| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright 2007, Olof Johansson, PA Semi |
| * |
| * Based on arch/powerpc/sysdev/mpic_u3msi.c: |
| * |
| * Copyright 2006, Segher Boessenkool, IBM Corporation. |
| * Copyright 2006-2007, Michael Ellerman, IBM Corporation. |
| */ |
| |
| #include <linux/irq.h> |
| #include <linux/irqdomain.h> |
| #include <linux/msi.h> |
| #include <asm/mpic.h> |
| #include <asm/hw_irq.h> |
| #include <asm/ppc-pci.h> |
| #include <asm/msi_bitmap.h> |
| |
| #include <sysdev/mpic.h> |
| |
| /* Allocate 16 interrupts per device, to give an alignment of 16, |
| * since that's the size of the grouping w.r.t. affinity. If someone |
| * needs more than 32 MSI's down the road we'll have to rethink this, |
| * but it should be OK for now. |
| */ |
| #define ALLOC_CHUNK 16 |
| |
| #define PASEMI_MSI_ADDR 0xfc080000 |
| |
| /* A bit ugly, can we get this from the pci_dev somehow? */ |
| static struct mpic *msi_mpic; |
| |
| |
| static void mpic_pasemi_msi_mask_irq(struct irq_data *data) |
| { |
| pr_debug("mpic_pasemi_msi_mask_irq %d\n", data->irq); |
| pci_msi_mask_irq(data); |
| mpic_mask_irq(data); |
| } |
| |
| static void mpic_pasemi_msi_unmask_irq(struct irq_data *data) |
| { |
| pr_debug("mpic_pasemi_msi_unmask_irq %d\n", data->irq); |
| mpic_unmask_irq(data); |
| pci_msi_unmask_irq(data); |
| } |
| |
| static struct irq_chip mpic_pasemi_msi_chip = { |
| .irq_shutdown = mpic_pasemi_msi_mask_irq, |
| .irq_mask = mpic_pasemi_msi_mask_irq, |
| .irq_unmask = mpic_pasemi_msi_unmask_irq, |
| .irq_eoi = mpic_end_irq, |
| .irq_set_type = mpic_set_irq_type, |
| .irq_set_affinity = mpic_set_affinity, |
| .name = "PASEMI-MSI", |
| }; |
| |
| static void pasemi_msi_teardown_msi_irqs(struct pci_dev *pdev) |
| { |
| struct msi_desc *entry; |
| irq_hw_number_t hwirq; |
| |
| pr_debug("pasemi_msi_teardown_msi_irqs, pdev %p\n", pdev); |
| |
| msi_for_each_desc(entry, &pdev->dev, MSI_DESC_ASSOCIATED) { |
| hwirq = virq_to_hw(entry->irq); |
| irq_set_msi_desc(entry->irq, NULL); |
| irq_dispose_mapping(entry->irq); |
| entry->irq = 0; |
| msi_bitmap_free_hwirqs(&msi_mpic->msi_bitmap, hwirq, ALLOC_CHUNK); |
| } |
| } |
| |
| static int pasemi_msi_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type) |
| { |
| unsigned int virq; |
| struct msi_desc *entry; |
| struct msi_msg msg; |
| int hwirq; |
| |
| if (type == PCI_CAP_ID_MSIX) |
| pr_debug("pasemi_msi: MSI-X untested, trying anyway\n"); |
| pr_debug("pasemi_msi_setup_msi_irqs, pdev %p nvec %d type %d\n", |
| pdev, nvec, type); |
| |
| msg.address_hi = 0; |
| msg.address_lo = PASEMI_MSI_ADDR; |
| |
| msi_for_each_desc(entry, &pdev->dev, MSI_DESC_NOTASSOCIATED) { |
| /* Allocate 16 interrupts for now, since that's the grouping for |
| * affinity. This can be changed later if it turns out 32 is too |
| * few MSIs for someone, but restrictions will apply to how the |
| * sources can be changed independently. |
| */ |
| hwirq = msi_bitmap_alloc_hwirqs(&msi_mpic->msi_bitmap, |
| ALLOC_CHUNK); |
| if (hwirq < 0) { |
| pr_debug("pasemi_msi: failed allocating hwirq\n"); |
| return hwirq; |
| } |
| |
| virq = irq_create_mapping(msi_mpic->irqhost, hwirq); |
| if (!virq) { |
| pr_debug("pasemi_msi: failed mapping hwirq 0x%x\n", |
| hwirq); |
| msi_bitmap_free_hwirqs(&msi_mpic->msi_bitmap, hwirq, |
| ALLOC_CHUNK); |
| return -ENOSPC; |
| } |
| |
| /* Vector on MSI is really an offset, the hardware adds |
| * it to the value written at the magic address. So set |
| * it to 0 to remain sane. |
| */ |
| mpic_set_vector(virq, 0); |
| |
| irq_set_msi_desc(virq, entry); |
| irq_set_chip(virq, &mpic_pasemi_msi_chip); |
| irq_set_irq_type(virq, IRQ_TYPE_EDGE_RISING); |
| |
| pr_debug("pasemi_msi: allocated virq 0x%x (hw 0x%x) " \ |
| "addr 0x%x\n", virq, hwirq, msg.address_lo); |
| |
| /* Likewise, the device writes [0...511] into the target |
| * register to generate MSI [512...1023] |
| */ |
| msg.data = hwirq-0x200; |
| pci_write_msi_msg(virq, &msg); |
| } |
| |
| return 0; |
| } |
| |
| int __init mpic_pasemi_msi_init(struct mpic *mpic) |
| { |
| int rc; |
| struct pci_controller *phb; |
| struct device_node *of_node; |
| |
| of_node = irq_domain_get_of_node(mpic->irqhost); |
| if (!of_node || |
| !of_device_is_compatible(of_node, |
| "pasemi,pwrficient-openpic")) |
| return -ENODEV; |
| |
| rc = mpic_msi_init_allocator(mpic); |
| if (rc) { |
| pr_debug("pasemi_msi: Error allocating bitmap!\n"); |
| return rc; |
| } |
| |
| pr_debug("pasemi_msi: Registering PA Semi MPIC MSI callbacks\n"); |
| |
| msi_mpic = mpic; |
| list_for_each_entry(phb, &hose_list, list_node) { |
| WARN_ON(phb->controller_ops.setup_msi_irqs); |
| phb->controller_ops.setup_msi_irqs = pasemi_msi_setup_msi_irqs; |
| phb->controller_ops.teardown_msi_irqs = pasemi_msi_teardown_msi_irqs; |
| } |
| |
| return 0; |
| } |