|  | // SPDX-License-Identifier: GPL-2.0+ | 
|  | /* | 
|  | * Copyright (C) 2003-2008 Takahiro Hirofuchi | 
|  | * Copyright (C) 2015-2016 Nobuo Iwata | 
|  | */ | 
|  |  | 
|  | #include <linux/init.h> | 
|  | #include <linux/file.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/kthread.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/slab.h> | 
|  |  | 
|  | #include "usbip_common.h" | 
|  | #include "vhci.h" | 
|  |  | 
|  | #define DRIVER_AUTHOR "Takahiro Hirofuchi" | 
|  | #define DRIVER_DESC "USB/IP 'Virtual' Host Controller (VHCI) Driver" | 
|  |  | 
|  | /* | 
|  | * TODO | 
|  | *	- update root hub emulation | 
|  | *	- move the emulation code to userland ? | 
|  | *		porting to other operating systems | 
|  | *		minimize kernel code | 
|  | *	- add suspend/resume code | 
|  | *	- clean up everything | 
|  | */ | 
|  |  | 
|  | /* See usb gadget dummy hcd */ | 
|  |  | 
|  | static int vhci_hub_status(struct usb_hcd *hcd, char *buff); | 
|  | static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, | 
|  | u16 wIndex, char *buff, u16 wLength); | 
|  | static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, | 
|  | gfp_t mem_flags); | 
|  | static int vhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status); | 
|  | static int vhci_start(struct usb_hcd *vhci_hcd); | 
|  | static void vhci_stop(struct usb_hcd *hcd); | 
|  | static int vhci_get_frame_number(struct usb_hcd *hcd); | 
|  |  | 
|  | static const char driver_name[] = "vhci_hcd"; | 
|  | static const char driver_desc[] = "USB/IP Virtual Host Controller"; | 
|  |  | 
|  | int vhci_num_controllers = VHCI_NR_HCS; | 
|  | struct vhci *vhcis; | 
|  |  | 
|  | static const char * const bit_desc[] = { | 
|  | "CONNECTION",		/*0*/ | 
|  | "ENABLE",		/*1*/ | 
|  | "SUSPEND",		/*2*/ | 
|  | "OVER_CURRENT",		/*3*/ | 
|  | "RESET",		/*4*/ | 
|  | "L1",			/*5*/ | 
|  | "R6",			/*6*/ | 
|  | "R7",			/*7*/ | 
|  | "POWER",		/*8*/ | 
|  | "LOWSPEED",		/*9*/ | 
|  | "HIGHSPEED",		/*10*/ | 
|  | "PORT_TEST",		/*11*/ | 
|  | "INDICATOR",		/*12*/ | 
|  | "R13",			/*13*/ | 
|  | "R14",			/*14*/ | 
|  | "R15",			/*15*/ | 
|  | "C_CONNECTION",		/*16*/ | 
|  | "C_ENABLE",		/*17*/ | 
|  | "C_SUSPEND",		/*18*/ | 
|  | "C_OVER_CURRENT",	/*19*/ | 
|  | "C_RESET",		/*20*/ | 
|  | "C_L1",			/*21*/ | 
|  | "R22",			/*22*/ | 
|  | "R23",			/*23*/ | 
|  | "R24",			/*24*/ | 
|  | "R25",			/*25*/ | 
|  | "R26",			/*26*/ | 
|  | "R27",			/*27*/ | 
|  | "R28",			/*28*/ | 
|  | "R29",			/*29*/ | 
|  | "R30",			/*30*/ | 
|  | "R31",			/*31*/ | 
|  | }; | 
|  |  | 
|  | static const char * const bit_desc_ss[] = { | 
|  | "CONNECTION",		/*0*/ | 
|  | "ENABLE",		/*1*/ | 
|  | "SUSPEND",		/*2*/ | 
|  | "OVER_CURRENT",		/*3*/ | 
|  | "RESET",		/*4*/ | 
|  | "L1",			/*5*/ | 
|  | "R6",			/*6*/ | 
|  | "R7",			/*7*/ | 
|  | "R8",			/*8*/ | 
|  | "POWER",		/*9*/ | 
|  | "HIGHSPEED",		/*10*/ | 
|  | "PORT_TEST",		/*11*/ | 
|  | "INDICATOR",		/*12*/ | 
|  | "R13",			/*13*/ | 
|  | "R14",			/*14*/ | 
|  | "R15",			/*15*/ | 
|  | "C_CONNECTION",		/*16*/ | 
|  | "C_ENABLE",		/*17*/ | 
|  | "C_SUSPEND",		/*18*/ | 
|  | "C_OVER_CURRENT",	/*19*/ | 
|  | "C_RESET",		/*20*/ | 
|  | "C_BH_RESET",		/*21*/ | 
|  | "C_LINK_STATE",		/*22*/ | 
|  | "C_CONFIG_ERROR",	/*23*/ | 
|  | "R24",			/*24*/ | 
|  | "R25",			/*25*/ | 
|  | "R26",			/*26*/ | 
|  | "R27",			/*27*/ | 
|  | "R28",			/*28*/ | 
|  | "R29",			/*29*/ | 
|  | "R30",			/*30*/ | 
|  | "R31",			/*31*/ | 
|  | }; | 
|  |  | 
|  | static void dump_port_status_diff(u32 prev_status, u32 new_status, bool usb3) | 
|  | { | 
|  | int i = 0; | 
|  | u32 bit = 1; | 
|  | const char * const *desc = bit_desc; | 
|  |  | 
|  | if (usb3) | 
|  | desc = bit_desc_ss; | 
|  |  | 
|  | pr_debug("status prev -> new: %08x -> %08x\n", prev_status, new_status); | 
|  | while (bit) { | 
|  | u32 prev = prev_status & bit; | 
|  | u32 new = new_status & bit; | 
|  | char change; | 
|  |  | 
|  | if (!prev && new) | 
|  | change = '+'; | 
|  | else if (prev && !new) | 
|  | change = '-'; | 
|  | else | 
|  | change = ' '; | 
|  |  | 
|  | if (prev || new) { | 
|  | pr_debug(" %c%s\n", change, desc[i]); | 
|  |  | 
|  | if (bit == 1) /* USB_PORT_STAT_CONNECTION */ | 
|  | pr_debug(" %c%s\n", change, "USB_PORT_STAT_SPEED_5GBPS"); | 
|  | } | 
|  | bit <<= 1; | 
|  | i++; | 
|  | } | 
|  | pr_debug("\n"); | 
|  | } | 
|  |  | 
|  | void rh_port_connect(struct vhci_device *vdev, enum usb_device_speed speed) | 
|  | { | 
|  | struct vhci_hcd	*vhci_hcd = vdev_to_vhci_hcd(vdev); | 
|  | struct vhci *vhci = vhci_hcd->vhci; | 
|  | int		rhport = vdev->rhport; | 
|  | u32		status; | 
|  | unsigned long	flags; | 
|  |  | 
|  | usbip_dbg_vhci_rh("rh_port_connect %d\n", rhport); | 
|  |  | 
|  | spin_lock_irqsave(&vhci->lock, flags); | 
|  |  | 
|  | status = vhci_hcd->port_status[rhport]; | 
|  |  | 
|  | status |= USB_PORT_STAT_CONNECTION | (1 << USB_PORT_FEAT_C_CONNECTION); | 
|  |  | 
|  | switch (speed) { | 
|  | case USB_SPEED_HIGH: | 
|  | status |= USB_PORT_STAT_HIGH_SPEED; | 
|  | break; | 
|  | case USB_SPEED_LOW: | 
|  | status |= USB_PORT_STAT_LOW_SPEED; | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  |  | 
|  | vhci_hcd->port_status[rhport] = status; | 
|  |  | 
|  | spin_unlock_irqrestore(&vhci->lock, flags); | 
|  |  | 
|  | usb_hcd_poll_rh_status(vhci_hcd_to_hcd(vhci_hcd)); | 
|  | } | 
|  |  | 
|  | static void rh_port_disconnect(struct vhci_device *vdev) | 
|  | { | 
|  | struct vhci_hcd	*vhci_hcd = vdev_to_vhci_hcd(vdev); | 
|  | struct vhci *vhci = vhci_hcd->vhci; | 
|  | int		rhport = vdev->rhport; | 
|  | u32		status; | 
|  | unsigned long	flags; | 
|  |  | 
|  | usbip_dbg_vhci_rh("rh_port_disconnect %d\n", rhport); | 
|  |  | 
|  | spin_lock_irqsave(&vhci->lock, flags); | 
|  |  | 
|  | status = vhci_hcd->port_status[rhport]; | 
|  |  | 
|  | status &= ~USB_PORT_STAT_CONNECTION; | 
|  | status |= (1 << USB_PORT_FEAT_C_CONNECTION); | 
|  |  | 
|  | vhci_hcd->port_status[rhport] = status; | 
|  |  | 
|  | spin_unlock_irqrestore(&vhci->lock, flags); | 
|  | usb_hcd_poll_rh_status(vhci_hcd_to_hcd(vhci_hcd)); | 
|  | } | 
|  |  | 
|  | #define PORT_C_MASK				\ | 
|  | ((USB_PORT_STAT_C_CONNECTION		\ | 
|  | | USB_PORT_STAT_C_ENABLE		\ | 
|  | | USB_PORT_STAT_C_SUSPEND		\ | 
|  | | USB_PORT_STAT_C_OVERCURRENT		\ | 
|  | | USB_PORT_STAT_C_RESET) << 16) | 
|  |  | 
|  | /* | 
|  | * Returns 0 if the status hasn't changed, or the number of bytes in buf. | 
|  | * Ports are 0-indexed from the HCD point of view, | 
|  | * and 1-indexed from the USB core pointer of view. | 
|  | * | 
|  | * @buf: a bitmap to show which port status has been changed. | 
|  | *  bit  0: reserved | 
|  | *  bit  1: the status of port 0 has been changed. | 
|  | *  bit  2: the status of port 1 has been changed. | 
|  | *  ... | 
|  | */ | 
|  | static int vhci_hub_status(struct usb_hcd *hcd, char *buf) | 
|  | { | 
|  | struct vhci_hcd	*vhci_hcd = hcd_to_vhci_hcd(hcd); | 
|  | struct vhci *vhci = vhci_hcd->vhci; | 
|  | int		retval = DIV_ROUND_UP(VHCI_HC_PORTS + 1, 8); | 
|  | int		rhport; | 
|  | int		changed = 0; | 
|  | unsigned long	flags; | 
|  |  | 
|  | memset(buf, 0, retval); | 
|  |  | 
|  | spin_lock_irqsave(&vhci->lock, flags); | 
|  | if (!HCD_HW_ACCESSIBLE(hcd)) { | 
|  | usbip_dbg_vhci_rh("hw accessible flag not on?\n"); | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | /* check pseudo status register for each port */ | 
|  | for (rhport = 0; rhport < VHCI_HC_PORTS; rhport++) { | 
|  | if ((vhci_hcd->port_status[rhport] & PORT_C_MASK)) { | 
|  | /* The status of a port has been changed, */ | 
|  | usbip_dbg_vhci_rh("port %d status changed\n", rhport); | 
|  |  | 
|  | buf[(rhport + 1) / 8] |= 1 << (rhport + 1) % 8; | 
|  | changed = 1; | 
|  | } | 
|  | } | 
|  |  | 
|  | if ((hcd->state == HC_STATE_SUSPENDED) && (changed == 1)) | 
|  | usb_hcd_resume_root_hub(hcd); | 
|  |  | 
|  | done: | 
|  | spin_unlock_irqrestore(&vhci->lock, flags); | 
|  | return changed ? retval : 0; | 
|  | } | 
|  |  | 
|  | /* usb 3.0 root hub device descriptor */ | 
|  | static struct { | 
|  | struct usb_bos_descriptor bos; | 
|  | struct usb_ss_cap_descriptor ss_cap; | 
|  | } __packed usb3_bos_desc = { | 
|  |  | 
|  | .bos = { | 
|  | .bLength		= USB_DT_BOS_SIZE, | 
|  | .bDescriptorType	= USB_DT_BOS, | 
|  | .wTotalLength		= cpu_to_le16(sizeof(usb3_bos_desc)), | 
|  | .bNumDeviceCaps		= 1, | 
|  | }, | 
|  | .ss_cap = { | 
|  | .bLength		= USB_DT_USB_SS_CAP_SIZE, | 
|  | .bDescriptorType	= USB_DT_DEVICE_CAPABILITY, | 
|  | .bDevCapabilityType	= USB_SS_CAP_TYPE, | 
|  | .wSpeedSupported	= cpu_to_le16(USB_5GBPS_OPERATION), | 
|  | .bFunctionalitySupport	= ilog2(USB_5GBPS_OPERATION), | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static inline void | 
|  | ss_hub_descriptor(struct usb_hub_descriptor *desc) | 
|  | { | 
|  | memset(desc, 0, sizeof *desc); | 
|  | desc->bDescriptorType = USB_DT_SS_HUB; | 
|  | desc->bDescLength = 12; | 
|  | desc->wHubCharacteristics = cpu_to_le16( | 
|  | HUB_CHAR_INDV_PORT_LPSM | HUB_CHAR_COMMON_OCPM); | 
|  | desc->bNbrPorts = VHCI_HC_PORTS; | 
|  | desc->u.ss.bHubHdrDecLat = 0x04; /* Worst case: 0.4 micro sec*/ | 
|  | desc->u.ss.DeviceRemovable = 0xffff; | 
|  | } | 
|  |  | 
|  | static inline void hub_descriptor(struct usb_hub_descriptor *desc) | 
|  | { | 
|  | int width; | 
|  |  | 
|  | memset(desc, 0, sizeof(*desc)); | 
|  | desc->bDescriptorType = USB_DT_HUB; | 
|  | desc->wHubCharacteristics = cpu_to_le16( | 
|  | HUB_CHAR_INDV_PORT_LPSM | HUB_CHAR_COMMON_OCPM); | 
|  |  | 
|  | desc->bNbrPorts = VHCI_HC_PORTS; | 
|  | BUILD_BUG_ON(VHCI_HC_PORTS > USB_MAXCHILDREN); | 
|  | width = desc->bNbrPorts / 8 + 1; | 
|  | desc->bDescLength = USB_DT_HUB_NONVAR_SIZE + 2 * width; | 
|  | memset(&desc->u.hs.DeviceRemovable[0], 0, width); | 
|  | memset(&desc->u.hs.DeviceRemovable[width], 0xff, width); | 
|  | } | 
|  |  | 
|  | static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, | 
|  | u16 wIndex, char *buf, u16 wLength) | 
|  | { | 
|  | struct vhci_hcd	*vhci_hcd; | 
|  | struct vhci	*vhci; | 
|  | int             retval = 0; | 
|  | int		rhport; | 
|  | unsigned long	flags; | 
|  |  | 
|  | u32 prev_port_status[VHCI_HC_PORTS]; | 
|  |  | 
|  | if (!HCD_HW_ACCESSIBLE(hcd)) | 
|  | return -ETIMEDOUT; | 
|  |  | 
|  | /* | 
|  | * NOTE: | 
|  | * wIndex (bits 0-7) shows the port number and begins from 1? | 
|  | */ | 
|  | wIndex = ((__u8)(wIndex & 0x00ff)); | 
|  | usbip_dbg_vhci_rh("typeReq %x wValue %x wIndex %x\n", typeReq, wValue, | 
|  | wIndex); | 
|  |  | 
|  | if (wIndex > VHCI_HC_PORTS) | 
|  | pr_err("invalid port number %d\n", wIndex); | 
|  | rhport = wIndex - 1; | 
|  |  | 
|  | vhci_hcd = hcd_to_vhci_hcd(hcd); | 
|  | vhci = vhci_hcd->vhci; | 
|  |  | 
|  | spin_lock_irqsave(&vhci->lock, flags); | 
|  |  | 
|  | /* store old status and compare now and old later */ | 
|  | if (usbip_dbg_flag_vhci_rh) { | 
|  | memcpy(prev_port_status, vhci_hcd->port_status, | 
|  | sizeof(prev_port_status)); | 
|  | } | 
|  |  | 
|  | switch (typeReq) { | 
|  | case ClearHubFeature: | 
|  | usbip_dbg_vhci_rh(" ClearHubFeature\n"); | 
|  | break; | 
|  | case ClearPortFeature: | 
|  | switch (wValue) { | 
|  | case USB_PORT_FEAT_SUSPEND: | 
|  | if (hcd->speed == HCD_USB3) { | 
|  | pr_err(" ClearPortFeature: USB_PORT_FEAT_SUSPEND req not " | 
|  | "supported for USB 3.0 roothub\n"); | 
|  | goto error; | 
|  | } | 
|  | usbip_dbg_vhci_rh( | 
|  | " ClearPortFeature: USB_PORT_FEAT_SUSPEND\n"); | 
|  | if (vhci_hcd->port_status[rhport] & USB_PORT_STAT_SUSPEND) { | 
|  | /* 20msec signaling */ | 
|  | vhci_hcd->resuming = 1; | 
|  | vhci_hcd->re_timeout = jiffies + msecs_to_jiffies(20); | 
|  | } | 
|  | break; | 
|  | case USB_PORT_FEAT_POWER: | 
|  | usbip_dbg_vhci_rh( | 
|  | " ClearPortFeature: USB_PORT_FEAT_POWER\n"); | 
|  | if (hcd->speed == HCD_USB3) | 
|  | vhci_hcd->port_status[rhport] &= ~USB_SS_PORT_STAT_POWER; | 
|  | else | 
|  | vhci_hcd->port_status[rhport] &= ~USB_PORT_STAT_POWER; | 
|  | break; | 
|  | default: | 
|  | usbip_dbg_vhci_rh(" ClearPortFeature: default %x\n", | 
|  | wValue); | 
|  | vhci_hcd->port_status[rhport] &= ~(1 << wValue); | 
|  | break; | 
|  | } | 
|  | break; | 
|  | case GetHubDescriptor: | 
|  | usbip_dbg_vhci_rh(" GetHubDescriptor\n"); | 
|  | if (hcd->speed == HCD_USB3 && | 
|  | (wLength < USB_DT_SS_HUB_SIZE || | 
|  | wValue != (USB_DT_SS_HUB << 8))) { | 
|  | pr_err("Wrong hub descriptor type for USB 3.0 roothub.\n"); | 
|  | goto error; | 
|  | } | 
|  | if (hcd->speed == HCD_USB3) | 
|  | ss_hub_descriptor((struct usb_hub_descriptor *) buf); | 
|  | else | 
|  | hub_descriptor((struct usb_hub_descriptor *) buf); | 
|  | break; | 
|  | case DeviceRequest | USB_REQ_GET_DESCRIPTOR: | 
|  | if (hcd->speed != HCD_USB3) | 
|  | goto error; | 
|  |  | 
|  | if ((wValue >> 8) != USB_DT_BOS) | 
|  | goto error; | 
|  |  | 
|  | memcpy(buf, &usb3_bos_desc, sizeof(usb3_bos_desc)); | 
|  | retval = sizeof(usb3_bos_desc); | 
|  | break; | 
|  | case GetHubStatus: | 
|  | usbip_dbg_vhci_rh(" GetHubStatus\n"); | 
|  | *(__le32 *) buf = cpu_to_le32(0); | 
|  | break; | 
|  | case GetPortStatus: | 
|  | usbip_dbg_vhci_rh(" GetPortStatus port %x\n", wIndex); | 
|  | if (wIndex < 1) { | 
|  | pr_err("invalid port number %d\n", wIndex); | 
|  | retval = -EPIPE; | 
|  | } | 
|  |  | 
|  | /* we do not care about resume. */ | 
|  |  | 
|  | /* whoever resets or resumes must GetPortStatus to | 
|  | * complete it!! | 
|  | */ | 
|  | if (vhci_hcd->resuming && time_after(jiffies, vhci_hcd->re_timeout)) { | 
|  | vhci_hcd->port_status[rhport] |= (1 << USB_PORT_FEAT_C_SUSPEND); | 
|  | vhci_hcd->port_status[rhport] &= ~(1 << USB_PORT_FEAT_SUSPEND); | 
|  | vhci_hcd->resuming = 0; | 
|  | vhci_hcd->re_timeout = 0; | 
|  | } | 
|  |  | 
|  | if ((vhci_hcd->port_status[rhport] & (1 << USB_PORT_FEAT_RESET)) != | 
|  | 0 && time_after(jiffies, vhci_hcd->re_timeout)) { | 
|  | vhci_hcd->port_status[rhport] |= (1 << USB_PORT_FEAT_C_RESET); | 
|  | vhci_hcd->port_status[rhport] &= ~(1 << USB_PORT_FEAT_RESET); | 
|  | vhci_hcd->re_timeout = 0; | 
|  |  | 
|  | if (vhci_hcd->vdev[rhport].ud.status == | 
|  | VDEV_ST_NOTASSIGNED) { | 
|  | usbip_dbg_vhci_rh( | 
|  | " enable rhport %d (status %u)\n", | 
|  | rhport, | 
|  | vhci_hcd->vdev[rhport].ud.status); | 
|  | vhci_hcd->port_status[rhport] |= | 
|  | USB_PORT_STAT_ENABLE; | 
|  | } | 
|  |  | 
|  | if (hcd->speed < HCD_USB3) { | 
|  | switch (vhci_hcd->vdev[rhport].speed) { | 
|  | case USB_SPEED_HIGH: | 
|  | vhci_hcd->port_status[rhport] |= | 
|  | USB_PORT_STAT_HIGH_SPEED; | 
|  | break; | 
|  | case USB_SPEED_LOW: | 
|  | vhci_hcd->port_status[rhport] |= | 
|  | USB_PORT_STAT_LOW_SPEED; | 
|  | break; | 
|  | default: | 
|  | pr_err("vhci_device speed not set\n"); | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  | ((__le16 *) buf)[0] = cpu_to_le16(vhci_hcd->port_status[rhport]); | 
|  | ((__le16 *) buf)[1] = | 
|  | cpu_to_le16(vhci_hcd->port_status[rhport] >> 16); | 
|  |  | 
|  | usbip_dbg_vhci_rh(" GetPortStatus bye %x %x\n", ((u16 *)buf)[0], | 
|  | ((u16 *)buf)[1]); | 
|  | break; | 
|  | case SetHubFeature: | 
|  | usbip_dbg_vhci_rh(" SetHubFeature\n"); | 
|  | retval = -EPIPE; | 
|  | break; | 
|  | case SetPortFeature: | 
|  | switch (wValue) { | 
|  | case USB_PORT_FEAT_LINK_STATE: | 
|  | usbip_dbg_vhci_rh( | 
|  | " SetPortFeature: USB_PORT_FEAT_LINK_STATE\n"); | 
|  | if (hcd->speed != HCD_USB3) { | 
|  | pr_err("USB_PORT_FEAT_LINK_STATE req not " | 
|  | "supported for USB 2.0 roothub\n"); | 
|  | goto error; | 
|  | } | 
|  | /* | 
|  | * Since this is dummy we don't have an actual link so | 
|  | * there is nothing to do for the SET_LINK_STATE cmd | 
|  | */ | 
|  | break; | 
|  | case USB_PORT_FEAT_U1_TIMEOUT: | 
|  | usbip_dbg_vhci_rh( | 
|  | " SetPortFeature: USB_PORT_FEAT_U1_TIMEOUT\n"); | 
|  | case USB_PORT_FEAT_U2_TIMEOUT: | 
|  | usbip_dbg_vhci_rh( | 
|  | " SetPortFeature: USB_PORT_FEAT_U2_TIMEOUT\n"); | 
|  | /* TODO: add suspend/resume support! */ | 
|  | if (hcd->speed != HCD_USB3) { | 
|  | pr_err("USB_PORT_FEAT_U1/2_TIMEOUT req not " | 
|  | "supported for USB 2.0 roothub\n"); | 
|  | goto error; | 
|  | } | 
|  | break; | 
|  | case USB_PORT_FEAT_SUSPEND: | 
|  | usbip_dbg_vhci_rh( | 
|  | " SetPortFeature: USB_PORT_FEAT_SUSPEND\n"); | 
|  | /* Applicable only for USB2.0 hub */ | 
|  | if (hcd->speed == HCD_USB3) { | 
|  | pr_err("USB_PORT_FEAT_SUSPEND req not " | 
|  | "supported for USB 3.0 roothub\n"); | 
|  | goto error; | 
|  | } | 
|  |  | 
|  | vhci_hcd->port_status[rhport] |= USB_PORT_STAT_SUSPEND; | 
|  | break; | 
|  | case USB_PORT_FEAT_POWER: | 
|  | usbip_dbg_vhci_rh( | 
|  | " SetPortFeature: USB_PORT_FEAT_POWER\n"); | 
|  | if (hcd->speed == HCD_USB3) | 
|  | vhci_hcd->port_status[rhport] |= USB_SS_PORT_STAT_POWER; | 
|  | else | 
|  | vhci_hcd->port_status[rhport] |= USB_PORT_STAT_POWER; | 
|  | break; | 
|  | case USB_PORT_FEAT_BH_PORT_RESET: | 
|  | usbip_dbg_vhci_rh( | 
|  | " SetPortFeature: USB_PORT_FEAT_BH_PORT_RESET\n"); | 
|  | /* Applicable only for USB3.0 hub */ | 
|  | if (hcd->speed != HCD_USB3) { | 
|  | pr_err("USB_PORT_FEAT_BH_PORT_RESET req not " | 
|  | "supported for USB 2.0 roothub\n"); | 
|  | goto error; | 
|  | } | 
|  | /* FALLS THROUGH */ | 
|  | case USB_PORT_FEAT_RESET: | 
|  | usbip_dbg_vhci_rh( | 
|  | " SetPortFeature: USB_PORT_FEAT_RESET\n"); | 
|  | /* if it's already enabled, disable */ | 
|  | if (hcd->speed == HCD_USB3) { | 
|  | vhci_hcd->port_status[rhport] = 0; | 
|  | vhci_hcd->port_status[rhport] = | 
|  | (USB_SS_PORT_STAT_POWER | | 
|  | USB_PORT_STAT_CONNECTION | | 
|  | USB_PORT_STAT_RESET); | 
|  | } else if (vhci_hcd->port_status[rhport] & USB_PORT_STAT_ENABLE) { | 
|  | vhci_hcd->port_status[rhport] &= ~(USB_PORT_STAT_ENABLE | 
|  | | USB_PORT_STAT_LOW_SPEED | 
|  | | USB_PORT_STAT_HIGH_SPEED); | 
|  | } | 
|  |  | 
|  | /* 50msec reset signaling */ | 
|  | vhci_hcd->re_timeout = jiffies + msecs_to_jiffies(50); | 
|  |  | 
|  | /* FALLS THROUGH */ | 
|  | default: | 
|  | usbip_dbg_vhci_rh(" SetPortFeature: default %d\n", | 
|  | wValue); | 
|  | if (hcd->speed == HCD_USB3) { | 
|  | if ((vhci_hcd->port_status[rhport] & | 
|  | USB_SS_PORT_STAT_POWER) != 0) { | 
|  | vhci_hcd->port_status[rhport] |= (1 << wValue); | 
|  | } | 
|  | } else | 
|  | if ((vhci_hcd->port_status[rhport] & | 
|  | USB_PORT_STAT_POWER) != 0) { | 
|  | vhci_hcd->port_status[rhport] |= (1 << wValue); | 
|  | } | 
|  | } | 
|  | break; | 
|  | case GetPortErrorCount: | 
|  | usbip_dbg_vhci_rh(" GetPortErrorCount\n"); | 
|  | if (hcd->speed != HCD_USB3) { | 
|  | pr_err("GetPortErrorCount req not " | 
|  | "supported for USB 2.0 roothub\n"); | 
|  | goto error; | 
|  | } | 
|  | /* We'll always return 0 since this is a dummy hub */ | 
|  | *(__le32 *) buf = cpu_to_le32(0); | 
|  | break; | 
|  | case SetHubDepth: | 
|  | usbip_dbg_vhci_rh(" SetHubDepth\n"); | 
|  | if (hcd->speed != HCD_USB3) { | 
|  | pr_err("SetHubDepth req not supported for " | 
|  | "USB 2.0 roothub\n"); | 
|  | goto error; | 
|  | } | 
|  | break; | 
|  | default: | 
|  | pr_err("default hub control req: %04x v%04x i%04x l%d\n", | 
|  | typeReq, wValue, wIndex, wLength); | 
|  | error: | 
|  | /* "protocol stall" on error */ | 
|  | retval = -EPIPE; | 
|  | } | 
|  |  | 
|  | if (usbip_dbg_flag_vhci_rh) { | 
|  | pr_debug("port %d\n", rhport); | 
|  | /* Only dump valid port status */ | 
|  | if (rhport >= 0) { | 
|  | dump_port_status_diff(prev_port_status[rhport], | 
|  | vhci_hcd->port_status[rhport], | 
|  | hcd->speed == HCD_USB3); | 
|  | } | 
|  | } | 
|  | usbip_dbg_vhci_rh(" bye\n"); | 
|  |  | 
|  | spin_unlock_irqrestore(&vhci->lock, flags); | 
|  |  | 
|  | if ((vhci_hcd->port_status[rhport] & PORT_C_MASK) != 0) | 
|  | usb_hcd_poll_rh_status(hcd); | 
|  |  | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | static void vhci_tx_urb(struct urb *urb, struct vhci_device *vdev) | 
|  | { | 
|  | struct vhci_priv *priv; | 
|  | struct vhci_hcd *vhci_hcd; | 
|  | unsigned long flags; | 
|  |  | 
|  | if (!vdev) { | 
|  | pr_err("could not get virtual device"); | 
|  | return; | 
|  | } | 
|  | vhci_hcd = vdev_to_vhci_hcd(vdev); | 
|  |  | 
|  | priv = kzalloc(sizeof(struct vhci_priv), GFP_ATOMIC); | 
|  | if (!priv) { | 
|  | usbip_event_add(&vdev->ud, VDEV_EVENT_ERROR_MALLOC); | 
|  | return; | 
|  | } | 
|  |  | 
|  | spin_lock_irqsave(&vdev->priv_lock, flags); | 
|  |  | 
|  | priv->seqnum = atomic_inc_return(&vhci_hcd->seqnum); | 
|  | if (priv->seqnum == 0xffff) | 
|  | dev_info(&urb->dev->dev, "seqnum max\n"); | 
|  |  | 
|  | priv->vdev = vdev; | 
|  | priv->urb = urb; | 
|  |  | 
|  | urb->hcpriv = (void *) priv; | 
|  |  | 
|  | list_add_tail(&priv->list, &vdev->priv_tx); | 
|  |  | 
|  | wake_up(&vdev->waitq_tx); | 
|  | spin_unlock_irqrestore(&vdev->priv_lock, flags); | 
|  | } | 
|  |  | 
|  | static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags) | 
|  | { | 
|  | struct vhci_hcd *vhci_hcd = hcd_to_vhci_hcd(hcd); | 
|  | struct vhci *vhci = vhci_hcd->vhci; | 
|  | struct device *dev = &urb->dev->dev; | 
|  | u8 portnum = urb->dev->portnum; | 
|  | int ret = 0; | 
|  | struct vhci_device *vdev; | 
|  | unsigned long flags; | 
|  |  | 
|  | usbip_dbg_vhci_hc("enter, usb_hcd %p urb %p mem_flags %d\n", | 
|  | hcd, urb, mem_flags); | 
|  |  | 
|  | if (portnum > VHCI_HC_PORTS) { | 
|  | pr_err("invalid port number %d\n", portnum); | 
|  | return -ENODEV; | 
|  | } | 
|  | vdev = &vhci_hcd->vdev[portnum-1]; | 
|  |  | 
|  | /* patch to usb_sg_init() is in 2.5.60 */ | 
|  | BUG_ON(!urb->transfer_buffer && urb->transfer_buffer_length); | 
|  |  | 
|  | spin_lock_irqsave(&vhci->lock, flags); | 
|  |  | 
|  | if (urb->status != -EINPROGRESS) { | 
|  | dev_err(dev, "URB already unlinked!, status %d\n", urb->status); | 
|  | spin_unlock_irqrestore(&vhci->lock, flags); | 
|  | return urb->status; | 
|  | } | 
|  |  | 
|  | /* refuse enqueue for dead connection */ | 
|  | spin_lock(&vdev->ud.lock); | 
|  | if (vdev->ud.status == VDEV_ST_NULL || | 
|  | vdev->ud.status == VDEV_ST_ERROR) { | 
|  | dev_err(dev, "enqueue for inactive port %d\n", vdev->rhport); | 
|  | spin_unlock(&vdev->ud.lock); | 
|  | spin_unlock_irqrestore(&vhci->lock, flags); | 
|  | return -ENODEV; | 
|  | } | 
|  | spin_unlock(&vdev->ud.lock); | 
|  |  | 
|  | ret = usb_hcd_link_urb_to_ep(hcd, urb); | 
|  | if (ret) | 
|  | goto no_need_unlink; | 
|  |  | 
|  | /* | 
|  | * The enumeration process is as follows; | 
|  | * | 
|  | *  1. Get_Descriptor request to DevAddrs(0) EndPoint(0) | 
|  | *     to get max packet length of default pipe | 
|  | * | 
|  | *  2. Set_Address request to DevAddr(0) EndPoint(0) | 
|  | * | 
|  | */ | 
|  | if (usb_pipedevice(urb->pipe) == 0) { | 
|  | __u8 type = usb_pipetype(urb->pipe); | 
|  | struct usb_ctrlrequest *ctrlreq = | 
|  | (struct usb_ctrlrequest *) urb->setup_packet; | 
|  |  | 
|  | if (type != PIPE_CONTROL || !ctrlreq) { | 
|  | dev_err(dev, "invalid request to devnum 0\n"); | 
|  | ret = -EINVAL; | 
|  | goto no_need_xmit; | 
|  | } | 
|  |  | 
|  | switch (ctrlreq->bRequest) { | 
|  | case USB_REQ_SET_ADDRESS: | 
|  | /* set_address may come when a device is reset */ | 
|  | dev_info(dev, "SetAddress Request (%d) to port %d\n", | 
|  | ctrlreq->wValue, vdev->rhport); | 
|  |  | 
|  | usb_put_dev(vdev->udev); | 
|  | vdev->udev = usb_get_dev(urb->dev); | 
|  |  | 
|  | spin_lock(&vdev->ud.lock); | 
|  | vdev->ud.status = VDEV_ST_USED; | 
|  | spin_unlock(&vdev->ud.lock); | 
|  |  | 
|  | if (urb->status == -EINPROGRESS) { | 
|  | /* This request is successfully completed. */ | 
|  | /* If not -EINPROGRESS, possibly unlinked. */ | 
|  | urb->status = 0; | 
|  | } | 
|  |  | 
|  | goto no_need_xmit; | 
|  |  | 
|  | case USB_REQ_GET_DESCRIPTOR: | 
|  | if (ctrlreq->wValue == cpu_to_le16(USB_DT_DEVICE << 8)) | 
|  | usbip_dbg_vhci_hc( | 
|  | "Not yet?:Get_Descriptor to device 0 (get max pipe size)\n"); | 
|  |  | 
|  | usb_put_dev(vdev->udev); | 
|  | vdev->udev = usb_get_dev(urb->dev); | 
|  | goto out; | 
|  |  | 
|  | default: | 
|  | /* NOT REACHED */ | 
|  | dev_err(dev, | 
|  | "invalid request to devnum 0 bRequest %u, wValue %u\n", | 
|  | ctrlreq->bRequest, | 
|  | ctrlreq->wValue); | 
|  | ret =  -EINVAL; | 
|  | goto no_need_xmit; | 
|  | } | 
|  |  | 
|  | } | 
|  |  | 
|  | out: | 
|  | vhci_tx_urb(urb, vdev); | 
|  | spin_unlock_irqrestore(&vhci->lock, flags); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | no_need_xmit: | 
|  | usb_hcd_unlink_urb_from_ep(hcd, urb); | 
|  | no_need_unlink: | 
|  | spin_unlock_irqrestore(&vhci->lock, flags); | 
|  | if (!ret) | 
|  | usb_hcd_giveback_urb(hcd, urb, urb->status); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * vhci_rx gives back the urb after receiving the reply of the urb.  If an | 
|  | * unlink pdu is sent or not, vhci_rx receives a normal return pdu and gives | 
|  | * back its urb. For the driver unlinking the urb, the content of the urb is | 
|  | * not important, but the calling to its completion handler is important; the | 
|  | * completion of unlinking is notified by the completion handler. | 
|  | * | 
|  | * | 
|  | * CLIENT SIDE | 
|  | * | 
|  | * - When vhci_hcd receives RET_SUBMIT, | 
|  | * | 
|  | *	- case 1a). the urb of the pdu is not unlinking. | 
|  | *		- normal case | 
|  | *		=> just give back the urb | 
|  | * | 
|  | *	- case 1b). the urb of the pdu is unlinking. | 
|  | *		- usbip.ko will return a reply of the unlinking request. | 
|  | *		=> give back the urb now and go to case 2b). | 
|  | * | 
|  | * - When vhci_hcd receives RET_UNLINK, | 
|  | * | 
|  | *	- case 2a). a submit request is still pending in vhci_hcd. | 
|  | *		- urb was really pending in usbip.ko and urb_unlink_urb() was | 
|  | *		  completed there. | 
|  | *		=> free a pending submit request | 
|  | *		=> notify unlink completeness by giving back the urb | 
|  | * | 
|  | *	- case 2b). a submit request is *not* pending in vhci_hcd. | 
|  | *		- urb was already given back to the core driver. | 
|  | *		=> do not give back the urb | 
|  | * | 
|  | * | 
|  | * SERVER SIDE | 
|  | * | 
|  | * - When usbip receives CMD_UNLINK, | 
|  | * | 
|  | *	- case 3a). the urb of the unlink request is now in submission. | 
|  | *		=> do usb_unlink_urb(). | 
|  | *		=> after the unlink is completed, send RET_UNLINK. | 
|  | * | 
|  | *	- case 3b). the urb of the unlink request is not in submission. | 
|  | *		- may be already completed or never be received | 
|  | *		=> send RET_UNLINK | 
|  | * | 
|  | */ | 
|  | static int vhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) | 
|  | { | 
|  | struct vhci_hcd *vhci_hcd = hcd_to_vhci_hcd(hcd); | 
|  | struct vhci *vhci = vhci_hcd->vhci; | 
|  | struct vhci_priv *priv; | 
|  | struct vhci_device *vdev; | 
|  | unsigned long flags; | 
|  |  | 
|  | pr_info("dequeue a urb %p\n", urb); | 
|  |  | 
|  | spin_lock_irqsave(&vhci->lock, flags); | 
|  |  | 
|  | priv = urb->hcpriv; | 
|  | if (!priv) { | 
|  | /* URB was never linked! or will be soon given back by | 
|  | * vhci_rx. */ | 
|  | spin_unlock_irqrestore(&vhci->lock, flags); | 
|  | return -EIDRM; | 
|  | } | 
|  |  | 
|  | { | 
|  | int ret = 0; | 
|  |  | 
|  | ret = usb_hcd_check_unlink_urb(hcd, urb, status); | 
|  | if (ret) { | 
|  | spin_unlock_irqrestore(&vhci->lock, flags); | 
|  | return ret; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* send unlink request here? */ | 
|  | vdev = priv->vdev; | 
|  |  | 
|  | if (!vdev->ud.tcp_socket) { | 
|  | /* tcp connection is closed */ | 
|  | spin_lock(&vdev->priv_lock); | 
|  |  | 
|  | pr_info("device %p seems to be disconnected\n", vdev); | 
|  | list_del(&priv->list); | 
|  | kfree(priv); | 
|  | urb->hcpriv = NULL; | 
|  |  | 
|  | spin_unlock(&vdev->priv_lock); | 
|  |  | 
|  | /* | 
|  | * If tcp connection is alive, we have sent CMD_UNLINK. | 
|  | * vhci_rx will receive RET_UNLINK and give back the URB. | 
|  | * Otherwise, we give back it here. | 
|  | */ | 
|  | pr_info("gives back urb %p\n", urb); | 
|  |  | 
|  | usb_hcd_unlink_urb_from_ep(hcd, urb); | 
|  |  | 
|  | spin_unlock_irqrestore(&vhci->lock, flags); | 
|  | usb_hcd_giveback_urb(hcd, urb, urb->status); | 
|  | spin_lock_irqsave(&vhci->lock, flags); | 
|  |  | 
|  | } else { | 
|  | /* tcp connection is alive */ | 
|  | struct vhci_unlink *unlink; | 
|  |  | 
|  | spin_lock(&vdev->priv_lock); | 
|  |  | 
|  | /* setup CMD_UNLINK pdu */ | 
|  | unlink = kzalloc(sizeof(struct vhci_unlink), GFP_ATOMIC); | 
|  | if (!unlink) { | 
|  | spin_unlock(&vdev->priv_lock); | 
|  | spin_unlock_irqrestore(&vhci->lock, flags); | 
|  | usbip_event_add(&vdev->ud, VDEV_EVENT_ERROR_MALLOC); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | unlink->seqnum = atomic_inc_return(&vhci_hcd->seqnum); | 
|  | if (unlink->seqnum == 0xffff) | 
|  | pr_info("seqnum max\n"); | 
|  |  | 
|  | unlink->unlink_seqnum = priv->seqnum; | 
|  |  | 
|  | pr_info("device %p seems to be still connected\n", vdev); | 
|  |  | 
|  | /* send cmd_unlink and try to cancel the pending URB in the | 
|  | * peer */ | 
|  | list_add_tail(&unlink->list, &vdev->unlink_tx); | 
|  | wake_up(&vdev->waitq_tx); | 
|  |  | 
|  | spin_unlock(&vdev->priv_lock); | 
|  | } | 
|  |  | 
|  | spin_unlock_irqrestore(&vhci->lock, flags); | 
|  |  | 
|  | usbip_dbg_vhci_hc("leave\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void vhci_device_unlink_cleanup(struct vhci_device *vdev) | 
|  | { | 
|  | struct vhci_hcd *vhci_hcd = vdev_to_vhci_hcd(vdev); | 
|  | struct usb_hcd *hcd = vhci_hcd_to_hcd(vhci_hcd); | 
|  | struct vhci *vhci = vhci_hcd->vhci; | 
|  | struct vhci_unlink *unlink, *tmp; | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&vhci->lock, flags); | 
|  | spin_lock(&vdev->priv_lock); | 
|  |  | 
|  | list_for_each_entry_safe(unlink, tmp, &vdev->unlink_tx, list) { | 
|  | pr_info("unlink cleanup tx %lu\n", unlink->unlink_seqnum); | 
|  | list_del(&unlink->list); | 
|  | kfree(unlink); | 
|  | } | 
|  |  | 
|  | while (!list_empty(&vdev->unlink_rx)) { | 
|  | struct urb *urb; | 
|  |  | 
|  | unlink = list_first_entry(&vdev->unlink_rx, struct vhci_unlink, | 
|  | list); | 
|  |  | 
|  | /* give back URB of unanswered unlink request */ | 
|  | pr_info("unlink cleanup rx %lu\n", unlink->unlink_seqnum); | 
|  |  | 
|  | urb = pickup_urb_and_free_priv(vdev, unlink->unlink_seqnum); | 
|  | if (!urb) { | 
|  | pr_info("the urb (seqnum %lu) was already given back\n", | 
|  | unlink->unlink_seqnum); | 
|  | list_del(&unlink->list); | 
|  | kfree(unlink); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | urb->status = -ENODEV; | 
|  |  | 
|  | usb_hcd_unlink_urb_from_ep(hcd, urb); | 
|  |  | 
|  | list_del(&unlink->list); | 
|  |  | 
|  | spin_unlock(&vdev->priv_lock); | 
|  | spin_unlock_irqrestore(&vhci->lock, flags); | 
|  |  | 
|  | usb_hcd_giveback_urb(hcd, urb, urb->status); | 
|  |  | 
|  | spin_lock_irqsave(&vhci->lock, flags); | 
|  | spin_lock(&vdev->priv_lock); | 
|  |  | 
|  | kfree(unlink); | 
|  | } | 
|  |  | 
|  | spin_unlock(&vdev->priv_lock); | 
|  | spin_unlock_irqrestore(&vhci->lock, flags); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * The important thing is that only one context begins cleanup. | 
|  | * This is why error handling and cleanup become simple. | 
|  | * We do not want to consider race condition as possible. | 
|  | */ | 
|  | static void vhci_shutdown_connection(struct usbip_device *ud) | 
|  | { | 
|  | struct vhci_device *vdev = container_of(ud, struct vhci_device, ud); | 
|  |  | 
|  | /* need this? see stub_dev.c */ | 
|  | if (ud->tcp_socket) { | 
|  | pr_debug("shutdown tcp_socket %p\n", ud->tcp_socket); | 
|  | kernel_sock_shutdown(ud->tcp_socket, SHUT_RDWR); | 
|  | } | 
|  |  | 
|  | /* kill threads related to this sdev */ | 
|  | if (vdev->ud.tcp_rx) { | 
|  | kthread_stop_put(vdev->ud.tcp_rx); | 
|  | vdev->ud.tcp_rx = NULL; | 
|  | } | 
|  | if (vdev->ud.tcp_tx) { | 
|  | kthread_stop_put(vdev->ud.tcp_tx); | 
|  | vdev->ud.tcp_tx = NULL; | 
|  | } | 
|  | pr_info("stop threads\n"); | 
|  |  | 
|  | /* active connection is closed */ | 
|  | if (vdev->ud.tcp_socket) { | 
|  | sockfd_put(vdev->ud.tcp_socket); | 
|  | vdev->ud.tcp_socket = NULL; | 
|  | } | 
|  | pr_info("release socket\n"); | 
|  |  | 
|  | vhci_device_unlink_cleanup(vdev); | 
|  |  | 
|  | /* | 
|  | * rh_port_disconnect() is a trigger of ... | 
|  | *   usb_disable_device(): | 
|  | *	disable all the endpoints for a USB device. | 
|  | *   usb_disable_endpoint(): | 
|  | *	disable endpoints. pending urbs are unlinked(dequeued). | 
|  | * | 
|  | * NOTE: After calling rh_port_disconnect(), the USB device drivers of a | 
|  | * detached device should release used urbs in a cleanup function (i.e. | 
|  | * xxx_disconnect()). Therefore, vhci_hcd does not need to release | 
|  | * pushed urbs and their private data in this function. | 
|  | * | 
|  | * NOTE: vhci_dequeue() must be considered carefully. When shutting down | 
|  | * a connection, vhci_shutdown_connection() expects vhci_dequeue() | 
|  | * gives back pushed urbs and frees their private data by request of | 
|  | * the cleanup function of a USB driver. When unlinking a urb with an | 
|  | * active connection, vhci_dequeue() does not give back the urb which | 
|  | * is actually given back by vhci_rx after receiving its return pdu. | 
|  | * | 
|  | */ | 
|  | rh_port_disconnect(vdev); | 
|  |  | 
|  | pr_info("disconnect device\n"); | 
|  | } | 
|  |  | 
|  | static void vhci_device_reset(struct usbip_device *ud) | 
|  | { | 
|  | struct vhci_device *vdev = container_of(ud, struct vhci_device, ud); | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&ud->lock, flags); | 
|  |  | 
|  | vdev->speed  = 0; | 
|  | vdev->devid  = 0; | 
|  |  | 
|  | usb_put_dev(vdev->udev); | 
|  | vdev->udev = NULL; | 
|  |  | 
|  | if (ud->tcp_socket) { | 
|  | sockfd_put(ud->tcp_socket); | 
|  | ud->tcp_socket = NULL; | 
|  | } | 
|  | ud->status = VDEV_ST_NULL; | 
|  |  | 
|  | spin_unlock_irqrestore(&ud->lock, flags); | 
|  | } | 
|  |  | 
|  | static void vhci_device_unusable(struct usbip_device *ud) | 
|  | { | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&ud->lock, flags); | 
|  | ud->status = VDEV_ST_ERROR; | 
|  | spin_unlock_irqrestore(&ud->lock, flags); | 
|  | } | 
|  |  | 
|  | static void vhci_device_init(struct vhci_device *vdev) | 
|  | { | 
|  | memset(vdev, 0, sizeof(struct vhci_device)); | 
|  |  | 
|  | vdev->ud.side   = USBIP_VHCI; | 
|  | vdev->ud.status = VDEV_ST_NULL; | 
|  | spin_lock_init(&vdev->ud.lock); | 
|  |  | 
|  | INIT_LIST_HEAD(&vdev->priv_rx); | 
|  | INIT_LIST_HEAD(&vdev->priv_tx); | 
|  | INIT_LIST_HEAD(&vdev->unlink_tx); | 
|  | INIT_LIST_HEAD(&vdev->unlink_rx); | 
|  | spin_lock_init(&vdev->priv_lock); | 
|  |  | 
|  | init_waitqueue_head(&vdev->waitq_tx); | 
|  |  | 
|  | vdev->ud.eh_ops.shutdown = vhci_shutdown_connection; | 
|  | vdev->ud.eh_ops.reset = vhci_device_reset; | 
|  | vdev->ud.eh_ops.unusable = vhci_device_unusable; | 
|  |  | 
|  | usbip_start_eh(&vdev->ud); | 
|  | } | 
|  |  | 
|  | static int hcd_name_to_id(const char *name) | 
|  | { | 
|  | char *c; | 
|  | long val; | 
|  | int ret; | 
|  |  | 
|  | c = strchr(name, '.'); | 
|  | if (c == NULL) | 
|  | return 0; | 
|  |  | 
|  | ret = kstrtol(c+1, 10, &val); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | return val; | 
|  | } | 
|  |  | 
|  | static int vhci_setup(struct usb_hcd *hcd) | 
|  | { | 
|  | struct vhci *vhci = *((void **)dev_get_platdata(hcd->self.controller)); | 
|  | if (usb_hcd_is_primary_hcd(hcd)) { | 
|  | vhci->vhci_hcd_hs = hcd_to_vhci_hcd(hcd); | 
|  | vhci->vhci_hcd_hs->vhci = vhci; | 
|  | /* | 
|  | * Mark the first roothub as being USB 2.0. | 
|  | * The USB 3.0 roothub will be registered later by | 
|  | * vhci_hcd_probe() | 
|  | */ | 
|  | hcd->speed = HCD_USB2; | 
|  | hcd->self.root_hub->speed = USB_SPEED_HIGH; | 
|  | } else { | 
|  | vhci->vhci_hcd_ss = hcd_to_vhci_hcd(hcd); | 
|  | vhci->vhci_hcd_ss->vhci = vhci; | 
|  | hcd->speed = HCD_USB3; | 
|  | hcd->self.root_hub->speed = USB_SPEED_SUPER; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int vhci_start(struct usb_hcd *hcd) | 
|  | { | 
|  | struct vhci_hcd *vhci_hcd = hcd_to_vhci_hcd(hcd); | 
|  | int id, rhport; | 
|  | int err; | 
|  |  | 
|  | usbip_dbg_vhci_hc("enter vhci_start\n"); | 
|  |  | 
|  | if (usb_hcd_is_primary_hcd(hcd)) | 
|  | spin_lock_init(&vhci_hcd->vhci->lock); | 
|  |  | 
|  | /* initialize private data of usb_hcd */ | 
|  |  | 
|  | for (rhport = 0; rhport < VHCI_HC_PORTS; rhport++) { | 
|  | struct vhci_device *vdev = &vhci_hcd->vdev[rhport]; | 
|  |  | 
|  | vhci_device_init(vdev); | 
|  | vdev->rhport = rhport; | 
|  | } | 
|  |  | 
|  | atomic_set(&vhci_hcd->seqnum, 0); | 
|  |  | 
|  | hcd->power_budget = 0; /* no limit */ | 
|  | hcd->uses_new_polling = 1; | 
|  |  | 
|  | #ifdef CONFIG_USB_OTG | 
|  | hcd->self.otg_port = 1; | 
|  | #endif | 
|  |  | 
|  | id = hcd_name_to_id(hcd_name(hcd)); | 
|  | if (id < 0) { | 
|  | pr_err("invalid vhci name %s\n", hcd_name(hcd)); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* vhci_hcd is now ready to be controlled through sysfs */ | 
|  | if (id == 0 && usb_hcd_is_primary_hcd(hcd)) { | 
|  | err = vhci_init_attr_group(); | 
|  | if (err) { | 
|  | pr_err("init attr group\n"); | 
|  | return err; | 
|  | } | 
|  | err = sysfs_create_group(&hcd_dev(hcd)->kobj, &vhci_attr_group); | 
|  | if (err) { | 
|  | pr_err("create sysfs files\n"); | 
|  | vhci_finish_attr_group(); | 
|  | return err; | 
|  | } | 
|  | pr_info("created sysfs %s\n", hcd_name(hcd)); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void vhci_stop(struct usb_hcd *hcd) | 
|  | { | 
|  | struct vhci_hcd *vhci_hcd = hcd_to_vhci_hcd(hcd); | 
|  | int id, rhport; | 
|  |  | 
|  | usbip_dbg_vhci_hc("stop VHCI controller\n"); | 
|  |  | 
|  | /* 1. remove the userland interface of vhci_hcd */ | 
|  | id = hcd_name_to_id(hcd_name(hcd)); | 
|  | if (id == 0 && usb_hcd_is_primary_hcd(hcd)) { | 
|  | sysfs_remove_group(&hcd_dev(hcd)->kobj, &vhci_attr_group); | 
|  | vhci_finish_attr_group(); | 
|  | } | 
|  |  | 
|  | /* 2. shutdown all the ports of vhci_hcd */ | 
|  | for (rhport = 0; rhport < VHCI_HC_PORTS; rhport++) { | 
|  | struct vhci_device *vdev = &vhci_hcd->vdev[rhport]; | 
|  |  | 
|  | usbip_event_add(&vdev->ud, VDEV_EVENT_REMOVED); | 
|  | usbip_stop_eh(&vdev->ud); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int vhci_get_frame_number(struct usb_hcd *hcd) | 
|  | { | 
|  | dev_err_ratelimited(&hcd->self.root_hub->dev, "Not yet implemented\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM | 
|  |  | 
|  | /* FIXME: suspend/resume */ | 
|  | static int vhci_bus_suspend(struct usb_hcd *hcd) | 
|  | { | 
|  | struct vhci *vhci = *((void **)dev_get_platdata(hcd->self.controller)); | 
|  | unsigned long flags; | 
|  |  | 
|  | dev_dbg(&hcd->self.root_hub->dev, "%s\n", __func__); | 
|  |  | 
|  | spin_lock_irqsave(&vhci->lock, flags); | 
|  | hcd->state = HC_STATE_SUSPENDED; | 
|  | spin_unlock_irqrestore(&vhci->lock, flags); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int vhci_bus_resume(struct usb_hcd *hcd) | 
|  | { | 
|  | struct vhci *vhci = *((void **)dev_get_platdata(hcd->self.controller)); | 
|  | int rc = 0; | 
|  | unsigned long flags; | 
|  |  | 
|  | dev_dbg(&hcd->self.root_hub->dev, "%s\n", __func__); | 
|  |  | 
|  | spin_lock_irqsave(&vhci->lock, flags); | 
|  | if (!HCD_HW_ACCESSIBLE(hcd)) | 
|  | rc = -ESHUTDOWN; | 
|  | else | 
|  | hcd->state = HC_STATE_RUNNING; | 
|  | spin_unlock_irqrestore(&vhci->lock, flags); | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | #else | 
|  |  | 
|  | #define vhci_bus_suspend      NULL | 
|  | #define vhci_bus_resume       NULL | 
|  | #endif | 
|  |  | 
|  | /* Change a group of bulk endpoints to support multiple stream IDs */ | 
|  | static int vhci_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev, | 
|  | struct usb_host_endpoint **eps, unsigned int num_eps, | 
|  | unsigned int num_streams, gfp_t mem_flags) | 
|  | { | 
|  | dev_dbg(&hcd->self.root_hub->dev, "vhci_alloc_streams not implemented\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Reverts a group of bulk endpoints back to not using stream IDs. */ | 
|  | static int vhci_free_streams(struct usb_hcd *hcd, struct usb_device *udev, | 
|  | struct usb_host_endpoint **eps, unsigned int num_eps, | 
|  | gfp_t mem_flags) | 
|  | { | 
|  | dev_dbg(&hcd->self.root_hub->dev, "vhci_free_streams not implemented\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct hc_driver vhci_hc_driver = { | 
|  | .description	= driver_name, | 
|  | .product_desc	= driver_desc, | 
|  | .hcd_priv_size	= sizeof(struct vhci_hcd), | 
|  |  | 
|  | .flags		= HCD_USB3 | HCD_SHARED, | 
|  |  | 
|  | .reset		= vhci_setup, | 
|  | .start		= vhci_start, | 
|  | .stop		= vhci_stop, | 
|  |  | 
|  | .urb_enqueue	= vhci_urb_enqueue, | 
|  | .urb_dequeue	= vhci_urb_dequeue, | 
|  |  | 
|  | .get_frame_number = vhci_get_frame_number, | 
|  |  | 
|  | .hub_status_data = vhci_hub_status, | 
|  | .hub_control    = vhci_hub_control, | 
|  | .bus_suspend	= vhci_bus_suspend, | 
|  | .bus_resume	= vhci_bus_resume, | 
|  |  | 
|  | .alloc_streams	= vhci_alloc_streams, | 
|  | .free_streams	= vhci_free_streams, | 
|  | }; | 
|  |  | 
|  | static int vhci_hcd_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct vhci             *vhci = *((void **)dev_get_platdata(&pdev->dev)); | 
|  | struct usb_hcd		*hcd_hs; | 
|  | struct usb_hcd		*hcd_ss; | 
|  | int			ret; | 
|  |  | 
|  | usbip_dbg_vhci_hc("name %s id %d\n", pdev->name, pdev->id); | 
|  |  | 
|  | /* | 
|  | * Allocate and initialize hcd. | 
|  | * Our private data is also allocated automatically. | 
|  | */ | 
|  | hcd_hs = usb_create_hcd(&vhci_hc_driver, &pdev->dev, dev_name(&pdev->dev)); | 
|  | if (!hcd_hs) { | 
|  | pr_err("create primary hcd failed\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  | hcd_hs->has_tt = 1; | 
|  |  | 
|  | /* | 
|  | * Finish generic HCD structure initialization and register. | 
|  | * Call the driver's reset() and start() routines. | 
|  | */ | 
|  | ret = usb_add_hcd(hcd_hs, 0, 0); | 
|  | if (ret != 0) { | 
|  | pr_err("usb_add_hcd hs failed %d\n", ret); | 
|  | goto put_usb2_hcd; | 
|  | } | 
|  |  | 
|  | hcd_ss = usb_create_shared_hcd(&vhci_hc_driver, &pdev->dev, | 
|  | dev_name(&pdev->dev), hcd_hs); | 
|  | if (!hcd_ss) { | 
|  | ret = -ENOMEM; | 
|  | pr_err("create shared hcd failed\n"); | 
|  | goto remove_usb2_hcd; | 
|  | } | 
|  |  | 
|  | ret = usb_add_hcd(hcd_ss, 0, 0); | 
|  | if (ret) { | 
|  | pr_err("usb_add_hcd ss failed %d\n", ret); | 
|  | goto put_usb3_hcd; | 
|  | } | 
|  |  | 
|  | usbip_dbg_vhci_hc("bye\n"); | 
|  | return 0; | 
|  |  | 
|  | put_usb3_hcd: | 
|  | usb_put_hcd(hcd_ss); | 
|  | remove_usb2_hcd: | 
|  | usb_remove_hcd(hcd_hs); | 
|  | put_usb2_hcd: | 
|  | usb_put_hcd(hcd_hs); | 
|  | vhci->vhci_hcd_hs = NULL; | 
|  | vhci->vhci_hcd_ss = NULL; | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int vhci_hcd_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct vhci *vhci = *((void **)dev_get_platdata(&pdev->dev)); | 
|  |  | 
|  | /* | 
|  | * Disconnects the root hub, | 
|  | * then reverses the effects of usb_add_hcd(), | 
|  | * invoking the HCD's stop() methods. | 
|  | */ | 
|  | usb_remove_hcd(vhci_hcd_to_hcd(vhci->vhci_hcd_ss)); | 
|  | usb_put_hcd(vhci_hcd_to_hcd(vhci->vhci_hcd_ss)); | 
|  |  | 
|  | usb_remove_hcd(vhci_hcd_to_hcd(vhci->vhci_hcd_hs)); | 
|  | usb_put_hcd(vhci_hcd_to_hcd(vhci->vhci_hcd_hs)); | 
|  |  | 
|  | vhci->vhci_hcd_hs = NULL; | 
|  | vhci->vhci_hcd_ss = NULL; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM | 
|  |  | 
|  | /* what should happen for USB/IP under suspend/resume? */ | 
|  | static int vhci_hcd_suspend(struct platform_device *pdev, pm_message_t state) | 
|  | { | 
|  | struct usb_hcd *hcd; | 
|  | struct vhci *vhci; | 
|  | int rhport; | 
|  | int connected = 0; | 
|  | int ret = 0; | 
|  | unsigned long flags; | 
|  |  | 
|  | dev_dbg(&pdev->dev, "%s\n", __func__); | 
|  |  | 
|  | hcd = platform_get_drvdata(pdev); | 
|  | if (!hcd) | 
|  | return 0; | 
|  |  | 
|  | vhci = *((void **)dev_get_platdata(hcd->self.controller)); | 
|  |  | 
|  | spin_lock_irqsave(&vhci->lock, flags); | 
|  |  | 
|  | for (rhport = 0; rhport < VHCI_HC_PORTS; rhport++) { | 
|  | if (vhci->vhci_hcd_hs->port_status[rhport] & | 
|  | USB_PORT_STAT_CONNECTION) | 
|  | connected += 1; | 
|  |  | 
|  | if (vhci->vhci_hcd_ss->port_status[rhport] & | 
|  | USB_PORT_STAT_CONNECTION) | 
|  | connected += 1; | 
|  | } | 
|  |  | 
|  | spin_unlock_irqrestore(&vhci->lock, flags); | 
|  |  | 
|  | if (connected > 0) { | 
|  | dev_info(&pdev->dev, | 
|  | "We have %d active connection%s. Do not suspend.\n", | 
|  | connected, (connected == 1 ? "" : "s")); | 
|  | ret =  -EBUSY; | 
|  | } else { | 
|  | dev_info(&pdev->dev, "suspend vhci_hcd"); | 
|  | clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int vhci_hcd_resume(struct platform_device *pdev) | 
|  | { | 
|  | struct usb_hcd *hcd; | 
|  |  | 
|  | dev_dbg(&pdev->dev, "%s\n", __func__); | 
|  |  | 
|  | hcd = platform_get_drvdata(pdev); | 
|  | if (!hcd) | 
|  | return 0; | 
|  | set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); | 
|  | usb_hcd_poll_rh_status(hcd); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #else | 
|  |  | 
|  | #define vhci_hcd_suspend	NULL | 
|  | #define vhci_hcd_resume		NULL | 
|  |  | 
|  | #endif | 
|  |  | 
|  | static struct platform_driver vhci_driver = { | 
|  | .probe	= vhci_hcd_probe, | 
|  | .remove	= vhci_hcd_remove, | 
|  | .suspend = vhci_hcd_suspend, | 
|  | .resume	= vhci_hcd_resume, | 
|  | .driver	= { | 
|  | .name = driver_name, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static void del_platform_devices(void) | 
|  | { | 
|  | struct platform_device *pdev; | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < vhci_num_controllers; i++) { | 
|  | pdev = vhcis[i].pdev; | 
|  | if (pdev != NULL) | 
|  | platform_device_unregister(pdev); | 
|  | vhcis[i].pdev = NULL; | 
|  | } | 
|  | sysfs_remove_link(&platform_bus.kobj, driver_name); | 
|  | } | 
|  |  | 
|  | static int __init vhci_hcd_init(void) | 
|  | { | 
|  | int i, ret; | 
|  |  | 
|  | if (usb_disabled()) | 
|  | return -ENODEV; | 
|  |  | 
|  | if (vhci_num_controllers < 1) | 
|  | vhci_num_controllers = 1; | 
|  |  | 
|  | vhcis = kcalloc(vhci_num_controllers, sizeof(struct vhci), GFP_KERNEL); | 
|  | if (vhcis == NULL) | 
|  | return -ENOMEM; | 
|  |  | 
|  | for (i = 0; i < vhci_num_controllers; i++) { | 
|  | vhcis[i].pdev = platform_device_alloc(driver_name, i); | 
|  | if (!vhcis[i].pdev) { | 
|  | i--; | 
|  | while (i >= 0) | 
|  | platform_device_put(vhcis[i--].pdev); | 
|  | ret = -ENOMEM; | 
|  | goto err_device_alloc; | 
|  | } | 
|  | } | 
|  | for (i = 0; i < vhci_num_controllers; i++) { | 
|  | void *vhci = &vhcis[i]; | 
|  | ret = platform_device_add_data(vhcis[i].pdev, &vhci, sizeof(void *)); | 
|  | if (ret) | 
|  | goto err_driver_register; | 
|  | } | 
|  |  | 
|  | ret = platform_driver_register(&vhci_driver); | 
|  | if (ret) | 
|  | goto err_driver_register; | 
|  |  | 
|  | for (i = 0; i < vhci_num_controllers; i++) { | 
|  | ret = platform_device_add(vhcis[i].pdev); | 
|  | if (ret < 0) { | 
|  | i--; | 
|  | while (i >= 0) | 
|  | platform_device_del(vhcis[i--].pdev); | 
|  | goto err_add_hcd; | 
|  | } | 
|  | } | 
|  |  | 
|  | return ret; | 
|  |  | 
|  | err_add_hcd: | 
|  | platform_driver_unregister(&vhci_driver); | 
|  | err_driver_register: | 
|  | for (i = 0; i < vhci_num_controllers; i++) | 
|  | platform_device_put(vhcis[i].pdev); | 
|  | err_device_alloc: | 
|  | kfree(vhcis); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void __exit vhci_hcd_exit(void) | 
|  | { | 
|  | del_platform_devices(); | 
|  | platform_driver_unregister(&vhci_driver); | 
|  | kfree(vhcis); | 
|  | } | 
|  |  | 
|  | module_init(vhci_hcd_init); | 
|  | module_exit(vhci_hcd_exit); | 
|  |  | 
|  | MODULE_AUTHOR(DRIVER_AUTHOR); | 
|  | MODULE_DESCRIPTION(DRIVER_DESC); | 
|  | MODULE_LICENSE("GPL"); |