|  | // SPDX-License-Identifier: GPL-2.0 | 
|  | /* | 
|  | * This file contains functions which emulate a local clock-event | 
|  | * device via a broadcast event source. | 
|  | * | 
|  | * Copyright(C) 2005-2006, Thomas Gleixner <tglx@linutronix.de> | 
|  | * Copyright(C) 2005-2007, Red Hat, Inc., Ingo Molnar | 
|  | * Copyright(C) 2006-2007, Timesys Corp., Thomas Gleixner | 
|  | */ | 
|  | #include <linux/cpu.h> | 
|  | #include <linux/err.h> | 
|  | #include <linux/hrtimer.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/percpu.h> | 
|  | #include <linux/profile.h> | 
|  | #include <linux/sched.h> | 
|  | #include <linux/smp.h> | 
|  | #include <linux/module.h> | 
|  |  | 
|  | #include "tick-internal.h" | 
|  |  | 
|  | /* | 
|  | * Broadcast support for broken x86 hardware, where the local apic | 
|  | * timer stops in C3 state. | 
|  | */ | 
|  |  | 
|  | static struct tick_device tick_broadcast_device; | 
|  | static cpumask_var_t tick_broadcast_mask __cpumask_var_read_mostly; | 
|  | static cpumask_var_t tick_broadcast_on __cpumask_var_read_mostly; | 
|  | static cpumask_var_t tmpmask __cpumask_var_read_mostly; | 
|  | static int tick_broadcast_forced; | 
|  |  | 
|  | static __cacheline_aligned_in_smp DEFINE_RAW_SPINLOCK(tick_broadcast_lock); | 
|  |  | 
|  | #ifdef CONFIG_TICK_ONESHOT | 
|  | static void tick_broadcast_setup_oneshot(struct clock_event_device *bc); | 
|  | static void tick_broadcast_clear_oneshot(int cpu); | 
|  | static void tick_resume_broadcast_oneshot(struct clock_event_device *bc); | 
|  | # ifdef CONFIG_HOTPLUG_CPU | 
|  | static void tick_broadcast_oneshot_offline(unsigned int cpu); | 
|  | # endif | 
|  | #else | 
|  | static inline void tick_broadcast_setup_oneshot(struct clock_event_device *bc) { BUG(); } | 
|  | static inline void tick_broadcast_clear_oneshot(int cpu) { } | 
|  | static inline void tick_resume_broadcast_oneshot(struct clock_event_device *bc) { } | 
|  | # ifdef CONFIG_HOTPLUG_CPU | 
|  | static inline void tick_broadcast_oneshot_offline(unsigned int cpu) { } | 
|  | # endif | 
|  | #endif | 
|  |  | 
|  | /* | 
|  | * Debugging: see timer_list.c | 
|  | */ | 
|  | struct tick_device *tick_get_broadcast_device(void) | 
|  | { | 
|  | return &tick_broadcast_device; | 
|  | } | 
|  |  | 
|  | struct cpumask *tick_get_broadcast_mask(void) | 
|  | { | 
|  | return tick_broadcast_mask; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Start the device in periodic mode | 
|  | */ | 
|  | static void tick_broadcast_start_periodic(struct clock_event_device *bc) | 
|  | { | 
|  | if (bc) | 
|  | tick_setup_periodic(bc, 1); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Check, if the device can be utilized as broadcast device: | 
|  | */ | 
|  | static bool tick_check_broadcast_device(struct clock_event_device *curdev, | 
|  | struct clock_event_device *newdev) | 
|  | { | 
|  | if ((newdev->features & CLOCK_EVT_FEAT_DUMMY) || | 
|  | (newdev->features & CLOCK_EVT_FEAT_PERCPU) || | 
|  | (newdev->features & CLOCK_EVT_FEAT_C3STOP)) | 
|  | return false; | 
|  |  | 
|  | if (tick_broadcast_device.mode == TICKDEV_MODE_ONESHOT && | 
|  | !(newdev->features & CLOCK_EVT_FEAT_ONESHOT)) | 
|  | return false; | 
|  |  | 
|  | return !curdev || newdev->rating > curdev->rating; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Conditionally install/replace broadcast device | 
|  | */ | 
|  | void tick_install_broadcast_device(struct clock_event_device *dev) | 
|  | { | 
|  | struct clock_event_device *cur = tick_broadcast_device.evtdev; | 
|  |  | 
|  | if (!tick_check_broadcast_device(cur, dev)) | 
|  | return; | 
|  |  | 
|  | if (!try_module_get(dev->owner)) | 
|  | return; | 
|  |  | 
|  | clockevents_exchange_device(cur, dev); | 
|  | if (cur) | 
|  | cur->event_handler = clockevents_handle_noop; | 
|  | tick_broadcast_device.evtdev = dev; | 
|  | if (!cpumask_empty(tick_broadcast_mask)) | 
|  | tick_broadcast_start_periodic(dev); | 
|  | /* | 
|  | * Inform all cpus about this. We might be in a situation | 
|  | * where we did not switch to oneshot mode because the per cpu | 
|  | * devices are affected by CLOCK_EVT_FEAT_C3STOP and the lack | 
|  | * of a oneshot capable broadcast device. Without that | 
|  | * notification the systems stays stuck in periodic mode | 
|  | * forever. | 
|  | */ | 
|  | if (dev->features & CLOCK_EVT_FEAT_ONESHOT) | 
|  | tick_clock_notify(); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Check, if the device is the broadcast device | 
|  | */ | 
|  | int tick_is_broadcast_device(struct clock_event_device *dev) | 
|  | { | 
|  | return (dev && tick_broadcast_device.evtdev == dev); | 
|  | } | 
|  |  | 
|  | int tick_broadcast_update_freq(struct clock_event_device *dev, u32 freq) | 
|  | { | 
|  | int ret = -ENODEV; | 
|  |  | 
|  | if (tick_is_broadcast_device(dev)) { | 
|  | raw_spin_lock(&tick_broadcast_lock); | 
|  | ret = __clockevents_update_freq(dev, freq); | 
|  | raw_spin_unlock(&tick_broadcast_lock); | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  |  | 
|  | static void err_broadcast(const struct cpumask *mask) | 
|  | { | 
|  | pr_crit_once("Failed to broadcast timer tick. Some CPUs may be unresponsive.\n"); | 
|  | } | 
|  |  | 
|  | static void tick_device_setup_broadcast_func(struct clock_event_device *dev) | 
|  | { | 
|  | if (!dev->broadcast) | 
|  | dev->broadcast = tick_broadcast; | 
|  | if (!dev->broadcast) { | 
|  | pr_warn_once("%s depends on broadcast, but no broadcast function available\n", | 
|  | dev->name); | 
|  | dev->broadcast = err_broadcast; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Check, if the device is disfunctional and a place holder, which | 
|  | * needs to be handled by the broadcast device. | 
|  | */ | 
|  | int tick_device_uses_broadcast(struct clock_event_device *dev, int cpu) | 
|  | { | 
|  | struct clock_event_device *bc = tick_broadcast_device.evtdev; | 
|  | unsigned long flags; | 
|  | int ret = 0; | 
|  |  | 
|  | raw_spin_lock_irqsave(&tick_broadcast_lock, flags); | 
|  |  | 
|  | /* | 
|  | * Devices might be registered with both periodic and oneshot | 
|  | * mode disabled. This signals, that the device needs to be | 
|  | * operated from the broadcast device and is a placeholder for | 
|  | * the cpu local device. | 
|  | */ | 
|  | if (!tick_device_is_functional(dev)) { | 
|  | dev->event_handler = tick_handle_periodic; | 
|  | tick_device_setup_broadcast_func(dev); | 
|  | cpumask_set_cpu(cpu, tick_broadcast_mask); | 
|  | if (tick_broadcast_device.mode == TICKDEV_MODE_PERIODIC) | 
|  | tick_broadcast_start_periodic(bc); | 
|  | else | 
|  | tick_broadcast_setup_oneshot(bc); | 
|  | ret = 1; | 
|  | } else { | 
|  | /* | 
|  | * Clear the broadcast bit for this cpu if the | 
|  | * device is not power state affected. | 
|  | */ | 
|  | if (!(dev->features & CLOCK_EVT_FEAT_C3STOP)) | 
|  | cpumask_clear_cpu(cpu, tick_broadcast_mask); | 
|  | else | 
|  | tick_device_setup_broadcast_func(dev); | 
|  |  | 
|  | /* | 
|  | * Clear the broadcast bit if the CPU is not in | 
|  | * periodic broadcast on state. | 
|  | */ | 
|  | if (!cpumask_test_cpu(cpu, tick_broadcast_on)) | 
|  | cpumask_clear_cpu(cpu, tick_broadcast_mask); | 
|  |  | 
|  | switch (tick_broadcast_device.mode) { | 
|  | case TICKDEV_MODE_ONESHOT: | 
|  | /* | 
|  | * If the system is in oneshot mode we can | 
|  | * unconditionally clear the oneshot mask bit, | 
|  | * because the CPU is running and therefore | 
|  | * not in an idle state which causes the power | 
|  | * state affected device to stop. Let the | 
|  | * caller initialize the device. | 
|  | */ | 
|  | tick_broadcast_clear_oneshot(cpu); | 
|  | ret = 0; | 
|  | break; | 
|  |  | 
|  | case TICKDEV_MODE_PERIODIC: | 
|  | /* | 
|  | * If the system is in periodic mode, check | 
|  | * whether the broadcast device can be | 
|  | * switched off now. | 
|  | */ | 
|  | if (cpumask_empty(tick_broadcast_mask) && bc) | 
|  | clockevents_shutdown(bc); | 
|  | /* | 
|  | * If we kept the cpu in the broadcast mask, | 
|  | * tell the caller to leave the per cpu device | 
|  | * in shutdown state. The periodic interrupt | 
|  | * is delivered by the broadcast device, if | 
|  | * the broadcast device exists and is not | 
|  | * hrtimer based. | 
|  | */ | 
|  | if (bc && !(bc->features & CLOCK_EVT_FEAT_HRTIMER)) | 
|  | ret = cpumask_test_cpu(cpu, tick_broadcast_mask); | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  | } | 
|  | raw_spin_unlock_irqrestore(&tick_broadcast_lock, flags); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST | 
|  | int tick_receive_broadcast(void) | 
|  | { | 
|  | struct tick_device *td = this_cpu_ptr(&tick_cpu_device); | 
|  | struct clock_event_device *evt = td->evtdev; | 
|  |  | 
|  | if (!evt) | 
|  | return -ENODEV; | 
|  |  | 
|  | if (!evt->event_handler) | 
|  | return -EINVAL; | 
|  |  | 
|  | evt->event_handler(evt); | 
|  | return 0; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /* | 
|  | * Broadcast the event to the cpus, which are set in the mask (mangled). | 
|  | */ | 
|  | static bool tick_do_broadcast(struct cpumask *mask) | 
|  | { | 
|  | int cpu = smp_processor_id(); | 
|  | struct tick_device *td; | 
|  | bool local = false; | 
|  |  | 
|  | /* | 
|  | * Check, if the current cpu is in the mask | 
|  | */ | 
|  | if (cpumask_test_cpu(cpu, mask)) { | 
|  | struct clock_event_device *bc = tick_broadcast_device.evtdev; | 
|  |  | 
|  | cpumask_clear_cpu(cpu, mask); | 
|  | /* | 
|  | * We only run the local handler, if the broadcast | 
|  | * device is not hrtimer based. Otherwise we run into | 
|  | * a hrtimer recursion. | 
|  | * | 
|  | * local timer_interrupt() | 
|  | *   local_handler() | 
|  | *     expire_hrtimers() | 
|  | *       bc_handler() | 
|  | *         local_handler() | 
|  | *	     expire_hrtimers() | 
|  | */ | 
|  | local = !(bc->features & CLOCK_EVT_FEAT_HRTIMER); | 
|  | } | 
|  |  | 
|  | if (!cpumask_empty(mask)) { | 
|  | /* | 
|  | * It might be necessary to actually check whether the devices | 
|  | * have different broadcast functions. For now, just use the | 
|  | * one of the first device. This works as long as we have this | 
|  | * misfeature only on x86 (lapic) | 
|  | */ | 
|  | td = &per_cpu(tick_cpu_device, cpumask_first(mask)); | 
|  | td->evtdev->broadcast(mask); | 
|  | } | 
|  | return local; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Periodic broadcast: | 
|  | * - invoke the broadcast handlers | 
|  | */ | 
|  | static bool tick_do_periodic_broadcast(void) | 
|  | { | 
|  | cpumask_and(tmpmask, cpu_online_mask, tick_broadcast_mask); | 
|  | return tick_do_broadcast(tmpmask); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Event handler for periodic broadcast ticks | 
|  | */ | 
|  | static void tick_handle_periodic_broadcast(struct clock_event_device *dev) | 
|  | { | 
|  | struct tick_device *td = this_cpu_ptr(&tick_cpu_device); | 
|  | bool bc_local; | 
|  |  | 
|  | raw_spin_lock(&tick_broadcast_lock); | 
|  |  | 
|  | /* Handle spurious interrupts gracefully */ | 
|  | if (clockevent_state_shutdown(tick_broadcast_device.evtdev)) { | 
|  | raw_spin_unlock(&tick_broadcast_lock); | 
|  | return; | 
|  | } | 
|  |  | 
|  | bc_local = tick_do_periodic_broadcast(); | 
|  |  | 
|  | if (clockevent_state_oneshot(dev)) { | 
|  | ktime_t next = ktime_add_ns(dev->next_event, TICK_NSEC); | 
|  |  | 
|  | clockevents_program_event(dev, next, true); | 
|  | } | 
|  | raw_spin_unlock(&tick_broadcast_lock); | 
|  |  | 
|  | /* | 
|  | * We run the handler of the local cpu after dropping | 
|  | * tick_broadcast_lock because the handler might deadlock when | 
|  | * trying to switch to oneshot mode. | 
|  | */ | 
|  | if (bc_local) | 
|  | td->evtdev->event_handler(td->evtdev); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * tick_broadcast_control - Enable/disable or force broadcast mode | 
|  | * @mode:	The selected broadcast mode | 
|  | * | 
|  | * Called when the system enters a state where affected tick devices | 
|  | * might stop. Note: TICK_BROADCAST_FORCE cannot be undone. | 
|  | */ | 
|  | void tick_broadcast_control(enum tick_broadcast_mode mode) | 
|  | { | 
|  | struct clock_event_device *bc, *dev; | 
|  | struct tick_device *td; | 
|  | int cpu, bc_stopped; | 
|  | unsigned long flags; | 
|  |  | 
|  | /* Protects also the local clockevent device. */ | 
|  | raw_spin_lock_irqsave(&tick_broadcast_lock, flags); | 
|  | td = this_cpu_ptr(&tick_cpu_device); | 
|  | dev = td->evtdev; | 
|  |  | 
|  | /* | 
|  | * Is the device not affected by the powerstate ? | 
|  | */ | 
|  | if (!dev || !(dev->features & CLOCK_EVT_FEAT_C3STOP)) | 
|  | goto out; | 
|  |  | 
|  | if (!tick_device_is_functional(dev)) | 
|  | goto out; | 
|  |  | 
|  | cpu = smp_processor_id(); | 
|  | bc = tick_broadcast_device.evtdev; | 
|  | bc_stopped = cpumask_empty(tick_broadcast_mask); | 
|  |  | 
|  | switch (mode) { | 
|  | case TICK_BROADCAST_FORCE: | 
|  | tick_broadcast_forced = 1; | 
|  | fallthrough; | 
|  | case TICK_BROADCAST_ON: | 
|  | cpumask_set_cpu(cpu, tick_broadcast_on); | 
|  | if (!cpumask_test_and_set_cpu(cpu, tick_broadcast_mask)) { | 
|  | /* | 
|  | * Only shutdown the cpu local device, if: | 
|  | * | 
|  | * - the broadcast device exists | 
|  | * - the broadcast device is not a hrtimer based one | 
|  | * - the broadcast device is in periodic mode to | 
|  | *   avoid a hickup during switch to oneshot mode | 
|  | */ | 
|  | if (bc && !(bc->features & CLOCK_EVT_FEAT_HRTIMER) && | 
|  | tick_broadcast_device.mode == TICKDEV_MODE_PERIODIC) | 
|  | clockevents_shutdown(dev); | 
|  | } | 
|  | break; | 
|  |  | 
|  | case TICK_BROADCAST_OFF: | 
|  | if (tick_broadcast_forced) | 
|  | break; | 
|  | cpumask_clear_cpu(cpu, tick_broadcast_on); | 
|  | if (cpumask_test_and_clear_cpu(cpu, tick_broadcast_mask)) { | 
|  | if (tick_broadcast_device.mode == | 
|  | TICKDEV_MODE_PERIODIC) | 
|  | tick_setup_periodic(dev, 0); | 
|  | } | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (bc) { | 
|  | if (cpumask_empty(tick_broadcast_mask)) { | 
|  | if (!bc_stopped) | 
|  | clockevents_shutdown(bc); | 
|  | } else if (bc_stopped) { | 
|  | if (tick_broadcast_device.mode == TICKDEV_MODE_PERIODIC) | 
|  | tick_broadcast_start_periodic(bc); | 
|  | else | 
|  | tick_broadcast_setup_oneshot(bc); | 
|  | } | 
|  | } | 
|  | out: | 
|  | raw_spin_unlock_irqrestore(&tick_broadcast_lock, flags); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(tick_broadcast_control); | 
|  |  | 
|  | /* | 
|  | * Set the periodic handler depending on broadcast on/off | 
|  | */ | 
|  | void tick_set_periodic_handler(struct clock_event_device *dev, int broadcast) | 
|  | { | 
|  | if (!broadcast) | 
|  | dev->event_handler = tick_handle_periodic; | 
|  | else | 
|  | dev->event_handler = tick_handle_periodic_broadcast; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_HOTPLUG_CPU | 
|  | static void tick_shutdown_broadcast(void) | 
|  | { | 
|  | struct clock_event_device *bc = tick_broadcast_device.evtdev; | 
|  |  | 
|  | if (tick_broadcast_device.mode == TICKDEV_MODE_PERIODIC) { | 
|  | if (bc && cpumask_empty(tick_broadcast_mask)) | 
|  | clockevents_shutdown(bc); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Remove a CPU from broadcasting | 
|  | */ | 
|  | void tick_broadcast_offline(unsigned int cpu) | 
|  | { | 
|  | raw_spin_lock(&tick_broadcast_lock); | 
|  | cpumask_clear_cpu(cpu, tick_broadcast_mask); | 
|  | cpumask_clear_cpu(cpu, tick_broadcast_on); | 
|  | tick_broadcast_oneshot_offline(cpu); | 
|  | tick_shutdown_broadcast(); | 
|  | raw_spin_unlock(&tick_broadcast_lock); | 
|  | } | 
|  |  | 
|  | #endif | 
|  |  | 
|  | void tick_suspend_broadcast(void) | 
|  | { | 
|  | struct clock_event_device *bc; | 
|  | unsigned long flags; | 
|  |  | 
|  | raw_spin_lock_irqsave(&tick_broadcast_lock, flags); | 
|  |  | 
|  | bc = tick_broadcast_device.evtdev; | 
|  | if (bc) | 
|  | clockevents_shutdown(bc); | 
|  |  | 
|  | raw_spin_unlock_irqrestore(&tick_broadcast_lock, flags); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This is called from tick_resume_local() on a resuming CPU. That's | 
|  | * called from the core resume function, tick_unfreeze() and the magic XEN | 
|  | * resume hackery. | 
|  | * | 
|  | * In none of these cases the broadcast device mode can change and the | 
|  | * bit of the resuming CPU in the broadcast mask is safe as well. | 
|  | */ | 
|  | bool tick_resume_check_broadcast(void) | 
|  | { | 
|  | if (tick_broadcast_device.mode == TICKDEV_MODE_ONESHOT) | 
|  | return false; | 
|  | else | 
|  | return cpumask_test_cpu(smp_processor_id(), tick_broadcast_mask); | 
|  | } | 
|  |  | 
|  | void tick_resume_broadcast(void) | 
|  | { | 
|  | struct clock_event_device *bc; | 
|  | unsigned long flags; | 
|  |  | 
|  | raw_spin_lock_irqsave(&tick_broadcast_lock, flags); | 
|  |  | 
|  | bc = tick_broadcast_device.evtdev; | 
|  |  | 
|  | if (bc) { | 
|  | clockevents_tick_resume(bc); | 
|  |  | 
|  | switch (tick_broadcast_device.mode) { | 
|  | case TICKDEV_MODE_PERIODIC: | 
|  | if (!cpumask_empty(tick_broadcast_mask)) | 
|  | tick_broadcast_start_periodic(bc); | 
|  | break; | 
|  | case TICKDEV_MODE_ONESHOT: | 
|  | if (!cpumask_empty(tick_broadcast_mask)) | 
|  | tick_resume_broadcast_oneshot(bc); | 
|  | break; | 
|  | } | 
|  | } | 
|  | raw_spin_unlock_irqrestore(&tick_broadcast_lock, flags); | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_TICK_ONESHOT | 
|  |  | 
|  | static cpumask_var_t tick_broadcast_oneshot_mask __cpumask_var_read_mostly; | 
|  | static cpumask_var_t tick_broadcast_pending_mask __cpumask_var_read_mostly; | 
|  | static cpumask_var_t tick_broadcast_force_mask __cpumask_var_read_mostly; | 
|  |  | 
|  | /* | 
|  | * Exposed for debugging: see timer_list.c | 
|  | */ | 
|  | struct cpumask *tick_get_broadcast_oneshot_mask(void) | 
|  | { | 
|  | return tick_broadcast_oneshot_mask; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Called before going idle with interrupts disabled. Checks whether a | 
|  | * broadcast event from the other core is about to happen. We detected | 
|  | * that in tick_broadcast_oneshot_control(). The callsite can use this | 
|  | * to avoid a deep idle transition as we are about to get the | 
|  | * broadcast IPI right away. | 
|  | */ | 
|  | int tick_check_broadcast_expired(void) | 
|  | { | 
|  | return cpumask_test_cpu(smp_processor_id(), tick_broadcast_force_mask); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Set broadcast interrupt affinity | 
|  | */ | 
|  | static void tick_broadcast_set_affinity(struct clock_event_device *bc, | 
|  | const struct cpumask *cpumask) | 
|  | { | 
|  | if (!(bc->features & CLOCK_EVT_FEAT_DYNIRQ)) | 
|  | return; | 
|  |  | 
|  | if (cpumask_equal(bc->cpumask, cpumask)) | 
|  | return; | 
|  |  | 
|  | bc->cpumask = cpumask; | 
|  | irq_set_affinity(bc->irq, bc->cpumask); | 
|  | } | 
|  |  | 
|  | static void tick_broadcast_set_event(struct clock_event_device *bc, int cpu, | 
|  | ktime_t expires) | 
|  | { | 
|  | if (!clockevent_state_oneshot(bc)) | 
|  | clockevents_switch_state(bc, CLOCK_EVT_STATE_ONESHOT); | 
|  |  | 
|  | clockevents_program_event(bc, expires, 1); | 
|  | tick_broadcast_set_affinity(bc, cpumask_of(cpu)); | 
|  | } | 
|  |  | 
|  | static void tick_resume_broadcast_oneshot(struct clock_event_device *bc) | 
|  | { | 
|  | clockevents_switch_state(bc, CLOCK_EVT_STATE_ONESHOT); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Called from irq_enter() when idle was interrupted to reenable the | 
|  | * per cpu device. | 
|  | */ | 
|  | void tick_check_oneshot_broadcast_this_cpu(void) | 
|  | { | 
|  | if (cpumask_test_cpu(smp_processor_id(), tick_broadcast_oneshot_mask)) { | 
|  | struct tick_device *td = this_cpu_ptr(&tick_cpu_device); | 
|  |  | 
|  | /* | 
|  | * We might be in the middle of switching over from | 
|  | * periodic to oneshot. If the CPU has not yet | 
|  | * switched over, leave the device alone. | 
|  | */ | 
|  | if (td->mode == TICKDEV_MODE_ONESHOT) { | 
|  | clockevents_switch_state(td->evtdev, | 
|  | CLOCK_EVT_STATE_ONESHOT); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Handle oneshot mode broadcasting | 
|  | */ | 
|  | static void tick_handle_oneshot_broadcast(struct clock_event_device *dev) | 
|  | { | 
|  | struct tick_device *td; | 
|  | ktime_t now, next_event; | 
|  | int cpu, next_cpu = 0; | 
|  | bool bc_local; | 
|  |  | 
|  | raw_spin_lock(&tick_broadcast_lock); | 
|  | dev->next_event = KTIME_MAX; | 
|  | next_event = KTIME_MAX; | 
|  | cpumask_clear(tmpmask); | 
|  | now = ktime_get(); | 
|  | /* Find all expired events */ | 
|  | for_each_cpu(cpu, tick_broadcast_oneshot_mask) { | 
|  | /* | 
|  | * Required for !SMP because for_each_cpu() reports | 
|  | * unconditionally CPU0 as set on UP kernels. | 
|  | */ | 
|  | if (!IS_ENABLED(CONFIG_SMP) && | 
|  | cpumask_empty(tick_broadcast_oneshot_mask)) | 
|  | break; | 
|  |  | 
|  | td = &per_cpu(tick_cpu_device, cpu); | 
|  | if (td->evtdev->next_event <= now) { | 
|  | cpumask_set_cpu(cpu, tmpmask); | 
|  | /* | 
|  | * Mark the remote cpu in the pending mask, so | 
|  | * it can avoid reprogramming the cpu local | 
|  | * timer in tick_broadcast_oneshot_control(). | 
|  | */ | 
|  | cpumask_set_cpu(cpu, tick_broadcast_pending_mask); | 
|  | } else if (td->evtdev->next_event < next_event) { | 
|  | next_event = td->evtdev->next_event; | 
|  | next_cpu = cpu; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Remove the current cpu from the pending mask. The event is | 
|  | * delivered immediately in tick_do_broadcast() ! | 
|  | */ | 
|  | cpumask_clear_cpu(smp_processor_id(), tick_broadcast_pending_mask); | 
|  |  | 
|  | /* Take care of enforced broadcast requests */ | 
|  | cpumask_or(tmpmask, tmpmask, tick_broadcast_force_mask); | 
|  | cpumask_clear(tick_broadcast_force_mask); | 
|  |  | 
|  | /* | 
|  | * Sanity check. Catch the case where we try to broadcast to | 
|  | * offline cpus. | 
|  | */ | 
|  | if (WARN_ON_ONCE(!cpumask_subset(tmpmask, cpu_online_mask))) | 
|  | cpumask_and(tmpmask, tmpmask, cpu_online_mask); | 
|  |  | 
|  | /* | 
|  | * Wakeup the cpus which have an expired event. | 
|  | */ | 
|  | bc_local = tick_do_broadcast(tmpmask); | 
|  |  | 
|  | /* | 
|  | * Two reasons for reprogram: | 
|  | * | 
|  | * - The global event did not expire any CPU local | 
|  | * events. This happens in dyntick mode, as the maximum PIT | 
|  | * delta is quite small. | 
|  | * | 
|  | * - There are pending events on sleeping CPUs which were not | 
|  | * in the event mask | 
|  | */ | 
|  | if (next_event != KTIME_MAX) | 
|  | tick_broadcast_set_event(dev, next_cpu, next_event); | 
|  |  | 
|  | raw_spin_unlock(&tick_broadcast_lock); | 
|  |  | 
|  | if (bc_local) { | 
|  | td = this_cpu_ptr(&tick_cpu_device); | 
|  | td->evtdev->event_handler(td->evtdev); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int broadcast_needs_cpu(struct clock_event_device *bc, int cpu) | 
|  | { | 
|  | if (!(bc->features & CLOCK_EVT_FEAT_HRTIMER)) | 
|  | return 0; | 
|  | if (bc->next_event == KTIME_MAX) | 
|  | return 0; | 
|  | return bc->bound_on == cpu ? -EBUSY : 0; | 
|  | } | 
|  |  | 
|  | static void broadcast_shutdown_local(struct clock_event_device *bc, | 
|  | struct clock_event_device *dev) | 
|  | { | 
|  | /* | 
|  | * For hrtimer based broadcasting we cannot shutdown the cpu | 
|  | * local device if our own event is the first one to expire or | 
|  | * if we own the broadcast timer. | 
|  | */ | 
|  | if (bc->features & CLOCK_EVT_FEAT_HRTIMER) { | 
|  | if (broadcast_needs_cpu(bc, smp_processor_id())) | 
|  | return; | 
|  | if (dev->next_event < bc->next_event) | 
|  | return; | 
|  | } | 
|  | clockevents_switch_state(dev, CLOCK_EVT_STATE_SHUTDOWN); | 
|  | } | 
|  |  | 
|  | int __tick_broadcast_oneshot_control(enum tick_broadcast_state state) | 
|  | { | 
|  | struct clock_event_device *bc, *dev; | 
|  | int cpu, ret = 0; | 
|  | ktime_t now; | 
|  |  | 
|  | /* | 
|  | * If there is no broadcast device, tell the caller not to go | 
|  | * into deep idle. | 
|  | */ | 
|  | if (!tick_broadcast_device.evtdev) | 
|  | return -EBUSY; | 
|  |  | 
|  | dev = this_cpu_ptr(&tick_cpu_device)->evtdev; | 
|  |  | 
|  | raw_spin_lock(&tick_broadcast_lock); | 
|  | bc = tick_broadcast_device.evtdev; | 
|  | cpu = smp_processor_id(); | 
|  |  | 
|  | if (state == TICK_BROADCAST_ENTER) { | 
|  | /* | 
|  | * If the current CPU owns the hrtimer broadcast | 
|  | * mechanism, it cannot go deep idle and we do not add | 
|  | * the CPU to the broadcast mask. We don't have to go | 
|  | * through the EXIT path as the local timer is not | 
|  | * shutdown. | 
|  | */ | 
|  | ret = broadcast_needs_cpu(bc, cpu); | 
|  | if (ret) | 
|  | goto out; | 
|  |  | 
|  | /* | 
|  | * If the broadcast device is in periodic mode, we | 
|  | * return. | 
|  | */ | 
|  | if (tick_broadcast_device.mode == TICKDEV_MODE_PERIODIC) { | 
|  | /* If it is a hrtimer based broadcast, return busy */ | 
|  | if (bc->features & CLOCK_EVT_FEAT_HRTIMER) | 
|  | ret = -EBUSY; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (!cpumask_test_and_set_cpu(cpu, tick_broadcast_oneshot_mask)) { | 
|  | WARN_ON_ONCE(cpumask_test_cpu(cpu, tick_broadcast_pending_mask)); | 
|  |  | 
|  | /* Conditionally shut down the local timer. */ | 
|  | broadcast_shutdown_local(bc, dev); | 
|  |  | 
|  | /* | 
|  | * We only reprogram the broadcast timer if we | 
|  | * did not mark ourself in the force mask and | 
|  | * if the cpu local event is earlier than the | 
|  | * broadcast event. If the current CPU is in | 
|  | * the force mask, then we are going to be | 
|  | * woken by the IPI right away; we return | 
|  | * busy, so the CPU does not try to go deep | 
|  | * idle. | 
|  | */ | 
|  | if (cpumask_test_cpu(cpu, tick_broadcast_force_mask)) { | 
|  | ret = -EBUSY; | 
|  | } else if (dev->next_event < bc->next_event) { | 
|  | tick_broadcast_set_event(bc, cpu, dev->next_event); | 
|  | /* | 
|  | * In case of hrtimer broadcasts the | 
|  | * programming might have moved the | 
|  | * timer to this cpu. If yes, remove | 
|  | * us from the broadcast mask and | 
|  | * return busy. | 
|  | */ | 
|  | ret = broadcast_needs_cpu(bc, cpu); | 
|  | if (ret) { | 
|  | cpumask_clear_cpu(cpu, | 
|  | tick_broadcast_oneshot_mask); | 
|  | } | 
|  | } | 
|  | } | 
|  | } else { | 
|  | if (cpumask_test_and_clear_cpu(cpu, tick_broadcast_oneshot_mask)) { | 
|  | clockevents_switch_state(dev, CLOCK_EVT_STATE_ONESHOT); | 
|  | /* | 
|  | * The cpu which was handling the broadcast | 
|  | * timer marked this cpu in the broadcast | 
|  | * pending mask and fired the broadcast | 
|  | * IPI. So we are going to handle the expired | 
|  | * event anyway via the broadcast IPI | 
|  | * handler. No need to reprogram the timer | 
|  | * with an already expired event. | 
|  | */ | 
|  | if (cpumask_test_and_clear_cpu(cpu, | 
|  | tick_broadcast_pending_mask)) | 
|  | goto out; | 
|  |  | 
|  | /* | 
|  | * Bail out if there is no next event. | 
|  | */ | 
|  | if (dev->next_event == KTIME_MAX) | 
|  | goto out; | 
|  | /* | 
|  | * If the pending bit is not set, then we are | 
|  | * either the CPU handling the broadcast | 
|  | * interrupt or we got woken by something else. | 
|  | * | 
|  | * We are no longer in the broadcast mask, so | 
|  | * if the cpu local expiry time is already | 
|  | * reached, we would reprogram the cpu local | 
|  | * timer with an already expired event. | 
|  | * | 
|  | * This can lead to a ping-pong when we return | 
|  | * to idle and therefore rearm the broadcast | 
|  | * timer before the cpu local timer was able | 
|  | * to fire. This happens because the forced | 
|  | * reprogramming makes sure that the event | 
|  | * will happen in the future and depending on | 
|  | * the min_delta setting this might be far | 
|  | * enough out that the ping-pong starts. | 
|  | * | 
|  | * If the cpu local next_event has expired | 
|  | * then we know that the broadcast timer | 
|  | * next_event has expired as well and | 
|  | * broadcast is about to be handled. So we | 
|  | * avoid reprogramming and enforce that the | 
|  | * broadcast handler, which did not run yet, | 
|  | * will invoke the cpu local handler. | 
|  | * | 
|  | * We cannot call the handler directly from | 
|  | * here, because we might be in a NOHZ phase | 
|  | * and we did not go through the irq_enter() | 
|  | * nohz fixups. | 
|  | */ | 
|  | now = ktime_get(); | 
|  | if (dev->next_event <= now) { | 
|  | cpumask_set_cpu(cpu, tick_broadcast_force_mask); | 
|  | goto out; | 
|  | } | 
|  | /* | 
|  | * We got woken by something else. Reprogram | 
|  | * the cpu local timer device. | 
|  | */ | 
|  | tick_program_event(dev->next_event, 1); | 
|  | } | 
|  | } | 
|  | out: | 
|  | raw_spin_unlock(&tick_broadcast_lock); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Reset the one shot broadcast for a cpu | 
|  | * | 
|  | * Called with tick_broadcast_lock held | 
|  | */ | 
|  | static void tick_broadcast_clear_oneshot(int cpu) | 
|  | { | 
|  | cpumask_clear_cpu(cpu, tick_broadcast_oneshot_mask); | 
|  | cpumask_clear_cpu(cpu, tick_broadcast_pending_mask); | 
|  | } | 
|  |  | 
|  | static void tick_broadcast_init_next_event(struct cpumask *mask, | 
|  | ktime_t expires) | 
|  | { | 
|  | struct tick_device *td; | 
|  | int cpu; | 
|  |  | 
|  | for_each_cpu(cpu, mask) { | 
|  | td = &per_cpu(tick_cpu_device, cpu); | 
|  | if (td->evtdev) | 
|  | td->evtdev->next_event = expires; | 
|  | } | 
|  | } | 
|  |  | 
|  | static inline ktime_t tick_get_next_period(void) | 
|  | { | 
|  | ktime_t next; | 
|  |  | 
|  | /* | 
|  | * Protect against concurrent updates (store /load tearing on | 
|  | * 32bit). It does not matter if the time is already in the | 
|  | * past. The broadcast device which is about to be programmed will | 
|  | * fire in any case. | 
|  | */ | 
|  | raw_spin_lock(&jiffies_lock); | 
|  | next = tick_next_period; | 
|  | raw_spin_unlock(&jiffies_lock); | 
|  | return next; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * tick_broadcast_setup_oneshot - setup the broadcast device | 
|  | */ | 
|  | static void tick_broadcast_setup_oneshot(struct clock_event_device *bc) | 
|  | { | 
|  | int cpu = smp_processor_id(); | 
|  |  | 
|  | if (!bc) | 
|  | return; | 
|  |  | 
|  | /* Set it up only once ! */ | 
|  | if (bc->event_handler != tick_handle_oneshot_broadcast) { | 
|  | int was_periodic = clockevent_state_periodic(bc); | 
|  |  | 
|  | bc->event_handler = tick_handle_oneshot_broadcast; | 
|  |  | 
|  | /* | 
|  | * We must be careful here. There might be other CPUs | 
|  | * waiting for periodic broadcast. We need to set the | 
|  | * oneshot_mask bits for those and program the | 
|  | * broadcast device to fire. | 
|  | */ | 
|  | cpumask_copy(tmpmask, tick_broadcast_mask); | 
|  | cpumask_clear_cpu(cpu, tmpmask); | 
|  | cpumask_or(tick_broadcast_oneshot_mask, | 
|  | tick_broadcast_oneshot_mask, tmpmask); | 
|  |  | 
|  | if (was_periodic && !cpumask_empty(tmpmask)) { | 
|  | ktime_t nextevt = tick_get_next_period(); | 
|  |  | 
|  | clockevents_switch_state(bc, CLOCK_EVT_STATE_ONESHOT); | 
|  | tick_broadcast_init_next_event(tmpmask, nextevt); | 
|  | tick_broadcast_set_event(bc, cpu, nextevt); | 
|  | } else | 
|  | bc->next_event = KTIME_MAX; | 
|  | } else { | 
|  | /* | 
|  | * The first cpu which switches to oneshot mode sets | 
|  | * the bit for all other cpus which are in the general | 
|  | * (periodic) broadcast mask. So the bit is set and | 
|  | * would prevent the first broadcast enter after this | 
|  | * to program the bc device. | 
|  | */ | 
|  | tick_broadcast_clear_oneshot(cpu); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Select oneshot operating mode for the broadcast device | 
|  | */ | 
|  | void tick_broadcast_switch_to_oneshot(void) | 
|  | { | 
|  | struct clock_event_device *bc; | 
|  | unsigned long flags; | 
|  |  | 
|  | raw_spin_lock_irqsave(&tick_broadcast_lock, flags); | 
|  |  | 
|  | tick_broadcast_device.mode = TICKDEV_MODE_ONESHOT; | 
|  | bc = tick_broadcast_device.evtdev; | 
|  | if (bc) | 
|  | tick_broadcast_setup_oneshot(bc); | 
|  |  | 
|  | raw_spin_unlock_irqrestore(&tick_broadcast_lock, flags); | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_HOTPLUG_CPU | 
|  | void hotplug_cpu__broadcast_tick_pull(int deadcpu) | 
|  | { | 
|  | struct clock_event_device *bc; | 
|  | unsigned long flags; | 
|  |  | 
|  | raw_spin_lock_irqsave(&tick_broadcast_lock, flags); | 
|  | bc = tick_broadcast_device.evtdev; | 
|  |  | 
|  | if (bc && broadcast_needs_cpu(bc, deadcpu)) { | 
|  | /* This moves the broadcast assignment to this CPU: */ | 
|  | clockevents_program_event(bc, bc->next_event, 1); | 
|  | } | 
|  | raw_spin_unlock_irqrestore(&tick_broadcast_lock, flags); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Remove a dying CPU from broadcasting | 
|  | */ | 
|  | static void tick_broadcast_oneshot_offline(unsigned int cpu) | 
|  | { | 
|  | /* | 
|  | * Clear the broadcast masks for the dead cpu, but do not stop | 
|  | * the broadcast device! | 
|  | */ | 
|  | cpumask_clear_cpu(cpu, tick_broadcast_oneshot_mask); | 
|  | cpumask_clear_cpu(cpu, tick_broadcast_pending_mask); | 
|  | cpumask_clear_cpu(cpu, tick_broadcast_force_mask); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /* | 
|  | * Check, whether the broadcast device is in one shot mode | 
|  | */ | 
|  | int tick_broadcast_oneshot_active(void) | 
|  | { | 
|  | return tick_broadcast_device.mode == TICKDEV_MODE_ONESHOT; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Check whether the broadcast device supports oneshot. | 
|  | */ | 
|  | bool tick_broadcast_oneshot_available(void) | 
|  | { | 
|  | struct clock_event_device *bc = tick_broadcast_device.evtdev; | 
|  |  | 
|  | return bc ? bc->features & CLOCK_EVT_FEAT_ONESHOT : false; | 
|  | } | 
|  |  | 
|  | #else | 
|  | int __tick_broadcast_oneshot_control(enum tick_broadcast_state state) | 
|  | { | 
|  | struct clock_event_device *bc = tick_broadcast_device.evtdev; | 
|  |  | 
|  | if (!bc || (bc->features & CLOCK_EVT_FEAT_HRTIMER)) | 
|  | return -EBUSY; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | void __init tick_broadcast_init(void) | 
|  | { | 
|  | zalloc_cpumask_var(&tick_broadcast_mask, GFP_NOWAIT); | 
|  | zalloc_cpumask_var(&tick_broadcast_on, GFP_NOWAIT); | 
|  | zalloc_cpumask_var(&tmpmask, GFP_NOWAIT); | 
|  | #ifdef CONFIG_TICK_ONESHOT | 
|  | zalloc_cpumask_var(&tick_broadcast_oneshot_mask, GFP_NOWAIT); | 
|  | zalloc_cpumask_var(&tick_broadcast_pending_mask, GFP_NOWAIT); | 
|  | zalloc_cpumask_var(&tick_broadcast_force_mask, GFP_NOWAIT); | 
|  | #endif | 
|  | } |