxItems: 2
clocks:
items:
- description: PCIe reference clock
- description: PCIe system clock
- description: Auxiliary clock
clock-names:
items:
- const: ref
- const: core
- const: aux
num-lanes:
const: 2
required:
- reg
- reg-names
- interrupts
- "#interrupt-cells"
- interrupt-map
- interrupt-map-mask
- num-lanes
- clocks
- clock-names
- max-link-speed
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
soc {
#address-cells = <2>;
#size-cells = <2>;
pcie: pcie@28400000 {
compatible = "toshiba,visconti-pcie";
reg = <0x0 0x28400000 0x0 0x00400000>,
<0x0 0x70000000 0x0 0x10000000>,
<0x0 0x28050000 0x0 0x00010000>,
<0x0 0x24200000 0x0 0x00002000>,
<0x0 0x24162000 0x0 0x00001000>;
reg-names = "dbi", "config", "ulreg", "smu", "mpu";
device_type = "pci";
bus-range = <0x00 0xff>;
num-lanes = <2>;
num-viewport = <8>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x81000000 0 0x40000000 0 0x40000000 0 0x00010000>,
<0x82000000 0 0x50000000 0 0x50000000 0 0x20000000>;
interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi", "intr";
interrupt-map-mask = <0 0 0 7>;
interrupt-map =
<0 0 0 1 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH
0 0 0 2 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH
0 0 0 3 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH
0 0 0 4 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&extclk100mhz>, <&clk600mhz>, <&clk25mhz>;
clock-names = "ref", "core", "aux";
max-link-speed = <2>;
};
};
...