| /* |
| * Functions related to generic timeout handling of requests. |
| */ |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/blkdev.h> |
| #include <linux/fault-inject.h> |
| |
| #include "blk.h" |
| |
| #ifdef CONFIG_FAIL_IO_TIMEOUT |
| |
| static DECLARE_FAULT_ATTR(fail_io_timeout); |
| |
| static int __init setup_fail_io_timeout(char *str) |
| { |
| return setup_fault_attr(&fail_io_timeout, str); |
| } |
| __setup("fail_io_timeout=", setup_fail_io_timeout); |
| |
| int blk_should_fake_timeout(struct request_queue *q) |
| { |
| if (!test_bit(QUEUE_FLAG_FAIL_IO, &q->queue_flags)) |
| return 0; |
| |
| return should_fail(&fail_io_timeout, 1); |
| } |
| |
| static int __init fail_io_timeout_debugfs(void) |
| { |
| struct dentry *dir = fault_create_debugfs_attr("fail_io_timeout", |
| NULL, &fail_io_timeout); |
| |
| return IS_ERR(dir) ? PTR_ERR(dir) : 0; |
| } |
| |
| late_initcall(fail_io_timeout_debugfs); |
| |
| ssize_t part_timeout_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct gendisk *disk = dev_to_disk(dev); |
| int set = test_bit(QUEUE_FLAG_FAIL_IO, &disk->queue->queue_flags); |
| |
| return sprintf(buf, "%d\n", set != 0); |
| } |
| |
| ssize_t part_timeout_store(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct gendisk *disk = dev_to_disk(dev); |
| int val; |
| |
| if (count) { |
| struct request_queue *q = disk->queue; |
| char *p = (char *) buf; |
| |
| val = simple_strtoul(p, &p, 10); |
| spin_lock_irq(q->queue_lock); |
| if (val) |
| queue_flag_set(QUEUE_FLAG_FAIL_IO, q); |
| else |
| queue_flag_clear(QUEUE_FLAG_FAIL_IO, q); |
| spin_unlock_irq(q->queue_lock); |
| } |
| |
| return count; |
| } |
| |
| #endif /* CONFIG_FAIL_IO_TIMEOUT */ |
| |
| /* |
| * blk_delete_timer - Delete/cancel timer for a given function. |
| * @req: request that we are canceling timer for |
| * |
| */ |
| void blk_delete_timer(struct request *req) |
| { |
| list_del_init(&req->timeout_list); |
| } |
| |
| static void blk_rq_timed_out(struct request *req) |
| { |
| struct request_queue *q = req->q; |
| enum blk_eh_timer_return ret = BLK_EH_RESET_TIMER; |
| |
| if (q->rq_timed_out_fn) |
| ret = q->rq_timed_out_fn(req); |
| switch (ret) { |
| case BLK_EH_HANDLED: |
| __blk_complete_request(req); |
| break; |
| case BLK_EH_RESET_TIMER: |
| blk_add_timer(req); |
| blk_clear_rq_complete(req); |
| break; |
| case BLK_EH_NOT_HANDLED: |
| /* |
| * LLD handles this for now but in the future |
| * we can send a request msg to abort the command |
| * and we can move more of the generic scsi eh code to |
| * the blk layer. |
| */ |
| break; |
| default: |
| printk(KERN_ERR "block: bad eh return: %d\n", ret); |
| break; |
| } |
| } |
| |
| void blk_rq_timed_out_timer(unsigned long data) |
| { |
| struct request_queue *q = (struct request_queue *) data; |
| unsigned long flags, next = 0; |
| struct request *rq, *tmp; |
| int next_set = 0; |
| |
| spin_lock_irqsave(q->queue_lock, flags); |
| |
| list_for_each_entry_safe(rq, tmp, &q->timeout_list, timeout_list) { |
| if (time_after_eq(jiffies, rq->deadline)) { |
| list_del_init(&rq->timeout_list); |
| |
| /* |
| * Check if we raced with end io completion |
| */ |
| if (blk_mark_rq_complete(rq)) |
| continue; |
| blk_rq_timed_out(rq); |
| } else if (!next_set || time_after(next, rq->deadline)) { |
| next = rq->deadline; |
| next_set = 1; |
| } |
| } |
| |
| if (next_set) |
| mod_timer(&q->timeout, round_jiffies_up(next)); |
| |
| spin_unlock_irqrestore(q->queue_lock, flags); |
| } |
| |
| /** |
| * blk_abort_request -- Request request recovery for the specified command |
| * @req: pointer to the request of interest |
| * |
| * This function requests that the block layer start recovery for the |
| * request by deleting the timer and calling the q's timeout function. |
| * LLDDs who implement their own error recovery MAY ignore the timeout |
| * event if they generated blk_abort_req. Must hold queue lock. |
| */ |
| void blk_abort_request(struct request *req) |
| { |
| if (blk_mark_rq_complete(req)) |
| return; |
| blk_delete_timer(req); |
| blk_rq_timed_out(req); |
| } |
| EXPORT_SYMBOL_GPL(blk_abort_request); |
| |
| /** |
| * blk_add_timer - Start timeout timer for a single request |
| * @req: request that is about to start running. |
| * |
| * Notes: |
| * Each request has its own timer, and as it is added to the queue, we |
| * set up the timer. When the request completes, we cancel the timer. |
| */ |
| void blk_add_timer(struct request *req) |
| { |
| struct request_queue *q = req->q; |
| unsigned long expiry; |
| |
| if (!q->rq_timed_out_fn) |
| return; |
| |
| BUG_ON(!list_empty(&req->timeout_list)); |
| |
| /* |
| * Some LLDs, like scsi, peek at the timeout to prevent a |
| * command from being retried forever. |
| */ |
| if (!req->timeout) |
| req->timeout = q->rq_timeout; |
| |
| req->deadline = jiffies + req->timeout; |
| list_add_tail(&req->timeout_list, &q->timeout_list); |
| |
| /* |
| * If the timer isn't already pending or this timeout is earlier |
| * than an existing one, modify the timer. Round up to next nearest |
| * second. |
| */ |
| expiry = round_jiffies_up(req->deadline); |
| |
| if (!timer_pending(&q->timeout) || |
| time_before(expiry, q->timeout.expires)) |
| mod_timer(&q->timeout, expiry); |
| } |
| |