| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Code for looking up block devices in the early boot code before mounting the |
| * root file system. |
| */ |
| #include <linux/blkdev.h> |
| #include <linux/ctype.h> |
| |
| struct uuidcmp { |
| const char *uuid; |
| int len; |
| }; |
| |
| /** |
| * match_dev_by_uuid - callback for finding a partition using its uuid |
| * @dev: device passed in by the caller |
| * @data: opaque pointer to the desired struct uuidcmp to match |
| * |
| * Returns 1 if the device matches, and 0 otherwise. |
| */ |
| static int __init match_dev_by_uuid(struct device *dev, const void *data) |
| { |
| struct block_device *bdev = dev_to_bdev(dev); |
| const struct uuidcmp *cmp = data; |
| |
| if (!bdev->bd_meta_info || |
| strncasecmp(cmp->uuid, bdev->bd_meta_info->uuid, cmp->len)) |
| return 0; |
| return 1; |
| } |
| |
| /** |
| * devt_from_partuuid - looks up the dev_t of a partition by its UUID |
| * @uuid_str: char array containing ascii UUID |
| * @devt: dev_t result |
| * |
| * The function will return the first partition which contains a matching |
| * UUID value in its partition_meta_info struct. This does not search |
| * by filesystem UUIDs. |
| * |
| * If @uuid_str is followed by a "/PARTNROFF=%d", then the number will be |
| * extracted and used as an offset from the partition identified by the UUID. |
| * |
| * Returns 0 on success or a negative error code on failure. |
| */ |
| static int __init devt_from_partuuid(const char *uuid_str, dev_t *devt) |
| { |
| struct uuidcmp cmp; |
| struct device *dev = NULL; |
| int offset = 0; |
| char *slash; |
| |
| cmp.uuid = uuid_str; |
| |
| slash = strchr(uuid_str, '/'); |
| /* Check for optional partition number offset attributes. */ |
| if (slash) { |
| char c = 0; |
| |
| /* Explicitly fail on poor PARTUUID syntax. */ |
| if (sscanf(slash + 1, "PARTNROFF=%d%c", &offset, &c) != 1) |
| goto out_invalid; |
| cmp.len = slash - uuid_str; |
| } else { |
| cmp.len = strlen(uuid_str); |
| } |
| |
| if (!cmp.len) |
| goto out_invalid; |
| |
| dev = class_find_device(&block_class, NULL, &cmp, &match_dev_by_uuid); |
| if (!dev) |
| return -ENODEV; |
| |
| if (offset) { |
| /* |
| * Attempt to find the requested partition by adding an offset |
| * to the partition number found by UUID. |
| */ |
| *devt = part_devt(dev_to_disk(dev), |
| dev_to_bdev(dev)->bd_partno + offset); |
| } else { |
| *devt = dev->devt; |
| } |
| |
| put_device(dev); |
| return 0; |
| |
| out_invalid: |
| pr_err("VFS: PARTUUID= is invalid.\n" |
| "Expected PARTUUID=<valid-uuid-id>[/PARTNROFF=%%d]\n"); |
| return -EINVAL; |
| } |
| |
| /** |
| * match_dev_by_label - callback for finding a partition using its label |
| * @dev: device passed in by the caller |
| * @data: opaque pointer to the label to match |
| * |
| * Returns 1 if the device matches, and 0 otherwise. |
| */ |
| static int __init match_dev_by_label(struct device *dev, const void *data) |
| { |
| struct block_device *bdev = dev_to_bdev(dev); |
| const char *label = data; |
| |
| if (!bdev->bd_meta_info || strcmp(label, bdev->bd_meta_info->volname)) |
| return 0; |
| return 1; |
| } |
| |
| static int __init devt_from_partlabel(const char *label, dev_t *devt) |
| { |
| struct device *dev; |
| |
| dev = class_find_device(&block_class, NULL, label, &match_dev_by_label); |
| if (!dev) |
| return -ENODEV; |
| *devt = dev->devt; |
| put_device(dev); |
| return 0; |
| } |
| |
| static dev_t __init blk_lookup_devt(const char *name, int partno) |
| { |
| dev_t devt = MKDEV(0, 0); |
| struct class_dev_iter iter; |
| struct device *dev; |
| |
| class_dev_iter_init(&iter, &block_class, NULL, &disk_type); |
| while ((dev = class_dev_iter_next(&iter))) { |
| struct gendisk *disk = dev_to_disk(dev); |
| |
| if (strcmp(dev_name(dev), name)) |
| continue; |
| |
| if (partno < disk->minors) { |
| /* We need to return the right devno, even |
| * if the partition doesn't exist yet. |
| */ |
| devt = MKDEV(MAJOR(dev->devt), |
| MINOR(dev->devt) + partno); |
| } else { |
| devt = part_devt(disk, partno); |
| if (devt) |
| break; |
| } |
| } |
| class_dev_iter_exit(&iter); |
| return devt; |
| } |
| |
| static int __init devt_from_devname(const char *name, dev_t *devt) |
| { |
| int part; |
| char s[32]; |
| char *p; |
| |
| if (strlen(name) > 31) |
| return -EINVAL; |
| strcpy(s, name); |
| for (p = s; *p; p++) { |
| if (*p == '/') |
| *p = '!'; |
| } |
| |
| *devt = blk_lookup_devt(s, 0); |
| if (*devt) |
| return 0; |
| |
| /* |
| * Try non-existent, but valid partition, which may only exist after |
| * opening the device, like partitioned md devices. |
| */ |
| while (p > s && isdigit(p[-1])) |
| p--; |
| if (p == s || !*p || *p == '0') |
| return -ENODEV; |
| |
| /* try disk name without <part number> */ |
| part = simple_strtoul(p, NULL, 10); |
| *p = '\0'; |
| *devt = blk_lookup_devt(s, part); |
| if (*devt) |
| return 0; |
| |
| /* try disk name without p<part number> */ |
| if (p < s + 2 || !isdigit(p[-2]) || p[-1] != 'p') |
| return -ENODEV; |
| p[-1] = '\0'; |
| *devt = blk_lookup_devt(s, part); |
| if (*devt) |
| return 0; |
| return -ENODEV; |
| } |
| |
| static int __init devt_from_devnum(const char *name, dev_t *devt) |
| { |
| unsigned maj, min, offset; |
| char *p, dummy; |
| |
| if (sscanf(name, "%u:%u%c", &maj, &min, &dummy) == 2 || |
| sscanf(name, "%u:%u:%u:%c", &maj, &min, &offset, &dummy) == 3) { |
| *devt = MKDEV(maj, min); |
| if (maj != MAJOR(*devt) || min != MINOR(*devt)) |
| return -EINVAL; |
| } else { |
| *devt = new_decode_dev(simple_strtoul(name, &p, 16)); |
| if (*p) |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Convert a name into device number. We accept the following variants: |
| * |
| * 1) <hex_major><hex_minor> device number in hexadecimal represents itself |
| * no leading 0x, for example b302. |
| * 3) /dev/<disk_name> represents the device number of disk |
| * 4) /dev/<disk_name><decimal> represents the device number |
| * of partition - device number of disk plus the partition number |
| * 5) /dev/<disk_name>p<decimal> - same as the above, that form is |
| * used when disk name of partitioned disk ends on a digit. |
| * 6) PARTUUID=00112233-4455-6677-8899-AABBCCDDEEFF representing the |
| * unique id of a partition if the partition table provides it. |
| * The UUID may be either an EFI/GPT UUID, or refer to an MSDOS |
| * partition using the format SSSSSSSS-PP, where SSSSSSSS is a zero- |
| * filled hex representation of the 32-bit "NT disk signature", and PP |
| * is a zero-filled hex representation of the 1-based partition number. |
| * 7) PARTUUID=<UUID>/PARTNROFF=<int> to select a partition in relation to |
| * a partition with a known unique id. |
| * 8) <major>:<minor> major and minor number of the device separated by |
| * a colon. |
| * 9) PARTLABEL=<name> with name being the GPT partition label. |
| * MSDOS partitions do not support labels! |
| * |
| * If name doesn't have fall into the categories above, we return (0,0). |
| * block_class is used to check if something is a disk name. If the disk |
| * name contains slashes, the device name has them replaced with |
| * bangs. |
| */ |
| int __init early_lookup_bdev(const char *name, dev_t *devt) |
| { |
| if (strncmp(name, "PARTUUID=", 9) == 0) |
| return devt_from_partuuid(name + 9, devt); |
| if (strncmp(name, "PARTLABEL=", 10) == 0) |
| return devt_from_partlabel(name + 10, devt); |
| if (strncmp(name, "/dev/", 5) == 0) |
| return devt_from_devname(name + 5, devt); |
| return devt_from_devnum(name, devt); |
| } |
| |
| static char __init *bdevt_str(dev_t devt, char *buf) |
| { |
| if (MAJOR(devt) <= 0xff && MINOR(devt) <= 0xff) { |
| char tbuf[BDEVT_SIZE]; |
| snprintf(tbuf, BDEVT_SIZE, "%02x%02x", MAJOR(devt), MINOR(devt)); |
| snprintf(buf, BDEVT_SIZE, "%-9s", tbuf); |
| } else |
| snprintf(buf, BDEVT_SIZE, "%03x:%05x", MAJOR(devt), MINOR(devt)); |
| |
| return buf; |
| } |
| |
| /* |
| * print a full list of all partitions - intended for places where the root |
| * filesystem can't be mounted and thus to give the victim some idea of what |
| * went wrong |
| */ |
| void __init printk_all_partitions(void) |
| { |
| struct class_dev_iter iter; |
| struct device *dev; |
| |
| class_dev_iter_init(&iter, &block_class, NULL, &disk_type); |
| while ((dev = class_dev_iter_next(&iter))) { |
| struct gendisk *disk = dev_to_disk(dev); |
| struct block_device *part; |
| char devt_buf[BDEVT_SIZE]; |
| unsigned long idx; |
| |
| /* |
| * Don't show empty devices or things that have been |
| * suppressed |
| */ |
| if (get_capacity(disk) == 0 || (disk->flags & GENHD_FL_HIDDEN)) |
| continue; |
| |
| /* |
| * Note, unlike /proc/partitions, I am showing the numbers in |
| * hex - the same format as the root= option takes. |
| */ |
| rcu_read_lock(); |
| xa_for_each(&disk->part_tbl, idx, part) { |
| if (!bdev_nr_sectors(part)) |
| continue; |
| printk("%s%s %10llu %pg %s", |
| bdev_is_partition(part) ? " " : "", |
| bdevt_str(part->bd_dev, devt_buf), |
| bdev_nr_sectors(part) >> 1, part, |
| part->bd_meta_info ? |
| part->bd_meta_info->uuid : ""); |
| if (bdev_is_partition(part)) |
| printk("\n"); |
| else if (dev->parent && dev->parent->driver) |
| printk(" driver: %s\n", |
| dev->parent->driver->name); |
| else |
| printk(" (driver?)\n"); |
| } |
| rcu_read_unlock(); |
| } |
| class_dev_iter_exit(&iter); |
| } |