blob: e04b1c0c0ebbfb59e6e75318ebfaef1dfbe02997 [file] [log] [blame]
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Copyright (C) 2021 MediaTek Inc.
* Authors: Sam.Shih <sam.shih@mediatek.com>
* Frank Wunderlich <frank-w@public-files.de>
* Daniel Golle <daniel@makrotopia.org>
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/mt65xx.h>
#include "mt7986a.dtsi"
/ {
model = "Bananapi BPI-R3";
chassis-type = "embedded";
compatible = "bananapi,bpi-r3", "mediatek,mt7986a";
aliases {
serial0 = &uart0;
ethernet0 = &gmac0;
ethernet1 = &gmac1;
};
chosen {
stdout-path = "serial0:115200n8";
};
dcin: regulator-12vd {
compatible = "regulator-fixed";
regulator-name = "12vd";
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
regulator-boot-on;
regulator-always-on;
};
fan: pwm-fan {
compatible = "pwm-fan";
#cooling-cells = <2>;
/* cooling level (0, 1, 2) - pwm inverted */
cooling-levels = <255 96 0>;
pwms = <&pwm 0 10000>;
status = "okay";
};
gpio-keys {
compatible = "gpio-keys";
reset-key {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&pio 9 GPIO_ACTIVE_LOW>;
};
wps-key {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&pio 10 GPIO_ACTIVE_LOW>;
};
};
/* i2c of the left SFP cage (wan) */
i2c_sfp1: i2c-gpio-0 {
compatible = "i2c-gpio";
sda-gpios = <&pio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&pio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
i2c-gpio,delay-us = <2>;
#address-cells = <1>;
#size-cells = <0>;
};
/* i2c of the right SFP cage (lan) */
i2c_sfp2: i2c-gpio-1 {
compatible = "i2c-gpio";
sda-gpios = <&pio 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&pio 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
i2c-gpio,delay-us = <2>;
#address-cells = <1>;
#size-cells = <0>;
};
leds {
compatible = "gpio-leds";
green_led: led-0 {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_POWER;
gpios = <&pio 69 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
blue_led: led-1 {
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_STATUS;
gpios = <&pio 86 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
};
reg_1p8v: regulator-1p8v {
compatible = "regulator-fixed";
regulator-name = "1.8vd";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
vin-supply = <&dcin>;
};
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "3.3vd";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
vin-supply = <&dcin>;
};
/* left SFP cage (wan) */
sfp1: sfp-1 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp1>;
los-gpios = <&pio 46 GPIO_ACTIVE_HIGH>;
maximum-power-milliwatt = <3000>;
mod-def0-gpios = <&pio 49 GPIO_ACTIVE_LOW>;
tx-disable-gpios = <&pio 20 GPIO_ACTIVE_HIGH>;
tx-fault-gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
};
/* right SFP cage (lan) */
sfp2: sfp-2 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp2>;
los-gpios = <&pio 31 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&pio 47 GPIO_ACTIVE_LOW>;
maximum-power-milliwatt = <3000>;
tx-disable-gpios = <&pio 15 GPIO_ACTIVE_HIGH>;
tx-fault-gpios = <&pio 48 GPIO_ACTIVE_HIGH>;
};
};
&cpu_thermal {
cooling-maps {
cpu-active-high {
/* active: set fan to cooling level 2 */
cooling-device = <&fan 2 2>;
trip = <&cpu_trip_active_high>;
};
cpu-active-med {
/* active: set fan to cooling level 1 */
cooling-device = <&fan 1 1>;
trip = <&cpu_trip_active_med>;
};
cpu-active-low {
/* active: set fan to cooling level 0 */
cooling-device = <&fan 0 0>;
trip = <&cpu_trip_active_low>;
};
};
};
&crypto {
status = "okay";
};
&eth {
status = "okay";
gmac0: mac@0 {
compatible = "mediatek,eth-mac";
reg = <0>;
phy-mode = "2500base-x";
fixed-link {
speed = <2500>;
full-duplex;
pause;
};
};
gmac1: mac@1 {
compatible = "mediatek,eth-mac";
reg = <1>;
phy-mode = "2500base-x";
sfp = <&sfp1>;
managed = "in-band-status";
};
mdio: mdio-bus {
#address-cells = <1>;
#size-cells = <0>;
};
};
&mdio {
switch: switch@31 {
compatible = "mediatek,mt7531";
reg = <31>;
interrupt-controller;
#interrupt-cells = <1>;
interrupts-extended = <&pio 66 IRQ_TYPE_LEVEL_HIGH>;
reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
};
};
&mmc0 {
pinctrl-names = "default", "state_uhs";
pinctrl-0 = <&mmc0_pins_default>;
pinctrl-1 = <&mmc0_pins_uhs>;
vmmc-supply = <&reg_3p3v>;
vqmmc-supply = <&reg_1p8v>;
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c_pins>;
status = "okay";
};
&pcie {
pinctrl-names = "default";
pinctrl-0 = <&pcie_pins>;
status = "okay";
};
&pcie_phy {
status = "okay";
};
&pio {
i2c_pins: i2c-pins {
mux {
function = "i2c";
groups = "i2c";
};
};
mmc0_pins_default: mmc0-pins {
mux {
function = "emmc";
groups = "emmc_51";
};
conf-cmd-dat {
pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
"EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
"EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
input-enable;
drive-strength = <4>;
bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
};
conf-clk {
pins = "EMMC_CK";
drive-strength = <6>;
bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
};
conf-ds {
pins = "EMMC_DSL";
bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
};
conf-rst {
pins = "EMMC_RSTB";
drive-strength = <4>;
bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
};
};
mmc0_pins_uhs: mmc0-uhs-pins {
mux {
function = "emmc";
groups = "emmc_51";
};
conf-cmd-dat {
pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
"EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
"EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
input-enable;
drive-strength = <4>;
bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
};
conf-clk {
pins = "EMMC_CK";
drive-strength = <6>;
bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
};
conf-ds {
pins = "EMMC_DSL";
bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
};
conf-rst {
pins = "EMMC_RSTB";
drive-strength = <4>;
bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
};
};
pcie_pins: pcie-pins {
mux {
function = "pcie";
groups = "pcie_clk", "pcie_pereset";
};
};
pwm_pins: pwm-pins {
mux {
function = "pwm";
groups = "pwm0", "pwm1_0";
};
};
spi_flash_pins: spi-flash-pins {
mux {
function = "spi";
groups = "spi0", "spi0_wp_hold";
};
};
spic_pins: spic-pins {
mux {
function = "spi";
groups = "spi1_0";
};
};
uart1_pins: uart1-pins {
mux {
function = "uart";
groups = "uart1_rx_tx";
};
};
uart2_pins: uart2-pins {
mux {
function = "uart";
groups = "uart2_0_rx_tx";
};
};
wf_2g_5g_pins: wf-2g-5g-pins {
mux {
function = "wifi";
groups = "wf_2g", "wf_5g";
};
conf {
pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
"WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
"WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
"WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
"WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
"WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
"WF1_TOP_CLK", "WF1_TOP_DATA";
drive-strength = <4>;
};
};
wf_dbdc_pins: wf-dbdc-pins {
mux {
function = "wifi";
groups = "wf_dbdc";
};
conf {
pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
"WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
"WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
"WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
"WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
"WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
"WF1_TOP_CLK", "WF1_TOP_DATA";
drive-strength = <4>;
};
};
wf_led_pins: wf-led-pins {
mux {
function = "led";
groups = "wifi_led";
};
};
};
&pwm {
pinctrl-names = "default";
pinctrl-0 = <&pwm_pins>;
status = "okay";
};
&spi0 {
pinctrl-names = "default";
pinctrl-0 = <&spi_flash_pins>;
status = "okay";
};
&spi1 {
pinctrl-names = "default";
pinctrl-0 = <&spic_pins>;
status = "okay";
};
&ssusb {
status = "okay";
};
&switch {
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "wan";
};
port@1 {
reg = <1>;
label = "lan0";
};
port@2 {
reg = <2>;
label = "lan1";
};
port@3 {
reg = <3>;
label = "lan2";
};
port@4 {
reg = <4>;
label = "lan3";
};
port5: port@5 {
reg = <5>;
label = "lan4";
phy-mode = "2500base-x";
sfp = <&sfp2>;
managed = "in-band-status";
};
port@6 {
reg = <6>;
label = "cpu";
ethernet = <&gmac0>;
phy-mode = "2500base-x";
fixed-link {
speed = <2500>;
full-duplex;
pause;
};
};
};
};
&trng {
status = "okay";
};
&uart0 {
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&uart2_pins>;
status = "okay";
};
&usb_phy {
status = "okay";
};
&watchdog {
status = "okay";
};
&wifi {
status = "okay";
pinctrl-names = "default", "dbdc";
pinctrl-0 = <&wf_2g_5g_pins>, <&wf_led_pins>;
pinctrl-1 = <&wf_dbdc_pins>, <&wf_led_pins>;
led {
led-active-low;
};
};