| /* |
| * drxk_hard: DRX-K DVB-C/T demodulator driver |
| * |
| * Copyright (C) 2010-2011 Digital Devices GmbH |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * version 2 only, as published by the Free Software Foundation. |
| * |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA |
| * 02110-1301, USA |
| * Or, point your browser to http://www.gnu.org/copyleft/gpl.html |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/init.h> |
| #include <linux/delay.h> |
| #include <linux/firmware.h> |
| #include <linux/i2c.h> |
| #include <asm/div64.h> |
| |
| #include "dvb_frontend.h" |
| #include "drxk.h" |
| #include "drxk_hard.h" |
| |
| static int PowerDownDVBT(struct drxk_state *state, bool setPowerMode); |
| static int PowerDownQAM(struct drxk_state *state); |
| static int SetDVBTStandard(struct drxk_state *state, |
| enum OperationMode oMode); |
| static int SetQAMStandard(struct drxk_state *state, |
| enum OperationMode oMode); |
| static int SetQAM(struct drxk_state *state, u16 IntermediateFreqkHz, |
| s32 tunerFreqOffset); |
| static int SetDVBTStandard(struct drxk_state *state, |
| enum OperationMode oMode); |
| static int DVBTStart(struct drxk_state *state); |
| static int SetDVBT(struct drxk_state *state, u16 IntermediateFreqkHz, |
| s32 tunerFreqOffset); |
| static int GetQAMLockStatus(struct drxk_state *state, u32 *pLockStatus); |
| static int GetDVBTLockStatus(struct drxk_state *state, u32 *pLockStatus); |
| static int SwitchAntennaToQAM(struct drxk_state *state); |
| static int SwitchAntennaToDVBT(struct drxk_state *state); |
| |
| static bool IsDVBT(struct drxk_state *state) |
| { |
| return state->m_OperationMode == OM_DVBT; |
| } |
| |
| static bool IsQAM(struct drxk_state *state) |
| { |
| return state->m_OperationMode == OM_QAM_ITU_A || |
| state->m_OperationMode == OM_QAM_ITU_B || |
| state->m_OperationMode == OM_QAM_ITU_C; |
| } |
| |
| bool IsA1WithPatchCode(struct drxk_state *state) |
| { |
| return state->m_DRXK_A1_PATCH_CODE; |
| } |
| |
| bool IsA1WithRomCode(struct drxk_state *state) |
| { |
| return state->m_DRXK_A1_ROM_CODE; |
| } |
| |
| #define NOA1ROM 0 |
| |
| #define DRXDAP_FASI_SHORT_FORMAT(addr) (((addr) & 0xFC30FF80) == 0) |
| #define DRXDAP_FASI_LONG_FORMAT(addr) (((addr) & 0xFC30FF80) != 0) |
| |
| #define DEFAULT_MER_83 165 |
| #define DEFAULT_MER_93 250 |
| |
| #ifndef DRXK_MPEG_SERIAL_OUTPUT_PIN_DRIVE_STRENGTH |
| #define DRXK_MPEG_SERIAL_OUTPUT_PIN_DRIVE_STRENGTH (0x02) |
| #endif |
| |
| #ifndef DRXK_MPEG_PARALLEL_OUTPUT_PIN_DRIVE_STRENGTH |
| #define DRXK_MPEG_PARALLEL_OUTPUT_PIN_DRIVE_STRENGTH (0x03) |
| #endif |
| |
| #define DEFAULT_DRXK_MPEG_LOCK_TIMEOUT 700 |
| #define DEFAULT_DRXK_DEMOD_LOCK_TIMEOUT 500 |
| |
| #ifndef DRXK_KI_RAGC_ATV |
| #define DRXK_KI_RAGC_ATV 4 |
| #endif |
| #ifndef DRXK_KI_IAGC_ATV |
| #define DRXK_KI_IAGC_ATV 6 |
| #endif |
| #ifndef DRXK_KI_DAGC_ATV |
| #define DRXK_KI_DAGC_ATV 7 |
| #endif |
| |
| #ifndef DRXK_KI_RAGC_QAM |
| #define DRXK_KI_RAGC_QAM 3 |
| #endif |
| #ifndef DRXK_KI_IAGC_QAM |
| #define DRXK_KI_IAGC_QAM 4 |
| #endif |
| #ifndef DRXK_KI_DAGC_QAM |
| #define DRXK_KI_DAGC_QAM 7 |
| #endif |
| #ifndef DRXK_KI_RAGC_DVBT |
| #define DRXK_KI_RAGC_DVBT (IsA1WithPatchCode(state) ? 3 : 2) |
| #endif |
| #ifndef DRXK_KI_IAGC_DVBT |
| #define DRXK_KI_IAGC_DVBT (IsA1WithPatchCode(state) ? 4 : 2) |
| #endif |
| #ifndef DRXK_KI_DAGC_DVBT |
| #define DRXK_KI_DAGC_DVBT (IsA1WithPatchCode(state) ? 10 : 7) |
| #endif |
| |
| #ifndef DRXK_AGC_DAC_OFFSET |
| #define DRXK_AGC_DAC_OFFSET (0x800) |
| #endif |
| |
| #ifndef DRXK_BANDWIDTH_8MHZ_IN_HZ |
| #define DRXK_BANDWIDTH_8MHZ_IN_HZ (0x8B8249L) |
| #endif |
| |
| #ifndef DRXK_BANDWIDTH_7MHZ_IN_HZ |
| #define DRXK_BANDWIDTH_7MHZ_IN_HZ (0x7A1200L) |
| #endif |
| |
| #ifndef DRXK_BANDWIDTH_6MHZ_IN_HZ |
| #define DRXK_BANDWIDTH_6MHZ_IN_HZ (0x68A1B6L) |
| #endif |
| |
| #ifndef DRXK_QAM_SYMBOLRATE_MAX |
| #define DRXK_QAM_SYMBOLRATE_MAX (7233000) |
| #endif |
| |
| #define DRXK_BL_ROM_OFFSET_TAPS_DVBT 56 |
| #define DRXK_BL_ROM_OFFSET_TAPS_ITU_A 64 |
| #define DRXK_BL_ROM_OFFSET_TAPS_ITU_C 0x5FE0 |
| #define DRXK_BL_ROM_OFFSET_TAPS_BG 24 |
| #define DRXK_BL_ROM_OFFSET_TAPS_DKILLP 32 |
| #define DRXK_BL_ROM_OFFSET_TAPS_NTSC 40 |
| #define DRXK_BL_ROM_OFFSET_TAPS_FM 48 |
| #define DRXK_BL_ROM_OFFSET_UCODE 0 |
| |
| #define DRXK_BLC_TIMEOUT 100 |
| |
| #define DRXK_BLCC_NR_ELEMENTS_TAPS 2 |
| #define DRXK_BLCC_NR_ELEMENTS_UCODE 6 |
| |
| #define DRXK_BLDC_NR_ELEMENTS_TAPS 28 |
| |
| #ifndef DRXK_OFDM_NE_NOTCH_WIDTH |
| #define DRXK_OFDM_NE_NOTCH_WIDTH (4) |
| #endif |
| |
| #define DRXK_QAM_SL_SIG_POWER_QAM16 (40960) |
| #define DRXK_QAM_SL_SIG_POWER_QAM32 (20480) |
| #define DRXK_QAM_SL_SIG_POWER_QAM64 (43008) |
| #define DRXK_QAM_SL_SIG_POWER_QAM128 (20992) |
| #define DRXK_QAM_SL_SIG_POWER_QAM256 (43520) |
| |
| static unsigned int debug; |
| module_param(debug, int, 0644); |
| MODULE_PARM_DESC(debug, "enable debug messages"); |
| |
| #define dprintk(level, fmt, arg...) do { \ |
| if (debug >= level) \ |
| printk(KERN_DEBUG "drxk: %s" fmt, __func__, ## arg); \ |
| } while (0) |
| |
| |
| static inline u32 MulDiv32(u32 a, u32 b, u32 c) |
| { |
| u64 tmp64; |
| |
| tmp64 = (u64) a * (u64) b; |
| do_div(tmp64, c); |
| |
| return (u32) tmp64; |
| } |
| |
| inline u32 Frac28a(u32 a, u32 c) |
| { |
| int i = 0; |
| u32 Q1 = 0; |
| u32 R0 = 0; |
| |
| R0 = (a % c) << 4; /* 32-28 == 4 shifts possible at max */ |
| Q1 = a / c; /* integer part, only the 4 least significant bits |
| will be visible in the result */ |
| |
| /* division using radix 16, 7 nibbles in the result */ |
| for (i = 0; i < 7; i++) { |
| Q1 = (Q1 << 4) | (R0 / c); |
| R0 = (R0 % c) << 4; |
| } |
| /* rounding */ |
| if ((R0 >> 3) >= c) |
| Q1++; |
| |
| return Q1; |
| } |
| |
| static u32 Log10Times100(u32 x) |
| { |
| static const u8 scale = 15; |
| static const u8 indexWidth = 5; |
| u8 i = 0; |
| u32 y = 0; |
| u32 d = 0; |
| u32 k = 0; |
| u32 r = 0; |
| /* |
| log2lut[n] = (1<<scale) * 200 * log2(1.0 + ((1.0/(1<<INDEXWIDTH)) * n)) |
| 0 <= n < ((1<<INDEXWIDTH)+1) |
| */ |
| |
| static const u32 log2lut[] = { |
| 0, /* 0.000000 */ |
| 290941, /* 290941.300628 */ |
| 573196, /* 573196.476418 */ |
| 847269, /* 847269.179851 */ |
| 1113620, /* 1113620.489452 */ |
| 1372674, /* 1372673.576986 */ |
| 1624818, /* 1624817.752104 */ |
| 1870412, /* 1870411.981536 */ |
| 2109788, /* 2109787.962654 */ |
| 2343253, /* 2343252.817465 */ |
| 2571091, /* 2571091.461923 */ |
| 2793569, /* 2793568.696416 */ |
| 3010931, /* 3010931.055901 */ |
| 3223408, /* 3223408.452106 */ |
| 3431216, /* 3431215.635215 */ |
| 3634553, /* 3634553.498355 */ |
| 3833610, /* 3833610.244726 */ |
| 4028562, /* 4028562.434393 */ |
| 4219576, /* 4219575.925308 */ |
| 4406807, /* 4406806.721144 */ |
| 4590402, /* 4590401.736809 */ |
| 4770499, /* 4770499.491025 */ |
| 4947231, /* 4947230.734179 */ |
| 5120719, /* 5120719.018555 */ |
| 5291081, /* 5291081.217197 */ |
| 5458428, /* 5458427.996830 */ |
| 5622864, /* 5622864.249668 */ |
| 5784489, /* 5784489.488298 */ |
| 5943398, /* 5943398.207380 */ |
| 6099680, /* 6099680.215452 */ |
| 6253421, /* 6253420.939751 */ |
| 6404702, /* 6404701.706649 */ |
| 6553600, /* 6553600.000000 */ |
| }; |
| |
| |
| if (x == 0) |
| return 0; |
| |
| /* Scale x (normalize) */ |
| /* computing y in log(x/y) = log(x) - log(y) */ |
| if ((x & ((0xffffffff) << (scale + 1))) == 0) { |
| for (k = scale; k > 0; k--) { |
| if (x & (((u32) 1) << scale)) |
| break; |
| x <<= 1; |
| } |
| } else { |
| for (k = scale; k < 31; k++) { |
| if ((x & (((u32) (-1)) << (scale + 1))) == 0) |
| break; |
| x >>= 1; |
| } |
| } |
| /* |
| Now x has binary point between bit[scale] and bit[scale-1] |
| and 1.0 <= x < 2.0 */ |
| |
| /* correction for divison: log(x) = log(x/y)+log(y) */ |
| y = k * ((((u32) 1) << scale) * 200); |
| |
| /* remove integer part */ |
| x &= ((((u32) 1) << scale) - 1); |
| /* get index */ |
| i = (u8) (x >> (scale - indexWidth)); |
| /* compute delta (x - a) */ |
| d = x & ((((u32) 1) << (scale - indexWidth)) - 1); |
| /* compute log, multiplication (d* (..)) must be within range ! */ |
| y += log2lut[i] + |
| ((d * (log2lut[i + 1] - log2lut[i])) >> (scale - indexWidth)); |
| /* Conver to log10() */ |
| y /= 108853; /* (log2(10) << scale) */ |
| r = (y >> 1); |
| /* rounding */ |
| if (y & ((u32) 1)) |
| r++; |
| return r; |
| } |
| |
| /****************************************************************************/ |
| /* I2C **********************************************************************/ |
| /****************************************************************************/ |
| |
| static int i2c_read1(struct i2c_adapter *adapter, u8 adr, u8 *val) |
| { |
| struct i2c_msg msgs[1] = { {.addr = adr, .flags = I2C_M_RD, |
| .buf = val, .len = 1} |
| }; |
| |
| return i2c_transfer(adapter, msgs, 1); |
| } |
| |
| static int i2c_write(struct i2c_adapter *adap, u8 adr, u8 *data, int len) |
| { |
| int status; |
| struct i2c_msg msg = { |
| .addr = adr, .flags = 0, .buf = data, .len = len }; |
| |
| dprintk(3, ":"); |
| if (debug > 2) { |
| int i; |
| for (i = 0; i < len; i++) |
| printk(KERN_CONT " %02x", data[i]); |
| printk(KERN_CONT "\n"); |
| } |
| status = i2c_transfer(adap, &msg, 1); |
| if (status >= 0 && status != 1) |
| status = -EIO; |
| |
| if (status < 0) |
| printk(KERN_ERR "drxk: i2c write error at addr 0x%02x\n", adr); |
| |
| return status; |
| } |
| |
| static int i2c_read(struct i2c_adapter *adap, |
| u8 adr, u8 *msg, int len, u8 *answ, int alen) |
| { |
| int status; |
| struct i2c_msg msgs[2] = { |
| {.addr = adr, .flags = 0, |
| .buf = msg, .len = len}, |
| {.addr = adr, .flags = I2C_M_RD, |
| .buf = answ, .len = alen} |
| }; |
| |
| status = i2c_transfer(adap, msgs, 2); |
| if (status != 2) { |
| if (debug > 2) |
| printk(KERN_CONT ": ERROR!\n"); |
| if (status >= 0) |
| status = -EIO; |
| |
| printk(KERN_ERR "drxk: i2c read error at addr 0x%02x\n", adr); |
| return status; |
| } |
| if (debug > 2) { |
| int i; |
| dprintk(2, ": read from"); |
| for (i = 0; i < len; i++) |
| printk(KERN_CONT " %02x", msg[i]); |
| printk(KERN_CONT ", value = "); |
| for (i = 0; i < alen; i++) |
| printk(KERN_CONT " %02x", answ[i]); |
| printk(KERN_CONT "\n"); |
| } |
| return 0; |
| } |
| |
| static int read16_flags(struct drxk_state *state, u32 reg, u16 *data, u8 flags) |
| { |
| int status; |
| u8 adr = state->demod_address, mm1[4], mm2[2], len; |
| |
| if (state->single_master) |
| flags |= 0xC0; |
| |
| if (DRXDAP_FASI_LONG_FORMAT(reg) || (flags != 0)) { |
| mm1[0] = (((reg << 1) & 0xFF) | 0x01); |
| mm1[1] = ((reg >> 16) & 0xFF); |
| mm1[2] = ((reg >> 24) & 0xFF) | flags; |
| mm1[3] = ((reg >> 7) & 0xFF); |
| len = 4; |
| } else { |
| mm1[0] = ((reg << 1) & 0xFF); |
| mm1[1] = (((reg >> 16) & 0x0F) | ((reg >> 18) & 0xF0)); |
| len = 2; |
| } |
| dprintk(2, "(0x%08x, 0x%02x)\n", reg, flags); |
| status = i2c_read(state->i2c, adr, mm1, len, mm2, 2); |
| if (status < 0) |
| return status; |
| if (data) |
| *data = mm2[0] | (mm2[1] << 8); |
| |
| return 0; |
| } |
| |
| static int read16(struct drxk_state *state, u32 reg, u16 *data) |
| { |
| return read16_flags(state, reg, data, 0); |
| } |
| |
| static int read32_flags(struct drxk_state *state, u32 reg, u32 *data, u8 flags) |
| { |
| int status; |
| u8 adr = state->demod_address, mm1[4], mm2[4], len; |
| |
| if (state->single_master) |
| flags |= 0xC0; |
| |
| if (DRXDAP_FASI_LONG_FORMAT(reg) || (flags != 0)) { |
| mm1[0] = (((reg << 1) & 0xFF) | 0x01); |
| mm1[1] = ((reg >> 16) & 0xFF); |
| mm1[2] = ((reg >> 24) & 0xFF) | flags; |
| mm1[3] = ((reg >> 7) & 0xFF); |
| len = 4; |
| } else { |
| mm1[0] = ((reg << 1) & 0xFF); |
| mm1[1] = (((reg >> 16) & 0x0F) | ((reg >> 18) & 0xF0)); |
| len = 2; |
| } |
| dprintk(2, "(0x%08x, 0x%02x)\n", reg, flags); |
| status = i2c_read(state->i2c, adr, mm1, len, mm2, 4); |
| if (status < 0) |
| return status; |
| if (data) |
| *data = mm2[0] | (mm2[1] << 8) | |
| (mm2[2] << 16) | (mm2[3] << 24); |
| |
| return 0; |
| } |
| |
| static int read32(struct drxk_state *state, u32 reg, u32 *data) |
| { |
| return read32_flags(state, reg, data, 0); |
| } |
| |
| static int write16_flags(struct drxk_state *state, u32 reg, u16 data, u8 flags) |
| { |
| u8 adr = state->demod_address, mm[6], len; |
| |
| if (state->single_master) |
| flags |= 0xC0; |
| if (DRXDAP_FASI_LONG_FORMAT(reg) || (flags != 0)) { |
| mm[0] = (((reg << 1) & 0xFF) | 0x01); |
| mm[1] = ((reg >> 16) & 0xFF); |
| mm[2] = ((reg >> 24) & 0xFF) | flags; |
| mm[3] = ((reg >> 7) & 0xFF); |
| len = 4; |
| } else { |
| mm[0] = ((reg << 1) & 0xFF); |
| mm[1] = (((reg >> 16) & 0x0F) | ((reg >> 18) & 0xF0)); |
| len = 2; |
| } |
| mm[len] = data & 0xff; |
| mm[len + 1] = (data >> 8) & 0xff; |
| |
| dprintk(2, "(0x%08x, 0x%04x, 0x%02x)\n", reg, data, flags); |
| return i2c_write(state->i2c, adr, mm, len + 2); |
| } |
| |
| static int write16(struct drxk_state *state, u32 reg, u16 data) |
| { |
| return write16_flags(state, reg, data, 0); |
| } |
| |
| static int write32_flags(struct drxk_state *state, u32 reg, u32 data, u8 flags) |
| { |
| u8 adr = state->demod_address, mm[8], len; |
| |
| if (state->single_master) |
| flags |= 0xC0; |
| if (DRXDAP_FASI_LONG_FORMAT(reg) || (flags != 0)) { |
| mm[0] = (((reg << 1) & 0xFF) | 0x01); |
| mm[1] = ((reg >> 16) & 0xFF); |
| mm[2] = ((reg >> 24) & 0xFF) | flags; |
| mm[3] = ((reg >> 7) & 0xFF); |
| len = 4; |
| } else { |
| mm[0] = ((reg << 1) & 0xFF); |
| mm[1] = (((reg >> 16) & 0x0F) | ((reg >> 18) & 0xF0)); |
| len = 2; |
| } |
| mm[len] = data & 0xff; |
| mm[len + 1] = (data >> 8) & 0xff; |
| mm[len + 2] = (data >> 16) & 0xff; |
| mm[len + 3] = (data >> 24) & 0xff; |
| dprintk(2, "(0x%08x, 0x%08x, 0x%02x)\n", reg, data, flags); |
| |
| return i2c_write(state->i2c, adr, mm, len + 4); |
| } |
| |
| static int write32(struct drxk_state *state, u32 reg, u32 data) |
| { |
| return write32_flags(state, reg, data, 0); |
| } |
| |
| static int write_block(struct drxk_state *state, u32 Address, |
| const int BlockSize, const u8 pBlock[]) |
| { |
| int status = 0, BlkSize = BlockSize; |
| u8 Flags = 0; |
| |
| if (state->single_master) |
| Flags |= 0xC0; |
| |
| while (BlkSize > 0) { |
| int Chunk = BlkSize > state->m_ChunkSize ? |
| state->m_ChunkSize : BlkSize; |
| u8 *AdrBuf = &state->Chunk[0]; |
| u32 AdrLength = 0; |
| |
| if (DRXDAP_FASI_LONG_FORMAT(Address) || (Flags != 0)) { |
| AdrBuf[0] = (((Address << 1) & 0xFF) | 0x01); |
| AdrBuf[1] = ((Address >> 16) & 0xFF); |
| AdrBuf[2] = ((Address >> 24) & 0xFF); |
| AdrBuf[3] = ((Address >> 7) & 0xFF); |
| AdrBuf[2] |= Flags; |
| AdrLength = 4; |
| if (Chunk == state->m_ChunkSize) |
| Chunk -= 2; |
| } else { |
| AdrBuf[0] = ((Address << 1) & 0xFF); |
| AdrBuf[1] = (((Address >> 16) & 0x0F) | |
| ((Address >> 18) & 0xF0)); |
| AdrLength = 2; |
| } |
| memcpy(&state->Chunk[AdrLength], pBlock, Chunk); |
| dprintk(2, "(0x%08x, 0x%02x)\n", Address, Flags); |
| if (debug > 1) { |
| int i; |
| if (pBlock) |
| for (i = 0; i < Chunk; i++) |
| printk(KERN_CONT " %02x", pBlock[i]); |
| printk(KERN_CONT "\n"); |
| } |
| status = i2c_write(state->i2c, state->demod_address, |
| &state->Chunk[0], Chunk + AdrLength); |
| if (status < 0) { |
| printk(KERN_ERR "drxk: %s: i2c write error at addr 0x%02x\n", |
| __func__, Address); |
| break; |
| } |
| pBlock += Chunk; |
| Address += (Chunk >> 1); |
| BlkSize -= Chunk; |
| } |
| return status; |
| } |
| |
| #ifndef DRXK_MAX_RETRIES_POWERUP |
| #define DRXK_MAX_RETRIES_POWERUP 20 |
| #endif |
| |
| int PowerUpDevice(struct drxk_state *state) |
| { |
| int status; |
| u8 data = 0; |
| u16 retryCount = 0; |
| |
| dprintk(1, "\n"); |
| |
| status = i2c_read1(state->i2c, state->demod_address, &data); |
| if (status < 0) { |
| do { |
| data = 0; |
| status = i2c_write(state->i2c, state->demod_address, |
| &data, 1); |
| msleep(10); |
| retryCount++; |
| if (status < 0) |
| continue; |
| status = i2c_read1(state->i2c, state->demod_address, |
| &data); |
| } while (status < 0 && |
| (retryCount < DRXK_MAX_RETRIES_POWERUP)); |
| if (status < 0 && retryCount >= DRXK_MAX_RETRIES_POWERUP) |
| goto error; |
| } |
| |
| /* Make sure all clk domains are active */ |
| status = write16(state, SIO_CC_PWD_MODE__A, SIO_CC_PWD_MODE_LEVEL_NONE); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_CC_UPDATE__A, SIO_CC_UPDATE_KEY); |
| if (status < 0) |
| goto error; |
| /* Enable pll lock tests */ |
| status = write16(state, SIO_CC_PLL_LOCK__A, 1); |
| if (status < 0) |
| goto error; |
| |
| state->m_currentPowerMode = DRX_POWER_UP; |
| |
| error: |
| if (status < 0) |
| printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); |
| |
| return status; |
| } |
| |
| |
| static int init_state(struct drxk_state *state) |
| { |
| /* |
| * FIXME: most (all?) of the values bellow should be moved into |
| * struct drxk_config, as they are probably board-specific |
| */ |
| u32 ulVSBIfAgcMode = DRXK_AGC_CTRL_AUTO; |
| u32 ulVSBIfAgcOutputLevel = 0; |
| u32 ulVSBIfAgcMinLevel = 0; |
| u32 ulVSBIfAgcMaxLevel = 0x7FFF; |
| u32 ulVSBIfAgcSpeed = 3; |
| |
| u32 ulVSBRfAgcMode = DRXK_AGC_CTRL_AUTO; |
| u32 ulVSBRfAgcOutputLevel = 0; |
| u32 ulVSBRfAgcMinLevel = 0; |
| u32 ulVSBRfAgcMaxLevel = 0x7FFF; |
| u32 ulVSBRfAgcSpeed = 3; |
| u32 ulVSBRfAgcTop = 9500; |
| u32 ulVSBRfAgcCutOffCurrent = 4000; |
| |
| u32 ulATVIfAgcMode = DRXK_AGC_CTRL_AUTO; |
| u32 ulATVIfAgcOutputLevel = 0; |
| u32 ulATVIfAgcMinLevel = 0; |
| u32 ulATVIfAgcMaxLevel = 0; |
| u32 ulATVIfAgcSpeed = 3; |
| |
| u32 ulATVRfAgcMode = DRXK_AGC_CTRL_OFF; |
| u32 ulATVRfAgcOutputLevel = 0; |
| u32 ulATVRfAgcMinLevel = 0; |
| u32 ulATVRfAgcMaxLevel = 0; |
| u32 ulATVRfAgcTop = 9500; |
| u32 ulATVRfAgcCutOffCurrent = 4000; |
| u32 ulATVRfAgcSpeed = 3; |
| |
| u32 ulQual83 = DEFAULT_MER_83; |
| u32 ulQual93 = DEFAULT_MER_93; |
| |
| u32 ulMpegLockTimeOut = DEFAULT_DRXK_MPEG_LOCK_TIMEOUT; |
| u32 ulDemodLockTimeOut = DEFAULT_DRXK_DEMOD_LOCK_TIMEOUT; |
| |
| /* io_pad_cfg register (8 bit reg.) MSB bit is 1 (default value) */ |
| /* io_pad_cfg_mode output mode is drive always */ |
| /* io_pad_cfg_drive is set to power 2 (23 mA) */ |
| u32 ulGPIOCfg = 0x0113; |
| u32 ulInvertTSClock = 0; |
| u32 ulTSDataStrength = DRXK_MPEG_SERIAL_OUTPUT_PIN_DRIVE_STRENGTH; |
| u32 ulDVBTBitrate = 50000000; |
| u32 ulDVBCBitrate = DRXK_QAM_SYMBOLRATE_MAX * 8; |
| |
| u32 ulInsertRSByte = 0; |
| |
| u32 ulRfMirror = 1; |
| u32 ulPowerDown = 0; |
| |
| dprintk(1, "\n"); |
| |
| state->m_hasLNA = false; |
| state->m_hasDVBT = false; |
| state->m_hasDVBC = false; |
| state->m_hasATV = false; |
| state->m_hasOOB = false; |
| state->m_hasAudio = false; |
| |
| if (!state->m_ChunkSize) |
| state->m_ChunkSize = 124; |
| |
| state->m_oscClockFreq = 0; |
| state->m_smartAntInverted = false; |
| state->m_bPDownOpenBridge = false; |
| |
| /* real system clock frequency in kHz */ |
| state->m_sysClockFreq = 151875; |
| /* Timing div, 250ns/Psys */ |
| /* Timing div, = (delay (nano seconds) * sysclk (kHz))/ 1000 */ |
| state->m_HICfgTimingDiv = ((state->m_sysClockFreq / 1000) * |
| HI_I2C_DELAY) / 1000; |
| /* Clipping */ |
| if (state->m_HICfgTimingDiv > SIO_HI_RA_RAM_PAR_2_CFG_DIV__M) |
| state->m_HICfgTimingDiv = SIO_HI_RA_RAM_PAR_2_CFG_DIV__M; |
| state->m_HICfgWakeUpKey = (state->demod_address << 1); |
| /* port/bridge/power down ctrl */ |
| state->m_HICfgCtrl = SIO_HI_RA_RAM_PAR_5_CFG_SLV0_SLAVE; |
| |
| state->m_bPowerDown = (ulPowerDown != 0); |
| |
| state->m_DRXK_A1_PATCH_CODE = false; |
| state->m_DRXK_A1_ROM_CODE = false; |
| state->m_DRXK_A2_ROM_CODE = false; |
| state->m_DRXK_A3_ROM_CODE = false; |
| state->m_DRXK_A2_PATCH_CODE = false; |
| state->m_DRXK_A3_PATCH_CODE = false; |
| |
| /* Init AGC and PGA parameters */ |
| /* VSB IF */ |
| state->m_vsbIfAgcCfg.ctrlMode = (ulVSBIfAgcMode); |
| state->m_vsbIfAgcCfg.outputLevel = (ulVSBIfAgcOutputLevel); |
| state->m_vsbIfAgcCfg.minOutputLevel = (ulVSBIfAgcMinLevel); |
| state->m_vsbIfAgcCfg.maxOutputLevel = (ulVSBIfAgcMaxLevel); |
| state->m_vsbIfAgcCfg.speed = (ulVSBIfAgcSpeed); |
| state->m_vsbPgaCfg = 140; |
| |
| /* VSB RF */ |
| state->m_vsbRfAgcCfg.ctrlMode = (ulVSBRfAgcMode); |
| state->m_vsbRfAgcCfg.outputLevel = (ulVSBRfAgcOutputLevel); |
| state->m_vsbRfAgcCfg.minOutputLevel = (ulVSBRfAgcMinLevel); |
| state->m_vsbRfAgcCfg.maxOutputLevel = (ulVSBRfAgcMaxLevel); |
| state->m_vsbRfAgcCfg.speed = (ulVSBRfAgcSpeed); |
| state->m_vsbRfAgcCfg.top = (ulVSBRfAgcTop); |
| state->m_vsbRfAgcCfg.cutOffCurrent = (ulVSBRfAgcCutOffCurrent); |
| state->m_vsbPreSawCfg.reference = 0x07; |
| state->m_vsbPreSawCfg.usePreSaw = true; |
| |
| state->m_Quality83percent = DEFAULT_MER_83; |
| state->m_Quality93percent = DEFAULT_MER_93; |
| if (ulQual93 <= 500 && ulQual83 < ulQual93) { |
| state->m_Quality83percent = ulQual83; |
| state->m_Quality93percent = ulQual93; |
| } |
| |
| /* ATV IF */ |
| state->m_atvIfAgcCfg.ctrlMode = (ulATVIfAgcMode); |
| state->m_atvIfAgcCfg.outputLevel = (ulATVIfAgcOutputLevel); |
| state->m_atvIfAgcCfg.minOutputLevel = (ulATVIfAgcMinLevel); |
| state->m_atvIfAgcCfg.maxOutputLevel = (ulATVIfAgcMaxLevel); |
| state->m_atvIfAgcCfg.speed = (ulATVIfAgcSpeed); |
| |
| /* ATV RF */ |
| state->m_atvRfAgcCfg.ctrlMode = (ulATVRfAgcMode); |
| state->m_atvRfAgcCfg.outputLevel = (ulATVRfAgcOutputLevel); |
| state->m_atvRfAgcCfg.minOutputLevel = (ulATVRfAgcMinLevel); |
| state->m_atvRfAgcCfg.maxOutputLevel = (ulATVRfAgcMaxLevel); |
| state->m_atvRfAgcCfg.speed = (ulATVRfAgcSpeed); |
| state->m_atvRfAgcCfg.top = (ulATVRfAgcTop); |
| state->m_atvRfAgcCfg.cutOffCurrent = (ulATVRfAgcCutOffCurrent); |
| state->m_atvPreSawCfg.reference = 0x04; |
| state->m_atvPreSawCfg.usePreSaw = true; |
| |
| |
| /* DVBT RF */ |
| state->m_dvbtRfAgcCfg.ctrlMode = DRXK_AGC_CTRL_OFF; |
| state->m_dvbtRfAgcCfg.outputLevel = 0; |
| state->m_dvbtRfAgcCfg.minOutputLevel = 0; |
| state->m_dvbtRfAgcCfg.maxOutputLevel = 0xFFFF; |
| state->m_dvbtRfAgcCfg.top = 0x2100; |
| state->m_dvbtRfAgcCfg.cutOffCurrent = 4000; |
| state->m_dvbtRfAgcCfg.speed = 1; |
| |
| |
| /* DVBT IF */ |
| state->m_dvbtIfAgcCfg.ctrlMode = DRXK_AGC_CTRL_AUTO; |
| state->m_dvbtIfAgcCfg.outputLevel = 0; |
| state->m_dvbtIfAgcCfg.minOutputLevel = 0; |
| state->m_dvbtIfAgcCfg.maxOutputLevel = 9000; |
| state->m_dvbtIfAgcCfg.top = 13424; |
| state->m_dvbtIfAgcCfg.cutOffCurrent = 0; |
| state->m_dvbtIfAgcCfg.speed = 3; |
| state->m_dvbtIfAgcCfg.FastClipCtrlDelay = 30; |
| state->m_dvbtIfAgcCfg.IngainTgtMax = 30000; |
| /* state->m_dvbtPgaCfg = 140; */ |
| |
| state->m_dvbtPreSawCfg.reference = 4; |
| state->m_dvbtPreSawCfg.usePreSaw = false; |
| |
| /* QAM RF */ |
| state->m_qamRfAgcCfg.ctrlMode = DRXK_AGC_CTRL_OFF; |
| state->m_qamRfAgcCfg.outputLevel = 0; |
| state->m_qamRfAgcCfg.minOutputLevel = 6023; |
| state->m_qamRfAgcCfg.maxOutputLevel = 27000; |
| state->m_qamRfAgcCfg.top = 0x2380; |
| state->m_qamRfAgcCfg.cutOffCurrent = 4000; |
| state->m_qamRfAgcCfg.speed = 3; |
| |
| /* QAM IF */ |
| state->m_qamIfAgcCfg.ctrlMode = DRXK_AGC_CTRL_AUTO; |
| state->m_qamIfAgcCfg.outputLevel = 0; |
| state->m_qamIfAgcCfg.minOutputLevel = 0; |
| state->m_qamIfAgcCfg.maxOutputLevel = 9000; |
| state->m_qamIfAgcCfg.top = 0x0511; |
| state->m_qamIfAgcCfg.cutOffCurrent = 0; |
| state->m_qamIfAgcCfg.speed = 3; |
| state->m_qamIfAgcCfg.IngainTgtMax = 5119; |
| state->m_qamIfAgcCfg.FastClipCtrlDelay = 50; |
| |
| state->m_qamPgaCfg = 140; |
| state->m_qamPreSawCfg.reference = 4; |
| state->m_qamPreSawCfg.usePreSaw = false; |
| |
| state->m_OperationMode = OM_NONE; |
| state->m_DrxkState = DRXK_UNINITIALIZED; |
| |
| /* MPEG output configuration */ |
| state->m_enableMPEGOutput = true; /* If TRUE; enable MPEG ouput */ |
| state->m_insertRSByte = false; /* If TRUE; insert RS byte */ |
| state->m_invertDATA = false; /* If TRUE; invert DATA signals */ |
| state->m_invertERR = false; /* If TRUE; invert ERR signal */ |
| state->m_invertSTR = false; /* If TRUE; invert STR signals */ |
| state->m_invertVAL = false; /* If TRUE; invert VAL signals */ |
| state->m_invertCLK = (ulInvertTSClock != 0); /* If TRUE; invert CLK signals */ |
| |
| /* If TRUE; static MPEG clockrate will be used; |
| otherwise clockrate will adapt to the bitrate of the TS */ |
| |
| state->m_DVBTBitrate = ulDVBTBitrate; |
| state->m_DVBCBitrate = ulDVBCBitrate; |
| |
| state->m_TSDataStrength = (ulTSDataStrength & 0x07); |
| |
| /* Maximum bitrate in b/s in case static clockrate is selected */ |
| state->m_mpegTsStaticBitrate = 19392658; |
| state->m_disableTEIhandling = false; |
| |
| if (ulInsertRSByte) |
| state->m_insertRSByte = true; |
| |
| state->m_MpegLockTimeOut = DEFAULT_DRXK_MPEG_LOCK_TIMEOUT; |
| if (ulMpegLockTimeOut < 10000) |
| state->m_MpegLockTimeOut = ulMpegLockTimeOut; |
| state->m_DemodLockTimeOut = DEFAULT_DRXK_DEMOD_LOCK_TIMEOUT; |
| if (ulDemodLockTimeOut < 10000) |
| state->m_DemodLockTimeOut = ulDemodLockTimeOut; |
| |
| /* QAM defaults */ |
| state->m_Constellation = DRX_CONSTELLATION_AUTO; |
| state->m_qamInterleaveMode = DRXK_QAM_I12_J17; |
| state->m_fecRsPlen = 204 * 8; /* fecRsPlen annex A */ |
| state->m_fecRsPrescale = 1; |
| |
| state->m_sqiSpeed = DRXK_DVBT_SQI_SPEED_MEDIUM; |
| state->m_agcFastClipCtrlDelay = 0; |
| |
| state->m_GPIOCfg = (ulGPIOCfg); |
| |
| state->m_bPowerDown = false; |
| state->m_currentPowerMode = DRX_POWER_DOWN; |
| |
| state->m_rfmirror = (ulRfMirror == 0); |
| state->m_IfAgcPol = false; |
| return 0; |
| } |
| |
| static int DRXX_Open(struct drxk_state *state) |
| { |
| int status = 0; |
| u32 jtag = 0; |
| u16 bid = 0; |
| u16 key = 0; |
| |
| dprintk(1, "\n"); |
| /* stop lock indicator process */ |
| status = write16(state, SCU_RAM_GPIO__A, SCU_RAM_GPIO_HW_LOCK_IND_DISABLE); |
| if (status < 0) |
| goto error; |
| /* Check device id */ |
| status = read16(state, SIO_TOP_COMM_KEY__A, &key); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_TOP_COMM_KEY__A, SIO_TOP_COMM_KEY_KEY); |
| if (status < 0) |
| goto error; |
| status = read32(state, SIO_TOP_JTAGID_LO__A, &jtag); |
| if (status < 0) |
| goto error; |
| status = read16(state, SIO_PDR_UIO_IN_HI__A, &bid); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_TOP_COMM_KEY__A, key); |
| error: |
| if (status < 0) |
| printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); |
| return status; |
| } |
| |
| static int GetDeviceCapabilities(struct drxk_state *state) |
| { |
| u16 sioPdrOhwCfg = 0; |
| u32 sioTopJtagidLo = 0; |
| int status; |
| const char *spin = ""; |
| |
| dprintk(1, "\n"); |
| |
| /* driver 0.9.0 */ |
| /* stop lock indicator process */ |
| status = write16(state, SCU_RAM_GPIO__A, SCU_RAM_GPIO_HW_LOCK_IND_DISABLE); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_TOP_COMM_KEY__A, 0xFABA); |
| if (status < 0) |
| goto error; |
| status = read16(state, SIO_PDR_OHW_CFG__A, &sioPdrOhwCfg); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_TOP_COMM_KEY__A, 0x0000); |
| if (status < 0) |
| goto error; |
| |
| switch ((sioPdrOhwCfg & SIO_PDR_OHW_CFG_FREF_SEL__M)) { |
| case 0: |
| /* ignore (bypass ?) */ |
| break; |
| case 1: |
| /* 27 MHz */ |
| state->m_oscClockFreq = 27000; |
| break; |
| case 2: |
| /* 20.25 MHz */ |
| state->m_oscClockFreq = 20250; |
| break; |
| case 3: |
| /* 4 MHz */ |
| state->m_oscClockFreq = 20250; |
| break; |
| default: |
| printk(KERN_ERR "drxk: Clock Frequency is unkonwn\n"); |
| return -EINVAL; |
| } |
| /* |
| Determine device capabilities |
| Based on pinning v14 |
| */ |
| status = read32(state, SIO_TOP_JTAGID_LO__A, &sioTopJtagidLo); |
| if (status < 0) |
| goto error; |
| |
| printk(KERN_ERR "drxk: status = 0x%08x\n", sioTopJtagidLo); |
| |
| /* driver 0.9.0 */ |
| switch ((sioTopJtagidLo >> 29) & 0xF) { |
| case 0: |
| state->m_deviceSpin = DRXK_SPIN_A1; |
| spin = "A1"; |
| break; |
| case 2: |
| state->m_deviceSpin = DRXK_SPIN_A2; |
| spin = "A2"; |
| break; |
| case 3: |
| state->m_deviceSpin = DRXK_SPIN_A3; |
| spin = "A3"; |
| break; |
| default: |
| state->m_deviceSpin = DRXK_SPIN_UNKNOWN; |
| status = -EINVAL; |
| printk(KERN_ERR "drxk: Spin %d unknown\n", |
| (sioTopJtagidLo >> 29) & 0xF); |
| goto error2; |
| } |
| switch ((sioTopJtagidLo >> 12) & 0xFF) { |
| case 0x13: |
| /* typeId = DRX3913K_TYPE_ID */ |
| state->m_hasLNA = false; |
| state->m_hasOOB = false; |
| state->m_hasATV = false; |
| state->m_hasAudio = false; |
| state->m_hasDVBT = true; |
| state->m_hasDVBC = true; |
| state->m_hasSAWSW = true; |
| state->m_hasGPIO2 = false; |
| state->m_hasGPIO1 = false; |
| state->m_hasIRQN = false; |
| break; |
| case 0x15: |
| /* typeId = DRX3915K_TYPE_ID */ |
| state->m_hasLNA = false; |
| state->m_hasOOB = false; |
| state->m_hasATV = true; |
| state->m_hasAudio = false; |
| state->m_hasDVBT = true; |
| state->m_hasDVBC = false; |
| state->m_hasSAWSW = true; |
| state->m_hasGPIO2 = true; |
| state->m_hasGPIO1 = true; |
| state->m_hasIRQN = false; |
| break; |
| case 0x16: |
| /* typeId = DRX3916K_TYPE_ID */ |
| state->m_hasLNA = false; |
| state->m_hasOOB = false; |
| state->m_hasATV = true; |
| state->m_hasAudio = false; |
| state->m_hasDVBT = true; |
| state->m_hasDVBC = false; |
| state->m_hasSAWSW = true; |
| state->m_hasGPIO2 = true; |
| state->m_hasGPIO1 = true; |
| state->m_hasIRQN = false; |
| break; |
| case 0x18: |
| /* typeId = DRX3918K_TYPE_ID */ |
| state->m_hasLNA = false; |
| state->m_hasOOB = false; |
| state->m_hasATV = true; |
| state->m_hasAudio = true; |
| state->m_hasDVBT = true; |
| state->m_hasDVBC = false; |
| state->m_hasSAWSW = true; |
| state->m_hasGPIO2 = true; |
| state->m_hasGPIO1 = true; |
| state->m_hasIRQN = false; |
| break; |
| case 0x21: |
| /* typeId = DRX3921K_TYPE_ID */ |
| state->m_hasLNA = false; |
| state->m_hasOOB = false; |
| state->m_hasATV = true; |
| state->m_hasAudio = true; |
| state->m_hasDVBT = true; |
| state->m_hasDVBC = true; |
| state->m_hasSAWSW = true; |
| state->m_hasGPIO2 = true; |
| state->m_hasGPIO1 = true; |
| state->m_hasIRQN = false; |
| break; |
| case 0x23: |
| /* typeId = DRX3923K_TYPE_ID */ |
| state->m_hasLNA = false; |
| state->m_hasOOB = false; |
| state->m_hasATV = true; |
| state->m_hasAudio = true; |
| state->m_hasDVBT = true; |
| state->m_hasDVBC = true; |
| state->m_hasSAWSW = true; |
| state->m_hasGPIO2 = true; |
| state->m_hasGPIO1 = true; |
| state->m_hasIRQN = false; |
| break; |
| case 0x25: |
| /* typeId = DRX3925K_TYPE_ID */ |
| state->m_hasLNA = false; |
| state->m_hasOOB = false; |
| state->m_hasATV = true; |
| state->m_hasAudio = true; |
| state->m_hasDVBT = true; |
| state->m_hasDVBC = true; |
| state->m_hasSAWSW = true; |
| state->m_hasGPIO2 = true; |
| state->m_hasGPIO1 = true; |
| state->m_hasIRQN = false; |
| break; |
| case 0x26: |
| /* typeId = DRX3926K_TYPE_ID */ |
| state->m_hasLNA = false; |
| state->m_hasOOB = false; |
| state->m_hasATV = true; |
| state->m_hasAudio = false; |
| state->m_hasDVBT = true; |
| state->m_hasDVBC = true; |
| state->m_hasSAWSW = true; |
| state->m_hasGPIO2 = true; |
| state->m_hasGPIO1 = true; |
| state->m_hasIRQN = false; |
| break; |
| default: |
| printk(KERN_ERR "drxk: DeviceID 0x%02x not supported\n", |
| ((sioTopJtagidLo >> 12) & 0xFF)); |
| status = -EINVAL; |
| goto error2; |
| } |
| |
| printk(KERN_INFO |
| "drxk: detected a drx-39%02xk, spin %s, xtal %d.%03d MHz\n", |
| ((sioTopJtagidLo >> 12) & 0xFF), spin, |
| state->m_oscClockFreq / 1000, |
| state->m_oscClockFreq % 1000); |
| |
| error: |
| if (status < 0) |
| printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); |
| |
| error2: |
| return status; |
| } |
| |
| static int HI_Command(struct drxk_state *state, u16 cmd, u16 *pResult) |
| { |
| int status; |
| bool powerdown_cmd; |
| |
| dprintk(1, "\n"); |
| |
| /* Write command */ |
| status = write16(state, SIO_HI_RA_RAM_CMD__A, cmd); |
| if (status < 0) |
| goto error; |
| if (cmd == SIO_HI_RA_RAM_CMD_RESET) |
| msleep(1); |
| |
| powerdown_cmd = |
| (bool) ((cmd == SIO_HI_RA_RAM_CMD_CONFIG) && |
| ((state->m_HICfgCtrl) & |
| SIO_HI_RA_RAM_PAR_5_CFG_SLEEP__M) == |
| SIO_HI_RA_RAM_PAR_5_CFG_SLEEP_ZZZ); |
| if (powerdown_cmd == false) { |
| /* Wait until command rdy */ |
| u32 retryCount = 0; |
| u16 waitCmd; |
| |
| do { |
| msleep(1); |
| retryCount += 1; |
| status = read16(state, SIO_HI_RA_RAM_CMD__A, |
| &waitCmd); |
| } while ((status < 0) && (retryCount < DRXK_MAX_RETRIES) |
| && (waitCmd != 0)); |
| if (status < 0) |
| goto error; |
| status = read16(state, SIO_HI_RA_RAM_RES__A, pResult); |
| } |
| error: |
| if (status < 0) |
| printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); |
| |
| return status; |
| } |
| |
| static int HI_CfgCommand(struct drxk_state *state) |
| { |
| int status; |
| |
| dprintk(1, "\n"); |
| |
| mutex_lock(&state->mutex); |
| |
| status = write16(state, SIO_HI_RA_RAM_PAR_6__A, state->m_HICfgTimeout); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_HI_RA_RAM_PAR_5__A, state->m_HICfgCtrl); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_HI_RA_RAM_PAR_4__A, state->m_HICfgWakeUpKey); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_HI_RA_RAM_PAR_3__A, state->m_HICfgBridgeDelay); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_HI_RA_RAM_PAR_2__A, state->m_HICfgTimingDiv); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_HI_RA_RAM_PAR_1__A, SIO_HI_RA_RAM_PAR_1_PAR1_SEC_KEY); |
| if (status < 0) |
| goto error; |
| status = HI_Command(state, SIO_HI_RA_RAM_CMD_CONFIG, 0); |
| if (status < 0) |
| goto error; |
| |
| state->m_HICfgCtrl &= ~SIO_HI_RA_RAM_PAR_5_CFG_SLEEP_ZZZ; |
| error: |
| mutex_unlock(&state->mutex); |
| if (status < 0) |
| printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); |
| return status; |
| } |
| |
| static int InitHI(struct drxk_state *state) |
| { |
| dprintk(1, "\n"); |
| |
| state->m_HICfgWakeUpKey = (state->demod_address << 1); |
| state->m_HICfgTimeout = 0x96FF; |
| /* port/bridge/power down ctrl */ |
| state->m_HICfgCtrl = SIO_HI_RA_RAM_PAR_5_CFG_SLV0_SLAVE; |
| |
| return HI_CfgCommand(state); |
| } |
| |
| static int MPEGTSConfigurePins(struct drxk_state *state, bool mpegEnable) |
| { |
| int status = -1; |
| u16 sioPdrMclkCfg = 0; |
| u16 sioPdrMdxCfg = 0; |
| u16 err_cfg = 0; |
| |
| dprintk(1, ": mpeg %s, %s mode\n", |
| mpegEnable ? "enable" : "disable", |
| state->m_enableParallel ? "parallel" : "serial"); |
| |
| /* stop lock indicator process */ |
| status = write16(state, SCU_RAM_GPIO__A, SCU_RAM_GPIO_HW_LOCK_IND_DISABLE); |
| if (status < 0) |
| goto error; |
| |
| /* MPEG TS pad configuration */ |
| status = write16(state, SIO_TOP_COMM_KEY__A, 0xFABA); |
| if (status < 0) |
| goto error; |
| |
| if (mpegEnable == false) { |
| /* Set MPEG TS pads to inputmode */ |
| status = write16(state, SIO_PDR_MSTRT_CFG__A, 0x0000); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_PDR_MERR_CFG__A, 0x0000); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_PDR_MCLK_CFG__A, 0x0000); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_PDR_MVAL_CFG__A, 0x0000); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_PDR_MD0_CFG__A, 0x0000); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_PDR_MD1_CFG__A, 0x0000); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_PDR_MD2_CFG__A, 0x0000); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_PDR_MD3_CFG__A, 0x0000); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_PDR_MD4_CFG__A, 0x0000); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_PDR_MD5_CFG__A, 0x0000); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_PDR_MD6_CFG__A, 0x0000); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_PDR_MD7_CFG__A, 0x0000); |
| if (status < 0) |
| goto error; |
| } else { |
| /* Enable MPEG output */ |
| sioPdrMdxCfg = |
| ((state->m_TSDataStrength << |
| SIO_PDR_MD0_CFG_DRIVE__B) | 0x0003); |
| sioPdrMclkCfg = ((state->m_TSClockkStrength << |
| SIO_PDR_MCLK_CFG_DRIVE__B) | |
| 0x0003); |
| |
| status = write16(state, SIO_PDR_MSTRT_CFG__A, sioPdrMdxCfg); |
| if (status < 0) |
| goto error; |
| |
| if (state->enable_merr_cfg) |
| err_cfg = sioPdrMdxCfg; |
| |
| status = write16(state, SIO_PDR_MERR_CFG__A, err_cfg); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_PDR_MVAL_CFG__A, err_cfg); |
| if (status < 0) |
| goto error; |
| |
| if (state->m_enableParallel == true) { |
| /* paralel -> enable MD1 to MD7 */ |
| status = write16(state, SIO_PDR_MD1_CFG__A, sioPdrMdxCfg); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_PDR_MD2_CFG__A, sioPdrMdxCfg); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_PDR_MD3_CFG__A, sioPdrMdxCfg); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_PDR_MD4_CFG__A, sioPdrMdxCfg); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_PDR_MD5_CFG__A, sioPdrMdxCfg); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_PDR_MD6_CFG__A, sioPdrMdxCfg); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_PDR_MD7_CFG__A, sioPdrMdxCfg); |
| if (status < 0) |
| goto error; |
| } else { |
| sioPdrMdxCfg = ((state->m_TSDataStrength << |
| SIO_PDR_MD0_CFG_DRIVE__B) |
| | 0x0003); |
| /* serial -> disable MD1 to MD7 */ |
| status = write16(state, SIO_PDR_MD1_CFG__A, 0x0000); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_PDR_MD2_CFG__A, 0x0000); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_PDR_MD3_CFG__A, 0x0000); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_PDR_MD4_CFG__A, 0x0000); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_PDR_MD5_CFG__A, 0x0000); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_PDR_MD6_CFG__A, 0x0000); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_PDR_MD7_CFG__A, 0x0000); |
| if (status < 0) |
| goto error; |
| } |
| status = write16(state, SIO_PDR_MCLK_CFG__A, sioPdrMclkCfg); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_PDR_MD0_CFG__A, sioPdrMdxCfg); |
| if (status < 0) |
| goto error; |
| } |
| /* Enable MB output over MPEG pads and ctl input */ |
| status = write16(state, SIO_PDR_MON_CFG__A, 0x0000); |
| if (status < 0) |
| goto error; |
| /* Write nomagic word to enable pdr reg write */ |
| status = write16(state, SIO_TOP_COMM_KEY__A, 0x0000); |
| error: |
| if (status < 0) |
| printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); |
| return status; |
| } |
| |
| static int MPEGTSDisable(struct drxk_state *state) |
| { |
| dprintk(1, "\n"); |
| |
| return MPEGTSConfigurePins(state, false); |
| } |
| |
| static int BLChainCmd(struct drxk_state *state, |
| u16 romOffset, u16 nrOfElements, u32 timeOut) |
| { |
| u16 blStatus = 0; |
| int status; |
| unsigned long end; |
| |
| dprintk(1, "\n"); |
| mutex_lock(&state->mutex); |
| status = write16(state, SIO_BL_MODE__A, SIO_BL_MODE_CHAIN); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_BL_CHAIN_ADDR__A, romOffset); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_BL_CHAIN_LEN__A, nrOfElements); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_BL_ENABLE__A, SIO_BL_ENABLE_ON); |
| if (status < 0) |
| goto error; |
| |
| end = jiffies + msecs_to_jiffies(timeOut); |
| do { |
| msleep(1); |
| status = read16(state, SIO_BL_STATUS__A, &blStatus); |
| if (status < 0) |
| goto error; |
| } while ((blStatus == 0x1) && |
| ((time_is_after_jiffies(end)))); |
| |
| if (blStatus == 0x1) { |
| printk(KERN_ERR "drxk: SIO not ready\n"); |
| status = -EINVAL; |
| goto error2; |
| } |
| error: |
| if (status < 0) |
| printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); |
| error2: |
| mutex_unlock(&state->mutex); |
| return status; |
| } |
| |
| |
| static int DownloadMicrocode(struct drxk_state *state, |
| const u8 pMCImage[], u32 Length) |
| { |
| const u8 *pSrc = pMCImage; |
| u32 Address; |
| u16 nBlocks; |
| u16 BlockSize; |
| u32 offset = 0; |
| u32 i; |
| int status = 0; |
| |
| dprintk(1, "\n"); |
| |
| /* down the drain (we don't care about MAGIC_WORD) */ |
| #if 0 |
| /* For future reference */ |
| Drain = (pSrc[0] << 8) | pSrc[1]; |
| #endif |
| pSrc += sizeof(u16); |
| offset += sizeof(u16); |
| nBlocks = (pSrc[0] << 8) | pSrc[1]; |
| pSrc += sizeof(u16); |
| offset += sizeof(u16); |
| |
| for (i = 0; i < nBlocks; i += 1) { |
| Address = (pSrc[0] << 24) | (pSrc[1] << 16) | |
| (pSrc[2] << 8) | pSrc[3]; |
| pSrc += sizeof(u32); |
| offset += sizeof(u32); |
| |
| BlockSize = ((pSrc[0] << 8) | pSrc[1]) * sizeof(u16); |
| pSrc += sizeof(u16); |
| offset += sizeof(u16); |
| |
| #if 0 |
| /* For future reference */ |
| Flags = (pSrc[0] << 8) | pSrc[1]; |
| #endif |
| pSrc += sizeof(u16); |
| offset += sizeof(u16); |
| |
| #if 0 |
| /* For future reference */ |
| BlockCRC = (pSrc[0] << 8) | pSrc[1]; |
| #endif |
| pSrc += sizeof(u16); |
| offset += sizeof(u16); |
| |
| if (offset + BlockSize > Length) { |
| printk(KERN_ERR "drxk: Firmware is corrupted.\n"); |
| return -EINVAL; |
| } |
| |
| status = write_block(state, Address, BlockSize, pSrc); |
| if (status < 0) { |
| printk(KERN_ERR "drxk: Error %d while loading firmware\n", status); |
| break; |
| } |
| pSrc += BlockSize; |
| offset += BlockSize; |
| } |
| return status; |
| } |
| |
| static int DVBTEnableOFDMTokenRing(struct drxk_state *state, bool enable) |
| { |
| int status; |
| u16 data = 0; |
| u16 desiredCtrl = SIO_OFDM_SH_OFDM_RING_ENABLE_ON; |
| u16 desiredStatus = SIO_OFDM_SH_OFDM_RING_STATUS_ENABLED; |
| unsigned long end; |
| |
| dprintk(1, "\n"); |
| |
| if (enable == false) { |
| desiredCtrl = SIO_OFDM_SH_OFDM_RING_ENABLE_OFF; |
| desiredStatus = SIO_OFDM_SH_OFDM_RING_STATUS_DOWN; |
| } |
| |
| status = read16(state, SIO_OFDM_SH_OFDM_RING_STATUS__A, &data); |
| if (status >= 0 && data == desiredStatus) { |
| /* tokenring already has correct status */ |
| return status; |
| } |
| /* Disable/enable dvbt tokenring bridge */ |
| status = write16(state, SIO_OFDM_SH_OFDM_RING_ENABLE__A, desiredCtrl); |
| |
| end = jiffies + msecs_to_jiffies(DRXK_OFDM_TR_SHUTDOWN_TIMEOUT); |
| do { |
| status = read16(state, SIO_OFDM_SH_OFDM_RING_STATUS__A, &data); |
| if ((status >= 0 && data == desiredStatus) || time_is_after_jiffies(end)) |
| break; |
| msleep(1); |
| } while (1); |
| if (data != desiredStatus) { |
| printk(KERN_ERR "drxk: SIO not ready\n"); |
| return -EINVAL; |
| } |
| return status; |
| } |
| |
| static int MPEGTSStop(struct drxk_state *state) |
| { |
| int status = 0; |
| u16 fecOcSncMode = 0; |
| u16 fecOcIprMode = 0; |
| |
| dprintk(1, "\n"); |
| |
| /* Gracefull shutdown (byte boundaries) */ |
| status = read16(state, FEC_OC_SNC_MODE__A, &fecOcSncMode); |
| if (status < 0) |
| goto error; |
| fecOcSncMode |= FEC_OC_SNC_MODE_SHUTDOWN__M; |
| status = write16(state, FEC_OC_SNC_MODE__A, fecOcSncMode); |
| if (status < 0) |
| goto error; |
| |
| /* Suppress MCLK during absence of data */ |
| status = read16(state, FEC_OC_IPR_MODE__A, &fecOcIprMode); |
| if (status < 0) |
| goto error; |
| fecOcIprMode |= FEC_OC_IPR_MODE_MCLK_DIS_DAT_ABS__M; |
| status = write16(state, FEC_OC_IPR_MODE__A, fecOcIprMode); |
| |
| error: |
| if (status < 0) |
| printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); |
| |
| return status; |
| } |
| |
| static int scu_command(struct drxk_state *state, |
| u16 cmd, u8 parameterLen, |
| u16 *parameter, u8 resultLen, u16 *result) |
| { |
| #if (SCU_RAM_PARAM_0__A - SCU_RAM_PARAM_15__A) != 15 |
| #error DRXK register mapping no longer compatible with this routine! |
| #endif |
| u16 curCmd = 0; |
| int status = -EINVAL; |
| unsigned long end; |
| u8 buffer[34]; |
| int cnt = 0, ii; |
| const char *p; |
| char errname[30]; |
| |
| dprintk(1, "\n"); |
| |
| if ((cmd == 0) || ((parameterLen > 0) && (parameter == NULL)) || |
| ((resultLen > 0) && (result == NULL))) { |
| printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); |
| return status; |
| } |
| |
| mutex_lock(&state->mutex); |
| |
| /* assume that the command register is ready |
| since it is checked afterwards */ |
| for (ii = parameterLen - 1; ii >= 0; ii -= 1) { |
| buffer[cnt++] = (parameter[ii] & 0xFF); |
| buffer[cnt++] = ((parameter[ii] >> 8) & 0xFF); |
| } |
| buffer[cnt++] = (cmd & 0xFF); |
| buffer[cnt++] = ((cmd >> 8) & 0xFF); |
| |
| write_block(state, SCU_RAM_PARAM_0__A - |
| (parameterLen - 1), cnt, buffer); |
| /* Wait until SCU has processed command */ |
| end = jiffies + msecs_to_jiffies(DRXK_MAX_WAITTIME); |
| do { |
| msleep(1); |
| status = read16(state, SCU_RAM_COMMAND__A, &curCmd); |
| if (status < 0) |
| goto error; |
| } while (!(curCmd == DRX_SCU_READY) && (time_is_after_jiffies(end))); |
| if (curCmd != DRX_SCU_READY) { |
| printk(KERN_ERR "drxk: SCU not ready\n"); |
| status = -EIO; |
| goto error2; |
| } |
| /* read results */ |
| if ((resultLen > 0) && (result != NULL)) { |
| s16 err; |
| int ii; |
| |
| for (ii = resultLen - 1; ii >= 0; ii -= 1) { |
| status = read16(state, SCU_RAM_PARAM_0__A - ii, &result[ii]); |
| if (status < 0) |
| goto error; |
| } |
| |
| /* Check if an error was reported by SCU */ |
| err = (s16)result[0]; |
| if (err >= 0) |
| goto error; |
| |
| /* check for the known error codes */ |
| switch (err) { |
| case SCU_RESULT_UNKCMD: |
| p = "SCU_RESULT_UNKCMD"; |
| break; |
| case SCU_RESULT_UNKSTD: |
| p = "SCU_RESULT_UNKSTD"; |
| break; |
| case SCU_RESULT_SIZE: |
| p = "SCU_RESULT_SIZE"; |
| break; |
| case SCU_RESULT_INVPAR: |
| p = "SCU_RESULT_INVPAR"; |
| break; |
| default: /* Other negative values are errors */ |
| sprintf(errname, "ERROR: %d\n", err); |
| p = errname; |
| } |
| printk(KERN_ERR "drxk: %s while sending cmd 0x%04x with params:", p, cmd); |
| print_hex_dump_bytes("drxk: ", DUMP_PREFIX_NONE, buffer, cnt); |
| status = -EINVAL; |
| goto error2; |
| } |
| |
| error: |
| if (status < 0) |
| printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); |
| error2: |
| mutex_unlock(&state->mutex); |
| return status; |
| } |
| |
| static int SetIqmAf(struct drxk_state *state, bool active) |
| { |
| u16 data = 0; |
| int status; |
| |
| dprintk(1, "\n"); |
| |
| /* Configure IQM */ |
| status = read16(state, IQM_AF_STDBY__A, &data); |
| if (status < 0) |
| goto error; |
| |
| if (!active) { |
| data |= (IQM_AF_STDBY_STDBY_ADC_STANDBY |
| | IQM_AF_STDBY_STDBY_AMP_STANDBY |
| | IQM_AF_STDBY_STDBY_PD_STANDBY |
| | IQM_AF_STDBY_STDBY_TAGC_IF_STANDBY |
| | IQM_AF_STDBY_STDBY_TAGC_RF_STANDBY); |
| } else { |
| data &= ((~IQM_AF_STDBY_STDBY_ADC_STANDBY) |
| & (~IQM_AF_STDBY_STDBY_AMP_STANDBY) |
| & (~IQM_AF_STDBY_STDBY_PD_STANDBY) |
| & (~IQM_AF_STDBY_STDBY_TAGC_IF_STANDBY) |
| & (~IQM_AF_STDBY_STDBY_TAGC_RF_STANDBY) |
| ); |
| } |
| status = write16(state, IQM_AF_STDBY__A, data); |
| |
| error: |
| if (status < 0) |
| printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); |
| return status; |
| } |
| |
| static int CtrlPowerMode(struct drxk_state *state, enum DRXPowerMode *mode) |
| { |
| int status = 0; |
| u16 sioCcPwdMode = 0; |
| |
| dprintk(1, "\n"); |
| |
| /* Check arguments */ |
| if (mode == NULL) |
| return -EINVAL; |
| |
| switch (*mode) { |
| case DRX_POWER_UP: |
| sioCcPwdMode = SIO_CC_PWD_MODE_LEVEL_NONE; |
| break; |
| case DRXK_POWER_DOWN_OFDM: |
| sioCcPwdMode = SIO_CC_PWD_MODE_LEVEL_OFDM; |
| break; |
| case DRXK_POWER_DOWN_CORE: |
| sioCcPwdMode = SIO_CC_PWD_MODE_LEVEL_CLOCK; |
| break; |
| case DRXK_POWER_DOWN_PLL: |
| sioCcPwdMode = SIO_CC_PWD_MODE_LEVEL_PLL; |
| break; |
| case DRX_POWER_DOWN: |
| sioCcPwdMode = SIO_CC_PWD_MODE_LEVEL_OSC; |
| break; |
| default: |
| /* Unknow sleep mode */ |
| return -EINVAL; |
| } |
| |
| /* If already in requested power mode, do nothing */ |
| if (state->m_currentPowerMode == *mode) |
| return 0; |
| |
| /* For next steps make sure to start from DRX_POWER_UP mode */ |
| if (state->m_currentPowerMode != DRX_POWER_UP) { |
| status = PowerUpDevice(state); |
| if (status < 0) |
| goto error; |
| status = DVBTEnableOFDMTokenRing(state, true); |
| if (status < 0) |
| goto error; |
| } |
| |
| if (*mode == DRX_POWER_UP) { |
| /* Restore analog & pin configuartion */ |
| } else { |
| /* Power down to requested mode */ |
| /* Backup some register settings */ |
| /* Set pins with possible pull-ups connected |
| to them in input mode */ |
| /* Analog power down */ |
| /* ADC power down */ |
| /* Power down device */ |
| /* stop all comm_exec */ |
| /* Stop and power down previous standard */ |
| switch (state->m_OperationMode) { |
| case OM_DVBT: |
| status = MPEGTSStop(state); |
| if (status < 0) |
| goto error; |
| status = PowerDownDVBT(state, false); |
| if (status < 0) |
| goto error; |
| break; |
| case OM_QAM_ITU_A: |
| case OM_QAM_ITU_C: |
| status = MPEGTSStop(state); |
| if (status < 0) |
| goto error; |
| status = PowerDownQAM(state); |
| if (status < 0) |
| goto error; |
| break; |
| default: |
| break; |
| } |
| status = DVBTEnableOFDMTokenRing(state, false); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_CC_PWD_MODE__A, sioCcPwdMode); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_CC_UPDATE__A, SIO_CC_UPDATE_KEY); |
| if (status < 0) |
| goto error; |
| |
| if (*mode != DRXK_POWER_DOWN_OFDM) { |
| state->m_HICfgCtrl |= |
| SIO_HI_RA_RAM_PAR_5_CFG_SLEEP_ZZZ; |
| status = HI_CfgCommand(state); |
| if (status < 0) |
| goto error; |
| } |
| } |
| state->m_currentPowerMode = *mode; |
| |
| error: |
| if (status < 0) |
| printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); |
| |
| return status; |
| } |
| |
| static int PowerDownDVBT(struct drxk_state *state, bool setPowerMode) |
| { |
| enum DRXPowerMode powerMode = DRXK_POWER_DOWN_OFDM; |
| u16 cmdResult = 0; |
| u16 data = 0; |
| int status; |
| |
| dprintk(1, "\n"); |
| |
| status = read16(state, SCU_COMM_EXEC__A, &data); |
| if (status < 0) |
| goto error; |
| if (data == SCU_COMM_EXEC_ACTIVE) { |
| /* Send OFDM stop command */ |
| status = scu_command(state, SCU_RAM_COMMAND_STANDARD_OFDM | SCU_RAM_COMMAND_CMD_DEMOD_STOP, 0, NULL, 1, &cmdResult); |
| if (status < 0) |
| goto error; |
| /* Send OFDM reset command */ |
| status = scu_command(state, SCU_RAM_COMMAND_STANDARD_OFDM | SCU_RAM_COMMAND_CMD_DEMOD_RESET, 0, NULL, 1, &cmdResult); |
| if (status < 0) |
| goto error; |
| } |
| |
| /* Reset datapath for OFDM, processors first */ |
| status = write16(state, OFDM_SC_COMM_EXEC__A, OFDM_SC_COMM_EXEC_STOP); |
| if (status < 0) |
| goto error; |
| status = write16(state, OFDM_LC_COMM_EXEC__A, OFDM_LC_COMM_EXEC_STOP); |
| if (status < 0) |
| goto error; |
| status = write16(state, IQM_COMM_EXEC__A, IQM_COMM_EXEC_B_STOP); |
| if (status < 0) |
| goto error; |
| |
| /* powerdown AFE */ |
| status = SetIqmAf(state, false); |
| if (status < 0) |
| goto error; |
| |
| /* powerdown to OFDM mode */ |
| if (setPowerMode) { |
| status = CtrlPowerMode(state, &powerMode); |
| if (status < 0) |
| goto error; |
| } |
| error: |
| if (status < 0) |
| printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); |
| return status; |
| } |
| |
| static int SetOperationMode(struct drxk_state *state, |
| enum OperationMode oMode) |
| { |
| int status = 0; |
| |
| dprintk(1, "\n"); |
| /* |
| Stop and power down previous standard |
| TODO investigate total power down instead of partial |
| power down depending on "previous" standard. |
| */ |
| |
| /* disable HW lock indicator */ |
| status = write16(state, SCU_RAM_GPIO__A, SCU_RAM_GPIO_HW_LOCK_IND_DISABLE); |
| if (status < 0) |
| goto error; |
| |
| /* Device is already at the required mode */ |
| if (state->m_OperationMode == oMode) |
| return 0; |
| |
| switch (state->m_OperationMode) { |
| /* OM_NONE was added for start up */ |
| case OM_NONE: |
| break; |
| case OM_DVBT: |
| status = MPEGTSStop(state); |
| if (status < 0) |
| goto error; |
| status = PowerDownDVBT(state, true); |
| if (status < 0) |
| goto error; |
| state->m_OperationMode = OM_NONE; |
| break; |
| case OM_QAM_ITU_A: /* fallthrough */ |
| case OM_QAM_ITU_C: |
| status = MPEGTSStop(state); |
| if (status < 0) |
| goto error; |
| status = PowerDownQAM(state); |
| if (status < 0) |
| goto error; |
| state->m_OperationMode = OM_NONE; |
| break; |
| case OM_QAM_ITU_B: |
| default: |
| status = -EINVAL; |
| goto error; |
| } |
| |
| /* |
| Power up new standard |
| */ |
| switch (oMode) { |
| case OM_DVBT: |
| dprintk(1, ": DVB-T\n"); |
| state->m_OperationMode = oMode; |
| status = SetDVBTStandard(state, oMode); |
| if (status < 0) |
| goto error; |
| break; |
| case OM_QAM_ITU_A: /* fallthrough */ |
| case OM_QAM_ITU_C: |
| dprintk(1, ": DVB-C Annex %c\n", |
| (state->m_OperationMode == OM_QAM_ITU_A) ? 'A' : 'C'); |
| state->m_OperationMode = oMode; |
| status = SetQAMStandard(state, oMode); |
| if (status < 0) |
| goto error; |
| break; |
| case OM_QAM_ITU_B: |
| default: |
| status = -EINVAL; |
| } |
| error: |
| if (status < 0) |
| printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); |
| return status; |
| } |
| |
| static int Start(struct drxk_state *state, s32 offsetFreq, |
| s32 IntermediateFrequency) |
| { |
| int status = -EINVAL; |
| |
| u16 IFreqkHz; |
| s32 OffsetkHz = offsetFreq / 1000; |
| |
| dprintk(1, "\n"); |
| if (state->m_DrxkState != DRXK_STOPPED && |
| state->m_DrxkState != DRXK_DTV_STARTED) |
| goto error; |
| |
| state->m_bMirrorFreqSpect = (state->props.inversion == INVERSION_ON); |
| |
| if (IntermediateFrequency < 0) { |
| state->m_bMirrorFreqSpect = !state->m_bMirrorFreqSpect; |
| IntermediateFrequency = -IntermediateFrequency; |
| } |
| |
| switch (state->m_OperationMode) { |
| case OM_QAM_ITU_A: |
| case OM_QAM_ITU_C: |
| IFreqkHz = (IntermediateFrequency / 1000); |
| status = SetQAM(state, IFreqkHz, OffsetkHz); |
| if (status < 0) |
| goto error; |
| state->m_DrxkState = DRXK_DTV_STARTED; |
| break; |
| case OM_DVBT: |
| IFreqkHz = (IntermediateFrequency / 1000); |
| status = MPEGTSStop(state); |
| if (status < 0) |
| goto error; |
| status = SetDVBT(state, IFreqkHz, OffsetkHz); |
| if (status < 0) |
| goto error; |
| status = DVBTStart(state); |
| if (status < 0) |
| goto error; |
| state->m_DrxkState = DRXK_DTV_STARTED; |
| break; |
| default: |
| break; |
| } |
| error: |
| if (status < 0) |
| printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); |
| return status; |
| } |
| |
| static int ShutDown(struct drxk_state *state) |
| { |
| dprintk(1, "\n"); |
| |
| MPEGTSStop(state); |
| return 0; |
| } |
| |
| static int GetLockStatus(struct drxk_state *state, u32 *pLockStatus, |
| u32 Time) |
| { |
| int status = -EINVAL; |
| |
| dprintk(1, "\n"); |
| |
| if (pLockStatus == NULL) |
| goto error; |
| |
| *pLockStatus = NOT_LOCKED; |
| |
| /* define the SCU command code */ |
| switch (state->m_OperationMode) { |
| case OM_QAM_ITU_A: |
| case OM_QAM_ITU_B: |
| case OM_QAM_ITU_C: |
| status = GetQAMLockStatus(state, pLockStatus); |
| break; |
| case OM_DVBT: |
| status = GetDVBTLockStatus(state, pLockStatus); |
| break; |
| default: |
| break; |
| } |
| error: |
| if (status < 0) |
| printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); |
| return status; |
| } |
| |
| static int MPEGTSStart(struct drxk_state *state) |
| { |
| int status; |
| |
| u16 fecOcSncMode = 0; |
| |
| /* Allow OC to sync again */ |
| status = read16(state, FEC_OC_SNC_MODE__A, &fecOcSncMode); |
| if (status < 0) |
| goto error; |
| fecOcSncMode &= ~FEC_OC_SNC_MODE_SHUTDOWN__M; |
| status = write16(state, FEC_OC_SNC_MODE__A, fecOcSncMode); |
| if (status < 0) |
| goto error; |
| status = write16(state, FEC_OC_SNC_UNLOCK__A, 1); |
| error: |
| if (status < 0) |
| printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); |
| return status; |
| } |
| |
| static int MPEGTSDtoInit(struct drxk_state *state) |
| { |
| int status; |
| |
| dprintk(1, "\n"); |
| |
| /* Rate integration settings */ |
| status = write16(state, FEC_OC_RCN_CTL_STEP_LO__A, 0x0000); |
| if (status < 0) |
| goto error; |
| status = write16(state, FEC_OC_RCN_CTL_STEP_HI__A, 0x000C); |
| if (status < 0) |
| goto error; |
| status = write16(state, FEC_OC_RCN_GAIN__A, 0x000A); |
| if (status < 0) |
| goto error; |
| status = write16(state, FEC_OC_AVR_PARM_A__A, 0x0008); |
| if (status < 0) |
| goto error; |
| status = write16(state, FEC_OC_AVR_PARM_B__A, 0x0006); |
| if (status < 0) |
| goto error; |
| status = write16(state, FEC_OC_TMD_HI_MARGIN__A, 0x0680); |
| if (status < 0) |
| goto error; |
| status = write16(state, FEC_OC_TMD_LO_MARGIN__A, 0x0080); |
| if (status < 0) |
| goto error; |
| status = write16(state, FEC_OC_TMD_COUNT__A, 0x03F4); |
| if (status < 0) |
| goto error; |
| |
| /* Additional configuration */ |
| status = write16(state, FEC_OC_OCR_INVERT__A, 0); |
| if (status < 0) |
| goto error; |
| status = write16(state, FEC_OC_SNC_LWM__A, 2); |
| if (status < 0) |
| goto error; |
| status = write16(state, FEC_OC_SNC_HWM__A, 12); |
| error: |
| if (status < 0) |
| printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); |
| |
| return status; |
| } |
| |
| static int MPEGTSDtoSetup(struct drxk_state *state, |
| enum OperationMode oMode) |
| { |
| int status; |
| |
| u16 fecOcRegMode = 0; /* FEC_OC_MODE register value */ |
| u16 fecOcRegIprMode = 0; /* FEC_OC_IPR_MODE register value */ |
| u16 fecOcDtoMode = 0; /* FEC_OC_IPR_INVERT register value */ |
| u16 fecOcFctMode = 0; /* FEC_OC_IPR_INVERT register value */ |
| u16 fecOcDtoPeriod = 2; /* FEC_OC_IPR_INVERT register value */ |
| u16 fecOcDtoBurstLen = 188; /* FEC_OC_IPR_INVERT register value */ |
| u32 fecOcRcnCtlRate = 0; /* FEC_OC_IPR_INVERT register value */ |
| u16 fecOcTmdMode = 0; |
| u16 fecOcTmdIntUpdRate = 0; |
| u32 maxBitRate = 0; |
| bool staticCLK = false; |
| |
| dprintk(1, "\n"); |
| |
| /* Check insertion of the Reed-Solomon parity bytes */ |
| status = read16(state, FEC_OC_MODE__A, &fecOcRegMode); |
| if (status < 0) |
| goto error; |
| status = read16(state, FEC_OC_IPR_MODE__A, &fecOcRegIprMode); |
| if (status < 0) |
| goto error; |
| fecOcRegMode &= (~FEC_OC_MODE_PARITY__M); |
| fecOcRegIprMode &= (~FEC_OC_IPR_MODE_MVAL_DIS_PAR__M); |
| if (state->m_insertRSByte == true) { |
| /* enable parity symbol forward */ |
| fecOcRegMode |= FEC_OC_MODE_PARITY__M; |
| /* MVAL disable during parity bytes */ |
| fecOcRegIprMode |= FEC_OC_IPR_MODE_MVAL_DIS_PAR__M; |
| /* TS burst length to 204 */ |
| fecOcDtoBurstLen = 204; |
| } |
| |
| /* Check serial or parrallel output */ |
| fecOcRegIprMode &= (~(FEC_OC_IPR_MODE_SERIAL__M)); |
| if (state->m_enableParallel == false) { |
| /* MPEG data output is serial -> set ipr_mode[0] */ |
| fecOcRegIprMode |= FEC_OC_IPR_MODE_SERIAL__M; |
| } |
| |
| switch (oMode) { |
| case OM_DVBT: |
| maxBitRate = state->m_DVBTBitrate; |
| fecOcTmdMode = 3; |
| fecOcRcnCtlRate = 0xC00000; |
| staticCLK = state->m_DVBTStaticCLK; |
| break; |
| case OM_QAM_ITU_A: /* fallthrough */ |
| case OM_QAM_ITU_C: |
| fecOcTmdMode = 0x0004; |
| fecOcRcnCtlRate = 0xD2B4EE; /* good for >63 Mb/s */ |
| maxBitRate = state->m_DVBCBitrate; |
| staticCLK = state->m_DVBCStaticCLK; |
| break; |
| default: |
| status = -EINVAL; |
| } /* switch (standard) */ |
| if (status < 0) |
| goto error; |
| |
| /* Configure DTO's */ |
| if (staticCLK) { |
| u32 bitRate = 0; |
| |
| /* Rational DTO for MCLK source (static MCLK rate), |
| Dynamic DTO for optimal grouping |
| (avoid intra-packet gaps), |
| DTO offset enable to sync TS burst with MSTRT */ |
| fecOcDtoMode = (FEC_OC_DTO_MODE_DYNAMIC__M | |
| FEC_OC_DTO_MODE_OFFSET_ENABLE__M); |
| fecOcFctMode = (FEC_OC_FCT_MODE_RAT_ENA__M | |
| FEC_OC_FCT_MODE_VIRT_ENA__M); |
| |
| /* Check user defined bitrate */ |
| bitRate = maxBitRate; |
| if (bitRate > 75900000UL) { /* max is 75.9 Mb/s */ |
| bitRate = 75900000UL; |
| } |
| /* Rational DTO period: |
| dto_period = (Fsys / bitrate) - 2 |
| |
| Result should be floored, |
| to make sure >= requested bitrate |
| */ |
| fecOcDtoPeriod = (u16) (((state->m_sysClockFreq) |
| * 1000) / bitRate); |
| if (fecOcDtoPeriod <= 2) |
| fecOcDtoPeriod = 0; |
| else |
| fecOcDtoPeriod -= 2; |
| fecOcTmdIntUpdRate = 8; |
| } else { |
| /* (commonAttr->staticCLK == false) => dynamic mode */ |
| fecOcDtoMode = FEC_OC_DTO_MODE_DYNAMIC__M; |
| fecOcFctMode = FEC_OC_FCT_MODE__PRE; |
| fecOcTmdIntUpdRate = 5; |
| } |
| |
| /* Write appropriate registers with requested configuration */ |
| status = write16(state, FEC_OC_DTO_BURST_LEN__A, fecOcDtoBurstLen); |
| if (status < 0) |
| goto error; |
| status = write16(state, FEC_OC_DTO_PERIOD__A, fecOcDtoPeriod); |
| if (status < 0) |
| goto error; |
| status = write16(state, FEC_OC_DTO_MODE__A, fecOcDtoMode); |
| if (status < 0) |
| goto error; |
| status = write16(state, FEC_OC_FCT_MODE__A, fecOcFctMode); |
| if (status < 0) |
| goto error; |
| status = write16(state, FEC_OC_MODE__A, fecOcRegMode); |
| if (status < 0) |
| goto error; |
| status = write16(state, FEC_OC_IPR_MODE__A, fecOcRegIprMode); |
| if (status < 0) |
| goto error; |
| |
| /* Rate integration settings */ |
| status = write32(state, FEC_OC_RCN_CTL_RATE_LO__A, fecOcRcnCtlRate); |
| if (status < 0) |
| goto error; |
| status = write16(state, FEC_OC_TMD_INT_UPD_RATE__A, fecOcTmdIntUpdRate); |
| if (status < 0) |
| goto error; |
| status = write16(state, FEC_OC_TMD_MODE__A, fecOcTmdMode); |
| error: |
| if (status < 0) |
| printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); |
| return status; |
| } |
| |
| static int MPEGTSConfigurePolarity(struct drxk_state *state) |
| { |
| u16 fecOcRegIprInvert = 0; |
| |
| /* Data mask for the output data byte */ |
| u16 InvertDataMask = |
| FEC_OC_IPR_INVERT_MD7__M | FEC_OC_IPR_INVERT_MD6__M | |
| FEC_OC_IPR_INVERT_MD5__M | FEC_OC_IPR_INVERT_MD4__M | |
| FEC_OC_IPR_INVERT_MD3__M | FEC_OC_IPR_INVERT_MD2__M | |
| FEC_OC_IPR_INVERT_MD1__M | FEC_OC_IPR_INVERT_MD0__M; |
| |
| dprintk(1, "\n"); |
| |
| /* Control selective inversion of output bits */ |
| fecOcRegIprInvert &= (~(InvertDataMask)); |
| if (state->m_invertDATA == true) |
| fecOcRegIprInvert |= InvertDataMask; |
| fecOcRegIprInvert &= (~(FEC_OC_IPR_INVERT_MERR__M)); |
| if (state->m_invertERR == true) |
| fecOcRegIprInvert |= FEC_OC_IPR_INVERT_MERR__M; |
| fecOcRegIprInvert &= (~(FEC_OC_IPR_INVERT_MSTRT__M)); |
| if (state->m_invertSTR == true) |
| fecOcRegIprInvert |= FEC_OC_IPR_INVERT_MSTRT__M; |
| fecOcRegIprInvert &= (~(FEC_OC_IPR_INVERT_MVAL__M)); |
| if (state->m_invertVAL == true) |
| fecOcRegIprInvert |= FEC_OC_IPR_INVERT_MVAL__M; |
| fecOcRegIprInvert &= (~(FEC_OC_IPR_INVERT_MCLK__M)); |
| if (state->m_invertCLK == true) |
| fecOcRegIprInvert |= FEC_OC_IPR_INVERT_MCLK__M; |
| |
| return write16(state, FEC_OC_IPR_INVERT__A, fecOcRegIprInvert); |
| } |
| |
| #define SCU_RAM_AGC_KI_INV_RF_POL__M 0x4000 |
| |
| static int SetAgcRf(struct drxk_state *state, |
| struct SCfgAgc *pAgcCfg, bool isDTV) |
| { |
| int status = -EINVAL; |
| u16 data = 0; |
| struct SCfgAgc *pIfAgcSettings; |
| |
| dprintk(1, "\n"); |
| |
| if (pAgcCfg == NULL) |
| goto error; |
| |
| switch (pAgcCfg->ctrlMode) { |
| case DRXK_AGC_CTRL_AUTO: |
| /* Enable RF AGC DAC */ |
| status = read16(state, IQM_AF_STDBY__A, &data); |
| if (status < 0) |
| goto error; |
| data &= ~IQM_AF_STDBY_STDBY_TAGC_RF_STANDBY; |
| status = write16(state, IQM_AF_STDBY__A, data); |
| if (status < 0) |
| goto error; |
| status = read16(state, SCU_RAM_AGC_CONFIG__A, &data); |
| if (status < 0) |
| goto error; |
| |
| /* Enable SCU RF AGC loop */ |
| data &= ~SCU_RAM_AGC_CONFIG_DISABLE_RF_AGC__M; |
| |
| /* Polarity */ |
| if (state->m_RfAgcPol) |
| data |= SCU_RAM_AGC_CONFIG_INV_RF_POL__M; |
| else |
| data &= ~SCU_RAM_AGC_CONFIG_INV_RF_POL__M; |
| status = write16(state, SCU_RAM_AGC_CONFIG__A, data); |
| if (status < 0) |
| goto error; |
| |
| /* Set speed (using complementary reduction value) */ |
| status = read16(state, SCU_RAM_AGC_KI_RED__A, &data); |
| if (status < 0) |
| goto error; |
| |
| data &= ~SCU_RAM_AGC_KI_RED_RAGC_RED__M; |
| data |= (~(pAgcCfg->speed << |
| SCU_RAM_AGC_KI_RED_RAGC_RED__B) |
| & SCU_RAM_AGC_KI_RED_RAGC_RED__M); |
| |
| status = write16(state, SCU_RAM_AGC_KI_RED__A, data); |
| if (status < 0) |
| goto error; |
| |
| if (IsDVBT(state)) |
| pIfAgcSettings = &state->m_dvbtIfAgcCfg; |
| else if (IsQAM(state)) |
| pIfAgcSettings = &state->m_qamIfAgcCfg; |
| else |
| pIfAgcSettings = &state->m_atvIfAgcCfg; |
| if (pIfAgcSettings == NULL) { |
| status = -EINVAL; |
| goto error; |
| } |
| |
| /* Set TOP, only if IF-AGC is in AUTO mode */ |
| if (pIfAgcSettings->ctrlMode == DRXK_AGC_CTRL_AUTO) |
| status = write16(state, SCU_RAM_AGC_IF_IACCU_HI_TGT_MAX__A, pAgcCfg->top); |
| if (status < 0) |
| goto error; |
| |
| /* Cut-Off current */ |
| status = write16(state, SCU_RAM_AGC_RF_IACCU_HI_CO__A, pAgcCfg->cutOffCurrent); |
| if (status < 0) |
| goto error; |
| |
| /* Max. output level */ |
| status = write16(state, SCU_RAM_AGC_RF_MAX__A, pAgcCfg->maxOutputLevel); |
| if (status < 0) |
| goto error; |
| |
| break; |
| |
| case DRXK_AGC_CTRL_USER: |
| /* Enable RF AGC DAC */ |
| status = read16(state, IQM_AF_STDBY__A, &data); |
| if (status < 0) |
| goto error; |
| data &= ~IQM_AF_STDBY_STDBY_TAGC_RF_STANDBY; |
| status = write16(state, IQM_AF_STDBY__A, data); |
| if (status < 0) |
| goto error; |
| |
| /* Disable SCU RF AGC loop */ |
| status = read16(state, SCU_RAM_AGC_CONFIG__A, &data); |
| if (status < 0) |
| goto error; |
| data |= SCU_RAM_AGC_CONFIG_DISABLE_RF_AGC__M; |
| if (state->m_RfAgcPol) |
| data |= SCU_RAM_AGC_CONFIG_INV_RF_POL__M; |
| else |
| data &= ~SCU_RAM_AGC_CONFIG_INV_RF_POL__M; |
| status = write16(state, SCU_RAM_AGC_CONFIG__A, data); |
| if (status < 0) |
| goto error; |
| |
| /* SCU c.o.c. to 0, enabling full control range */ |
| status = write16(state, SCU_RAM_AGC_RF_IACCU_HI_CO__A, 0); |
| if (status < 0) |
| goto error; |
| |
| /* Write value to output pin */ |
| status = write16(state, SCU_RAM_AGC_RF_IACCU_HI__A, pAgcCfg->outputLevel); |
| if (status < 0) |
| goto error; |
| break; |
| |
| case DRXK_AGC_CTRL_OFF: |
| /* Disable RF AGC DAC */ |
| status = read16(state, IQM_AF_STDBY__A, &data); |
| if (status < 0) |
| goto error; |
| data |= IQM_AF_STDBY_STDBY_TAGC_RF_STANDBY; |
| status = write16(state, IQM_AF_STDBY__A, data); |
| if (status < 0) |
| goto error; |
| |
| /* Disable SCU RF AGC loop */ |
| status = read16(state, SCU_RAM_AGC_CONFIG__A, &data); |
| if (status < 0) |
| goto error; |
| data |= SCU_RAM_AGC_CONFIG_DISABLE_RF_AGC__M; |
| status = write16(state, SCU_RAM_AGC_CONFIG__A, data); |
| if (status < 0) |
| goto error; |
| break; |
| |
| default: |
| status = -EINVAL; |
| |
| } |
| error: |
| if (status < 0) |
| printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); |
| return status; |
| } |
| |
| #define SCU_RAM_AGC_KI_INV_IF_POL__M 0x2000 |
| |
| static int SetAgcIf(struct drxk_state *state, |
| struct SCfgAgc *pAgcCfg, bool isDTV) |
| { |
| u16 data = 0; |
| int status = 0; |
| struct SCfgAgc *pRfAgcSettings; |
| |
| dprintk(1, "\n"); |
| |
| switch (pAgcCfg->ctrlMode) { |
| case DRXK_AGC_CTRL_AUTO: |
| |
| /* Enable IF AGC DAC */ |
| status = read16(state, IQM_AF_STDBY__A, &data); |
| if (status < 0) |
| goto error; |
| data &= ~IQM_AF_STDBY_STDBY_TAGC_IF_STANDBY; |
| status = write16(state, IQM_AF_STDBY__A, data); |
| if (status < 0) |
| goto error; |
| |
| status = read16(state, SCU_RAM_AGC_CONFIG__A, &data); |
| if (status < 0) |
| goto error; |
| |
| /* Enable SCU IF AGC loop */ |
| data &= ~SCU_RAM_AGC_CONFIG_DISABLE_IF_AGC__M; |
| |
| /* Polarity */ |
| if (state->m_IfAgcPol) |
| data |= SCU_RAM_AGC_CONFIG_INV_IF_POL__M; |
| else |
| data &= ~SCU_RAM_AGC_CONFIG_INV_IF_POL__M; |
| status = write16(state, SCU_RAM_AGC_CONFIG__A, data); |
| if (status < 0) |
| goto error; |
| |
| /* Set speed (using complementary reduction value) */ |
| status = read16(state, SCU_RAM_AGC_KI_RED__A, &data); |
| if (status < 0) |
| goto error; |
| data &= ~SCU_RAM_AGC_KI_RED_IAGC_RED__M; |
| data |= (~(pAgcCfg->speed << |
| SCU_RAM_AGC_KI_RED_IAGC_RED__B) |
| & SCU_RAM_AGC_KI_RED_IAGC_RED__M); |
| |
| status = write16(state, SCU_RAM_AGC_KI_RED__A, data); |
| if (status < 0) |
| goto error; |
| |
| if (IsQAM(state)) |
| pRfAgcSettings = &state->m_qamRfAgcCfg; |
| else |
| pRfAgcSettings = &state->m_atvRfAgcCfg; |
| if (pRfAgcSettings == NULL) |
| return -1; |
| /* Restore TOP */ |
| status = write16(state, SCU_RAM_AGC_IF_IACCU_HI_TGT_MAX__A, pRfAgcSettings->top); |
| if (status < 0) |
| goto error; |
| break; |
| |
| case DRXK_AGC_CTRL_USER: |
| |
| /* Enable IF AGC DAC */ |
| status = read16(state, IQM_AF_STDBY__A, &data); |
| if (status < 0) |
| goto error; |
| data &= ~IQM_AF_STDBY_STDBY_TAGC_IF_STANDBY; |
| status = write16(state, IQM_AF_STDBY__A, data); |
| if (status < 0) |
| goto error; |
| |
| status = read16(state, SCU_RAM_AGC_CONFIG__A, &data); |
| if (status < 0) |
| goto error; |
| |
| /* Disable SCU IF AGC loop */ |
| data |= SCU_RAM_AGC_CONFIG_DISABLE_IF_AGC__M; |
| |
| /* Polarity */ |
| if (state->m_IfAgcPol) |
| data |= SCU_RAM_AGC_CONFIG_INV_IF_POL__M; |
| else |
| data &= ~SCU_RAM_AGC_CONFIG_INV_IF_POL__M; |
| status = write16(state, SCU_RAM_AGC_CONFIG__A, data); |
| if (status < 0) |
| goto error; |
| |
| /* Write value to output pin */ |
| status = write16(state, SCU_RAM_AGC_IF_IACCU_HI_TGT_MAX__A, pAgcCfg->outputLevel); |
| if (status < 0) |
| goto error; |
| break; |
| |
| case DRXK_AGC_CTRL_OFF: |
| |
| /* Disable If AGC DAC */ |
| status = read16(state, IQM_AF_STDBY__A, &data); |
| if (status < 0) |
| goto error; |
| data |= IQM_AF_STDBY_STDBY_TAGC_IF_STANDBY; |
| status = write16(state, IQM_AF_STDBY__A, data); |
| if (status < 0) |
| goto error; |
| |
| /* Disable SCU IF AGC loop */ |
| status = read16(state, SCU_RAM_AGC_CONFIG__A, &data); |
| if (status < 0) |
| goto error; |
| data |= SCU_RAM_AGC_CONFIG_DISABLE_IF_AGC__M; |
| status = write16(state, SCU_RAM_AGC_CONFIG__A, data); |
| if (status < 0) |
| goto error; |
| break; |
| } /* switch (agcSettingsIf->ctrlMode) */ |
| |
| /* always set the top to support |
| configurations without if-loop */ |
| status = write16(state, SCU_RAM_AGC_INGAIN_TGT_MIN__A, pAgcCfg->top); |
| error: |
| if (status < 0) |
| printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); |
| return status; |
| } |
| |
| static int ReadIFAgc(struct drxk_state *state, u32 *pValue) |
| { |
| u16 agcDacLvl; |
| int status; |
| u16 Level = 0; |
| |
| dprintk(1, "\n"); |
| |
| status = read16(state, IQM_AF_AGC_IF__A, &agcDacLvl); |
| if (status < 0) { |
| printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); |
| return status; |
| } |
| |
| *pValue = 0; |
| |
| if (agcDacLvl > DRXK_AGC_DAC_OFFSET) |
| Level = agcDacLvl - DRXK_AGC_DAC_OFFSET; |
| if (Level < 14000) |
| *pValue = (14000 - Level) / 4; |
| else |
| *pValue = 0; |
| |
| return status; |
| } |
| |
| static int GetQAMSignalToNoise(struct drxk_state *state, |
| s32 *pSignalToNoise) |
| { |
| int status = 0; |
| u16 qamSlErrPower = 0; /* accum. error between |
| raw and sliced symbols */ |
| u32 qamSlSigPower = 0; /* used for MER, depends of |
| QAM modulation */ |
| u32 qamSlMer = 0; /* QAM MER */ |
| |
| dprintk(1, "\n"); |
| |
| /* MER calculation */ |
| |
| /* get the register value needed for MER */ |
| status = read16(state, QAM_SL_ERR_POWER__A, &qamSlErrPower); |
| if (status < 0) { |
| printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); |
| return -EINVAL; |
| } |
| |
| switch (state->props.modulation) { |
| case QAM_16: |
| qamSlSigPower = DRXK_QAM_SL_SIG_POWER_QAM16 << 2; |
| break; |
| case QAM_32: |
| qamSlSigPower = DRXK_QAM_SL_SIG_POWER_QAM32 << 2; |
| break; |
| case QAM_64: |
| qamSlSigPower = DRXK_QAM_SL_SIG_POWER_QAM64 << 2; |
| break; |
| case QAM_128: |
| qamSlSigPower = DRXK_QAM_SL_SIG_POWER_QAM128 << 2; |
| break; |
| default: |
| case QAM_256: |
| qamSlSigPower = DRXK_QAM_SL_SIG_POWER_QAM256 << 2; |
| break; |
| } |
| |
| if (qamSlErrPower > 0) { |
| qamSlMer = Log10Times100(qamSlSigPower) - |
| Log10Times100((u32) qamSlErrPower); |
| } |
| *pSignalToNoise = qamSlMer; |
| |
| return status; |
| } |
| |
| static int GetDVBTSignalToNoise(struct drxk_state *state, |
| s32 *pSignalToNoise) |
| { |
| int status; |
| u16 regData = 0; |
| u32 EqRegTdSqrErrI = 0; |
| u32 EqRegTdSqrErrQ = 0; |
| u16 EqRegTdSqrErrExp = 0; |
| u16 EqRegTdTpsPwrOfs = 0; |
| u16 EqRegTdReqSmbCnt = 0; |
| u32 tpsCnt = 0; |
| u32 SqrErrIQ = 0; |
| u32 a = 0; |
| u32 b = 0; |
| u32 c = 0; |
| u32 iMER = 0; |
| u16 transmissionParams = 0; |
| |
| dprintk(1, "\n"); |
| |
| status = read16(state, OFDM_EQ_TOP_TD_TPS_PWR_OFS__A, &EqRegTdTpsPwrOfs); |
| if (status < 0) |
| goto error; |
| status = read16(state, OFDM_EQ_TOP_TD_REQ_SMB_CNT__A, &EqRegTdReqSmbCnt); |
| if (status < 0) |
| goto error; |
| status = read16(state, OFDM_EQ_TOP_TD_SQR_ERR_EXP__A, &EqRegTdSqrErrExp); |
| if (status < 0) |
| goto error; |
| status = read16(state, OFDM_EQ_TOP_TD_SQR_ERR_I__A, ®Data); |
| if (status < 0) |
| goto error; |
| /* Extend SQR_ERR_I operational range */ |
| EqRegTdSqrErrI = (u32) regData; |
| if ((EqRegTdSqrErrExp > 11) && |
| (EqRegTdSqrErrI < 0x00000FFFUL)) { |
| EqRegTdSqrErrI += 0x00010000UL; |
| } |
| status = read16(state, OFDM_EQ_TOP_TD_SQR_ERR_Q__A, ®Data); |
| if (status < 0) |
| goto error; |
| /* Extend SQR_ERR_Q operational range */ |
| EqRegTdSqrErrQ = (u32) regData; |
| if ((EqRegTdSqrErrExp > 11) && |
| (EqRegTdSqrErrQ < 0x00000FFFUL)) |
| EqRegTdSqrErrQ += 0x00010000UL; |
| |
| status = read16(state, OFDM_SC_RA_RAM_OP_PARAM__A, &transmissionParams); |
| if (status < 0) |
| goto error; |
| |
| /* Check input data for MER */ |
| |
| /* MER calculation (in 0.1 dB) without math.h */ |
| if ((EqRegTdTpsPwrOfs == 0) || (EqRegTdReqSmbCnt == 0)) |
| iMER = 0; |
| else if ((EqRegTdSqrErrI + EqRegTdSqrErrQ) == 0) { |
| /* No error at all, this must be the HW reset value |
| * Apparently no first measurement yet |
| * Set MER to 0.0 */ |
| iMER = 0; |
| } else { |
| SqrErrIQ = (EqRegTdSqrErrI + EqRegTdSqrErrQ) << |
| EqRegTdSqrErrExp; |
| if ((transmissionParams & |
| OFDM_SC_RA_RAM_OP_PARAM_MODE__M) |
| == OFDM_SC_RA_RAM_OP_PARAM_MODE_2K) |
| tpsCnt = 17; |
| else |
| tpsCnt = 68; |
| |
| /* IMER = 100 * log10 (x) |
| where x = (EqRegTdTpsPwrOfs^2 * |
| EqRegTdReqSmbCnt * tpsCnt)/SqrErrIQ |
| |
| => IMER = a + b -c |
| where a = 100 * log10 (EqRegTdTpsPwrOfs^2) |
| b = 100 * log10 (EqRegTdReqSmbCnt * tpsCnt) |
| c = 100 * log10 (SqrErrIQ) |
| */ |
| |
| /* log(x) x = 9bits * 9bits->18 bits */ |
| a = Log10Times100(EqRegTdTpsPwrOfs * |
| EqRegTdTpsPwrOfs); |
| /* log(x) x = 16bits * 7bits->23 bits */ |
| b = Log10Times100(EqRegTdReqSmbCnt * tpsCnt); |
| /* log(x) x = (16bits + 16bits) << 15 ->32 bits */ |
| c = Log10Times100(SqrErrIQ); |
| |
| iMER = a + b; |
| /* No negative MER, clip to zero */ |
| if (iMER > c) |
| iMER -= c; |
| else |
| iMER = 0; |
| } |
| *pSignalToNoise = iMER; |
| |
| error: |
| if (status < 0) |
| printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); |
| return status; |
| } |
| |
| static int GetSignalToNoise(struct drxk_state *state, s32 *pSignalToNoise) |
| { |
| dprintk(1, "\n"); |
| |
| *pSignalToNoise = 0; |
| switch (state->m_OperationMode) { |
| case OM_DVBT: |
| return GetDVBTSignalToNoise(state, pSignalToNoise); |
| case OM_QAM_ITU_A: |
| case OM_QAM_ITU_C: |
| return GetQAMSignalToNoise(state, pSignalToNoise); |
| default: |
| break; |
| } |
| return 0; |
| } |
| |
| #if 0 |
| static int GetDVBTQuality(struct drxk_state *state, s32 *pQuality) |
| { |
| /* SNR Values for quasi errorfree reception rom Nordig 2.2 */ |
| int status = 0; |
| |
| dprintk(1, "\n"); |
| |
| static s32 QE_SN[] = { |
| 51, /* QPSK 1/2 */ |
| 69, /* QPSK 2/3 */ |
| 79, /* QPSK 3/4 */ |
| 89, /* QPSK 5/6 */ |
| 97, /* QPSK 7/8 */ |
| 108, /* 16-QAM 1/2 */ |
| 131, /* 16-QAM 2/3 */ |
| 146, /* 16-QAM 3/4 */ |
| 156, /* 16-QAM 5/6 */ |
| 160, /* 16-QAM 7/8 */ |
| 165, /* 64-QAM 1/2 */ |
| 187, /* 64-QAM 2/3 */ |
| 202, /* 64-QAM 3/4 */ |
| 216, /* 64-QAM 5/6 */ |
| 225, /* 64-QAM 7/8 */ |
| }; |
| |
| *pQuality = 0; |
| |
| do { |
| s32 SignalToNoise = 0; |
| u16 Constellation = 0; |
| u16 CodeRate = 0; |
| u32 SignalToNoiseRel; |
| u32 BERQuality; |
| |
| status = GetDVBTSignalToNoise(state, &SignalToNoise); |
| if (status < 0) |
| break; |
| status = read16(state, OFDM_EQ_TOP_TD_TPS_CONST__A, &Constellation); |
| if (status < 0) |
| break; |
| Constellation &= OFDM_EQ_TOP_TD_TPS_CONST__M; |
| |
| status = read16(state, OFDM_EQ_TOP_TD_TPS_CODE_HP__A, &CodeRate); |
| if (status < 0) |
| break; |
| CodeRate &= OFDM_EQ_TOP_TD_TPS_CODE_HP__M; |
| |
| if (Constellation > OFDM_EQ_TOP_TD_TPS_CONST_64QAM || |
| CodeRate > OFDM_EQ_TOP_TD_TPS_CODE_LP_7_8) |
| break; |
| SignalToNoiseRel = SignalToNoise - |
| QE_SN[Constellation * 5 + CodeRate]; |
| BERQuality = 100; |
| |
| if (SignalToNoiseRel < -70) |
| *pQuality = 0; |
| else if (SignalToNoiseRel < 30) |
| *pQuality = ((SignalToNoiseRel + 70) * |
| BERQuality) / 100; |
| else |
| *pQuality = BERQuality; |
| } while (0); |
| return 0; |
| }; |
| |
| static int GetDVBCQuality(struct drxk_state *state, s32 *pQuality) |
| { |
| int status = 0; |
| *pQuality = 0; |
| |
| dprintk(1, "\n"); |
| |
| do { |
| u32 SignalToNoise = 0; |
| u32 BERQuality = 100; |
| u32 SignalToNoiseRel = 0; |
| |
| status = GetQAMSignalToNoise(state, &SignalToNoise); |
| if (status < 0) |
| break; |
| |
| switch (state->props.modulation) { |
| case QAM_16: |
| SignalToNoiseRel = SignalToNoise - 200; |
| break; |
| case QAM_32: |
| SignalToNoiseRel = SignalToNoise - 230; |
| break; /* Not in NorDig */ |
| case QAM_64: |
| SignalToNoiseRel = SignalToNoise - 260; |
| break; |
| case QAM_128: |
| SignalToNoiseRel = SignalToNoise - 290; |
| break; |
| default: |
| case QAM_256: |
| SignalToNoiseRel = SignalToNoise - 320; |
| break; |
| } |
| |
| if (SignalToNoiseRel < -70) |
| *pQuality = 0; |
| else if (SignalToNoiseRel < 30) |
| *pQuality = ((SignalToNoiseRel + 70) * |
| BERQuality) / 100; |
| else |
| *pQuality = BERQuality; |
| } while (0); |
| |
| return status; |
| } |
| |
| static int GetQuality(struct drxk_state *state, s32 *pQuality) |
| { |
| dprintk(1, "\n"); |
| |
| switch (state->m_OperationMode) { |
| case OM_DVBT: |
| return GetDVBTQuality(state, pQuality); |
| case OM_QAM_ITU_A: |
| return GetDVBCQuality(state, pQuality); |
| default: |
| break; |
| } |
| |
| return 0; |
| } |
| #endif |
| |
| /* Free data ram in SIO HI */ |
| #define SIO_HI_RA_RAM_USR_BEGIN__A 0x420040 |
| #define SIO_HI_RA_RAM_USR_END__A 0x420060 |
| |
| #define DRXK_HI_ATOMIC_BUF_START (SIO_HI_RA_RAM_USR_BEGIN__A) |
| #define DRXK_HI_ATOMIC_BUF_END (SIO_HI_RA_RAM_USR_BEGIN__A + 7) |
| #define DRXK_HI_ATOMIC_READ SIO_HI_RA_RAM_PAR_3_ACP_RW_READ |
| #define DRXK_HI_ATOMIC_WRITE SIO_HI_RA_RAM_PAR_3_ACP_RW_WRITE |
| |
| #define DRXDAP_FASI_ADDR2BLOCK(addr) (((addr) >> 22) & 0x3F) |
| #define DRXDAP_FASI_ADDR2BANK(addr) (((addr) >> 16) & 0x3F) |
| #define DRXDAP_FASI_ADDR2OFFSET(addr) ((addr) & 0x7FFF) |
| |
| static int ConfigureI2CBridge(struct drxk_state *state, bool bEnableBridge) |
| { |
| int status = -EINVAL; |
| |
| dprintk(1, "\n"); |
| |
| if (state->m_DrxkState == DRXK_UNINITIALIZED) |
| goto error; |
| if (state->m_DrxkState == DRXK_POWERED_DOWN) |
| goto error; |
| |
| if (state->no_i2c_bridge) |
| return 0; |
| |
| status = write16(state, SIO_HI_RA_RAM_PAR_1__A, SIO_HI_RA_RAM_PAR_1_PAR1_SEC_KEY); |
| if (status < 0) |
| goto error; |
| if (bEnableBridge) { |
| status = write16(state, SIO_HI_RA_RAM_PAR_2__A, SIO_HI_RA_RAM_PAR_2_BRD_CFG_CLOSED); |
| if (status < 0) |
| goto error; |
| } else { |
| status = write16(state, SIO_HI_RA_RAM_PAR_2__A, SIO_HI_RA_RAM_PAR_2_BRD_CFG_OPEN); |
| if (status < 0) |
| goto error; |
| } |
| |
| status = HI_Command(state, SIO_HI_RA_RAM_CMD_BRDCTRL, 0); |
| |
| error: |
| if (status < 0) |
| printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); |
| return status; |
| } |
| |
| static int SetPreSaw(struct drxk_state *state, |
| struct SCfgPreSaw *pPreSawCfg) |
| { |
| int status = -EINVAL; |
| |
| dprintk(1, "\n"); |
| |
| if ((pPreSawCfg == NULL) |
| || (pPreSawCfg->reference > IQM_AF_PDREF__M)) |
| goto error; |
| |
| status = write16(state, IQM_AF_PDREF__A, pPreSawCfg->reference); |
| error: |
| if (status < 0) |
| printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); |
| return status; |
| } |
| |
| static int BLDirectCmd(struct drxk_state *state, u32 targetAddr, |
| u16 romOffset, u16 nrOfElements, u32 timeOut) |
| { |
| u16 blStatus = 0; |
| u16 offset = (u16) ((targetAddr >> 0) & 0x00FFFF); |
| u16 blockbank = (u16) ((targetAddr >> 16) & 0x000FFF); |
| int status; |
| unsigned long end; |
| |
| dprintk(1, "\n"); |
| |
| mutex_lock(&state->mutex); |
| status = write16(state, SIO_BL_MODE__A, SIO_BL_MODE_DIRECT); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_BL_TGT_HDR__A, blockbank); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_BL_TGT_ADDR__A, offset); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_BL_SRC_ADDR__A, romOffset); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_BL_SRC_LEN__A, nrOfElements); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_BL_ENABLE__A, SIO_BL_ENABLE_ON); |
| if (status < 0) |
| goto error; |
| |
| end = jiffies + msecs_to_jiffies(timeOut); |
| do { |
| status = read16(state, SIO_BL_STATUS__A, &blStatus); |
| if (status < 0) |
| goto error; |
| } while ((blStatus == 0x1) && time_is_after_jiffies(end)); |
| if (blStatus == 0x1) { |
| printk(KERN_ERR "drxk: SIO not ready\n"); |
| status = -EINVAL; |
| goto error2; |
| } |
| error: |
| if (status < 0) |
| printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); |
| error2: |
| mutex_unlock(&state->mutex); |
| return status; |
| |
| } |
| |
| static int ADCSyncMeasurement(struct drxk_state *state, u16 *count) |
| { |
| u16 data = 0; |
| int status; |
| |
| dprintk(1, "\n"); |
| |
| /* Start measurement */ |
| status = write16(state, IQM_AF_COMM_EXEC__A, IQM_AF_COMM_EXEC_ACTIVE); |
| if (status < 0) |
| goto error; |
| status = write16(state, IQM_AF_START_LOCK__A, 1); |
| if (status < 0) |
| goto error; |
| |
| *count = 0; |
| status = read16(state, IQM_AF_PHASE0__A, &data); |
| if (status < 0) |
| goto error; |
| if (data == 127) |
| *count = *count + 1; |
| status = read16(state, IQM_AF_PHASE1__A, &data); |
| if (status < 0) |
| goto error; |
| if (data == 127) |
| *count = *count + 1; |
| status = read16(state, IQM_AF_PHASE2__A, &data); |
| if (status < 0) |
| goto error; |
| if (data == 127) |
| *count = *count + 1; |
| |
| error: |
| if (status < 0) |
| printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); |
| return status; |
| } |
| |
| static int ADCSynchronization(struct drxk_state *state) |
| { |
| u16 count = 0; |
| int status; |
| |
| dprintk(1, "\n"); |
| |
| status = ADCSyncMeasurement(state, &count); |
| if (status < 0) |
| goto error; |
| |
| if (count == 1) { |
| /* Try sampling on a diffrent edge */ |
| u16 clkNeg = 0; |
| |
| status = read16(state, IQM_AF_CLKNEG__A, &clkNeg); |
| if (status < 0) |
| goto error; |
| if ((clkNeg | IQM_AF_CLKNEG_CLKNEGDATA__M) == |
| IQM_AF_CLKNEG_CLKNEGDATA_CLK_ADC_DATA_POS) { |
| clkNeg &= (~(IQM_AF_CLKNEG_CLKNEGDATA__M)); |
| clkNeg |= |
| IQM_AF_CLKNEG_CLKNEGDATA_CLK_ADC_DATA_NEG; |
| } else { |
| clkNeg &= (~(IQM_AF_CLKNEG_CLKNEGDATA__M)); |
| clkNeg |= |
| IQM_AF_CLKNEG_CLKNEGDATA_CLK_ADC_DATA_POS; |
| } |
| status = write16(state, IQM_AF_CLKNEG__A, clkNeg); |
| if (status < 0) |
| goto error; |
| status = ADCSyncMeasurement(state, &count); |
| if (status < 0) |
| goto error; |
| } |
| |
| if (count < 2) |
| status = -EINVAL; |
| error: |
| if (status < 0) |
| printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); |
| return status; |
| } |
| |
| static int SetFrequencyShifter(struct drxk_state *state, |
| u16 intermediateFreqkHz, |
| s32 tunerFreqOffset, bool isDTV) |
| { |
| bool selectPosImage = false; |
| u32 rfFreqResidual = tunerFreqOffset; |
| u32 fmFrequencyShift = 0; |
| bool tunerMirror = !state->m_bMirrorFreqSpect; |
| u32 adcFreq; |
| bool adcFlip; |
| int status; |
| u32 ifFreqActual; |
| u32 samplingFrequency = (u32) (state->m_sysClockFreq / 3); |
| u32 frequencyShift; |
| bool imageToSelect; |
| |
| dprintk(1, "\n"); |
| |
| /* |
| Program frequency shifter |
| No need to account for mirroring on RF |
| */ |
| if (isDTV) { |
| if ((state->m_OperationMode == OM_QAM_ITU_A) || |
| (state->m_OperationMode == OM_QAM_ITU_C) || |
| (state->m_OperationMode == OM_DVBT)) |
| selectPosImage = true; |
| else |
| selectPosImage = false; |
| } |
| if (tunerMirror) |
| /* tuner doesn't mirror */ |
| ifFreqActual = intermediateFreqkHz + |
| rfFreqResidual + fmFrequencyShift; |
| else |
| /* tuner mirrors */ |
| ifFreqActual = intermediateFreqkHz - |
| rfFreqResidual - fmFrequencyShift; |
| if (ifFreqActual > samplingFrequency / 2) { |
| /* adc mirrors */ |
| adcFreq = samplingFrequency - ifFreqActual; |
| adcFlip = true; |
| } else { |
| /* adc doesn't mirror */ |
| adcFreq = ifFreqActual; |
| adcFlip = false; |
| } |
| |
| frequencyShift = adcFreq; |
| imageToSelect = state->m_rfmirror ^ tunerMirror ^ |
| adcFlip ^ selectPosImage; |
| state->m_IqmFsRateOfs = |
| Frac28a((frequencyShift), samplingFrequency); |
| |
| if (imageToSelect) |
| state->m_IqmFsRateOfs = ~state->m_IqmFsRateOfs + 1; |
| |
| /* Program frequency shifter with tuner offset compensation */ |
| /* frequencyShift += tunerFreqOffset; TODO */ |
| status = write32(state, IQM_FS_RATE_OFS_LO__A, |
| state->m_IqmFsRateOfs); |
| if (status < 0) |
| printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); |
| return status; |
| } |
| |
| static int InitAGC(struct drxk_state *state, bool isDTV) |
| { |
| u16 ingainTgt = 0; |
| u16 ingainTgtMin = 0; |
| u16 ingainTgtMax = 0; |
| u16 clpCyclen = 0; |
| u16 clpSumMin = 0; |
| u16 clpDirTo = 0; |
| u16 snsSumMin = 0; |
| u16 snsSumMax = 0; |
| u16 clpSumMax = 0; |
| u16 snsDirTo = 0; |
| u16 kiInnergainMin = 0; |
| u16 ifIaccuHiTgt = 0; |
| u16 ifIaccuHiTgtMin = 0; |
| u16 ifIaccuHiTgtMax = 0; |
| u16 data = 0; |
| u16 fastClpCtrlDelay = 0; |
| u16 clpCtrlMode = 0; |
| int status = 0; |
| |
| dprintk(1, "\n"); |
| |
| /* Common settings */ |
| snsSumMax = 1023; |
| ifIaccuHiTgtMin = 2047; |
| clpCyclen = 500; |
| clpSumMax = 1023; |
| |
| /* AGCInit() not available for DVBT; init done in microcode */ |
| if (!IsQAM(state)) { |
| printk(KERN_ERR "drxk: %s: mode %d is not DVB-C\n", __func__, state->m_OperationMode); |
| return -EINVAL; |
| } |
| |
| /* FIXME: Analog TV AGC require different settings */ |
| |
| /* Standard specific settings */ |
| clpSumMin = 8; |
| clpDirTo = (u16) -9; |
| clpCtrlMode = 0; |
| snsSumMin = 8; |
| snsDirTo = (u16) -9; |
| kiInnergainMin = (u16) -1030; |
| ifIaccuHiTgtMax = 0x2380; |
| ifIaccuHiTgt = 0x2380; |
| ingainTgtMin = 0x0511; |
| ingainTgt = 0x0511; |
| ingainTgtMax = 5119; |
| fastClpCtrlDelay = state->m_qamIfAgcCfg.FastClipCtrlDelay; |
| |
| status = write16(state, SCU_RAM_AGC_FAST_CLP_CTRL_DELAY__A, fastClpCtrlDelay); |
| if (status < 0) |
| goto error; |
| |
| status = write16(state, SCU_RAM_AGC_CLP_CTRL_MODE__A, clpCtrlMode); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_AGC_INGAIN_TGT__A, ingainTgt); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_AGC_INGAIN_TGT_MIN__A, ingainTgtMin); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_AGC_INGAIN_TGT_MAX__A, ingainTgtMax); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_AGC_IF_IACCU_HI_TGT_MIN__A, ifIaccuHiTgtMin); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_AGC_IF_IACCU_HI_TGT_MAX__A, ifIaccuHiTgtMax); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_AGC_IF_IACCU_HI__A, 0); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_AGC_IF_IACCU_LO__A, 0); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_AGC_RF_IACCU_HI__A, 0); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_AGC_RF_IACCU_LO__A, 0); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_AGC_CLP_SUM_MAX__A, clpSumMax); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_AGC_SNS_SUM_MAX__A, snsSumMax); |
| if (status < 0) |
| goto error; |
| |
| status = write16(state, SCU_RAM_AGC_KI_INNERGAIN_MIN__A, kiInnergainMin); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_AGC_IF_IACCU_HI_TGT__A, ifIaccuHiTgt); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_AGC_CLP_CYCLEN__A, clpCyclen); |
| if (status < 0) |
| goto error; |
| |
| status = write16(state, SCU_RAM_AGC_RF_SNS_DEV_MAX__A, 1023); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_AGC_RF_SNS_DEV_MIN__A, (u16) -1023); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_AGC_FAST_SNS_CTRL_DELAY__A, 50); |
| if (status < 0) |
| goto error; |
| |
| status = write16(state, SCU_RAM_AGC_KI_MAXMINGAIN_TH__A, 20); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_AGC_CLP_SUM_MIN__A, clpSumMin); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_AGC_SNS_SUM_MIN__A, snsSumMin); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_AGC_CLP_DIR_TO__A, clpDirTo); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_AGC_SNS_DIR_TO__A, snsDirTo); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_AGC_KI_MINGAIN__A, 0x7fff); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_AGC_KI_MAXGAIN__A, 0x0); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_AGC_KI_MIN__A, 0x0117); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_AGC_KI_MAX__A, 0x0657); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_AGC_CLP_SUM__A, 0); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_AGC_CLP_CYCCNT__A, 0); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_AGC_CLP_DIR_WD__A, 0); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_AGC_CLP_DIR_STP__A, 1); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_AGC_SNS_SUM__A, 0); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_AGC_SNS_CYCCNT__A, 0); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_AGC_SNS_DIR_WD__A, 0); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_AGC_SNS_DIR_STP__A, 1); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_AGC_SNS_CYCLEN__A, 500); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_AGC_KI_CYCLEN__A, 500); |
| if (status < 0) |
| goto error; |
| |
| /* Initialize inner-loop KI gain factors */ |
| status = read16(state, SCU_RAM_AGC_KI__A, &data); |
| if (status < 0) |
| goto error; |
| |
| data = 0x0657; |
| data &= ~SCU_RAM_AGC_KI_RF__M; |
| data |= (DRXK_KI_RAGC_QAM << SCU_RAM_AGC_KI_RF__B); |
| data &= ~SCU_RAM_AGC_KI_IF__M; |
| data |= (DRXK_KI_IAGC_QAM << SCU_RAM_AGC_KI_IF__B); |
| |
| status = write16(state, SCU_RAM_AGC_KI__A, data); |
| error: |
| if (status < 0) |
| printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); |
| return status; |
| } |
| |
| static int DVBTQAMGetAccPktErr(struct drxk_state *state, u16 *packetErr) |
| { |
| int status; |
| |
| dprintk(1, "\n"); |
| if (packetErr == NULL) |
| status = write16(state, SCU_RAM_FEC_ACCUM_PKT_FAILURES__A, 0); |
| else |
| status = read16(state, SCU_RAM_FEC_ACCUM_PKT_FAILURES__A, packetErr); |
| if (status < 0) |
| printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); |
| return status; |
| } |
| |
| static int DVBTScCommand(struct drxk_state *state, |
| u16 cmd, u16 subcmd, |
| u16 param0, u16 param1, u16 param2, |
| u16 param3, u16 param4) |
| { |
| u16 curCmd = 0; |
| u16 errCode = 0; |
| u16 retryCnt = 0; |
| u16 scExec = 0; |
| int status; |
| |
| dprintk(1, "\n"); |
| status = read16(state, OFDM_SC_COMM_EXEC__A, &scExec); |
| if (scExec != 1) { |
| /* SC is not running */ |
| status = -EINVAL; |
| } |
| if (status < 0) |
| goto error; |
| |
| /* Wait until sc is ready to receive command */ |
| retryCnt = 0; |
| do { |
| msleep(1); |
| status = read16(state, OFDM_SC_RA_RAM_CMD__A, &curCmd); |
| retryCnt++; |
| } while ((curCmd != 0) && (retryCnt < DRXK_MAX_RETRIES)); |
| if (retryCnt >= DRXK_MAX_RETRIES && (status < 0)) |
| goto error; |
| |
| /* Write sub-command */ |
| switch (cmd) { |
| /* All commands using sub-cmd */ |
| case OFDM_SC_RA_RAM_CMD_PROC_START: |
| case OFDM_SC_RA_RAM_CMD_SET_PREF_PARAM: |
| case OFDM_SC_RA_RAM_CMD_PROGRAM_PARAM: |
| status = write16(state, OFDM_SC_RA_RAM_CMD_ADDR__A, subcmd); |
| if (status < 0) |
| goto error; |
| break; |
| default: |
| /* Do nothing */ |
| break; |
| } |
| |
| /* Write needed parameters and the command */ |
| switch (cmd) { |
| /* All commands using 5 parameters */ |
| /* All commands using 4 parameters */ |
| /* All commands using 3 parameters */ |
| /* All commands using 2 parameters */ |
| case OFDM_SC_RA_RAM_CMD_PROC_START: |
| case OFDM_SC_RA_RAM_CMD_SET_PREF_PARAM: |
| case OFDM_SC_RA_RAM_CMD_PROGRAM_PARAM: |
| status = write16(state, OFDM_SC_RA_RAM_PARAM1__A, param1); |
| /* All commands using 1 parameters */ |
| case OFDM_SC_RA_RAM_CMD_SET_ECHO_TIMING: |
| case OFDM_SC_RA_RAM_CMD_USER_IO: |
| status = write16(state, OFDM_SC_RA_RAM_PARAM0__A, param0); |
| /* All commands using 0 parameters */ |
| case OFDM_SC_RA_RAM_CMD_GET_OP_PARAM: |
| case OFDM_SC_RA_RAM_CMD_NULL: |
| /* Write command */ |
| status = write16(state, OFDM_SC_RA_RAM_CMD__A, cmd); |
| break; |
| default: |
| /* Unknown command */ |
| status = -EINVAL; |
| } |
| if (status < 0) |
| goto error; |
| |
| /* Wait until sc is ready processing command */ |
| retryCnt = 0; |
| do { |
| msleep(1); |
| status = read16(state, OFDM_SC_RA_RAM_CMD__A, &curCmd); |
| retryCnt++; |
| } while ((curCmd != 0) && (retryCnt < DRXK_MAX_RETRIES)); |
| if (retryCnt >= DRXK_MAX_RETRIES && (status < 0)) |
| goto error; |
| |
| /* Check for illegal cmd */ |
| status = read16(state, OFDM_SC_RA_RAM_CMD_ADDR__A, &errCode); |
| if (errCode == 0xFFFF) { |
| /* illegal command */ |
| status = -EINVAL; |
| } |
| if (status < 0) |
| goto error; |
| |
| /* Retreive results parameters from SC */ |
| switch (cmd) { |
| /* All commands yielding 5 results */ |
| /* All commands yielding 4 results */ |
| /* All commands yielding 3 results */ |
| /* All commands yielding 2 results */ |
| /* All commands yielding 1 result */ |
| case OFDM_SC_RA_RAM_CMD_USER_IO: |
| case OFDM_SC_RA_RAM_CMD_GET_OP_PARAM: |
| status = read16(state, OFDM_SC_RA_RAM_PARAM0__A, &(param0)); |
| /* All commands yielding 0 results */ |
| case OFDM_SC_RA_RAM_CMD_SET_ECHO_TIMING: |
| case OFDM_SC_RA_RAM_CMD_SET_TIMER: |
| case OFDM_SC_RA_RAM_CMD_PROC_START: |
| case OFDM_SC_RA_RAM_CMD_SET_PREF_PARAM: |
| case OFDM_SC_RA_RAM_CMD_PROGRAM_PARAM: |
| case OFDM_SC_RA_RAM_CMD_NULL: |
| break; |
| default: |
| /* Unknown command */ |
| status = -EINVAL; |
| break; |
| } /* switch (cmd->cmd) */ |
| error: |
| if (status < 0) |
| printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); |
| return status; |
| } |
| |
| static int PowerUpDVBT(struct drxk_state *state) |
| { |
| enum DRXPowerMode powerMode = DRX_POWER_UP; |
| int status; |
| |
| dprintk(1, "\n"); |
| status = CtrlPowerMode(state, &powerMode); |
| if (status < 0) |
| printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); |
| return status; |
| } |
| |
| static int DVBTCtrlSetIncEnable(struct drxk_state *state, bool *enabled) |
| { |
| int status; |
| |
| dprintk(1, "\n"); |
| if (*enabled == true) |
| status = write16(state, IQM_CF_BYPASSDET__A, 0); |
| else |
| status = write16(state, IQM_CF_BYPASSDET__A, 1); |
| if (status < 0) |
| printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); |
| return status; |
| } |
| |
| #define DEFAULT_FR_THRES_8K 4000 |
| static int DVBTCtrlSetFrEnable(struct drxk_state *state, bool *enabled) |
| { |
| |
| int status; |
| |
| dprintk(1, "\n"); |
| if (*enabled == true) { |
| /* write mask to 1 */ |
| status = write16(state, OFDM_SC_RA_RAM_FR_THRES_8K__A, |
| DEFAULT_FR_THRES_8K); |
| } else { |
| /* write mask to 0 */ |
| status = write16(state, OFDM_SC_RA_RAM_FR_THRES_8K__A, 0); |
| } |
| if (status < 0) |
| printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); |
| |
| return status; |
| } |
| |
| static int DVBTCtrlSetEchoThreshold(struct drxk_state *state, |
| struct DRXKCfgDvbtEchoThres_t *echoThres) |
| { |
| u16 data = 0; |
| int status; |
| |
| dprintk(1, "\n"); |
| status = read16(state, OFDM_SC_RA_RAM_ECHO_THRES__A, &data); |
| if (status < 0) |
| goto error; |
| |
| switch (echoThres->fftMode) { |
| case DRX_FFTMODE_2K: |
| data &= ~OFDM_SC_RA_RAM_ECHO_THRES_2K__M; |
| data |= ((echoThres->threshold << |
| OFDM_SC_RA_RAM_ECHO_THRES_2K__B) |
| & (OFDM_SC_RA_RAM_ECHO_THRES_2K__M)); |
| break; |
| case DRX_FFTMODE_8K: |
| data &= ~OFDM_SC_RA_RAM_ECHO_THRES_8K__M; |
| data |= ((echoThres->threshold << |
| OFDM_SC_RA_RAM_ECHO_THRES_8K__B) |
| & (OFDM_SC_RA_RAM_ECHO_THRES_8K__M)); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| status = write16(state, OFDM_SC_RA_RAM_ECHO_THRES__A, data); |
| error: |
| if (status < 0) |
| printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); |
| return status; |
| } |
| |
| static int DVBTCtrlSetSqiSpeed(struct drxk_state *state, |
| enum DRXKCfgDvbtSqiSpeed *speed) |
| { |
| int status = -EINVAL; |
| |
| dprintk(1, "\n"); |
| |
| switch (*speed) { |
| case DRXK_DVBT_SQI_SPEED_FAST: |
| case DRXK_DVBT_SQI_SPEED_MEDIUM: |
| case DRXK_DVBT_SQI_SPEED_SLOW: |
| break; |
| default: |
| goto error; |
| } |
| status = write16(state, SCU_RAM_FEC_PRE_RS_BER_FILTER_SH__A, |
| (u16) *speed); |
| error: |
| if (status < 0) |
| printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); |
| return status; |
| } |
| |
| /*============================================================================*/ |
| |
| /** |
| * \brief Activate DVBT specific presets |
| * \param demod instance of demodulator. |
| * \return DRXStatus_t. |
| * |
| * Called in DVBTSetStandard |
| * |
| */ |
| static int DVBTActivatePresets(struct drxk_state *state) |
| { |
| int status; |
| bool setincenable = false; |
| bool setfrenable = true; |
| |
| struct DRXKCfgDvbtEchoThres_t echoThres2k = { 0, DRX_FFTMODE_2K }; |
| struct DRXKCfgDvbtEchoThres_t echoThres8k = { 0, DRX_FFTMODE_8K }; |
| |
| dprintk(1, "\n"); |
| status = DVBTCtrlSetIncEnable(state, &setincenable); |
| if (status < 0) |
| goto error; |
| status = DVBTCtrlSetFrEnable(state, &setfrenable); |
| if (status < 0) |
| goto error; |
| status = DVBTCtrlSetEchoThreshold(state, &echoThres2k); |
| if (status < 0) |
| goto error; |
| status = DVBTCtrlSetEchoThreshold(state, &echoThres8k); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_AGC_INGAIN_TGT_MAX__A, state->m_dvbtIfAgcCfg.IngainTgtMax); |
| error: |
| if (status < 0) |
| printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); |
| return status; |
| } |
| |
| /*============================================================================*/ |
| |
| /** |
| * \brief Initialize channelswitch-independent settings for DVBT. |
| * \param demod instance of demodulator. |
| * \return DRXStatus_t. |
| * |
| * For ROM code channel filter taps are loaded from the bootloader. For microcode |
| * the DVB-T taps from the drxk_filters.h are used. |
| */ |
| static int SetDVBTStandard(struct drxk_state *state, |
| enum OperationMode oMode) |
| { |
| u16 cmdResult = 0; |
| u16 data = 0; |
| int status; |
| |
| dprintk(1, "\n"); |
| |
| PowerUpDVBT(state); |
| /* added antenna switch */ |
| SwitchAntennaToDVBT(state); |
| /* send OFDM reset command */ |
| status = scu_command(state, SCU_RAM_COMMAND_STANDARD_OFDM | SCU_RAM_COMMAND_CMD_DEMOD_RESET, 0, NULL, 1, &cmdResult); |
| if (status < 0) |
| goto error; |
| |
| /* send OFDM setenv command */ |
| status = scu_command(state, SCU_RAM_COMMAND_STANDARD_OFDM | SCU_RAM_COMMAND_CMD_DEMOD_SET_ENV, 0, NULL, 1, &cmdResult); |
| if (status < 0) |
| goto error; |
| |
| /* reset datapath for OFDM, processors first */ |
| status = write16(state, OFDM_SC_COMM_EXEC__A, OFDM_SC_COMM_EXEC_STOP); |
| if (status < 0) |
| goto error; |
| status = write16(state, OFDM_LC_COMM_EXEC__A, OFDM_LC_COMM_EXEC_STOP); |
| if (status < 0) |
| goto error; |
| status = write16(state, IQM_COMM_EXEC__A, IQM_COMM_EXEC_B_STOP); |
| if (status < 0) |
| goto error; |
| |
| /* IQM setup */ |
| /* synchronize on ofdstate->m_festart */ |
| status = write16(state, IQM_AF_UPD_SEL__A, 1); |
| if (status < 0) |
| goto error; |
| /* window size for clipping ADC detection */ |
| status = write16(state, IQM_AF_CLP_LEN__A, 0); |
| if (status < 0) |
| goto error; |
| /* window size for for sense pre-SAW detection */ |
| status = write16(state, IQM_AF_SNS_LEN__A, 0); |
| if (status < 0) |
| goto error; |
| /* sense threshold for sense pre-SAW detection */ |
| status = write16(state, IQM_AF_AMUX__A, IQM_AF_AMUX_SIGNAL2ADC); |
| if (status < 0) |
| goto error; |
| status = SetIqmAf(state, true); |
| if (status < 0) |
| goto error; |
| |
| status = write16(state, IQM_AF_AGC_RF__A, 0); |
| if (status < 0) |
| goto error; |
| |
| /* Impulse noise cruncher setup */ |
| status = write16(state, IQM_AF_INC_LCT__A, 0); /* crunch in IQM_CF */ |
| if (status < 0) |
| goto error; |
| status = write16(state, IQM_CF_DET_LCT__A, 0); /* detect in IQM_CF */ |
| if (status < 0) |
| goto error; |
| status = write16(state, IQM_CF_WND_LEN__A, 3); /* peak detector window length */ |
| if (status < 0) |
| goto error; |
| |
| status = write16(state, IQM_RC_STRETCH__A, 16); |
| if (status < 0) |
| goto error; |
| status = write16(state, IQM_CF_OUT_ENA__A, 0x4); /* enable output 2 */ |
| if (status < 0) |
| goto error; |
| status = write16(state, IQM_CF_DS_ENA__A, 0x4); /* decimate output 2 */ |
| if (status < 0) |
| goto error; |
| status = write16(state, IQM_CF_SCALE__A, 1600); |
| if (status < 0) |
| goto error; |
| status = write16(state, IQM_CF_SCALE_SH__A, 0); |
| if (status < 0) |
| goto error; |
| |
| /* virtual clipping threshold for clipping ADC detection */ |
| status = write16(state, IQM_AF_CLP_TH__A, 448); |
| if (status < 0) |
| goto error; |
| status = write16(state, IQM_CF_DATATH__A, 495); /* crunching threshold */ |
| if (status < 0) |
| goto error; |
| |
| status = BLChainCmd(state, DRXK_BL_ROM_OFFSET_TAPS_DVBT, DRXK_BLCC_NR_ELEMENTS_TAPS, DRXK_BLC_TIMEOUT); |
| if (status < 0) |
| goto error; |
| |
| status = write16(state, IQM_CF_PKDTH__A, 2); /* peak detector threshold */ |
| if (status < 0) |
| goto error; |
| status = write16(state, IQM_CF_POW_MEAS_LEN__A, 2); |
| if (status < 0) |
| goto error; |
| /* enable power measurement interrupt */ |
| status = write16(state, IQM_CF_COMM_INT_MSK__A, 1); |
| if (status < 0) |
| goto error; |
| status = write16(state, IQM_COMM_EXEC__A, IQM_COMM_EXEC_B_ACTIVE); |
| if (status < 0) |
| goto error; |
| |
| /* IQM will not be reset from here, sync ADC and update/init AGC */ |
| status = ADCSynchronization(state); |
| if (status < 0) |
| goto error; |
| status = SetPreSaw(state, &state->m_dvbtPreSawCfg); |
| if (status < 0) |
| goto error; |
| |
| /* Halt SCU to enable safe non-atomic accesses */ |
| status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_HOLD); |
| if (status < 0) |
| goto error; |
| |
| status = SetAgcRf(state, &state->m_dvbtRfAgcCfg, true); |
| if (status < 0) |
| goto error; |
| status = SetAgcIf(state, &state->m_dvbtIfAgcCfg, true); |
| if (status < 0) |
| goto error; |
| |
| /* Set Noise Estimation notch width and enable DC fix */ |
| status = read16(state, OFDM_SC_RA_RAM_CONFIG__A, &data); |
| if (status < 0) |
| goto error; |
| data |= OFDM_SC_RA_RAM_CONFIG_NE_FIX_ENABLE__M; |
| status = write16(state, OFDM_SC_RA_RAM_CONFIG__A, data); |
| if (status < 0) |
| goto error; |
| |
| /* Activate SCU to enable SCU commands */ |
| status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_ACTIVE); |
| if (status < 0) |
| goto error; |
| |
| if (!state->m_DRXK_A3_ROM_CODE) { |
| /* AGCInit() is not done for DVBT, so set agcFastClipCtrlDelay */ |
| status = write16(state, SCU_RAM_AGC_FAST_CLP_CTRL_DELAY__A, state->m_dvbtIfAgcCfg.FastClipCtrlDelay); |
| if (status < 0) |
| goto error; |
| } |
| |
| /* OFDM_SC setup */ |
| #ifdef COMPILE_FOR_NONRT |
| status = write16(state, OFDM_SC_RA_RAM_BE_OPT_DELAY__A, 1); |
| if (status < 0) |
| goto error; |
| status = write16(state, OFDM_SC_RA_RAM_BE_OPT_INIT_DELAY__A, 2); |
| if (status < 0) |
| goto error; |
| #endif |
| |
| /* FEC setup */ |
| status = write16(state, FEC_DI_INPUT_CTL__A, 1); /* OFDM input */ |
| if (status < 0) |
| goto error; |
| |
| |
| #ifdef COMPILE_FOR_NONRT |
| status = write16(state, FEC_RS_MEASUREMENT_PERIOD__A, 0x400); |
| if (status < 0) |
| goto error; |
| #else |
| status = write16(state, FEC_RS_MEASUREMENT_PERIOD__A, 0x1000); |
| if (status < 0) |
| goto error; |
| #endif |
| status = write16(state, FEC_RS_MEASUREMENT_PRESCALE__A, 0x0001); |
| if (status < 0) |
| goto error; |
| |
| /* Setup MPEG bus */ |
| status = MPEGTSDtoSetup(state, OM_DVBT); |
| if (status < 0) |
| goto error; |
| /* Set DVBT Presets */ |
| status = DVBTActivatePresets(state); |
| if (status < 0) |
| goto error; |
| |
| error: |
| if (status < 0) |
| printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); |
| return status; |
| } |
| |
| /*============================================================================*/ |
| /** |
| * \brief Start dvbt demodulating for channel. |
| * \param demod instance of demodulator. |
| * \return DRXStatus_t. |
| */ |
| static int DVBTStart(struct drxk_state *state) |
| { |
| u16 param1; |
| int status; |
| /* DRXKOfdmScCmd_t scCmd; */ |
| |
| dprintk(1, "\n"); |
| /* Start correct processes to get in lock */ |
| /* DRXK: OFDM_SC_RA_RAM_PROC_LOCKTRACK is no longer in mapfile! */ |
| param1 = OFDM_SC_RA_RAM_LOCKTRACK_MIN; |
| status = DVBTScCommand(state, OFDM_SC_RA_RAM_CMD_PROC_START, 0, OFDM_SC_RA_RAM_SW_EVENT_RUN_NMASK__M, param1, 0, 0, 0); |
| if (status < 0) |
| goto error; |
| /* Start FEC OC */ |
| status = MPEGTSStart(state); |
| if (status < 0) |
| goto error; |
| status = write16(state, FEC_COMM_EXEC__A, FEC_COMM_EXEC_ACTIVE); |
| if (status < 0) |
| goto error; |
| error: |
| if (status < 0) |
| printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); |
| return status; |
| } |
| |
| |
| /*============================================================================*/ |
| |
| /** |
| * \brief Set up dvbt demodulator for channel. |
| * \param demod instance of demodulator. |
| * \return DRXStatus_t. |
| * // original DVBTSetChannel() |
| */ |
| static int SetDVBT(struct drxk_state *state, u16 IntermediateFreqkHz, |
| s32 tunerFreqOffset) |
| { |
| u16 cmdResult = 0; |
| u16 transmissionParams = 0; |
| u16 operationMode = 0; |
| u32 iqmRcRateOfs = 0; |
| u32 bandwidth = 0; |
| u16 param1; |
| int status; |
| |
| dprintk(1, "IF =%d, TFO = %d\n", IntermediateFreqkHz, tunerFreqOffset); |
| |
| status = scu_command(state, SCU_RAM_COMMAND_STANDARD_OFDM | SCU_RAM_COMMAND_CMD_DEMOD_STOP, 0, NULL, 1, &cmdResult); |
| if (status < 0) |
| goto error; |
| |
| /* Halt SCU to enable safe non-atomic accesses */ |
| status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_HOLD); |
| if (status < 0) |
| goto error; |
| |
| /* Stop processors */ |
| status = write16(state, OFDM_SC_COMM_EXEC__A, OFDM_SC_COMM_EXEC_STOP); |
| if (status < 0) |
| goto error; |
| status = write16(state, OFDM_LC_COMM_EXEC__A, OFDM_LC_COMM_EXEC_STOP); |
| if (status < 0) |
| goto error; |
| |
| /* Mandatory fix, always stop CP, required to set spl offset back to |
| hardware default (is set to 0 by ucode during pilot detection */ |
| status = write16(state, OFDM_CP_COMM_EXEC__A, OFDM_CP_COMM_EXEC_STOP); |
| if (status < 0) |
| goto error; |
| |
| /*== Write channel settings to device =====================================*/ |
| |
| /* mode */ |
| switch (state->props.transmission_mode) { |
| case TRANSMISSION_MODE_AUTO: |
| default: |
| operationMode |= OFDM_SC_RA_RAM_OP_AUTO_MODE__M; |
| /* fall through , try first guess DRX_FFTMODE_8K */ |
| case TRANSMISSION_MODE_8K: |
| transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_MODE_8K; |
| break; |
| case TRANSMISSION_MODE_2K: |
| transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_MODE_2K; |
| break; |
| } |
| |
| /* guard */ |
| switch (state->props.guard_interval) { |
| default: |
| case GUARD_INTERVAL_AUTO: |
| operationMode |= OFDM_SC_RA_RAM_OP_AUTO_GUARD__M; |
| /* fall through , try first guess DRX_GUARD_1DIV4 */ |
| case GUARD_INTERVAL_1_4: |
| transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_GUARD_4; |
| break; |
| case GUARD_INTERVAL_1_32: |
| transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_GUARD_32; |
| break; |
| case GUARD_INTERVAL_1_16: |
| transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_GUARD_16; |
| break; |
| case GUARD_INTERVAL_1_8: |
| transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_GUARD_8; |
| break; |
| } |
| |
| /* hierarchy */ |
| switch (state->props.hierarchy) { |
| case HIERARCHY_AUTO: |
| case HIERARCHY_NONE: |
| default: |
| operationMode |= OFDM_SC_RA_RAM_OP_AUTO_HIER__M; |
| /* fall through , try first guess SC_RA_RAM_OP_PARAM_HIER_NO */ |
| /* transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_HIER_NO; */ |
| /* break; */ |
| case HIERARCHY_1: |
| transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_HIER_A1; |
| break; |
| case HIERARCHY_2: |
| transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_HIER_A2; |
| break; |
| case HIERARCHY_4: |
| transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_HIER_A4; |
| break; |
| } |
| |
| |
| /* modulation */ |
| switch (state->props.modulation) { |
| case QAM_AUTO: |
| default: |
| operationMode |= OFDM_SC_RA_RAM_OP_AUTO_CONST__M; |
| /* fall through , try first guess DRX_CONSTELLATION_QAM64 */ |
| case QAM_64: |
| transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_CONST_QAM64; |
| break; |
| case QPSK: |
| transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_CONST_QPSK; |
| break; |
| case QAM_16: |
| transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_CONST_QAM16; |
| break; |
| } |
| #if 0 |
| /* No hierachical channels support in BDA */ |
| /* Priority (only for hierarchical channels) */ |
| switch (channel->priority) { |
| case DRX_PRIORITY_LOW: |
| transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_PRIO_LO; |
| WR16(devAddr, OFDM_EC_SB_PRIOR__A, |
| OFDM_EC_SB_PRIOR_LO); |
| break; |
| case DRX_PRIORITY_HIGH: |
| transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_PRIO_HI; |
| WR16(devAddr, OFDM_EC_SB_PRIOR__A, |
| OFDM_EC_SB_PRIOR_HI)); |
| break; |
| case DRX_PRIORITY_UNKNOWN: /* fall through */ |
| default: |
| status = -EINVAL; |
| goto error; |
| } |
| #else |
| /* Set Priorty high */ |
| transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_PRIO_HI; |
| status = write16(state, OFDM_EC_SB_PRIOR__A, OFDM_EC_SB_PRIOR_HI); |
| if (status < 0) |
| goto error; |
| #endif |
| |
| /* coderate */ |
| switch (state->props.code_rate_HP) { |
| case FEC_AUTO: |
| default: |
| operationMode |= OFDM_SC_RA_RAM_OP_AUTO_RATE__M; |
| /* fall through , try first guess DRX_CODERATE_2DIV3 */ |
| case FEC_2_3: |
| transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_RATE_2_3; |
| break; |
| case FEC_1_2: |
| transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_RATE_1_2; |
| break; |
| case FEC_3_4: |
| transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_RATE_3_4; |
| break; |
| case FEC_5_6: |
| transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_RATE_5_6; |
| break; |
| case FEC_7_8: |
| transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_RATE_7_8; |
| break; |
| } |
| |
| /* SAW filter selection: normaly not necesarry, but if wanted |
| the application can select a SAW filter via the driver by using UIOs */ |
| /* First determine real bandwidth (Hz) */ |
| /* Also set delay for impulse noise cruncher */ |
| /* Also set parameters for EC_OC fix, note EC_OC_REG_TMD_HIL_MAR is changed |
| by SC for fix for some 8K,1/8 guard but is restored by InitEC and ResetEC |
| functions */ |
| switch (state->props.bandwidth_hz) { |
| case 0: |
| state->props.bandwidth_hz = 8000000; |
| /* fall though */ |
| case 8000000: |
| bandwidth = DRXK_BANDWIDTH_8MHZ_IN_HZ; |
| status = write16(state, OFDM_SC_RA_RAM_SRMM_FIX_FACT_8K__A, 3052); |
| if (status < 0) |
| goto error; |
| /* cochannel protection for PAL 8 MHz */ |
| status = write16(state, OFDM_SC_RA_RAM_NI_INIT_8K_PER_LEFT__A, 7); |
| if (status < 0) |
| goto error; |
| status = write16(state, OFDM_SC_RA_RAM_NI_INIT_8K_PER_RIGHT__A, 7); |
| if (status < 0) |
| goto error; |
| status = write16(state, OFDM_SC_RA_RAM_NI_INIT_2K_PER_LEFT__A, 7); |
| if (status < 0) |
| goto error; |
| status = write16(state, OFDM_SC_RA_RAM_NI_INIT_2K_PER_RIGHT__A, 1); |
| if (status < 0) |
| goto error; |
| break; |
| case 7000000: |
| bandwidth = DRXK_BANDWIDTH_7MHZ_IN_HZ; |
| status = write16(state, OFDM_SC_RA_RAM_SRMM_FIX_FACT_8K__A, 3491); |
| if (status < 0) |
| goto error; |
| /* cochannel protection for PAL 7 MHz */ |
| status = write16(state, OFDM_SC_RA_RAM_NI_INIT_8K_PER_LEFT__A, 8); |
| if (status < 0) |
| goto error; |
| status = write16(state, OFDM_SC_RA_RAM_NI_INIT_8K_PER_RIGHT__A, 8); |
| if (status < 0) |
| goto error; |
| status = write16(state, OFDM_SC_RA_RAM_NI_INIT_2K_PER_LEFT__A, 4); |
| if (status < 0) |
| goto error; |
| status = write16(state, OFDM_SC_RA_RAM_NI_INIT_2K_PER_RIGHT__A, 1); |
| if (status < 0) |
| goto error; |
| break; |
| case 6000000: |
| bandwidth = DRXK_BANDWIDTH_6MHZ_IN_HZ; |
| status = write16(state, OFDM_SC_RA_RAM_SRMM_FIX_FACT_8K__A, 4073); |
| if (status < 0) |
| goto error; |
| /* cochannel protection for NTSC 6 MHz */ |
| status = write16(state, OFDM_SC_RA_RAM_NI_INIT_8K_PER_LEFT__A, 19); |
| if (status < 0) |
| goto error; |
| status = write16(state, OFDM_SC_RA_RAM_NI_INIT_8K_PER_RIGHT__A, 19); |
| if (status < 0) |
| goto error; |
| status = write16(state, OFDM_SC_RA_RAM_NI_INIT_2K_PER_LEFT__A, 14); |
| if (status < 0) |
| goto error; |
| status = write16(state, OFDM_SC_RA_RAM_NI_INIT_2K_PER_RIGHT__A, 1); |
| if (status < 0) |
| goto error; |
| break; |
| default: |
| status = -EINVAL; |
| goto error; |
| } |
| |
| if (iqmRcRateOfs == 0) { |
| /* Now compute IQM_RC_RATE_OFS |
| (((SysFreq/BandWidth)/2)/2) -1) * 2^23) |
| => |
| ((SysFreq / BandWidth) * (2^21)) - (2^23) |
| */ |
| /* (SysFreq / BandWidth) * (2^28) */ |
| /* assert (MAX(sysClk)/MIN(bandwidth) < 16) |
| => assert(MAX(sysClk) < 16*MIN(bandwidth)) |
| => assert(109714272 > 48000000) = true so Frac 28 can be used */ |
| iqmRcRateOfs = Frac28a((u32) |
| ((state->m_sysClockFreq * |
| 1000) / 3), bandwidth); |
| /* (SysFreq / BandWidth) * (2^21), rounding before truncating */ |
| if ((iqmRcRateOfs & 0x7fL) >= 0x40) |
| iqmRcRateOfs += 0x80L; |
| iqmRcRateOfs = iqmRcRateOfs >> 7; |
| /* ((SysFreq / BandWidth) * (2^21)) - (2^23) */ |
| iqmRcRateOfs = iqmRcRateOfs - (1 << 23); |
| } |
| |
| iqmRcRateOfs &= |
| ((((u32) IQM_RC_RATE_OFS_HI__M) << |
| IQM_RC_RATE_OFS_LO__W) | IQM_RC_RATE_OFS_LO__M); |
| status = write32(state, IQM_RC_RATE_OFS_LO__A, iqmRcRateOfs); |
| if (status < 0) |
| goto error; |
| |
| /* Bandwidth setting done */ |
| |
| #if 0 |
| status = DVBTSetFrequencyShift(demod, channel, tunerOffset); |
| if (status < 0) |
| goto error; |
| #endif |
| status = SetFrequencyShifter(state, IntermediateFreqkHz, tunerFreqOffset, true); |
| if (status < 0) |
| goto error; |
| |
| /*== Start SC, write channel settings to SC ===============================*/ |
| |
| /* Activate SCU to enable SCU commands */ |
| status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_ACTIVE); |
| if (status < 0) |
| goto error; |
| |
| /* Enable SC after setting all other parameters */ |
| status = write16(state, OFDM_SC_COMM_STATE__A, 0); |
| if (status < 0) |
| goto error; |
| status = write16(state, OFDM_SC_COMM_EXEC__A, 1); |
| if (status < 0) |
| goto error; |
| |
| |
| status = scu_command(state, SCU_RAM_COMMAND_STANDARD_OFDM | SCU_RAM_COMMAND_CMD_DEMOD_START, 0, NULL, 1, &cmdResult); |
| if (status < 0) |
| goto error; |
| |
| /* Write SC parameter registers, set all AUTO flags in operation mode */ |
| param1 = (OFDM_SC_RA_RAM_OP_AUTO_MODE__M | |
| OFDM_SC_RA_RAM_OP_AUTO_GUARD__M | |
| OFDM_SC_RA_RAM_OP_AUTO_CONST__M | |
| OFDM_SC_RA_RAM_OP_AUTO_HIER__M | |
| OFDM_SC_RA_RAM_OP_AUTO_RATE__M); |
| status = DVBTScCommand(state, OFDM_SC_RA_RAM_CMD_SET_PREF_PARAM, |
| 0, transmissionParams, param1, 0, 0, 0); |
| if (status < 0) |
| goto error; |
| |
| if (!state->m_DRXK_A3_ROM_CODE) |
| status = DVBTCtrlSetSqiSpeed(state, &state->m_sqiSpeed); |
| error: |
| if (status < 0) |
| printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); |
| |
| return status; |
| } |
| |
| |
| /*============================================================================*/ |
| |
| /** |
| * \brief Retreive lock status . |
| * \param demod Pointer to demodulator instance. |
| * \param lockStat Pointer to lock status structure. |
| * \return DRXStatus_t. |
| * |
| */ |
| static int GetDVBTLockStatus(struct drxk_state *state, u32 *pLockStatus) |
| { |
| int status; |
| const u16 mpeg_lock_mask = (OFDM_SC_RA_RAM_LOCK_MPEG__M | |
| OFDM_SC_RA_RAM_LOCK_FEC__M); |
| const u16 fec_lock_mask = (OFDM_SC_RA_RAM_LOCK_FEC__M); |
| const u16 demod_lock_mask = OFDM_SC_RA_RAM_LOCK_DEMOD__M; |
| |
| u16 ScRaRamLock = 0; |
| u16 ScCommExec = 0; |
| |
| dprintk(1, "\n"); |
| |
| *pLockStatus = NOT_LOCKED; |
| /* driver 0.9.0 */ |
| /* Check if SC is running */ |
| status = read16(state, OFDM_SC_COMM_EXEC__A, &ScCommExec); |
| if (status < 0) |
| goto end; |
| if (ScCommExec == OFDM_SC_COMM_EXEC_STOP) |
| goto end; |
| |
| status = read16(state, OFDM_SC_RA_RAM_LOCK__A, &ScRaRamLock); |
| if (status < 0) |
| goto end; |
| |
| if ((ScRaRamLock & mpeg_lock_mask) == mpeg_lock_mask) |
| *pLockStatus = MPEG_LOCK; |
| else if ((ScRaRamLock & fec_lock_mask) == fec_lock_mask) |
| *pLockStatus = FEC_LOCK; |
| else if ((ScRaRamLock & demod_lock_mask) == demod_lock_mask) |
| *pLockStatus = DEMOD_LOCK; |
| else if (ScRaRamLock & OFDM_SC_RA_RAM_LOCK_NODVBT__M) |
| *pLockStatus = NEVER_LOCK; |
| end: |
| if (status < 0) |
| printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); |
| |
| return status; |
| } |
| |
| static int PowerUpQAM(struct drxk_state *state) |
| { |
| enum DRXPowerMode powerMode = DRXK_POWER_DOWN_OFDM; |
| int status; |
| |
| dprintk(1, "\n"); |
| status = CtrlPowerMode(state, &powerMode); |
| if (status < 0) |
| printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); |
| |
| return status; |
| } |
| |
| |
| /** Power Down QAM */ |
| static int PowerDownQAM(struct drxk_state *state) |
| { |
| u16 data = 0; |
| u16 cmdResult; |
| int status = 0; |
| |
| dprintk(1, "\n"); |
| status = read16(state, SCU_COMM_EXEC__A, &data); |
| if (status < 0) |
| goto error; |
| if (data == SCU_COMM_EXEC_ACTIVE) { |
| /* |
| STOP demodulator |
| QAM and HW blocks |
| */ |
| /* stop all comstate->m_exec */ |
| status = write16(state, QAM_COMM_EXEC__A, QAM_COMM_EXEC_STOP); |
| if (status < 0) |
| goto error; |
| status = scu_command(state, SCU_RAM_COMMAND_STANDARD_QAM | SCU_RAM_COMMAND_CMD_DEMOD_STOP, 0, NULL, 1, &cmdResult); |
| if (status < 0) |
| goto error; |
| } |
| /* powerdown AFE */ |
| status = SetIqmAf(state, false); |
| |
| error: |
| if (status < 0) |
| printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); |
| |
| return status; |
| } |
| |
| /*============================================================================*/ |
| |
| /** |
| * \brief Setup of the QAM Measurement intervals for signal quality |
| * \param demod instance of demod. |
| * \param modulation current modulation. |
| * \return DRXStatus_t. |
| * |
| * NOTE: |
| * Take into account that for certain settings the errorcounters can overflow. |
| * The implementation does not check this. |
| * |
| */ |
| static int SetQAMMeasurement(struct drxk_state *state, |
| enum EDrxkConstellation modulation, |
| u32 symbolRate) |
| { |
| u32 fecBitsDesired = 0; /* BER accounting period */ |
| u32 fecRsPeriodTotal = 0; /* Total period */ |
| u16 fecRsPrescale = 0; /* ReedSolomon Measurement Prescale */ |
| u16 fecRsPeriod = 0; /* Value for corresponding I2C register */ |
| int status = 0; |
| |
| dprintk(1, "\n"); |
| |
| fecRsPrescale = 1; |
| /* fecBitsDesired = symbolRate [kHz] * |
| FrameLenght [ms] * |
| (modulation + 1) * |
| SyncLoss (== 1) * |
| ViterbiLoss (==1) |
| */ |
| switch (modulation) { |
| case DRX_CONSTELLATION_QAM16: |
| fecBitsDesired = 4 * symbolRate; |
| break; |
| case DRX_CONSTELLATION_QAM32: |
| fecBitsDesired = 5 * symbolRate; |
| break; |
| case DRX_CONSTELLATION_QAM64: |
| fecBitsDesired = 6 * symbolRate; |
| break; |
| case DRX_CONSTELLATION_QAM128: |
| fecBitsDesired = 7 * symbolRate; |
| break; |
| case DRX_CONSTELLATION_QAM256: |
| fecBitsDesired = 8 * symbolRate; |
| break; |
| default: |
| status = -EINVAL; |
| } |
| if (status < 0) |
| goto error; |
| |
| fecBitsDesired /= 1000; /* symbolRate [Hz] -> symbolRate [kHz] */ |
| fecBitsDesired *= 500; /* meas. period [ms] */ |
| |
| /* Annex A/C: bits/RsPeriod = 204 * 8 = 1632 */ |
| /* fecRsPeriodTotal = fecBitsDesired / 1632 */ |
| fecRsPeriodTotal = (fecBitsDesired / 1632UL) + 1; /* roughly ceil */ |
| |
| /* fecRsPeriodTotal = fecRsPrescale * fecRsPeriod */ |
| fecRsPrescale = 1 + (u16) (fecRsPeriodTotal >> 16); |
| if (fecRsPrescale == 0) { |
| /* Divide by zero (though impossible) */ |
| status = -EINVAL; |
| if (status < 0) |
| goto error; |
| } |
| fecRsPeriod = |
| ((u16) fecRsPeriodTotal + |
| (fecRsPrescale >> 1)) / fecRsPrescale; |
| |
| /* write corresponding registers */ |
| status = write16(state, FEC_RS_MEASUREMENT_PERIOD__A, fecRsPeriod); |
| if (status < 0) |
| goto error; |
| status = write16(state, FEC_RS_MEASUREMENT_PRESCALE__A, fecRsPrescale); |
| if (status < 0) |
| goto error; |
| status = write16(state, FEC_OC_SNC_FAIL_PERIOD__A, fecRsPeriod); |
| error: |
| if (status < 0) |
| printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); |
| return status; |
| } |
| |
| static int SetQAM16(struct drxk_state *state) |
| { |
| int status = 0; |
| |
| dprintk(1, "\n"); |
| /* QAM Equalizer Setup */ |
| /* Equalizer */ |
| status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD0__A, 13517); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD1__A, 13517); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD2__A, 13517); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD3__A, 13517); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD4__A, 13517); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD5__A, 13517); |
| if (status < 0) |
| goto error; |
| /* Decision Feedback Equalizer */ |
| status = write16(state, QAM_DQ_QUAL_FUN0__A, 2); |
| if (status < 0) |
| goto error; |
| status = write16(state, QAM_DQ_QUAL_FUN1__A, 2); |
| if (status < 0) |
| goto error; |
| status = write16(state, QAM_DQ_QUAL_FUN2__A, 2); |
| if (status < 0) |
| goto error; |
| status = write16(state, QAM_DQ_QUAL_FUN3__A, 2); |
| if (status < 0) |
| goto error; |
| status = write16(state, QAM_DQ_QUAL_FUN4__A, 2); |
| if (status < 0) |
| goto error; |
| status = write16(state, QAM_DQ_QUAL_FUN5__A, 0); |
| if (status < 0) |
| goto error; |
| |
| status = write16(state, QAM_SY_SYNC_HWM__A, 5); |
| if (status < 0) |
| goto error; |
| status = write16(state, QAM_SY_SYNC_AWM__A, 4); |
| if (status < 0) |
| goto error; |
| status = write16(state, QAM_SY_SYNC_LWM__A, 3); |
| if (status < 0) |
| goto error; |
| |
| /* QAM Slicer Settings */ |
| status = write16(state, SCU_RAM_QAM_SL_SIG_POWER__A, DRXK_QAM_SL_SIG_POWER_QAM16); |
| if (status < 0) |
| goto error; |
| |
| /* QAM Loop Controller Coeficients */ |
| status = write16(state, SCU_RAM_QAM_LC_CA_FINE__A, 15); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_CA_COARSE__A, 40); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_EP_FINE__A, 12); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_EP_MEDIUM__A, 24); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_EP_COARSE__A, 24); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_EI_FINE__A, 12); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_EI_MEDIUM__A, 16); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_EI_COARSE__A, 16); |
| if (status < 0) |
| goto error; |
| |
| status = write16(state, SCU_RAM_QAM_LC_CP_FINE__A, 5); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_CP_MEDIUM__A, 20); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_CP_COARSE__A, 80); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_CI_FINE__A, 5); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_CI_MEDIUM__A, 20); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_CI_COARSE__A, 50); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_CF_FINE__A, 16); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_CF_MEDIUM__A, 16); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_CF_COARSE__A, 32); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_CF1_FINE__A, 5); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_CF1_MEDIUM__A, 10); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_CF1_COARSE__A, 10); |
| if (status < 0) |
| goto error; |
| |
| |
| /* QAM State Machine (FSM) Thresholds */ |
| |
| status = write16(state, SCU_RAM_QAM_FSM_RTH__A, 140); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_FTH__A, 50); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_CTH__A, 95); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_PTH__A, 120); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_QTH__A, 230); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_MTH__A, 105); |
| if (status < 0) |
| goto error; |
| |
| status = write16(state, SCU_RAM_QAM_FSM_RATE_LIM__A, 40); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_COUNT_LIM__A, 4); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_FREQ_LIM__A, 24); |
| if (status < 0) |
| goto error; |
| |
| |
| /* QAM FSM Tracking Parameters */ |
| |
| status = write16(state, SCU_RAM_QAM_FSM_MEDIAN_AV_MULT__A, (u16) 16); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_RADIUS_AV_LIMIT__A, (u16) 220); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET1__A, (u16) 25); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET2__A, (u16) 6); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET3__A, (u16) -24); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET4__A, (u16) -65); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET5__A, (u16) -127); |
| if (status < 0) |
| goto error; |
| |
| error: |
| if (status < 0) |
| printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); |
| return status; |
| } |
| |
| /*============================================================================*/ |
| |
| /** |
| * \brief QAM32 specific setup |
| * \param demod instance of demod. |
| * \return DRXStatus_t. |
| */ |
| static int SetQAM32(struct drxk_state *state) |
| { |
| int status = 0; |
| |
| dprintk(1, "\n"); |
| |
| /* QAM Equalizer Setup */ |
| /* Equalizer */ |
| status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD0__A, 6707); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD1__A, 6707); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD2__A, 6707); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD3__A, 6707); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD4__A, 6707); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD5__A, 6707); |
| if (status < 0) |
| goto error; |
| |
| /* Decision Feedback Equalizer */ |
| status = write16(state, QAM_DQ_QUAL_FUN0__A, 3); |
| if (status < 0) |
| goto error; |
| status = write16(state, QAM_DQ_QUAL_FUN1__A, 3); |
| if (status < 0) |
| goto error; |
| status = write16(state, QAM_DQ_QUAL_FUN2__A, 3); |
| if (status < 0) |
| goto error; |
| status = write16(state, QAM_DQ_QUAL_FUN3__A, 3); |
| if (status < 0) |
| goto error; |
| status = write16(state, QAM_DQ_QUAL_FUN4__A, 3); |
| if (status < 0) |
| goto error; |
| status = write16(state, QAM_DQ_QUAL_FUN5__A, 0); |
| if (status < 0) |
| goto error; |
| |
| status = write16(state, QAM_SY_SYNC_HWM__A, 6); |
| if (status < 0) |
| goto error; |
| status = write16(state, QAM_SY_SYNC_AWM__A, 5); |
| if (status < 0) |
| goto error; |
| status = write16(state, QAM_SY_SYNC_LWM__A, 3); |
| if (status < 0) |
| goto error; |
| |
| /* QAM Slicer Settings */ |
| |
| status = write16(state, SCU_RAM_QAM_SL_SIG_POWER__A, DRXK_QAM_SL_SIG_POWER_QAM32); |
| if (status < 0) |
| goto error; |
| |
| |
| /* QAM Loop Controller Coeficients */ |
| |
| status = write16(state, SCU_RAM_QAM_LC_CA_FINE__A, 15); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_CA_COARSE__A, 40); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_EP_FINE__A, 12); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_EP_MEDIUM__A, 24); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_EP_COARSE__A, 24); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_EI_FINE__A, 12); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_EI_MEDIUM__A, 16); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_EI_COARSE__A, 16); |
| if (status < 0) |
| goto error; |
| |
| status = write16(state, SCU_RAM_QAM_LC_CP_FINE__A, 5); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_CP_MEDIUM__A, 20); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_CP_COARSE__A, 80); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_CI_FINE__A, 5); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_CI_MEDIUM__A, 20); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_CI_COARSE__A, 50); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_CF_FINE__A, 16); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_CF_MEDIUM__A, 16); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_CF_COARSE__A, 16); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_CF1_FINE__A, 5); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_CF1_MEDIUM__A, 10); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_CF1_COARSE__A, 0); |
| if (status < 0) |
| goto error; |
| |
| |
| /* QAM State Machine (FSM) Thresholds */ |
| |
| status = write16(state, SCU_RAM_QAM_FSM_RTH__A, 90); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_FTH__A, 50); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_CTH__A, 80); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_PTH__A, 100); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_QTH__A, 170); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_MTH__A, 100); |
| if (status < 0) |
| goto error; |
| |
| status = write16(state, SCU_RAM_QAM_FSM_RATE_LIM__A, 40); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_COUNT_LIM__A, 4); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_FREQ_LIM__A, 10); |
| if (status < 0) |
| goto error; |
| |
| |
| /* QAM FSM Tracking Parameters */ |
| |
| status = write16(state, SCU_RAM_QAM_FSM_MEDIAN_AV_MULT__A, (u16) 12); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_RADIUS_AV_LIMIT__A, (u16) 140); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET1__A, (u16) -8); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET2__A, (u16) -16); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET3__A, (u16) -26); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET4__A, (u16) -56); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET5__A, (u16) -86); |
| error: |
| if (status < 0) |
| printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); |
| return status; |
| } |
| |
| /*============================================================================*/ |
| |
| /** |
| * \brief QAM64 specific setup |
| * \param demod instance of demod. |
| * \return DRXStatus_t. |
| */ |
| static int SetQAM64(struct drxk_state *state) |
| { |
| int status = 0; |
| |
| dprintk(1, "\n"); |
| /* QAM Equalizer Setup */ |
| /* Equalizer */ |
| status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD0__A, 13336); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD1__A, 12618); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD2__A, 11988); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD3__A, 13809); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD4__A, 13809); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD5__A, 15609); |
| if (status < 0) |
| goto error; |
| |
| /* Decision Feedback Equalizer */ |
| status = write16(state, QAM_DQ_QUAL_FUN0__A, 4); |
| if (status < 0) |
| goto error; |
| status = write16(state, QAM_DQ_QUAL_FUN1__A, 4); |
| if (status < 0) |
| goto error; |
| status = write16(state, QAM_DQ_QUAL_FUN2__A, 4); |
| if (status < 0) |
| goto error; |
| status = write16(state, QAM_DQ_QUAL_FUN3__A, 4); |
| if (status < 0) |
| goto error; |
| status = write16(state, QAM_DQ_QUAL_FUN4__A, 3); |
| if (status < 0) |
| goto error; |
| status = write16(state, QAM_DQ_QUAL_FUN5__A, 0); |
| if (status < 0) |
| goto error; |
| |
| status = write16(state, QAM_SY_SYNC_HWM__A, 5); |
| if (status < 0) |
| goto error; |
| status = write16(state, QAM_SY_SYNC_AWM__A, 4); |
| if (status < 0) |
| goto error; |
| status = write16(state, QAM_SY_SYNC_LWM__A, 3); |
| if (status < 0) |
| goto error; |
| |
| /* QAM Slicer Settings */ |
| status = write16(state, SCU_RAM_QAM_SL_SIG_POWER__A, DRXK_QAM_SL_SIG_POWER_QAM64); |
| if (status < 0) |
| goto error; |
| |
| |
| /* QAM Loop Controller Coeficients */ |
| |
| status = write16(state, SCU_RAM_QAM_LC_CA_FINE__A, 15); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_CA_COARSE__A, 40); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_EP_FINE__A, 12); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_EP_MEDIUM__A, 24); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_EP_COARSE__A, 24); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_EI_FINE__A, 12); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_EI_MEDIUM__A, 16); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_EI_COARSE__A, 16); |
| if (status < 0) |
| goto error; |
| |
| status = write16(state, SCU_RAM_QAM_LC_CP_FINE__A, 5); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_CP_MEDIUM__A, 30); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_CP_COARSE__A, 100); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_CI_FINE__A, 5); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_CI_MEDIUM__A, 30); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_CI_COARSE__A, 50); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_CF_FINE__A, 16); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_CF_MEDIUM__A, 25); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_CF_COARSE__A, 48); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_CF1_FINE__A, 5); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_CF1_MEDIUM__A, 10); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_CF1_COARSE__A, 10); |
| if (status < 0) |
| goto error; |
| |
| |
| /* QAM State Machine (FSM) Thresholds */ |
| |
| status = write16(state, SCU_RAM_QAM_FSM_RTH__A, 100); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_FTH__A, 60); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_CTH__A, 80); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_PTH__A, 110); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_QTH__A, 200); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_MTH__A, 95); |
| if (status < 0) |
| goto error; |
| |
| status = write16(state, SCU_RAM_QAM_FSM_RATE_LIM__A, 40); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_COUNT_LIM__A, 4); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_FREQ_LIM__A, 15); |
| if (status < 0) |
| goto error; |
| |
| |
| /* QAM FSM Tracking Parameters */ |
| |
| status = write16(state, SCU_RAM_QAM_FSM_MEDIAN_AV_MULT__A, (u16) 12); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_RADIUS_AV_LIMIT__A, (u16) 141); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET1__A, (u16) 7); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET2__A, (u16) 0); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET3__A, (u16) -15); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET4__A, (u16) -45); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET5__A, (u16) -80); |
| error: |
| if (status < 0) |
| printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); |
| |
| return status; |
| } |
| |
| /*============================================================================*/ |
| |
| /** |
| * \brief QAM128 specific setup |
| * \param demod: instance of demod. |
| * \return DRXStatus_t. |
| */ |
| static int SetQAM128(struct drxk_state *state) |
| { |
| int status = 0; |
| |
| dprintk(1, "\n"); |
| /* QAM Equalizer Setup */ |
| /* Equalizer */ |
| status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD0__A, 6564); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD1__A, 6598); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD2__A, 6394); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD3__A, 6409); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD4__A, 6656); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD5__A, 7238); |
| if (status < 0) |
| goto error; |
| |
| /* Decision Feedback Equalizer */ |
| status = write16(state, QAM_DQ_QUAL_FUN0__A, 6); |
| if (status < 0) |
| goto error; |
| status = write16(state, QAM_DQ_QUAL_FUN1__A, 6); |
| if (status < 0) |
| goto error; |
| status = write16(state, QAM_DQ_QUAL_FUN2__A, 6); |
| if (status < 0) |
| goto error; |
| status = write16(state, QAM_DQ_QUAL_FUN3__A, 6); |
| if (status < 0) |
| goto error; |
| status = write16(state, QAM_DQ_QUAL_FUN4__A, 5); |
| if (status < 0) |
| goto error; |
| status = write16(state, QAM_DQ_QUAL_FUN5__A, 0); |
| if (status < 0) |
| goto error; |
| |
| status = write16(state, QAM_SY_SYNC_HWM__A, 6); |
| if (status < 0) |
| goto error; |
| status = write16(state, QAM_SY_SYNC_AWM__A, 5); |
| if (status < 0) |
| goto error; |
| status = write16(state, QAM_SY_SYNC_LWM__A, 3); |
| if (status < 0) |
| goto error; |
| |
| |
| /* QAM Slicer Settings */ |
| |
| status = write16(state, SCU_RAM_QAM_SL_SIG_POWER__A, DRXK_QAM_SL_SIG_POWER_QAM128); |
| if (status < 0) |
| goto error; |
| |
| |
| /* QAM Loop Controller Coeficients */ |
| |
| status = write16(state, SCU_RAM_QAM_LC_CA_FINE__A, 15); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_CA_COARSE__A, 40); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_EP_FINE__A, 12); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_EP_MEDIUM__A, 24); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_EP_COARSE__A, 24); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_EI_FINE__A, 12); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_EI_MEDIUM__A, 16); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_EI_COARSE__A, 16); |
| if (status < 0) |
| goto error; |
| |
| status = write16(state, SCU_RAM_QAM_LC_CP_FINE__A, 5); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_CP_MEDIUM__A, 40); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_CP_COARSE__A, 120); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_CI_FINE__A, 5); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_CI_MEDIUM__A, 40); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_CI_COARSE__A, 60); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_CF_FINE__A, 16); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_CF_MEDIUM__A, 25); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_CF_COARSE__A, 64); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_CF1_FINE__A, 5); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_CF1_MEDIUM__A, 10); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_CF1_COARSE__A, 0); |
| if (status < 0) |
| goto error; |
| |
| |
| /* QAM State Machine (FSM) Thresholds */ |
| |
| status = write16(state, SCU_RAM_QAM_FSM_RTH__A, 50); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_FTH__A, 60); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_CTH__A, 80); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_PTH__A, 100); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_QTH__A, 140); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_MTH__A, 100); |
| if (status < 0) |
| goto error; |
| |
| status = write16(state, SCU_RAM_QAM_FSM_RATE_LIM__A, 40); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_COUNT_LIM__A, 5); |
| if (status < 0) |
| goto error; |
| |
| status = write16(state, SCU_RAM_QAM_FSM_FREQ_LIM__A, 12); |
| if (status < 0) |
| goto error; |
| |
| /* QAM FSM Tracking Parameters */ |
| |
| status = write16(state, SCU_RAM_QAM_FSM_MEDIAN_AV_MULT__A, (u16) 8); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_RADIUS_AV_LIMIT__A, (u16) 65); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET1__A, (u16) 5); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET2__A, (u16) 3); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET3__A, (u16) -1); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET4__A, (u16) -12); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET5__A, (u16) -23); |
| error: |
| if (status < 0) |
| printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); |
| |
| return status; |
| } |
| |
| /*============================================================================*/ |
| |
| /** |
| * \brief QAM256 specific setup |
| * \param demod: instance of demod. |
| * \return DRXStatus_t. |
| */ |
| static int SetQAM256(struct drxk_state *state) |
| { |
| int status = 0; |
| |
| dprintk(1, "\n"); |
| /* QAM Equalizer Setup */ |
| /* Equalizer */ |
| status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD0__A, 11502); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD1__A, 12084); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD2__A, 12543); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD3__A, 12931); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD4__A, 13629); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD5__A, 15385); |
| if (status < 0) |
| goto error; |
| |
| /* Decision Feedback Equalizer */ |
| status = write16(state, QAM_DQ_QUAL_FUN0__A, 8); |
| if (status < 0) |
| goto error; |
| status = write16(state, QAM_DQ_QUAL_FUN1__A, 8); |
| if (status < 0) |
| goto error; |
| status = write16(state, QAM_DQ_QUAL_FUN2__A, 8); |
| if (status < 0) |
| goto error; |
| status = write16(state, QAM_DQ_QUAL_FUN3__A, 8); |
| if (status < 0) |
| goto error; |
| status = write16(state, QAM_DQ_QUAL_FUN4__A, 6); |
| if (status < 0) |
| goto error; |
| status = write16(state, QAM_DQ_QUAL_FUN5__A, 0); |
| if (status < 0) |
| goto error; |
| |
| status = write16(state, QAM_SY_SYNC_HWM__A, 5); |
| if (status < 0) |
| goto error; |
| status = write16(state, QAM_SY_SYNC_AWM__A, 4); |
| if (status < 0) |
| goto error; |
| status = write16(state, QAM_SY_SYNC_LWM__A, 3); |
| if (status < 0) |
| goto error; |
| |
| /* QAM Slicer Settings */ |
| |
| status = write16(state, SCU_RAM_QAM_SL_SIG_POWER__A, DRXK_QAM_SL_SIG_POWER_QAM256); |
| if (status < 0) |
| goto error; |
| |
| |
| /* QAM Loop Controller Coeficients */ |
| |
| status = write16(state, SCU_RAM_QAM_LC_CA_FINE__A, 15); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_CA_COARSE__A, 40); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_EP_FINE__A, 12); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_EP_MEDIUM__A, 24); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_EP_COARSE__A, 24); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_EI_FINE__A, 12); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_EI_MEDIUM__A, 16); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_EI_COARSE__A, 16); |
| if (status < 0) |
| goto error; |
| |
| status = write16(state, SCU_RAM_QAM_LC_CP_FINE__A, 5); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_CP_MEDIUM__A, 50); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_CP_COARSE__A, 250); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_CI_FINE__A, 5); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_CI_MEDIUM__A, 50); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_CI_COARSE__A, 125); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_CF_FINE__A, 16); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_CF_MEDIUM__A, 25); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_CF_COARSE__A, 48); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_CF1_FINE__A, 5); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_CF1_MEDIUM__A, 10); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_LC_CF1_COARSE__A, 10); |
| if (status < 0) |
| goto error; |
| |
| |
| /* QAM State Machine (FSM) Thresholds */ |
| |
| status = write16(state, SCU_RAM_QAM_FSM_RTH__A, 50); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_FTH__A, 60); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_CTH__A, 80); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_PTH__A, 100); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_QTH__A, 150); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_MTH__A, 110); |
| if (status < 0) |
| goto error; |
| |
| status = write16(state, SCU_RAM_QAM_FSM_RATE_LIM__A, 40); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_COUNT_LIM__A, 4); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_FREQ_LIM__A, 12); |
| if (status < 0) |
| goto error; |
| |
| |
| /* QAM FSM Tracking Parameters */ |
| |
| status = write16(state, SCU_RAM_QAM_FSM_MEDIAN_AV_MULT__A, (u16) 8); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_RADIUS_AV_LIMIT__A, (u16) 74); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET1__A, (u16) 18); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET2__A, (u16) 13); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET3__A, (u16) 7); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET4__A, (u16) 0); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET5__A, (u16) -8); |
| error: |
| if (status < 0) |
| printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); |
| return status; |
| } |
| |
| |
| /*============================================================================*/ |
| /** |
| * \brief Reset QAM block. |
| * \param demod: instance of demod. |
| * \param channel: pointer to channel data. |
| * \return DRXStatus_t. |
| */ |
| static int QAMResetQAM(struct drxk_state *state) |
| { |
| int status; |
| u16 cmdResult; |
| |
| dprintk(1, "\n"); |
| /* Stop QAM comstate->m_exec */ |
| status = write16(state, QAM_COMM_EXEC__A, QAM_COMM_EXEC_STOP); |
| if (status < 0) |
| goto error; |
| |
| status = scu_command(state, SCU_RAM_COMMAND_STANDARD_QAM | SCU_RAM_COMMAND_CMD_DEMOD_RESET, 0, NULL, 1, &cmdResult); |
| error: |
| if (status < 0) |
| printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); |
| return status; |
| } |
| |
| /*============================================================================*/ |
| |
| /** |
| * \brief Set QAM symbolrate. |
| * \param demod: instance of demod. |
| * \param channel: pointer to channel data. |
| * \return DRXStatus_t. |
| */ |
| static int QAMSetSymbolrate(struct drxk_state *state) |
| { |
| u32 adcFrequency = 0; |
| u32 symbFreq = 0; |
| u32 iqmRcRate = 0; |
| u16 ratesel = 0; |
| u32 lcSymbRate = 0; |
| int status; |
| |
| dprintk(1, "\n"); |
| /* Select & calculate correct IQM rate */ |
| adcFrequency = (state->m_sysClockFreq * 1000) / 3; |
| ratesel = 0; |
| /* printk(KERN_DEBUG "drxk: SR %d\n", state->props.symbol_rate); */ |
| if (state->props.symbol_rate <= 1188750) |
| ratesel = 3; |
| else if (state->props.symbol_rate <= 2377500) |
| ratesel = 2; |
| else if (state->props.symbol_rate <= 4755000) |
| ratesel = 1; |
| status = write16(state, IQM_FD_RATESEL__A, ratesel); |
| if (status < 0) |
| goto error; |
| |
| /* |
| IqmRcRate = ((Fadc / (symbolrate * (4<<ratesel))) - 1) * (1<<23) |
| */ |
| symbFreq = state->props.symbol_rate * (1 << ratesel); |
| if (symbFreq == 0) { |
| /* Divide by zero */ |
| status = -EINVAL; |
| goto error; |
| } |
| iqmRcRate = (adcFrequency / symbFreq) * (1 << 21) + |
| (Frac28a((adcFrequency % symbFreq), symbFreq) >> 7) - |
| (1 << 23); |
| status = write32(state, IQM_RC_RATE_OFS_LO__A, iqmRcRate); |
| if (status < 0) |
| goto error; |
| state->m_iqmRcRate = iqmRcRate; |
| /* |
| LcSymbFreq = round (.125 * symbolrate / adcFreq * (1<<15)) |
| */ |
| symbFreq = state->props.symbol_rate; |
| if (adcFrequency == 0) { |
| /* Divide by zero */ |
| status = -EINVAL; |
| goto error; |
| } |
| lcSymbRate = (symbFreq / adcFrequency) * (1 << 12) + |
| (Frac28a((symbFreq % adcFrequency), adcFrequency) >> |
| 16); |
| if (lcSymbRate > 511) |
| lcSymbRate = 511; |
| status = write16(state, QAM_LC_SYMBOL_FREQ__A, (u16) lcSymbRate); |
| |
| error: |
| if (status < 0) |
| printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); |
| return status; |
| } |
| |
| /*============================================================================*/ |
| |
| /** |
| * \brief Get QAM lock status. |
| * \param demod: instance of demod. |
| * \param channel: pointer to channel data. |
| * \return DRXStatus_t. |
| */ |
| |
| static int GetQAMLockStatus(struct drxk_state *state, u32 *pLockStatus) |
| { |
| int status; |
| u16 Result[2] = { 0, 0 }; |
| |
| dprintk(1, "\n"); |
| *pLockStatus = NOT_LOCKED; |
| status = scu_command(state, |
| SCU_RAM_COMMAND_STANDARD_QAM | |
| SCU_RAM_COMMAND_CMD_DEMOD_GET_LOCK, 0, NULL, 2, |
| Result); |
| if (status < 0) |
| printk(KERN_ERR "drxk: %s status = %08x\n", __func__, status); |
| |
| if (Result[1] < SCU_RAM_QAM_LOCKED_LOCKED_DEMOD_LOCKED) { |
| /* 0x0000 NOT LOCKED */ |
| } else if (Result[1] < SCU_RAM_QAM_LOCKED_LOCKED_LOCKED) { |
| /* 0x4000 DEMOD LOCKED */ |
| *pLockStatus = DEMOD_LOCK; |
| } else if (Result[1] < SCU_RAM_QAM_LOCKED_LOCKED_NEVER_LOCK) { |
| /* 0x8000 DEMOD + FEC LOCKED (system lock) */ |
| *pLockStatus = MPEG_LOCK; |
| } else { |
| /* 0xC000 NEVER LOCKED */ |
| /* (system will never be able to lock to the signal) */ |
| /* TODO: check this, intermediate & standard specific lock states are not |
| taken into account here */ |
| *pLockStatus = NEVER_LOCK; |
| } |
| return status; |
| } |
| |
| #define QAM_MIRROR__M 0x03 |
| #define QAM_MIRROR_NORMAL 0x00 |
| #define QAM_MIRRORED 0x01 |
| #define QAM_MIRROR_AUTO_ON 0x02 |
| #define QAM_LOCKRANGE__M 0x10 |
| #define QAM_LOCKRANGE_NORMAL 0x10 |
| |
| static int SetQAM(struct drxk_state *state, u16 IntermediateFreqkHz, |
| s32 tunerFreqOffset) |
| { |
| int status; |
| u16 setParamParameters[4] = { 0, 0, 0, 0 }; |
| u16 cmdResult; |
| |
| dprintk(1, "\n"); |
| /* |
| * STEP 1: reset demodulator |
| * resets FEC DI and FEC RS |
| * resets QAM block |
| * resets SCU variables |
| */ |
| status = write16(state, FEC_DI_COMM_EXEC__A, FEC_DI_COMM_EXEC_STOP); |
| if (status < 0) |
| goto error; |
| status = write16(state, FEC_RS_COMM_EXEC__A, FEC_RS_COMM_EXEC_STOP); |
| if (status < 0) |
| goto error; |
| status = QAMResetQAM(state); |
| if (status < 0) |
| goto error; |
| |
| /* |
| * STEP 2: configure demodulator |
| * -set params; resets IQM,QAM,FEC HW; initializes some |
| * SCU variables |
| */ |
| status = QAMSetSymbolrate(state); |
| if (status < 0) |
| goto error; |
| |
| /* Set params */ |
| switch (state->props.modulation) { |
| case QAM_256: |
| state->m_Constellation = DRX_CONSTELLATION_QAM256; |
| break; |
| case QAM_AUTO: |
| case QAM_64: |
| state->m_Constellation = DRX_CONSTELLATION_QAM64; |
| break; |
| case QAM_16: |
| state->m_Constellation = DRX_CONSTELLATION_QAM16; |
| break; |
| case QAM_32: |
| state->m_Constellation = DRX_CONSTELLATION_QAM32; |
| break; |
| case QAM_128: |
| state->m_Constellation = DRX_CONSTELLATION_QAM128; |
| break; |
| default: |
| status = -EINVAL; |
| break; |
| } |
| if (status < 0) |
| goto error; |
| setParamParameters[0] = state->m_Constellation; /* modulation */ |
| setParamParameters[1] = DRXK_QAM_I12_J17; /* interleave mode */ |
| if (state->m_OperationMode == OM_QAM_ITU_C) |
| setParamParameters[2] = QAM_TOP_ANNEX_C; |
| else |
| setParamParameters[2] = QAM_TOP_ANNEX_A; |
| setParamParameters[3] |= (QAM_MIRROR_AUTO_ON); |
| /* Env parameters */ |
| /* check for LOCKRANGE Extented */ |
| /* setParamParameters[3] |= QAM_LOCKRANGE_NORMAL; */ |
| |
| status = scu_command(state, SCU_RAM_COMMAND_STANDARD_QAM | SCU_RAM_COMMAND_CMD_DEMOD_SET_PARAM, 4, setParamParameters, 1, &cmdResult); |
| if (status < 0) { |
| /* Fall-back to the simpler call */ |
| if (state->m_OperationMode == OM_QAM_ITU_C) |
| setParamParameters[0] = QAM_TOP_ANNEX_C; |
| else |
| setParamParameters[0] = QAM_TOP_ANNEX_A; |
| status = scu_command(state, SCU_RAM_COMMAND_STANDARD_QAM | SCU_RAM_COMMAND_CMD_DEMOD_SET_ENV, 1, setParamParameters, 1, &cmdResult); |
| if (status < 0) |
| goto error; |
| |
| setParamParameters[0] = state->m_Constellation; /* modulation */ |
| setParamParameters[1] = DRXK_QAM_I12_J17; /* interleave mode */ |
| status = scu_command(state, SCU_RAM_COMMAND_STANDARD_QAM | SCU_RAM_COMMAND_CMD_DEMOD_SET_PARAM, 2, setParamParameters, 1, &cmdResult); |
| } |
| if (status < 0) |
| goto error; |
| |
| /* |
| * STEP 3: enable the system in a mode where the ADC provides valid |
| * signal setup modulation independent registers |
| */ |
| #if 0 |
| status = SetFrequency(channel, tunerFreqOffset)); |
| if (status < 0) |
| goto error; |
| #endif |
| status = SetFrequencyShifter(state, IntermediateFreqkHz, tunerFreqOffset, true); |
| if (status < 0) |
| goto error; |
| |
| /* Setup BER measurement */ |
| status = SetQAMMeasurement(state, state->m_Constellation, state->props.symbol_rate); |
| if (status < 0) |
| goto error; |
| |
| /* Reset default values */ |
| status = write16(state, IQM_CF_SCALE_SH__A, IQM_CF_SCALE_SH__PRE); |
| if (status < 0) |
| goto error; |
| status = write16(state, QAM_SY_TIMEOUT__A, QAM_SY_TIMEOUT__PRE); |
| if (status < 0) |
| goto error; |
| |
| /* Reset default LC values */ |
| status = write16(state, QAM_LC_RATE_LIMIT__A, 3); |
| if (status < 0) |
| goto error; |
| status = write16(state, QAM_LC_LPF_FACTORP__A, 4); |
| if (status < 0) |
| goto error; |
| status = write16(state, QAM_LC_LPF_FACTORI__A, 4); |
| if (status < 0) |
| goto error; |
| status = write16(state, QAM_LC_MODE__A, 7); |
| if (status < 0) |
| goto error; |
| |
| status = write16(state, QAM_LC_QUAL_TAB0__A, 1); |
| if (status < 0) |
| goto error; |
| status = write16(state, QAM_LC_QUAL_TAB1__A, 1); |
| if (status < 0) |
| goto error; |
| status = write16(state, QAM_LC_QUAL_TAB2__A, 1); |
| if (status < 0) |
| goto error; |
| status = write16(state, QAM_LC_QUAL_TAB3__A, 1); |
| if (status < 0) |
| goto error; |
| status = write16(state, QAM_LC_QUAL_TAB4__A, 2); |
| if (status < 0) |
| goto error; |
| status = write16(state, QAM_LC_QUAL_TAB5__A, 2); |
| if (status < 0) |
| goto error; |
| status = write16(state, QAM_LC_QUAL_TAB6__A, 2); |
| if (status < 0) |
| goto error; |
| status = write16(state, QAM_LC_QUAL_TAB8__A, 2); |
| if (status < 0) |
| goto error; |
| status = write16(state, QAM_LC_QUAL_TAB9__A, 2); |
| if (status < 0) |
| goto error; |
| status = write16(state, QAM_LC_QUAL_TAB10__A, 2); |
| if (status < 0) |
| goto error; |
| status = write16(state, QAM_LC_QUAL_TAB12__A, 2); |
| if (status < 0) |
| goto error; |
| status = write16(state, QAM_LC_QUAL_TAB15__A, 3); |
| if (status < 0) |
| goto error; |
| status = write16(state, QAM_LC_QUAL_TAB16__A, 3); |
| if (status < 0) |
| goto error; |
| status = write16(state, QAM_LC_QUAL_TAB20__A, 4); |
| if (status < 0) |
| goto error; |
| status = write16(state, QAM_LC_QUAL_TAB25__A, 4); |
| if (status < 0) |
| goto error; |
| |
| /* Mirroring, QAM-block starting point not inverted */ |
| status = write16(state, QAM_SY_SP_INV__A, QAM_SY_SP_INV_SPECTRUM_INV_DIS); |
| if (status < 0) |
| goto error; |
| |
| /* Halt SCU to enable safe non-atomic accesses */ |
| status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_HOLD); |
| if (status < 0) |
| goto error; |
| |
| /* STEP 4: modulation specific setup */ |
| switch (state->props.modulation) { |
| case QAM_16: |
| status = SetQAM16(state); |
| break; |
| case QAM_32: |
| status = SetQAM32(state); |
| break; |
| case QAM_AUTO: |
| case QAM_64: |
| status = SetQAM64(state); |
| break; |
| case QAM_128: |
| status = SetQAM128(state); |
| break; |
| case QAM_256: |
| status = SetQAM256(state); |
| break; |
| default: |
| status = -EINVAL; |
| break; |
| } |
| if (status < 0) |
| goto error; |
| |
| /* Activate SCU to enable SCU commands */ |
| status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_ACTIVE); |
| if (status < 0) |
| goto error; |
| |
| /* Re-configure MPEG output, requires knowledge of channel bitrate */ |
| /* extAttr->currentChannel.modulation = channel->modulation; */ |
| /* extAttr->currentChannel.symbolrate = channel->symbolrate; */ |
| status = MPEGTSDtoSetup(state, state->m_OperationMode); |
| if (status < 0) |
| goto error; |
| |
| /* Start processes */ |
| status = MPEGTSStart(state); |
| if (status < 0) |
| goto error; |
| status = write16(state, FEC_COMM_EXEC__A, FEC_COMM_EXEC_ACTIVE); |
| if (status < 0) |
| goto error; |
| status = write16(state, QAM_COMM_EXEC__A, QAM_COMM_EXEC_ACTIVE); |
| if (status < 0) |
| goto error; |
| status = write16(state, IQM_COMM_EXEC__A, IQM_COMM_EXEC_B_ACTIVE); |
| if (status < 0) |
| goto error; |
| |
| /* STEP 5: start QAM demodulator (starts FEC, QAM and IQM HW) */ |
| status = scu_command(state, SCU_RAM_COMMAND_STANDARD_QAM | SCU_RAM_COMMAND_CMD_DEMOD_START, 0, NULL, 1, &cmdResult); |
| if (status < 0) |
| goto error; |
| |
| /* update global DRXK data container */ |
| /*? extAttr->qamInterleaveMode = DRXK_QAM_I12_J17; */ |
| |
| error: |
| if (status < 0) |
| printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); |
| return status; |
| } |
| |
| static int SetQAMStandard(struct drxk_state *state, |
| enum OperationMode oMode) |
| { |
| int status; |
| #ifdef DRXK_QAM_TAPS |
| #define DRXK_QAMA_TAPS_SELECT |
| #include "drxk_filters.h" |
| #undef DRXK_QAMA_TAPS_SELECT |
| #endif |
| |
| dprintk(1, "\n"); |
| |
| /* added antenna switch */ |
| SwitchAntennaToQAM(state); |
| |
| /* Ensure correct power-up mode */ |
| status = PowerUpQAM(state); |
| if (status < 0) |
| goto error; |
| /* Reset QAM block */ |
| status = QAMResetQAM(state); |
| if (status < 0) |
| goto error; |
| |
| /* Setup IQM */ |
| |
| status = write16(state, IQM_COMM_EXEC__A, IQM_COMM_EXEC_B_STOP); |
| if (status < 0) |
| goto error; |
| status = write16(state, IQM_AF_AMUX__A, IQM_AF_AMUX_SIGNAL2ADC); |
| if (status < 0) |
| goto error; |
| |
| /* Upload IQM Channel Filter settings by |
| boot loader from ROM table */ |
| switch (oMode) { |
| case OM_QAM_ITU_A: |
| status = BLChainCmd(state, DRXK_BL_ROM_OFFSET_TAPS_ITU_A, DRXK_BLCC_NR_ELEMENTS_TAPS, DRXK_BLC_TIMEOUT); |
| break; |
| case OM_QAM_ITU_C: |
| status = BLDirectCmd(state, IQM_CF_TAP_RE0__A, DRXK_BL_ROM_OFFSET_TAPS_ITU_C, DRXK_BLDC_NR_ELEMENTS_TAPS, DRXK_BLC_TIMEOUT); |
| if (status < 0) |
| goto error; |
| status = BLDirectCmd(state, IQM_CF_TAP_IM0__A, DRXK_BL_ROM_OFFSET_TAPS_ITU_C, DRXK_BLDC_NR_ELEMENTS_TAPS, DRXK_BLC_TIMEOUT); |
| break; |
| default: |
| status = -EINVAL; |
| } |
| if (status < 0) |
| goto error; |
| |
| status = write16(state, IQM_CF_OUT_ENA__A, (1 << IQM_CF_OUT_ENA_QAM__B)); |
| if (status < 0) |
| goto error; |
| status = write16(state, IQM_CF_SYMMETRIC__A, 0); |
| if (status < 0) |
| goto error; |
| status = write16(state, IQM_CF_MIDTAP__A, ((1 << IQM_CF_MIDTAP_RE__B) | (1 << IQM_CF_MIDTAP_IM__B))); |
| if (status < 0) |
| goto error; |
| |
| status = write16(state, IQM_RC_STRETCH__A, 21); |
| if (status < 0) |
| goto error; |
| status = write16(state, IQM_AF_CLP_LEN__A, 0); |
| if (status < 0) |
| goto error; |
| status = write16(state, IQM_AF_CLP_TH__A, 448); |
| if (status < 0) |
| goto error; |
| status = write16(state, IQM_AF_SNS_LEN__A, 0); |
| if (status < 0) |
| goto error; |
| status = write16(state, IQM_CF_POW_MEAS_LEN__A, 0); |
| if (status < 0) |
| goto error; |
| |
| status = write16(state, IQM_FS_ADJ_SEL__A, 1); |
| if (status < 0) |
| goto error; |
| status = write16(state, IQM_RC_ADJ_SEL__A, 1); |
| if (status < 0) |
| goto error; |
| status = write16(state, IQM_CF_ADJ_SEL__A, 1); |
| if (status < 0) |
| goto error; |
| status = write16(state, IQM_AF_UPD_SEL__A, 0); |
| if (status < 0) |
| goto error; |
| |
| /* IQM Impulse Noise Processing Unit */ |
| status = write16(state, IQM_CF_CLP_VAL__A, 500); |
| if (status < 0) |
| goto error; |
| status = write16(state, IQM_CF_DATATH__A, 1000); |
| if (status < 0) |
| goto error; |
| status = write16(state, IQM_CF_BYPASSDET__A, 1); |
| if (status < 0) |
| goto error; |
| status = write16(state, IQM_CF_DET_LCT__A, 0); |
| if (status < 0) |
| goto error; |
| status = write16(state, IQM_CF_WND_LEN__A, 1); |
| if (status < 0) |
| goto error; |
| status = write16(state, IQM_CF_PKDTH__A, 1); |
| if (status < 0) |
| goto error; |
| status = write16(state, IQM_AF_INC_BYPASS__A, 1); |
| if (status < 0) |
| goto error; |
| |
| /* turn on IQMAF. Must be done before setAgc**() */ |
| status = SetIqmAf(state, true); |
| if (status < 0) |
| goto error; |
| status = write16(state, IQM_AF_START_LOCK__A, 0x01); |
| if (status < 0) |
| goto error; |
| |
| /* IQM will not be reset from here, sync ADC and update/init AGC */ |
| status = ADCSynchronization(state); |
| if (status < 0) |
| goto error; |
| |
| /* Set the FSM step period */ |
| status = write16(state, SCU_RAM_QAM_FSM_STEP_PERIOD__A, 2000); |
| if (status < 0) |
| goto error; |
| |
| /* Halt SCU to enable safe non-atomic accesses */ |
| status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_HOLD); |
| if (status < 0) |
| goto error; |
| |
| /* No more resets of the IQM, current standard correctly set => |
| now AGCs can be configured. */ |
| |
| status = InitAGC(state, true); |
| if (status < 0) |
| goto error; |
| status = SetPreSaw(state, &(state->m_qamPreSawCfg)); |
| if (status < 0) |
| goto error; |
| |
| /* Configure AGC's */ |
| status = SetAgcRf(state, &(state->m_qamRfAgcCfg), true); |
| if (status < 0) |
| goto error; |
| status = SetAgcIf(state, &(state->m_qamIfAgcCfg), true); |
| if (status < 0) |
| goto error; |
| |
| /* Activate SCU to enable SCU commands */ |
| status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_ACTIVE); |
| error: |
| if (status < 0) |
| printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); |
| return status; |
| } |
| |
| static int WriteGPIO(struct drxk_state *state) |
| { |
| int status; |
| u16 value = 0; |
| |
| dprintk(1, "\n"); |
| /* stop lock indicator process */ |
| status = write16(state, SCU_RAM_GPIO__A, SCU_RAM_GPIO_HW_LOCK_IND_DISABLE); |
| if (status < 0) |
| goto error; |
| |
| /* Write magic word to enable pdr reg write */ |
| status = write16(state, SIO_TOP_COMM_KEY__A, SIO_TOP_COMM_KEY_KEY); |
| if (status < 0) |
| goto error; |
| |
| if (state->m_hasSAWSW) { |
| if (state->UIO_mask & 0x0001) { /* UIO-1 */ |
| /* write to io pad configuration register - output mode */ |
| status = write16(state, SIO_PDR_SMA_TX_CFG__A, state->m_GPIOCfg); |
| if (status < 0) |
| goto error; |
| |
| /* use corresponding bit in io data output registar */ |
| status = read16(state, SIO_PDR_UIO_OUT_LO__A, &value); |
| if (status < 0) |
| goto error; |
| if ((state->m_GPIO & 0x0001) == 0) |
| value &= 0x7FFF; /* write zero to 15th bit - 1st UIO */ |
| else |
| value |= 0x8000; /* write one to 15th bit - 1st UIO */ |
| /* write back to io data output register */ |
| status = write16(state, SIO_PDR_UIO_OUT_LO__A, value); |
| if (status < 0) |
| goto error; |
| } |
| if (state->UIO_mask & 0x0002) { /* UIO-2 */ |
| /* write to io pad configuration register - output mode */ |
| status = write16(state, SIO_PDR_SMA_RX_CFG__A, state->m_GPIOCfg); |
| if (status < 0) |
| goto error; |
| |
| /* use corresponding bit in io data output registar */ |
| status = read16(state, SIO_PDR_UIO_OUT_LO__A, &value); |
| if (status < 0) |
| goto error; |
| if ((state->m_GPIO & 0x0002) == 0) |
| value &= 0xBFFF; /* write zero to 14th bit - 2st UIO */ |
| else |
| value |= 0x4000; /* write one to 14th bit - 2st UIO */ |
| /* write back to io data output register */ |
| status = write16(state, SIO_PDR_UIO_OUT_LO__A, value); |
| if (status < 0) |
| goto error; |
| } |
| if (state->UIO_mask & 0x0004) { /* UIO-3 */ |
| /* write to io pad configuration register - output mode */ |
| status = write16(state, SIO_PDR_GPIO_CFG__A, state->m_GPIOCfg); |
| if (status < 0) |
| goto error; |
| |
| /* use corresponding bit in io data output registar */ |
| status = read16(state, SIO_PDR_UIO_OUT_LO__A, &value); |
| if (status < 0) |
| goto error; |
| if ((state->m_GPIO & 0x0004) == 0) |
| value &= 0xFFFB; /* write zero to 2nd bit - 3rd UIO */ |
| else |
| value |= 0x0004; /* write one to 2nd bit - 3rd UIO */ |
| /* write back to io data output register */ |
| status = write16(state, SIO_PDR_UIO_OUT_LO__A, value); |
| if (status < 0) |
| goto error; |
| } |
| } |
| /* Write magic word to disable pdr reg write */ |
| status = write16(state, SIO_TOP_COMM_KEY__A, 0x0000); |
| error: |
| if (status < 0) |
| printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); |
| return status; |
| } |
| |
| static int SwitchAntennaToQAM(struct drxk_state *state) |
| { |
| int status = 0; |
| bool gpio_state; |
| |
| dprintk(1, "\n"); |
| |
| if (!state->antenna_gpio) |
| return 0; |
| |
| gpio_state = state->m_GPIO & state->antenna_gpio; |
| |
| if (state->antenna_dvbt ^ gpio_state) { |
| /* Antenna is on DVB-T mode. Switch */ |
| if (state->antenna_dvbt) |
| state->m_GPIO &= ~state->antenna_gpio; |
| else |
| state->m_GPIO |= state->antenna_gpio; |
| status = WriteGPIO(state); |
| } |
| if (status < 0) |
| printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); |
| return status; |
| } |
| |
| static int SwitchAntennaToDVBT(struct drxk_state *state) |
| { |
| int status = 0; |
| bool gpio_state; |
| |
| dprintk(1, "\n"); |
| |
| if (!state->antenna_gpio) |
| return 0; |
| |
| gpio_state = state->m_GPIO & state->antenna_gpio; |
| |
| if (!(state->antenna_dvbt ^ gpio_state)) { |
| /* Antenna is on DVB-C mode. Switch */ |
| if (state->antenna_dvbt) |
| state->m_GPIO |= state->antenna_gpio; |
| else |
| state->m_GPIO &= ~state->antenna_gpio; |
| status = WriteGPIO(state); |
| } |
| if (status < 0) |
| printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); |
| return status; |
| } |
| |
| |
| static int PowerDownDevice(struct drxk_state *state) |
| { |
| /* Power down to requested mode */ |
| /* Backup some register settings */ |
| /* Set pins with possible pull-ups connected to them in input mode */ |
| /* Analog power down */ |
| /* ADC power down */ |
| /* Power down device */ |
| int status; |
| |
| dprintk(1, "\n"); |
| if (state->m_bPDownOpenBridge) { |
| /* Open I2C bridge before power down of DRXK */ |
| status = ConfigureI2CBridge(state, true); |
| if (status < 0) |
| goto error; |
| } |
| /* driver 0.9.0 */ |
| status = DVBTEnableOFDMTokenRing(state, false); |
| if (status < 0) |
| goto error; |
| |
| status = write16(state, SIO_CC_PWD_MODE__A, SIO_CC_PWD_MODE_LEVEL_CLOCK); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_CC_UPDATE__A, SIO_CC_UPDATE_KEY); |
| if (status < 0) |
| goto error; |
| state->m_HICfgCtrl |= SIO_HI_RA_RAM_PAR_5_CFG_SLEEP_ZZZ; |
| status = HI_CfgCommand(state); |
| error: |
| if (status < 0) |
| printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); |
| |
| return status; |
| } |
| |
| static int load_microcode(struct drxk_state *state, const char *mc_name) |
| { |
| const struct firmware *fw = NULL; |
| int err = 0; |
| |
| dprintk(1, "\n"); |
| |
| err = request_firmware(&fw, mc_name, state->i2c->dev.parent); |
| if (err < 0) { |
| printk(KERN_ERR |
| "drxk: Could not load firmware file %s.\n", mc_name); |
| printk(KERN_INFO |
| "drxk: Copy %s to your hotplug directory!\n", mc_name); |
| return err; |
| } |
| err = DownloadMicrocode(state, fw->data, fw->size); |
| release_firmware(fw); |
| return err; |
| } |
| |
| static int init_drxk(struct drxk_state *state) |
| { |
| int status = 0; |
| enum DRXPowerMode powerMode = DRXK_POWER_DOWN_OFDM; |
| u16 driverVersion; |
| |
| dprintk(1, "\n"); |
| if ((state->m_DrxkState == DRXK_UNINITIALIZED)) { |
| status = PowerUpDevice(state); |
| if (status < 0) |
| goto error; |
| status = DRXX_Open(state); |
| if (status < 0) |
| goto error; |
| /* Soft reset of OFDM-, sys- and osc-clockdomain */ |
| status = write16(state, SIO_CC_SOFT_RST__A, SIO_CC_SOFT_RST_OFDM__M | SIO_CC_SOFT_RST_SYS__M | SIO_CC_SOFT_RST_OSC__M); |
| if (status < 0) |
| goto error; |
| status = write16(state, SIO_CC_UPDATE__A, SIO_CC_UPDATE_KEY); |
| if (status < 0) |
| goto error; |
| /* TODO is this needed, if yes how much delay in worst case scenario */ |
| msleep(1); |
| state->m_DRXK_A3_PATCH_CODE = true; |
| status = GetDeviceCapabilities(state); |
| if (status < 0) |
| goto error; |
| |
| /* Bridge delay, uses oscilator clock */ |
| /* Delay = (delay (nano seconds) * oscclk (kHz))/ 1000 */ |
| /* SDA brdige delay */ |
| state->m_HICfgBridgeDelay = |
| (u16) ((state->m_oscClockFreq / 1000) * |
| HI_I2C_BRIDGE_DELAY) / 1000; |
| /* Clipping */ |
| if (state->m_HICfgBridgeDelay > |
| SIO_HI_RA_RAM_PAR_3_CFG_DBL_SDA__M) { |
| state->m_HICfgBridgeDelay = |
| SIO_HI_RA_RAM_PAR_3_CFG_DBL_SDA__M; |
| } |
| /* SCL bridge delay, same as SDA for now */ |
| state->m_HICfgBridgeDelay += |
| state->m_HICfgBridgeDelay << |
| SIO_HI_RA_RAM_PAR_3_CFG_DBL_SCL__B; |
| |
| status = InitHI(state); |
| if (status < 0) |
| goto error; |
| /* disable various processes */ |
| #if NOA1ROM |
| if (!(state->m_DRXK_A1_ROM_CODE) |
| && !(state->m_DRXK_A2_ROM_CODE)) |
| #endif |
| { |
| status = write16(state, SCU_RAM_GPIO__A, SCU_RAM_GPIO_HW_LOCK_IND_DISABLE); |
| if (status < 0) |
| goto error; |
| } |
| |
| /* disable MPEG port */ |
| status = MPEGTSDisable(state); |
| if (status < 0) |
| goto error; |
| |
| /* Stop AUD and SCU */ |
| status = write16(state, AUD_COMM_EXEC__A, AUD_COMM_EXEC_STOP); |
| if (status < 0) |
| goto error; |
| status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_STOP); |
| if (status < 0) |
| goto error; |
| |
| /* enable token-ring bus through OFDM block for possible ucode upload */ |
| status = write16(state, SIO_OFDM_SH_OFDM_RING_ENABLE__A, SIO_OFDM_SH_OFDM_RING_ENABLE_ON); |
| if (status < 0) |
| goto error; |
| |
| /* include boot loader section */ |
| status = write16(state, SIO_BL_COMM_EXEC__A, SIO_BL_COMM_EXEC_ACTIVE); |
| if (status < 0) |
| goto error; |
| status = BLChainCmd(state, 0, 6, 100); |
| if (status < 0) |
| goto error; |
| |
| if (state->microcode_name) |
| load_microcode(state, state->microcode_name); |
| |
| /* disable token-ring bus through OFDM block for possible ucode upload */ |
| status = write16(state, SIO_OFDM_SH_OFDM_RING_ENABLE__A, SIO_OFDM_SH_OFDM_RING_ENABLE_OFF); |
| if (status < 0) |
| goto error; |
| |
| /* Run SCU for a little while to initialize microcode version numbers */ |
| status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_ACTIVE); |
| if (status < 0) |
| goto error; |
| status = DRXX_Open(state); |
| if (status < 0) |
| goto error; |
| /* added for test */ |
| msleep(30); |
| |
| powerMode = DRXK_POWER_DOWN_OFDM; |
| status = CtrlPowerMode(state, &powerMode); |
| if (status < 0) |
| goto error; |
| |
| /* Stamp driver version number in SCU data RAM in BCD code |
| Done to enable field application engineers to retreive drxdriver version |
| via I2C from SCU RAM. |
| Not using SCU command interface for SCU register access since no |
| microcode may be present. |
| */ |
| driverVersion = |
| (((DRXK_VERSION_MAJOR / 100) % 10) << 12) + |
| (((DRXK_VERSION_MAJOR / 10) % 10) << 8) + |
| ((DRXK_VERSION_MAJOR % 10) << 4) + |
| (DRXK_VERSION_MINOR % 10); |
| status = write16(state, SCU_RAM_DRIVER_VER_HI__A, driverVersion); |
| if (status < 0) |
| goto error; |
| driverVersion = |
| (((DRXK_VERSION_PATCH / 1000) % 10) << 12) + |
| (((DRXK_VERSION_PATCH / 100) % 10) << 8) + |
| (((DRXK_VERSION_PATCH / 10) % 10) << 4) + |
| (DRXK_VERSION_PATCH % 10); |
| status = write16(state, SCU_RAM_DRIVER_VER_LO__A, driverVersion); |
| if (status < 0) |
| goto error; |
| |
| printk(KERN_INFO "DRXK driver version %d.%d.%d\n", |
| DRXK_VERSION_MAJOR, DRXK_VERSION_MINOR, |
| DRXK_VERSION_PATCH); |
| |
| /* Dirty fix of default values for ROM/PATCH microcode |
| Dirty because this fix makes it impossible to setup suitable values |
| before calling DRX_Open. This solution requires changes to RF AGC speed |
| to be done via the CTRL function after calling DRX_Open */ |
| |
| /* m_dvbtRfAgcCfg.speed = 3; */ |
| |
| /* Reset driver debug flags to 0 */ |
| status = write16(state, SCU_RAM_DRIVER_DEBUG__A, 0); |
| if (status < 0) |
| goto error; |
| /* driver 0.9.0 */ |
| /* Setup FEC OC: |
| NOTE: No more full FEC resets allowed afterwards!! */ |
| status = write16(state, FEC_COMM_EXEC__A, FEC_COMM_EXEC_STOP); |
| if (status < 0) |
| goto error; |
| /* MPEGTS functions are still the same */ |
| status = MPEGTSDtoInit(state); |
| if (status < 0) |
| goto error; |
| status = MPEGTSStop(state); |
| if (status < 0) |
| goto error; |
| status = MPEGTSConfigurePolarity(state); |
| if (status < 0) |
| goto error; |
| status = MPEGTSConfigurePins(state, state->m_enableMPEGOutput); |
| if (status < 0) |
| goto error; |
| /* added: configure GPIO */ |
| status = WriteGPIO(state); |
| if (status < 0) |
| goto error; |
| |
| state->m_DrxkState = DRXK_STOPPED; |
| |
| if (state->m_bPowerDown) { |
| status = PowerDownDevice(state); |
| if (status < 0) |
| goto error; |
| state->m_DrxkState = DRXK_POWERED_DOWN; |
| } else |
| state->m_DrxkState = DRXK_STOPPED; |
| } |
| error: |
| if (status < 0) |
| printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); |
| |
| return status; |
| } |
| |
| static void drxk_release(struct dvb_frontend *fe) |
| { |
| struct drxk_state *state = fe->demodulator_priv; |
| |
| dprintk(1, "\n"); |
| kfree(state); |
| } |
| |
| static int drxk_sleep(struct dvb_frontend *fe) |
| { |
| struct drxk_state *state = fe->demodulator_priv; |
| |
| dprintk(1, "\n"); |
| ShutDown(state); |
| return 0; |
| } |
| |
| static int drxk_gate_ctrl(struct dvb_frontend *fe, int enable) |
| { |
| struct drxk_state *state = fe->demodulator_priv; |
| |
| dprintk(1, "%s\n", enable ? "enable" : "disable"); |
| return ConfigureI2CBridge(state, enable ? true : false); |
| } |
| |
| static int drxk_set_parameters(struct dvb_frontend *fe) |
| { |
| struct dtv_frontend_properties *p = &fe->dtv_property_cache; |
| u32 delsys = p->delivery_system, old_delsys; |
| struct drxk_state *state = fe->demodulator_priv; |
| u32 IF; |
| |
| dprintk(1, "\n"); |
| |
| if (!fe->ops.tuner_ops.get_if_frequency) { |
| printk(KERN_ERR |
| "drxk: Error: get_if_frequency() not defined at tuner. Can't work without it!\n"); |
| return -EINVAL; |
| } |
| |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 1); |
| if (fe->ops.tuner_ops.set_params) |
| fe->ops.tuner_ops.set_params(fe); |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 0); |
| |
| old_delsys = state->props.delivery_system; |
| state->props = *p; |
| |
| if (old_delsys != delsys) { |
| ShutDown(state); |
| switch (delsys) { |
| case SYS_DVBC_ANNEX_A: |
| case SYS_DVBC_ANNEX_C: |
| if (!state->m_hasDVBC) |
| return -EINVAL; |
| state->m_itut_annex_c = (delsys == SYS_DVBC_ANNEX_C) ? true : false; |
| if (state->m_itut_annex_c) |
| SetOperationMode(state, OM_QAM_ITU_C); |
| else |
| SetOperationMode(state, OM_QAM_ITU_A); |
| break; |
| case SYS_DVBT: |
| if (!state->m_hasDVBT) |
| return -EINVAL; |
| SetOperationMode(state, OM_DVBT); |
| break; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| fe->ops.tuner_ops.get_if_frequency(fe, &IF); |
| Start(state, 0, IF); |
| |
| /* printk(KERN_DEBUG "drxk: %s IF=%d done\n", __func__, IF); */ |
| |
| return 0; |
| } |
| |
| static int drxk_read_status(struct dvb_frontend *fe, fe_status_t *status) |
| { |
| struct drxk_state *state = fe->demodulator_priv; |
| u32 stat; |
| |
| dprintk(1, "\n"); |
| *status = 0; |
| GetLockStatus(state, &stat, 0); |
| if (stat == MPEG_LOCK) |
| *status |= 0x1f; |
| if (stat == FEC_LOCK) |
| *status |= 0x0f; |
| if (stat == DEMOD_LOCK) |
| *status |= 0x07; |
| return 0; |
| } |
| |
| static int drxk_read_ber(struct dvb_frontend *fe, u32 *ber) |
| { |
| dprintk(1, "\n"); |
| |
| *ber = 0; |
| return 0; |
| } |
| |
| static int drxk_read_signal_strength(struct dvb_frontend *fe, |
| u16 *strength) |
| { |
| struct drxk_state *state = fe->demodulator_priv; |
| u32 val = 0; |
| |
| dprintk(1, "\n"); |
| ReadIFAgc(state, &val); |
| *strength = val & 0xffff; |
| return 0; |
| } |
| |
| static int drxk_read_snr(struct dvb_frontend *fe, u16 *snr) |
| { |
| struct drxk_state *state = fe->demodulator_priv; |
| s32 snr2; |
| |
| dprintk(1, "\n"); |
| GetSignalToNoise(state, &snr2); |
| *snr = snr2 & 0xffff; |
| return 0; |
| } |
| |
| static int drxk_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) |
| { |
| struct drxk_state *state = fe->demodulator_priv; |
| u16 err; |
| |
| dprintk(1, "\n"); |
| DVBTQAMGetAccPktErr(state, &err); |
| *ucblocks = (u32) err; |
| return 0; |
| } |
| |
| static int drxk_get_tune_settings(struct dvb_frontend *fe, struct dvb_frontend_tune_settings |
| *sets) |
| { |
| struct dtv_frontend_properties *p = &fe->dtv_property_cache; |
| |
| dprintk(1, "\n"); |
| switch (p->delivery_system) { |
| case SYS_DVBC_ANNEX_A: |
| case SYS_DVBC_ANNEX_C: |
| case SYS_DVBT: |
| sets->min_delay_ms = 3000; |
| sets->max_drift = 0; |
| sets->step_size = 0; |
| return 0; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static struct dvb_frontend_ops drxk_ops = { |
| /* .delsys will be filled dynamically */ |
| .info = { |
| .name = "DRXK", |
| .frequency_min = 47000000, |
| .frequency_max = 865000000, |
| /* For DVB-C */ |
| .symbol_rate_min = 870000, |
| .symbol_rate_max = 11700000, |
| /* For DVB-T */ |
| .frequency_stepsize = 166667, |
| |
| .caps = FE_CAN_QAM_16 | FE_CAN_QAM_32 | FE_CAN_QAM_64 | |
| FE_CAN_QAM_128 | FE_CAN_QAM_256 | FE_CAN_FEC_AUTO | |
| FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | |
| FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_MUTE_TS | |
| FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_RECOVER | |
| FE_CAN_GUARD_INTERVAL_AUTO | FE_CAN_HIERARCHY_AUTO |
| }, |
| |
| .release = drxk_release, |
| .sleep = drxk_sleep, |
| .i2c_gate_ctrl = drxk_gate_ctrl, |
| |
| .set_frontend = drxk_set_parameters, |
| .get_tune_settings = drxk_get_tune_settings, |
| |
| .read_status = drxk_read_status, |
| .read_ber = drxk_read_ber, |
| .read_signal_strength = drxk_read_signal_strength, |
| .read_snr = drxk_read_snr, |
| .read_ucblocks = drxk_read_ucblocks, |
| }; |
| |
| struct dvb_frontend *drxk_attach(const struct drxk_config *config, |
| struct i2c_adapter *i2c) |
| { |
| int n; |
| |
| struct drxk_state *state = NULL; |
| u8 adr = config->adr; |
| |
| dprintk(1, "\n"); |
| state = kzalloc(sizeof(struct drxk_state), GFP_KERNEL); |
| if (!state) |
| return NULL; |
| |
| state->i2c = i2c; |
| state->demod_address = adr; |
| state->single_master = config->single_master; |
| state->microcode_name = config->microcode_name; |
| state->no_i2c_bridge = config->no_i2c_bridge; |
| state->antenna_gpio = config->antenna_gpio; |
| state->antenna_dvbt = config->antenna_dvbt; |
| state->m_ChunkSize = config->chunk_size; |
| state->enable_merr_cfg = config->enable_merr_cfg; |
| |
| if (config->dynamic_clk) { |
| state->m_DVBTStaticCLK = 0; |
| state->m_DVBCStaticCLK = 0; |
| } else { |
| state->m_DVBTStaticCLK = 1; |
| state->m_DVBCStaticCLK = 1; |
| } |
| |
| |
| if (config->mpeg_out_clk_strength) |
| state->m_TSClockkStrength = config->mpeg_out_clk_strength & 0x07; |
| else |
| state->m_TSClockkStrength = 0x06; |
| |
| if (config->parallel_ts) |
| state->m_enableParallel = true; |
| else |
| state->m_enableParallel = false; |
| |
| /* NOTE: as more UIO bits will be used, add them to the mask */ |
| state->UIO_mask = config->antenna_gpio; |
| |
| /* Default gpio to DVB-C */ |
| if (!state->antenna_dvbt && state->antenna_gpio) |
| state->m_GPIO |= state->antenna_gpio; |
| else |
| state->m_GPIO &= ~state->antenna_gpio; |
| |
| mutex_init(&state->mutex); |
| |
| memcpy(&state->frontend.ops, &drxk_ops, sizeof(drxk_ops)); |
| state->frontend.demodulator_priv = state; |
| |
| init_state(state); |
| if (init_drxk(state) < 0) |
| goto error; |
| |
| /* Initialize the supported delivery systems */ |
| n = 0; |
| if (state->m_hasDVBC) { |
| state->frontend.ops.delsys[n++] = SYS_DVBC_ANNEX_A; |
| state->frontend.ops.delsys[n++] = SYS_DVBC_ANNEX_C; |
| strlcat(state->frontend.ops.info.name, " DVB-C", |
| sizeof(state->frontend.ops.info.name)); |
| } |
| if (state->m_hasDVBT) { |
| state->frontend.ops.delsys[n++] = SYS_DVBT; |
| strlcat(state->frontend.ops.info.name, " DVB-T", |
| sizeof(state->frontend.ops.info.name)); |
| } |
| |
| printk(KERN_INFO "drxk: frontend initialized.\n"); |
| return &state->frontend; |
| |
| error: |
| printk(KERN_ERR "drxk: not found\n"); |
| kfree(state); |
| return NULL; |
| } |
| EXPORT_SYMBOL(drxk_attach); |
| |
| MODULE_DESCRIPTION("DRX-K driver"); |
| MODULE_AUTHOR("Ralph Metzler"); |
| MODULE_LICENSE("GPL"); |