| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * adux1020.c - Support for Analog Devices ADUX1020 photometric sensor |
| * |
| * Copyright (C) 2019 Linaro Ltd. |
| * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> |
| * |
| * TODO: Triggered buffer support |
| */ |
| |
| #include <linux/bitfield.h> |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| #include <linux/i2c.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| #include <linux/module.h> |
| #include <linux/mutex.h> |
| #include <linux/regmap.h> |
| |
| #include <linux/iio/iio.h> |
| #include <linux/iio/sysfs.h> |
| #include <linux/iio/events.h> |
| |
| #define ADUX1020_REGMAP_NAME "adux1020_regmap" |
| #define ADUX1020_DRV_NAME "adux1020" |
| |
| /* System registers */ |
| #define ADUX1020_REG_CHIP_ID 0x08 |
| #define ADUX1020_REG_SLAVE_ADDRESS 0x09 |
| |
| #define ADUX1020_REG_SW_RESET 0x0f |
| #define ADUX1020_REG_INT_ENABLE 0x1c |
| #define ADUX1020_REG_INT_POLARITY 0x1d |
| #define ADUX1020_REG_PROX_TH_ON1 0x2a |
| #define ADUX1020_REG_PROX_TH_OFF1 0x2b |
| #define ADUX1020_REG_PROX_TYPE 0x2f |
| #define ADUX1020_REG_TEST_MODES_3 0x32 |
| #define ADUX1020_REG_FORCE_MODE 0x33 |
| #define ADUX1020_REG_FREQUENCY 0x40 |
| #define ADUX1020_REG_LED_CURRENT 0x41 |
| #define ADUX1020_REG_OP_MODE 0x45 |
| #define ADUX1020_REG_INT_MASK 0x48 |
| #define ADUX1020_REG_INT_STATUS 0x49 |
| #define ADUX1020_REG_DATA_BUFFER 0x60 |
| |
| /* Chip ID bits */ |
| #define ADUX1020_CHIP_ID_MASK GENMASK(11, 0) |
| #define ADUX1020_CHIP_ID 0x03fc |
| |
| #define ADUX1020_SW_RESET BIT(1) |
| #define ADUX1020_FIFO_FLUSH BIT(15) |
| #define ADUX1020_OP_MODE_MASK GENMASK(3, 0) |
| #define ADUX1020_DATA_OUT_MODE_MASK GENMASK(7, 4) |
| #define ADUX1020_DATA_OUT_PROX_I FIELD_PREP(ADUX1020_DATA_OUT_MODE_MASK, 1) |
| |
| #define ADUX1020_MODE_INT_MASK GENMASK(7, 0) |
| #define ADUX1020_INT_ENABLE 0x2094 |
| #define ADUX1020_INT_DISABLE 0x2090 |
| #define ADUX1020_PROX_INT_ENABLE 0x00f0 |
| #define ADUX1020_PROX_ON1_INT BIT(0) |
| #define ADUX1020_PROX_OFF1_INT BIT(1) |
| #define ADUX1020_FIFO_INT_ENABLE 0x7f |
| #define ADUX1020_MODE_INT_DISABLE 0xff |
| #define ADUX1020_MODE_INT_STATUS_MASK GENMASK(7, 0) |
| #define ADUX1020_FIFO_STATUS_MASK GENMASK(15, 8) |
| #define ADUX1020_INT_CLEAR 0xff |
| #define ADUX1020_PROX_TYPE BIT(15) |
| |
| #define ADUX1020_INT_PROX_ON1 BIT(0) |
| #define ADUX1020_INT_PROX_OFF1 BIT(1) |
| |
| #define ADUX1020_FORCE_CLOCK_ON 0x0f4f |
| #define ADUX1020_FORCE_CLOCK_RESET 0x0040 |
| #define ADUX1020_ACTIVE_4_STATE 0x0008 |
| |
| #define ADUX1020_PROX_FREQ_MASK GENMASK(7, 4) |
| #define ADUX1020_PROX_FREQ(x) FIELD_PREP(ADUX1020_PROX_FREQ_MASK, x) |
| |
| #define ADUX1020_LED_CURRENT_MASK GENMASK(3, 0) |
| #define ADUX1020_LED_PIREF_EN BIT(12) |
| |
| /* Operating modes */ |
| enum adux1020_op_modes { |
| ADUX1020_MODE_STANDBY, |
| ADUX1020_MODE_PROX_I, |
| ADUX1020_MODE_PROX_XY, |
| ADUX1020_MODE_GEST, |
| ADUX1020_MODE_SAMPLE, |
| ADUX1020_MODE_FORCE = 0x0e, |
| ADUX1020_MODE_IDLE = 0x0f, |
| }; |
| |
| struct adux1020_data { |
| struct i2c_client *client; |
| struct iio_dev *indio_dev; |
| struct mutex lock; |
| struct regmap *regmap; |
| }; |
| |
| struct adux1020_mode_data { |
| u8 bytes; |
| u8 buf_len; |
| u16 int_en; |
| }; |
| |
| static const struct adux1020_mode_data adux1020_modes[] = { |
| [ADUX1020_MODE_PROX_I] = { |
| .bytes = 2, |
| .buf_len = 1, |
| .int_en = ADUX1020_PROX_INT_ENABLE, |
| }, |
| }; |
| |
| static const struct regmap_config adux1020_regmap_config = { |
| .name = ADUX1020_REGMAP_NAME, |
| .reg_bits = 8, |
| .val_bits = 16, |
| .max_register = 0x6F, |
| .cache_type = REGCACHE_NONE, |
| }; |
| |
| static const struct reg_sequence adux1020_def_conf[] = { |
| { 0x000c, 0x000f }, |
| { 0x0010, 0x1010 }, |
| { 0x0011, 0x004c }, |
| { 0x0012, 0x5f0c }, |
| { 0x0013, 0xada5 }, |
| { 0x0014, 0x0080 }, |
| { 0x0015, 0x0000 }, |
| { 0x0016, 0x0600 }, |
| { 0x0017, 0x0000 }, |
| { 0x0018, 0x2693 }, |
| { 0x0019, 0x0004 }, |
| { 0x001a, 0x4280 }, |
| { 0x001b, 0x0060 }, |
| { 0x001c, 0x2094 }, |
| { 0x001d, 0x0020 }, |
| { 0x001e, 0x0001 }, |
| { 0x001f, 0x0100 }, |
| { 0x0020, 0x0320 }, |
| { 0x0021, 0x0A13 }, |
| { 0x0022, 0x0320 }, |
| { 0x0023, 0x0113 }, |
| { 0x0024, 0x0000 }, |
| { 0x0025, 0x2412 }, |
| { 0x0026, 0x2412 }, |
| { 0x0027, 0x0022 }, |
| { 0x0028, 0x0000 }, |
| { 0x0029, 0x0300 }, |
| { 0x002a, 0x0700 }, |
| { 0x002b, 0x0600 }, |
| { 0x002c, 0x6000 }, |
| { 0x002d, 0x4000 }, |
| { 0x002e, 0x0000 }, |
| { 0x002f, 0x0000 }, |
| { 0x0030, 0x0000 }, |
| { 0x0031, 0x0000 }, |
| { 0x0032, 0x0040 }, |
| { 0x0033, 0x0008 }, |
| { 0x0034, 0xE400 }, |
| { 0x0038, 0x8080 }, |
| { 0x0039, 0x8080 }, |
| { 0x003a, 0x2000 }, |
| { 0x003b, 0x1f00 }, |
| { 0x003c, 0x2000 }, |
| { 0x003d, 0x2000 }, |
| { 0x003e, 0x0000 }, |
| { 0x0040, 0x8069 }, |
| { 0x0041, 0x1f2f }, |
| { 0x0042, 0x4000 }, |
| { 0x0043, 0x0000 }, |
| { 0x0044, 0x0008 }, |
| { 0x0046, 0x0000 }, |
| { 0x0048, 0x00ef }, |
| { 0x0049, 0x0000 }, |
| { 0x0045, 0x0000 }, |
| }; |
| |
| static const int adux1020_rates[][2] = { |
| { 0, 100000 }, |
| { 0, 200000 }, |
| { 0, 500000 }, |
| { 1, 0 }, |
| { 2, 0 }, |
| { 5, 0 }, |
| { 10, 0 }, |
| { 20, 0 }, |
| { 50, 0 }, |
| { 100, 0 }, |
| { 190, 0 }, |
| { 450, 0 }, |
| { 820, 0 }, |
| { 1400, 0 }, |
| }; |
| |
| static const int adux1020_led_currents[][2] = { |
| { 0, 25000 }, |
| { 0, 40000 }, |
| { 0, 55000 }, |
| { 0, 70000 }, |
| { 0, 85000 }, |
| { 0, 100000 }, |
| { 0, 115000 }, |
| { 0, 130000 }, |
| { 0, 145000 }, |
| { 0, 160000 }, |
| { 0, 175000 }, |
| { 0, 190000 }, |
| { 0, 205000 }, |
| { 0, 220000 }, |
| { 0, 235000 }, |
| { 0, 250000 }, |
| }; |
| |
| static int adux1020_flush_fifo(struct adux1020_data *data) |
| { |
| int ret; |
| |
| /* Force Idle mode */ |
| ret = regmap_write(data->regmap, ADUX1020_REG_FORCE_MODE, |
| ADUX1020_ACTIVE_4_STATE); |
| if (ret < 0) |
| return ret; |
| |
| ret = regmap_update_bits(data->regmap, ADUX1020_REG_OP_MODE, |
| ADUX1020_OP_MODE_MASK, ADUX1020_MODE_FORCE); |
| if (ret < 0) |
| return ret; |
| |
| ret = regmap_update_bits(data->regmap, ADUX1020_REG_OP_MODE, |
| ADUX1020_OP_MODE_MASK, ADUX1020_MODE_IDLE); |
| if (ret < 0) |
| return ret; |
| |
| /* Flush FIFO */ |
| ret = regmap_write(data->regmap, ADUX1020_REG_TEST_MODES_3, |
| ADUX1020_FORCE_CLOCK_ON); |
| if (ret < 0) |
| return ret; |
| |
| ret = regmap_write(data->regmap, ADUX1020_REG_INT_STATUS, |
| ADUX1020_FIFO_FLUSH); |
| if (ret < 0) |
| return ret; |
| |
| return regmap_write(data->regmap, ADUX1020_REG_TEST_MODES_3, |
| ADUX1020_FORCE_CLOCK_RESET); |
| } |
| |
| static int adux1020_read_fifo(struct adux1020_data *data, u16 *buf, u8 buf_len) |
| { |
| unsigned int regval; |
| int i, ret; |
| |
| /* Enable 32MHz clock */ |
| ret = regmap_write(data->regmap, ADUX1020_REG_TEST_MODES_3, |
| ADUX1020_FORCE_CLOCK_ON); |
| if (ret < 0) |
| return ret; |
| |
| for (i = 0; i < buf_len; i++) { |
| ret = regmap_read(data->regmap, ADUX1020_REG_DATA_BUFFER, |
| ®val); |
| if (ret < 0) |
| return ret; |
| |
| buf[i] = regval; |
| } |
| |
| /* Set 32MHz clock to be controlled by internal state machine */ |
| return regmap_write(data->regmap, ADUX1020_REG_TEST_MODES_3, |
| ADUX1020_FORCE_CLOCK_RESET); |
| } |
| |
| static int adux1020_set_mode(struct adux1020_data *data, |
| enum adux1020_op_modes mode) |
| { |
| int ret; |
| |
| /* Switch to standby mode before changing the mode */ |
| ret = regmap_write(data->regmap, ADUX1020_REG_OP_MODE, |
| ADUX1020_MODE_STANDBY); |
| if (ret < 0) |
| return ret; |
| |
| /* Set data out and switch to the desired mode */ |
| switch (mode) { |
| case ADUX1020_MODE_PROX_I: |
| ret = regmap_update_bits(data->regmap, ADUX1020_REG_OP_MODE, |
| ADUX1020_DATA_OUT_MODE_MASK, |
| ADUX1020_DATA_OUT_PROX_I); |
| if (ret < 0) |
| return ret; |
| |
| ret = regmap_update_bits(data->regmap, ADUX1020_REG_OP_MODE, |
| ADUX1020_OP_MODE_MASK, |
| ADUX1020_MODE_PROX_I); |
| if (ret < 0) |
| return ret; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int adux1020_measure(struct adux1020_data *data, |
| enum adux1020_op_modes mode, |
| u16 *val) |
| { |
| unsigned int status; |
| int ret, tries = 50; |
| |
| /* Disable INT pin as polling is going to be used */ |
| ret = regmap_write(data->regmap, ADUX1020_REG_INT_ENABLE, |
| ADUX1020_INT_DISABLE); |
| if (ret < 0) |
| return ret; |
| |
| /* Enable mode interrupt */ |
| ret = regmap_update_bits(data->regmap, ADUX1020_REG_INT_MASK, |
| ADUX1020_MODE_INT_MASK, |
| adux1020_modes[mode].int_en); |
| if (ret < 0) |
| return ret; |
| |
| while (tries--) { |
| ret = regmap_read(data->regmap, ADUX1020_REG_INT_STATUS, |
| &status); |
| if (ret < 0) |
| return ret; |
| |
| status &= ADUX1020_FIFO_STATUS_MASK; |
| if (status >= adux1020_modes[mode].bytes) |
| break; |
| msleep(20); |
| } |
| |
| if (tries < 0) |
| return -EIO; |
| |
| ret = adux1020_read_fifo(data, val, adux1020_modes[mode].buf_len); |
| if (ret < 0) |
| return ret; |
| |
| /* Clear mode interrupt */ |
| ret = regmap_write(data->regmap, ADUX1020_REG_INT_STATUS, |
| (~adux1020_modes[mode].int_en)); |
| if (ret < 0) |
| return ret; |
| |
| /* Disable mode interrupts */ |
| return regmap_update_bits(data->regmap, ADUX1020_REG_INT_MASK, |
| ADUX1020_MODE_INT_MASK, |
| ADUX1020_MODE_INT_DISABLE); |
| } |
| |
| static int adux1020_read_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| int *val, int *val2, long mask) |
| { |
| struct adux1020_data *data = iio_priv(indio_dev); |
| u16 buf[3]; |
| int ret = -EINVAL; |
| unsigned int regval; |
| |
| mutex_lock(&data->lock); |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_RAW: |
| switch (chan->type) { |
| case IIO_PROXIMITY: |
| ret = adux1020_set_mode(data, ADUX1020_MODE_PROX_I); |
| if (ret < 0) |
| goto fail; |
| |
| ret = adux1020_measure(data, ADUX1020_MODE_PROX_I, buf); |
| if (ret < 0) |
| goto fail; |
| |
| *val = buf[0]; |
| ret = IIO_VAL_INT; |
| break; |
| default: |
| break; |
| } |
| break; |
| case IIO_CHAN_INFO_PROCESSED: |
| switch (chan->type) { |
| case IIO_CURRENT: |
| ret = regmap_read(data->regmap, |
| ADUX1020_REG_LED_CURRENT, ®val); |
| if (ret < 0) |
| goto fail; |
| |
| regval = regval & ADUX1020_LED_CURRENT_MASK; |
| |
| *val = adux1020_led_currents[regval][0]; |
| *val2 = adux1020_led_currents[regval][1]; |
| |
| ret = IIO_VAL_INT_PLUS_MICRO; |
| break; |
| default: |
| break; |
| } |
| break; |
| case IIO_CHAN_INFO_SAMP_FREQ: |
| switch (chan->type) { |
| case IIO_PROXIMITY: |
| ret = regmap_read(data->regmap, ADUX1020_REG_FREQUENCY, |
| ®val); |
| if (ret < 0) |
| goto fail; |
| |
| regval = FIELD_GET(ADUX1020_PROX_FREQ_MASK, regval); |
| |
| *val = adux1020_rates[regval][0]; |
| *val2 = adux1020_rates[regval][1]; |
| |
| ret = IIO_VAL_INT_PLUS_MICRO; |
| break; |
| default: |
| break; |
| } |
| break; |
| default: |
| break; |
| } |
| |
| fail: |
| mutex_unlock(&data->lock); |
| |
| return ret; |
| }; |
| |
| static inline int adux1020_find_index(const int array[][2], int count, int val, |
| int val2) |
| { |
| int i; |
| |
| for (i = 0; i < count; i++) |
| if (val == array[i][0] && val2 == array[i][1]) |
| return i; |
| |
| return -EINVAL; |
| } |
| |
| static int adux1020_write_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| int val, int val2, long mask) |
| { |
| struct adux1020_data *data = iio_priv(indio_dev); |
| int i, ret = -EINVAL; |
| |
| mutex_lock(&data->lock); |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_SAMP_FREQ: |
| if (chan->type == IIO_PROXIMITY) { |
| i = adux1020_find_index(adux1020_rates, |
| ARRAY_SIZE(adux1020_rates), |
| val, val2); |
| if (i < 0) { |
| ret = i; |
| goto fail; |
| } |
| |
| ret = regmap_update_bits(data->regmap, |
| ADUX1020_REG_FREQUENCY, |
| ADUX1020_PROX_FREQ_MASK, |
| ADUX1020_PROX_FREQ(i)); |
| } |
| break; |
| case IIO_CHAN_INFO_PROCESSED: |
| if (chan->type == IIO_CURRENT) { |
| i = adux1020_find_index(adux1020_led_currents, |
| ARRAY_SIZE(adux1020_led_currents), |
| val, val2); |
| if (i < 0) { |
| ret = i; |
| goto fail; |
| } |
| |
| ret = regmap_update_bits(data->regmap, |
| ADUX1020_REG_LED_CURRENT, |
| ADUX1020_LED_CURRENT_MASK, i); |
| } |
| break; |
| default: |
| break; |
| } |
| |
| fail: |
| mutex_unlock(&data->lock); |
| |
| return ret; |
| } |
| |
| static int adux1020_write_event_config(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, |
| enum iio_event_type type, |
| enum iio_event_direction dir, int state) |
| { |
| struct adux1020_data *data = iio_priv(indio_dev); |
| int ret, mask; |
| |
| mutex_lock(&data->lock); |
| |
| ret = regmap_write(data->regmap, ADUX1020_REG_INT_ENABLE, |
| ADUX1020_INT_ENABLE); |
| if (ret < 0) |
| goto fail; |
| |
| ret = regmap_write(data->regmap, ADUX1020_REG_INT_POLARITY, 0); |
| if (ret < 0) |
| goto fail; |
| |
| switch (chan->type) { |
| case IIO_PROXIMITY: |
| if (dir == IIO_EV_DIR_RISING) |
| mask = ADUX1020_PROX_ON1_INT; |
| else |
| mask = ADUX1020_PROX_OFF1_INT; |
| |
| if (state) |
| state = 0; |
| else |
| state = mask; |
| |
| ret = regmap_update_bits(data->regmap, ADUX1020_REG_INT_MASK, |
| mask, state); |
| if (ret < 0) |
| goto fail; |
| |
| /* |
| * Trigger proximity interrupt when the intensity is above |
| * or below threshold |
| */ |
| ret = regmap_update_bits(data->regmap, ADUX1020_REG_PROX_TYPE, |
| ADUX1020_PROX_TYPE, |
| ADUX1020_PROX_TYPE); |
| if (ret < 0) |
| goto fail; |
| |
| /* Set proximity mode */ |
| ret = adux1020_set_mode(data, ADUX1020_MODE_PROX_I); |
| break; |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| |
| fail: |
| mutex_unlock(&data->lock); |
| |
| return ret; |
| } |
| |
| static int adux1020_read_event_config(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, |
| enum iio_event_type type, |
| enum iio_event_direction dir) |
| { |
| struct adux1020_data *data = iio_priv(indio_dev); |
| int ret, mask; |
| unsigned int regval; |
| |
| switch (chan->type) { |
| case IIO_PROXIMITY: |
| if (dir == IIO_EV_DIR_RISING) |
| mask = ADUX1020_PROX_ON1_INT; |
| else |
| mask = ADUX1020_PROX_OFF1_INT; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| ret = regmap_read(data->regmap, ADUX1020_REG_INT_MASK, ®val); |
| if (ret < 0) |
| return ret; |
| |
| return !(regval & mask); |
| } |
| |
| static int adux1020_read_thresh(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, |
| enum iio_event_type type, |
| enum iio_event_direction dir, |
| enum iio_event_info info, int *val, int *val2) |
| { |
| struct adux1020_data *data = iio_priv(indio_dev); |
| u8 reg; |
| int ret; |
| unsigned int regval; |
| |
| switch (chan->type) { |
| case IIO_PROXIMITY: |
| if (dir == IIO_EV_DIR_RISING) |
| reg = ADUX1020_REG_PROX_TH_ON1; |
| else |
| reg = ADUX1020_REG_PROX_TH_OFF1; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| ret = regmap_read(data->regmap, reg, ®val); |
| if (ret < 0) |
| return ret; |
| |
| *val = regval; |
| |
| return IIO_VAL_INT; |
| } |
| |
| static int adux1020_write_thresh(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, |
| enum iio_event_type type, |
| enum iio_event_direction dir, |
| enum iio_event_info info, int val, int val2) |
| { |
| struct adux1020_data *data = iio_priv(indio_dev); |
| u8 reg; |
| |
| switch (chan->type) { |
| case IIO_PROXIMITY: |
| if (dir == IIO_EV_DIR_RISING) |
| reg = ADUX1020_REG_PROX_TH_ON1; |
| else |
| reg = ADUX1020_REG_PROX_TH_OFF1; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| /* Full scale threshold value is 0-65535 */ |
| if (val < 0 || val > 65535) |
| return -EINVAL; |
| |
| return regmap_write(data->regmap, reg, val); |
| } |
| |
| static const struct iio_event_spec adux1020_proximity_event[] = { |
| { |
| .type = IIO_EV_TYPE_THRESH, |
| .dir = IIO_EV_DIR_RISING, |
| .mask_separate = BIT(IIO_EV_INFO_VALUE) | |
| BIT(IIO_EV_INFO_ENABLE), |
| }, |
| { |
| .type = IIO_EV_TYPE_THRESH, |
| .dir = IIO_EV_DIR_FALLING, |
| .mask_separate = BIT(IIO_EV_INFO_VALUE) | |
| BIT(IIO_EV_INFO_ENABLE), |
| }, |
| }; |
| |
| static const struct iio_chan_spec adux1020_channels[] = { |
| { |
| .type = IIO_PROXIMITY, |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | |
| BIT(IIO_CHAN_INFO_SAMP_FREQ), |
| .event_spec = adux1020_proximity_event, |
| .num_event_specs = ARRAY_SIZE(adux1020_proximity_event), |
| }, |
| { |
| .type = IIO_CURRENT, |
| .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), |
| .extend_name = "led", |
| .output = 1, |
| }, |
| }; |
| |
| static IIO_CONST_ATTR_SAMP_FREQ_AVAIL( |
| "0.1 0.2 0.5 1 2 5 10 20 50 100 190 450 820 1400"); |
| |
| static struct attribute *adux1020_attributes[] = { |
| &iio_const_attr_sampling_frequency_available.dev_attr.attr, |
| NULL |
| }; |
| |
| static const struct attribute_group adux1020_attribute_group = { |
| .attrs = adux1020_attributes, |
| }; |
| |
| static const struct iio_info adux1020_info = { |
| .attrs = &adux1020_attribute_group, |
| .read_raw = adux1020_read_raw, |
| .write_raw = adux1020_write_raw, |
| .read_event_config = adux1020_read_event_config, |
| .write_event_config = adux1020_write_event_config, |
| .read_event_value = adux1020_read_thresh, |
| .write_event_value = adux1020_write_thresh, |
| }; |
| |
| static irqreturn_t adux1020_interrupt_handler(int irq, void *private) |
| { |
| struct iio_dev *indio_dev = private; |
| struct adux1020_data *data = iio_priv(indio_dev); |
| int ret, status; |
| |
| ret = regmap_read(data->regmap, ADUX1020_REG_INT_STATUS, &status); |
| if (ret < 0) |
| return IRQ_HANDLED; |
| |
| status &= ADUX1020_MODE_INT_STATUS_MASK; |
| |
| if (status & ADUX1020_INT_PROX_ON1) { |
| iio_push_event(indio_dev, |
| IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY, 0, |
| IIO_EV_TYPE_THRESH, |
| IIO_EV_DIR_RISING), |
| iio_get_time_ns(indio_dev)); |
| } |
| |
| if (status & ADUX1020_INT_PROX_OFF1) { |
| iio_push_event(indio_dev, |
| IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY, 0, |
| IIO_EV_TYPE_THRESH, |
| IIO_EV_DIR_FALLING), |
| iio_get_time_ns(indio_dev)); |
| } |
| |
| regmap_update_bits(data->regmap, ADUX1020_REG_INT_STATUS, |
| ADUX1020_MODE_INT_MASK, ADUX1020_INT_CLEAR); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int adux1020_chip_init(struct adux1020_data *data) |
| { |
| struct i2c_client *client = data->client; |
| int ret; |
| unsigned int val; |
| |
| ret = regmap_read(data->regmap, ADUX1020_REG_CHIP_ID, &val); |
| if (ret < 0) |
| return ret; |
| |
| if ((val & ADUX1020_CHIP_ID_MASK) != ADUX1020_CHIP_ID) { |
| dev_err(&client->dev, "invalid chip id 0x%04x\n", val); |
| return -ENODEV; |
| } |
| |
| dev_dbg(&client->dev, "Detected ADUX1020 with chip id: 0x%04x\n", val); |
| |
| ret = regmap_update_bits(data->regmap, ADUX1020_REG_SW_RESET, |
| ADUX1020_SW_RESET, ADUX1020_SW_RESET); |
| if (ret < 0) |
| return ret; |
| |
| /* Load default configuration */ |
| ret = regmap_multi_reg_write(data->regmap, adux1020_def_conf, |
| ARRAY_SIZE(adux1020_def_conf)); |
| if (ret < 0) |
| return ret; |
| |
| ret = adux1020_flush_fifo(data); |
| if (ret < 0) |
| return ret; |
| |
| /* Use LED_IREF for proximity mode */ |
| ret = regmap_update_bits(data->regmap, ADUX1020_REG_LED_CURRENT, |
| ADUX1020_LED_PIREF_EN, 0); |
| if (ret < 0) |
| return ret; |
| |
| /* Mask all interrupts */ |
| return regmap_update_bits(data->regmap, ADUX1020_REG_INT_MASK, |
| ADUX1020_MODE_INT_MASK, ADUX1020_MODE_INT_DISABLE); |
| } |
| |
| static int adux1020_probe(struct i2c_client *client) |
| { |
| struct adux1020_data *data; |
| struct iio_dev *indio_dev; |
| int ret; |
| |
| indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); |
| if (!indio_dev) |
| return -ENOMEM; |
| |
| indio_dev->info = &adux1020_info; |
| indio_dev->name = ADUX1020_DRV_NAME; |
| indio_dev->channels = adux1020_channels; |
| indio_dev->num_channels = ARRAY_SIZE(adux1020_channels); |
| indio_dev->modes = INDIO_DIRECT_MODE; |
| |
| data = iio_priv(indio_dev); |
| |
| data->regmap = devm_regmap_init_i2c(client, &adux1020_regmap_config); |
| if (IS_ERR(data->regmap)) { |
| dev_err(&client->dev, "regmap initialization failed.\n"); |
| return PTR_ERR(data->regmap); |
| } |
| |
| data->client = client; |
| data->indio_dev = indio_dev; |
| mutex_init(&data->lock); |
| |
| ret = adux1020_chip_init(data); |
| if (ret) |
| return ret; |
| |
| if (client->irq) { |
| ret = devm_request_threaded_irq(&client->dev, client->irq, |
| NULL, adux1020_interrupt_handler, |
| IRQF_TRIGGER_HIGH | IRQF_ONESHOT, |
| ADUX1020_DRV_NAME, indio_dev); |
| if (ret) { |
| dev_err(&client->dev, "irq request error %d\n", -ret); |
| return ret; |
| } |
| } |
| |
| return devm_iio_device_register(&client->dev, indio_dev); |
| } |
| |
| static const struct i2c_device_id adux1020_id[] = { |
| { "adux1020", 0 }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(i2c, adux1020_id); |
| |
| static const struct of_device_id adux1020_of_match[] = { |
| { .compatible = "adi,adux1020" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, adux1020_of_match); |
| |
| static struct i2c_driver adux1020_driver = { |
| .driver = { |
| .name = ADUX1020_DRV_NAME, |
| .of_match_table = adux1020_of_match, |
| }, |
| .probe = adux1020_probe, |
| .id_table = adux1020_id, |
| }; |
| module_i2c_driver(adux1020_driver); |
| |
| MODULE_AUTHOR("Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>"); |
| MODULE_DESCRIPTION("ADUX1020 photometric sensor"); |
| MODULE_LICENSE("GPL"); |