| // SPDX-License-Identifier: GPL-2.0-only |
| // |
| // rt712-sdca-sdw.c -- rt712 SDCA ALSA SoC audio driver |
| // |
| // Copyright(c) 2023 Realtek Semiconductor Corp. |
| // |
| // |
| |
| #include <linux/delay.h> |
| #include <linux/device.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/module.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/soundwire/sdw_registers.h> |
| #include "rt712-sdca.h" |
| #include "rt712-sdca-sdw.h" |
| |
| static bool rt712_sdca_readable_register(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case 0x201a ... 0x201f: |
| case 0x2029 ... 0x202a: |
| case 0x202d ... 0x2034: |
| case 0x2230 ... 0x2232: |
| case 0x2f01 ... 0x2f0a: |
| case 0x2f35 ... 0x2f36: |
| case 0x2f50: |
| case 0x2f54: |
| case 0x2f58 ... 0x2f5d: |
| case 0x3201: |
| case 0x320c: |
| case 0x3301 ... 0x3303: |
| case SDW_SDCA_CTL(FUNC_NUM_JACK_CODEC, RT712_SDCA_ENT_GE49, RT712_SDCA_CTL_SELECTED_MODE, 0): |
| case SDW_SDCA_CTL(FUNC_NUM_JACK_CODEC, RT712_SDCA_ENT_GE49, RT712_SDCA_CTL_DETECTED_MODE, 0): |
| case SDW_SDCA_CTL(FUNC_NUM_HID, RT712_SDCA_ENT_HID01, RT712_SDCA_CTL_HIDTX_CURRENT_OWNER, 0) ... |
| SDW_SDCA_CTL(FUNC_NUM_HID, RT712_SDCA_ENT_HID01, RT712_SDCA_CTL_HIDTX_MESSAGE_LENGTH, 0): |
| case RT712_BUF_ADDR_HID1 ... RT712_BUF_ADDR_HID2: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static bool rt712_sdca_volatile_register(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case 0x201b: |
| case 0x201c: |
| case 0x201d: |
| case 0x201f: |
| case 0x202d ... 0x202f: |
| case 0x2230: |
| case 0x2f01: |
| case 0x2f35: |
| case 0x320c: |
| case SDW_SDCA_CTL(FUNC_NUM_JACK_CODEC, RT712_SDCA_ENT_GE49, RT712_SDCA_CTL_DETECTED_MODE, 0): |
| case SDW_SDCA_CTL(FUNC_NUM_HID, RT712_SDCA_ENT_HID01, RT712_SDCA_CTL_HIDTX_CURRENT_OWNER, 0) ... |
| SDW_SDCA_CTL(FUNC_NUM_HID, RT712_SDCA_ENT_HID01, RT712_SDCA_CTL_HIDTX_MESSAGE_LENGTH, 0): |
| case RT712_BUF_ADDR_HID1 ... RT712_BUF_ADDR_HID2: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static bool rt712_sdca_mbq_readable_register(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case 0x2000000 ... 0x200008e: |
| case 0x5300000 ... 0x530000e: |
| case 0x5400000 ... 0x540000e: |
| case 0x5600000 ... 0x5600008: |
| case 0x5700000 ... 0x570000d: |
| case 0x5800000 ... 0x5800021: |
| case 0x5900000 ... 0x5900028: |
| case 0x5a00000 ... 0x5a00009: |
| case 0x5b00000 ... 0x5b00051: |
| case 0x5c00000 ... 0x5c0009a: |
| case 0x5d00000 ... 0x5d00009: |
| case 0x5f00000 ... 0x5f00030: |
| case 0x6100000 ... 0x6100068: |
| case SDW_SDCA_CTL(FUNC_NUM_JACK_CODEC, RT712_SDCA_ENT_USER_FU05, RT712_SDCA_CTL_FU_VOLUME, CH_L): |
| case SDW_SDCA_CTL(FUNC_NUM_JACK_CODEC, RT712_SDCA_ENT_USER_FU05, RT712_SDCA_CTL_FU_VOLUME, CH_R): |
| case SDW_SDCA_CTL(FUNC_NUM_JACK_CODEC, RT712_SDCA_ENT_USER_FU0F, RT712_SDCA_CTL_FU_VOLUME, CH_L): |
| case SDW_SDCA_CTL(FUNC_NUM_JACK_CODEC, RT712_SDCA_ENT_USER_FU0F, RT712_SDCA_CTL_FU_VOLUME, CH_R): |
| case SDW_SDCA_CTL(FUNC_NUM_AMP, RT712_SDCA_ENT_USER_FU06, RT712_SDCA_CTL_FU_VOLUME, CH_L): |
| case SDW_SDCA_CTL(FUNC_NUM_AMP, RT712_SDCA_ENT_USER_FU06, RT712_SDCA_CTL_FU_VOLUME, CH_R): |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static bool rt712_sdca_mbq_volatile_register(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case 0x2000000: |
| case 0x200001a: |
| case 0x2000024: |
| case 0x2000046: |
| case 0x200008a: |
| case 0x5800000: |
| case 0x5800001: |
| case 0x6100008: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static const struct regmap_config rt712_sdca_regmap = { |
| .reg_bits = 32, |
| .val_bits = 8, |
| .readable_reg = rt712_sdca_readable_register, |
| .volatile_reg = rt712_sdca_volatile_register, |
| .max_register = 0x44ffffff, |
| .reg_defaults = rt712_sdca_reg_defaults, |
| .num_reg_defaults = ARRAY_SIZE(rt712_sdca_reg_defaults), |
| .cache_type = REGCACHE_MAPLE, |
| .use_single_read = true, |
| .use_single_write = true, |
| }; |
| |
| static const struct regmap_config rt712_sdca_mbq_regmap = { |
| .name = "sdw-mbq", |
| .reg_bits = 32, |
| .val_bits = 16, |
| .readable_reg = rt712_sdca_mbq_readable_register, |
| .volatile_reg = rt712_sdca_mbq_volatile_register, |
| .max_register = 0x41000312, |
| .reg_defaults = rt712_sdca_mbq_defaults, |
| .num_reg_defaults = ARRAY_SIZE(rt712_sdca_mbq_defaults), |
| .cache_type = REGCACHE_MAPLE, |
| .use_single_read = true, |
| .use_single_write = true, |
| }; |
| |
| static int rt712_sdca_update_status(struct sdw_slave *slave, |
| enum sdw_slave_status status) |
| { |
| struct rt712_sdca_priv *rt712 = dev_get_drvdata(&slave->dev); |
| |
| if (status == SDW_SLAVE_UNATTACHED) |
| rt712->hw_init = false; |
| |
| if (status == SDW_SLAVE_ATTACHED) { |
| if (rt712->hs_jack) { |
| /* |
| * Due to the SCP_SDCA_INTMASK will be cleared by any reset, and then |
| * if the device attached again, we will need to set the setting back. |
| * It could avoid losing the jack detection interrupt. |
| * This also could sync with the cache value as the rt712_sdca_jack_init set. |
| */ |
| sdw_write_no_pm(rt712->slave, SDW_SCP_SDCA_INTMASK1, |
| SDW_SCP_SDCA_INTMASK_SDCA_0); |
| sdw_write_no_pm(rt712->slave, SDW_SCP_SDCA_INTMASK2, |
| SDW_SCP_SDCA_INTMASK_SDCA_8); |
| } |
| } |
| |
| /* |
| * Perform initialization only if slave status is present and |
| * hw_init flag is false |
| */ |
| if (rt712->hw_init || status != SDW_SLAVE_ATTACHED) |
| return 0; |
| |
| /* perform I/O transfers required for Slave initialization */ |
| return rt712_sdca_io_init(&slave->dev, slave); |
| } |
| |
| static int rt712_sdca_read_prop(struct sdw_slave *slave) |
| { |
| struct sdw_slave_prop *prop = &slave->prop; |
| int nval; |
| int i, j; |
| u32 bit; |
| unsigned long addr; |
| struct sdw_dpn_prop *dpn; |
| |
| prop->scp_int1_mask = SDW_SCP_INT1_BUS_CLASH | SDW_SCP_INT1_PARITY; |
| prop->quirks = SDW_SLAVE_QUIRKS_INVALID_INITIAL_PARITY; |
| |
| prop->paging_support = true; |
| |
| /* first we need to allocate memory for set bits in port lists */ |
| prop->source_ports = BIT(4); /* BITMAP: 00010000 */ |
| prop->sink_ports = BIT(3) | BIT(1); /* BITMAP: 00001010 */ |
| |
| nval = hweight32(prop->source_ports); |
| prop->src_dpn_prop = devm_kcalloc(&slave->dev, nval, |
| sizeof(*prop->src_dpn_prop), GFP_KERNEL); |
| if (!prop->src_dpn_prop) |
| return -ENOMEM; |
| |
| i = 0; |
| dpn = prop->src_dpn_prop; |
| addr = prop->source_ports; |
| for_each_set_bit(bit, &addr, 32) { |
| dpn[i].num = bit; |
| dpn[i].type = SDW_DPN_FULL; |
| dpn[i].simple_ch_prep_sm = true; |
| dpn[i].ch_prep_timeout = 10; |
| i++; |
| } |
| |
| /* do this again for sink now */ |
| nval = hweight32(prop->sink_ports); |
| prop->sink_dpn_prop = devm_kcalloc(&slave->dev, nval, |
| sizeof(*prop->sink_dpn_prop), GFP_KERNEL); |
| if (!prop->sink_dpn_prop) |
| return -ENOMEM; |
| |
| j = 0; |
| dpn = prop->sink_dpn_prop; |
| addr = prop->sink_ports; |
| for_each_set_bit(bit, &addr, 32) { |
| dpn[j].num = bit; |
| dpn[j].type = SDW_DPN_FULL; |
| dpn[j].simple_ch_prep_sm = true; |
| dpn[j].ch_prep_timeout = 10; |
| j++; |
| } |
| |
| /* set the timeout values */ |
| prop->clk_stop_timeout = 1380; |
| |
| /* wake-up event */ |
| prop->wake_capable = 1; |
| |
| return 0; |
| } |
| |
| static int rt712_sdca_interrupt_callback(struct sdw_slave *slave, |
| struct sdw_slave_intr_status *status) |
| { |
| struct rt712_sdca_priv *rt712 = dev_get_drvdata(&slave->dev); |
| int ret, stat; |
| int count = 0, retry = 3; |
| unsigned int sdca_cascade, scp_sdca_stat1, scp_sdca_stat2 = 0; |
| |
| dev_dbg(&slave->dev, |
| "%s control_port_stat=%x, sdca_cascade=%x", __func__, |
| status->control_port, status->sdca_cascade); |
| |
| if (cancel_delayed_work_sync(&rt712->jack_detect_work)) { |
| dev_warn(&slave->dev, "%s the pending delayed_work was cancelled", __func__); |
| /* avoid the HID owner doesn't change to device */ |
| if (rt712->scp_sdca_stat2) |
| scp_sdca_stat2 = rt712->scp_sdca_stat2; |
| } |
| |
| /* |
| * The critical section below intentionally protects a rather large piece of code. |
| * We don't want to allow the system suspend to disable an interrupt while we are |
| * processing it, which could be problematic given the quirky SoundWire interrupt |
| * scheme. We do want however to prevent new workqueues from being scheduled if |
| * the disable_irq flag was set during system suspend. |
| */ |
| mutex_lock(&rt712->disable_irq_lock); |
| |
| ret = sdw_read_no_pm(rt712->slave, SDW_SCP_SDCA_INT1); |
| if (ret < 0) |
| goto io_error; |
| rt712->scp_sdca_stat1 = ret; |
| ret = sdw_read_no_pm(rt712->slave, SDW_SCP_SDCA_INT2); |
| if (ret < 0) |
| goto io_error; |
| rt712->scp_sdca_stat2 = ret; |
| if (scp_sdca_stat2) |
| rt712->scp_sdca_stat2 |= scp_sdca_stat2; |
| |
| do { |
| /* clear flag */ |
| ret = sdw_read_no_pm(rt712->slave, SDW_SCP_SDCA_INT1); |
| if (ret < 0) |
| goto io_error; |
| if (ret & SDW_SCP_SDCA_INTMASK_SDCA_0) { |
| ret = sdw_write_no_pm(rt712->slave, SDW_SCP_SDCA_INT1, |
| SDW_SCP_SDCA_INTMASK_SDCA_0); |
| if (ret < 0) |
| goto io_error; |
| } |
| ret = sdw_read_no_pm(rt712->slave, SDW_SCP_SDCA_INT2); |
| if (ret < 0) |
| goto io_error; |
| if (ret & SDW_SCP_SDCA_INTMASK_SDCA_8) { |
| ret = sdw_write_no_pm(rt712->slave, SDW_SCP_SDCA_INT2, |
| SDW_SCP_SDCA_INTMASK_SDCA_8); |
| if (ret < 0) |
| goto io_error; |
| } |
| |
| /* check if flag clear or not */ |
| ret = sdw_read_no_pm(rt712->slave, SDW_DP0_INT); |
| if (ret < 0) |
| goto io_error; |
| sdca_cascade = ret & SDW_DP0_SDCA_CASCADE; |
| |
| ret = sdw_read_no_pm(rt712->slave, SDW_SCP_SDCA_INT1); |
| if (ret < 0) |
| goto io_error; |
| scp_sdca_stat1 = ret & SDW_SCP_SDCA_INTMASK_SDCA_0; |
| |
| ret = sdw_read_no_pm(rt712->slave, SDW_SCP_SDCA_INT2); |
| if (ret < 0) |
| goto io_error; |
| scp_sdca_stat2 = ret & SDW_SCP_SDCA_INTMASK_SDCA_8; |
| |
| stat = scp_sdca_stat1 || scp_sdca_stat2 || sdca_cascade; |
| |
| count++; |
| } while (stat != 0 && count < retry); |
| |
| if (stat) |
| dev_warn(&slave->dev, |
| "%s scp_sdca_stat1=0x%x, scp_sdca_stat2=0x%x\n", __func__, |
| rt712->scp_sdca_stat1, rt712->scp_sdca_stat2); |
| |
| if (status->sdca_cascade && !rt712->disable_irq) |
| mod_delayed_work(system_power_efficient_wq, |
| &rt712->jack_detect_work, msecs_to_jiffies(30)); |
| |
| mutex_unlock(&rt712->disable_irq_lock); |
| |
| return 0; |
| |
| io_error: |
| mutex_unlock(&rt712->disable_irq_lock); |
| pr_err_ratelimited("IO error in %s, ret %d\n", __func__, ret); |
| return ret; |
| } |
| |
| static struct sdw_slave_ops rt712_sdca_slave_ops = { |
| .read_prop = rt712_sdca_read_prop, |
| .interrupt_callback = rt712_sdca_interrupt_callback, |
| .update_status = rt712_sdca_update_status, |
| }; |
| |
| static int rt712_sdca_sdw_probe(struct sdw_slave *slave, |
| const struct sdw_device_id *id) |
| { |
| struct regmap *regmap, *mbq_regmap; |
| |
| /* Regmap Initialization */ |
| mbq_regmap = devm_regmap_init_sdw_mbq(slave, &rt712_sdca_mbq_regmap); |
| if (IS_ERR(mbq_regmap)) |
| return PTR_ERR(mbq_regmap); |
| |
| regmap = devm_regmap_init_sdw(slave, &rt712_sdca_regmap); |
| if (IS_ERR(regmap)) |
| return PTR_ERR(regmap); |
| |
| return rt712_sdca_init(&slave->dev, regmap, mbq_regmap, slave); |
| } |
| |
| static int rt712_sdca_sdw_remove(struct sdw_slave *slave) |
| { |
| struct rt712_sdca_priv *rt712 = dev_get_drvdata(&slave->dev); |
| |
| if (rt712->hw_init) { |
| cancel_delayed_work_sync(&rt712->jack_detect_work); |
| cancel_delayed_work_sync(&rt712->jack_btn_check_work); |
| } |
| |
| if (rt712->first_hw_init) |
| pm_runtime_disable(&slave->dev); |
| |
| mutex_destroy(&rt712->calibrate_mutex); |
| mutex_destroy(&rt712->disable_irq_lock); |
| |
| return 0; |
| } |
| |
| static const struct sdw_device_id rt712_sdca_id[] = { |
| SDW_SLAVE_ENTRY_EXT(0x025d, 0x712, 0x3, 0x1, 0), |
| SDW_SLAVE_ENTRY_EXT(0x025d, 0x713, 0x3, 0x1, 0), |
| SDW_SLAVE_ENTRY_EXT(0x025d, 0x716, 0x3, 0x1, 0), |
| SDW_SLAVE_ENTRY_EXT(0x025d, 0x717, 0x3, 0x1, 0), |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(sdw, rt712_sdca_id); |
| |
| static int __maybe_unused rt712_sdca_dev_suspend(struct device *dev) |
| { |
| struct rt712_sdca_priv *rt712 = dev_get_drvdata(dev); |
| |
| if (!rt712->hw_init) |
| return 0; |
| |
| cancel_delayed_work_sync(&rt712->jack_detect_work); |
| cancel_delayed_work_sync(&rt712->jack_btn_check_work); |
| |
| regcache_cache_only(rt712->regmap, true); |
| regcache_cache_only(rt712->mbq_regmap, true); |
| |
| return 0; |
| } |
| |
| static int __maybe_unused rt712_sdca_dev_system_suspend(struct device *dev) |
| { |
| struct rt712_sdca_priv *rt712_sdca = dev_get_drvdata(dev); |
| struct sdw_slave *slave = dev_to_sdw_dev(dev); |
| int ret1, ret2; |
| |
| if (!rt712_sdca->hw_init) |
| return 0; |
| |
| /* |
| * prevent new interrupts from being handled after the |
| * deferred work completes and before the parent disables |
| * interrupts on the link |
| */ |
| mutex_lock(&rt712_sdca->disable_irq_lock); |
| rt712_sdca->disable_irq = true; |
| ret1 = sdw_update_no_pm(slave, SDW_SCP_SDCA_INTMASK1, |
| SDW_SCP_SDCA_INTMASK_SDCA_0, 0); |
| ret2 = sdw_update_no_pm(slave, SDW_SCP_SDCA_INTMASK2, |
| SDW_SCP_SDCA_INTMASK_SDCA_8, 0); |
| mutex_unlock(&rt712_sdca->disable_irq_lock); |
| |
| if (ret1 < 0 || ret2 < 0) { |
| /* log but don't prevent suspend from happening */ |
| dev_dbg(&slave->dev, "%s: could not disable SDCA interrupts\n:", __func__); |
| } |
| |
| return rt712_sdca_dev_suspend(dev); |
| } |
| |
| #define RT712_PROBE_TIMEOUT 5000 |
| |
| static int __maybe_unused rt712_sdca_dev_resume(struct device *dev) |
| { |
| struct sdw_slave *slave = dev_to_sdw_dev(dev); |
| struct rt712_sdca_priv *rt712 = dev_get_drvdata(dev); |
| unsigned long time; |
| |
| if (!rt712->first_hw_init) |
| return 0; |
| |
| if (!slave->unattach_request) { |
| if (rt712->disable_irq == true) { |
| mutex_lock(&rt712->disable_irq_lock); |
| sdw_write_no_pm(slave, SDW_SCP_SDCA_INTMASK1, SDW_SCP_SDCA_INTMASK_SDCA_0); |
| sdw_write_no_pm(slave, SDW_SCP_SDCA_INTMASK2, SDW_SCP_SDCA_INTMASK_SDCA_8); |
| rt712->disable_irq = false; |
| mutex_unlock(&rt712->disable_irq_lock); |
| } |
| goto regmap_sync; |
| } |
| |
| time = wait_for_completion_timeout(&slave->initialization_complete, |
| msecs_to_jiffies(RT712_PROBE_TIMEOUT)); |
| if (!time) { |
| dev_err(&slave->dev, "Initialization not complete, timed out\n"); |
| sdw_show_ping_status(slave->bus, true); |
| |
| return -ETIMEDOUT; |
| } |
| |
| regmap_sync: |
| slave->unattach_request = 0; |
| regcache_cache_only(rt712->regmap, false); |
| regcache_sync(rt712->regmap); |
| regcache_cache_only(rt712->mbq_regmap, false); |
| regcache_sync(rt712->mbq_regmap); |
| return 0; |
| } |
| |
| static const struct dev_pm_ops rt712_sdca_pm = { |
| SET_SYSTEM_SLEEP_PM_OPS(rt712_sdca_dev_system_suspend, rt712_sdca_dev_resume) |
| SET_RUNTIME_PM_OPS(rt712_sdca_dev_suspend, rt712_sdca_dev_resume, NULL) |
| }; |
| |
| static struct sdw_driver rt712_sdca_sdw_driver = { |
| .driver = { |
| .name = "rt712-sdca", |
| .owner = THIS_MODULE, |
| .pm = &rt712_sdca_pm, |
| }, |
| .probe = rt712_sdca_sdw_probe, |
| .remove = rt712_sdca_sdw_remove, |
| .ops = &rt712_sdca_slave_ops, |
| .id_table = rt712_sdca_id, |
| }; |
| module_sdw_driver(rt712_sdca_sdw_driver); |
| |
| MODULE_DESCRIPTION("ASoC RT712 SDCA SDW driver"); |
| MODULE_AUTHOR("Shuming Fan <shumingf@realtek.com>"); |
| MODULE_LICENSE("GPL"); |