drivers/usb/host/ssb-hcd.c - linux - Git at Google

 /*
  * Sonics Silicon Backplane
  * Broadcom USB-core driver  (SSB bus glue)
  *
  * Copyright 2011-2012 Hauke Mehrtens <hauke@hauke-m.de>
  *
  * Based on ssb-ohci driver
  * Copyright 2007 Michael Buesch <m@bues.ch>
  *
  * Derived from the OHCI-PCI driver
  * Copyright 1999 Roman Weissgaerber
  * Copyright 2000-2002 David Brownell
  * Copyright 1999 Linus Torvalds
  * Copyright 1999 Gregory P. Smith
  *
  * Derived from the USBcore related parts of Broadcom-SB
  * Copyright 2005-2011 Broadcom Corporation
  *
  * Licensed under the GNU/GPL. See COPYING for details.
  */
 #include <linux/ssb/ssb.h>
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/usb/ehci_pdriver.h>
 #include <linux/usb/ohci_pdriver.h>

 MODULE_AUTHOR("Hauke Mehrtens");
 MODULE_DESCRIPTION("Common USB driver for SSB Bus");
 MODULE_LICENSE("GPL");

 #define SSB_HCD_TMSLOW_HOSTMODE	(1 << 29)

 struct ssb_hcd_device {
 	struct platform_device *ehci_dev;
 	struct platform_device *ohci_dev;

 	u32 enable_flags;
 };

 static void ssb_hcd_5354wa(struct ssb_device *dev)
 {
 #ifdef CONFIG_SSB_DRIVER_MIPS
 	/* Work around for 5354 failures */
 	if (dev->id.revision == 2 && dev->bus->chip_id == 0x5354) {
 		/* Change syn01 reg */
 		ssb_write32(dev, 0x894, 0x00fe00fe);

 		/* Change syn03 reg */
 		ssb_write32(dev, 0x89c, ssb_read32(dev, 0x89c) | 0x1);
 	}
 #endif
 }

 static void ssb_hcd_usb20wa(struct ssb_device *dev)
 {
 	if (dev->id.coreid == SSB_DEV_USB20_HOST) {
 		/*
 		 * USB 2.0 special considerations:
 		 *
 		 * In addition to the standard SSB reset sequence, the Host
 		 * Control Register must be programmed to bring the USB core
 		 * and various phy components out of reset.
 		 */
 		ssb_write32(dev, 0x200, 0x7ff);

 		/* Change Flush control reg */
 		ssb_write32(dev, 0x400, ssb_read32(dev, 0x400) & ~8);
 		ssb_read32(dev, 0x400);

 		/* Change Shim control reg */
 		ssb_write32(dev, 0x304, ssb_read32(dev, 0x304) & ~0x100);
 		ssb_read32(dev, 0x304);

 		udelay(1);

 		ssb_hcd_5354wa(dev);
 	}
 }

 /* based on arch/mips/brcm-boards/bcm947xx/pcibios.c */
 static u32 ssb_hcd_init_chip(struct ssb_device *dev)
 {
 	u32 flags = 0;

 	if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV)
 		/* Put the device into host-mode. */
 		flags |= SSB_HCD_TMSLOW_HOSTMODE;

 	ssb_device_enable(dev, flags);

 	ssb_hcd_usb20wa(dev);

 	return flags;
 }

 static const struct usb_ehci_pdata ehci_pdata = {
 };

 static const struct usb_ohci_pdata ohci_pdata = {
 };

 static struct platform_device *ssb_hcd_create_pdev(struct ssb_device *dev, bool ohci, u32 addr, u32 len)
 {
 	struct platform_device *hci_dev;
 	struct resource hci_res[2];
 	int ret = -ENOMEM;

 	memset(hci_res, 0, sizeof(hci_res));

 	hci_res[0].start = addr;
 	hci_res[0].end = hci_res[0].start + len - 1;
 	hci_res[0].flags = IORESOURCE_MEM;

 	hci_res[1].start = dev->irq;
 	hci_res[1].flags = IORESOURCE_IRQ;

 	hci_dev = platform_device_alloc(ohci ? "ohci-platform" :
 					"ehci-platform" , 0);
 	if (!hci_dev)
 		return NULL;

 	hci_dev->dev.parent = dev->dev;
 	hci_dev->dev.dma_mask = &hci_dev->dev.coherent_dma_mask;

 	ret = platform_device_add_resources(hci_dev, hci_res,
 					    ARRAY_SIZE(hci_res));
 	if (ret)
 		goto err_alloc;
 	if (ohci)
 		ret = platform_device_add_data(hci_dev, &ohci_pdata,
 					       sizeof(ohci_pdata));
 	else
 		ret = platform_device_add_data(hci_dev, &ehci_pdata,
 					       sizeof(ehci_pdata));
 	if (ret)
 		goto err_alloc;
 	ret = platform_device_add(hci_dev);
 	if (ret)
 		goto err_alloc;

 	return hci_dev;

 err_alloc:
 	platform_device_put(hci_dev);
 	return ERR_PTR(ret);
 }

 static int ssb_hcd_probe(struct ssb_device *dev,
 				   const struct ssb_device_id *id)
 {
 	int err, tmp;
 	int start, len;
 	u16 chipid_top;
 	u16 coreid = dev->id.coreid;
 	struct ssb_hcd_device *usb_dev;

 	/* USBcores are only connected on embedded devices. */
 	chipid_top = (dev->bus->chip_id & 0xFF00);
 	if (chipid_top != 0x4700 && chipid_top != 0x5300)
 		return -ENODEV;

 	/* TODO: Probably need checks here; is the core connected? */

 	if (dma_set_mask_and_coherent(dev->dma_dev, DMA_BIT_MASK(32)))
 		return -EOPNOTSUPP;

 	usb_dev = kzalloc(sizeof(struct ssb_hcd_device), GFP_KERNEL);
 	if (!usb_dev)
 		return -ENOMEM;

 	/* We currently always attach SSB_DEV_USB11_HOSTDEV
 	 * as HOST OHCI. If we want to attach it as Client device,
 	 * we must branch here and call into the (yet to
 	 * be written) Client mode driver. Same for remove(). */
 	usb_dev->enable_flags = ssb_hcd_init_chip(dev);

 	tmp = ssb_read32(dev, SSB_ADMATCH0);

 	start = ssb_admatch_base(tmp);
 	len = (coreid == SSB_DEV_USB20_HOST) ? 0x800 : ssb_admatch_size(tmp);
 	usb_dev->ohci_dev = ssb_hcd_create_pdev(dev, true, start, len);
 	if (IS_ERR(usb_dev->ohci_dev)) {
 		err = PTR_ERR(usb_dev->ohci_dev);
 		goto err_free_usb_dev;
 	}

 	if (coreid == SSB_DEV_USB20_HOST) {
 		start = ssb_admatch_base(tmp) + 0x800; /* ehci core offset */
 		usb_dev->ehci_dev = ssb_hcd_create_pdev(dev, false, start, len);
 		if (IS_ERR(usb_dev->ehci_dev)) {
 			err = PTR_ERR(usb_dev->ehci_dev);
 			goto err_unregister_ohci_dev;
 		}
 	}

 	ssb_set_drvdata(dev, usb_dev);
 	return 0;

 err_unregister_ohci_dev:
 	platform_device_unregister(usb_dev->ohci_dev);
 err_free_usb_dev:
 	kfree(usb_dev);
 	return err;
 }

 static void ssb_hcd_remove(struct ssb_device *dev)
 {
 	struct ssb_hcd_device *usb_dev = ssb_get_drvdata(dev);
 	struct platform_device *ohci_dev = usb_dev->ohci_dev;
 	struct platform_device *ehci_dev = usb_dev->ehci_dev;

 	if (ohci_dev)
 		platform_device_unregister(ohci_dev);
 	if (ehci_dev)
 		platform_device_unregister(ehci_dev);

 	ssb_device_disable(dev, 0);
 }

 static void ssb_hcd_shutdown(struct ssb_device *dev)
 {
 	ssb_device_disable(dev, 0);
 }

 #ifdef CONFIG_PM

 static int ssb_hcd_suspend(struct ssb_device *dev, pm_message_t state)
 {
 	ssb_device_disable(dev, 0);

 	return 0;
 }

 static int ssb_hcd_resume(struct ssb_device *dev)
 {
 	struct ssb_hcd_device *usb_dev = ssb_get_drvdata(dev);

 	ssb_device_enable(dev, usb_dev->enable_flags);

 	return 0;
 }

 #else /* !CONFIG_PM */
 #define ssb_hcd_suspend	NULL
 #define ssb_hcd_resume	NULL
 #endif /* CONFIG_PM */

 static const struct ssb_device_id ssb_hcd_table[] = {
 	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV),
 	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV),
 	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV),
 	{},
 };
 MODULE_DEVICE_TABLE(ssb, ssb_hcd_table);

 static struct ssb_driver ssb_hcd_driver = {
 	.name		= KBUILD_MODNAME,
 	.id_table	= ssb_hcd_table,
 	.probe		= ssb_hcd_probe,
 	.remove		= ssb_hcd_remove,
 	.shutdown	= ssb_hcd_shutdown,
 	.suspend	= ssb_hcd_suspend,
 	.resume		= ssb_hcd_resume,
 };

 static int __init ssb_hcd_init(void)
 {
 	return ssb_driver_register(&ssb_hcd_driver);
 }
 module_init(ssb_hcd_init);

 static void __exit ssb_hcd_exit(void)
 {
 	ssb_driver_unregister(&ssb_hcd_driver);
 }
 module_exit(ssb_hcd_exit);
	/*
	* Sonics Silicon Backplane
	* Broadcom USB-core driver (SSB bus glue)
	*
	* Copyright 2011-2012 Hauke Mehrtens <hauke@hauke-m.de>
	*
	* Based on ssb-ohci driver
	* Copyright 2007 Michael Buesch <m@bues.ch>
	*
	* Derived from the OHCI-PCI driver
	* Copyright 1999 Roman Weissgaerber
	* Copyright 2000-2002 David Brownell
	* Copyright 1999 Linus Torvalds
	* Copyright 1999 Gregory P. Smith
	*
	* Derived from the USBcore related parts of Broadcom-SB
	* Copyright 2005-2011 Broadcom Corporation
	*
	* Licensed under the GNU/GPL. See COPYING for details.
	*/
	#include <linux/ssb/ssb.h>
	#include <linux/delay.h>
	#include <linux/platform_device.h>
	#include <linux/module.h>
	#include <linux/slab.h>
	#include <linux/usb/ehci_pdriver.h>
	#include <linux/usb/ohci_pdriver.h>

	MODULE_AUTHOR("Hauke Mehrtens");
	MODULE_DESCRIPTION("Common USB driver for SSB Bus");
	MODULE_LICENSE("GPL");

	#define SSB_HCD_TMSLOW_HOSTMODE (1 << 29)

	struct ssb_hcd_device {
	struct platform_device *ehci_dev;
	struct platform_device *ohci_dev;

	u32 enable_flags;
	};

	static void ssb_hcd_5354wa(struct ssb_device *dev)
	{
	#ifdef CONFIG_SSB_DRIVER_MIPS
	/* Work around for 5354 failures */
	if (dev->id.revision == 2 && dev->bus->chip_id == 0x5354) {
	/* Change syn01 reg */
	ssb_write32(dev, 0x894, 0x00fe00fe);

	/* Change syn03 reg */
	ssb_write32(dev, 0x89c, ssb_read32(dev, 0x89c) \| 0x1);
	}
	#endif
	}

	static void ssb_hcd_usb20wa(struct ssb_device *dev)
	{
	if (dev->id.coreid == SSB_DEV_USB20_HOST) {
	/*
	* USB 2.0 special considerations:
	*
	* In addition to the standard SSB reset sequence, the Host
	* Control Register must be programmed to bring the USB core
	* and various phy components out of reset.
	*/
	ssb_write32(dev, 0x200, 0x7ff);

	/* Change Flush control reg */
	ssb_write32(dev, 0x400, ssb_read32(dev, 0x400) & ~8);
	ssb_read32(dev, 0x400);

	/* Change Shim control reg */
	ssb_write32(dev, 0x304, ssb_read32(dev, 0x304) & ~0x100);
	ssb_read32(dev, 0x304);

	udelay(1);

	ssb_hcd_5354wa(dev);
	}
	}

	/* based on arch/mips/brcm-boards/bcm947xx/pcibios.c */
	static u32 ssb_hcd_init_chip(struct ssb_device *dev)
	{
	u32 flags = 0;

	if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV)
	/* Put the device into host-mode. */
	flags \|= SSB_HCD_TMSLOW_HOSTMODE;

	ssb_device_enable(dev, flags);

	ssb_hcd_usb20wa(dev);

	return flags;
	}

	static const struct usb_ehci_pdata ehci_pdata = {
	};

	static const struct usb_ohci_pdata ohci_pdata = {
	};

	static struct platform_device ssb_hcd_create_pdev(struct ssb_device dev, bool ohci, u32 addr, u32 len)
	{
	struct platform_device *hci_dev;
	struct resource hci_res[2];
	int ret = -ENOMEM;

	memset(hci_res, 0, sizeof(hci_res));

	hci_res[0].start = addr;
	hci_res[0].end = hci_res[0].start + len - 1;
	hci_res[0].flags = IORESOURCE_MEM;

	hci_res[1].start = dev->irq;
	hci_res[1].flags = IORESOURCE_IRQ;

	hci_dev = platform_device_alloc(ohci ? "ohci-platform" :
	"ehci-platform" , 0);
	if (!hci_dev)
	return NULL;

	hci_dev->dev.parent = dev->dev;
	hci_dev->dev.dma_mask = &hci_dev->dev.coherent_dma_mask;

	ret = platform_device_add_resources(hci_dev, hci_res,
	ARRAY_SIZE(hci_res));
	if (ret)
	goto err_alloc;
	if (ohci)
	ret = platform_device_add_data(hci_dev, &ohci_pdata,
	sizeof(ohci_pdata));
	else
	ret = platform_device_add_data(hci_dev, &ehci_pdata,
	sizeof(ehci_pdata));
	if (ret)
	goto err_alloc;
	ret = platform_device_add(hci_dev);
	if (ret)
	goto err_alloc;

	return hci_dev;

	err_alloc:
	platform_device_put(hci_dev);
	return ERR_PTR(ret);
	}

	static int ssb_hcd_probe(struct ssb_device *dev,
	const struct ssb_device_id *id)
	{
	int err, tmp;
	int start, len;
	u16 chipid_top;
	u16 coreid = dev->id.coreid;
	struct ssb_hcd_device *usb_dev;

	/* USBcores are only connected on embedded devices. */
	chipid_top = (dev->bus->chip_id & 0xFF00);
	if (chipid_top != 0x4700 && chipid_top != 0x5300)
	return -ENODEV;

	/* TODO: Probably need checks here; is the core connected? */

	if (dma_set_mask_and_coherent(dev->dma_dev, DMA_BIT_MASK(32)))
	return -EOPNOTSUPP;

	usb_dev = kzalloc(sizeof(struct ssb_hcd_device), GFP_KERNEL);
	if (!usb_dev)
	return -ENOMEM;

	/* We currently always attach SSB_DEV_USB11_HOSTDEV
	* as HOST OHCI. If we want to attach it as Client device,
	* we must branch here and call into the (yet to
	* be written) Client mode driver. Same for remove(). */
	usb_dev->enable_flags = ssb_hcd_init_chip(dev);

	tmp = ssb_read32(dev, SSB_ADMATCH0);

	start = ssb_admatch_base(tmp);
	len = (coreid == SSB_DEV_USB20_HOST) ? 0x800 : ssb_admatch_size(tmp);
	usb_dev->ohci_dev = ssb_hcd_create_pdev(dev, true, start, len);
	if (IS_ERR(usb_dev->ohci_dev)) {
	err = PTR_ERR(usb_dev->ohci_dev);
	goto err_free_usb_dev;
	}

	if (coreid == SSB_DEV_USB20_HOST) {
	start = ssb_admatch_base(tmp) + 0x800; /* ehci core offset */
	usb_dev->ehci_dev = ssb_hcd_create_pdev(dev, false, start, len);
	if (IS_ERR(usb_dev->ehci_dev)) {
	err = PTR_ERR(usb_dev->ehci_dev);
	goto err_unregister_ohci_dev;
	}
	}

	ssb_set_drvdata(dev, usb_dev);
	return 0;

	err_unregister_ohci_dev:
	platform_device_unregister(usb_dev->ohci_dev);
	err_free_usb_dev:
	kfree(usb_dev);
	return err;
	}

	static void ssb_hcd_remove(struct ssb_device *dev)
	{
	struct ssb_hcd_device *usb_dev = ssb_get_drvdata(dev);
	struct platform_device *ohci_dev = usb_dev->ohci_dev;
	struct platform_device *ehci_dev = usb_dev->ehci_dev;

	if (ohci_dev)
	platform_device_unregister(ohci_dev);
	if (ehci_dev)
	platform_device_unregister(ehci_dev);

	ssb_device_disable(dev, 0);
	}

	static void ssb_hcd_shutdown(struct ssb_device *dev)
	{
	ssb_device_disable(dev, 0);
	}

	#ifdef CONFIG_PM

	static int ssb_hcd_suspend(struct ssb_device *dev, pm_message_t state)
	{
	ssb_device_disable(dev, 0);

	return 0;
	}

	static int ssb_hcd_resume(struct ssb_device *dev)
	{
	struct ssb_hcd_device *usb_dev = ssb_get_drvdata(dev);

	ssb_device_enable(dev, usb_dev->enable_flags);

	return 0;
	}

	#else /* !CONFIG_PM */
	#define ssb_hcd_suspend NULL
	#define ssb_hcd_resume NULL
	#endif /* CONFIG_PM */

	static const struct ssb_device_id ssb_hcd_table[] = {
	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV),
	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV),
	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV),
	{},
	};
	MODULE_DEVICE_TABLE(ssb, ssb_hcd_table);

	static struct ssb_driver ssb_hcd_driver = {
	.name = KBUILD_MODNAME,
	.id_table = ssb_hcd_table,
	.probe = ssb_hcd_probe,
	.remove = ssb_hcd_remove,
	.shutdown = ssb_hcd_shutdown,
	.suspend = ssb_hcd_suspend,
	.resume = ssb_hcd_resume,
	};

	static int __init ssb_hcd_init(void)
	{
	return ssb_driver_register(&ssb_hcd_driver);
	}
	module_init(ssb_hcd_init);

	static void __exit ssb_hcd_exit(void)
	{
	ssb_driver_unregister(&ssb_hcd_driver);
	}
	module_exit(ssb_hcd_exit);