blob: 5664ac507c902e462073590593ecc8606086e41d [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0-only
*
* Copyright (C) 2020-21 Intel Corporation.
*/
#ifndef IOSM_IPC_IMEM_H
#define IOSM_IPC_IMEM_H
#include <linux/skbuff.h>
#include "iosm_ipc_mmio.h"
#include "iosm_ipc_pcie.h"
#include "iosm_ipc_uevent.h"
#include "iosm_ipc_wwan.h"
#include "iosm_ipc_task_queue.h"
struct ipc_chnl_cfg;
/* IRQ moderation in usec */
#define IRQ_MOD_OFF 0
#define IRQ_MOD_NET 1000
#define IRQ_MOD_TRC 4000
/* Either the PSI image is accepted by CP or the suspended flash tool is waken,
* informed that the CP ROM driver is not ready to process the PSI image.
* unit : milliseconds
*/
#define IPC_PSI_TRANSFER_TIMEOUT 3000
/* Timeout in 20 msec to wait for the modem to boot up to
* IPC_MEM_DEVICE_IPC_INIT state.
* unit : milliseconds (500 * ipc_util_msleep(20))
*/
#define IPC_MODEM_BOOT_TIMEOUT 500
/* Wait timeout for ipc status reflects IPC_MEM_DEVICE_IPC_UNINIT
* unit : milliseconds
*/
#define IPC_MODEM_UNINIT_TIMEOUT_MS 30
/* Pending time for processing data.
* unit : milliseconds
*/
#define IPC_PEND_DATA_TIMEOUT 500
/* The timeout in milliseconds for application to wait for remote time. */
#define IPC_REMOTE_TS_TIMEOUT_MS 10
/* Timeout for TD allocation retry.
* unit : milliseconds
*/
#define IPC_TD_ALLOC_TIMER_PERIOD_MS 100
/* Host sleep target is host */
#define IPC_HOST_SLEEP_HOST 0
/* Host sleep target is device */
#define IPC_HOST_SLEEP_DEVICE 1
/* Sleep message, target host: AP enters sleep / target device: CP is
* allowed to enter sleep and shall use the host sleep protocol
*/
#define IPC_HOST_SLEEP_ENTER_SLEEP 0
/* Sleep_message, target host: AP exits sleep / target device: CP is
* NOT allowed to enter sleep
*/
#define IPC_HOST_SLEEP_EXIT_SLEEP 1
#define IMEM_IRQ_DONT_CARE (-1)
#define IPC_MEM_MAX_CHANNELS 8
#define IPC_MEM_MUX_IP_SESSION_ENTRIES 8
#define IPC_MEM_MUX_IP_CH_IF_ID 0
#define TD_UPDATE_DEFAULT_TIMEOUT_USEC 1900
#define FORCE_UPDATE_DEFAULT_TIMEOUT_USEC 500
/* Sleep_message, target host: not applicable / target device: CP is
* allowed to enter sleep and shall NOT use the device sleep protocol
*/
#define IPC_HOST_SLEEP_ENTER_SLEEP_NO_PROTOCOL 2
/* in_band_crash_signal IPC_MEM_INBAND_CRASH_SIG
* Modem crash notification configuration. If this value is non-zero then
* FEATURE_SET message will be sent to the Modem as a result the Modem will
* signal Crash via Execution Stage register. If this value is zero then Modem
* will use out-of-band method to notify about it's Crash.
*/
#define IPC_MEM_INBAND_CRASH_SIG 1
/* Extra headroom to be allocated for DL SKBs to allow addition of Ethernet
* header
*/
#define IPC_MEM_DL_ETH_OFFSET 16
#define IPC_CB(skb) ((struct ipc_skb_cb *)((skb)->cb))
#define IOSM_CHIP_INFO_SIZE_MAX 100
#define FULLY_FUNCTIONAL 0
#define IOSM_DEVLINK_INIT 1
/* List of the supported UL/DL pipes. */
enum ipc_mem_pipes {
IPC_MEM_PIPE_0 = 0,
IPC_MEM_PIPE_1,
IPC_MEM_PIPE_2,
IPC_MEM_PIPE_3,
IPC_MEM_PIPE_4,
IPC_MEM_PIPE_5,
IPC_MEM_PIPE_6,
IPC_MEM_PIPE_7,
IPC_MEM_PIPE_8,
IPC_MEM_PIPE_9,
IPC_MEM_PIPE_10,
IPC_MEM_PIPE_11,
IPC_MEM_PIPE_12,
IPC_MEM_PIPE_13,
IPC_MEM_PIPE_14,
IPC_MEM_PIPE_15,
IPC_MEM_PIPE_16,
IPC_MEM_PIPE_17,
IPC_MEM_PIPE_18,
IPC_MEM_PIPE_19,
IPC_MEM_PIPE_20,
IPC_MEM_PIPE_21,
IPC_MEM_PIPE_22,
IPC_MEM_PIPE_23,
IPC_MEM_MAX_PIPES
};
/* Enum defining channel states. */
enum ipc_channel_state {
IMEM_CHANNEL_FREE,
IMEM_CHANNEL_RESERVED,
IMEM_CHANNEL_ACTIVE,
IMEM_CHANNEL_CLOSING,
};
/**
* enum ipc_ctype - Enum defining supported channel type needed for control
* /IP traffic.
* @IPC_CTYPE_WWAN: Used for IP traffic
* @IPC_CTYPE_CTRL: Used for Control Communication
*/
enum ipc_ctype {
IPC_CTYPE_WWAN,
IPC_CTYPE_CTRL,
};
/* Pipe direction. */
enum ipc_mem_pipe_dir {
IPC_MEM_DIR_UL,
IPC_MEM_DIR_DL,
};
/* HP update identifier. To be used as data for ipc_cp_irq_hpda_update() */
enum ipc_hp_identifier {
IPC_HP_MR = 0,
IPC_HP_PM_TRIGGER,
IPC_HP_WAKEUP_SPEC_TMR,
IPC_HP_TD_UPD_TMR_START,
IPC_HP_TD_UPD_TMR,
IPC_HP_FAST_TD_UPD_TMR,
IPC_HP_UL_WRITE_TD,
IPC_HP_DL_PROCESS,
IPC_HP_NET_CHANNEL_INIT,
IPC_HP_CDEV_OPEN,
};
/**
* struct ipc_pipe - Structure for Pipe.
* @tdr_start: Ipc private protocol Transfer Descriptor Ring
* @channel: Id of the sio device, set by imem_sio_open,
* needed to pass DL char to the user terminal
* @skbr_start: Circular buffer for skbuf and the buffer
* reference in a tdr_start entry.
* @phy_tdr_start: Transfer descriptor start address
* @old_head: last head pointer reported to CP.
* @old_tail: AP read position before CP moves the read
* position to write/head. If CP has consumed the
* buffers, AP has to freed the skbuf starting at
* tdr_start[old_tail].
* @nr_of_entries: Number of elements of skb_start and tdr_start.
* @max_nr_of_queued_entries: Maximum number of queued entries in TDR
* @accumulation_backoff: Accumulation in usec for accumulation
* backoff (0 = no acc backoff)
* @irq_moderation: timer in usec for irq_moderation
* (0=no irq moderation)
* @pipe_nr: Pipe identification number
* @irq: Interrupt vector
* @dir: Direction of data stream in pipe
* @buf_size: Buffer size (in bytes) for preallocated
* buffers (for DL pipes)
* @nr_of_queued_entries: Aueued number of entries
* @is_open: Check for open pipe status
*/
struct ipc_pipe {
struct ipc_protocol_td *tdr_start;
struct ipc_mem_channel *channel;
struct sk_buff **skbr_start;
dma_addr_t phy_tdr_start;
u32 old_head;
u32 old_tail;
u32 nr_of_entries;
u32 max_nr_of_queued_entries;
u32 accumulation_backoff;
u32 irq_moderation;
u32 pipe_nr;
u32 irq;
enum ipc_mem_pipe_dir dir;
u32 buf_size;
u16 nr_of_queued_entries;
u8 is_open:1;
};
/**
* struct ipc_mem_channel - Structure for Channel.
* @channel_id: Instance of the channel list and is return to the user
* at the end of the open operation.
* @ctype: Control or netif channel.
* @index: unique index per ctype
* @ul_pipe: pipe objects
* @dl_pipe: pipe objects
* @if_id: Interface ID
* @net_err_count: Number of downlink errors returned by ipc_wwan_receive
* interface at the entry point of the IP stack.
* @state: Free, reserved or busy (in use).
* @ul_sem: Needed for the blocking write or uplink transfer.
* @ul_list: Uplink accumulator which is filled by the uplink
* char app or IP stack. The socket buffer pointer are
* added to the descriptor list in the kthread context.
*/
struct ipc_mem_channel {
int channel_id;
enum ipc_ctype ctype;
int index;
struct ipc_pipe ul_pipe;
struct ipc_pipe dl_pipe;
int if_id;
u32 net_err_count;
enum ipc_channel_state state;
struct completion ul_sem;
struct sk_buff_head ul_list;
};
/**
* enum ipc_phase - Different AP and CP phases.
* The enums defined after "IPC_P_ROM" and before
* "IPC_P_RUN" indicates the operating state where CP can
* respond to any requests. So while introducing new phase
* this shall be taken into consideration.
* @IPC_P_OFF: On host PC, the PCIe device link settings are known
* about the combined power on. PC is running, the driver
* is loaded and CP is in power off mode. The PCIe bus
* driver call the device power mode D3hot. In this phase
* the driver the polls the device, until the device is in
* the power on state and signals the power mode D0.
* @IPC_P_OFF_REQ: The intermediate phase between cleanup activity starts
* and ends.
* @IPC_P_CRASH: The phase indicating CP crash
* @IPC_P_CD_READY: The phase indicating CP core dump is ready
* @IPC_P_ROM: After power on, CP starts in ROM mode and the IPC ROM
* driver is waiting 150 ms for the AP active notification
* saved in the PCI link status register.
* @IPC_P_PSI: Primary signed image download phase
* @IPC_P_EBL: Extended bootloader pahse
* @IPC_P_RUN: The phase after flashing to RAM is the RUNTIME phase.
*/
enum ipc_phase {
IPC_P_OFF,
IPC_P_OFF_REQ,
IPC_P_CRASH,
IPC_P_CD_READY,
IPC_P_ROM,
IPC_P_PSI,
IPC_P_EBL,
IPC_P_RUN,
};
/**
* struct iosm_imem - Current state of the IPC shared memory.
* @mmio: mmio instance to access CP MMIO area /
* doorbell scratchpad.
* @ipc_protocol: IPC Protocol instance
* @ipc_task: Task for entry into ipc task queue
* @wwan: WWAN device pointer
* @mux: IP Data multiplexing state.
* @sio: IPC SIO data structure pointer
* @ipc_port: IPC PORT data structure pointer
* @pcie: IPC PCIe
* @trace: IPC trace data structure pointer
* @dev: Pointer to device structure
* @ipc_requested_state: Expected IPC state on CP.
* @channels: Channel list with UL/DL pipe pairs.
* @ipc_devlink: IPC Devlink data structure pointer
* @ipc_status: local ipc_status
* @nr_of_channels: number of configured channels
* @startup_timer: startup timer for NAND support.
* @hrtimer_period: Hr timer period
* @tdupdate_timer: Delay the TD update doorbell.
* @fast_update_timer: forced head pointer update delay timer.
* @td_alloc_timer: Timer for DL pipe TD allocation retry
* @adb_timer: Timer for finishing the ADB.
* @rom_exit_code: Mapped boot rom exit code.
* @enter_runtime: 1 means the transition to runtime phase was
* executed.
* @ul_pend_sem: Semaphore to wait/complete of UL TDs
* before closing pipe.
* @app_notify_ul_pend: Signal app if UL TD is pending
* @dl_pend_sem: Semaphore to wait/complete of DL TDs
* before closing pipe.
* @app_notify_dl_pend: Signal app if DL TD is pending
* @phase: Operating phase like runtime.
* @pci_device_id: Device ID
* @cp_version: CP version
* @device_sleep: Device sleep state
* @run_state_worker: Pointer to worker component for device
* setup operations to be called when modem
* reaches RUN state
* @ev_irq_pending: 0 means inform the IPC tasklet to
* process the irq actions.
* @flag: Flag to monitor the state of driver
* @td_update_timer_suspended: if true then td update timer suspend
* @ev_mux_net_transmit_pending:0 means inform the IPC tasklet to pass
* @reset_det_n: Reset detect flag
* @pcie_wake_n: Pcie wake flag
* @debugfs_wwan_dir: WWAN Debug FS directory entry
* @debugfs_dir: Debug FS directory for driver-specific entries
*/
struct iosm_imem {
struct iosm_mmio *mmio;
struct iosm_protocol *ipc_protocol;
struct ipc_task *ipc_task;
struct iosm_wwan *wwan;
struct iosm_mux *mux;
struct iosm_cdev *ipc_port[IPC_MEM_MAX_CHANNELS];
struct iosm_pcie *pcie;
#ifdef CONFIG_WWAN_DEBUGFS
struct iosm_trace *trace;
#endif
struct device *dev;
enum ipc_mem_device_ipc_state ipc_requested_state;
struct ipc_mem_channel channels[IPC_MEM_MAX_CHANNELS];
struct iosm_devlink *ipc_devlink;
u32 ipc_status;
u32 nr_of_channels;
struct hrtimer startup_timer;
ktime_t hrtimer_period;
struct hrtimer tdupdate_timer;
struct hrtimer fast_update_timer;
struct hrtimer td_alloc_timer;
struct hrtimer adb_timer;
enum rom_exit_code rom_exit_code;
u32 enter_runtime;
struct completion ul_pend_sem;
u32 app_notify_ul_pend;
struct completion dl_pend_sem;
u32 app_notify_dl_pend;
enum ipc_phase phase;
u16 pci_device_id;
int cp_version;
int device_sleep;
struct work_struct run_state_worker;
u8 ev_irq_pending[IPC_IRQ_VECTORS];
unsigned long flag;
u8 td_update_timer_suspended:1,
ev_mux_net_transmit_pending:1,
reset_det_n:1,
pcie_wake_n:1;
#ifdef CONFIG_WWAN_DEBUGFS
struct dentry *debugfs_wwan_dir;
struct dentry *debugfs_dir;
#endif
};
/**
* ipc_imem_init - Initialize the shared memory region
* @pcie: Pointer to core driver data-struct
* @device_id: PCI device ID
* @mmio: Pointer to the mmio area
* @dev: Pointer to device structure
*
* Returns: Initialized imem pointer on success else NULL
*/
struct iosm_imem *ipc_imem_init(struct iosm_pcie *pcie, unsigned int device_id,
void __iomem *mmio, struct device *dev);
/**
* ipc_imem_pm_s2idle_sleep - Set PM variables to sleep/active for
* s2idle sleep/active
* @ipc_imem: Pointer to imem data-struct
* @sleep: Set PM Variable to sleep/active
*/
void ipc_imem_pm_s2idle_sleep(struct iosm_imem *ipc_imem, bool sleep);
/**
* ipc_imem_pm_suspend - The HAL shall ask the shared memory layer
* whether D3 is allowed.
* @ipc_imem: Pointer to imem data-struct
*/
void ipc_imem_pm_suspend(struct iosm_imem *ipc_imem);
/**
* ipc_imem_pm_resume - The HAL shall inform the shared memory layer
* that the device is active.
* @ipc_imem: Pointer to imem data-struct
*/
void ipc_imem_pm_resume(struct iosm_imem *ipc_imem);
/**
* ipc_imem_cleanup - Inform CP and free the shared memory resources.
* @ipc_imem: Pointer to imem data-struct
*/
void ipc_imem_cleanup(struct iosm_imem *ipc_imem);
/**
* ipc_imem_irq_process - Shift the IRQ actions to the IPC thread.
* @ipc_imem: Pointer to imem data-struct
* @irq: Irq number
*/
void ipc_imem_irq_process(struct iosm_imem *ipc_imem, int irq);
/**
* imem_get_device_sleep_state - Get the device sleep state value.
* @ipc_imem: Pointer to imem instance
*
* Returns: device sleep state
*/
int imem_get_device_sleep_state(struct iosm_imem *ipc_imem);
/**
* ipc_imem_td_update_timer_suspend - Updates the TD Update Timer suspend flag.
* @ipc_imem: Pointer to imem data-struct
* @suspend: Flag to update. If TRUE then HP update doorbell is triggered to
* device without any wait. If FALSE then HP update doorbell is
* delayed until timeout.
*/
void ipc_imem_td_update_timer_suspend(struct iosm_imem *ipc_imem, bool suspend);
/**
* ipc_imem_channel_close - Release the channel resources.
* @ipc_imem: Pointer to imem data-struct
* @channel_id: Channel ID to be cleaned up.
*/
void ipc_imem_channel_close(struct iosm_imem *ipc_imem, int channel_id);
/**
* ipc_imem_channel_alloc - Reserves a channel
* @ipc_imem: Pointer to imem data-struct
* @index: ID to lookup from the preallocated list.
* @ctype: Channel type.
*
* Returns: Index on success and failure value on error
*/
int ipc_imem_channel_alloc(struct iosm_imem *ipc_imem, int index,
enum ipc_ctype ctype);
/**
* ipc_imem_channel_open - Establish the pipes.
* @ipc_imem: Pointer to imem data-struct
* @channel_id: Channel ID returned during alloc.
* @db_id: Doorbell ID for trigger identifier.
*
* Returns: Pointer of ipc_mem_channel on success and NULL on failure.
*/
struct ipc_mem_channel *ipc_imem_channel_open(struct iosm_imem *ipc_imem,
int channel_id, u32 db_id);
/**
* ipc_imem_td_update_timer_start - Starts the TD Update Timer if not running.
* @ipc_imem: Pointer to imem data-struct
*/
void ipc_imem_td_update_timer_start(struct iosm_imem *ipc_imem);
/**
* ipc_imem_ul_write_td - Pass the channel UL list to protocol layer for TD
* preparation and sending them to the device.
* @ipc_imem: Pointer to imem data-struct
*
* Returns: TRUE of HP Doorbell trigger is pending. FALSE otherwise.
*/
bool ipc_imem_ul_write_td(struct iosm_imem *ipc_imem);
/**
* ipc_imem_ul_send - Dequeue SKB from channel list and start with
* the uplink transfer.If HP Doorbell is pending to be
* triggered then starts the TD Update Timer.
* @ipc_imem: Pointer to imem data-struct
*/
void ipc_imem_ul_send(struct iosm_imem *ipc_imem);
/**
* ipc_imem_channel_update - Set or modify pipe config of an existing channel
* @ipc_imem: Pointer to imem data-struct
* @id: Channel config index
* @chnl_cfg: Channel config struct
* @irq_moderation: Timer in usec for irq_moderation
*/
void ipc_imem_channel_update(struct iosm_imem *ipc_imem, int id,
struct ipc_chnl_cfg chnl_cfg, u32 irq_moderation);
/**
* ipc_imem_channel_free -Free an IPC channel.
* @channel: Channel to be freed
*/
void ipc_imem_channel_free(struct ipc_mem_channel *channel);
/**
* ipc_imem_hrtimer_stop - Stop the hrtimer
* @hr_timer: Pointer to hrtimer instance
*/
void ipc_imem_hrtimer_stop(struct hrtimer *hr_timer);
/**
* ipc_imem_pipe_cleanup - Reset volatile pipe content for all channels
* @ipc_imem: Pointer to imem data-struct
* @pipe: Pipe to cleaned up
*/
void ipc_imem_pipe_cleanup(struct iosm_imem *ipc_imem, struct ipc_pipe *pipe);
/**
* ipc_imem_pipe_close - Send msg to device to close pipe
* @ipc_imem: Pointer to imem data-struct
* @pipe: Pipe to be closed
*/
void ipc_imem_pipe_close(struct iosm_imem *ipc_imem, struct ipc_pipe *pipe);
/**
* ipc_imem_phase_update - Get the CP execution state
* and map it to the AP phase.
* @ipc_imem: Pointer to imem data-struct
*
* Returns: Current ap updated phase
*/
enum ipc_phase ipc_imem_phase_update(struct iosm_imem *ipc_imem);
/**
* ipc_imem_phase_get_string - Return the current operation
* phase as string.
* @phase: AP phase
*
* Returns: AP phase string
*/
const char *ipc_imem_phase_get_string(enum ipc_phase phase);
/**
* ipc_imem_msg_send_feature_set - Send feature set message to modem
* @ipc_imem: Pointer to imem data-struct
* @reset_enable: 0 = out-of-band, 1 = in-band-crash notification
* @atomic_ctx: if disabled call in tasklet context
*
*/
void ipc_imem_msg_send_feature_set(struct iosm_imem *ipc_imem,
unsigned int reset_enable, bool atomic_ctx);
/**
* ipc_imem_ipc_init_check - Send the init event to CP, wait a certain time and
* set CP to runtime with the context information
* @ipc_imem: Pointer to imem data-struct
*/
void ipc_imem_ipc_init_check(struct iosm_imem *ipc_imem);
/**
* ipc_imem_channel_init - Initialize the channel list with UL/DL pipe pairs.
* @ipc_imem: Pointer to imem data-struct
* @ctype: Channel type
* @chnl_cfg: Channel configuration struct
* @irq_moderation: Timer in usec for irq_moderation
*/
void ipc_imem_channel_init(struct iosm_imem *ipc_imem, enum ipc_ctype ctype,
struct ipc_chnl_cfg chnl_cfg, u32 irq_moderation);
/**
* ipc_imem_devlink_trigger_chip_info - Inform devlink that the chip
* information are available if the
* flashing to RAM interworking shall be
* executed.
* @ipc_imem: Pointer to imem structure
*
* Returns: 0 on success, -1 on failure
*/
int ipc_imem_devlink_trigger_chip_info(struct iosm_imem *ipc_imem);
void ipc_imem_adb_timer_start(struct iosm_imem *ipc_imem);
#endif