| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Kunit test for clk rate management |
| */ |
| #include <linux/clk.h> |
| #include <linux/clk-provider.h> |
| |
| /* Needed for clk_hw_get_clk() */ |
| #include "clk.h" |
| |
| #include <kunit/test.h> |
| |
| #define DUMMY_CLOCK_INIT_RATE (42 * 1000 * 1000) |
| #define DUMMY_CLOCK_RATE_1 (142 * 1000 * 1000) |
| #define DUMMY_CLOCK_RATE_2 (242 * 1000 * 1000) |
| |
| struct clk_dummy_context { |
| struct clk_hw hw; |
| unsigned long rate; |
| }; |
| |
| static unsigned long clk_dummy_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| struct clk_dummy_context *ctx = |
| container_of(hw, struct clk_dummy_context, hw); |
| |
| return ctx->rate; |
| } |
| |
| static int clk_dummy_determine_rate(struct clk_hw *hw, |
| struct clk_rate_request *req) |
| { |
| /* Just return the same rate without modifying it */ |
| return 0; |
| } |
| |
| static int clk_dummy_maximize_rate(struct clk_hw *hw, |
| struct clk_rate_request *req) |
| { |
| /* |
| * If there's a maximum set, always run the clock at the maximum |
| * allowed. |
| */ |
| if (req->max_rate < ULONG_MAX) |
| req->rate = req->max_rate; |
| |
| return 0; |
| } |
| |
| static int clk_dummy_minimize_rate(struct clk_hw *hw, |
| struct clk_rate_request *req) |
| { |
| /* |
| * If there's a minimum set, always run the clock at the minimum |
| * allowed. |
| */ |
| if (req->min_rate > 0) |
| req->rate = req->min_rate; |
| |
| return 0; |
| } |
| |
| static int clk_dummy_set_rate(struct clk_hw *hw, |
| unsigned long rate, |
| unsigned long parent_rate) |
| { |
| struct clk_dummy_context *ctx = |
| container_of(hw, struct clk_dummy_context, hw); |
| |
| ctx->rate = rate; |
| return 0; |
| } |
| |
| static int clk_dummy_single_set_parent(struct clk_hw *hw, u8 index) |
| { |
| if (index >= clk_hw_get_num_parents(hw)) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static u8 clk_dummy_single_get_parent(struct clk_hw *hw) |
| { |
| return 0; |
| } |
| |
| static const struct clk_ops clk_dummy_rate_ops = { |
| .recalc_rate = clk_dummy_recalc_rate, |
| .determine_rate = clk_dummy_determine_rate, |
| .set_rate = clk_dummy_set_rate, |
| }; |
| |
| static const struct clk_ops clk_dummy_maximize_rate_ops = { |
| .recalc_rate = clk_dummy_recalc_rate, |
| .determine_rate = clk_dummy_maximize_rate, |
| .set_rate = clk_dummy_set_rate, |
| }; |
| |
| static const struct clk_ops clk_dummy_minimize_rate_ops = { |
| .recalc_rate = clk_dummy_recalc_rate, |
| .determine_rate = clk_dummy_minimize_rate, |
| .set_rate = clk_dummy_set_rate, |
| }; |
| |
| static const struct clk_ops clk_dummy_single_parent_ops = { |
| /* |
| * FIXME: Even though we should probably be able to use |
| * __clk_mux_determine_rate() here, if we use it and call |
| * clk_round_rate() or clk_set_rate() with a rate lower than |
| * what all the parents can provide, it will return -EINVAL. |
| * |
| * This is due to the fact that it has the undocumented |
| * behaviour to always pick up the closest rate higher than the |
| * requested rate. If we get something lower, it thus considers |
| * that it's not acceptable and will return an error. |
| * |
| * It's somewhat inconsistent and creates a weird threshold |
| * between rates above the parent rate which would be rounded to |
| * what the parent can provide, but rates below will simply |
| * return an error. |
| */ |
| .determine_rate = __clk_mux_determine_rate_closest, |
| .set_parent = clk_dummy_single_set_parent, |
| .get_parent = clk_dummy_single_get_parent, |
| }; |
| |
| struct clk_multiple_parent_ctx { |
| struct clk_dummy_context parents_ctx[2]; |
| struct clk_hw hw; |
| u8 current_parent; |
| }; |
| |
| static int clk_multiple_parents_mux_set_parent(struct clk_hw *hw, u8 index) |
| { |
| struct clk_multiple_parent_ctx *ctx = |
| container_of(hw, struct clk_multiple_parent_ctx, hw); |
| |
| if (index >= clk_hw_get_num_parents(hw)) |
| return -EINVAL; |
| |
| ctx->current_parent = index; |
| |
| return 0; |
| } |
| |
| static u8 clk_multiple_parents_mux_get_parent(struct clk_hw *hw) |
| { |
| struct clk_multiple_parent_ctx *ctx = |
| container_of(hw, struct clk_multiple_parent_ctx, hw); |
| |
| return ctx->current_parent; |
| } |
| |
| static const struct clk_ops clk_multiple_parents_mux_ops = { |
| .get_parent = clk_multiple_parents_mux_get_parent, |
| .set_parent = clk_multiple_parents_mux_set_parent, |
| .determine_rate = __clk_mux_determine_rate_closest, |
| }; |
| |
| static const struct clk_ops clk_multiple_parents_no_reparent_mux_ops = { |
| .determine_rate = clk_hw_determine_rate_no_reparent, |
| .get_parent = clk_multiple_parents_mux_get_parent, |
| .set_parent = clk_multiple_parents_mux_set_parent, |
| }; |
| |
| static int clk_test_init_with_ops(struct kunit *test, const struct clk_ops *ops) |
| { |
| struct clk_dummy_context *ctx; |
| struct clk_init_data init = { }; |
| int ret; |
| |
| ctx = kunit_kzalloc(test, sizeof(*ctx), GFP_KERNEL); |
| if (!ctx) |
| return -ENOMEM; |
| ctx->rate = DUMMY_CLOCK_INIT_RATE; |
| test->priv = ctx; |
| |
| init.name = "test_dummy_rate"; |
| init.ops = ops; |
| ctx->hw.init = &init; |
| |
| ret = clk_hw_register(NULL, &ctx->hw); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| static int clk_test_init(struct kunit *test) |
| { |
| return clk_test_init_with_ops(test, &clk_dummy_rate_ops); |
| } |
| |
| static int clk_maximize_test_init(struct kunit *test) |
| { |
| return clk_test_init_with_ops(test, &clk_dummy_maximize_rate_ops); |
| } |
| |
| static int clk_minimize_test_init(struct kunit *test) |
| { |
| return clk_test_init_with_ops(test, &clk_dummy_minimize_rate_ops); |
| } |
| |
| static void clk_test_exit(struct kunit *test) |
| { |
| struct clk_dummy_context *ctx = test->priv; |
| |
| clk_hw_unregister(&ctx->hw); |
| } |
| |
| /* |
| * Test that the actual rate matches what is returned by clk_get_rate() |
| */ |
| static void clk_test_get_rate(struct kunit *test) |
| { |
| struct clk_dummy_context *ctx = test->priv; |
| struct clk_hw *hw = &ctx->hw; |
| struct clk *clk = clk_hw_get_clk(hw, NULL); |
| unsigned long rate; |
| |
| rate = clk_get_rate(clk); |
| KUNIT_ASSERT_GT(test, rate, 0); |
| KUNIT_EXPECT_EQ(test, rate, ctx->rate); |
| |
| clk_put(clk); |
| } |
| |
| /* |
| * Test that, after a call to clk_set_rate(), the rate returned by |
| * clk_get_rate() matches. |
| * |
| * This assumes that clk_ops.determine_rate or clk_ops.round_rate won't |
| * modify the requested rate, which is our case in clk_dummy_rate_ops. |
| */ |
| static void clk_test_set_get_rate(struct kunit *test) |
| { |
| struct clk_dummy_context *ctx = test->priv; |
| struct clk_hw *hw = &ctx->hw; |
| struct clk *clk = clk_hw_get_clk(hw, NULL); |
| unsigned long rate; |
| |
| KUNIT_ASSERT_EQ(test, |
| clk_set_rate(clk, DUMMY_CLOCK_RATE_1), |
| 0); |
| |
| rate = clk_get_rate(clk); |
| KUNIT_ASSERT_GT(test, rate, 0); |
| KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_1); |
| |
| clk_put(clk); |
| } |
| |
| /* |
| * Test that, after several calls to clk_set_rate(), the rate returned |
| * by clk_get_rate() matches the last one. |
| * |
| * This assumes that clk_ops.determine_rate or clk_ops.round_rate won't |
| * modify the requested rate, which is our case in clk_dummy_rate_ops. |
| */ |
| static void clk_test_set_set_get_rate(struct kunit *test) |
| { |
| struct clk_dummy_context *ctx = test->priv; |
| struct clk_hw *hw = &ctx->hw; |
| struct clk *clk = clk_hw_get_clk(hw, NULL); |
| unsigned long rate; |
| |
| KUNIT_ASSERT_EQ(test, |
| clk_set_rate(clk, DUMMY_CLOCK_RATE_1), |
| 0); |
| |
| KUNIT_ASSERT_EQ(test, |
| clk_set_rate(clk, DUMMY_CLOCK_RATE_2), |
| 0); |
| |
| rate = clk_get_rate(clk); |
| KUNIT_ASSERT_GT(test, rate, 0); |
| KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_2); |
| |
| clk_put(clk); |
| } |
| |
| /* |
| * Test that clk_round_rate and clk_set_rate are consitent and will |
| * return the same frequency. |
| */ |
| static void clk_test_round_set_get_rate(struct kunit *test) |
| { |
| struct clk_dummy_context *ctx = test->priv; |
| struct clk_hw *hw = &ctx->hw; |
| struct clk *clk = clk_hw_get_clk(hw, NULL); |
| unsigned long set_rate; |
| long rounded_rate; |
| |
| rounded_rate = clk_round_rate(clk, DUMMY_CLOCK_RATE_1); |
| KUNIT_ASSERT_GT(test, rounded_rate, 0); |
| KUNIT_EXPECT_EQ(test, rounded_rate, DUMMY_CLOCK_RATE_1); |
| |
| KUNIT_ASSERT_EQ(test, |
| clk_set_rate(clk, DUMMY_CLOCK_RATE_1), |
| 0); |
| |
| set_rate = clk_get_rate(clk); |
| KUNIT_ASSERT_GT(test, set_rate, 0); |
| KUNIT_EXPECT_EQ(test, rounded_rate, set_rate); |
| |
| clk_put(clk); |
| } |
| |
| static struct kunit_case clk_test_cases[] = { |
| KUNIT_CASE(clk_test_get_rate), |
| KUNIT_CASE(clk_test_set_get_rate), |
| KUNIT_CASE(clk_test_set_set_get_rate), |
| KUNIT_CASE(clk_test_round_set_get_rate), |
| {} |
| }; |
| |
| /* |
| * Test suite for a basic rate clock, without any parent. |
| * |
| * These tests exercise the rate API with simple scenarios |
| */ |
| static struct kunit_suite clk_test_suite = { |
| .name = "clk-test", |
| .init = clk_test_init, |
| .exit = clk_test_exit, |
| .test_cases = clk_test_cases, |
| }; |
| |
| static int clk_uncached_test_init(struct kunit *test) |
| { |
| struct clk_dummy_context *ctx; |
| int ret; |
| |
| ctx = kunit_kzalloc(test, sizeof(*ctx), GFP_KERNEL); |
| if (!ctx) |
| return -ENOMEM; |
| test->priv = ctx; |
| |
| ctx->rate = DUMMY_CLOCK_INIT_RATE; |
| ctx->hw.init = CLK_HW_INIT_NO_PARENT("test-clk", |
| &clk_dummy_rate_ops, |
| CLK_GET_RATE_NOCACHE); |
| |
| ret = clk_hw_register(NULL, &ctx->hw); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| /* |
| * Test that for an uncached clock, the clock framework doesn't cache |
| * the rate and clk_get_rate() will return the underlying clock rate |
| * even if it changed. |
| */ |
| static void clk_test_uncached_get_rate(struct kunit *test) |
| { |
| struct clk_dummy_context *ctx = test->priv; |
| struct clk_hw *hw = &ctx->hw; |
| struct clk *clk = clk_hw_get_clk(hw, NULL); |
| unsigned long rate; |
| |
| rate = clk_get_rate(clk); |
| KUNIT_ASSERT_GT(test, rate, 0); |
| KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_INIT_RATE); |
| |
| /* We change the rate behind the clock framework's back */ |
| ctx->rate = DUMMY_CLOCK_RATE_1; |
| rate = clk_get_rate(clk); |
| KUNIT_ASSERT_GT(test, rate, 0); |
| KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_1); |
| |
| clk_put(clk); |
| } |
| |
| /* |
| * Test that for an uncached clock, clk_set_rate_range() will work |
| * properly if the rate hasn't changed. |
| */ |
| static void clk_test_uncached_set_range(struct kunit *test) |
| { |
| struct clk_dummy_context *ctx = test->priv; |
| struct clk_hw *hw = &ctx->hw; |
| struct clk *clk = clk_hw_get_clk(hw, NULL); |
| unsigned long rate; |
| |
| KUNIT_ASSERT_EQ(test, |
| clk_set_rate_range(clk, |
| DUMMY_CLOCK_RATE_1, |
| DUMMY_CLOCK_RATE_2), |
| 0); |
| |
| rate = clk_get_rate(clk); |
| KUNIT_ASSERT_GT(test, rate, 0); |
| KUNIT_EXPECT_GE(test, rate, DUMMY_CLOCK_RATE_1); |
| KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_2); |
| |
| clk_put(clk); |
| } |
| |
| /* |
| * Test that for an uncached clock, clk_set_rate_range() will work |
| * properly if the rate has changed in hardware. |
| * |
| * In this case, it means that if the rate wasn't initially in the range |
| * we're trying to set, but got changed at some point into the range |
| * without the kernel knowing about it, its rate shouldn't be affected. |
| */ |
| static void clk_test_uncached_updated_rate_set_range(struct kunit *test) |
| { |
| struct clk_dummy_context *ctx = test->priv; |
| struct clk_hw *hw = &ctx->hw; |
| struct clk *clk = clk_hw_get_clk(hw, NULL); |
| unsigned long rate; |
| |
| /* We change the rate behind the clock framework's back */ |
| ctx->rate = DUMMY_CLOCK_RATE_1 + 1000; |
| KUNIT_ASSERT_EQ(test, |
| clk_set_rate_range(clk, |
| DUMMY_CLOCK_RATE_1, |
| DUMMY_CLOCK_RATE_2), |
| 0); |
| |
| rate = clk_get_rate(clk); |
| KUNIT_ASSERT_GT(test, rate, 0); |
| KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_1 + 1000); |
| |
| clk_put(clk); |
| } |
| |
| static struct kunit_case clk_uncached_test_cases[] = { |
| KUNIT_CASE(clk_test_uncached_get_rate), |
| KUNIT_CASE(clk_test_uncached_set_range), |
| KUNIT_CASE(clk_test_uncached_updated_rate_set_range), |
| {} |
| }; |
| |
| /* |
| * Test suite for a basic, uncached, rate clock, without any parent. |
| * |
| * These tests exercise the rate API with simple scenarios |
| */ |
| static struct kunit_suite clk_uncached_test_suite = { |
| .name = "clk-uncached-test", |
| .init = clk_uncached_test_init, |
| .exit = clk_test_exit, |
| .test_cases = clk_uncached_test_cases, |
| }; |
| |
| static int |
| clk_multiple_parents_mux_test_init(struct kunit *test) |
| { |
| struct clk_multiple_parent_ctx *ctx; |
| const char *parents[2] = { "parent-0", "parent-1"}; |
| int ret; |
| |
| ctx = kunit_kzalloc(test, sizeof(*ctx), GFP_KERNEL); |
| if (!ctx) |
| return -ENOMEM; |
| test->priv = ctx; |
| |
| ctx->parents_ctx[0].hw.init = CLK_HW_INIT_NO_PARENT("parent-0", |
| &clk_dummy_rate_ops, |
| 0); |
| ctx->parents_ctx[0].rate = DUMMY_CLOCK_RATE_1; |
| ret = clk_hw_register(NULL, &ctx->parents_ctx[0].hw); |
| if (ret) |
| return ret; |
| |
| ctx->parents_ctx[1].hw.init = CLK_HW_INIT_NO_PARENT("parent-1", |
| &clk_dummy_rate_ops, |
| 0); |
| ctx->parents_ctx[1].rate = DUMMY_CLOCK_RATE_2; |
| ret = clk_hw_register(NULL, &ctx->parents_ctx[1].hw); |
| if (ret) |
| return ret; |
| |
| ctx->current_parent = 0; |
| ctx->hw.init = CLK_HW_INIT_PARENTS("test-mux", parents, |
| &clk_multiple_parents_mux_ops, |
| CLK_SET_RATE_PARENT); |
| ret = clk_hw_register(NULL, &ctx->hw); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| static void |
| clk_multiple_parents_mux_test_exit(struct kunit *test) |
| { |
| struct clk_multiple_parent_ctx *ctx = test->priv; |
| |
| clk_hw_unregister(&ctx->hw); |
| clk_hw_unregister(&ctx->parents_ctx[0].hw); |
| clk_hw_unregister(&ctx->parents_ctx[1].hw); |
| } |
| |
| /* |
| * Test that for a clock with multiple parents, clk_get_parent() |
| * actually returns the current one. |
| */ |
| static void |
| clk_test_multiple_parents_mux_get_parent(struct kunit *test) |
| { |
| struct clk_multiple_parent_ctx *ctx = test->priv; |
| struct clk_hw *hw = &ctx->hw; |
| struct clk *clk = clk_hw_get_clk(hw, NULL); |
| struct clk *parent = clk_hw_get_clk(&ctx->parents_ctx[0].hw, NULL); |
| |
| KUNIT_EXPECT_TRUE(test, clk_is_match(clk_get_parent(clk), parent)); |
| |
| clk_put(parent); |
| clk_put(clk); |
| } |
| |
| /* |
| * Test that for a clock with a multiple parents, clk_has_parent() |
| * actually reports all of them as parents. |
| */ |
| static void |
| clk_test_multiple_parents_mux_has_parent(struct kunit *test) |
| { |
| struct clk_multiple_parent_ctx *ctx = test->priv; |
| struct clk_hw *hw = &ctx->hw; |
| struct clk *clk = clk_hw_get_clk(hw, NULL); |
| struct clk *parent; |
| |
| parent = clk_hw_get_clk(&ctx->parents_ctx[0].hw, NULL); |
| KUNIT_EXPECT_TRUE(test, clk_has_parent(clk, parent)); |
| clk_put(parent); |
| |
| parent = clk_hw_get_clk(&ctx->parents_ctx[1].hw, NULL); |
| KUNIT_EXPECT_TRUE(test, clk_has_parent(clk, parent)); |
| clk_put(parent); |
| |
| clk_put(clk); |
| } |
| |
| /* |
| * Test that for a clock with a multiple parents, if we set a range on |
| * that clock and the parent is changed, its rate after the reparenting |
| * is still within the range we asked for. |
| * |
| * FIXME: clk_set_parent() only does the reparenting but doesn't |
| * reevaluate whether the new clock rate is within its boundaries or |
| * not. |
| */ |
| static void |
| clk_test_multiple_parents_mux_set_range_set_parent_get_rate(struct kunit *test) |
| { |
| struct clk_multiple_parent_ctx *ctx = test->priv; |
| struct clk_hw *hw = &ctx->hw; |
| struct clk *clk = clk_hw_get_clk(hw, NULL); |
| struct clk *parent1, *parent2; |
| unsigned long rate; |
| int ret; |
| |
| kunit_skip(test, "This needs to be fixed in the core."); |
| |
| parent1 = clk_hw_get_clk(&ctx->parents_ctx[0].hw, NULL); |
| KUNIT_ASSERT_NOT_ERR_OR_NULL(test, parent1); |
| KUNIT_ASSERT_TRUE(test, clk_is_match(clk_get_parent(clk), parent1)); |
| |
| parent2 = clk_hw_get_clk(&ctx->parents_ctx[1].hw, NULL); |
| KUNIT_ASSERT_NOT_ERR_OR_NULL(test, parent2); |
| |
| ret = clk_set_rate(parent1, DUMMY_CLOCK_RATE_1); |
| KUNIT_ASSERT_EQ(test, ret, 0); |
| |
| ret = clk_set_rate(parent2, DUMMY_CLOCK_RATE_2); |
| KUNIT_ASSERT_EQ(test, ret, 0); |
| |
| ret = clk_set_rate_range(clk, |
| DUMMY_CLOCK_RATE_1 - 1000, |
| DUMMY_CLOCK_RATE_1 + 1000); |
| KUNIT_ASSERT_EQ(test, ret, 0); |
| |
| ret = clk_set_parent(clk, parent2); |
| KUNIT_ASSERT_EQ(test, ret, 0); |
| |
| rate = clk_get_rate(clk); |
| KUNIT_ASSERT_GT(test, rate, 0); |
| KUNIT_EXPECT_GE(test, rate, DUMMY_CLOCK_RATE_1 - 1000); |
| KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_1 + 1000); |
| |
| clk_put(parent2); |
| clk_put(parent1); |
| clk_put(clk); |
| } |
| |
| static struct kunit_case clk_multiple_parents_mux_test_cases[] = { |
| KUNIT_CASE(clk_test_multiple_parents_mux_get_parent), |
| KUNIT_CASE(clk_test_multiple_parents_mux_has_parent), |
| KUNIT_CASE(clk_test_multiple_parents_mux_set_range_set_parent_get_rate), |
| {} |
| }; |
| |
| /* |
| * Test suite for a basic mux clock with two parents, with |
| * CLK_SET_RATE_PARENT on the child. |
| * |
| * These tests exercise the consumer API and check that the state of the |
| * child and parents are sane and consistent. |
| */ |
| static struct kunit_suite |
| clk_multiple_parents_mux_test_suite = { |
| .name = "clk-multiple-parents-mux-test", |
| .init = clk_multiple_parents_mux_test_init, |
| .exit = clk_multiple_parents_mux_test_exit, |
| .test_cases = clk_multiple_parents_mux_test_cases, |
| }; |
| |
| static int |
| clk_orphan_transparent_multiple_parent_mux_test_init(struct kunit *test) |
| { |
| struct clk_multiple_parent_ctx *ctx; |
| const char *parents[2] = { "missing-parent", "proper-parent"}; |
| int ret; |
| |
| ctx = kunit_kzalloc(test, sizeof(*ctx), GFP_KERNEL); |
| if (!ctx) |
| return -ENOMEM; |
| test->priv = ctx; |
| |
| ctx->parents_ctx[1].hw.init = CLK_HW_INIT_NO_PARENT("proper-parent", |
| &clk_dummy_rate_ops, |
| 0); |
| ctx->parents_ctx[1].rate = DUMMY_CLOCK_INIT_RATE; |
| ret = clk_hw_register(NULL, &ctx->parents_ctx[1].hw); |
| if (ret) |
| return ret; |
| |
| ctx->hw.init = CLK_HW_INIT_PARENTS("test-orphan-mux", parents, |
| &clk_multiple_parents_mux_ops, |
| CLK_SET_RATE_PARENT); |
| ret = clk_hw_register(NULL, &ctx->hw); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| static void |
| clk_orphan_transparent_multiple_parent_mux_test_exit(struct kunit *test) |
| { |
| struct clk_multiple_parent_ctx *ctx = test->priv; |
| |
| clk_hw_unregister(&ctx->hw); |
| clk_hw_unregister(&ctx->parents_ctx[1].hw); |
| } |
| |
| /* |
| * Test that, for a mux whose current parent hasn't been registered yet and is |
| * thus orphan, clk_get_parent() will return NULL. |
| */ |
| static void |
| clk_test_orphan_transparent_multiple_parent_mux_get_parent(struct kunit *test) |
| { |
| struct clk_multiple_parent_ctx *ctx = test->priv; |
| struct clk_hw *hw = &ctx->hw; |
| struct clk *clk = clk_hw_get_clk(hw, NULL); |
| |
| KUNIT_EXPECT_PTR_EQ(test, clk_get_parent(clk), NULL); |
| |
| clk_put(clk); |
| } |
| |
| /* |
| * Test that, for a mux whose current parent hasn't been registered yet, |
| * calling clk_set_parent() to a valid parent will properly update the |
| * mux parent and its orphan status. |
| */ |
| static void |
| clk_test_orphan_transparent_multiple_parent_mux_set_parent(struct kunit *test) |
| { |
| struct clk_multiple_parent_ctx *ctx = test->priv; |
| struct clk_hw *hw = &ctx->hw; |
| struct clk *clk = clk_hw_get_clk(hw, NULL); |
| struct clk *parent, *new_parent; |
| int ret; |
| |
| parent = clk_hw_get_clk(&ctx->parents_ctx[1].hw, NULL); |
| KUNIT_ASSERT_NOT_ERR_OR_NULL(test, parent); |
| |
| ret = clk_set_parent(clk, parent); |
| KUNIT_ASSERT_EQ(test, ret, 0); |
| |
| new_parent = clk_get_parent(clk); |
| KUNIT_ASSERT_NOT_ERR_OR_NULL(test, parent); |
| KUNIT_EXPECT_TRUE(test, clk_is_match(parent, new_parent)); |
| |
| clk_put(parent); |
| clk_put(clk); |
| } |
| |
| /* |
| * Test that, for a mux that started orphan but got switched to a valid |
| * parent, calling clk_drop_range() on the mux won't affect the parent |
| * rate. |
| */ |
| static void |
| clk_test_orphan_transparent_multiple_parent_mux_set_parent_drop_range(struct kunit *test) |
| { |
| struct clk_multiple_parent_ctx *ctx = test->priv; |
| struct clk_hw *hw = &ctx->hw; |
| struct clk *clk = clk_hw_get_clk(hw, NULL); |
| struct clk *parent; |
| unsigned long parent_rate, new_parent_rate; |
| int ret; |
| |
| parent = clk_hw_get_clk(&ctx->parents_ctx[1].hw, NULL); |
| KUNIT_ASSERT_NOT_ERR_OR_NULL(test, parent); |
| |
| parent_rate = clk_get_rate(parent); |
| KUNIT_ASSERT_GT(test, parent_rate, 0); |
| |
| ret = clk_set_parent(clk, parent); |
| KUNIT_ASSERT_EQ(test, ret, 0); |
| |
| ret = clk_drop_range(clk); |
| KUNIT_ASSERT_EQ(test, ret, 0); |
| |
| new_parent_rate = clk_get_rate(clk); |
| KUNIT_ASSERT_GT(test, new_parent_rate, 0); |
| KUNIT_EXPECT_EQ(test, parent_rate, new_parent_rate); |
| |
| clk_put(parent); |
| clk_put(clk); |
| } |
| |
| /* |
| * Test that, for a mux that started orphan but got switched to a valid |
| * parent, the rate of the mux and its new parent are consistent. |
| */ |
| static void |
| clk_test_orphan_transparent_multiple_parent_mux_set_parent_get_rate(struct kunit *test) |
| { |
| struct clk_multiple_parent_ctx *ctx = test->priv; |
| struct clk_hw *hw = &ctx->hw; |
| struct clk *clk = clk_hw_get_clk(hw, NULL); |
| struct clk *parent; |
| unsigned long parent_rate, rate; |
| int ret; |
| |
| parent = clk_hw_get_clk(&ctx->parents_ctx[1].hw, NULL); |
| KUNIT_ASSERT_NOT_ERR_OR_NULL(test, parent); |
| |
| parent_rate = clk_get_rate(parent); |
| KUNIT_ASSERT_GT(test, parent_rate, 0); |
| |
| ret = clk_set_parent(clk, parent); |
| KUNIT_ASSERT_EQ(test, ret, 0); |
| |
| rate = clk_get_rate(clk); |
| KUNIT_ASSERT_GT(test, rate, 0); |
| KUNIT_EXPECT_EQ(test, parent_rate, rate); |
| |
| clk_put(parent); |
| clk_put(clk); |
| } |
| |
| /* |
| * Test that, for a mux that started orphan but got switched to a valid |
| * parent, calling clk_put() on the mux won't affect the parent rate. |
| */ |
| static void |
| clk_test_orphan_transparent_multiple_parent_mux_set_parent_put(struct kunit *test) |
| { |
| struct clk_multiple_parent_ctx *ctx = test->priv; |
| struct clk *clk, *parent; |
| unsigned long parent_rate, new_parent_rate; |
| int ret; |
| |
| parent = clk_hw_get_clk(&ctx->parents_ctx[1].hw, NULL); |
| KUNIT_ASSERT_NOT_ERR_OR_NULL(test, parent); |
| |
| clk = clk_hw_get_clk(&ctx->hw, NULL); |
| KUNIT_ASSERT_NOT_ERR_OR_NULL(test, clk); |
| |
| parent_rate = clk_get_rate(parent); |
| KUNIT_ASSERT_GT(test, parent_rate, 0); |
| |
| ret = clk_set_parent(clk, parent); |
| KUNIT_ASSERT_EQ(test, ret, 0); |
| |
| clk_put(clk); |
| |
| new_parent_rate = clk_get_rate(parent); |
| KUNIT_ASSERT_GT(test, new_parent_rate, 0); |
| KUNIT_EXPECT_EQ(test, parent_rate, new_parent_rate); |
| |
| clk_put(parent); |
| } |
| |
| /* |
| * Test that, for a mux that started orphan but got switched to a valid |
| * parent, calling clk_set_rate_range() will affect the parent state if |
| * its rate is out of range. |
| */ |
| static void |
| clk_test_orphan_transparent_multiple_parent_mux_set_parent_set_range_modified(struct kunit *test) |
| { |
| struct clk_multiple_parent_ctx *ctx = test->priv; |
| struct clk_hw *hw = &ctx->hw; |
| struct clk *clk = clk_hw_get_clk(hw, NULL); |
| struct clk *parent; |
| unsigned long rate; |
| int ret; |
| |
| parent = clk_hw_get_clk(&ctx->parents_ctx[1].hw, NULL); |
| KUNIT_ASSERT_NOT_ERR_OR_NULL(test, parent); |
| |
| ret = clk_set_parent(clk, parent); |
| KUNIT_ASSERT_EQ(test, ret, 0); |
| |
| ret = clk_set_rate_range(clk, DUMMY_CLOCK_RATE_1, DUMMY_CLOCK_RATE_2); |
| KUNIT_ASSERT_EQ(test, ret, 0); |
| |
| rate = clk_get_rate(clk); |
| KUNIT_ASSERT_GT(test, rate, 0); |
| KUNIT_EXPECT_GE(test, rate, DUMMY_CLOCK_RATE_1); |
| KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_2); |
| |
| clk_put(parent); |
| clk_put(clk); |
| } |
| |
| /* |
| * Test that, for a mux that started orphan but got switched to a valid |
| * parent, calling clk_set_rate_range() won't affect the parent state if |
| * its rate is within range. |
| */ |
| static void |
| clk_test_orphan_transparent_multiple_parent_mux_set_parent_set_range_untouched(struct kunit *test) |
| { |
| struct clk_multiple_parent_ctx *ctx = test->priv; |
| struct clk_hw *hw = &ctx->hw; |
| struct clk *clk = clk_hw_get_clk(hw, NULL); |
| struct clk *parent; |
| unsigned long parent_rate, new_parent_rate; |
| int ret; |
| |
| parent = clk_hw_get_clk(&ctx->parents_ctx[1].hw, NULL); |
| KUNIT_ASSERT_NOT_ERR_OR_NULL(test, parent); |
| |
| parent_rate = clk_get_rate(parent); |
| KUNIT_ASSERT_GT(test, parent_rate, 0); |
| |
| ret = clk_set_parent(clk, parent); |
| KUNIT_ASSERT_EQ(test, ret, 0); |
| |
| ret = clk_set_rate_range(clk, |
| DUMMY_CLOCK_INIT_RATE - 1000, |
| DUMMY_CLOCK_INIT_RATE + 1000); |
| KUNIT_ASSERT_EQ(test, ret, 0); |
| |
| new_parent_rate = clk_get_rate(parent); |
| KUNIT_ASSERT_GT(test, new_parent_rate, 0); |
| KUNIT_EXPECT_EQ(test, parent_rate, new_parent_rate); |
| |
| clk_put(parent); |
| clk_put(clk); |
| } |
| |
| /* |
| * Test that, for a mux whose current parent hasn't been registered yet, |
| * calling clk_set_rate_range() will succeed, and will be taken into |
| * account when rounding a rate. |
| */ |
| static void |
| clk_test_orphan_transparent_multiple_parent_mux_set_range_round_rate(struct kunit *test) |
| { |
| struct clk_multiple_parent_ctx *ctx = test->priv; |
| struct clk_hw *hw = &ctx->hw; |
| struct clk *clk = clk_hw_get_clk(hw, NULL); |
| long rate; |
| int ret; |
| |
| ret = clk_set_rate_range(clk, DUMMY_CLOCK_RATE_1, DUMMY_CLOCK_RATE_2); |
| KUNIT_ASSERT_EQ(test, ret, 0); |
| |
| rate = clk_round_rate(clk, DUMMY_CLOCK_RATE_1 - 1000); |
| KUNIT_ASSERT_GT(test, rate, 0); |
| KUNIT_EXPECT_GE(test, rate, DUMMY_CLOCK_RATE_1); |
| KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_2); |
| |
| clk_put(clk); |
| } |
| |
| /* |
| * Test that, for a mux that started orphan, was assigned and rate and |
| * then got switched to a valid parent, its rate is eventually within |
| * range. |
| * |
| * FIXME: Even though we update the rate as part of clk_set_parent(), we |
| * don't evaluate whether that new rate is within range and needs to be |
| * adjusted. |
| */ |
| static void |
| clk_test_orphan_transparent_multiple_parent_mux_set_range_set_parent_get_rate(struct kunit *test) |
| { |
| struct clk_multiple_parent_ctx *ctx = test->priv; |
| struct clk_hw *hw = &ctx->hw; |
| struct clk *clk = clk_hw_get_clk(hw, NULL); |
| struct clk *parent; |
| unsigned long rate; |
| int ret; |
| |
| kunit_skip(test, "This needs to be fixed in the core."); |
| |
| clk_hw_set_rate_range(hw, DUMMY_CLOCK_RATE_1, DUMMY_CLOCK_RATE_2); |
| |
| parent = clk_hw_get_clk(&ctx->parents_ctx[1].hw, NULL); |
| KUNIT_ASSERT_NOT_ERR_OR_NULL(test, parent); |
| |
| ret = clk_set_parent(clk, parent); |
| KUNIT_ASSERT_EQ(test, ret, 0); |
| |
| rate = clk_get_rate(clk); |
| KUNIT_ASSERT_GT(test, rate, 0); |
| KUNIT_EXPECT_GE(test, rate, DUMMY_CLOCK_RATE_1); |
| KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_2); |
| |
| clk_put(parent); |
| clk_put(clk); |
| } |
| |
| static struct kunit_case clk_orphan_transparent_multiple_parent_mux_test_cases[] = { |
| KUNIT_CASE(clk_test_orphan_transparent_multiple_parent_mux_get_parent), |
| KUNIT_CASE(clk_test_orphan_transparent_multiple_parent_mux_set_parent), |
| KUNIT_CASE(clk_test_orphan_transparent_multiple_parent_mux_set_parent_drop_range), |
| KUNIT_CASE(clk_test_orphan_transparent_multiple_parent_mux_set_parent_get_rate), |
| KUNIT_CASE(clk_test_orphan_transparent_multiple_parent_mux_set_parent_put), |
| KUNIT_CASE(clk_test_orphan_transparent_multiple_parent_mux_set_parent_set_range_modified), |
| KUNIT_CASE(clk_test_orphan_transparent_multiple_parent_mux_set_parent_set_range_untouched), |
| KUNIT_CASE(clk_test_orphan_transparent_multiple_parent_mux_set_range_round_rate), |
| KUNIT_CASE(clk_test_orphan_transparent_multiple_parent_mux_set_range_set_parent_get_rate), |
| {} |
| }; |
| |
| /* |
| * Test suite for a basic mux clock with two parents. The default parent |
| * isn't registered, only the second parent is. By default, the clock |
| * will thus be orphan. |
| * |
| * These tests exercise the behaviour of the consumer API when dealing |
| * with an orphan clock, and how we deal with the transition to a valid |
| * parent. |
| */ |
| static struct kunit_suite clk_orphan_transparent_multiple_parent_mux_test_suite = { |
| .name = "clk-orphan-transparent-multiple-parent-mux-test", |
| .init = clk_orphan_transparent_multiple_parent_mux_test_init, |
| .exit = clk_orphan_transparent_multiple_parent_mux_test_exit, |
| .test_cases = clk_orphan_transparent_multiple_parent_mux_test_cases, |
| }; |
| |
| struct clk_single_parent_ctx { |
| struct clk_dummy_context parent_ctx; |
| struct clk_hw hw; |
| }; |
| |
| static int clk_single_parent_mux_test_init(struct kunit *test) |
| { |
| struct clk_single_parent_ctx *ctx; |
| int ret; |
| |
| ctx = kunit_kzalloc(test, sizeof(*ctx), GFP_KERNEL); |
| if (!ctx) |
| return -ENOMEM; |
| test->priv = ctx; |
| |
| ctx->parent_ctx.rate = DUMMY_CLOCK_INIT_RATE; |
| ctx->parent_ctx.hw.init = |
| CLK_HW_INIT_NO_PARENT("parent-clk", |
| &clk_dummy_rate_ops, |
| 0); |
| |
| ret = clk_hw_register(NULL, &ctx->parent_ctx.hw); |
| if (ret) |
| return ret; |
| |
| ctx->hw.init = CLK_HW_INIT("test-clk", "parent-clk", |
| &clk_dummy_single_parent_ops, |
| CLK_SET_RATE_PARENT); |
| |
| ret = clk_hw_register(NULL, &ctx->hw); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| static void |
| clk_single_parent_mux_test_exit(struct kunit *test) |
| { |
| struct clk_single_parent_ctx *ctx = test->priv; |
| |
| clk_hw_unregister(&ctx->hw); |
| clk_hw_unregister(&ctx->parent_ctx.hw); |
| } |
| |
| /* |
| * Test that for a clock with a single parent, clk_get_parent() actually |
| * returns the parent. |
| */ |
| static void |
| clk_test_single_parent_mux_get_parent(struct kunit *test) |
| { |
| struct clk_single_parent_ctx *ctx = test->priv; |
| struct clk_hw *hw = &ctx->hw; |
| struct clk *clk = clk_hw_get_clk(hw, NULL); |
| struct clk *parent = clk_hw_get_clk(&ctx->parent_ctx.hw, NULL); |
| |
| KUNIT_EXPECT_TRUE(test, clk_is_match(clk_get_parent(clk), parent)); |
| |
| clk_put(parent); |
| clk_put(clk); |
| } |
| |
| /* |
| * Test that for a clock with a single parent, clk_has_parent() actually |
| * reports it as a parent. |
| */ |
| static void |
| clk_test_single_parent_mux_has_parent(struct kunit *test) |
| { |
| struct clk_single_parent_ctx *ctx = test->priv; |
| struct clk_hw *hw = &ctx->hw; |
| struct clk *clk = clk_hw_get_clk(hw, NULL); |
| struct clk *parent = clk_hw_get_clk(&ctx->parent_ctx.hw, NULL); |
| |
| KUNIT_EXPECT_TRUE(test, clk_has_parent(clk, parent)); |
| |
| clk_put(parent); |
| clk_put(clk); |
| } |
| |
| /* |
| * Test that for a clock that can't modify its rate and with a single |
| * parent, if we set disjoints range on the parent and then the child, |
| * the second will return an error. |
| * |
| * FIXME: clk_set_rate_range() only considers the current clock when |
| * evaluating whether ranges are disjoints and not the upstream clocks |
| * ranges. |
| */ |
| static void |
| clk_test_single_parent_mux_set_range_disjoint_child_last(struct kunit *test) |
| { |
| struct clk_single_parent_ctx *ctx = test->priv; |
| struct clk_hw *hw = &ctx->hw; |
| struct clk *clk = clk_hw_get_clk(hw, NULL); |
| struct clk *parent; |
| int ret; |
| |
| kunit_skip(test, "This needs to be fixed in the core."); |
| |
| parent = clk_get_parent(clk); |
| KUNIT_ASSERT_PTR_NE(test, parent, NULL); |
| |
| ret = clk_set_rate_range(parent, 1000, 2000); |
| KUNIT_ASSERT_EQ(test, ret, 0); |
| |
| ret = clk_set_rate_range(clk, 3000, 4000); |
| KUNIT_EXPECT_LT(test, ret, 0); |
| |
| clk_put(clk); |
| } |
| |
| /* |
| * Test that for a clock that can't modify its rate and with a single |
| * parent, if we set disjoints range on the child and then the parent, |
| * the second will return an error. |
| * |
| * FIXME: clk_set_rate_range() only considers the current clock when |
| * evaluating whether ranges are disjoints and not the downstream clocks |
| * ranges. |
| */ |
| static void |
| clk_test_single_parent_mux_set_range_disjoint_parent_last(struct kunit *test) |
| { |
| struct clk_single_parent_ctx *ctx = test->priv; |
| struct clk_hw *hw = &ctx->hw; |
| struct clk *clk = clk_hw_get_clk(hw, NULL); |
| struct clk *parent; |
| int ret; |
| |
| kunit_skip(test, "This needs to be fixed in the core."); |
| |
| parent = clk_get_parent(clk); |
| KUNIT_ASSERT_PTR_NE(test, parent, NULL); |
| |
| ret = clk_set_rate_range(clk, 1000, 2000); |
| KUNIT_ASSERT_EQ(test, ret, 0); |
| |
| ret = clk_set_rate_range(parent, 3000, 4000); |
| KUNIT_EXPECT_LT(test, ret, 0); |
| |
| clk_put(clk); |
| } |
| |
| /* |
| * Test that for a clock that can't modify its rate and with a single |
| * parent, if we set a range on the parent and then call |
| * clk_round_rate(), the boundaries of the parent are taken into |
| * account. |
| */ |
| static void |
| clk_test_single_parent_mux_set_range_round_rate_parent_only(struct kunit *test) |
| { |
| struct clk_single_parent_ctx *ctx = test->priv; |
| struct clk_hw *hw = &ctx->hw; |
| struct clk *clk = clk_hw_get_clk(hw, NULL); |
| struct clk *parent; |
| long rate; |
| int ret; |
| |
| parent = clk_get_parent(clk); |
| KUNIT_ASSERT_PTR_NE(test, parent, NULL); |
| |
| ret = clk_set_rate_range(parent, DUMMY_CLOCK_RATE_1, DUMMY_CLOCK_RATE_2); |
| KUNIT_ASSERT_EQ(test, ret, 0); |
| |
| rate = clk_round_rate(clk, DUMMY_CLOCK_RATE_1 - 1000); |
| KUNIT_ASSERT_GT(test, rate, 0); |
| KUNIT_EXPECT_GE(test, rate, DUMMY_CLOCK_RATE_1); |
| KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_2); |
| |
| clk_put(clk); |
| } |
| |
| /* |
| * Test that for a clock that can't modify its rate and with a single |
| * parent, if we set a range on the parent and a more restrictive one on |
| * the child, and then call clk_round_rate(), the boundaries of the |
| * two clocks are taken into account. |
| */ |
| static void |
| clk_test_single_parent_mux_set_range_round_rate_child_smaller(struct kunit *test) |
| { |
| struct clk_single_parent_ctx *ctx = test->priv; |
| struct clk_hw *hw = &ctx->hw; |
| struct clk *clk = clk_hw_get_clk(hw, NULL); |
| struct clk *parent; |
| long rate; |
| int ret; |
| |
| parent = clk_get_parent(clk); |
| KUNIT_ASSERT_PTR_NE(test, parent, NULL); |
| |
| ret = clk_set_rate_range(parent, DUMMY_CLOCK_RATE_1, DUMMY_CLOCK_RATE_2); |
| KUNIT_ASSERT_EQ(test, ret, 0); |
| |
| ret = clk_set_rate_range(clk, DUMMY_CLOCK_RATE_1 + 1000, DUMMY_CLOCK_RATE_2 - 1000); |
| KUNIT_ASSERT_EQ(test, ret, 0); |
| |
| rate = clk_round_rate(clk, DUMMY_CLOCK_RATE_1 - 1000); |
| KUNIT_ASSERT_GT(test, rate, 0); |
| KUNIT_EXPECT_GE(test, rate, DUMMY_CLOCK_RATE_1 + 1000); |
| KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_2 - 1000); |
| |
| rate = clk_round_rate(clk, DUMMY_CLOCK_RATE_2 + 1000); |
| KUNIT_ASSERT_GT(test, rate, 0); |
| KUNIT_EXPECT_GE(test, rate, DUMMY_CLOCK_RATE_1 + 1000); |
| KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_2 - 1000); |
| |
| clk_put(clk); |
| } |
| |
| /* |
| * Test that for a clock that can't modify its rate and with a single |
| * parent, if we set a range on the child and a more restrictive one on |
| * the parent, and then call clk_round_rate(), the boundaries of the |
| * two clocks are taken into account. |
| */ |
| static void |
| clk_test_single_parent_mux_set_range_round_rate_parent_smaller(struct kunit *test) |
| { |
| struct clk_single_parent_ctx *ctx = test->priv; |
| struct clk_hw *hw = &ctx->hw; |
| struct clk *clk = clk_hw_get_clk(hw, NULL); |
| struct clk *parent; |
| long rate; |
| int ret; |
| |
| parent = clk_get_parent(clk); |
| KUNIT_ASSERT_PTR_NE(test, parent, NULL); |
| |
| ret = clk_set_rate_range(parent, DUMMY_CLOCK_RATE_1 + 1000, DUMMY_CLOCK_RATE_2 - 1000); |
| KUNIT_ASSERT_EQ(test, ret, 0); |
| |
| ret = clk_set_rate_range(clk, DUMMY_CLOCK_RATE_1, DUMMY_CLOCK_RATE_2); |
| KUNIT_ASSERT_EQ(test, ret, 0); |
| |
| rate = clk_round_rate(clk, DUMMY_CLOCK_RATE_1 - 1000); |
| KUNIT_ASSERT_GT(test, rate, 0); |
| KUNIT_EXPECT_GE(test, rate, DUMMY_CLOCK_RATE_1 + 1000); |
| KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_2 - 1000); |
| |
| rate = clk_round_rate(clk, DUMMY_CLOCK_RATE_2 + 1000); |
| KUNIT_ASSERT_GT(test, rate, 0); |
| KUNIT_EXPECT_GE(test, rate, DUMMY_CLOCK_RATE_1 + 1000); |
| KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_2 - 1000); |
| |
| clk_put(clk); |
| } |
| |
| static struct kunit_case clk_single_parent_mux_test_cases[] = { |
| KUNIT_CASE(clk_test_single_parent_mux_get_parent), |
| KUNIT_CASE(clk_test_single_parent_mux_has_parent), |
| KUNIT_CASE(clk_test_single_parent_mux_set_range_disjoint_child_last), |
| KUNIT_CASE(clk_test_single_parent_mux_set_range_disjoint_parent_last), |
| KUNIT_CASE(clk_test_single_parent_mux_set_range_round_rate_child_smaller), |
| KUNIT_CASE(clk_test_single_parent_mux_set_range_round_rate_parent_only), |
| KUNIT_CASE(clk_test_single_parent_mux_set_range_round_rate_parent_smaller), |
| {} |
| }; |
| |
| /* |
| * Test suite for a basic mux clock with one parent, with |
| * CLK_SET_RATE_PARENT on the child. |
| * |
| * These tests exercise the consumer API and check that the state of the |
| * child and parent are sane and consistent. |
| */ |
| static struct kunit_suite |
| clk_single_parent_mux_test_suite = { |
| .name = "clk-single-parent-mux-test", |
| .init = clk_single_parent_mux_test_init, |
| .exit = clk_single_parent_mux_test_exit, |
| .test_cases = clk_single_parent_mux_test_cases, |
| }; |
| |
| static int clk_orphan_transparent_single_parent_mux_test_init(struct kunit *test) |
| { |
| struct clk_single_parent_ctx *ctx; |
| struct clk_init_data init = { }; |
| const char * const parents[] = { "orphan_parent" }; |
| int ret; |
| |
| ctx = kunit_kzalloc(test, sizeof(*ctx), GFP_KERNEL); |
| if (!ctx) |
| return -ENOMEM; |
| test->priv = ctx; |
| |
| init.name = "test_orphan_dummy_parent"; |
| init.ops = &clk_dummy_single_parent_ops; |
| init.parent_names = parents; |
| init.num_parents = ARRAY_SIZE(parents); |
| init.flags = CLK_SET_RATE_PARENT; |
| ctx->hw.init = &init; |
| |
| ret = clk_hw_register(NULL, &ctx->hw); |
| if (ret) |
| return ret; |
| |
| memset(&init, 0, sizeof(init)); |
| init.name = "orphan_parent"; |
| init.ops = &clk_dummy_rate_ops; |
| ctx->parent_ctx.hw.init = &init; |
| ctx->parent_ctx.rate = DUMMY_CLOCK_INIT_RATE; |
| |
| ret = clk_hw_register(NULL, &ctx->parent_ctx.hw); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| /* |
| * Test that a mux-only clock, with an initial rate within a range, |
| * will still have the same rate after the range has been enforced. |
| * |
| * See: |
| * https://lore.kernel.org/linux-clk/7720158d-10a7-a17b-73a4-a8615c9c6d5c@collabora.com/ |
| */ |
| static void clk_test_orphan_transparent_parent_mux_set_range(struct kunit *test) |
| { |
| struct clk_single_parent_ctx *ctx = test->priv; |
| struct clk_hw *hw = &ctx->hw; |
| struct clk *clk = clk_hw_get_clk(hw, NULL); |
| unsigned long rate, new_rate; |
| |
| rate = clk_get_rate(clk); |
| KUNIT_ASSERT_GT(test, rate, 0); |
| |
| KUNIT_ASSERT_EQ(test, |
| clk_set_rate_range(clk, |
| ctx->parent_ctx.rate - 1000, |
| ctx->parent_ctx.rate + 1000), |
| 0); |
| |
| new_rate = clk_get_rate(clk); |
| KUNIT_ASSERT_GT(test, new_rate, 0); |
| KUNIT_EXPECT_EQ(test, rate, new_rate); |
| |
| clk_put(clk); |
| } |
| |
| static struct kunit_case clk_orphan_transparent_single_parent_mux_test_cases[] = { |
| KUNIT_CASE(clk_test_orphan_transparent_parent_mux_set_range), |
| {} |
| }; |
| |
| /* |
| * Test suite for a basic mux clock with one parent. The parent is |
| * registered after its child. The clock will thus be an orphan when |
| * registered, but will no longer be when the tests run. |
| * |
| * These tests make sure a clock that used to be orphan has a sane, |
| * consistent, behaviour. |
| */ |
| static struct kunit_suite clk_orphan_transparent_single_parent_test_suite = { |
| .name = "clk-orphan-transparent-single-parent-test", |
| .init = clk_orphan_transparent_single_parent_mux_test_init, |
| .exit = clk_single_parent_mux_test_exit, |
| .test_cases = clk_orphan_transparent_single_parent_mux_test_cases, |
| }; |
| |
| struct clk_single_parent_two_lvl_ctx { |
| struct clk_dummy_context parent_parent_ctx; |
| struct clk_dummy_context parent_ctx; |
| struct clk_hw hw; |
| }; |
| |
| static int |
| clk_orphan_two_level_root_last_test_init(struct kunit *test) |
| { |
| struct clk_single_parent_two_lvl_ctx *ctx; |
| int ret; |
| |
| ctx = kunit_kzalloc(test, sizeof(*ctx), GFP_KERNEL); |
| if (!ctx) |
| return -ENOMEM; |
| test->priv = ctx; |
| |
| ctx->parent_ctx.hw.init = |
| CLK_HW_INIT("intermediate-parent", |
| "root-parent", |
| &clk_dummy_single_parent_ops, |
| CLK_SET_RATE_PARENT); |
| ret = clk_hw_register(NULL, &ctx->parent_ctx.hw); |
| if (ret) |
| return ret; |
| |
| ctx->hw.init = |
| CLK_HW_INIT("test-clk", "intermediate-parent", |
| &clk_dummy_single_parent_ops, |
| CLK_SET_RATE_PARENT); |
| ret = clk_hw_register(NULL, &ctx->hw); |
| if (ret) |
| return ret; |
| |
| ctx->parent_parent_ctx.rate = DUMMY_CLOCK_INIT_RATE; |
| ctx->parent_parent_ctx.hw.init = |
| CLK_HW_INIT_NO_PARENT("root-parent", |
| &clk_dummy_rate_ops, |
| 0); |
| ret = clk_hw_register(NULL, &ctx->parent_parent_ctx.hw); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| static void |
| clk_orphan_two_level_root_last_test_exit(struct kunit *test) |
| { |
| struct clk_single_parent_two_lvl_ctx *ctx = test->priv; |
| |
| clk_hw_unregister(&ctx->hw); |
| clk_hw_unregister(&ctx->parent_ctx.hw); |
| clk_hw_unregister(&ctx->parent_parent_ctx.hw); |
| } |
| |
| /* |
| * Test that, for a clock whose parent used to be orphan, clk_get_rate() |
| * will return the proper rate. |
| */ |
| static void |
| clk_orphan_two_level_root_last_test_get_rate(struct kunit *test) |
| { |
| struct clk_single_parent_two_lvl_ctx *ctx = test->priv; |
| struct clk_hw *hw = &ctx->hw; |
| struct clk *clk = clk_hw_get_clk(hw, NULL); |
| unsigned long rate; |
| |
| rate = clk_get_rate(clk); |
| KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_INIT_RATE); |
| |
| clk_put(clk); |
| } |
| |
| /* |
| * Test that, for a clock whose parent used to be orphan, |
| * clk_set_rate_range() won't affect its rate if it is already within |
| * range. |
| * |
| * See (for Exynos 4210): |
| * https://lore.kernel.org/linux-clk/366a0232-bb4a-c357-6aa8-636e398e05eb@samsung.com/ |
| */ |
| static void |
| clk_orphan_two_level_root_last_test_set_range(struct kunit *test) |
| { |
| struct clk_single_parent_two_lvl_ctx *ctx = test->priv; |
| struct clk_hw *hw = &ctx->hw; |
| struct clk *clk = clk_hw_get_clk(hw, NULL); |
| unsigned long rate; |
| int ret; |
| |
| ret = clk_set_rate_range(clk, |
| DUMMY_CLOCK_INIT_RATE - 1000, |
| DUMMY_CLOCK_INIT_RATE + 1000); |
| KUNIT_ASSERT_EQ(test, ret, 0); |
| |
| rate = clk_get_rate(clk); |
| KUNIT_ASSERT_GT(test, rate, 0); |
| KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_INIT_RATE); |
| |
| clk_put(clk); |
| } |
| |
| static struct kunit_case |
| clk_orphan_two_level_root_last_test_cases[] = { |
| KUNIT_CASE(clk_orphan_two_level_root_last_test_get_rate), |
| KUNIT_CASE(clk_orphan_two_level_root_last_test_set_range), |
| {} |
| }; |
| |
| /* |
| * Test suite for a basic, transparent, clock with a parent that is also |
| * such a clock. The parent's parent is registered last, while the |
| * parent and its child are registered in that order. The intermediate |
| * and leaf clocks will thus be orphan when registered, but the leaf |
| * clock itself will always have its parent and will never be |
| * reparented. Indeed, it's only orphan because its parent is. |
| * |
| * These tests exercise the behaviour of the consumer API when dealing |
| * with an orphan clock, and how we deal with the transition to a valid |
| * parent. |
| */ |
| static struct kunit_suite |
| clk_orphan_two_level_root_last_test_suite = { |
| .name = "clk-orphan-two-level-root-last-test", |
| .init = clk_orphan_two_level_root_last_test_init, |
| .exit = clk_orphan_two_level_root_last_test_exit, |
| .test_cases = clk_orphan_two_level_root_last_test_cases, |
| }; |
| |
| /* |
| * Test that clk_set_rate_range won't return an error for a valid range |
| * and that it will make sure the rate of the clock is within the |
| * boundaries. |
| */ |
| static void clk_range_test_set_range(struct kunit *test) |
| { |
| struct clk_dummy_context *ctx = test->priv; |
| struct clk_hw *hw = &ctx->hw; |
| struct clk *clk = clk_hw_get_clk(hw, NULL); |
| unsigned long rate; |
| |
| KUNIT_ASSERT_EQ(test, |
| clk_set_rate_range(clk, |
| DUMMY_CLOCK_RATE_1, |
| DUMMY_CLOCK_RATE_2), |
| 0); |
| |
| rate = clk_get_rate(clk); |
| KUNIT_ASSERT_GT(test, rate, 0); |
| KUNIT_EXPECT_GE(test, rate, DUMMY_CLOCK_RATE_1); |
| KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_2); |
| |
| clk_put(clk); |
| } |
| |
| /* |
| * Test that calling clk_set_rate_range with a minimum rate higher than |
| * the maximum rate returns an error. |
| */ |
| static void clk_range_test_set_range_invalid(struct kunit *test) |
| { |
| struct clk_dummy_context *ctx = test->priv; |
| struct clk_hw *hw = &ctx->hw; |
| struct clk *clk = clk_hw_get_clk(hw, NULL); |
| |
| KUNIT_EXPECT_LT(test, |
| clk_set_rate_range(clk, |
| DUMMY_CLOCK_RATE_1 + 1000, |
| DUMMY_CLOCK_RATE_1), |
| 0); |
| |
| clk_put(clk); |
| } |
| |
| /* |
| * Test that users can't set multiple, disjoints, range that would be |
| * impossible to meet. |
| */ |
| static void clk_range_test_multiple_disjoints_range(struct kunit *test) |
| { |
| struct clk_dummy_context *ctx = test->priv; |
| struct clk_hw *hw = &ctx->hw; |
| struct clk *user1, *user2; |
| |
| user1 = clk_hw_get_clk(hw, NULL); |
| KUNIT_ASSERT_NOT_ERR_OR_NULL(test, user1); |
| |
| user2 = clk_hw_get_clk(hw, NULL); |
| KUNIT_ASSERT_NOT_ERR_OR_NULL(test, user2); |
| |
| KUNIT_ASSERT_EQ(test, |
| clk_set_rate_range(user1, 1000, 2000), |
| 0); |
| |
| KUNIT_EXPECT_LT(test, |
| clk_set_rate_range(user2, 3000, 4000), |
| 0); |
| |
| clk_put(user2); |
| clk_put(user1); |
| } |
| |
| /* |
| * Test that if our clock has some boundaries and we try to round a rate |
| * lower than the minimum, the returned rate will be within range. |
| */ |
| static void clk_range_test_set_range_round_rate_lower(struct kunit *test) |
| { |
| struct clk_dummy_context *ctx = test->priv; |
| struct clk_hw *hw = &ctx->hw; |
| struct clk *clk = clk_hw_get_clk(hw, NULL); |
| long rate; |
| |
| KUNIT_ASSERT_EQ(test, |
| clk_set_rate_range(clk, |
| DUMMY_CLOCK_RATE_1, |
| DUMMY_CLOCK_RATE_2), |
| 0); |
| |
| rate = clk_round_rate(clk, DUMMY_CLOCK_RATE_1 - 1000); |
| KUNIT_ASSERT_GT(test, rate, 0); |
| KUNIT_EXPECT_GE(test, rate, DUMMY_CLOCK_RATE_1); |
| KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_2); |
| |
| clk_put(clk); |
| } |
| |
| /* |
| * Test that if our clock has some boundaries and we try to set a rate |
| * higher than the maximum, the new rate will be within range. |
| */ |
| static void clk_range_test_set_range_set_rate_lower(struct kunit *test) |
| { |
| struct clk_dummy_context *ctx = test->priv; |
| struct clk_hw *hw = &ctx->hw; |
| struct clk *clk = clk_hw_get_clk(hw, NULL); |
| unsigned long rate; |
| |
| KUNIT_ASSERT_EQ(test, |
| clk_set_rate_range(clk, |
| DUMMY_CLOCK_RATE_1, |
| DUMMY_CLOCK_RATE_2), |
| 0); |
| |
| KUNIT_ASSERT_EQ(test, |
| clk_set_rate(clk, DUMMY_CLOCK_RATE_1 - 1000), |
| 0); |
| |
| rate = clk_get_rate(clk); |
| KUNIT_ASSERT_GT(test, rate, 0); |
| KUNIT_EXPECT_GE(test, rate, DUMMY_CLOCK_RATE_1); |
| KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_2); |
| |
| clk_put(clk); |
| } |
| |
| /* |
| * Test that if our clock has some boundaries and we try to round and |
| * set a rate lower than the minimum, the rate returned by |
| * clk_round_rate() will be consistent with the new rate set by |
| * clk_set_rate(). |
| */ |
| static void clk_range_test_set_range_set_round_rate_consistent_lower(struct kunit *test) |
| { |
| struct clk_dummy_context *ctx = test->priv; |
| struct clk_hw *hw = &ctx->hw; |
| struct clk *clk = clk_hw_get_clk(hw, NULL); |
| long rounded; |
| |
| KUNIT_ASSERT_EQ(test, |
| clk_set_rate_range(clk, |
| DUMMY_CLOCK_RATE_1, |
| DUMMY_CLOCK_RATE_2), |
| 0); |
| |
| rounded = clk_round_rate(clk, DUMMY_CLOCK_RATE_1 - 1000); |
| KUNIT_ASSERT_GT(test, rounded, 0); |
| |
| KUNIT_ASSERT_EQ(test, |
| clk_set_rate(clk, DUMMY_CLOCK_RATE_1 - 1000), |
| 0); |
| |
| KUNIT_EXPECT_EQ(test, rounded, clk_get_rate(clk)); |
| |
| clk_put(clk); |
| } |
| |
| /* |
| * Test that if our clock has some boundaries and we try to round a rate |
| * higher than the maximum, the returned rate will be within range. |
| */ |
| static void clk_range_test_set_range_round_rate_higher(struct kunit *test) |
| { |
| struct clk_dummy_context *ctx = test->priv; |
| struct clk_hw *hw = &ctx->hw; |
| struct clk *clk = clk_hw_get_clk(hw, NULL); |
| long rate; |
| |
| KUNIT_ASSERT_EQ(test, |
| clk_set_rate_range(clk, |
| DUMMY_CLOCK_RATE_1, |
| DUMMY_CLOCK_RATE_2), |
| 0); |
| |
| rate = clk_round_rate(clk, DUMMY_CLOCK_RATE_2 + 1000); |
| KUNIT_ASSERT_GT(test, rate, 0); |
| KUNIT_EXPECT_GE(test, rate, DUMMY_CLOCK_RATE_1); |
| KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_2); |
| |
| clk_put(clk); |
| } |
| |
| /* |
| * Test that if our clock has some boundaries and we try to set a rate |
| * higher than the maximum, the new rate will be within range. |
| */ |
| static void clk_range_test_set_range_set_rate_higher(struct kunit *test) |
| { |
| struct clk_dummy_context *ctx = test->priv; |
| struct clk_hw *hw = &ctx->hw; |
| struct clk *clk = clk_hw_get_clk(hw, NULL); |
| unsigned long rate; |
| |
| KUNIT_ASSERT_EQ(test, |
| clk_set_rate_range(clk, |
| DUMMY_CLOCK_RATE_1, |
| DUMMY_CLOCK_RATE_2), |
| 0); |
| |
| KUNIT_ASSERT_EQ(test, |
| clk_set_rate(clk, DUMMY_CLOCK_RATE_2 + 1000), |
| 0); |
| |
| rate = clk_get_rate(clk); |
| KUNIT_ASSERT_GT(test, rate, 0); |
| KUNIT_EXPECT_GE(test, rate, DUMMY_CLOCK_RATE_1); |
| KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_2); |
| |
| clk_put(clk); |
| } |
| |
| /* |
| * Test that if our clock has some boundaries and we try to round and |
| * set a rate higher than the maximum, the rate returned by |
| * clk_round_rate() will be consistent with the new rate set by |
| * clk_set_rate(). |
| */ |
| static void clk_range_test_set_range_set_round_rate_consistent_higher(struct kunit *test) |
| { |
| struct clk_dummy_context *ctx = test->priv; |
| struct clk_hw *hw = &ctx->hw; |
| struct clk *clk = clk_hw_get_clk(hw, NULL); |
| long rounded; |
| |
| KUNIT_ASSERT_EQ(test, |
| clk_set_rate_range(clk, |
| DUMMY_CLOCK_RATE_1, |
| DUMMY_CLOCK_RATE_2), |
| 0); |
| |
| rounded = clk_round_rate(clk, DUMMY_CLOCK_RATE_2 + 1000); |
| KUNIT_ASSERT_GT(test, rounded, 0); |
| |
| KUNIT_ASSERT_EQ(test, |
| clk_set_rate(clk, DUMMY_CLOCK_RATE_2 + 1000), |
| 0); |
| |
| KUNIT_EXPECT_EQ(test, rounded, clk_get_rate(clk)); |
| |
| clk_put(clk); |
| } |
| |
| /* |
| * Test that if our clock has a rate lower than the minimum set by a |
| * call to clk_set_rate_range(), the rate will be raised to match the |
| * new minimum. |
| * |
| * This assumes that clk_ops.determine_rate or clk_ops.round_rate won't |
| * modify the requested rate, which is our case in clk_dummy_rate_ops. |
| */ |
| static void clk_range_test_set_range_get_rate_raised(struct kunit *test) |
| { |
| struct clk_dummy_context *ctx = test->priv; |
| struct clk_hw *hw = &ctx->hw; |
| struct clk *clk = clk_hw_get_clk(hw, NULL); |
| unsigned long rate; |
| |
| KUNIT_ASSERT_EQ(test, |
| clk_set_rate(clk, DUMMY_CLOCK_RATE_1 - 1000), |
| 0); |
| |
| KUNIT_ASSERT_EQ(test, |
| clk_set_rate_range(clk, |
| DUMMY_CLOCK_RATE_1, |
| DUMMY_CLOCK_RATE_2), |
| 0); |
| |
| rate = clk_get_rate(clk); |
| KUNIT_ASSERT_GT(test, rate, 0); |
| KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_1); |
| |
| clk_put(clk); |
| } |
| |
| /* |
| * Test that if our clock has a rate higher than the maximum set by a |
| * call to clk_set_rate_range(), the rate will be lowered to match the |
| * new maximum. |
| * |
| * This assumes that clk_ops.determine_rate or clk_ops.round_rate won't |
| * modify the requested rate, which is our case in clk_dummy_rate_ops. |
| */ |
| static void clk_range_test_set_range_get_rate_lowered(struct kunit *test) |
| { |
| struct clk_dummy_context *ctx = test->priv; |
| struct clk_hw *hw = &ctx->hw; |
| struct clk *clk = clk_hw_get_clk(hw, NULL); |
| unsigned long rate; |
| |
| KUNIT_ASSERT_EQ(test, |
| clk_set_rate(clk, DUMMY_CLOCK_RATE_2 + 1000), |
| 0); |
| |
| KUNIT_ASSERT_EQ(test, |
| clk_set_rate_range(clk, |
| DUMMY_CLOCK_RATE_1, |
| DUMMY_CLOCK_RATE_2), |
| 0); |
| |
| rate = clk_get_rate(clk); |
| KUNIT_ASSERT_GT(test, rate, 0); |
| KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_2); |
| |
| clk_put(clk); |
| } |
| |
| static struct kunit_case clk_range_test_cases[] = { |
| KUNIT_CASE(clk_range_test_set_range), |
| KUNIT_CASE(clk_range_test_set_range_invalid), |
| KUNIT_CASE(clk_range_test_multiple_disjoints_range), |
| KUNIT_CASE(clk_range_test_set_range_round_rate_lower), |
| KUNIT_CASE(clk_range_test_set_range_set_rate_lower), |
| KUNIT_CASE(clk_range_test_set_range_set_round_rate_consistent_lower), |
| KUNIT_CASE(clk_range_test_set_range_round_rate_higher), |
| KUNIT_CASE(clk_range_test_set_range_set_rate_higher), |
| KUNIT_CASE(clk_range_test_set_range_set_round_rate_consistent_higher), |
| KUNIT_CASE(clk_range_test_set_range_get_rate_raised), |
| KUNIT_CASE(clk_range_test_set_range_get_rate_lowered), |
| {} |
| }; |
| |
| /* |
| * Test suite for a basic rate clock, without any parent. |
| * |
| * These tests exercise the rate range API: clk_set_rate_range(), |
| * clk_set_min_rate(), clk_set_max_rate(), clk_drop_range(). |
| */ |
| static struct kunit_suite clk_range_test_suite = { |
| .name = "clk-range-test", |
| .init = clk_test_init, |
| .exit = clk_test_exit, |
| .test_cases = clk_range_test_cases, |
| }; |
| |
| /* |
| * Test that if we have several subsequent calls to |
| * clk_set_rate_range(), the core will reevaluate whether a new rate is |
| * needed each and every time. |
| * |
| * With clk_dummy_maximize_rate_ops, this means that the rate will |
| * trail along the maximum as it evolves. |
| */ |
| static void clk_range_test_set_range_rate_maximized(struct kunit *test) |
| { |
| struct clk_dummy_context *ctx = test->priv; |
| struct clk_hw *hw = &ctx->hw; |
| struct clk *clk = clk_hw_get_clk(hw, NULL); |
| unsigned long rate; |
| |
| KUNIT_ASSERT_EQ(test, |
| clk_set_rate(clk, DUMMY_CLOCK_RATE_2 + 1000), |
| 0); |
| |
| KUNIT_ASSERT_EQ(test, |
| clk_set_rate_range(clk, |
| DUMMY_CLOCK_RATE_1, |
| DUMMY_CLOCK_RATE_2), |
| 0); |
| |
| rate = clk_get_rate(clk); |
| KUNIT_ASSERT_GT(test, rate, 0); |
| KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_2); |
| |
| KUNIT_ASSERT_EQ(test, |
| clk_set_rate_range(clk, |
| DUMMY_CLOCK_RATE_1, |
| DUMMY_CLOCK_RATE_2 - 1000), |
| 0); |
| |
| rate = clk_get_rate(clk); |
| KUNIT_ASSERT_GT(test, rate, 0); |
| KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_2 - 1000); |
| |
| KUNIT_ASSERT_EQ(test, |
| clk_set_rate_range(clk, |
| DUMMY_CLOCK_RATE_1, |
| DUMMY_CLOCK_RATE_2), |
| 0); |
| |
| rate = clk_get_rate(clk); |
| KUNIT_ASSERT_GT(test, rate, 0); |
| KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_2); |
| |
| clk_put(clk); |
| } |
| |
| /* |
| * Test that if we have several subsequent calls to |
| * clk_set_rate_range(), across multiple users, the core will reevaluate |
| * whether a new rate is needed each and every time. |
| * |
| * With clk_dummy_maximize_rate_ops, this means that the rate will |
| * trail along the maximum as it evolves. |
| */ |
| static void clk_range_test_multiple_set_range_rate_maximized(struct kunit *test) |
| { |
| struct clk_dummy_context *ctx = test->priv; |
| struct clk_hw *hw = &ctx->hw; |
| struct clk *clk = clk_hw_get_clk(hw, NULL); |
| struct clk *user1, *user2; |
| unsigned long rate; |
| |
| user1 = clk_hw_get_clk(hw, NULL); |
| KUNIT_ASSERT_NOT_ERR_OR_NULL(test, user1); |
| |
| user2 = clk_hw_get_clk(hw, NULL); |
| KUNIT_ASSERT_NOT_ERR_OR_NULL(test, user2); |
| |
| KUNIT_ASSERT_EQ(test, |
| clk_set_rate(clk, DUMMY_CLOCK_RATE_2 + 1000), |
| 0); |
| |
| KUNIT_ASSERT_EQ(test, |
| clk_set_rate_range(user1, |
| 0, |
| DUMMY_CLOCK_RATE_2), |
| 0); |
| |
| rate = clk_get_rate(clk); |
| KUNIT_ASSERT_GT(test, rate, 0); |
| KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_2); |
| |
| KUNIT_ASSERT_EQ(test, |
| clk_set_rate_range(user2, |
| 0, |
| DUMMY_CLOCK_RATE_1), |
| 0); |
| |
| rate = clk_get_rate(clk); |
| KUNIT_ASSERT_GT(test, rate, 0); |
| KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_1); |
| |
| KUNIT_ASSERT_EQ(test, |
| clk_drop_range(user2), |
| 0); |
| |
| rate = clk_get_rate(clk); |
| KUNIT_ASSERT_GT(test, rate, 0); |
| KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_2); |
| |
| clk_put(user2); |
| clk_put(user1); |
| clk_put(clk); |
| } |
| |
| /* |
| * Test that if we have several subsequent calls to |
| * clk_set_rate_range(), across multiple users, the core will reevaluate |
| * whether a new rate is needed, including when a user drop its clock. |
| * |
| * With clk_dummy_maximize_rate_ops, this means that the rate will |
| * trail along the maximum as it evolves. |
| */ |
| static void clk_range_test_multiple_set_range_rate_put_maximized(struct kunit *test) |
| { |
| struct clk_dummy_context *ctx = test->priv; |
| struct clk_hw *hw = &ctx->hw; |
| struct clk *clk = clk_hw_get_clk(hw, NULL); |
| struct clk *user1, *user2; |
| unsigned long rate; |
| |
| user1 = clk_hw_get_clk(hw, NULL); |
| KUNIT_ASSERT_NOT_ERR_OR_NULL(test, user1); |
| |
| user2 = clk_hw_get_clk(hw, NULL); |
| KUNIT_ASSERT_NOT_ERR_OR_NULL(test, user2); |
| |
| KUNIT_ASSERT_EQ(test, |
| clk_set_rate(clk, DUMMY_CLOCK_RATE_2 + 1000), |
| 0); |
| |
| KUNIT_ASSERT_EQ(test, |
| clk_set_rate_range(user1, |
| 0, |
| DUMMY_CLOCK_RATE_2), |
| 0); |
| |
| rate = clk_get_rate(clk); |
| KUNIT_ASSERT_GT(test, rate, 0); |
| KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_2); |
| |
| KUNIT_ASSERT_EQ(test, |
| clk_set_rate_range(user2, |
| 0, |
| DUMMY_CLOCK_RATE_1), |
| 0); |
| |
| rate = clk_get_rate(clk); |
| KUNIT_ASSERT_GT(test, rate, 0); |
| KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_1); |
| |
| clk_put(user2); |
| |
| rate = clk_get_rate(clk); |
| KUNIT_ASSERT_GT(test, rate, 0); |
| KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_2); |
| |
| clk_put(user1); |
| clk_put(clk); |
| } |
| |
| static struct kunit_case clk_range_maximize_test_cases[] = { |
| KUNIT_CASE(clk_range_test_set_range_rate_maximized), |
| KUNIT_CASE(clk_range_test_multiple_set_range_rate_maximized), |
| KUNIT_CASE(clk_range_test_multiple_set_range_rate_put_maximized), |
| {} |
| }; |
| |
| /* |
| * Test suite for a basic rate clock, without any parent. |
| * |
| * These tests exercise the rate range API: clk_set_rate_range(), |
| * clk_set_min_rate(), clk_set_max_rate(), clk_drop_range(), with a |
| * driver that will always try to run at the highest possible rate. |
| */ |
| static struct kunit_suite clk_range_maximize_test_suite = { |
| .name = "clk-range-maximize-test", |
| .init = clk_maximize_test_init, |
| .exit = clk_test_exit, |
| .test_cases = clk_range_maximize_test_cases, |
| }; |
| |
| /* |
| * Test that if we have several subsequent calls to |
| * clk_set_rate_range(), the core will reevaluate whether a new rate is |
| * needed each and every time. |
| * |
| * With clk_dummy_minimize_rate_ops, this means that the rate will |
| * trail along the minimum as it evolves. |
| */ |
| static void clk_range_test_set_range_rate_minimized(struct kunit *test) |
| { |
| struct clk_dummy_context *ctx = test->priv; |
| struct clk_hw *hw = &ctx->hw; |
| struct clk *clk = clk_hw_get_clk(hw, NULL); |
| unsigned long rate; |
| |
| KUNIT_ASSERT_EQ(test, |
| clk_set_rate(clk, DUMMY_CLOCK_RATE_1 - 1000), |
| 0); |
| |
| KUNIT_ASSERT_EQ(test, |
| clk_set_rate_range(clk, |
| DUMMY_CLOCK_RATE_1, |
| DUMMY_CLOCK_RATE_2), |
| 0); |
| |
| rate = clk_get_rate(clk); |
| KUNIT_ASSERT_GT(test, rate, 0); |
| KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_1); |
| |
| KUNIT_ASSERT_EQ(test, |
| clk_set_rate_range(clk, |
| DUMMY_CLOCK_RATE_1 + 1000, |
| DUMMY_CLOCK_RATE_2), |
| 0); |
| |
| rate = clk_get_rate(clk); |
| KUNIT_ASSERT_GT(test, rate, 0); |
| KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_1 + 1000); |
| |
| KUNIT_ASSERT_EQ(test, |
| clk_set_rate_range(clk, |
| DUMMY_CLOCK_RATE_1, |
| DUMMY_CLOCK_RATE_2), |
| 0); |
| |
| rate = clk_get_rate(clk); |
| KUNIT_ASSERT_GT(test, rate, 0); |
| KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_1); |
| |
| clk_put(clk); |
| } |
| |
| /* |
| * Test that if we have several subsequent calls to |
| * clk_set_rate_range(), across multiple users, the core will reevaluate |
| * whether a new rate is needed each and every time. |
| * |
| * With clk_dummy_minimize_rate_ops, this means that the rate will |
| * trail along the minimum as it evolves. |
| */ |
| static void clk_range_test_multiple_set_range_rate_minimized(struct kunit *test) |
| { |
| struct clk_dummy_context *ctx = test->priv; |
| struct clk_hw *hw = &ctx->hw; |
| struct clk *clk = clk_hw_get_clk(hw, NULL); |
| struct clk *user1, *user2; |
| unsigned long rate; |
| |
| user1 = clk_hw_get_clk(hw, NULL); |
| KUNIT_ASSERT_NOT_ERR_OR_NULL(test, user1); |
| |
| user2 = clk_hw_get_clk(hw, NULL); |
| KUNIT_ASSERT_NOT_ERR_OR_NULL(test, user2); |
| |
| KUNIT_ASSERT_EQ(test, |
| clk_set_rate_range(user1, |
| DUMMY_CLOCK_RATE_1, |
| ULONG_MAX), |
| 0); |
| |
| rate = clk_get_rate(clk); |
| KUNIT_ASSERT_GT(test, rate, 0); |
| KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_1); |
| |
| KUNIT_ASSERT_EQ(test, |
| clk_set_rate_range(user2, |
| DUMMY_CLOCK_RATE_2, |
| ULONG_MAX), |
| 0); |
| |
| rate = clk_get_rate(clk); |
| KUNIT_ASSERT_GT(test, rate, 0); |
| KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_2); |
| |
| KUNIT_ASSERT_EQ(test, |
| clk_drop_range(user2), |
| 0); |
| |
| rate = clk_get_rate(clk); |
| KUNIT_ASSERT_GT(test, rate, 0); |
| KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_1); |
| |
| clk_put(user2); |
| clk_put(user1); |
| clk_put(clk); |
| } |
| |
| /* |
| * Test that if we have several subsequent calls to |
| * clk_set_rate_range(), across multiple users, the core will reevaluate |
| * whether a new rate is needed, including when a user drop its clock. |
| * |
| * With clk_dummy_minimize_rate_ops, this means that the rate will |
| * trail along the minimum as it evolves. |
| */ |
| static void clk_range_test_multiple_set_range_rate_put_minimized(struct kunit *test) |
| { |
| struct clk_dummy_context *ctx = test->priv; |
| struct clk_hw *hw = &ctx->hw; |
| struct clk *clk = clk_hw_get_clk(hw, NULL); |
| struct clk *user1, *user2; |
| unsigned long rate; |
| |
| user1 = clk_hw_get_clk(hw, NULL); |
| KUNIT_ASSERT_NOT_ERR_OR_NULL(test, user1); |
| |
| user2 = clk_hw_get_clk(hw, NULL); |
| KUNIT_ASSERT_NOT_ERR_OR_NULL(test, user2); |
| |
| KUNIT_ASSERT_EQ(test, |
| clk_set_rate_range(user1, |
| DUMMY_CLOCK_RATE_1, |
| ULONG_MAX), |
| 0); |
| |
| rate = clk_get_rate(clk); |
| KUNIT_ASSERT_GT(test, rate, 0); |
| KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_1); |
| |
| KUNIT_ASSERT_EQ(test, |
| clk_set_rate_range(user2, |
| DUMMY_CLOCK_RATE_2, |
| ULONG_MAX), |
| 0); |
| |
| rate = clk_get_rate(clk); |
| KUNIT_ASSERT_GT(test, rate, 0); |
| KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_2); |
| |
| clk_put(user2); |
| |
| rate = clk_get_rate(clk); |
| KUNIT_ASSERT_GT(test, rate, 0); |
| KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_1); |
| |
| clk_put(user1); |
| clk_put(clk); |
| } |
| |
| static struct kunit_case clk_range_minimize_test_cases[] = { |
| KUNIT_CASE(clk_range_test_set_range_rate_minimized), |
| KUNIT_CASE(clk_range_test_multiple_set_range_rate_minimized), |
| KUNIT_CASE(clk_range_test_multiple_set_range_rate_put_minimized), |
| {} |
| }; |
| |
| /* |
| * Test suite for a basic rate clock, without any parent. |
| * |
| * These tests exercise the rate range API: clk_set_rate_range(), |
| * clk_set_min_rate(), clk_set_max_rate(), clk_drop_range(), with a |
| * driver that will always try to run at the lowest possible rate. |
| */ |
| static struct kunit_suite clk_range_minimize_test_suite = { |
| .name = "clk-range-minimize-test", |
| .init = clk_minimize_test_init, |
| .exit = clk_test_exit, |
| .test_cases = clk_range_minimize_test_cases, |
| }; |
| |
| struct clk_leaf_mux_ctx { |
| struct clk_multiple_parent_ctx mux_ctx; |
| struct clk_hw hw; |
| }; |
| |
| static int |
| clk_leaf_mux_set_rate_parent_test_init(struct kunit *test) |
| { |
| struct clk_leaf_mux_ctx *ctx; |
| const char *top_parents[2] = { "parent-0", "parent-1" }; |
| int ret; |
| |
| ctx = kunit_kzalloc(test, sizeof(*ctx), GFP_KERNEL); |
| if (!ctx) |
| return -ENOMEM; |
| test->priv = ctx; |
| |
| ctx->mux_ctx.parents_ctx[0].hw.init = CLK_HW_INIT_NO_PARENT("parent-0", |
| &clk_dummy_rate_ops, |
| 0); |
| ctx->mux_ctx.parents_ctx[0].rate = DUMMY_CLOCK_RATE_1; |
| ret = clk_hw_register(NULL, &ctx->mux_ctx.parents_ctx[0].hw); |
| if (ret) |
| return ret; |
| |
| ctx->mux_ctx.parents_ctx[1].hw.init = CLK_HW_INIT_NO_PARENT("parent-1", |
| &clk_dummy_rate_ops, |
| 0); |
| ctx->mux_ctx.parents_ctx[1].rate = DUMMY_CLOCK_RATE_2; |
| ret = clk_hw_register(NULL, &ctx->mux_ctx.parents_ctx[1].hw); |
| if (ret) |
| return ret; |
| |
| ctx->mux_ctx.current_parent = 0; |
| ctx->mux_ctx.hw.init = CLK_HW_INIT_PARENTS("test-mux", top_parents, |
| &clk_multiple_parents_mux_ops, |
| 0); |
| ret = clk_hw_register(NULL, &ctx->mux_ctx.hw); |
| if (ret) |
| return ret; |
| |
| ctx->hw.init = CLK_HW_INIT_HW("test-clock", &ctx->mux_ctx.hw, |
| &clk_dummy_single_parent_ops, |
| CLK_SET_RATE_PARENT); |
| ret = clk_hw_register(NULL, &ctx->hw); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| static void clk_leaf_mux_set_rate_parent_test_exit(struct kunit *test) |
| { |
| struct clk_leaf_mux_ctx *ctx = test->priv; |
| |
| clk_hw_unregister(&ctx->hw); |
| clk_hw_unregister(&ctx->mux_ctx.hw); |
| clk_hw_unregister(&ctx->mux_ctx.parents_ctx[0].hw); |
| clk_hw_unregister(&ctx->mux_ctx.parents_ctx[1].hw); |
| } |
| |
| /* |
| * Test that, for a clock that will forward any rate request to its |
| * parent, the rate request structure returned by __clk_determine_rate |
| * is sane and will be what we expect. |
| */ |
| static void clk_leaf_mux_set_rate_parent_determine_rate(struct kunit *test) |
| { |
| struct clk_leaf_mux_ctx *ctx = test->priv; |
| struct clk_hw *hw = &ctx->hw; |
| struct clk *clk = clk_hw_get_clk(hw, NULL); |
| struct clk_rate_request req; |
| unsigned long rate; |
| int ret; |
| |
| rate = clk_get_rate(clk); |
| KUNIT_ASSERT_EQ(test, rate, DUMMY_CLOCK_RATE_1); |
| |
| clk_hw_init_rate_request(hw, &req, DUMMY_CLOCK_RATE_2); |
| |
| ret = __clk_determine_rate(hw, &req); |
| KUNIT_ASSERT_EQ(test, ret, 0); |
| |
| KUNIT_EXPECT_EQ(test, req.rate, DUMMY_CLOCK_RATE_2); |
| KUNIT_EXPECT_EQ(test, req.best_parent_rate, DUMMY_CLOCK_RATE_2); |
| KUNIT_EXPECT_PTR_EQ(test, req.best_parent_hw, &ctx->mux_ctx.hw); |
| |
| clk_put(clk); |
| } |
| |
| static struct kunit_case clk_leaf_mux_set_rate_parent_test_cases[] = { |
| KUNIT_CASE(clk_leaf_mux_set_rate_parent_determine_rate), |
| {} |
| }; |
| |
| /* |
| * Test suite for a clock whose parent is a mux with multiple parents. |
| * The leaf clock has CLK_SET_RATE_PARENT, and will forward rate |
| * requests to the mux, which will then select which parent is the best |
| * fit for a given rate. |
| * |
| * These tests exercise the behaviour of muxes, and the proper selection |
| * of parents. |
| */ |
| static struct kunit_suite clk_leaf_mux_set_rate_parent_test_suite = { |
| .name = "clk-leaf-mux-set-rate-parent", |
| .init = clk_leaf_mux_set_rate_parent_test_init, |
| .exit = clk_leaf_mux_set_rate_parent_test_exit, |
| .test_cases = clk_leaf_mux_set_rate_parent_test_cases, |
| }; |
| |
| struct clk_mux_notifier_rate_change { |
| bool done; |
| unsigned long old_rate; |
| unsigned long new_rate; |
| wait_queue_head_t wq; |
| }; |
| |
| struct clk_mux_notifier_ctx { |
| struct clk_multiple_parent_ctx mux_ctx; |
| struct clk *clk; |
| struct notifier_block clk_nb; |
| struct clk_mux_notifier_rate_change pre_rate_change; |
| struct clk_mux_notifier_rate_change post_rate_change; |
| }; |
| |
| #define NOTIFIER_TIMEOUT_MS 100 |
| |
| static int clk_mux_notifier_callback(struct notifier_block *nb, |
| unsigned long action, void *data) |
| { |
| struct clk_notifier_data *clk_data = data; |
| struct clk_mux_notifier_ctx *ctx = container_of(nb, |
| struct clk_mux_notifier_ctx, |
| clk_nb); |
| |
| if (action & PRE_RATE_CHANGE) { |
| ctx->pre_rate_change.old_rate = clk_data->old_rate; |
| ctx->pre_rate_change.new_rate = clk_data->new_rate; |
| ctx->pre_rate_change.done = true; |
| wake_up_interruptible(&ctx->pre_rate_change.wq); |
| } |
| |
| if (action & POST_RATE_CHANGE) { |
| ctx->post_rate_change.old_rate = clk_data->old_rate; |
| ctx->post_rate_change.new_rate = clk_data->new_rate; |
| ctx->post_rate_change.done = true; |
| wake_up_interruptible(&ctx->post_rate_change.wq); |
| } |
| |
| return 0; |
| } |
| |
| static int clk_mux_notifier_test_init(struct kunit *test) |
| { |
| struct clk_mux_notifier_ctx *ctx; |
| const char *top_parents[2] = { "parent-0", "parent-1" }; |
| int ret; |
| |
| ctx = kunit_kzalloc(test, sizeof(*ctx), GFP_KERNEL); |
| if (!ctx) |
| return -ENOMEM; |
| test->priv = ctx; |
| ctx->clk_nb.notifier_call = clk_mux_notifier_callback; |
| init_waitqueue_head(&ctx->pre_rate_change.wq); |
| init_waitqueue_head(&ctx->post_rate_change.wq); |
| |
| ctx->mux_ctx.parents_ctx[0].hw.init = CLK_HW_INIT_NO_PARENT("parent-0", |
| &clk_dummy_rate_ops, |
| 0); |
| ctx->mux_ctx.parents_ctx[0].rate = DUMMY_CLOCK_RATE_1; |
| ret = clk_hw_register(NULL, &ctx->mux_ctx.parents_ctx[0].hw); |
| if (ret) |
| return ret; |
| |
| ctx->mux_ctx.parents_ctx[1].hw.init = CLK_HW_INIT_NO_PARENT("parent-1", |
| &clk_dummy_rate_ops, |
| 0); |
| ctx->mux_ctx.parents_ctx[1].rate = DUMMY_CLOCK_RATE_2; |
| ret = clk_hw_register(NULL, &ctx->mux_ctx.parents_ctx[1].hw); |
| if (ret) |
| return ret; |
| |
| ctx->mux_ctx.current_parent = 0; |
| ctx->mux_ctx.hw.init = CLK_HW_INIT_PARENTS("test-mux", top_parents, |
| &clk_multiple_parents_mux_ops, |
| 0); |
| ret = clk_hw_register(NULL, &ctx->mux_ctx.hw); |
| if (ret) |
| return ret; |
| |
| ctx->clk = clk_hw_get_clk(&ctx->mux_ctx.hw, NULL); |
| ret = clk_notifier_register(ctx->clk, &ctx->clk_nb); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| static void clk_mux_notifier_test_exit(struct kunit *test) |
| { |
| struct clk_mux_notifier_ctx *ctx = test->priv; |
| struct clk *clk = ctx->clk; |
| |
| clk_notifier_unregister(clk, &ctx->clk_nb); |
| clk_put(clk); |
| |
| clk_hw_unregister(&ctx->mux_ctx.hw); |
| clk_hw_unregister(&ctx->mux_ctx.parents_ctx[0].hw); |
| clk_hw_unregister(&ctx->mux_ctx.parents_ctx[1].hw); |
| } |
| |
| /* |
| * Test that if the we have a notifier registered on a mux, the core |
| * will notify us when we switch to another parent, and with the proper |
| * old and new rates. |
| */ |
| static void clk_mux_notifier_set_parent_test(struct kunit *test) |
| { |
| struct clk_mux_notifier_ctx *ctx = test->priv; |
| struct clk_hw *hw = &ctx->mux_ctx.hw; |
| struct clk *clk = clk_hw_get_clk(hw, NULL); |
| struct clk *new_parent = clk_hw_get_clk(&ctx->mux_ctx.parents_ctx[1].hw, NULL); |
| int ret; |
| |
| ret = clk_set_parent(clk, new_parent); |
| KUNIT_ASSERT_EQ(test, ret, 0); |
| |
| ret = wait_event_interruptible_timeout(ctx->pre_rate_change.wq, |
| ctx->pre_rate_change.done, |
| msecs_to_jiffies(NOTIFIER_TIMEOUT_MS)); |
| KUNIT_ASSERT_GT(test, ret, 0); |
| |
| KUNIT_EXPECT_EQ(test, ctx->pre_rate_change.old_rate, DUMMY_CLOCK_RATE_1); |
| KUNIT_EXPECT_EQ(test, ctx->pre_rate_change.new_rate, DUMMY_CLOCK_RATE_2); |
| |
| ret = wait_event_interruptible_timeout(ctx->post_rate_change.wq, |
| ctx->post_rate_change.done, |
| msecs_to_jiffies(NOTIFIER_TIMEOUT_MS)); |
| KUNIT_ASSERT_GT(test, ret, 0); |
| |
| KUNIT_EXPECT_EQ(test, ctx->post_rate_change.old_rate, DUMMY_CLOCK_RATE_1); |
| KUNIT_EXPECT_EQ(test, ctx->post_rate_change.new_rate, DUMMY_CLOCK_RATE_2); |
| |
| clk_put(new_parent); |
| clk_put(clk); |
| } |
| |
| static struct kunit_case clk_mux_notifier_test_cases[] = { |
| KUNIT_CASE(clk_mux_notifier_set_parent_test), |
| {} |
| }; |
| |
| /* |
| * Test suite for a mux with multiple parents, and a notifier registered |
| * on the mux. |
| * |
| * These tests exercise the behaviour of notifiers. |
| */ |
| static struct kunit_suite clk_mux_notifier_test_suite = { |
| .name = "clk-mux-notifier", |
| .init = clk_mux_notifier_test_init, |
| .exit = clk_mux_notifier_test_exit, |
| .test_cases = clk_mux_notifier_test_cases, |
| }; |
| |
| static int |
| clk_mux_no_reparent_test_init(struct kunit *test) |
| { |
| struct clk_multiple_parent_ctx *ctx; |
| const char *parents[2] = { "parent-0", "parent-1"}; |
| int ret; |
| |
| ctx = kunit_kzalloc(test, sizeof(*ctx), GFP_KERNEL); |
| if (!ctx) |
| return -ENOMEM; |
| test->priv = ctx; |
| |
| ctx->parents_ctx[0].hw.init = CLK_HW_INIT_NO_PARENT("parent-0", |
| &clk_dummy_rate_ops, |
| 0); |
| ctx->parents_ctx[0].rate = DUMMY_CLOCK_RATE_1; |
| ret = clk_hw_register(NULL, &ctx->parents_ctx[0].hw); |
| if (ret) |
| return ret; |
| |
| ctx->parents_ctx[1].hw.init = CLK_HW_INIT_NO_PARENT("parent-1", |
| &clk_dummy_rate_ops, |
| 0); |
| ctx->parents_ctx[1].rate = DUMMY_CLOCK_RATE_2; |
| ret = clk_hw_register(NULL, &ctx->parents_ctx[1].hw); |
| if (ret) |
| return ret; |
| |
| ctx->current_parent = 0; |
| ctx->hw.init = CLK_HW_INIT_PARENTS("test-mux", parents, |
| &clk_multiple_parents_no_reparent_mux_ops, |
| 0); |
| ret = clk_hw_register(NULL, &ctx->hw); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| static void |
| clk_mux_no_reparent_test_exit(struct kunit *test) |
| { |
| struct clk_multiple_parent_ctx *ctx = test->priv; |
| |
| clk_hw_unregister(&ctx->hw); |
| clk_hw_unregister(&ctx->parents_ctx[0].hw); |
| clk_hw_unregister(&ctx->parents_ctx[1].hw); |
| } |
| |
| /* |
| * Test that if the we have a mux that cannot change parent and we call |
| * clk_round_rate() on it with a rate that should cause it to change |
| * parent, it won't. |
| */ |
| static void clk_mux_no_reparent_round_rate(struct kunit *test) |
| { |
| struct clk_multiple_parent_ctx *ctx = test->priv; |
| struct clk_hw *hw = &ctx->hw; |
| struct clk *clk = clk_hw_get_clk(hw, NULL); |
| struct clk *other_parent, *parent; |
| unsigned long other_parent_rate; |
| unsigned long parent_rate; |
| long rounded_rate; |
| |
| parent = clk_get_parent(clk); |
| KUNIT_ASSERT_PTR_NE(test, parent, NULL); |
| |
| parent_rate = clk_get_rate(parent); |
| KUNIT_ASSERT_GT(test, parent_rate, 0); |
| |
| other_parent = clk_hw_get_clk(&ctx->parents_ctx[1].hw, NULL); |
| KUNIT_ASSERT_NOT_ERR_OR_NULL(test, other_parent); |
| KUNIT_ASSERT_FALSE(test, clk_is_match(parent, other_parent)); |
| |
| other_parent_rate = clk_get_rate(other_parent); |
| KUNIT_ASSERT_GT(test, other_parent_rate, 0); |
| clk_put(other_parent); |
| |
| rounded_rate = clk_round_rate(clk, other_parent_rate); |
| KUNIT_ASSERT_GT(test, rounded_rate, 0); |
| KUNIT_EXPECT_EQ(test, rounded_rate, parent_rate); |
| |
| clk_put(clk); |
| } |
| |
| /* |
| * Test that if the we have a mux that cannot change parent and we call |
| * clk_set_rate() on it with a rate that should cause it to change |
| * parent, it won't. |
| */ |
| static void clk_mux_no_reparent_set_rate(struct kunit *test) |
| { |
| struct clk_multiple_parent_ctx *ctx = test->priv; |
| struct clk_hw *hw = &ctx->hw; |
| struct clk *clk = clk_hw_get_clk(hw, NULL); |
| struct clk *other_parent, *parent; |
| unsigned long other_parent_rate; |
| unsigned long parent_rate; |
| unsigned long rate; |
| int ret; |
| |
| parent = clk_get_parent(clk); |
| KUNIT_ASSERT_PTR_NE(test, parent, NULL); |
| |
| parent_rate = clk_get_rate(parent); |
| KUNIT_ASSERT_GT(test, parent_rate, 0); |
| |
| other_parent = clk_hw_get_clk(&ctx->parents_ctx[1].hw, NULL); |
| KUNIT_ASSERT_NOT_ERR_OR_NULL(test, other_parent); |
| KUNIT_ASSERT_FALSE(test, clk_is_match(parent, other_parent)); |
| |
| other_parent_rate = clk_get_rate(other_parent); |
| KUNIT_ASSERT_GT(test, other_parent_rate, 0); |
| clk_put(other_parent); |
| |
| ret = clk_set_rate(clk, other_parent_rate); |
| KUNIT_ASSERT_EQ(test, ret, 0); |
| |
| rate = clk_get_rate(clk); |
| KUNIT_ASSERT_GT(test, rate, 0); |
| KUNIT_EXPECT_EQ(test, rate, parent_rate); |
| |
| clk_put(clk); |
| } |
| |
| static struct kunit_case clk_mux_no_reparent_test_cases[] = { |
| KUNIT_CASE(clk_mux_no_reparent_round_rate), |
| KUNIT_CASE(clk_mux_no_reparent_set_rate), |
| {} |
| }; |
| |
| /* |
| * Test suite for a clock mux that isn't allowed to change parent, using |
| * the clk_hw_determine_rate_no_reparent() helper. |
| * |
| * These tests exercise that helper, and the proper selection of |
| * rates and parents. |
| */ |
| static struct kunit_suite clk_mux_no_reparent_test_suite = { |
| .name = "clk-mux-no-reparent", |
| .init = clk_mux_no_reparent_test_init, |
| .exit = clk_mux_no_reparent_test_exit, |
| .test_cases = clk_mux_no_reparent_test_cases, |
| }; |
| |
| kunit_test_suites( |
| &clk_leaf_mux_set_rate_parent_test_suite, |
| &clk_test_suite, |
| &clk_multiple_parents_mux_test_suite, |
| &clk_mux_no_reparent_test_suite, |
| &clk_mux_notifier_test_suite, |
| &clk_orphan_transparent_multiple_parent_mux_test_suite, |
| &clk_orphan_transparent_single_parent_test_suite, |
| &clk_orphan_two_level_root_last_test_suite, |
| &clk_range_test_suite, |
| &clk_range_maximize_test_suite, |
| &clk_range_minimize_test_suite, |
| &clk_single_parent_mux_test_suite, |
| &clk_uncached_test_suite |
| ); |
| MODULE_LICENSE("GPL v2"); |