| /* |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * SGI UV Broadcast Assist Unit definitions |
| * |
| * Copyright (C) 2008 Silicon Graphics, Inc. All rights reserved. |
| */ |
| |
| #ifndef _ASM_X86_UV_UV_BAU_H |
| #define _ASM_X86_UV_UV_BAU_H |
| |
| #include <linux/bitmap.h> |
| #define BITSPERBYTE 8 |
| |
| /* |
| * Broadcast Assist Unit messaging structures |
| * |
| * Selective Broadcast activations are induced by software action |
| * specifying a particular 8-descriptor "set" via a 6-bit index written |
| * to an MMR. |
| * Thus there are 64 unique 512-byte sets of SB descriptors - one set for |
| * each 6-bit index value. These descriptor sets are mapped in sequence |
| * starting with set 0 located at the address specified in the |
| * BAU_SB_DESCRIPTOR_BASE register, set 1 is located at BASE + 512, |
| * set 2 is at BASE + 2*512, set 3 at BASE + 3*512, and so on. |
| * |
| * We will use 31 sets, one for sending BAU messages from each of the 32 |
| * cpu's on the node. |
| * |
| * TLB shootdown will use the first of the 8 descriptors of each set. |
| * Each of the descriptors is 64 bytes in size (8*64 = 512 bytes in a set). |
| */ |
| |
| #define UV_ITEMS_PER_DESCRIPTOR 8 |
| #define UV_CPUS_PER_ACT_STATUS 32 |
| #define UV_ACT_STATUS_MASK 0x3 |
| #define UV_ACT_STATUS_SIZE 2 |
| #define UV_ACTIVATION_DESCRIPTOR_SIZE 32 |
| #define UV_DISTRIBUTION_SIZE 256 |
| #define UV_SW_ACK_NPENDING 8 |
| #define UV_NET_ENDPOINT_INTD 0x38 |
| #define UV_DESC_BASE_PNODE_SHIFT 49 |
| #define UV_PAYLOADQ_PNODE_SHIFT 49 |
| #define UV_PTC_BASENAME "sgi_uv/ptc_statistics" |
| #define uv_physnodeaddr(x) ((__pa((unsigned long)(x)) & uv_mmask)) |
| |
| /* |
| * bits in UVH_LB_BAU_SB_ACTIVATION_STATUS_0/1 |
| */ |
| #define DESC_STATUS_IDLE 0 |
| #define DESC_STATUS_ACTIVE 1 |
| #define DESC_STATUS_DESTINATION_TIMEOUT 2 |
| #define DESC_STATUS_SOURCE_TIMEOUT 3 |
| |
| /* |
| * source side threshholds at which message retries print a warning |
| */ |
| #define SOURCE_TIMEOUT_LIMIT 20 |
| #define DESTINATION_TIMEOUT_LIMIT 20 |
| |
| /* |
| * number of entries in the destination side payload queue |
| */ |
| #define DEST_Q_SIZE 17 |
| /* |
| * number of destination side software ack resources |
| */ |
| #define DEST_NUM_RESOURCES 8 |
| #define MAX_CPUS_PER_NODE 32 |
| /* |
| * completion statuses for sending a TLB flush message |
| */ |
| #define FLUSH_RETRY 1 |
| #define FLUSH_GIVEUP 2 |
| #define FLUSH_COMPLETE 3 |
| |
| /* |
| * Distribution: 32 bytes (256 bits) (bytes 0-0x1f of descriptor) |
| * If the 'multilevel' flag in the header portion of the descriptor |
| * has been set to 0, then endpoint multi-unicast mode is selected. |
| * The distribution specification (32 bytes) is interpreted as a 256-bit |
| * distribution vector. Adjacent bits correspond to consecutive even numbered |
| * nodeIDs. The result of adding the index of a given bit to the 15-bit |
| * 'base_dest_nodeid' field of the header corresponds to the |
| * destination nodeID associated with that specified bit. |
| */ |
| struct bau_target_nodemask { |
| unsigned long bits[BITS_TO_LONGS(256)]; |
| }; |
| |
| /* |
| * mask of cpu's on a node |
| * (during initialization we need to check that unsigned long has |
| * enough bits for max. cpu's per node) |
| */ |
| struct bau_local_cpumask { |
| unsigned long bits; |
| }; |
| |
| /* |
| * Payload: 16 bytes (128 bits) (bytes 0x20-0x2f of descriptor) |
| * only 12 bytes (96 bits) of the payload area are usable. |
| * An additional 3 bytes (bits 27:4) of the header address are carried |
| * to the next bytes of the destination payload queue. |
| * And an additional 2 bytes of the header Suppl_A field are also |
| * carried to the destination payload queue. |
| * But the first byte of the Suppl_A becomes bits 127:120 (the 16th byte) |
| * of the destination payload queue, which is written by the hardware |
| * with the s/w ack resource bit vector. |
| * [ effective message contents (16 bytes (128 bits) maximum), not counting |
| * the s/w ack bit vector ] |
| */ |
| |
| /* |
| * The payload is software-defined for INTD transactions |
| */ |
| struct bau_msg_payload { |
| unsigned long address; /* signifies a page or all TLB's |
| of the cpu */ |
| /* 64 bits */ |
| unsigned short sending_cpu; /* filled in by sender */ |
| /* 16 bits */ |
| unsigned short acknowledge_count;/* filled in by destination */ |
| /* 16 bits */ |
| unsigned int reserved1:32; /* not usable */ |
| }; |
| |
| |
| /* |
| * Message header: 16 bytes (128 bits) (bytes 0x30-0x3f of descriptor) |
| * see table 4.2.3.0.1 in broacast_assist spec. |
| */ |
| struct bau_msg_header { |
| unsigned int dest_subnodeid:6; /* must be zero */ |
| /* bits 5:0 */ |
| unsigned int base_dest_nodeid:15; /* nasid>>1 (pnode) of */ |
| /* bits 20:6 */ /* first bit in node_map */ |
| unsigned int command:8; /* message type */ |
| /* bits 28:21 */ |
| /* 0x38: SN3net EndPoint Message */ |
| unsigned int rsvd_1:3; /* must be zero */ |
| /* bits 31:29 */ |
| /* int will align on 32 bits */ |
| unsigned int rsvd_2:9; /* must be zero */ |
| /* bits 40:32 */ |
| /* Suppl_A is 56-41 */ |
| unsigned int payload_2a:8;/* becomes byte 16 of msg */ |
| /* bits 48:41 */ /* not currently using */ |
| unsigned int payload_2b:8;/* becomes byte 17 of msg */ |
| /* bits 56:49 */ /* not currently using */ |
| /* Address field (96:57) is never used as an |
| address (these are address bits 42:3) */ |
| unsigned int rsvd_3:1; /* must be zero */ |
| /* bit 57 */ |
| /* address bits 27:4 are payload */ |
| /* these 24 bits become bytes 12-14 of msg */ |
| unsigned int replied_to:1;/* sent as 0 by the source to byte 12 */ |
| /* bit 58 */ |
| |
| unsigned int payload_1a:5;/* not currently used */ |
| /* bits 63:59 */ |
| unsigned int payload_1b:8;/* not currently used */ |
| /* bits 71:64 */ |
| unsigned int payload_1c:8;/* not currently used */ |
| /* bits 79:72 */ |
| unsigned int payload_1d:2;/* not currently used */ |
| /* bits 81:80 */ |
| |
| unsigned int rsvd_4:7; /* must be zero */ |
| /* bits 88:82 */ |
| unsigned int sw_ack_flag:1;/* software acknowledge flag */ |
| /* bit 89 */ |
| /* INTD trasactions at destination are to |
| wait for software acknowledge */ |
| unsigned int rsvd_5:6; /* must be zero */ |
| /* bits 95:90 */ |
| unsigned int rsvd_6:5; /* must be zero */ |
| /* bits 100:96 */ |
| unsigned int int_both:1;/* if 1, interrupt both sockets on the blade */ |
| /* bit 101*/ |
| unsigned int fairness:3;/* usually zero */ |
| /* bits 104:102 */ |
| unsigned int multilevel:1; /* multi-level multicast format */ |
| /* bit 105 */ |
| /* 0 for TLB: endpoint multi-unicast messages */ |
| unsigned int chaining:1;/* next descriptor is part of this activation*/ |
| /* bit 106 */ |
| unsigned int rsvd_7:21; /* must be zero */ |
| /* bits 127:107 */ |
| }; |
| |
| /* |
| * The activation descriptor: |
| * The format of the message to send, plus all accompanying control |
| * Should be 64 bytes |
| */ |
| struct bau_desc { |
| struct bau_target_nodemask distribution; |
| /* |
| * message template, consisting of header and payload: |
| */ |
| struct bau_msg_header header; |
| struct bau_msg_payload payload; |
| }; |
| /* |
| * -payload-- ---------header------ |
| * bytes 0-11 bits 41-56 bits 58-81 |
| * A B (2) C (3) |
| * |
| * A/B/C are moved to: |
| * A C B |
| * bytes 0-11 bytes 12-14 bytes 16-17 (byte 15 filled in by hw as vector) |
| * ------------payload queue----------- |
| */ |
| |
| /* |
| * The payload queue on the destination side is an array of these. |
| * With BAU_MISC_CONTROL set for software acknowledge mode, the messages |
| * are 32 bytes (2 micropackets) (256 bits) in length, but contain only 17 |
| * bytes of usable data, including the sw ack vector in byte 15 (bits 127:120) |
| * (12 bytes come from bau_msg_payload, 3 from payload_1, 2 from |
| * sw_ack_vector and payload_2) |
| * "Enabling Software Acknowledgment mode (see Section 4.3.3 Software |
| * Acknowledge Processing) also selects 32 byte (17 bytes usable) payload |
| * operation." |
| */ |
| struct bau_payload_queue_entry { |
| unsigned long address; /* signifies a page or all TLB's |
| of the cpu */ |
| /* 64 bits, bytes 0-7 */ |
| |
| unsigned short sending_cpu; /* cpu that sent the message */ |
| /* 16 bits, bytes 8-9 */ |
| |
| unsigned short acknowledge_count; /* filled in by destination */ |
| /* 16 bits, bytes 10-11 */ |
| |
| unsigned short replied_to:1; /* sent as 0 by the source */ |
| /* 1 bit */ |
| unsigned short unused1:7; /* not currently using */ |
| /* 7 bits: byte 12) */ |
| |
| unsigned char unused2[2]; /* not currently using */ |
| /* bytes 13-14 */ |
| |
| unsigned char sw_ack_vector; /* filled in by the hardware */ |
| /* byte 15 (bits 127:120) */ |
| |
| unsigned char unused4[3]; /* not currently using bytes 17-19 */ |
| /* bytes 17-19 */ |
| |
| int number_of_cpus; /* filled in at destination */ |
| /* 32 bits, bytes 20-23 (aligned) */ |
| |
| unsigned char unused5[8]; /* not using */ |
| /* bytes 24-31 */ |
| }; |
| |
| /* |
| * one for every slot in the destination payload queue |
| */ |
| struct bau_msg_status { |
| struct bau_local_cpumask seen_by; /* map of cpu's */ |
| }; |
| |
| /* |
| * one for every slot in the destination software ack resources |
| */ |
| struct bau_sw_ack_status { |
| struct bau_payload_queue_entry *msg; /* associated message */ |
| int watcher; /* cpu monitoring, or -1 */ |
| }; |
| |
| /* |
| * one on every node and per-cpu; to locate the software tables |
| */ |
| struct bau_control { |
| struct bau_desc *descriptor_base; |
| struct bau_payload_queue_entry *bau_msg_head; |
| struct bau_payload_queue_entry *va_queue_first; |
| struct bau_payload_queue_entry *va_queue_last; |
| struct bau_msg_status *msg_statuses; |
| int *watching; /* pointer to array */ |
| }; |
| |
| /* |
| * This structure is allocated per_cpu for UV TLB shootdown statistics. |
| */ |
| struct ptc_stats { |
| unsigned long ptc_i; /* number of IPI-style flushes */ |
| unsigned long requestor; /* number of nodes this cpu sent to */ |
| unsigned long requestee; /* times cpu was remotely requested */ |
| unsigned long alltlb; /* times all tlb's on this cpu were flushed */ |
| unsigned long onetlb; /* times just one tlb on this cpu was flushed */ |
| unsigned long s_retry; /* retries on source side timeouts */ |
| unsigned long d_retry; /* retries on destination side timeouts */ |
| unsigned long sflush; /* cycles spent in uv_flush_tlb_others */ |
| unsigned long dflush; /* cycles spent on destination side */ |
| unsigned long retriesok; /* successes on retries */ |
| unsigned long nomsg; /* interrupts with no message */ |
| unsigned long multmsg; /* interrupts with multiple messages */ |
| unsigned long ntargeted;/* nodes targeted */ |
| }; |
| |
| static inline int bau_node_isset(int node, struct bau_target_nodemask *dstp) |
| { |
| return constant_test_bit(node, &dstp->bits[0]); |
| } |
| static inline void bau_node_set(int node, struct bau_target_nodemask *dstp) |
| { |
| __set_bit(node, &dstp->bits[0]); |
| } |
| static inline void bau_nodes_clear(struct bau_target_nodemask *dstp, int nbits) |
| { |
| bitmap_zero(&dstp->bits[0], nbits); |
| } |
| |
| static inline void bau_cpubits_clear(struct bau_local_cpumask *dstp, int nbits) |
| { |
| bitmap_zero(&dstp->bits, nbits); |
| } |
| |
| #define cpubit_isset(cpu, bau_local_cpumask) \ |
| test_bit((cpu), (bau_local_cpumask).bits) |
| |
| extern void uv_bau_message_intr1(void); |
| extern void uv_bau_timeout_intr1(void); |
| |
| #endif /* _ASM_X86_UV_UV_BAU_H */ |