| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Device Tree Source for the R7S9210 SoC |
| * |
| * Copyright (C) 2018 Renesas Electronics Corporation |
| * |
| */ |
| |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/clock/r7s9210-cpg-mssr.h> |
| |
| / { |
| compatible = "renesas,r7s9210"; |
| interrupt-parent = <&gic>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| /* External clocks */ |
| extal_clk: extal { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| /* Value must be set by board */ |
| clock-frequency = <0>; |
| }; |
| |
| rtc_x1_clk: rtc_x1 { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| /* If clk present, value (32678) must be set by board */ |
| clock-frequency = <0>; |
| }; |
| |
| usb_x1_clk: usb_x1 { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| /* If clk present, value (48000000) must be set by board */ |
| clock-frequency = <0>; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a9"; |
| reg = <0>; |
| clock-frequency = <528000000>; |
| next-level-cache = <&L2>; |
| }; |
| }; |
| |
| soc { |
| compatible = "simple-bus"; |
| interrupt-parent = <&gic>; |
| |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| L2: cache-controller@1f003000 { |
| compatible = "arm,pl310-cache"; |
| reg = <0x1f003000 0x1000>; |
| interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; |
| arm,early-bresp-disable; |
| arm,full-line-zero-disable; |
| cache-unified; |
| cache-level = <2>; |
| }; |
| |
| scif0: serial@e8007000 { |
| compatible = "renesas,scif-r7s9210"; |
| reg = <0xe8007000 0x18>; |
| interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "eri", "rxi", "txi", |
| "bri", "dri", "tei"; |
| clocks = <&cpg CPG_MOD 47>; |
| clock-names = "fck"; |
| power-domains = <&cpg>; |
| status = "disabled"; |
| }; |
| |
| scif1: serial@e8007800 { |
| compatible = "renesas,scif-r7s9210"; |
| reg = <0xe8007800 0x18>; |
| interrupts = <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "eri", "rxi", "txi", |
| "bri", "dri", "tei"; |
| clocks = <&cpg CPG_MOD 46>; |
| clock-names = "fck"; |
| power-domains = <&cpg>; |
| status = "disabled"; |
| }; |
| |
| scif2: serial@e8008000 { |
| compatible = "renesas,scif-r7s9210"; |
| reg = <0xe8008000 0x18>; |
| interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "eri", "rxi", "txi", |
| "bri", "dri", "tei"; |
| clocks = <&cpg CPG_MOD 45>; |
| clock-names = "fck"; |
| power-domains = <&cpg>; |
| status = "disabled"; |
| }; |
| |
| scif3: serial@e8008800 { |
| compatible = "renesas,scif-r7s9210"; |
| reg = <0xe8008800 0x18>; |
| interrupts = <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "eri", "rxi", "txi", |
| "bri", "dri", "tei"; |
| clocks = <&cpg CPG_MOD 44>; |
| clock-names = "fck"; |
| power-domains = <&cpg>; |
| status = "disabled"; |
| }; |
| |
| scif4: serial@e8009000 { |
| compatible = "renesas,scif-r7s9210"; |
| reg = <0xe8009000 0x18>; |
| interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "eri", "rxi", "txi", |
| "bri", "dri", "tei"; |
| clocks = <&cpg CPG_MOD 43>; |
| clock-names = "fck"; |
| power-domains = <&cpg>; |
| status = "disabled"; |
| }; |
| |
| spi0: spi@e800c800 { |
| compatible = "renesas,rspi-r7s9210", "renesas,rspi-rz"; |
| reg = <0xe800c800 0x24>; |
| interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "error", "rx", "tx"; |
| clocks = <&cpg CPG_MOD 97>; |
| power-domains = <&cpg>; |
| num-cs = <1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi1: spi@e800d000 { |
| compatible = "renesas,rspi-r7s9210", "renesas,rspi-rz"; |
| reg = <0xe800d000 0x24>; |
| interrupts = <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "error", "rx", "tx"; |
| clocks = <&cpg CPG_MOD 96>; |
| power-domains = <&cpg>; |
| num-cs = <1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi2: spi@e800d800 { |
| compatible = "renesas,rspi-r7s9210", "renesas,rspi-rz"; |
| reg = <0xe800d800 0x24>; |
| interrupts = <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "error", "rx", "tx"; |
| clocks = <&cpg CPG_MOD 95>; |
| power-domains = <&cpg>; |
| num-cs = <1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| ether0: ethernet@e8204000 { |
| compatible = "renesas,ether-r7s9210"; |
| reg = <0xe8204000 0x200>; |
| interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cpg CPG_MOD 65>; |
| power-domains = <&cpg>; |
| |
| phy-mode = "rmii"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| ether1: ethernet@e8204200 { |
| compatible = "renesas,ether-r7s9210"; |
| reg = <0xe8204200 0x200>; |
| interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cpg CPG_MOD 64>; |
| power-domains = <&cpg>; |
| phy-mode = "rmii"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c0: i2c@e803a000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "renesas,riic-r7s9210", "renesas,riic-rz"; |
| reg = <0xe803a000 0x44>; |
| interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 233 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 234 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cpg CPG_MOD 87>; |
| power-domains = <&cpg>; |
| clock-frequency = <100000>; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@e803a400 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "renesas,riic-r7s9210", "renesas,riic-rz"; |
| reg = <0xe803a400 0x44>; |
| interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 241 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 242 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cpg CPG_MOD 86>; |
| power-domains = <&cpg>; |
| clock-frequency = <100000>; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@e803a800 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "renesas,riic-r7s9210", "renesas,riic-rz"; |
| reg = <0xe803a800 0x44>; |
| interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 249 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 250 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cpg CPG_MOD 85>; |
| power-domains = <&cpg>; |
| clock-frequency = <100000>; |
| status = "disabled"; |
| }; |
| |
| i2c3: i2c@e803ac00 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "renesas,riic-r7s9210", "renesas,riic-rz"; |
| reg = <0xe803ac00 0x44>; |
| interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 257 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 258 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cpg CPG_MOD 84>; |
| power-domains = <&cpg>; |
| clock-frequency = <100000>; |
| status = "disabled"; |
| }; |
| |
| ostm0: timer@e803b000 { |
| compatible = "renesas,r7s9210-ostm", "renesas,ostm"; |
| reg = <0xe803b000 0x30>; |
| interrupts = <GIC_SPI 56 IRQ_TYPE_EDGE_RISING>; |
| clocks = <&cpg CPG_MOD 36>; |
| clock-names = "ostm0"; |
| power-domains = <&cpg>; |
| status = "disabled"; |
| }; |
| |
| ostm1: timer@e803c000 { |
| compatible = "renesas,r7s9210-ostm", "renesas,ostm"; |
| reg = <0xe803c000 0x30>; |
| interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>; |
| clocks = <&cpg CPG_MOD 35>; |
| clock-names = "ostm1"; |
| power-domains = <&cpg>; |
| status = "disabled"; |
| }; |
| |
| ostm2: timer@e803d000 { |
| compatible = "renesas,r7s9210-ostm", "renesas,ostm"; |
| reg = <0xe803d000 0x30>; |
| interrupts = <GIC_SPI 58 IRQ_TYPE_EDGE_RISING>; |
| clocks = <&cpg CPG_MOD 34>; |
| clock-names = "ostm2"; |
| power-domains = <&cpg>; |
| status = "disabled"; |
| }; |
| |
| ohci0: usb@e8218000 { |
| compatible = "generic-ohci"; |
| reg = <0xe8218000 0x100>; |
| interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cpg CPG_MOD 61>; |
| phys = <&usb2_phy0>; |
| phy-names = "usb"; |
| power-domains = <&cpg>; |
| status = "disabled"; |
| }; |
| |
| ehci0: usb@e8218100 { |
| compatible = "generic-ehci"; |
| reg = <0xe8218100 0x100>; |
| interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cpg CPG_MOD 61>; |
| phys = <&usb2_phy0>; |
| phy-names = "usb"; |
| power-domains = <&cpg>; |
| status = "disabled"; |
| }; |
| |
| usb2_phy0: usb-phy@e8218200 { |
| compatible = "renesas,usb2-phy-r7s9210", "renesas,rcar-gen3-usb2-phy"; |
| reg = <0xe8218200 0x700>; |
| interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cpg CPG_MOD 61>, <&usb_x1_clk>; |
| clock-names = "fck", "usb_x1"; |
| power-domains = <&cpg>; |
| #phy-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| usbhs0: usb@e8219000 { |
| compatible = "renesas,usbhs-r7s9210", "renesas,rza2-usbhs"; |
| reg = <0xe8219000 0x724>; |
| interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cpg CPG_MOD 61>; |
| renesas,buswait = <7>; |
| phys = <&usb2_phy0>; |
| phy-names = "usb"; |
| power-domains = <&cpg>; |
| status = "disabled"; |
| }; |
| |
| ohci1: usb@e821a000 { |
| compatible = "generic-ohci"; |
| reg = <0xe821a000 0x100>; |
| interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cpg CPG_MOD 60>; |
| phys = <&usb2_phy1>; |
| phy-names = "usb"; |
| power-domains = <&cpg>; |
| status = "disabled"; |
| }; |
| |
| ehci1: usb@e821a100 { |
| compatible = "generic-ehci"; |
| reg = <0xe821a100 0x100>; |
| interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cpg CPG_MOD 60>; |
| phys = <&usb2_phy1>; |
| phy-names = "usb"; |
| power-domains = <&cpg>; |
| status = "disabled"; |
| }; |
| |
| usb2_phy1: usb-phy@e821a200 { |
| compatible = "renesas,usb2-phy-r7s9210", "renesas,rcar-gen3-usb2-phy"; |
| reg = <0xe821a200 0x700>; |
| interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cpg CPG_MOD 60>, <&usb_x1_clk>; |
| clock-names = "fck", "usb_x1"; |
| power-domains = <&cpg>; |
| #phy-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| usbhs1: usb@e821b000 { |
| compatible = "renesas,usbhs-r7s9210", "renesas,rza2-usbhs"; |
| reg = <0xe821b000 0x724>; |
| interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cpg CPG_MOD 60>; |
| renesas,buswait = <7>; |
| phys = <&usb2_phy1>; |
| phy-names = "usb"; |
| power-domains = <&cpg>; |
| status = "disabled"; |
| }; |
| |
| sdhi0: sd@e8228000 { |
| compatible = "renesas,sdhi-r7s9210"; |
| reg = <0xe8228000 0x8c0>; |
| interrupts = <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cpg CPG_MOD 103>, <&cpg CPG_MOD 102>; |
| clock-names = "core", "cd"; |
| power-domains = <&cpg>; |
| cap-sd-highspeed; |
| cap-sdio-irq; |
| status = "disabled"; |
| }; |
| |
| sdhi1: sd@e822a000 { |
| compatible = "renesas,sdhi-r7s9210"; |
| reg = <0xe822a000 0x8c0>; |
| interrupts = <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cpg CPG_MOD 101>, <&cpg CPG_MOD 100>; |
| clock-names = "core", "cd"; |
| power-domains = <&cpg>; |
| cap-sd-highspeed; |
| cap-sdio-irq; |
| status = "disabled"; |
| }; |
| |
| gic: interrupt-controller@e8221000 { |
| compatible = "arm,gic-400"; |
| #interrupt-cells = <3>; |
| #address-cells = <0>; |
| interrupt-controller; |
| reg = <0xe8221000 0x1000>, |
| <0xe8222000 0x1000>; |
| }; |
| |
| cpg: clock-controller@fcfe0010 { |
| compatible = "renesas,r7s9210-cpg-mssr"; |
| reg = <0xfcfe0010 0x455>; |
| clocks = <&extal_clk>; |
| clock-names = "extal"; |
| #clock-cells = <2>; |
| #power-domain-cells = <0>; |
| }; |
| |
| wdt: watchdog@fcfe7000 { |
| compatible = "renesas,r7s9210-wdt", "renesas,rza-wdt"; |
| reg = <0xfcfe7000 0x26>; |
| interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cpg CPG_CORE R7S9210_CLK_P0>; |
| }; |
| |
| bsid: chipid@fcfe8004 { |
| compatible = "renesas,bsid"; |
| reg = <0xfcfe8004 4>; |
| }; |
| |
| irqc: interrupt-controller@fcfef800 { |
| compatible = "renesas,r7s9210-irqc", |
| "renesas,rza1-irqc"; |
| #interrupt-cells = <2>; |
| #address-cells = <0>; |
| interrupt-controller; |
| reg = <0xfcfef800 0x6>; |
| interrupt-map = |
| <0 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, |
| <1 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, |
| <2 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, |
| <3 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, |
| <4 0 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, |
| <5 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, |
| <6 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, |
| <7 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-map-mask = <7 0>; |
| }; |
| |
| pinctrl: pin-controller@fcffe000 { |
| compatible = "renesas,r7s9210-pinctrl"; |
| reg = <0xfcffe000 0x1000>; |
| |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = <&pinctrl 0 0 176>; |
| }; |
| }; |
| }; |
