| /* |
| * rtc class driver for the Maxim MAX6900 chip |
| * |
| * Author: Dale Farnsworth <dale@farnsworth.org> |
| * |
| * based on previously existing rtc class drivers |
| * |
| * 2007 (c) MontaVista, Software, Inc. This file is licensed under |
| * the terms of the GNU General Public License version 2. This program |
| * is licensed "as is" without any warranty of any kind, whether express |
| * or implied. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/i2c.h> |
| #include <linux/bcd.h> |
| #include <linux/rtc.h> |
| #include <linux/delay.h> |
| |
| #define DRV_NAME "max6900" |
| #define DRV_VERSION "0.1" |
| |
| /* |
| * register indices |
| */ |
| #define MAX6900_REG_SC 0 /* seconds 00-59 */ |
| #define MAX6900_REG_MN 1 /* minutes 00-59 */ |
| #define MAX6900_REG_HR 2 /* hours 00-23 */ |
| #define MAX6900_REG_DT 3 /* day of month 00-31 */ |
| #define MAX6900_REG_MO 4 /* month 01-12 */ |
| #define MAX6900_REG_DW 5 /* day of week 1-7 */ |
| #define MAX6900_REG_YR 6 /* year 00-99 */ |
| #define MAX6900_REG_CT 7 /* control */ |
| /* register 8 is undocumented */ |
| #define MAX6900_REG_CENTURY 9 /* century */ |
| #define MAX6900_REG_LEN 10 |
| |
| #define MAX6900_BURST_LEN 8 /* can burst r/w first 8 regs */ |
| |
| #define MAX6900_REG_CT_WP (1 << 7) /* Write Protect */ |
| |
| |
| /* |
| * register read/write commands |
| */ |
| #define MAX6900_REG_CONTROL_WRITE 0x8e |
| #define MAX6900_REG_CENTURY_WRITE 0x92 |
| #define MAX6900_REG_CENTURY_READ 0x93 |
| #define MAX6900_REG_RESERVED_READ 0x96 |
| #define MAX6900_REG_BURST_WRITE 0xbe |
| #define MAX6900_REG_BURST_READ 0xbf |
| |
| #define MAX6900_IDLE_TIME_AFTER_WRITE 3 /* specification says 2.5 mS */ |
| |
| #define MAX6900_I2C_ADDR 0xa0 |
| |
| static const unsigned short normal_i2c[] = { |
| MAX6900_I2C_ADDR >> 1, |
| I2C_CLIENT_END |
| }; |
| |
| I2C_CLIENT_INSMOD; /* defines addr_data */ |
| |
| static int max6900_probe(struct i2c_adapter *adapter, int addr, int kind); |
| |
| static int max6900_i2c_read_regs(struct i2c_client *client, u8 *buf) |
| { |
| u8 reg_burst_read[1] = { MAX6900_REG_BURST_READ }; |
| u8 reg_century_read[1] = { MAX6900_REG_CENTURY_READ }; |
| struct i2c_msg msgs[4] = { |
| { |
| .addr = client->addr, |
| .flags = 0, /* write */ |
| .len = sizeof(reg_burst_read), |
| .buf = reg_burst_read |
| }, |
| { |
| .addr = client->addr, |
| .flags = I2C_M_RD, |
| .len = MAX6900_BURST_LEN, |
| .buf = buf |
| }, |
| { |
| .addr = client->addr, |
| .flags = 0, /* write */ |
| .len = sizeof(reg_century_read), |
| .buf = reg_century_read |
| }, |
| { |
| .addr = client->addr, |
| .flags = I2C_M_RD, |
| .len = sizeof(buf[MAX6900_REG_CENTURY]), |
| .buf = &buf[MAX6900_REG_CENTURY] |
| } |
| }; |
| int rc; |
| |
| rc = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); |
| if (rc != ARRAY_SIZE(msgs)) { |
| dev_err(&client->dev, "%s: register read failed\n", |
| __FUNCTION__); |
| return -EIO; |
| } |
| return 0; |
| } |
| |
| static int max6900_i2c_write_regs(struct i2c_client *client, u8 const *buf) |
| { |
| u8 i2c_century_buf[1 + 1] = { MAX6900_REG_CENTURY_WRITE }; |
| struct i2c_msg century_msgs[1] = { |
| { |
| .addr = client->addr, |
| .flags = 0, /* write */ |
| .len = sizeof(i2c_century_buf), |
| .buf = i2c_century_buf |
| } |
| }; |
| u8 i2c_burst_buf[MAX6900_BURST_LEN + 1] = { MAX6900_REG_BURST_WRITE }; |
| struct i2c_msg burst_msgs[1] = { |
| { |
| .addr = client->addr, |
| .flags = 0, /* write */ |
| .len = sizeof(i2c_burst_buf), |
| .buf = i2c_burst_buf |
| } |
| }; |
| int rc; |
| |
| /* |
| * We have to make separate calls to i2c_transfer because of |
| * the need to delay after each write to the chip. Also, |
| * we write the century byte first, since we set the write-protect |
| * bit as part of the burst write. |
| */ |
| i2c_century_buf[1] = buf[MAX6900_REG_CENTURY]; |
| rc = i2c_transfer(client->adapter, century_msgs, |
| ARRAY_SIZE(century_msgs)); |
| if (rc != ARRAY_SIZE(century_msgs)) |
| goto write_failed; |
| msleep(MAX6900_IDLE_TIME_AFTER_WRITE); |
| |
| memcpy(&i2c_burst_buf[1], buf, MAX6900_BURST_LEN); |
| |
| rc = i2c_transfer(client->adapter, burst_msgs, ARRAY_SIZE(burst_msgs)); |
| if (rc != ARRAY_SIZE(burst_msgs)) |
| goto write_failed; |
| msleep(MAX6900_IDLE_TIME_AFTER_WRITE); |
| |
| return 0; |
| |
| write_failed: |
| dev_err(&client->dev, "%s: register write failed\n", |
| __FUNCTION__); |
| return -EIO; |
| } |
| |
| static int max6900_i2c_validate_client(struct i2c_client *client) |
| { |
| u8 regs[MAX6900_REG_LEN]; |
| u8 zero_mask[] = { |
| 0x80, /* seconds */ |
| 0x80, /* minutes */ |
| 0x40, /* hours */ |
| 0xc0, /* day of month */ |
| 0xe0, /* month */ |
| 0xf8, /* day of week */ |
| 0x00, /* year */ |
| 0x7f, /* control */ |
| }; |
| int i; |
| int rc; |
| int reserved; |
| |
| reserved = i2c_smbus_read_byte_data(client, MAX6900_REG_RESERVED_READ); |
| if (reserved != 0x07) |
| return -ENODEV; |
| |
| rc = max6900_i2c_read_regs(client, regs); |
| if (rc < 0) |
| return rc; |
| |
| for (i = 0; i < ARRAY_SIZE(zero_mask); ++i) { |
| if (regs[i] & zero_mask[i]) |
| return -ENODEV; |
| } |
| |
| return 0; |
| } |
| |
| static int max6900_i2c_read_time(struct i2c_client *client, struct rtc_time *tm) |
| { |
| int rc; |
| u8 regs[MAX6900_REG_LEN]; |
| |
| rc = max6900_i2c_read_regs(client, regs); |
| if (rc < 0) |
| return rc; |
| |
| tm->tm_sec = BCD2BIN(regs[MAX6900_REG_SC]); |
| tm->tm_min = BCD2BIN(regs[MAX6900_REG_MN]); |
| tm->tm_hour = BCD2BIN(regs[MAX6900_REG_HR] & 0x3f); |
| tm->tm_mday = BCD2BIN(regs[MAX6900_REG_DT]); |
| tm->tm_mon = BCD2BIN(regs[MAX6900_REG_MO]) - 1; |
| tm->tm_year = BCD2BIN(regs[MAX6900_REG_YR]) + |
| BCD2BIN(regs[MAX6900_REG_CENTURY]) * 100 - 1900; |
| tm->tm_wday = BCD2BIN(regs[MAX6900_REG_DW]); |
| |
| return 0; |
| } |
| |
| static int max6900_i2c_clear_write_protect(struct i2c_client *client) |
| { |
| int rc; |
| rc = i2c_smbus_write_byte_data (client, MAX6900_REG_CONTROL_WRITE, 0); |
| if (rc < 0) { |
| dev_err(&client->dev, "%s: control register write failed\n", |
| __FUNCTION__); |
| return -EIO; |
| } |
| return 0; |
| } |
| |
| static int max6900_i2c_set_time(struct i2c_client *client, |
| struct rtc_time const *tm) |
| { |
| u8 regs[MAX6900_REG_LEN]; |
| int rc; |
| |
| rc = max6900_i2c_clear_write_protect(client); |
| if (rc < 0) |
| return rc; |
| |
| regs[MAX6900_REG_SC] = BIN2BCD(tm->tm_sec); |
| regs[MAX6900_REG_MN] = BIN2BCD(tm->tm_min); |
| regs[MAX6900_REG_HR] = BIN2BCD(tm->tm_hour); |
| regs[MAX6900_REG_DT] = BIN2BCD(tm->tm_mday); |
| regs[MAX6900_REG_MO] = BIN2BCD(tm->tm_mon + 1); |
| regs[MAX6900_REG_DW] = BIN2BCD(tm->tm_wday); |
| regs[MAX6900_REG_YR] = BIN2BCD(tm->tm_year % 100); |
| regs[MAX6900_REG_CENTURY] = BIN2BCD((tm->tm_year + 1900) / 100); |
| /* set write protect */ |
| regs[MAX6900_REG_CT] = MAX6900_REG_CT_WP; |
| |
| rc = max6900_i2c_write_regs(client, regs); |
| if (rc < 0) |
| return rc; |
| |
| return 0; |
| } |
| |
| static int max6900_rtc_read_time(struct device *dev, struct rtc_time *tm) |
| { |
| return max6900_i2c_read_time(to_i2c_client(dev), tm); |
| } |
| |
| static int max6900_rtc_set_time(struct device *dev, struct rtc_time *tm) |
| { |
| return max6900_i2c_set_time(to_i2c_client(dev), tm); |
| } |
| |
| static int max6900_attach_adapter(struct i2c_adapter *adapter) |
| { |
| return i2c_probe(adapter, &addr_data, max6900_probe); |
| } |
| |
| static int max6900_detach_client(struct i2c_client *client) |
| { |
| struct rtc_device *const rtc = i2c_get_clientdata(client); |
| |
| if (rtc) |
| rtc_device_unregister(rtc); |
| |
| return i2c_detach_client(client); |
| } |
| |
| static struct i2c_driver max6900_driver = { |
| .driver = { |
| .name = DRV_NAME, |
| }, |
| .id = I2C_DRIVERID_MAX6900, |
| .attach_adapter = max6900_attach_adapter, |
| .detach_client = max6900_detach_client, |
| }; |
| |
| static const struct rtc_class_ops max6900_rtc_ops = { |
| .read_time = max6900_rtc_read_time, |
| .set_time = max6900_rtc_set_time, |
| }; |
| |
| static int max6900_probe(struct i2c_adapter *adapter, int addr, int kind) |
| { |
| int rc = 0; |
| struct i2c_client *client = NULL; |
| struct rtc_device *rtc = NULL; |
| |
| if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) { |
| rc = -ENODEV; |
| goto failout; |
| } |
| |
| client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); |
| if (client == NULL) { |
| rc = -ENOMEM; |
| goto failout; |
| } |
| |
| client->addr = addr; |
| client->adapter = adapter; |
| client->driver = &max6900_driver; |
| strlcpy(client->name, DRV_NAME, I2C_NAME_SIZE); |
| |
| if (kind < 0) { |
| rc = max6900_i2c_validate_client(client); |
| if (rc < 0) |
| goto failout; |
| } |
| |
| rc = i2c_attach_client(client); |
| if (rc < 0) |
| goto failout; |
| |
| dev_info(&client->dev, |
| "chip found, driver version " DRV_VERSION "\n"); |
| |
| rtc = rtc_device_register(max6900_driver.driver.name, |
| &client->dev, |
| &max6900_rtc_ops, THIS_MODULE); |
| if (IS_ERR(rtc)) { |
| rc = PTR_ERR(rtc); |
| goto failout_detach; |
| } |
| |
| i2c_set_clientdata(client, rtc); |
| |
| return 0; |
| |
| failout_detach: |
| i2c_detach_client(client); |
| failout: |
| kfree(client); |
| return rc; |
| } |
| |
| static int __init max6900_init(void) |
| { |
| return i2c_add_driver(&max6900_driver); |
| } |
| |
| static void __exit max6900_exit(void) |
| { |
| i2c_del_driver(&max6900_driver); |
| } |
| |
| MODULE_DESCRIPTION("Maxim MAX6900 RTC driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_VERSION(DRV_VERSION); |
| |
| module_init(max6900_init); |
| module_exit(max6900_exit); |