| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Acer Iconia Tab A500 Embedded Controller Driver |
| * |
| * Copyright 2020 GRATE-driver project |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/i2c.h> |
| #include <linux/mfd/core.h> |
| #include <linux/module.h> |
| #include <linux/of_device.h> |
| #include <linux/reboot.h> |
| #include <linux/regmap.h> |
| |
| #define A500_EC_I2C_ERR_TIMEOUT 500 |
| #define A500_EC_POWER_CMD_TIMEOUT 1000 |
| |
| /* |
| * Controller's firmware expects specific command opcodes to be used for the |
| * corresponding registers. Unsupported commands are skipped by the firmware. |
| */ |
| #define CMD_SHUTDOWN 0x0 |
| #define CMD_WARM_REBOOT 0x0 |
| #define CMD_COLD_REBOOT 0x1 |
| |
| enum { |
| REG_CURRENT_NOW = 0x03, |
| REG_SHUTDOWN = 0x52, |
| REG_WARM_REBOOT = 0x54, |
| REG_COLD_REBOOT = 0x55, |
| }; |
| |
| static struct i2c_client *a500_ec_client_pm_off; |
| |
| static int a500_ec_read(void *context, const void *reg_buf, size_t reg_size, |
| void *val_buf, size_t val_sizel) |
| { |
| struct i2c_client *client = context; |
| unsigned int reg, retries = 5; |
| u16 *ret_val = val_buf; |
| s32 ret = 0; |
| |
| reg = *(u8 *)reg_buf; |
| |
| while (retries-- > 0) { |
| ret = i2c_smbus_read_word_data(client, reg); |
| if (ret >= 0) |
| break; |
| |
| msleep(A500_EC_I2C_ERR_TIMEOUT); |
| } |
| |
| if (ret < 0) { |
| dev_err(&client->dev, "read 0x%x failed: %d\n", reg, ret); |
| return ret; |
| } |
| |
| *ret_val = ret; |
| |
| if (reg == REG_CURRENT_NOW) |
| fsleep(10000); |
| |
| return 0; |
| } |
| |
| static int a500_ec_write(void *context, const void *data, size_t count) |
| { |
| struct i2c_client *client = context; |
| unsigned int reg, val, retries = 5; |
| s32 ret = 0; |
| |
| reg = *(u8 *)(data + 0); |
| val = *(u16 *)(data + 1); |
| |
| while (retries-- > 0) { |
| ret = i2c_smbus_write_word_data(client, reg, val); |
| if (ret >= 0) |
| break; |
| |
| msleep(A500_EC_I2C_ERR_TIMEOUT); |
| } |
| |
| if (ret < 0) { |
| dev_err(&client->dev, "write 0x%x failed: %d\n", reg, ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static const struct regmap_config a500_ec_regmap_config = { |
| .name = "KB930", |
| .reg_bits = 8, |
| .val_bits = 16, |
| .max_register = 0xff, |
| }; |
| |
| static const struct regmap_bus a500_ec_regmap_bus = { |
| .reg_format_endian_default = REGMAP_ENDIAN_NATIVE, |
| .val_format_endian_default = REGMAP_ENDIAN_LITTLE, |
| .write = a500_ec_write, |
| .read = a500_ec_read, |
| .max_raw_read = 2, |
| }; |
| |
| static void a500_ec_poweroff(void) |
| { |
| i2c_smbus_write_word_data(a500_ec_client_pm_off, |
| REG_SHUTDOWN, CMD_SHUTDOWN); |
| |
| mdelay(A500_EC_POWER_CMD_TIMEOUT); |
| } |
| |
| static int a500_ec_restart_notify(struct notifier_block *this, |
| unsigned long reboot_mode, void *data) |
| { |
| if (reboot_mode == REBOOT_WARM) |
| i2c_smbus_write_word_data(a500_ec_client_pm_off, |
| REG_WARM_REBOOT, CMD_WARM_REBOOT); |
| else |
| i2c_smbus_write_word_data(a500_ec_client_pm_off, |
| REG_COLD_REBOOT, CMD_COLD_REBOOT); |
| |
| mdelay(A500_EC_POWER_CMD_TIMEOUT); |
| |
| return NOTIFY_DONE; |
| } |
| |
| static struct notifier_block a500_ec_restart_handler = { |
| .notifier_call = a500_ec_restart_notify, |
| .priority = 200, |
| }; |
| |
| static const struct mfd_cell a500_ec_cells[] = { |
| { .name = "acer-a500-iconia-battery", }, |
| { .name = "acer-a500-iconia-leds", }, |
| }; |
| |
| static int a500_ec_probe(struct i2c_client *client) |
| { |
| struct regmap *regmap; |
| int err; |
| |
| regmap = devm_regmap_init(&client->dev, &a500_ec_regmap_bus, |
| client, &a500_ec_regmap_config); |
| if (IS_ERR(regmap)) |
| return PTR_ERR(regmap); |
| |
| err = devm_mfd_add_devices(&client->dev, PLATFORM_DEVID_AUTO, |
| a500_ec_cells, ARRAY_SIZE(a500_ec_cells), |
| NULL, 0, NULL); |
| if (err) { |
| dev_err(&client->dev, "failed to add sub-devices: %d\n", err); |
| return err; |
| } |
| |
| if (of_device_is_system_power_controller(client->dev.of_node)) { |
| a500_ec_client_pm_off = client; |
| |
| err = register_restart_handler(&a500_ec_restart_handler); |
| if (err) |
| return err; |
| |
| if (!pm_power_off) |
| pm_power_off = a500_ec_poweroff; |
| } |
| |
| return 0; |
| } |
| |
| static void a500_ec_remove(struct i2c_client *client) |
| { |
| if (of_device_is_system_power_controller(client->dev.of_node)) { |
| if (pm_power_off == a500_ec_poweroff) |
| pm_power_off = NULL; |
| |
| unregister_restart_handler(&a500_ec_restart_handler); |
| } |
| } |
| |
| static const struct of_device_id a500_ec_match[] = { |
| { .compatible = "acer,a500-iconia-ec" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, a500_ec_match); |
| |
| static struct i2c_driver a500_ec_driver = { |
| .driver = { |
| .name = "acer-a500-embedded-controller", |
| .of_match_table = a500_ec_match, |
| }, |
| .probe = a500_ec_probe, |
| .remove = a500_ec_remove, |
| }; |
| module_i2c_driver(a500_ec_driver); |
| |
| MODULE_DESCRIPTION("Acer Iconia Tab A500 Embedded Controller driver"); |
| MODULE_AUTHOR("Dmitry Osipenko <digetx@gmail.com>"); |
| MODULE_LICENSE("GPL"); |