| /* |
| * Copyright © 2008 Intel Corporation |
| * 2014 Red Hat Inc. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the next |
| * paragraph) shall be included in all copies or substantial portions of the |
| * Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS |
| * IN THE SOFTWARE. |
| * |
| */ |
| |
| #include <drm/drm_atomic.h> |
| #include <drm/drm_atomic_helper.h> |
| #include <drm/drm_edid.h> |
| #include <drm/drm_fixed.h> |
| #include <drm/drm_probe_helper.h> |
| |
| #include "i915_drv.h" |
| #include "i915_reg.h" |
| #include "intel_atomic.h" |
| #include "intel_audio.h" |
| #include "intel_connector.h" |
| #include "intel_crtc.h" |
| #include "intel_ddi.h" |
| #include "intel_de.h" |
| #include "intel_display_driver.h" |
| #include "intel_display_types.h" |
| #include "intel_dp.h" |
| #include "intel_dp_hdcp.h" |
| #include "intel_dp_mst.h" |
| #include "intel_dp_tunnel.h" |
| #include "intel_dpio_phy.h" |
| #include "intel_hdcp.h" |
| #include "intel_hotplug.h" |
| #include "intel_link_bw.h" |
| #include "intel_psr.h" |
| #include "intel_vdsc.h" |
| #include "skl_scaler.h" |
| |
| static int intel_dp_mst_max_dpt_bpp(const struct intel_crtc_state *crtc_state, |
| bool dsc) |
| { |
| struct drm_i915_private *i915 = to_i915(crtc_state->uapi.crtc->dev); |
| const struct drm_display_mode *adjusted_mode = |
| &crtc_state->hw.adjusted_mode; |
| |
| if (!intel_dp_is_uhbr(crtc_state) || DISPLAY_VER(i915) >= 20 || !dsc) |
| return INT_MAX; |
| |
| /* |
| * DSC->DPT interface width: |
| * ICL-MTL: 72 bits (each branch has 72 bits, only left branch is used) |
| * LNL+: 144 bits (not a bottleneck in any config) |
| * |
| * Bspec/49259 suggests that the FEC overhead needs to be |
| * applied here, though HW people claim that neither this FEC |
| * or any other overhead is applicable here (that is the actual |
| * available_bw is just symbol_clock * 72). However based on |
| * testing on MTL-P the |
| * - DELL U3224KBA display |
| * - Unigraf UCD-500 CTS test sink |
| * devices the |
| * - 5120x2880/995.59Mhz |
| * - 6016x3384/1357.23Mhz |
| * - 6144x3456/1413.39Mhz |
| * modes (all the ones having a DPT limit on the above devices), |
| * both the channel coding efficiency and an additional 3% |
| * overhead needs to be accounted for. |
| */ |
| return div64_u64(mul_u32_u32(intel_dp_link_symbol_clock(crtc_state->port_clock) * 72, |
| drm_dp_bw_channel_coding_efficiency(true)), |
| mul_u32_u32(adjusted_mode->crtc_clock, 1030000)); |
| } |
| |
| static int intel_dp_mst_bw_overhead(const struct intel_crtc_state *crtc_state, |
| const struct intel_connector *connector, |
| bool ssc, bool dsc, int bpp_x16) |
| { |
| const struct drm_display_mode *adjusted_mode = |
| &crtc_state->hw.adjusted_mode; |
| unsigned long flags = DRM_DP_BW_OVERHEAD_MST; |
| int dsc_slice_count = 0; |
| int overhead; |
| |
| flags |= intel_dp_is_uhbr(crtc_state) ? DRM_DP_BW_OVERHEAD_UHBR : 0; |
| flags |= ssc ? DRM_DP_BW_OVERHEAD_SSC_REF_CLK : 0; |
| flags |= crtc_state->fec_enable ? DRM_DP_BW_OVERHEAD_FEC : 0; |
| |
| if (dsc) { |
| flags |= DRM_DP_BW_OVERHEAD_DSC; |
| dsc_slice_count = intel_dp_dsc_get_slice_count(connector, |
| adjusted_mode->clock, |
| adjusted_mode->hdisplay, |
| crtc_state->joiner_pipes); |
| } |
| |
| overhead = drm_dp_bw_overhead(crtc_state->lane_count, |
| adjusted_mode->hdisplay, |
| dsc_slice_count, |
| bpp_x16, |
| flags); |
| |
| /* |
| * TODO: clarify whether a minimum required by the fixed FEC overhead |
| * in the bspec audio programming sequence is required here. |
| */ |
| return max(overhead, intel_dp_bw_fec_overhead(crtc_state->fec_enable)); |
| } |
| |
| static void intel_dp_mst_compute_m_n(const struct intel_crtc_state *crtc_state, |
| const struct intel_connector *connector, |
| int overhead, |
| int bpp_x16, |
| struct intel_link_m_n *m_n) |
| { |
| const struct drm_display_mode *adjusted_mode = |
| &crtc_state->hw.adjusted_mode; |
| |
| /* TODO: Check WA 14013163432 to set data M/N for full BW utilization. */ |
| intel_link_compute_m_n(bpp_x16, crtc_state->lane_count, |
| adjusted_mode->crtc_clock, |
| crtc_state->port_clock, |
| overhead, |
| m_n); |
| |
| m_n->tu = DIV_ROUND_UP_ULL(mul_u32_u32(m_n->data_m, 64), m_n->data_n); |
| } |
| |
| static int intel_dp_mst_calc_pbn(int pixel_clock, int bpp_x16, int bw_overhead) |
| { |
| int effective_data_rate = |
| intel_dp_effective_data_rate(pixel_clock, bpp_x16, bw_overhead); |
| |
| /* |
| * TODO: Use drm_dp_calc_pbn_mode() instead, once it's converted |
| * to calculate PBN with the BW overhead passed to it. |
| */ |
| return DIV_ROUND_UP(effective_data_rate * 64, 54 * 1000); |
| } |
| |
| static int intel_dp_mst_find_vcpi_slots_for_bpp(struct intel_encoder *encoder, |
| struct intel_crtc_state *crtc_state, |
| int max_bpp, |
| int min_bpp, |
| struct link_config_limits *limits, |
| struct drm_connector_state *conn_state, |
| int step, |
| bool dsc) |
| { |
| struct drm_atomic_state *state = crtc_state->uapi.state; |
| struct intel_dp_mst_encoder *intel_mst = enc_to_mst(encoder); |
| struct intel_dp *intel_dp = &intel_mst->primary->dp; |
| struct drm_dp_mst_topology_state *mst_state; |
| struct intel_connector *connector = |
| to_intel_connector(conn_state->connector); |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| const struct drm_display_mode *adjusted_mode = |
| &crtc_state->hw.adjusted_mode; |
| int bpp, slots = -EINVAL; |
| int max_dpt_bpp; |
| int ret = 0; |
| |
| mst_state = drm_atomic_get_mst_topology_state(state, &intel_dp->mst_mgr); |
| if (IS_ERR(mst_state)) |
| return PTR_ERR(mst_state); |
| |
| crtc_state->lane_count = limits->max_lane_count; |
| crtc_state->port_clock = limits->max_rate; |
| |
| if (dsc) { |
| if (!intel_dp_supports_fec(intel_dp, connector, crtc_state)) |
| return -EINVAL; |
| |
| crtc_state->fec_enable = !intel_dp_is_uhbr(crtc_state); |
| } |
| |
| mst_state->pbn_div = drm_dp_get_vc_payload_bw(&intel_dp->mst_mgr, |
| crtc_state->port_clock, |
| crtc_state->lane_count); |
| |
| max_dpt_bpp = intel_dp_mst_max_dpt_bpp(crtc_state, dsc); |
| if (max_bpp > max_dpt_bpp) { |
| drm_dbg_kms(&i915->drm, "Limiting bpp to max DPT bpp (%d -> %d)\n", |
| max_bpp, max_dpt_bpp); |
| max_bpp = max_dpt_bpp; |
| } |
| |
| drm_dbg_kms(&i915->drm, "Looking for slots in range min bpp %d max bpp %d\n", |
| min_bpp, max_bpp); |
| |
| for (bpp = max_bpp; bpp >= min_bpp; bpp -= step) { |
| int local_bw_overhead; |
| int remote_bw_overhead; |
| int link_bpp_x16; |
| int remote_tu; |
| fixed20_12 pbn; |
| |
| drm_dbg_kms(&i915->drm, "Trying bpp %d\n", bpp); |
| |
| link_bpp_x16 = to_bpp_x16(dsc ? bpp : |
| intel_dp_output_bpp(crtc_state->output_format, bpp)); |
| |
| local_bw_overhead = intel_dp_mst_bw_overhead(crtc_state, connector, |
| false, dsc, link_bpp_x16); |
| remote_bw_overhead = intel_dp_mst_bw_overhead(crtc_state, connector, |
| true, dsc, link_bpp_x16); |
| |
| intel_dp_mst_compute_m_n(crtc_state, connector, |
| local_bw_overhead, |
| link_bpp_x16, |
| &crtc_state->dp_m_n); |
| |
| /* |
| * The TU size programmed to the HW determines which slots in |
| * an MTP frame are used for this stream, which needs to match |
| * the payload size programmed to the first downstream branch |
| * device's payload table. |
| * |
| * Note that atm the payload's PBN value DRM core sends via |
| * the ALLOCATE_PAYLOAD side-band message matches the payload |
| * size (which it calculates from the PBN value) it programs |
| * to the first branch device's payload table. The allocation |
| * in the payload table could be reduced though (to |
| * crtc_state->dp_m_n.tu), provided that the driver doesn't |
| * enable SSC on the corresponding link. |
| */ |
| pbn.full = dfixed_const(intel_dp_mst_calc_pbn(adjusted_mode->crtc_clock, |
| link_bpp_x16, |
| remote_bw_overhead)); |
| remote_tu = DIV_ROUND_UP(pbn.full, mst_state->pbn_div.full); |
| |
| /* |
| * Aligning the TUs ensures that symbols consisting of multiple |
| * (4) symbol cycles don't get split between two consecutive |
| * MTPs, as required by Bspec. |
| * TODO: remove the alignment restriction for 128b/132b links |
| * on some platforms, where Bspec allows this. |
| */ |
| remote_tu = ALIGN(remote_tu, 4 / crtc_state->lane_count); |
| |
| /* |
| * Also align PBNs accordingly, since MST core will derive its |
| * own copy of TU from the PBN in drm_dp_atomic_find_time_slots(). |
| * The above comment about the difference between the PBN |
| * allocated for the whole path and the TUs allocated for the |
| * first branch device's link also applies here. |
| */ |
| pbn.full = remote_tu * mst_state->pbn_div.full; |
| crtc_state->pbn = dfixed_trunc(pbn); |
| |
| drm_WARN_ON(&i915->drm, remote_tu < crtc_state->dp_m_n.tu); |
| crtc_state->dp_m_n.tu = remote_tu; |
| |
| slots = drm_dp_atomic_find_time_slots(state, &intel_dp->mst_mgr, |
| connector->port, |
| crtc_state->pbn); |
| if (slots == -EDEADLK) |
| return slots; |
| |
| if (slots >= 0) { |
| drm_WARN_ON(&i915->drm, slots != crtc_state->dp_m_n.tu); |
| |
| break; |
| } |
| } |
| |
| /* We failed to find a proper bpp/timeslots, return error */ |
| if (ret) |
| slots = ret; |
| |
| if (slots < 0) { |
| drm_dbg_kms(&i915->drm, "failed finding vcpi slots:%d\n", |
| slots); |
| } else { |
| if (!dsc) |
| crtc_state->pipe_bpp = bpp; |
| else |
| crtc_state->dsc.compressed_bpp_x16 = to_bpp_x16(bpp); |
| drm_dbg_kms(&i915->drm, "Got %d slots for pipe bpp %d dsc %d\n", slots, bpp, dsc); |
| } |
| |
| return slots; |
| } |
| |
| static int intel_dp_mst_compute_link_config(struct intel_encoder *encoder, |
| struct intel_crtc_state *crtc_state, |
| struct drm_connector_state *conn_state, |
| struct link_config_limits *limits) |
| { |
| int slots = -EINVAL; |
| |
| /* |
| * FIXME: allocate the BW according to link_bpp, which in the case of |
| * YUV420 is only half of the pipe bpp value. |
| */ |
| slots = intel_dp_mst_find_vcpi_slots_for_bpp(encoder, crtc_state, |
| to_bpp_int(limits->link.max_bpp_x16), |
| to_bpp_int(limits->link.min_bpp_x16), |
| limits, |
| conn_state, 2 * 3, false); |
| |
| if (slots < 0) |
| return slots; |
| |
| return 0; |
| } |
| |
| static int intel_dp_dsc_mst_compute_link_config(struct intel_encoder *encoder, |
| struct intel_crtc_state *crtc_state, |
| struct drm_connector_state *conn_state, |
| struct link_config_limits *limits) |
| { |
| struct intel_connector *connector = |
| to_intel_connector(conn_state->connector); |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| int slots = -EINVAL; |
| int i, num_bpc; |
| u8 dsc_bpc[3] = {}; |
| int min_bpp, max_bpp, sink_min_bpp, sink_max_bpp; |
| u8 dsc_max_bpc; |
| int min_compressed_bpp, max_compressed_bpp; |
| |
| /* Max DSC Input BPC for ICL is 10 and for TGL+ is 12 */ |
| if (DISPLAY_VER(i915) >= 12) |
| dsc_max_bpc = min_t(u8, 12, conn_state->max_requested_bpc); |
| else |
| dsc_max_bpc = min_t(u8, 10, conn_state->max_requested_bpc); |
| |
| max_bpp = min_t(u8, dsc_max_bpc * 3, limits->pipe.max_bpp); |
| min_bpp = limits->pipe.min_bpp; |
| |
| num_bpc = drm_dp_dsc_sink_supported_input_bpcs(connector->dp.dsc_dpcd, |
| dsc_bpc); |
| |
| drm_dbg_kms(&i915->drm, "DSC Source supported min bpp %d max bpp %d\n", |
| min_bpp, max_bpp); |
| |
| sink_max_bpp = dsc_bpc[0] * 3; |
| sink_min_bpp = sink_max_bpp; |
| |
| for (i = 1; i < num_bpc; i++) { |
| if (sink_min_bpp > dsc_bpc[i] * 3) |
| sink_min_bpp = dsc_bpc[i] * 3; |
| if (sink_max_bpp < dsc_bpc[i] * 3) |
| sink_max_bpp = dsc_bpc[i] * 3; |
| } |
| |
| drm_dbg_kms(&i915->drm, "DSC Sink supported min bpp %d max bpp %d\n", |
| sink_min_bpp, sink_max_bpp); |
| |
| if (min_bpp < sink_min_bpp) |
| min_bpp = sink_min_bpp; |
| |
| if (max_bpp > sink_max_bpp) |
| max_bpp = sink_max_bpp; |
| |
| crtc_state->pipe_bpp = max_bpp; |
| |
| max_compressed_bpp = intel_dp_dsc_sink_max_compressed_bpp(connector, |
| crtc_state, |
| max_bpp / 3); |
| max_compressed_bpp = min(max_compressed_bpp, |
| to_bpp_int(limits->link.max_bpp_x16)); |
| |
| min_compressed_bpp = intel_dp_dsc_sink_min_compressed_bpp(crtc_state); |
| min_compressed_bpp = max(min_compressed_bpp, |
| to_bpp_int_roundup(limits->link.min_bpp_x16)); |
| |
| drm_dbg_kms(&i915->drm, "DSC Sink supported compressed min bpp %d compressed max bpp %d\n", |
| min_compressed_bpp, max_compressed_bpp); |
| |
| /* Align compressed bpps according to our own constraints */ |
| max_compressed_bpp = intel_dp_dsc_nearest_valid_bpp(i915, max_compressed_bpp, |
| crtc_state->pipe_bpp); |
| min_compressed_bpp = intel_dp_dsc_nearest_valid_bpp(i915, min_compressed_bpp, |
| crtc_state->pipe_bpp); |
| |
| slots = intel_dp_mst_find_vcpi_slots_for_bpp(encoder, crtc_state, max_compressed_bpp, |
| min_compressed_bpp, limits, |
| conn_state, 1, true); |
| |
| if (slots < 0) |
| return slots; |
| |
| return 0; |
| } |
| static int intel_dp_mst_update_slots(struct intel_encoder *encoder, |
| struct intel_crtc_state *crtc_state, |
| struct drm_connector_state *conn_state) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| struct intel_dp_mst_encoder *intel_mst = enc_to_mst(encoder); |
| struct intel_dp *intel_dp = &intel_mst->primary->dp; |
| struct drm_dp_mst_topology_mgr *mgr = &intel_dp->mst_mgr; |
| struct drm_dp_mst_topology_state *topology_state; |
| u8 link_coding_cap = intel_dp_is_uhbr(crtc_state) ? |
| DP_CAP_ANSI_128B132B : DP_CAP_ANSI_8B10B; |
| |
| topology_state = drm_atomic_get_mst_topology_state(conn_state->state, mgr); |
| if (IS_ERR(topology_state)) { |
| drm_dbg_kms(&i915->drm, "slot update failed\n"); |
| return PTR_ERR(topology_state); |
| } |
| |
| drm_dp_mst_update_slots(topology_state, link_coding_cap); |
| |
| return 0; |
| } |
| |
| static int mode_hblank_period_ns(const struct drm_display_mode *mode) |
| { |
| return DIV_ROUND_CLOSEST_ULL(mul_u32_u32(mode->htotal - mode->hdisplay, |
| NSEC_PER_SEC / 1000), |
| mode->crtc_clock); |
| } |
| |
| static bool |
| hblank_expansion_quirk_needs_dsc(const struct intel_connector *connector, |
| const struct intel_crtc_state *crtc_state, |
| const struct link_config_limits *limits) |
| { |
| const struct drm_display_mode *adjusted_mode = |
| &crtc_state->hw.adjusted_mode; |
| bool is_uhbr_sink = connector->mst_port && |
| drm_dp_128b132b_supported(connector->mst_port->dpcd); |
| int hblank_limit = is_uhbr_sink ? 500 : 300; |
| |
| if (!connector->dp.dsc_hblank_expansion_quirk) |
| return false; |
| |
| if (is_uhbr_sink && !drm_dp_is_uhbr_rate(limits->max_rate)) |
| return false; |
| |
| if (mode_hblank_period_ns(adjusted_mode) > hblank_limit) |
| return false; |
| |
| return true; |
| } |
| |
| static bool |
| adjust_limits_for_dsc_hblank_expansion_quirk(const struct intel_connector *connector, |
| const struct intel_crtc_state *crtc_state, |
| struct link_config_limits *limits, |
| bool dsc) |
| { |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| const struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| int min_bpp_x16 = limits->link.min_bpp_x16; |
| |
| if (!hblank_expansion_quirk_needs_dsc(connector, crtc_state, limits)) |
| return true; |
| |
| if (!dsc) { |
| if (intel_dp_supports_dsc(connector, crtc_state)) { |
| drm_dbg_kms(&i915->drm, |
| "[CRTC:%d:%s][CONNECTOR:%d:%s] DSC needed by hblank expansion quirk\n", |
| crtc->base.base.id, crtc->base.name, |
| connector->base.base.id, connector->base.name); |
| return false; |
| } |
| |
| drm_dbg_kms(&i915->drm, |
| "[CRTC:%d:%s][CONNECTOR:%d:%s] Increasing link min bpp to 24 due to hblank expansion quirk\n", |
| crtc->base.base.id, crtc->base.name, |
| connector->base.base.id, connector->base.name); |
| |
| if (limits->link.max_bpp_x16 < to_bpp_x16(24)) |
| return false; |
| |
| limits->link.min_bpp_x16 = to_bpp_x16(24); |
| |
| return true; |
| } |
| |
| drm_WARN_ON(&i915->drm, limits->min_rate != limits->max_rate); |
| |
| if (limits->max_rate < 540000) |
| min_bpp_x16 = to_bpp_x16(13); |
| else if (limits->max_rate < 810000) |
| min_bpp_x16 = to_bpp_x16(10); |
| |
| if (limits->link.min_bpp_x16 >= min_bpp_x16) |
| return true; |
| |
| drm_dbg_kms(&i915->drm, |
| "[CRTC:%d:%s][CONNECTOR:%d:%s] Increasing link min bpp to " BPP_X16_FMT " in DSC mode due to hblank expansion quirk\n", |
| crtc->base.base.id, crtc->base.name, |
| connector->base.base.id, connector->base.name, |
| BPP_X16_ARGS(min_bpp_x16)); |
| |
| if (limits->link.max_bpp_x16 < min_bpp_x16) |
| return false; |
| |
| limits->link.min_bpp_x16 = min_bpp_x16; |
| |
| return true; |
| } |
| |
| static bool |
| intel_dp_mst_compute_config_limits(struct intel_dp *intel_dp, |
| const struct intel_connector *connector, |
| struct intel_crtc_state *crtc_state, |
| bool dsc, |
| struct link_config_limits *limits) |
| { |
| /* |
| * for MST we always configure max link bw - the spec doesn't |
| * seem to suggest we should do otherwise. |
| */ |
| limits->min_rate = limits->max_rate = |
| intel_dp_max_link_rate(intel_dp); |
| |
| limits->min_lane_count = limits->max_lane_count = |
| intel_dp_max_lane_count(intel_dp); |
| |
| limits->pipe.min_bpp = intel_dp_min_bpp(crtc_state->output_format); |
| /* |
| * FIXME: If all the streams can't fit into the link with |
| * their current pipe_bpp we should reduce pipe_bpp across |
| * the board until things start to fit. Until then we |
| * limit to <= 8bpc since that's what was hardcoded for all |
| * MST streams previously. This hack should be removed once |
| * we have the proper retry logic in place. |
| */ |
| limits->pipe.max_bpp = min(crtc_state->pipe_bpp, 24); |
| |
| intel_dp_adjust_compliance_config(intel_dp, crtc_state, limits); |
| |
| if (!intel_dp_compute_config_link_bpp_limits(intel_dp, |
| crtc_state, |
| dsc, |
| limits)) |
| return false; |
| |
| return adjust_limits_for_dsc_hblank_expansion_quirk(connector, |
| crtc_state, |
| limits, |
| dsc); |
| } |
| |
| static int intel_dp_mst_compute_config(struct intel_encoder *encoder, |
| struct intel_crtc_state *pipe_config, |
| struct drm_connector_state *conn_state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| struct intel_atomic_state *state = to_intel_atomic_state(conn_state->state); |
| struct intel_crtc *crtc = to_intel_crtc(pipe_config->uapi.crtc); |
| struct intel_dp_mst_encoder *intel_mst = enc_to_mst(encoder); |
| struct intel_dp *intel_dp = &intel_mst->primary->dp; |
| struct intel_connector *connector = |
| to_intel_connector(conn_state->connector); |
| const struct drm_display_mode *adjusted_mode = |
| &pipe_config->hw.adjusted_mode; |
| struct link_config_limits limits; |
| bool dsc_needed, joiner_needs_dsc; |
| int ret = 0; |
| |
| if (pipe_config->fec_enable && |
| !intel_dp_supports_fec(intel_dp, connector, pipe_config)) |
| return -EINVAL; |
| |
| if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN) |
| return -EINVAL; |
| |
| if (intel_dp_need_joiner(intel_dp, connector, |
| adjusted_mode->crtc_hdisplay, |
| adjusted_mode->crtc_clock)) |
| pipe_config->joiner_pipes = GENMASK(crtc->pipe + 1, crtc->pipe); |
| |
| pipe_config->sink_format = INTEL_OUTPUT_FORMAT_RGB; |
| pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB; |
| pipe_config->has_pch_encoder = false; |
| |
| joiner_needs_dsc = intel_dp_joiner_needs_dsc(dev_priv, pipe_config->joiner_pipes); |
| |
| dsc_needed = joiner_needs_dsc || intel_dp->force_dsc_en || |
| !intel_dp_mst_compute_config_limits(intel_dp, |
| connector, |
| pipe_config, |
| false, |
| &limits); |
| |
| if (!dsc_needed) { |
| ret = intel_dp_mst_compute_link_config(encoder, pipe_config, |
| conn_state, &limits); |
| |
| if (ret == -EDEADLK) |
| return ret; |
| |
| if (ret) |
| dsc_needed = true; |
| } |
| |
| /* enable compression if the mode doesn't fit available BW */ |
| if (dsc_needed) { |
| drm_dbg_kms(&dev_priv->drm, "Try DSC (fallback=%s, joiner=%s, force=%s)\n", |
| str_yes_no(ret), str_yes_no(joiner_needs_dsc), |
| str_yes_no(intel_dp->force_dsc_en)); |
| |
| if (!intel_dp_supports_dsc(connector, pipe_config)) |
| return -EINVAL; |
| |
| if (!intel_dp_mst_compute_config_limits(intel_dp, |
| connector, |
| pipe_config, |
| true, |
| &limits)) |
| return -EINVAL; |
| |
| /* |
| * FIXME: As bpc is hardcoded to 8, as mentioned above, |
| * WARN and ignore the debug flag force_dsc_bpc for now. |
| */ |
| drm_WARN(&dev_priv->drm, intel_dp->force_dsc_bpc, "Cannot Force BPC for MST\n"); |
| /* |
| * Try to get at least some timeslots and then see, if |
| * we can fit there with DSC. |
| */ |
| drm_dbg_kms(&dev_priv->drm, "Trying to find VCPI slots in DSC mode\n"); |
| |
| ret = intel_dp_dsc_mst_compute_link_config(encoder, pipe_config, |
| conn_state, &limits); |
| if (ret < 0) |
| return ret; |
| |
| ret = intel_dp_dsc_compute_config(intel_dp, pipe_config, |
| conn_state, &limits, |
| pipe_config->dp_m_n.tu, false); |
| } |
| |
| if (ret) |
| return ret; |
| |
| ret = intel_dp_mst_update_slots(encoder, pipe_config, conn_state); |
| if (ret) |
| return ret; |
| |
| pipe_config->limited_color_range = |
| intel_dp_limited_color_range(pipe_config, conn_state); |
| |
| if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv)) |
| pipe_config->lane_lat_optim_mask = |
| bxt_dpio_phy_calc_lane_lat_optim_mask(pipe_config->lane_count); |
| |
| intel_dp_audio_compute_config(encoder, pipe_config, conn_state); |
| |
| intel_ddi_compute_min_voltage_level(pipe_config); |
| |
| intel_psr_compute_config(intel_dp, pipe_config, conn_state); |
| |
| return intel_dp_tunnel_atomic_compute_stream_bw(state, intel_dp, connector, |
| pipe_config); |
| } |
| |
| /* |
| * Iterate over all connectors and return a mask of |
| * all CPU transcoders streaming over the same DP link. |
| */ |
| static unsigned int |
| intel_dp_mst_transcoder_mask(struct intel_atomic_state *state, |
| struct intel_dp *mst_port) |
| { |
| struct drm_i915_private *dev_priv = to_i915(state->base.dev); |
| const struct intel_digital_connector_state *conn_state; |
| struct intel_connector *connector; |
| u8 transcoders = 0; |
| int i; |
| |
| if (DISPLAY_VER(dev_priv) < 12) |
| return 0; |
| |
| for_each_new_intel_connector_in_state(state, connector, conn_state, i) { |
| const struct intel_crtc_state *crtc_state; |
| struct intel_crtc *crtc; |
| |
| if (connector->mst_port != mst_port || !conn_state->base.crtc) |
| continue; |
| |
| crtc = to_intel_crtc(conn_state->base.crtc); |
| crtc_state = intel_atomic_get_new_crtc_state(state, crtc); |
| |
| if (!crtc_state->hw.active) |
| continue; |
| |
| transcoders |= BIT(crtc_state->cpu_transcoder); |
| } |
| |
| return transcoders; |
| } |
| |
| static u8 get_pipes_downstream_of_mst_port(struct intel_atomic_state *state, |
| struct drm_dp_mst_topology_mgr *mst_mgr, |
| struct drm_dp_mst_port *parent_port) |
| { |
| const struct intel_digital_connector_state *conn_state; |
| struct intel_connector *connector; |
| u8 mask = 0; |
| int i; |
| |
| for_each_new_intel_connector_in_state(state, connector, conn_state, i) { |
| if (!conn_state->base.crtc) |
| continue; |
| |
| if (&connector->mst_port->mst_mgr != mst_mgr) |
| continue; |
| |
| if (connector->port != parent_port && |
| !drm_dp_mst_port_downstream_of_parent(mst_mgr, |
| connector->port, |
| parent_port)) |
| continue; |
| |
| mask |= BIT(to_intel_crtc(conn_state->base.crtc)->pipe); |
| } |
| |
| return mask; |
| } |
| |
| static int intel_dp_mst_check_fec_change(struct intel_atomic_state *state, |
| struct drm_dp_mst_topology_mgr *mst_mgr, |
| struct intel_link_bw_limits *limits) |
| { |
| struct drm_i915_private *i915 = to_i915(state->base.dev); |
| struct intel_crtc *crtc; |
| u8 mst_pipe_mask; |
| u8 fec_pipe_mask = 0; |
| int ret; |
| |
| mst_pipe_mask = get_pipes_downstream_of_mst_port(state, mst_mgr, NULL); |
| |
| for_each_intel_crtc_in_pipe_mask(&i915->drm, crtc, mst_pipe_mask) { |
| struct intel_crtc_state *crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| |
| /* Atomic connector check should've added all the MST CRTCs. */ |
| if (drm_WARN_ON(&i915->drm, !crtc_state)) |
| return -EINVAL; |
| |
| if (crtc_state->fec_enable) |
| fec_pipe_mask |= BIT(crtc->pipe); |
| } |
| |
| if (!fec_pipe_mask || mst_pipe_mask == fec_pipe_mask) |
| return 0; |
| |
| limits->force_fec_pipes |= mst_pipe_mask; |
| |
| ret = intel_modeset_pipes_in_mask_early(state, "MST FEC", |
| mst_pipe_mask); |
| |
| return ret ? : -EAGAIN; |
| } |
| |
| static int intel_dp_mst_check_bw(struct intel_atomic_state *state, |
| struct drm_dp_mst_topology_mgr *mst_mgr, |
| struct drm_dp_mst_topology_state *mst_state, |
| struct intel_link_bw_limits *limits) |
| { |
| struct drm_dp_mst_port *mst_port; |
| u8 mst_port_pipes; |
| int ret; |
| |
| ret = drm_dp_mst_atomic_check_mgr(&state->base, mst_mgr, mst_state, &mst_port); |
| if (ret != -ENOSPC) |
| return ret; |
| |
| mst_port_pipes = get_pipes_downstream_of_mst_port(state, mst_mgr, mst_port); |
| |
| ret = intel_link_bw_reduce_bpp(state, limits, |
| mst_port_pipes, "MST link BW"); |
| |
| return ret ? : -EAGAIN; |
| } |
| |
| /** |
| * intel_dp_mst_atomic_check_link - check all modeset MST link configuration |
| * @state: intel atomic state |
| * @limits: link BW limits |
| * |
| * Check the link configuration for all modeset MST outputs. If the |
| * configuration is invalid @limits will be updated if possible to |
| * reduce the total BW, after which the configuration for all CRTCs in |
| * @state must be recomputed with the updated @limits. |
| * |
| * Returns: |
| * - 0 if the confugration is valid |
| * - %-EAGAIN, if the configuration is invalid and @limits got updated |
| * with fallback values with which the configuration of all CRTCs in |
| * @state must be recomputed |
| * - Other negative error, if the configuration is invalid without a |
| * fallback possibility, or the check failed for another reason |
| */ |
| int intel_dp_mst_atomic_check_link(struct intel_atomic_state *state, |
| struct intel_link_bw_limits *limits) |
| { |
| struct drm_dp_mst_topology_mgr *mgr; |
| struct drm_dp_mst_topology_state *mst_state; |
| int ret; |
| int i; |
| |
| for_each_new_mst_mgr_in_state(&state->base, mgr, mst_state, i) { |
| ret = intel_dp_mst_check_fec_change(state, mgr, limits); |
| if (ret) |
| return ret; |
| |
| ret = intel_dp_mst_check_bw(state, mgr, mst_state, |
| limits); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int intel_dp_mst_compute_config_late(struct intel_encoder *encoder, |
| struct intel_crtc_state *crtc_state, |
| struct drm_connector_state *conn_state) |
| { |
| struct intel_atomic_state *state = to_intel_atomic_state(conn_state->state); |
| struct intel_dp_mst_encoder *intel_mst = enc_to_mst(encoder); |
| struct intel_dp *intel_dp = &intel_mst->primary->dp; |
| |
| /* lowest numbered transcoder will be designated master */ |
| crtc_state->mst_master_transcoder = |
| ffs(intel_dp_mst_transcoder_mask(state, intel_dp)) - 1; |
| |
| return 0; |
| } |
| |
| /* |
| * If one of the connectors in a MST stream needs a modeset, mark all CRTCs |
| * that shares the same MST stream as mode changed, |
| * intel_modeset_pipe_config()+intel_crtc_check_fastset() will take care to do |
| * a fastset when possible. |
| * |
| * On TGL+ this is required since each stream go through a master transcoder, |
| * so if the master transcoder needs modeset, all other streams in the |
| * topology need a modeset. All platforms need to add the atomic state |
| * for all streams in the topology, since a modeset on one may require |
| * changing the MST link BW usage of the others, which in turn needs a |
| * recomputation of the corresponding CRTC states. |
| */ |
| static int |
| intel_dp_mst_atomic_topology_check(struct intel_connector *connector, |
| struct intel_atomic_state *state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(state->base.dev); |
| struct drm_connector_list_iter connector_list_iter; |
| struct intel_connector *connector_iter; |
| int ret = 0; |
| |
| if (!intel_connector_needs_modeset(state, &connector->base)) |
| return 0; |
| |
| drm_connector_list_iter_begin(&dev_priv->drm, &connector_list_iter); |
| for_each_intel_connector_iter(connector_iter, &connector_list_iter) { |
| struct intel_digital_connector_state *conn_iter_state; |
| struct intel_crtc_state *crtc_state; |
| struct intel_crtc *crtc; |
| |
| if (connector_iter->mst_port != connector->mst_port || |
| connector_iter == connector) |
| continue; |
| |
| conn_iter_state = intel_atomic_get_digital_connector_state(state, |
| connector_iter); |
| if (IS_ERR(conn_iter_state)) { |
| ret = PTR_ERR(conn_iter_state); |
| break; |
| } |
| |
| if (!conn_iter_state->base.crtc) |
| continue; |
| |
| crtc = to_intel_crtc(conn_iter_state->base.crtc); |
| crtc_state = intel_atomic_get_crtc_state(&state->base, crtc); |
| if (IS_ERR(crtc_state)) { |
| ret = PTR_ERR(crtc_state); |
| break; |
| } |
| |
| ret = drm_atomic_add_affected_planes(&state->base, &crtc->base); |
| if (ret) |
| break; |
| crtc_state->uapi.mode_changed = true; |
| } |
| drm_connector_list_iter_end(&connector_list_iter); |
| |
| return ret; |
| } |
| |
| static int |
| intel_dp_mst_atomic_check(struct drm_connector *connector, |
| struct drm_atomic_state *_state) |
| { |
| struct intel_atomic_state *state = to_intel_atomic_state(_state); |
| struct intel_connector *intel_connector = |
| to_intel_connector(connector); |
| int ret; |
| |
| ret = intel_digital_connector_atomic_check(connector, &state->base); |
| if (ret) |
| return ret; |
| |
| ret = intel_dp_mst_atomic_topology_check(intel_connector, state); |
| if (ret) |
| return ret; |
| |
| if (intel_connector_needs_modeset(state, connector)) { |
| ret = intel_dp_tunnel_atomic_check_state(state, |
| intel_connector->mst_port, |
| intel_connector); |
| if (ret) |
| return ret; |
| } |
| |
| return drm_dp_atomic_release_time_slots(&state->base, |
| &intel_connector->mst_port->mst_mgr, |
| intel_connector->port); |
| } |
| |
| static void clear_act_sent(struct intel_encoder *encoder, |
| const struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| |
| intel_de_write(i915, dp_tp_status_reg(encoder, crtc_state), |
| DP_TP_STATUS_ACT_SENT); |
| } |
| |
| static void wait_for_act_sent(struct intel_encoder *encoder, |
| const struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| struct intel_dp_mst_encoder *intel_mst = enc_to_mst(encoder); |
| struct intel_dp *intel_dp = &intel_mst->primary->dp; |
| |
| if (intel_de_wait_for_set(i915, dp_tp_status_reg(encoder, crtc_state), |
| DP_TP_STATUS_ACT_SENT, 1)) |
| drm_err(&i915->drm, "Timed out waiting for ACT sent\n"); |
| |
| drm_dp_check_act_status(&intel_dp->mst_mgr); |
| } |
| |
| static void intel_mst_disable_dp(struct intel_atomic_state *state, |
| struct intel_encoder *encoder, |
| const struct intel_crtc_state *old_crtc_state, |
| const struct drm_connector_state *old_conn_state) |
| { |
| struct intel_dp_mst_encoder *intel_mst = enc_to_mst(encoder); |
| struct intel_digital_port *dig_port = intel_mst->primary; |
| struct intel_dp *intel_dp = &dig_port->dp; |
| struct intel_connector *connector = |
| to_intel_connector(old_conn_state->connector); |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| |
| drm_dbg_kms(&i915->drm, "active links %d\n", |
| intel_dp->active_mst_links); |
| |
| if (intel_dp->active_mst_links == 1) |
| intel_dp->link_trained = false; |
| |
| intel_hdcp_disable(intel_mst->connector); |
| |
| intel_dp_sink_disable_decompression(state, connector, old_crtc_state); |
| } |
| |
| static void intel_mst_post_disable_dp(struct intel_atomic_state *state, |
| struct intel_encoder *encoder, |
| const struct intel_crtc_state *old_crtc_state, |
| const struct drm_connector_state *old_conn_state) |
| { |
| struct intel_dp_mst_encoder *intel_mst = enc_to_mst(encoder); |
| struct intel_digital_port *dig_port = intel_mst->primary; |
| struct intel_dp *intel_dp = &dig_port->dp; |
| struct intel_connector *connector = |
| to_intel_connector(old_conn_state->connector); |
| struct drm_dp_mst_topology_state *old_mst_state = |
| drm_atomic_get_old_mst_topology_state(&state->base, &intel_dp->mst_mgr); |
| struct drm_dp_mst_topology_state *new_mst_state = |
| drm_atomic_get_new_mst_topology_state(&state->base, &intel_dp->mst_mgr); |
| const struct drm_dp_mst_atomic_payload *old_payload = |
| drm_atomic_get_mst_payload_state(old_mst_state, connector->port); |
| struct drm_dp_mst_atomic_payload *new_payload = |
| drm_atomic_get_mst_payload_state(new_mst_state, connector->port); |
| struct drm_i915_private *dev_priv = to_i915(connector->base.dev); |
| struct intel_crtc *pipe_crtc; |
| bool last_mst_stream; |
| |
| intel_dp->active_mst_links--; |
| last_mst_stream = intel_dp->active_mst_links == 0; |
| drm_WARN_ON(&dev_priv->drm, |
| DISPLAY_VER(dev_priv) >= 12 && last_mst_stream && |
| !intel_dp_mst_is_master_trans(old_crtc_state)); |
| |
| for_each_intel_crtc_in_pipe_mask(&dev_priv->drm, pipe_crtc, |
| intel_crtc_joined_pipe_mask(old_crtc_state)) { |
| const struct intel_crtc_state *old_pipe_crtc_state = |
| intel_atomic_get_old_crtc_state(state, pipe_crtc); |
| |
| intel_crtc_vblank_off(old_pipe_crtc_state); |
| } |
| |
| intel_disable_transcoder(old_crtc_state); |
| |
| drm_dp_remove_payload_part1(&intel_dp->mst_mgr, new_mst_state, new_payload); |
| |
| clear_act_sent(encoder, old_crtc_state); |
| |
| intel_de_rmw(dev_priv, |
| TRANS_DDI_FUNC_CTL(dev_priv, old_crtc_state->cpu_transcoder), |
| TRANS_DDI_DP_VC_PAYLOAD_ALLOC, 0); |
| |
| wait_for_act_sent(encoder, old_crtc_state); |
| |
| drm_dp_remove_payload_part2(&intel_dp->mst_mgr, new_mst_state, |
| old_payload, new_payload); |
| |
| intel_ddi_disable_transcoder_func(old_crtc_state); |
| |
| for_each_intel_crtc_in_pipe_mask(&dev_priv->drm, pipe_crtc, |
| intel_crtc_joined_pipe_mask(old_crtc_state)) { |
| const struct intel_crtc_state *old_pipe_crtc_state = |
| intel_atomic_get_old_crtc_state(state, pipe_crtc); |
| |
| intel_dsc_disable(old_pipe_crtc_state); |
| |
| if (DISPLAY_VER(dev_priv) >= 9) |
| skl_scaler_disable(old_pipe_crtc_state); |
| else |
| ilk_pfit_disable(old_pipe_crtc_state); |
| } |
| |
| /* |
| * Power down mst path before disabling the port, otherwise we end |
| * up getting interrupts from the sink upon detecting link loss. |
| */ |
| drm_dp_send_power_updown_phy(&intel_dp->mst_mgr, connector->port, |
| false); |
| |
| /* |
| * BSpec 4287: disable DIP after the transcoder is disabled and before |
| * the transcoder clock select is set to none. |
| */ |
| intel_dp_set_infoframes(&dig_port->base, false, |
| old_crtc_state, NULL); |
| /* |
| * From TGL spec: "If multi-stream slave transcoder: Configure |
| * Transcoder Clock Select to direct no clock to the transcoder" |
| * |
| * From older GENs spec: "Configure Transcoder Clock Select to direct |
| * no clock to the transcoder" |
| */ |
| if (DISPLAY_VER(dev_priv) < 12 || !last_mst_stream) |
| intel_ddi_disable_transcoder_clock(old_crtc_state); |
| |
| |
| intel_mst->connector = NULL; |
| if (last_mst_stream) |
| dig_port->base.post_disable(state, &dig_port->base, |
| old_crtc_state, NULL); |
| |
| drm_dbg_kms(&dev_priv->drm, "active links %d\n", |
| intel_dp->active_mst_links); |
| } |
| |
| static void intel_mst_post_pll_disable_dp(struct intel_atomic_state *state, |
| struct intel_encoder *encoder, |
| const struct intel_crtc_state *old_crtc_state, |
| const struct drm_connector_state *old_conn_state) |
| { |
| struct intel_dp_mst_encoder *intel_mst = enc_to_mst(encoder); |
| struct intel_digital_port *dig_port = intel_mst->primary; |
| struct intel_dp *intel_dp = &dig_port->dp; |
| |
| if (intel_dp->active_mst_links == 0 && |
| dig_port->base.post_pll_disable) |
| dig_port->base.post_pll_disable(state, encoder, old_crtc_state, old_conn_state); |
| } |
| |
| static void intel_mst_pre_pll_enable_dp(struct intel_atomic_state *state, |
| struct intel_encoder *encoder, |
| const struct intel_crtc_state *pipe_config, |
| const struct drm_connector_state *conn_state) |
| { |
| struct intel_dp_mst_encoder *intel_mst = enc_to_mst(encoder); |
| struct intel_digital_port *dig_port = intel_mst->primary; |
| struct intel_dp *intel_dp = &dig_port->dp; |
| |
| if (intel_dp->active_mst_links == 0) |
| dig_port->base.pre_pll_enable(state, &dig_port->base, |
| pipe_config, NULL); |
| else |
| /* |
| * The port PLL state needs to get updated for secondary |
| * streams as for the primary stream. |
| */ |
| intel_ddi_update_active_dpll(state, &dig_port->base, |
| to_intel_crtc(pipe_config->uapi.crtc)); |
| } |
| |
| static void intel_mst_pre_enable_dp(struct intel_atomic_state *state, |
| struct intel_encoder *encoder, |
| const struct intel_crtc_state *pipe_config, |
| const struct drm_connector_state *conn_state) |
| { |
| struct intel_dp_mst_encoder *intel_mst = enc_to_mst(encoder); |
| struct intel_digital_port *dig_port = intel_mst->primary; |
| struct intel_dp *intel_dp = &dig_port->dp; |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| struct intel_connector *connector = |
| to_intel_connector(conn_state->connector); |
| struct drm_dp_mst_topology_state *mst_state = |
| drm_atomic_get_new_mst_topology_state(&state->base, &intel_dp->mst_mgr); |
| int ret; |
| bool first_mst_stream; |
| |
| /* MST encoders are bound to a crtc, not to a connector, |
| * force the mapping here for get_hw_state. |
| */ |
| connector->encoder = encoder; |
| intel_mst->connector = connector; |
| first_mst_stream = intel_dp->active_mst_links == 0; |
| drm_WARN_ON(&dev_priv->drm, |
| DISPLAY_VER(dev_priv) >= 12 && first_mst_stream && |
| !intel_dp_mst_is_master_trans(pipe_config)); |
| |
| drm_dbg_kms(&dev_priv->drm, "active links %d\n", |
| intel_dp->active_mst_links); |
| |
| if (first_mst_stream) |
| intel_dp_set_power(intel_dp, DP_SET_POWER_D0); |
| |
| drm_dp_send_power_updown_phy(&intel_dp->mst_mgr, connector->port, true); |
| |
| intel_dp_sink_enable_decompression(state, connector, pipe_config); |
| |
| if (first_mst_stream) |
| dig_port->base.pre_enable(state, &dig_port->base, |
| pipe_config, NULL); |
| |
| intel_dp->active_mst_links++; |
| |
| ret = drm_dp_add_payload_part1(&intel_dp->mst_mgr, mst_state, |
| drm_atomic_get_mst_payload_state(mst_state, connector->port)); |
| if (ret < 0) |
| drm_dbg_kms(&dev_priv->drm, "Failed to create MST payload for %s: %d\n", |
| connector->base.name, ret); |
| |
| /* |
| * Before Gen 12 this is not done as part of |
| * dig_port->base.pre_enable() and should be done here. For |
| * Gen 12+ the step in which this should be done is different for the |
| * first MST stream, so it's done on the DDI for the first stream and |
| * here for the following ones. |
| */ |
| if (DISPLAY_VER(dev_priv) < 12 || !first_mst_stream) |
| intel_ddi_enable_transcoder_clock(encoder, pipe_config); |
| |
| intel_dsc_dp_pps_write(&dig_port->base, pipe_config); |
| intel_ddi_set_dp_msa(pipe_config, conn_state); |
| } |
| |
| static void enable_bs_jitter_was(const struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *i915 = to_i915(crtc_state->uapi.crtc->dev); |
| u32 clear = 0; |
| u32 set = 0; |
| |
| if (!IS_ALDERLAKE_P(i915)) |
| return; |
| |
| if (!IS_DISPLAY_STEP(i915, STEP_D0, STEP_FOREVER)) |
| return; |
| |
| /* Wa_14013163432:adlp */ |
| if (crtc_state->fec_enable || intel_dp_is_uhbr(crtc_state)) |
| set |= DP_MST_FEC_BS_JITTER_WA(crtc_state->cpu_transcoder); |
| |
| /* Wa_14014143976:adlp */ |
| if (IS_DISPLAY_STEP(i915, STEP_E0, STEP_FOREVER)) { |
| if (intel_dp_is_uhbr(crtc_state)) |
| set |= DP_MST_SHORT_HBLANK_WA(crtc_state->cpu_transcoder); |
| else if (crtc_state->fec_enable) |
| clear |= DP_MST_SHORT_HBLANK_WA(crtc_state->cpu_transcoder); |
| |
| if (crtc_state->fec_enable || intel_dp_is_uhbr(crtc_state)) |
| set |= DP_MST_DPT_DPTP_ALIGN_WA(crtc_state->cpu_transcoder); |
| } |
| |
| if (!clear && !set) |
| return; |
| |
| intel_de_rmw(i915, CHICKEN_MISC_3, clear, set); |
| } |
| |
| static void intel_mst_enable_dp(struct intel_atomic_state *state, |
| struct intel_encoder *encoder, |
| const struct intel_crtc_state *pipe_config, |
| const struct drm_connector_state *conn_state) |
| { |
| struct intel_dp_mst_encoder *intel_mst = enc_to_mst(encoder); |
| struct intel_digital_port *dig_port = intel_mst->primary; |
| struct intel_dp *intel_dp = &dig_port->dp; |
| struct intel_connector *connector = to_intel_connector(conn_state->connector); |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| struct drm_dp_mst_topology_state *mst_state = |
| drm_atomic_get_new_mst_topology_state(&state->base, &intel_dp->mst_mgr); |
| enum transcoder trans = pipe_config->cpu_transcoder; |
| bool first_mst_stream = intel_dp->active_mst_links == 1; |
| struct intel_crtc *pipe_crtc; |
| |
| drm_WARN_ON(&dev_priv->drm, pipe_config->has_pch_encoder); |
| |
| if (intel_dp_is_uhbr(pipe_config)) { |
| const struct drm_display_mode *adjusted_mode = |
| &pipe_config->hw.adjusted_mode; |
| u64 crtc_clock_hz = KHz(adjusted_mode->crtc_clock); |
| |
| intel_de_write(dev_priv, TRANS_DP2_VFREQHIGH(pipe_config->cpu_transcoder), |
| TRANS_DP2_VFREQ_PIXEL_CLOCK(crtc_clock_hz >> 24)); |
| intel_de_write(dev_priv, TRANS_DP2_VFREQLOW(pipe_config->cpu_transcoder), |
| TRANS_DP2_VFREQ_PIXEL_CLOCK(crtc_clock_hz & 0xffffff)); |
| } |
| |
| enable_bs_jitter_was(pipe_config); |
| |
| intel_ddi_enable_transcoder_func(encoder, pipe_config); |
| |
| clear_act_sent(encoder, pipe_config); |
| |
| intel_de_rmw(dev_priv, TRANS_DDI_FUNC_CTL(dev_priv, trans), 0, |
| TRANS_DDI_DP_VC_PAYLOAD_ALLOC); |
| |
| drm_dbg_kms(&dev_priv->drm, "active links %d\n", |
| intel_dp->active_mst_links); |
| |
| wait_for_act_sent(encoder, pipe_config); |
| |
| if (first_mst_stream) |
| intel_ddi_wait_for_fec_status(encoder, pipe_config, true); |
| |
| drm_dp_add_payload_part2(&intel_dp->mst_mgr, |
| drm_atomic_get_mst_payload_state(mst_state, connector->port)); |
| |
| if (DISPLAY_VER(dev_priv) >= 12) |
| intel_de_rmw(dev_priv, hsw_chicken_trans_reg(dev_priv, trans), |
| FECSTALL_DIS_DPTSTREAM_DPTTG, |
| pipe_config->fec_enable ? FECSTALL_DIS_DPTSTREAM_DPTTG : 0); |
| |
| intel_audio_sdp_split_update(pipe_config); |
| |
| intel_enable_transcoder(pipe_config); |
| |
| for_each_intel_crtc_in_pipe_mask_reverse(&dev_priv->drm, pipe_crtc, |
| intel_crtc_joined_pipe_mask(pipe_config)) { |
| const struct intel_crtc_state *pipe_crtc_state = |
| intel_atomic_get_new_crtc_state(state, pipe_crtc); |
| |
| intel_crtc_vblank_on(pipe_crtc_state); |
| } |
| |
| intel_hdcp_enable(state, encoder, pipe_config, conn_state); |
| } |
| |
| static bool intel_dp_mst_enc_get_hw_state(struct intel_encoder *encoder, |
| enum pipe *pipe) |
| { |
| struct intel_dp_mst_encoder *intel_mst = enc_to_mst(encoder); |
| *pipe = intel_mst->pipe; |
| if (intel_mst->connector) |
| return true; |
| return false; |
| } |
| |
| static void intel_dp_mst_enc_get_config(struct intel_encoder *encoder, |
| struct intel_crtc_state *pipe_config) |
| { |
| struct intel_dp_mst_encoder *intel_mst = enc_to_mst(encoder); |
| struct intel_digital_port *dig_port = intel_mst->primary; |
| |
| dig_port->base.get_config(&dig_port->base, pipe_config); |
| } |
| |
| static bool intel_dp_mst_initial_fastset_check(struct intel_encoder *encoder, |
| struct intel_crtc_state *crtc_state) |
| { |
| struct intel_dp_mst_encoder *intel_mst = enc_to_mst(encoder); |
| struct intel_digital_port *dig_port = intel_mst->primary; |
| |
| return intel_dp_initial_fastset_check(&dig_port->base, crtc_state); |
| } |
| |
| static int intel_dp_mst_get_ddc_modes(struct drm_connector *connector) |
| { |
| struct intel_connector *intel_connector = to_intel_connector(connector); |
| struct drm_i915_private *i915 = to_i915(intel_connector->base.dev); |
| struct intel_dp *intel_dp = intel_connector->mst_port; |
| const struct drm_edid *drm_edid; |
| int ret; |
| |
| if (drm_connector_is_unregistered(connector)) |
| return intel_connector_update_modes(connector, NULL); |
| |
| if (!intel_display_driver_check_access(i915)) |
| return drm_edid_connector_add_modes(connector); |
| |
| drm_edid = drm_dp_mst_edid_read(connector, &intel_dp->mst_mgr, intel_connector->port); |
| |
| ret = intel_connector_update_modes(connector, drm_edid); |
| |
| drm_edid_free(drm_edid); |
| |
| return ret; |
| } |
| |
| static int |
| intel_dp_mst_connector_late_register(struct drm_connector *connector) |
| { |
| struct intel_connector *intel_connector = to_intel_connector(connector); |
| int ret; |
| |
| ret = drm_dp_mst_connector_late_register(connector, |
| intel_connector->port); |
| if (ret < 0) |
| return ret; |
| |
| ret = intel_connector_register(connector); |
| if (ret < 0) |
| drm_dp_mst_connector_early_unregister(connector, |
| intel_connector->port); |
| |
| return ret; |
| } |
| |
| static void |
| intel_dp_mst_connector_early_unregister(struct drm_connector *connector) |
| { |
| struct intel_connector *intel_connector = to_intel_connector(connector); |
| |
| intel_connector_unregister(connector); |
| drm_dp_mst_connector_early_unregister(connector, |
| intel_connector->port); |
| } |
| |
| static const struct drm_connector_funcs intel_dp_mst_connector_funcs = { |
| .fill_modes = drm_helper_probe_single_connector_modes, |
| .atomic_get_property = intel_digital_connector_atomic_get_property, |
| .atomic_set_property = intel_digital_connector_atomic_set_property, |
| .late_register = intel_dp_mst_connector_late_register, |
| .early_unregister = intel_dp_mst_connector_early_unregister, |
| .destroy = intel_connector_destroy, |
| .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, |
| .atomic_duplicate_state = intel_digital_connector_duplicate_state, |
| }; |
| |
| static int intel_dp_mst_get_modes(struct drm_connector *connector) |
| { |
| return intel_dp_mst_get_ddc_modes(connector); |
| } |
| |
| static int |
| intel_dp_mst_mode_valid_ctx(struct drm_connector *connector, |
| struct drm_display_mode *mode, |
| struct drm_modeset_acquire_ctx *ctx, |
| enum drm_mode_status *status) |
| { |
| struct drm_i915_private *dev_priv = to_i915(connector->dev); |
| struct intel_connector *intel_connector = to_intel_connector(connector); |
| struct intel_dp *intel_dp = intel_connector->mst_port; |
| struct drm_dp_mst_topology_mgr *mgr = &intel_dp->mst_mgr; |
| struct drm_dp_mst_port *port = intel_connector->port; |
| const int min_bpp = 18; |
| int max_dotclk = to_i915(connector->dev)->display.cdclk.max_dotclk_freq; |
| int max_rate, mode_rate, max_lanes, max_link_clock; |
| int ret; |
| bool dsc = false, joiner = false; |
| u16 dsc_max_compressed_bpp = 0; |
| u8 dsc_slice_count = 0; |
| int target_clock = mode->clock; |
| |
| if (drm_connector_is_unregistered(connector)) { |
| *status = MODE_ERROR; |
| return 0; |
| } |
| |
| *status = intel_cpu_transcoder_mode_valid(dev_priv, mode); |
| if (*status != MODE_OK) |
| return 0; |
| |
| if (mode->flags & DRM_MODE_FLAG_DBLCLK) { |
| *status = MODE_H_ILLEGAL; |
| return 0; |
| } |
| |
| if (mode->clock < 10000) { |
| *status = MODE_CLOCK_LOW; |
| return 0; |
| } |
| |
| max_link_clock = intel_dp_max_link_rate(intel_dp); |
| max_lanes = intel_dp_max_lane_count(intel_dp); |
| |
| max_rate = intel_dp_max_link_data_rate(intel_dp, |
| max_link_clock, max_lanes); |
| mode_rate = intel_dp_link_required(mode->clock, min_bpp); |
| |
| /* |
| * TODO: |
| * - Also check if compression would allow for the mode |
| * - Calculate the overhead using drm_dp_bw_overhead() / |
| * drm_dp_bw_channel_coding_efficiency(), similarly to the |
| * compute config code, as drm_dp_calc_pbn_mode() doesn't |
| * account with all the overheads. |
| * - Check here and during compute config the BW reported by |
| * DFP_Link_Available_Payload_Bandwidth_Number (or the |
| * corresponding link capabilities of the sink) in case the |
| * stream is uncompressed for it by the last branch device. |
| */ |
| if (intel_dp_need_joiner(intel_dp, intel_connector, |
| mode->hdisplay, target_clock)) { |
| joiner = true; |
| max_dotclk *= 2; |
| } |
| |
| ret = drm_modeset_lock(&mgr->base.lock, ctx); |
| if (ret) |
| return ret; |
| |
| if (mode_rate > max_rate || mode->clock > max_dotclk || |
| drm_dp_calc_pbn_mode(mode->clock, min_bpp << 4) > port->full_pbn) { |
| *status = MODE_CLOCK_HIGH; |
| return 0; |
| } |
| |
| if (intel_dp_has_dsc(intel_connector)) { |
| /* |
| * TBD pass the connector BPC, |
| * for now U8_MAX so that max BPC on that platform would be picked |
| */ |
| int pipe_bpp = intel_dp_dsc_compute_max_bpp(intel_connector, U8_MAX); |
| |
| if (drm_dp_sink_supports_fec(intel_connector->dp.fec_capability)) { |
| dsc_max_compressed_bpp = |
| intel_dp_dsc_get_max_compressed_bpp(dev_priv, |
| max_link_clock, |
| max_lanes, |
| target_clock, |
| mode->hdisplay, |
| joiner, |
| INTEL_OUTPUT_FORMAT_RGB, |
| pipe_bpp, 64); |
| dsc_slice_count = |
| intel_dp_dsc_get_slice_count(intel_connector, |
| target_clock, |
| mode->hdisplay, |
| joiner); |
| } |
| |
| dsc = dsc_max_compressed_bpp && dsc_slice_count; |
| } |
| |
| if (intel_dp_joiner_needs_dsc(dev_priv, joiner) && !dsc) { |
| *status = MODE_CLOCK_HIGH; |
| return 0; |
| } |
| |
| if (mode_rate > max_rate && !dsc) { |
| *status = MODE_CLOCK_HIGH; |
| return 0; |
| } |
| |
| *status = intel_mode_valid_max_plane_size(dev_priv, mode, joiner); |
| return 0; |
| } |
| |
| static struct drm_encoder *intel_mst_atomic_best_encoder(struct drm_connector *connector, |
| struct drm_atomic_state *state) |
| { |
| struct drm_connector_state *connector_state = drm_atomic_get_new_connector_state(state, |
| connector); |
| struct intel_connector *intel_connector = to_intel_connector(connector); |
| struct intel_dp *intel_dp = intel_connector->mst_port; |
| struct intel_crtc *crtc = to_intel_crtc(connector_state->crtc); |
| |
| return &intel_dp->mst_encoders[crtc->pipe]->base.base; |
| } |
| |
| static int |
| intel_dp_mst_detect(struct drm_connector *connector, |
| struct drm_modeset_acquire_ctx *ctx, bool force) |
| { |
| struct drm_i915_private *i915 = to_i915(connector->dev); |
| struct intel_connector *intel_connector = to_intel_connector(connector); |
| struct intel_dp *intel_dp = intel_connector->mst_port; |
| |
| if (!intel_display_device_enabled(i915)) |
| return connector_status_disconnected; |
| |
| if (drm_connector_is_unregistered(connector)) |
| return connector_status_disconnected; |
| |
| if (!intel_display_driver_check_access(i915)) |
| return connector->status; |
| |
| return drm_dp_mst_detect_port(connector, ctx, &intel_dp->mst_mgr, |
| intel_connector->port); |
| } |
| |
| static const struct drm_connector_helper_funcs intel_dp_mst_connector_helper_funcs = { |
| .get_modes = intel_dp_mst_get_modes, |
| .mode_valid_ctx = intel_dp_mst_mode_valid_ctx, |
| .atomic_best_encoder = intel_mst_atomic_best_encoder, |
| .atomic_check = intel_dp_mst_atomic_check, |
| .detect_ctx = intel_dp_mst_detect, |
| }; |
| |
| static void intel_dp_mst_encoder_destroy(struct drm_encoder *encoder) |
| { |
| struct intel_dp_mst_encoder *intel_mst = enc_to_mst(to_intel_encoder(encoder)); |
| |
| drm_encoder_cleanup(encoder); |
| kfree(intel_mst); |
| } |
| |
| static const struct drm_encoder_funcs intel_dp_mst_enc_funcs = { |
| .destroy = intel_dp_mst_encoder_destroy, |
| }; |
| |
| static bool intel_dp_mst_get_hw_state(struct intel_connector *connector) |
| { |
| if (intel_attached_encoder(connector) && connector->base.state->crtc) { |
| enum pipe pipe; |
| if (!intel_attached_encoder(connector)->get_hw_state(intel_attached_encoder(connector), &pipe)) |
| return false; |
| return true; |
| } |
| return false; |
| } |
| |
| static int intel_dp_mst_add_properties(struct intel_dp *intel_dp, |
| struct drm_connector *connector, |
| const char *pathprop) |
| { |
| struct drm_i915_private *i915 = to_i915(connector->dev); |
| |
| drm_object_attach_property(&connector->base, |
| i915->drm.mode_config.path_property, 0); |
| drm_object_attach_property(&connector->base, |
| i915->drm.mode_config.tile_property, 0); |
| |
| intel_attach_force_audio_property(connector); |
| intel_attach_broadcast_rgb_property(connector); |
| |
| /* |
| * Reuse the prop from the SST connector because we're |
| * not allowed to create new props after device registration. |
| */ |
| connector->max_bpc_property = |
| intel_dp->attached_connector->base.max_bpc_property; |
| if (connector->max_bpc_property) |
| drm_connector_attach_max_bpc_property(connector, 6, 12); |
| |
| return drm_connector_set_path_property(connector, pathprop); |
| } |
| |
| static void |
| intel_dp_mst_read_decompression_port_dsc_caps(struct intel_dp *intel_dp, |
| struct intel_connector *connector) |
| { |
| u8 dpcd_caps[DP_RECEIVER_CAP_SIZE]; |
| |
| if (!connector->dp.dsc_decompression_aux) |
| return; |
| |
| if (drm_dp_read_dpcd_caps(connector->dp.dsc_decompression_aux, dpcd_caps) < 0) |
| return; |
| |
| intel_dp_get_dsc_sink_cap(dpcd_caps[DP_DPCD_REV], connector); |
| } |
| |
| static bool detect_dsc_hblank_expansion_quirk(const struct intel_connector *connector) |
| { |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct drm_dp_aux *aux = connector->dp.dsc_decompression_aux; |
| struct drm_dp_desc desc; |
| u8 dpcd[DP_RECEIVER_CAP_SIZE]; |
| |
| if (!aux) |
| return false; |
| |
| /* |
| * A logical port's OUI (at least for affected sinks) is all 0, so |
| * instead of that the parent port's OUI is used for identification. |
| */ |
| if (drm_dp_mst_port_is_logical(connector->port)) { |
| aux = drm_dp_mst_aux_for_parent(connector->port); |
| if (!aux) |
| aux = &connector->mst_port->aux; |
| } |
| |
| if (drm_dp_read_dpcd_caps(aux, dpcd) < 0) |
| return false; |
| |
| if (drm_dp_read_desc(aux, &desc, drm_dp_is_branch(dpcd)) < 0) |
| return false; |
| |
| if (!drm_dp_has_quirk(&desc, |
| DP_DPCD_QUIRK_HBLANK_EXPANSION_REQUIRES_DSC)) |
| return false; |
| |
| /* |
| * UHBR (MST sink) devices requiring this quirk don't advertise the |
| * HBLANK expansion support. Presuming that they perform HBLANK |
| * expansion internally, or are affected by this issue on modes with a |
| * short HBLANK for other reasons. |
| */ |
| if (!drm_dp_128b132b_supported(dpcd) && |
| !(dpcd[DP_RECEIVE_PORT_0_CAP_0] & DP_HBLANK_EXPANSION_CAPABLE)) |
| return false; |
| |
| drm_dbg_kms(&i915->drm, |
| "[CONNECTOR:%d:%s] DSC HBLANK expansion quirk detected\n", |
| connector->base.base.id, connector->base.name); |
| |
| return true; |
| } |
| |
| static struct drm_connector *intel_dp_add_mst_connector(struct drm_dp_mst_topology_mgr *mgr, |
| struct drm_dp_mst_port *port, |
| const char *pathprop) |
| { |
| struct intel_dp *intel_dp = container_of(mgr, struct intel_dp, mst_mgr); |
| struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); |
| struct drm_device *dev = dig_port->base.base.dev; |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| struct intel_connector *intel_connector; |
| struct drm_connector *connector; |
| enum pipe pipe; |
| int ret; |
| |
| intel_connector = intel_connector_alloc(); |
| if (!intel_connector) |
| return NULL; |
| |
| intel_connector->get_hw_state = intel_dp_mst_get_hw_state; |
| intel_connector->sync_state = intel_dp_connector_sync_state; |
| intel_connector->mst_port = intel_dp; |
| intel_connector->port = port; |
| drm_dp_mst_get_port_malloc(port); |
| |
| intel_dp_init_modeset_retry_work(intel_connector); |
| |
| intel_connector->dp.dsc_decompression_aux = drm_dp_mst_dsc_aux_for_port(port); |
| intel_dp_mst_read_decompression_port_dsc_caps(intel_dp, intel_connector); |
| intel_connector->dp.dsc_hblank_expansion_quirk = |
| detect_dsc_hblank_expansion_quirk(intel_connector); |
| |
| connector = &intel_connector->base; |
| ret = drm_connector_init(dev, connector, &intel_dp_mst_connector_funcs, |
| DRM_MODE_CONNECTOR_DisplayPort); |
| if (ret) { |
| drm_dp_mst_put_port_malloc(port); |
| intel_connector_free(intel_connector); |
| return NULL; |
| } |
| |
| drm_connector_helper_add(connector, &intel_dp_mst_connector_helper_funcs); |
| |
| for_each_pipe(dev_priv, pipe) { |
| struct drm_encoder *enc = |
| &intel_dp->mst_encoders[pipe]->base.base; |
| |
| ret = drm_connector_attach_encoder(&intel_connector->base, enc); |
| if (ret) |
| goto err; |
| } |
| |
| ret = intel_dp_mst_add_properties(intel_dp, connector, pathprop); |
| if (ret) |
| goto err; |
| |
| ret = intel_dp_hdcp_init(dig_port, intel_connector); |
| if (ret) |
| drm_dbg_kms(&dev_priv->drm, "[%s:%d] HDCP MST init failed, skipping.\n", |
| connector->name, connector->base.id); |
| |
| return connector; |
| |
| err: |
| drm_connector_cleanup(connector); |
| return NULL; |
| } |
| |
| static void |
| intel_dp_mst_poll_hpd_irq(struct drm_dp_mst_topology_mgr *mgr) |
| { |
| struct intel_dp *intel_dp = container_of(mgr, struct intel_dp, mst_mgr); |
| |
| intel_hpd_trigger_irq(dp_to_dig_port(intel_dp)); |
| } |
| |
| static const struct drm_dp_mst_topology_cbs mst_cbs = { |
| .add_connector = intel_dp_add_mst_connector, |
| .poll_hpd_irq = intel_dp_mst_poll_hpd_irq, |
| }; |
| |
| static struct intel_dp_mst_encoder * |
| intel_dp_create_fake_mst_encoder(struct intel_digital_port *dig_port, enum pipe pipe) |
| { |
| struct intel_dp_mst_encoder *intel_mst; |
| struct intel_encoder *intel_encoder; |
| struct drm_device *dev = dig_port->base.base.dev; |
| |
| intel_mst = kzalloc(sizeof(*intel_mst), GFP_KERNEL); |
| |
| if (!intel_mst) |
| return NULL; |
| |
| intel_mst->pipe = pipe; |
| intel_encoder = &intel_mst->base; |
| intel_mst->primary = dig_port; |
| |
| drm_encoder_init(dev, &intel_encoder->base, &intel_dp_mst_enc_funcs, |
| DRM_MODE_ENCODER_DPMST, "DP-MST %c", pipe_name(pipe)); |
| |
| intel_encoder->type = INTEL_OUTPUT_DP_MST; |
| intel_encoder->power_domain = dig_port->base.power_domain; |
| intel_encoder->port = dig_port->base.port; |
| intel_encoder->cloneable = 0; |
| /* |
| * This is wrong, but broken userspace uses the intersection |
| * of possible_crtcs of all the encoders of a given connector |
| * to figure out which crtcs can drive said connector. What |
| * should be used instead is the union of possible_crtcs. |
| * To keep such userspace functioning we must misconfigure |
| * this to make sure the intersection is not empty :( |
| */ |
| intel_encoder->pipe_mask = ~0; |
| |
| intel_encoder->compute_config = intel_dp_mst_compute_config; |
| intel_encoder->compute_config_late = intel_dp_mst_compute_config_late; |
| intel_encoder->disable = intel_mst_disable_dp; |
| intel_encoder->post_disable = intel_mst_post_disable_dp; |
| intel_encoder->post_pll_disable = intel_mst_post_pll_disable_dp; |
| intel_encoder->update_pipe = intel_ddi_update_pipe; |
| intel_encoder->pre_pll_enable = intel_mst_pre_pll_enable_dp; |
| intel_encoder->pre_enable = intel_mst_pre_enable_dp; |
| intel_encoder->enable = intel_mst_enable_dp; |
| intel_encoder->audio_enable = intel_audio_codec_enable; |
| intel_encoder->audio_disable = intel_audio_codec_disable; |
| intel_encoder->get_hw_state = intel_dp_mst_enc_get_hw_state; |
| intel_encoder->get_config = intel_dp_mst_enc_get_config; |
| intel_encoder->initial_fastset_check = intel_dp_mst_initial_fastset_check; |
| |
| return intel_mst; |
| |
| } |
| |
| static bool |
| intel_dp_create_fake_mst_encoders(struct intel_digital_port *dig_port) |
| { |
| struct intel_dp *intel_dp = &dig_port->dp; |
| struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev); |
| enum pipe pipe; |
| |
| for_each_pipe(dev_priv, pipe) |
| intel_dp->mst_encoders[pipe] = intel_dp_create_fake_mst_encoder(dig_port, pipe); |
| return true; |
| } |
| |
| int |
| intel_dp_mst_encoder_active_links(struct intel_digital_port *dig_port) |
| { |
| return dig_port->dp.active_mst_links; |
| } |
| |
| int |
| intel_dp_mst_encoder_init(struct intel_digital_port *dig_port, int conn_base_id) |
| { |
| struct drm_i915_private *i915 = to_i915(dig_port->base.base.dev); |
| struct intel_dp *intel_dp = &dig_port->dp; |
| enum port port = dig_port->base.port; |
| int ret; |
| |
| if (!HAS_DP_MST(i915) || intel_dp_is_edp(intel_dp)) |
| return 0; |
| |
| if (DISPLAY_VER(i915) < 12 && port == PORT_A) |
| return 0; |
| |
| if (DISPLAY_VER(i915) < 11 && port == PORT_E) |
| return 0; |
| |
| intel_dp->mst_mgr.cbs = &mst_cbs; |
| |
| /* create encoders */ |
| intel_dp_create_fake_mst_encoders(dig_port); |
| ret = drm_dp_mst_topology_mgr_init(&intel_dp->mst_mgr, &i915->drm, |
| &intel_dp->aux, 16, 3, conn_base_id); |
| if (ret) { |
| intel_dp->mst_mgr.cbs = NULL; |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| bool intel_dp_mst_source_support(struct intel_dp *intel_dp) |
| { |
| return intel_dp->mst_mgr.cbs; |
| } |
| |
| void |
| intel_dp_mst_encoder_cleanup(struct intel_digital_port *dig_port) |
| { |
| struct intel_dp *intel_dp = &dig_port->dp; |
| |
| if (!intel_dp_mst_source_support(intel_dp)) |
| return; |
| |
| drm_dp_mst_topology_mgr_destroy(&intel_dp->mst_mgr); |
| /* encoders will get killed by normal cleanup */ |
| |
| intel_dp->mst_mgr.cbs = NULL; |
| } |
| |
| bool intel_dp_mst_is_master_trans(const struct intel_crtc_state *crtc_state) |
| { |
| return crtc_state->mst_master_transcoder == crtc_state->cpu_transcoder; |
| } |
| |
| bool intel_dp_mst_is_slave_trans(const struct intel_crtc_state *crtc_state) |
| { |
| return crtc_state->mst_master_transcoder != INVALID_TRANSCODER && |
| crtc_state->mst_master_transcoder != crtc_state->cpu_transcoder; |
| } |
| |
| /** |
| * intel_dp_mst_add_topology_state_for_connector - add MST topology state for a connector |
| * @state: atomic state |
| * @connector: connector to add the state for |
| * @crtc: the CRTC @connector is attached to |
| * |
| * Add the MST topology state for @connector to @state. |
| * |
| * Returns 0 on success, negative error code on failure. |
| */ |
| static int |
| intel_dp_mst_add_topology_state_for_connector(struct intel_atomic_state *state, |
| struct intel_connector *connector, |
| struct intel_crtc *crtc) |
| { |
| struct drm_dp_mst_topology_state *mst_state; |
| |
| if (!connector->mst_port) |
| return 0; |
| |
| mst_state = drm_atomic_get_mst_topology_state(&state->base, |
| &connector->mst_port->mst_mgr); |
| if (IS_ERR(mst_state)) |
| return PTR_ERR(mst_state); |
| |
| mst_state->pending_crtc_mask |= drm_crtc_mask(&crtc->base); |
| |
| return 0; |
| } |
| |
| /** |
| * intel_dp_mst_add_topology_state_for_crtc - add MST topology state for a CRTC |
| * @state: atomic state |
| * @crtc: CRTC to add the state for |
| * |
| * Add the MST topology state for @crtc to @state. |
| * |
| * Returns 0 on success, negative error code on failure. |
| */ |
| int intel_dp_mst_add_topology_state_for_crtc(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| struct drm_connector *_connector; |
| struct drm_connector_state *conn_state; |
| int i; |
| |
| for_each_new_connector_in_state(&state->base, _connector, conn_state, i) { |
| struct intel_connector *connector = to_intel_connector(_connector); |
| int ret; |
| |
| if (conn_state->crtc != &crtc->base) |
| continue; |
| |
| ret = intel_dp_mst_add_topology_state_for_connector(state, connector, crtc); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static struct intel_connector * |
| get_connector_in_state_for_crtc(struct intel_atomic_state *state, |
| const struct intel_crtc *crtc) |
| { |
| struct drm_connector_state *old_conn_state; |
| struct drm_connector_state *new_conn_state; |
| struct drm_connector *_connector; |
| int i; |
| |
| for_each_oldnew_connector_in_state(&state->base, _connector, |
| old_conn_state, new_conn_state, i) { |
| struct intel_connector *connector = |
| to_intel_connector(_connector); |
| |
| if (old_conn_state->crtc == &crtc->base || |
| new_conn_state->crtc == &crtc->base) |
| return connector; |
| } |
| |
| return NULL; |
| } |
| |
| /** |
| * intel_dp_mst_crtc_needs_modeset - check if changes in topology need to modeset the given CRTC |
| * @state: atomic state |
| * @crtc: CRTC for which to check the modeset requirement |
| * |
| * Check if any change in a MST topology requires a forced modeset on @crtc in |
| * this topology. One such change is enabling/disabling the DSC decompression |
| * state in the first branch device's UFP DPCD as required by one CRTC, while |
| * the other @crtc in the same topology is still active, requiring a full modeset |
| * on @crtc. |
| */ |
| bool intel_dp_mst_crtc_needs_modeset(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| const struct intel_connector *crtc_connector; |
| const struct drm_connector_state *conn_state; |
| const struct drm_connector *_connector; |
| int i; |
| |
| if (!intel_crtc_has_type(intel_atomic_get_new_crtc_state(state, crtc), |
| INTEL_OUTPUT_DP_MST)) |
| return false; |
| |
| crtc_connector = get_connector_in_state_for_crtc(state, crtc); |
| |
| if (!crtc_connector) |
| /* None of the connectors in the topology needs modeset */ |
| return false; |
| |
| for_each_new_connector_in_state(&state->base, _connector, conn_state, i) { |
| const struct intel_connector *connector = |
| to_intel_connector(_connector); |
| const struct intel_crtc_state *new_crtc_state; |
| const struct intel_crtc_state *old_crtc_state; |
| struct intel_crtc *crtc_iter; |
| |
| if (connector->mst_port != crtc_connector->mst_port || |
| !conn_state->crtc) |
| continue; |
| |
| crtc_iter = to_intel_crtc(conn_state->crtc); |
| |
| new_crtc_state = intel_atomic_get_new_crtc_state(state, crtc_iter); |
| old_crtc_state = intel_atomic_get_old_crtc_state(state, crtc_iter); |
| |
| if (!intel_crtc_needs_modeset(new_crtc_state)) |
| continue; |
| |
| if (old_crtc_state->dsc.compression_enable == |
| new_crtc_state->dsc.compression_enable) |
| continue; |
| /* |
| * Toggling the decompression flag because of this stream in |
| * the first downstream branch device's UFP DPCD may reset the |
| * whole branch device. To avoid the reset while other streams |
| * are also active modeset the whole MST topology in this |
| * case. |
| */ |
| if (connector->dp.dsc_decompression_aux == |
| &connector->mst_port->aux) |
| return true; |
| } |
| |
| return false; |
| } |