| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ |
| * Author: Rob Clark <rob@ti.com> |
| */ |
| |
| #include <drm/drm_crtc.h> |
| #include <drm/drm_util.h> |
| #include <drm/drm_fb_helper.h> |
| #include <drm/drm_file.h> |
| #include <drm/drm_fourcc.h> |
| |
| #include "omap_drv.h" |
| |
| MODULE_PARM_DESC(ywrap, "Enable ywrap scrolling (omap44xx and later, default 'y')"); |
| static bool ywrap_enabled = true; |
| module_param_named(ywrap, ywrap_enabled, bool, 0644); |
| |
| /* |
| * fbdev funcs, to implement legacy fbdev interface on top of drm driver |
| */ |
| |
| #define to_omap_fbdev(x) container_of(x, struct omap_fbdev, base) |
| |
| struct omap_fbdev { |
| struct drm_fb_helper base; |
| struct drm_framebuffer *fb; |
| struct drm_gem_object *bo; |
| bool ywrap_enabled; |
| |
| /* for deferred dmm roll when getting called in atomic ctx */ |
| struct work_struct work; |
| }; |
| |
| static struct drm_fb_helper *get_fb(struct fb_info *fbi); |
| |
| static void pan_worker(struct work_struct *work) |
| { |
| struct omap_fbdev *fbdev = container_of(work, struct omap_fbdev, work); |
| struct fb_info *fbi = fbdev->base.fbdev; |
| int npages; |
| |
| /* DMM roll shifts in 4K pages: */ |
| npages = fbi->fix.line_length >> PAGE_SHIFT; |
| omap_gem_roll(fbdev->bo, fbi->var.yoffset * npages); |
| } |
| |
| static int omap_fbdev_pan_display(struct fb_var_screeninfo *var, |
| struct fb_info *fbi) |
| { |
| struct drm_fb_helper *helper = get_fb(fbi); |
| struct omap_fbdev *fbdev = to_omap_fbdev(helper); |
| |
| if (!helper) |
| goto fallback; |
| |
| if (!fbdev->ywrap_enabled) |
| goto fallback; |
| |
| if (drm_can_sleep()) { |
| pan_worker(&fbdev->work); |
| } else { |
| struct omap_drm_private *priv = helper->dev->dev_private; |
| queue_work(priv->wq, &fbdev->work); |
| } |
| |
| return 0; |
| |
| fallback: |
| return drm_fb_helper_pan_display(var, fbi); |
| } |
| |
| static const struct fb_ops omap_fb_ops = { |
| .owner = THIS_MODULE, |
| |
| .fb_check_var = drm_fb_helper_check_var, |
| .fb_set_par = drm_fb_helper_set_par, |
| .fb_setcmap = drm_fb_helper_setcmap, |
| .fb_blank = drm_fb_helper_blank, |
| .fb_pan_display = omap_fbdev_pan_display, |
| .fb_ioctl = drm_fb_helper_ioctl, |
| |
| .fb_read = drm_fb_helper_sys_read, |
| .fb_write = drm_fb_helper_sys_write, |
| .fb_fillrect = drm_fb_helper_sys_fillrect, |
| .fb_copyarea = drm_fb_helper_sys_copyarea, |
| .fb_imageblit = drm_fb_helper_sys_imageblit, |
| }; |
| |
| static int omap_fbdev_create(struct drm_fb_helper *helper, |
| struct drm_fb_helper_surface_size *sizes) |
| { |
| struct omap_fbdev *fbdev = to_omap_fbdev(helper); |
| struct drm_device *dev = helper->dev; |
| struct omap_drm_private *priv = dev->dev_private; |
| struct drm_framebuffer *fb = NULL; |
| union omap_gem_size gsize; |
| struct fb_info *fbi = NULL; |
| struct drm_mode_fb_cmd2 mode_cmd = {0}; |
| dma_addr_t dma_addr; |
| int ret; |
| |
| sizes->surface_bpp = 32; |
| sizes->surface_depth = 24; |
| |
| DBG("create fbdev: %dx%d@%d (%dx%d)", sizes->surface_width, |
| sizes->surface_height, sizes->surface_bpp, |
| sizes->fb_width, sizes->fb_height); |
| |
| mode_cmd.pixel_format = drm_mode_legacy_fb_format(sizes->surface_bpp, |
| sizes->surface_depth); |
| |
| mode_cmd.width = sizes->surface_width; |
| mode_cmd.height = sizes->surface_height; |
| |
| mode_cmd.pitches[0] = |
| DIV_ROUND_UP(mode_cmd.width * sizes->surface_bpp, 8); |
| |
| fbdev->ywrap_enabled = priv->has_dmm && ywrap_enabled; |
| if (fbdev->ywrap_enabled) { |
| /* need to align pitch to page size if using DMM scrolling */ |
| mode_cmd.pitches[0] = PAGE_ALIGN(mode_cmd.pitches[0]); |
| } |
| |
| /* allocate backing bo */ |
| gsize = (union omap_gem_size){ |
| .bytes = PAGE_ALIGN(mode_cmd.pitches[0] * mode_cmd.height), |
| }; |
| DBG("allocating %d bytes for fb %d", gsize.bytes, dev->primary->index); |
| fbdev->bo = omap_gem_new(dev, gsize, OMAP_BO_SCANOUT | OMAP_BO_WC); |
| if (!fbdev->bo) { |
| dev_err(dev->dev, "failed to allocate buffer object\n"); |
| ret = -ENOMEM; |
| goto fail; |
| } |
| |
| fb = omap_framebuffer_init(dev, &mode_cmd, &fbdev->bo); |
| if (IS_ERR(fb)) { |
| dev_err(dev->dev, "failed to allocate fb\n"); |
| /* note: if fb creation failed, we can't rely on fb destroy |
| * to unref the bo: |
| */ |
| drm_gem_object_put_unlocked(fbdev->bo); |
| ret = PTR_ERR(fb); |
| goto fail; |
| } |
| |
| /* note: this keeps the bo pinned.. which is perhaps not ideal, |
| * but is needed as long as we use fb_mmap() to mmap to userspace |
| * (since this happens using fix.smem_start). Possibly we could |
| * implement our own mmap using GEM mmap support to avoid this |
| * (non-tiled buffer doesn't need to be pinned for fbcon to write |
| * to it). Then we just need to be sure that we are able to re- |
| * pin it in case of an opps. |
| */ |
| ret = omap_gem_pin(fbdev->bo, &dma_addr); |
| if (ret) { |
| dev_err(dev->dev, "could not pin framebuffer\n"); |
| ret = -ENOMEM; |
| goto fail; |
| } |
| |
| fbi = drm_fb_helper_alloc_fbi(helper); |
| if (IS_ERR(fbi)) { |
| dev_err(dev->dev, "failed to allocate fb info\n"); |
| ret = PTR_ERR(fbi); |
| goto fail; |
| } |
| |
| DBG("fbi=%p, dev=%p", fbi, dev); |
| |
| fbdev->fb = fb; |
| helper->fb = fb; |
| |
| fbi->fbops = &omap_fb_ops; |
| |
| drm_fb_helper_fill_info(fbi, helper, sizes); |
| |
| dev->mode_config.fb_base = dma_addr; |
| |
| fbi->screen_buffer = omap_gem_vaddr(fbdev->bo); |
| fbi->screen_size = fbdev->bo->size; |
| fbi->fix.smem_start = dma_addr; |
| fbi->fix.smem_len = fbdev->bo->size; |
| |
| /* if we have DMM, then we can use it for scrolling by just |
| * shuffling pages around in DMM rather than doing sw blit. |
| */ |
| if (fbdev->ywrap_enabled) { |
| DRM_INFO("Enabling DMM ywrap scrolling\n"); |
| fbi->flags |= FBINFO_HWACCEL_YWRAP | FBINFO_READS_FAST; |
| fbi->fix.ywrapstep = 1; |
| } |
| |
| |
| DBG("par=%p, %dx%d", fbi->par, fbi->var.xres, fbi->var.yres); |
| DBG("allocated %dx%d fb", fbdev->fb->width, fbdev->fb->height); |
| |
| return 0; |
| |
| fail: |
| |
| if (ret) { |
| if (fb) |
| drm_framebuffer_remove(fb); |
| } |
| |
| return ret; |
| } |
| |
| static const struct drm_fb_helper_funcs omap_fb_helper_funcs = { |
| .fb_probe = omap_fbdev_create, |
| }; |
| |
| static struct drm_fb_helper *get_fb(struct fb_info *fbi) |
| { |
| if (!fbi || strcmp(fbi->fix.id, MODULE_NAME)) { |
| /* these are not the fb's you're looking for */ |
| return NULL; |
| } |
| return fbi->par; |
| } |
| |
| /* initialize fbdev helper */ |
| void omap_fbdev_init(struct drm_device *dev) |
| { |
| struct omap_drm_private *priv = dev->dev_private; |
| struct omap_fbdev *fbdev = NULL; |
| struct drm_fb_helper *helper; |
| int ret = 0; |
| |
| if (!priv->num_pipes) |
| return; |
| |
| fbdev = kzalloc(sizeof(*fbdev), GFP_KERNEL); |
| if (!fbdev) |
| goto fail; |
| |
| INIT_WORK(&fbdev->work, pan_worker); |
| |
| helper = &fbdev->base; |
| |
| drm_fb_helper_prepare(dev, helper, &omap_fb_helper_funcs); |
| |
| ret = drm_fb_helper_init(dev, helper, priv->num_pipes); |
| if (ret) |
| goto fail; |
| |
| ret = drm_fb_helper_single_add_all_connectors(helper); |
| if (ret) |
| goto fini; |
| |
| ret = drm_fb_helper_initial_config(helper, 32); |
| if (ret) |
| goto fini; |
| |
| priv->fbdev = helper; |
| |
| return; |
| |
| fini: |
| drm_fb_helper_fini(helper); |
| fail: |
| kfree(fbdev); |
| |
| dev_warn(dev->dev, "omap_fbdev_init failed\n"); |
| } |
| |
| void omap_fbdev_fini(struct drm_device *dev) |
| { |
| struct omap_drm_private *priv = dev->dev_private; |
| struct drm_fb_helper *helper = priv->fbdev; |
| struct omap_fbdev *fbdev; |
| |
| DBG(); |
| |
| if (!helper) |
| return; |
| |
| drm_fb_helper_unregister_fbi(helper); |
| |
| drm_fb_helper_fini(helper); |
| |
| fbdev = to_omap_fbdev(helper); |
| |
| /* unpin the GEM object pinned in omap_fbdev_create() */ |
| if (fbdev->bo) |
| omap_gem_unpin(fbdev->bo); |
| |
| /* this will free the backing object */ |
| if (fbdev->fb) |
| drm_framebuffer_remove(fbdev->fb); |
| |
| kfree(fbdev); |
| |
| priv->fbdev = NULL; |
| } |