| /* |
| * IXP4XX EHCI Host Controller Driver |
| * |
| * Author: Vladimir Barinov <vbarinov@ru.mvista.com> |
| * |
| * Based on "ehci-fsl.c" by Randy Vinson <rvinson@mvista.com> |
| * |
| * 2007 (c) MontaVista Software, Inc. This file is licensed under |
| * the terms of the GNU General Public License version 2. This program |
| * is licensed "as is" without any warranty of any kind, whether express |
| * or implied. |
| */ |
| |
| #include <linux/platform_device.h> |
| |
| static int ixp4xx_ehci_init(struct usb_hcd *hcd) |
| { |
| struct ehci_hcd *ehci = hcd_to_ehci(hcd); |
| int retval = 0; |
| |
| ehci->big_endian_desc = 1; |
| ehci->big_endian_mmio = 1; |
| |
| ehci->caps = hcd->regs + 0x100; |
| ehci->regs = hcd->regs + 0x100 |
| + HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase)); |
| ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); |
| |
| ehci->is_tdi_rh_tt = 1; |
| ehci_reset(ehci); |
| |
| retval = ehci_init(hcd); |
| if (retval) |
| return retval; |
| |
| ehci_port_power(ehci, 0); |
| |
| return retval; |
| } |
| |
| static const struct hc_driver ixp4xx_ehci_hc_driver = { |
| .description = hcd_name, |
| .product_desc = "IXP4XX EHCI Host Controller", |
| .hcd_priv_size = sizeof(struct ehci_hcd), |
| .irq = ehci_irq, |
| .flags = HCD_MEMORY | HCD_USB2, |
| .reset = ixp4xx_ehci_init, |
| .start = ehci_run, |
| .stop = ehci_stop, |
| .shutdown = ehci_shutdown, |
| .urb_enqueue = ehci_urb_enqueue, |
| .urb_dequeue = ehci_urb_dequeue, |
| .endpoint_disable = ehci_endpoint_disable, |
| .get_frame_number = ehci_get_frame, |
| .hub_status_data = ehci_hub_status_data, |
| .hub_control = ehci_hub_control, |
| #if defined(CONFIG_PM) |
| .bus_suspend = ehci_bus_suspend, |
| .bus_resume = ehci_bus_resume, |
| #endif |
| }; |
| |
| static int ixp4xx_ehci_probe(struct platform_device *pdev) |
| { |
| struct usb_hcd *hcd; |
| const struct hc_driver *driver = &ixp4xx_ehci_hc_driver; |
| struct resource *res; |
| int irq; |
| int retval; |
| |
| if (usb_disabled()) |
| return -ENODEV; |
| |
| res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); |
| if (!res) { |
| dev_err(&pdev->dev, |
| "Found HC with no IRQ. Check %s setup!\n", |
| pdev->dev.bus_id); |
| return -ENODEV; |
| } |
| irq = res->start; |
| |
| hcd = usb_create_hcd(driver, &pdev->dev, pdev->dev.bus_id); |
| if (!hcd) { |
| retval = -ENOMEM; |
| goto fail_create_hcd; |
| } |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!res) { |
| dev_err(&pdev->dev, |
| "Found HC with no register addr. Check %s setup!\n", |
| pdev->dev.bus_id); |
| retval = -ENODEV; |
| goto fail_request_resource; |
| } |
| hcd->rsrc_start = res->start; |
| hcd->rsrc_len = res->end - res->start + 1; |
| |
| if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, |
| driver->description)) { |
| dev_dbg(&pdev->dev, "controller already in use\n"); |
| retval = -EBUSY; |
| goto fail_request_resource; |
| } |
| |
| hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len); |
| if (hcd->regs == NULL) { |
| dev_dbg(&pdev->dev, "error mapping memory\n"); |
| retval = -EFAULT; |
| goto fail_ioremap; |
| } |
| |
| retval = usb_add_hcd(hcd, irq, IRQF_SHARED); |
| if (retval) |
| goto fail_add_hcd; |
| |
| return retval; |
| |
| fail_add_hcd: |
| iounmap(hcd->regs); |
| fail_ioremap: |
| release_mem_region(hcd->rsrc_start, hcd->rsrc_len); |
| fail_request_resource: |
| usb_put_hcd(hcd); |
| fail_create_hcd: |
| dev_err(&pdev->dev, "init %s fail, %d\n", pdev->dev.bus_id, retval); |
| return retval; |
| } |
| |
| static int ixp4xx_ehci_remove(struct platform_device *pdev) |
| { |
| struct usb_hcd *hcd = platform_get_drvdata(pdev); |
| |
| usb_remove_hcd(hcd); |
| iounmap(hcd->regs); |
| release_mem_region(hcd->rsrc_start, hcd->rsrc_len); |
| usb_put_hcd(hcd); |
| |
| return 0; |
| } |
| |
| MODULE_ALIAS("ixp4xx-ehci"); |
| |
| static struct platform_driver ixp4xx_ehci_driver = { |
| .probe = ixp4xx_ehci_probe, |
| .remove = ixp4xx_ehci_remove, |
| .driver = { |
| .name = "ixp4xx-ehci", |
| .bus = &platform_bus_type |
| }, |
| }; |