| /****************************************************************************\ |
| * |
| * File Name atomfirmware.h |
| * Project This is an interface header file between atombios and OS GPU drivers for SoC15 products |
| * |
| * Description header file of general definitions for OS nd pre-OS video drivers |
| * |
| * Copyright 2014 Advanced Micro Devices, Inc. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy of this software |
| * and associated documentation files (the "Software"), to deal in the Software without restriction, |
| * including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, |
| * subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in all copies or substantial |
| * portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR |
| * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, |
| * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| * |
| \****************************************************************************/ |
| |
| /*IMPORTANT NOTES |
| * If a change in VBIOS/Driver/Tool's interface is only needed for SoC15 and forward products, then the change is only needed in this atomfirmware.h header file. |
| * If a change in VBIOS/Driver/Tool's interface is only needed for pre-SoC15 products, then the change is only needed in atombios.h header file. |
| * If a change is needed for both pre and post SoC15 products, then the change has to be made separately and might be differently in both atomfirmware.h and atombios.h. |
| */ |
| |
| #ifndef _ATOMFIRMWARE_H_ |
| #define _ATOMFIRMWARE_H_ |
| |
| enum atom_bios_header_version_def{ |
| ATOM_MAJOR_VERSION =0x0003, |
| ATOM_MINOR_VERSION =0x0003, |
| }; |
| |
| #ifdef _H2INC |
| #ifndef uint32_t |
| typedef unsigned long uint32_t; |
| #endif |
| |
| #ifndef uint16_t |
| typedef unsigned short uint16_t; |
| #endif |
| |
| #ifndef uint8_t |
| typedef unsigned char uint8_t; |
| #endif |
| #endif |
| |
| enum atom_crtc_def{ |
| ATOM_CRTC1 =0, |
| ATOM_CRTC2 =1, |
| ATOM_CRTC3 =2, |
| ATOM_CRTC4 =3, |
| ATOM_CRTC5 =4, |
| ATOM_CRTC6 =5, |
| ATOM_CRTC_INVALID =0xff, |
| }; |
| |
| enum atom_ppll_def{ |
| ATOM_PPLL0 =2, |
| ATOM_GCK_DFS =8, |
| ATOM_FCH_CLK =9, |
| ATOM_DP_DTO =11, |
| ATOM_COMBOPHY_PLL0 =20, |
| ATOM_COMBOPHY_PLL1 =21, |
| ATOM_COMBOPHY_PLL2 =22, |
| ATOM_COMBOPHY_PLL3 =23, |
| ATOM_COMBOPHY_PLL4 =24, |
| ATOM_COMBOPHY_PLL5 =25, |
| ATOM_PPLL_INVALID =0xff, |
| }; |
| |
| // define ASIC internal encoder id ( bit vector ), used for CRTC_SourceSel |
| enum atom_dig_def{ |
| ASIC_INT_DIG1_ENCODER_ID =0x03, |
| ASIC_INT_DIG2_ENCODER_ID =0x09, |
| ASIC_INT_DIG3_ENCODER_ID =0x0a, |
| ASIC_INT_DIG4_ENCODER_ID =0x0b, |
| ASIC_INT_DIG5_ENCODER_ID =0x0c, |
| ASIC_INT_DIG6_ENCODER_ID =0x0d, |
| ASIC_INT_DIG7_ENCODER_ID =0x0e, |
| }; |
| |
| //ucEncoderMode |
| enum atom_encode_mode_def |
| { |
| ATOM_ENCODER_MODE_DP =0, |
| ATOM_ENCODER_MODE_DP_SST =0, |
| ATOM_ENCODER_MODE_LVDS =1, |
| ATOM_ENCODER_MODE_DVI =2, |
| ATOM_ENCODER_MODE_HDMI =3, |
| ATOM_ENCODER_MODE_DP_AUDIO =5, |
| ATOM_ENCODER_MODE_DP_MST =5, |
| ATOM_ENCODER_MODE_CRT =15, |
| ATOM_ENCODER_MODE_DVO =16, |
| }; |
| |
| enum atom_encoder_refclk_src_def{ |
| ENCODER_REFCLK_SRC_P1PLL =0, |
| ENCODER_REFCLK_SRC_P2PLL =1, |
| ENCODER_REFCLK_SRC_P3PLL =2, |
| ENCODER_REFCLK_SRC_EXTCLK =3, |
| ENCODER_REFCLK_SRC_INVALID =0xff, |
| }; |
| |
| enum atom_scaler_def{ |
| ATOM_SCALER_DISABLE =0, /*scaler bypass mode, auto-center & no replication*/ |
| ATOM_SCALER_CENTER =1, //For Fudo, it's bypass and auto-center & auto replication |
| ATOM_SCALER_EXPANSION =2, /*scaler expansion by 2 tap alpha blending mode*/ |
| }; |
| |
| enum atom_operation_def{ |
| ATOM_DISABLE = 0, |
| ATOM_ENABLE = 1, |
| ATOM_INIT = 7, |
| ATOM_GET_STATUS = 8, |
| }; |
| |
| enum atom_embedded_display_op_def{ |
| ATOM_LCD_BL_OFF = 2, |
| ATOM_LCD_BL_OM = 3, |
| ATOM_LCD_BL_BRIGHTNESS_CONTROL = 4, |
| ATOM_LCD_SELFTEST_START = 5, |
| ATOM_LCD_SELFTEST_STOP = 6, |
| }; |
| |
| enum atom_spread_spectrum_mode{ |
| ATOM_SS_CENTER_OR_DOWN_MODE_MASK = 0x01, |
| ATOM_SS_DOWN_SPREAD_MODE = 0x00, |
| ATOM_SS_CENTRE_SPREAD_MODE = 0x01, |
| ATOM_INT_OR_EXT_SS_MASK = 0x02, |
| ATOM_INTERNAL_SS_MASK = 0x00, |
| ATOM_EXTERNAL_SS_MASK = 0x02, |
| }; |
| |
| /* define panel bit per color */ |
| enum atom_panel_bit_per_color{ |
| PANEL_BPC_UNDEFINE =0x00, |
| PANEL_6BIT_PER_COLOR =0x01, |
| PANEL_8BIT_PER_COLOR =0x02, |
| PANEL_10BIT_PER_COLOR =0x03, |
| PANEL_12BIT_PER_COLOR =0x04, |
| PANEL_16BIT_PER_COLOR =0x05, |
| }; |
| |
| //ucVoltageType |
| enum atom_voltage_type |
| { |
| VOLTAGE_TYPE_VDDC = 1, |
| VOLTAGE_TYPE_MVDDC = 2, |
| VOLTAGE_TYPE_MVDDQ = 3, |
| VOLTAGE_TYPE_VDDCI = 4, |
| VOLTAGE_TYPE_VDDGFX = 5, |
| VOLTAGE_TYPE_PCC = 6, |
| VOLTAGE_TYPE_MVPP = 7, |
| VOLTAGE_TYPE_LEDDPM = 8, |
| VOLTAGE_TYPE_PCC_MVDD = 9, |
| VOLTAGE_TYPE_PCIE_VDDC = 10, |
| VOLTAGE_TYPE_PCIE_VDDR = 11, |
| VOLTAGE_TYPE_GENERIC_I2C_1 = 0x11, |
| VOLTAGE_TYPE_GENERIC_I2C_2 = 0x12, |
| VOLTAGE_TYPE_GENERIC_I2C_3 = 0x13, |
| VOLTAGE_TYPE_GENERIC_I2C_4 = 0x14, |
| VOLTAGE_TYPE_GENERIC_I2C_5 = 0x15, |
| VOLTAGE_TYPE_GENERIC_I2C_6 = 0x16, |
| VOLTAGE_TYPE_GENERIC_I2C_7 = 0x17, |
| VOLTAGE_TYPE_GENERIC_I2C_8 = 0x18, |
| VOLTAGE_TYPE_GENERIC_I2C_9 = 0x19, |
| VOLTAGE_TYPE_GENERIC_I2C_10 = 0x1A, |
| }; |
| |
| enum atom_dgpu_vram_type{ |
| ATOM_DGPU_VRAM_TYPE_GDDR5 = 0x50, |
| ATOM_DGPU_VRAM_TYPE_HBM = 0x60, |
| }; |
| |
| enum atom_dp_vs_preemph_def{ |
| DP_VS_LEVEL0_PREEMPH_LEVEL0 = 0x00, |
| DP_VS_LEVEL1_PREEMPH_LEVEL0 = 0x01, |
| DP_VS_LEVEL2_PREEMPH_LEVEL0 = 0x02, |
| DP_VS_LEVEL3_PREEMPH_LEVEL0 = 0x03, |
| DP_VS_LEVEL0_PREEMPH_LEVEL1 = 0x08, |
| DP_VS_LEVEL1_PREEMPH_LEVEL1 = 0x09, |
| DP_VS_LEVEL2_PREEMPH_LEVEL1 = 0x0a, |
| DP_VS_LEVEL0_PREEMPH_LEVEL2 = 0x10, |
| DP_VS_LEVEL1_PREEMPH_LEVEL2 = 0x11, |
| DP_VS_LEVEL0_PREEMPH_LEVEL3 = 0x18, |
| }; |
| |
| |
| /* |
| enum atom_string_def{ |
| asic_bus_type_pcie_string = "PCI_EXPRESS", |
| atom_fire_gl_string = "FGL", |
| atom_bios_string = "ATOM" |
| }; |
| */ |
| |
| #pragma pack(1) /* BIOS data must use byte aligment*/ |
| |
| enum atombios_image_offset{ |
| OFFSET_TO_ATOM_ROM_HEADER_POINTER =0x00000048, |
| OFFSET_TO_ATOM_ROM_IMAGE_SIZE =0x00000002, |
| OFFSET_TO_ATOMBIOS_ASIC_BUS_MEM_TYPE =0x94, |
| MAXSIZE_OF_ATOMBIOS_ASIC_BUS_MEM_TYPE =20, /*including the terminator 0x0!*/ |
| OFFSET_TO_GET_ATOMBIOS_NUMBER_OF_STRINGS =0x2f, |
| OFFSET_TO_GET_ATOMBIOS_STRING_START =0x6e, |
| }; |
| |
| /**************************************************************************** |
| * Common header for all tables (Data table, Command function). |
| * Every table pointed in _ATOM_MASTER_DATA_TABLE has this common header. |
| * And the pointer actually points to this header. |
| ****************************************************************************/ |
| |
| struct atom_common_table_header |
| { |
| uint16_t structuresize; |
| uint8_t format_revision; //mainly used for a hw function, when the parser is not backward compatible |
| uint8_t content_revision; //change it when a data table has a structure change, or a hw function has a input/output parameter change |
| }; |
| |
| /**************************************************************************** |
| * Structure stores the ROM header. |
| ****************************************************************************/ |
| struct atom_rom_header_v2_2 |
| { |
| struct atom_common_table_header table_header; |
| uint8_t atom_bios_string[4]; //enum atom_string_def atom_bios_string; //Signature to distinguish between Atombios and non-atombios, |
| uint16_t bios_segment_address; |
| uint16_t protectedmodeoffset; |
| uint16_t configfilenameoffset; |
| uint16_t crc_block_offset; |
| uint16_t vbios_bootupmessageoffset; |
| uint16_t int10_offset; |
| uint16_t pcibusdevinitcode; |
| uint16_t iobaseaddress; |
| uint16_t subsystem_vendor_id; |
| uint16_t subsystem_id; |
| uint16_t pci_info_offset; |
| uint16_t masterhwfunction_offset; //Offest for SW to get all command function offsets, Don't change the position |
| uint16_t masterdatatable_offset; //Offest for SW to get all data table offsets, Don't change the position |
| uint16_t reserved; |
| uint32_t pspdirtableoffset; |
| }; |
| |
| /*==============================hw function portion======================================================================*/ |
| |
| |
| /**************************************************************************** |
| * Structures used in Command.mtb, each function name is not given here since those function could change from time to time |
| * The real functionality of each function is associated with the parameter structure version when defined |
| * For all internal cmd function definitions, please reference to atomstruct.h |
| ****************************************************************************/ |
| struct atom_master_list_of_command_functions_v2_1{ |
| uint16_t asic_init; //Function |
| uint16_t cmd_function1; //used as an internal one |
| uint16_t cmd_function2; //used as an internal one |
| uint16_t cmd_function3; //used as an internal one |
| uint16_t digxencodercontrol; //Function |
| uint16_t cmd_function5; //used as an internal one |
| uint16_t cmd_function6; //used as an internal one |
| uint16_t cmd_function7; //used as an internal one |
| uint16_t cmd_function8; //used as an internal one |
| uint16_t cmd_function9; //used as an internal one |
| uint16_t setengineclock; //Function |
| uint16_t setmemoryclock; //Function |
| uint16_t setpixelclock; //Function |
| uint16_t enabledisppowergating; //Function |
| uint16_t cmd_function14; //used as an internal one |
| uint16_t cmd_function15; //used as an internal one |
| uint16_t cmd_function16; //used as an internal one |
| uint16_t cmd_function17; //used as an internal one |
| uint16_t cmd_function18; //used as an internal one |
| uint16_t cmd_function19; //used as an internal one |
| uint16_t cmd_function20; //used as an internal one |
| uint16_t cmd_function21; //used as an internal one |
| uint16_t cmd_function22; //used as an internal one |
| uint16_t cmd_function23; //used as an internal one |
| uint16_t cmd_function24; //used as an internal one |
| uint16_t cmd_function25; //used as an internal one |
| uint16_t cmd_function26; //used as an internal one |
| uint16_t cmd_function27; //used as an internal one |
| uint16_t cmd_function28; //used as an internal one |
| uint16_t cmd_function29; //used as an internal one |
| uint16_t cmd_function30; //used as an internal one |
| uint16_t cmd_function31; //used as an internal one |
| uint16_t cmd_function32; //used as an internal one |
| uint16_t cmd_function33; //used as an internal one |
| uint16_t blankcrtc; //Function |
| uint16_t enablecrtc; //Function |
| uint16_t cmd_function36; //used as an internal one |
| uint16_t cmd_function37; //used as an internal one |
| uint16_t cmd_function38; //used as an internal one |
| uint16_t cmd_function39; //used as an internal one |
| uint16_t cmd_function40; //used as an internal one |
| uint16_t getsmuclockinfo; //Function |
| uint16_t selectcrtc_source; //Function |
| uint16_t cmd_function43; //used as an internal one |
| uint16_t cmd_function44; //used as an internal one |
| uint16_t cmd_function45; //used as an internal one |
| uint16_t setdceclock; //Function |
| uint16_t getmemoryclock; //Function |
| uint16_t getengineclock; //Function |
| uint16_t setcrtc_usingdtdtiming; //Function |
| uint16_t externalencodercontrol; //Function |
| uint16_t cmd_function51; //used as an internal one |
| uint16_t cmd_function52; //used as an internal one |
| uint16_t cmd_function53; //used as an internal one |
| uint16_t processi2cchanneltransaction;//Function |
| uint16_t cmd_function55; //used as an internal one |
| uint16_t cmd_function56; //used as an internal one |
| uint16_t cmd_function57; //used as an internal one |
| uint16_t cmd_function58; //used as an internal one |
| uint16_t cmd_function59; //used as an internal one |
| uint16_t computegpuclockparam; //Function |
| uint16_t cmd_function61; //used as an internal one |
| uint16_t cmd_function62; //used as an internal one |
| uint16_t dynamicmemorysettings; //Function function |
| uint16_t memorytraining; //Function function |
| uint16_t cmd_function65; //used as an internal one |
| uint16_t cmd_function66; //used as an internal one |
| uint16_t setvoltage; //Function |
| uint16_t cmd_function68; //used as an internal one |
| uint16_t readefusevalue; //Function |
| uint16_t cmd_function70; //used as an internal one |
| uint16_t cmd_function71; //used as an internal one |
| uint16_t cmd_function72; //used as an internal one |
| uint16_t cmd_function73; //used as an internal one |
| uint16_t cmd_function74; //used as an internal one |
| uint16_t cmd_function75; //used as an internal one |
| uint16_t dig1transmittercontrol; //Function |
| uint16_t cmd_function77; //used as an internal one |
| uint16_t processauxchanneltransaction;//Function |
| uint16_t cmd_function79; //used as an internal one |
| uint16_t getvoltageinfo; //Function |
| }; |
| |
| struct atom_master_command_function_v2_1 |
| { |
| struct atom_common_table_header table_header; |
| struct atom_master_list_of_command_functions_v2_1 listofcmdfunctions; |
| }; |
| |
| /**************************************************************************** |
| * Structures used in every command function |
| ****************************************************************************/ |
| struct atom_function_attribute |
| { |
| uint16_t ws_in_bytes:8; //[7:0]=Size of workspace in Bytes (in multiple of a dword), |
| uint16_t ps_in_bytes:7; //[14:8]=Size of parameter space in Bytes (multiple of a dword), |
| uint16_t updated_by_util:1; //[15]=flag to indicate the function is updated by util |
| }; |
| |
| |
| /**************************************************************************** |
| * Common header for all hw functions. |
| * Every function pointed by _master_list_of_hw_function has this common header. |
| * And the pointer actually points to this header. |
| ****************************************************************************/ |
| struct atom_rom_hw_function_header |
| { |
| struct atom_common_table_header func_header; |
| struct atom_function_attribute func_attrib; |
| }; |
| |
| |
| /*==============================sw data table portion======================================================================*/ |
| /**************************************************************************** |
| * Structures used in data.mtb, each data table name is not given here since those data table could change from time to time |
| * The real name of each table is given when its data structure version is defined |
| ****************************************************************************/ |
| struct atom_master_list_of_data_tables_v2_1{ |
| uint16_t utilitypipeline; /* Offest for the utility to get parser info,Don't change this position!*/ |
| uint16_t multimedia_info; |
| uint16_t smc_dpm_info; |
| uint16_t sw_datatable3; |
| uint16_t firmwareinfo; /* Shared by various SW components */ |
| uint16_t sw_datatable5; |
| uint16_t lcd_info; /* Shared by various SW components */ |
| uint16_t sw_datatable7; |
| uint16_t smu_info; |
| uint16_t sw_datatable9; |
| uint16_t sw_datatable10; |
| uint16_t vram_usagebyfirmware; /* Shared by various SW components */ |
| uint16_t gpio_pin_lut; /* Shared by various SW components */ |
| uint16_t sw_datatable13; |
| uint16_t gfx_info; |
| uint16_t powerplayinfo; /* Shared by various SW components */ |
| uint16_t sw_datatable16; |
| uint16_t sw_datatable17; |
| uint16_t sw_datatable18; |
| uint16_t sw_datatable19; |
| uint16_t sw_datatable20; |
| uint16_t sw_datatable21; |
| uint16_t displayobjectinfo; /* Shared by various SW components */ |
| uint16_t indirectioaccess; /* used as an internal one */ |
| uint16_t umc_info; /* Shared by various SW components */ |
| uint16_t sw_datatable25; |
| uint16_t sw_datatable26; |
| uint16_t dce_info; /* Shared by various SW components */ |
| uint16_t vram_info; /* Shared by various SW components */ |
| uint16_t sw_datatable29; |
| uint16_t integratedsysteminfo; /* Shared by various SW components */ |
| uint16_t asic_profiling_info; /* Shared by various SW components */ |
| uint16_t voltageobject_info; /* shared by various SW components */ |
| uint16_t sw_datatable33; |
| uint16_t sw_datatable34; |
| }; |
| |
| |
| struct atom_master_data_table_v2_1 |
| { |
| struct atom_common_table_header table_header; |
| struct atom_master_list_of_data_tables_v2_1 listOfdatatables; |
| }; |
| |
| |
| struct atom_dtd_format |
| { |
| uint16_t pixclk; |
| uint16_t h_active; |
| uint16_t h_blanking_time; |
| uint16_t v_active; |
| uint16_t v_blanking_time; |
| uint16_t h_sync_offset; |
| uint16_t h_sync_width; |
| uint16_t v_sync_offset; |
| uint16_t v_syncwidth; |
| uint16_t reserved; |
| uint16_t reserved0; |
| uint8_t h_border; |
| uint8_t v_border; |
| uint16_t miscinfo; |
| uint8_t atom_mode_id; |
| uint8_t refreshrate; |
| }; |
| |
| /* atom_dtd_format.modemiscinfo defintion */ |
| enum atom_dtd_format_modemiscinfo{ |
| ATOM_HSYNC_POLARITY = 0x0002, |
| ATOM_VSYNC_POLARITY = 0x0004, |
| ATOM_H_REPLICATIONBY2 = 0x0010, |
| ATOM_V_REPLICATIONBY2 = 0x0020, |
| ATOM_INTERLACE = 0x0080, |
| ATOM_COMPOSITESYNC = 0x0040, |
| }; |
| |
| |
| /* utilitypipeline |
| * when format_revision==1 && content_revision==1, then this an info table for atomworks to use during debug session, no structure is associated with it. |
| * the location of it can't change |
| */ |
| |
| |
| /* |
| *************************************************************************** |
| Data Table firmwareinfo structure |
| *************************************************************************** |
| */ |
| |
| struct atom_firmware_info_v3_1 |
| { |
| struct atom_common_table_header table_header; |
| uint32_t firmware_revision; |
| uint32_t bootup_sclk_in10khz; |
| uint32_t bootup_mclk_in10khz; |
| uint32_t firmware_capability; // enum atombios_firmware_capability |
| uint32_t main_call_parser_entry; /* direct address of main parser call in VBIOS binary. */ |
| uint32_t bios_scratch_reg_startaddr; // 1st bios scratch register dword address |
| uint16_t bootup_vddc_mv; |
| uint16_t bootup_vddci_mv; |
| uint16_t bootup_mvddc_mv; |
| uint16_t bootup_vddgfx_mv; |
| uint8_t mem_module_id; |
| uint8_t coolingsolution_id; /*0: Air cooling; 1: Liquid cooling ... */ |
| uint8_t reserved1[2]; |
| uint32_t mc_baseaddr_high; |
| uint32_t mc_baseaddr_low; |
| uint32_t reserved2[6]; |
| }; |
| |
| /* Total 32bit cap indication */ |
| enum atombios_firmware_capability |
| { |
| ATOM_FIRMWARE_CAP_FIRMWARE_POSTED = 0x00000001, |
| ATOM_FIRMWARE_CAP_GPU_VIRTUALIZATION = 0x00000002, |
| ATOM_FIRMWARE_CAP_WMI_SUPPORT = 0x00000040, |
| }; |
| |
| enum atom_cooling_solution_id{ |
| AIR_COOLING = 0x00, |
| LIQUID_COOLING = 0x01 |
| }; |
| |
| struct atom_firmware_info_v3_2 { |
| struct atom_common_table_header table_header; |
| uint32_t firmware_revision; |
| uint32_t bootup_sclk_in10khz; |
| uint32_t bootup_mclk_in10khz; |
| uint32_t firmware_capability; // enum atombios_firmware_capability |
| uint32_t main_call_parser_entry; /* direct address of main parser call in VBIOS binary. */ |
| uint32_t bios_scratch_reg_startaddr; // 1st bios scratch register dword address |
| uint16_t bootup_vddc_mv; |
| uint16_t bootup_vddci_mv; |
| uint16_t bootup_mvddc_mv; |
| uint16_t bootup_vddgfx_mv; |
| uint8_t mem_module_id; |
| uint8_t coolingsolution_id; /*0: Air cooling; 1: Liquid cooling ... */ |
| uint8_t reserved1[2]; |
| uint32_t mc_baseaddr_high; |
| uint32_t mc_baseaddr_low; |
| uint8_t board_i2c_feature_id; // enum of atom_board_i2c_feature_id_def |
| uint8_t board_i2c_feature_gpio_id; // i2c id find in gpio_lut data table gpio_id |
| uint8_t board_i2c_feature_slave_addr; |
| uint8_t reserved3; |
| uint16_t bootup_mvddq_mv; |
| uint16_t bootup_mvpp_mv; |
| uint32_t zfbstartaddrin16mb; |
| uint32_t reserved2[3]; |
| }; |
| |
| /* |
| *************************************************************************** |
| Data Table lcd_info structure |
| *************************************************************************** |
| */ |
| |
| struct lcd_info_v2_1 |
| { |
| struct atom_common_table_header table_header; |
| struct atom_dtd_format lcd_timing; |
| uint16_t backlight_pwm; |
| uint16_t special_handle_cap; |
| uint16_t panel_misc; |
| uint16_t lvds_max_slink_pclk; |
| uint16_t lvds_ss_percentage; |
| uint16_t lvds_ss_rate_10hz; |
| uint8_t pwr_on_digon_to_de; /*all pwr sequence numbers below are in uint of 4ms*/ |
| uint8_t pwr_on_de_to_vary_bl; |
| uint8_t pwr_down_vary_bloff_to_de; |
| uint8_t pwr_down_de_to_digoff; |
| uint8_t pwr_off_delay; |
| uint8_t pwr_on_vary_bl_to_blon; |
| uint8_t pwr_down_bloff_to_vary_bloff; |
| uint8_t panel_bpc; |
| uint8_t dpcd_edp_config_cap; |
| uint8_t dpcd_max_link_rate; |
| uint8_t dpcd_max_lane_count; |
| uint8_t dpcd_max_downspread; |
| uint8_t min_allowed_bl_level; |
| uint8_t max_allowed_bl_level; |
| uint8_t bootup_bl_level; |
| uint8_t dplvdsrxid; |
| uint32_t reserved1[8]; |
| }; |
| |
| /* lcd_info_v2_1.panel_misc defintion */ |
| enum atom_lcd_info_panel_misc{ |
| ATOM_PANEL_MISC_FPDI =0x0002, |
| }; |
| |
| //uceDPToLVDSRxId |
| enum atom_lcd_info_dptolvds_rx_id |
| { |
| eDP_TO_LVDS_RX_DISABLE = 0x00, // no eDP->LVDS translator chip |
| eDP_TO_LVDS_COMMON_ID = 0x01, // common eDP->LVDS translator chip without AMD SW init |
| eDP_TO_LVDS_REALTEK_ID = 0x02, // Realtek tansaltor which require AMD SW init |
| }; |
| |
| |
| /* |
| *************************************************************************** |
| Data Table gpio_pin_lut structure |
| *************************************************************************** |
| */ |
| |
| struct atom_gpio_pin_assignment |
| { |
| uint32_t data_a_reg_index; |
| uint8_t gpio_bitshift; |
| uint8_t gpio_mask_bitshift; |
| uint8_t gpio_id; |
| uint8_t reserved; |
| }; |
| |
| /* atom_gpio_pin_assignment.gpio_id definition */ |
| enum atom_gpio_pin_assignment_gpio_id { |
| I2C_HW_LANE_MUX =0x0f, /* only valid when bit7=1 */ |
| I2C_HW_ENGINE_ID_MASK =0x70, /* only valid when bit7=1 */ |
| I2C_HW_CAP =0x80, /*only when the I2C_HW_CAP is set, the pin ID is assigned to an I2C pin pair, otherwise, it's an generic GPIO pin */ |
| |
| /* gpio_id pre-define id for multiple usage */ |
| /* GPIO use to control PCIE_VDDC in certain SLT board */ |
| PCIE_VDDC_CONTROL_GPIO_PINID = 56, |
| /* if PP_AC_DC_SWITCH_GPIO_PINID in Gpio_Pin_LutTable, AC/DC swithing feature is enable */ |
| PP_AC_DC_SWITCH_GPIO_PINID = 60, |
| /* VDDC_REGULATOR_VRHOT_GPIO_PINID in Gpio_Pin_LutTable, VRHot feature is enable */ |
| VDDC_VRHOT_GPIO_PINID = 61, |
| /*if VDDC_PCC_GPIO_PINID in GPIO_LUTable, Peak Current Control feature is enabled */ |
| VDDC_PCC_GPIO_PINID = 62, |
| /* Only used on certain SLT/PA board to allow utility to cut Efuse. */ |
| EFUSE_CUT_ENABLE_GPIO_PINID = 63, |
| /* ucGPIO=DRAM_SELF_REFRESH_GPIO_PIND uses for memory self refresh (ucGPIO=0, DRAM self-refresh; ucGPIO= */ |
| DRAM_SELF_REFRESH_GPIO_PINID = 64, |
| /* Thermal interrupt output->system thermal chip GPIO pin */ |
| THERMAL_INT_OUTPUT_GPIO_PINID =65, |
| }; |
| |
| |
| struct atom_gpio_pin_lut_v2_1 |
| { |
| struct atom_common_table_header table_header; |
| /*the real number of this included in the structure is calcualted by using the (whole structure size - the header size)/size of atom_gpio_pin_lut */ |
| struct atom_gpio_pin_assignment gpio_pin[8]; |
| }; |
| |
| |
| /* |
| *************************************************************************** |
| Data Table vram_usagebyfirmware structure |
| *************************************************************************** |
| */ |
| |
| struct vram_usagebyfirmware_v2_1 |
| { |
| struct atom_common_table_header table_header; |
| uint32_t start_address_in_kb; |
| uint16_t used_by_firmware_in_kb; |
| uint16_t used_by_driver_in_kb; |
| }; |
| |
| |
| /* |
| *************************************************************************** |
| Data Table displayobjectinfo structure |
| *************************************************************************** |
| */ |
| |
| enum atom_object_record_type_id |
| { |
| ATOM_I2C_RECORD_TYPE =1, |
| ATOM_HPD_INT_RECORD_TYPE =2, |
| ATOM_OBJECT_GPIO_CNTL_RECORD_TYPE =9, |
| ATOM_CONNECTOR_HPDPIN_LUT_RECORD_TYPE =16, |
| ATOM_CONNECTOR_AUXDDC_LUT_RECORD_TYPE =17, |
| ATOM_ENCODER_CAP_RECORD_TYPE=20, |
| ATOM_BRACKET_LAYOUT_RECORD_TYPE=21, |
| ATOM_CONNECTOR_FORCED_TMDS_CAP_RECORD_TYPE=22, |
| ATOM_RECORD_END_TYPE =0xFF, |
| }; |
| |
| struct atom_common_record_header |
| { |
| uint8_t record_type; //An emun to indicate the record type |
| uint8_t record_size; //The size of the whole record in byte |
| }; |
| |
| struct atom_i2c_record |
| { |
| struct atom_common_record_header record_header; //record_type = ATOM_I2C_RECORD_TYPE |
| uint8_t i2c_id; |
| uint8_t i2c_slave_addr; //The slave address, it's 0 when the record is attached to connector for DDC |
| }; |
| |
| struct atom_hpd_int_record |
| { |
| struct atom_common_record_header record_header; //record_type = ATOM_HPD_INT_RECORD_TYPE |
| uint8_t pin_id; //Corresponding block in GPIO_PIN_INFO table gives the pin info |
| uint8_t plugin_pin_state; |
| }; |
| |
| // Bit maps for ATOM_ENCODER_CAP_RECORD.usEncoderCap |
| enum atom_encoder_caps_def |
| { |
| ATOM_ENCODER_CAP_RECORD_HBR2 =0x01, // DP1.2 HBR2 is supported by HW encoder, it is retired in NI. the real meaning from SI is MST_EN |
| ATOM_ENCODER_CAP_RECORD_MST_EN =0x01, // from SI, this bit means DP MST is enable or not. |
| ATOM_ENCODER_CAP_RECORD_HBR2_EN =0x02, // DP1.2 HBR2 setting is qualified and HBR2 can be enabled |
| ATOM_ENCODER_CAP_RECORD_HDMI6Gbps_EN =0x04, // HDMI2.0 6Gbps enable or not. |
| ATOM_ENCODER_CAP_RECORD_HBR3_EN =0x08, // DP1.3 HBR3 is supported by board. |
| }; |
| |
| struct atom_encoder_caps_record |
| { |
| struct atom_common_record_header record_header; //record_type = ATOM_ENCODER_CAP_RECORD_TYPE |
| uint32_t encodercaps; |
| }; |
| |
| enum atom_connector_caps_def |
| { |
| ATOM_CONNECTOR_CAP_INTERNAL_DISPLAY = 0x01, //a cap bit to indicate that this non-embedded display connector is an internal display |
| ATOM_CONNECTOR_CAP_INTERNAL_DISPLAY_BL = 0x02, //a cap bit to indicate that this internal display requires BL control from GPU, refers to lcd_info for BL PWM freq |
| }; |
| |
| struct atom_disp_connector_caps_record |
| { |
| struct atom_common_record_header record_header; |
| uint32_t connectcaps; |
| }; |
| |
| //The following generic object gpio pin control record type will replace JTAG_RECORD/FPGA_CONTROL_RECORD/DVI_EXT_INPUT_RECORD above gradually |
| struct atom_gpio_pin_control_pair |
| { |
| uint8_t gpio_id; // GPIO_ID, find the corresponding ID in GPIO_LUT table |
| uint8_t gpio_pinstate; // Pin state showing how to set-up the pin |
| }; |
| |
| struct atom_object_gpio_cntl_record |
| { |
| struct atom_common_record_header record_header; |
| uint8_t flag; // Future expnadibility |
| uint8_t number_of_pins; // Number of GPIO pins used to control the object |
| struct atom_gpio_pin_control_pair gpio[1]; // the real gpio pin pair determined by number of pins ucNumberOfPins |
| }; |
| |
| //Definitions for GPIO pin state |
| enum atom_gpio_pin_control_pinstate_def |
| { |
| GPIO_PIN_TYPE_INPUT = 0x00, |
| GPIO_PIN_TYPE_OUTPUT = 0x10, |
| GPIO_PIN_TYPE_HW_CONTROL = 0x20, |
| |
| //For GPIO_PIN_TYPE_OUTPUT the following is defined |
| GPIO_PIN_OUTPUT_STATE_MASK = 0x01, |
| GPIO_PIN_OUTPUT_STATE_SHIFT = 0, |
| GPIO_PIN_STATE_ACTIVE_LOW = 0x0, |
| GPIO_PIN_STATE_ACTIVE_HIGH = 0x1, |
| }; |
| |
| // Indexes to GPIO array in GLSync record |
| // GLSync record is for Frame Lock/Gen Lock feature. |
| enum atom_glsync_record_gpio_index_def |
| { |
| ATOM_GPIO_INDEX_GLSYNC_REFCLK = 0, |
| ATOM_GPIO_INDEX_GLSYNC_HSYNC = 1, |
| ATOM_GPIO_INDEX_GLSYNC_VSYNC = 2, |
| ATOM_GPIO_INDEX_GLSYNC_SWAP_REQ = 3, |
| ATOM_GPIO_INDEX_GLSYNC_SWAP_GNT = 4, |
| ATOM_GPIO_INDEX_GLSYNC_INTERRUPT = 5, |
| ATOM_GPIO_INDEX_GLSYNC_V_RESET = 6, |
| ATOM_GPIO_INDEX_GLSYNC_SWAP_CNTL = 7, |
| ATOM_GPIO_INDEX_GLSYNC_SWAP_SEL = 8, |
| ATOM_GPIO_INDEX_GLSYNC_MAX = 9, |
| }; |
| |
| |
| struct atom_connector_hpdpin_lut_record //record for ATOM_CONNECTOR_HPDPIN_LUT_RECORD_TYPE |
| { |
| struct atom_common_record_header record_header; |
| uint8_t hpd_pin_map[8]; |
| }; |
| |
| struct atom_connector_auxddc_lut_record //record for ATOM_CONNECTOR_AUXDDC_LUT_RECORD_TYPE |
| { |
| struct atom_common_record_header record_header; |
| uint8_t aux_ddc_map[8]; |
| }; |
| |
| struct atom_connector_forced_tmds_cap_record |
| { |
| struct atom_common_record_header record_header; |
| // override TMDS capability on this connector when it operate in TMDS mode. usMaxTmdsClkRate = max TMDS Clock in Mhz/2.5 |
| uint8_t maxtmdsclkrate_in2_5mhz; |
| uint8_t reserved; |
| }; |
| |
| struct atom_connector_layout_info |
| { |
| uint16_t connectorobjid; |
| uint8_t connector_type; |
| uint8_t position; |
| }; |
| |
| // define ATOM_CONNECTOR_LAYOUT_INFO.ucConnectorType to describe the display connector size |
| enum atom_connector_layout_info_connector_type_def |
| { |
| CONNECTOR_TYPE_DVI_D = 1, |
| |
| CONNECTOR_TYPE_HDMI = 4, |
| CONNECTOR_TYPE_DISPLAY_PORT = 5, |
| CONNECTOR_TYPE_MINI_DISPLAY_PORT = 6, |
| }; |
| |
| struct atom_bracket_layout_record |
| { |
| struct atom_common_record_header record_header; |
| uint8_t bracketlen; |
| uint8_t bracketwidth; |
| uint8_t conn_num; |
| uint8_t reserved; |
| struct atom_connector_layout_info conn_info[1]; |
| }; |
| |
| enum atom_display_device_tag_def{ |
| ATOM_DISPLAY_LCD1_SUPPORT = 0x0002, //an embedded display is either an LVDS or eDP signal type of display |
| ATOM_DISPLAY_DFP1_SUPPORT = 0x0008, |
| ATOM_DISPLAY_DFP2_SUPPORT = 0x0080, |
| ATOM_DISPLAY_DFP3_SUPPORT = 0x0200, |
| ATOM_DISPLAY_DFP4_SUPPORT = 0x0400, |
| ATOM_DISPLAY_DFP5_SUPPORT = 0x0800, |
| ATOM_DISPLAY_DFP6_SUPPORT = 0x0040, |
| ATOM_DISPLAY_DFPx_SUPPORT = 0x0ec8, |
| }; |
| |
| struct atom_display_object_path_v2 |
| { |
| uint16_t display_objid; //Connector Object ID or Misc Object ID |
| uint16_t disp_recordoffset; |
| uint16_t encoderobjid; //first encoder closer to the connector, could be either an external or intenal encoder |
| uint16_t extencoderobjid; //2nd encoder after the first encoder, from the connector point of view; |
| uint16_t encoder_recordoffset; |
| uint16_t extencoder_recordoffset; |
| uint16_t device_tag; //a supported device vector, each display path starts with this.the paths are enumerated in the way of priority, a path appears first |
| uint8_t priority_id; |
| uint8_t reserved; |
| }; |
| |
| struct display_object_info_table_v1_4 |
| { |
| struct atom_common_table_header table_header; |
| uint16_t supporteddevices; |
| uint8_t number_of_path; |
| uint8_t reserved; |
| struct atom_display_object_path_v2 display_path[8]; //the real number of this included in the structure is calculated by using the (whole structure size - the header size- number_of_path)/size of atom_display_object_path |
| }; |
| |
| |
| /* |
| *************************************************************************** |
| Data Table dce_info structure |
| *************************************************************************** |
| */ |
| struct atom_display_controller_info_v4_1 |
| { |
| struct atom_common_table_header table_header; |
| uint32_t display_caps; |
| uint32_t bootup_dispclk_10khz; |
| uint16_t dce_refclk_10khz; |
| uint16_t i2c_engine_refclk_10khz; |
| uint16_t dvi_ss_percentage; // in unit of 0.001% |
| uint16_t dvi_ss_rate_10hz; |
| uint16_t hdmi_ss_percentage; // in unit of 0.001% |
| uint16_t hdmi_ss_rate_10hz; |
| uint16_t dp_ss_percentage; // in unit of 0.001% |
| uint16_t dp_ss_rate_10hz; |
| uint8_t dvi_ss_mode; // enum of atom_spread_spectrum_mode |
| uint8_t hdmi_ss_mode; // enum of atom_spread_spectrum_mode |
| uint8_t dp_ss_mode; // enum of atom_spread_spectrum_mode |
| uint8_t ss_reserved; |
| uint8_t hardcode_mode_num; // a hardcode mode number defined in StandardVESA_TimingTable when a CRT or DFP EDID is not available |
| uint8_t reserved1[3]; |
| uint16_t dpphy_refclk_10khz; |
| uint16_t reserved2; |
| uint8_t dceip_min_ver; |
| uint8_t dceip_max_ver; |
| uint8_t max_disp_pipe_num; |
| uint8_t max_vbios_active_disp_pipe_num; |
| uint8_t max_ppll_num; |
| uint8_t max_disp_phy_num; |
| uint8_t max_aux_pairs; |
| uint8_t remotedisplayconfig; |
| uint8_t reserved3[8]; |
| }; |
| |
| |
| struct atom_display_controller_info_v4_2 |
| { |
| struct atom_common_table_header table_header; |
| uint32_t display_caps; |
| uint32_t bootup_dispclk_10khz; |
| uint16_t dce_refclk_10khz; |
| uint16_t i2c_engine_refclk_10khz; |
| uint16_t dvi_ss_percentage; // in unit of 0.001% |
| uint16_t dvi_ss_rate_10hz; |
| uint16_t hdmi_ss_percentage; // in unit of 0.001% |
| uint16_t hdmi_ss_rate_10hz; |
| uint16_t dp_ss_percentage; // in unit of 0.001% |
| uint16_t dp_ss_rate_10hz; |
| uint8_t dvi_ss_mode; // enum of atom_spread_spectrum_mode |
| uint8_t hdmi_ss_mode; // enum of atom_spread_spectrum_mode |
| uint8_t dp_ss_mode; // enum of atom_spread_spectrum_mode |
| uint8_t ss_reserved; |
| uint8_t dfp_hardcode_mode_num; // DFP hardcode mode number defined in StandardVESA_TimingTable when EDID is not available |
| uint8_t dfp_hardcode_refreshrate;// DFP hardcode mode refreshrate defined in StandardVESA_TimingTable when EDID is not available |
| uint8_t vga_hardcode_mode_num; // VGA hardcode mode number defined in StandardVESA_TimingTable when EDID is not avablable |
| uint8_t vga_hardcode_refreshrate;// VGA hardcode mode number defined in StandardVESA_TimingTable when EDID is not avablable |
| uint16_t dpphy_refclk_10khz; |
| uint16_t reserved2; |
| uint8_t dcnip_min_ver; |
| uint8_t dcnip_max_ver; |
| uint8_t max_disp_pipe_num; |
| uint8_t max_vbios_active_disp_pipe_num; |
| uint8_t max_ppll_num; |
| uint8_t max_disp_phy_num; |
| uint8_t max_aux_pairs; |
| uint8_t remotedisplayconfig; |
| uint8_t reserved3[8]; |
| }; |
| |
| |
| enum dce_info_caps_def |
| { |
| // only for VBIOS |
| DCE_INFO_CAPS_FORCE_DISPDEV_CONNECTED =0x02, |
| // only for VBIOS |
| DCE_INFO_CAPS_DISABLE_DFP_DP_HBR2 =0x04, |
| // only for VBIOS |
| DCE_INFO_CAPS_ENABLE_INTERLAC_TIMING =0x08, |
| |
| }; |
| |
| /* |
| *************************************************************************** |
| Data Table ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO structure |
| *************************************************************************** |
| */ |
| struct atom_ext_display_path |
| { |
| uint16_t device_tag; //A bit vector to show what devices are supported |
| uint16_t device_acpi_enum; //16bit device ACPI id. |
| uint16_t connectorobjid; //A physical connector for displays to plug in, using object connector definitions |
| uint8_t auxddclut_index; //An index into external AUX/DDC channel LUT |
| uint8_t hpdlut_index; //An index into external HPD pin LUT |
| uint16_t ext_encoder_objid; //external encoder object id |
| uint8_t channelmapping; // if ucChannelMapping=0, using default one to one mapping |
| uint8_t chpninvert; // bit vector for up to 8 lanes, =0: P and N is not invert, =1 P and N is inverted |
| uint16_t caps; |
| uint16_t reserved; |
| }; |
| |
| //usCaps |
| enum ext_display_path_cap_def |
| { |
| EXT_DISPLAY_PATH_CAPS__HBR2_DISABLE =0x0001, |
| EXT_DISPLAY_PATH_CAPS__DP_FIXED_VS_EN =0x0002, |
| EXT_DISPLAY_PATH_CAPS__EXT_CHIP_MASK =0x007C, |
| }; |
| |
| struct atom_external_display_connection_info |
| { |
| struct atom_common_table_header table_header; |
| uint8_t guid[16]; // a GUID is a 16 byte long string |
| struct atom_ext_display_path path[7]; // total of fixed 7 entries. |
| uint8_t checksum; // a simple Checksum of the sum of whole structure equal to 0x0. |
| uint8_t stereopinid; // use for eDP panel |
| uint8_t remotedisplayconfig; |
| uint8_t edptolvdsrxid; |
| uint8_t fixdpvoltageswing; // usCaps[1]=1, this indicate DP_LANE_SET value |
| uint8_t reserved[3]; // for potential expansion |
| }; |
| |
| /* |
| *************************************************************************** |
| Data Table integratedsysteminfo structure |
| *************************************************************************** |
| */ |
| |
| struct atom_camera_dphy_timing_param |
| { |
| uint8_t profile_id; // SENSOR_PROFILES |
| uint32_t param; |
| }; |
| |
| struct atom_camera_dphy_elec_param |
| { |
| uint16_t param[3]; |
| }; |
| |
| struct atom_camera_module_info |
| { |
| uint8_t module_id; // 0: Rear, 1: Front right of user, 2: Front left of user |
| uint8_t module_name[8]; |
| struct atom_camera_dphy_timing_param timingparam[6]; // Exact number is under estimation and confirmation from sensor vendor |
| }; |
| |
| struct atom_camera_flashlight_info |
| { |
| uint8_t flashlight_id; // 0: Rear, 1: Front |
| uint8_t name[8]; |
| }; |
| |
| struct atom_camera_data |
| { |
| uint32_t versionCode; |
| struct atom_camera_module_info cameraInfo[3]; // Assuming 3 camera sensors max |
| struct atom_camera_flashlight_info flashInfo; // Assuming 1 flashlight max |
| struct atom_camera_dphy_elec_param dphy_param; |
| uint32_t crc_val; // CRC |
| }; |
| |
| |
| struct atom_14nm_dpphy_dvihdmi_tuningset |
| { |
| uint32_t max_symclk_in10khz; |
| uint8_t encoder_mode; //atom_encode_mode_def, =2: DVI, =3: HDMI mode |
| uint8_t phy_sel; //bit vector of phy, bit0= phya, bit1=phyb, ....bit5 = phyf |
| uint16_t margindeemph; //COMMON_MAR_DEEMPH_NOM[7:0]tx_margin_nom [15:8]deemph_gen1_nom |
| uint8_t deemph_6db_4; //COMMON_SELDEEMPH60[31:24]deemph_6db_4 |
| uint8_t boostadj; //CMD_BUS_GLOBAL_FOR_TX_LANE0 [19:16]tx_boost_adj [20]tx_boost_en [23:22]tx_binary_ron_code_offset |
| uint8_t tx_driver_fifty_ohms; //COMMON_ZCALCODE_CTRL[21].tx_driver_fifty_ohms |
| uint8_t deemph_sel; //MARGIN_DEEMPH_LANE0.DEEMPH_SEL |
| }; |
| |
| struct atom_14nm_dpphy_dp_setting{ |
| uint8_t dp_vs_pemph_level; //enum of atom_dp_vs_preemph_def |
| uint16_t margindeemph; //COMMON_MAR_DEEMPH_NOM[7:0]tx_margin_nom [15:8]deemph_gen1_nom |
| uint8_t deemph_6db_4; //COMMON_SELDEEMPH60[31:24]deemph_6db_4 |
| uint8_t boostadj; //CMD_BUS_GLOBAL_FOR_TX_LANE0 [19:16]tx_boost_adj [20]tx_boost_en [23:22]tx_binary_ron_code_offset |
| }; |
| |
| struct atom_14nm_dpphy_dp_tuningset{ |
| uint8_t phy_sel; // bit vector of phy, bit0= phya, bit1=phyb, ....bit5 = phyf |
| uint8_t version; |
| uint16_t table_size; // size of atom_14nm_dpphy_dp_tuningset |
| uint16_t reserved; |
| struct atom_14nm_dpphy_dp_setting dptuning[10]; |
| }; |
| |
| struct atom_14nm_dig_transmitter_info_header_v4_0{ |
| struct atom_common_table_header table_header; |
| uint16_t pcie_phy_tmds_hdmi_macro_settings_offset; // offset of PCIEPhyTMDSHDMIMacroSettingsTbl |
| uint16_t uniphy_vs_emph_lookup_table_offset; // offset of UniphyVSEmphLookUpTbl |
| uint16_t uniphy_xbar_settings_table_offset; // offset of UniphyXbarSettingsTbl |
| }; |
| |
| struct atom_14nm_combphy_tmds_vs_set |
| { |
| uint8_t sym_clk; |
| uint8_t dig_mode; |
| uint8_t phy_sel; |
| uint16_t common_mar_deemph_nom__margin_deemph_val; |
| uint8_t common_seldeemph60__deemph_6db_4_val; |
| uint8_t cmd_bus_global_for_tx_lane0__boostadj_val ; |
| uint8_t common_zcalcode_ctrl__tx_driver_fifty_ohms_val; |
| uint8_t margin_deemph_lane0__deemph_sel_val; |
| }; |
| |
| struct atom_i2c_reg_info { |
| uint8_t ucI2cRegIndex; |
| uint8_t ucI2cRegVal; |
| }; |
| |
| struct atom_hdmi_retimer_redriver_set { |
| uint8_t HdmiSlvAddr; |
| uint8_t HdmiRegNum; |
| uint8_t Hdmi6GRegNum; |
| struct atom_i2c_reg_info HdmiRegSetting[9]; //For non 6G Hz use |
| struct atom_i2c_reg_info Hdmi6GhzRegSetting[3]; //For 6G Hz use. |
| }; |
| |
| struct atom_integrated_system_info_v1_11 |
| { |
| struct atom_common_table_header table_header; |
| uint32_t vbios_misc; //enum of atom_system_vbiosmisc_def |
| uint32_t gpucapinfo; //enum of atom_system_gpucapinf_def |
| uint32_t system_config; |
| uint32_t cpucapinfo; |
| uint16_t gpuclk_ss_percentage; //unit of 0.001%, 1000 mean 1% |
| uint16_t gpuclk_ss_type; |
| uint16_t lvds_ss_percentage; //unit of 0.001%, 1000 mean 1% |
| uint16_t lvds_ss_rate_10hz; |
| uint16_t hdmi_ss_percentage; //unit of 0.001%, 1000 mean 1% |
| uint16_t hdmi_ss_rate_10hz; |
| uint16_t dvi_ss_percentage; //unit of 0.001%, 1000 mean 1% |
| uint16_t dvi_ss_rate_10hz; |
| uint16_t dpphy_override; // bit vector, enum of atom_sysinfo_dpphy_override_def |
| uint16_t lvds_misc; // enum of atom_sys_info_lvds_misc_def |
| uint16_t backlight_pwm_hz; // pwm frequency in hz |
| uint8_t memorytype; // enum of atom_sys_mem_type |
| uint8_t umachannelnumber; // number of memory channels |
| uint8_t pwr_on_digon_to_de; /* all pwr sequence numbers below are in uint of 4ms */ |
| uint8_t pwr_on_de_to_vary_bl; |
| uint8_t pwr_down_vary_bloff_to_de; |
| uint8_t pwr_down_de_to_digoff; |
| uint8_t pwr_off_delay; |
| uint8_t pwr_on_vary_bl_to_blon; |
| uint8_t pwr_down_bloff_to_vary_bloff; |
| uint8_t min_allowed_bl_level; |
| struct atom_external_display_connection_info extdispconninfo; |
| struct atom_14nm_dpphy_dvihdmi_tuningset dvi_tuningset; |
| struct atom_14nm_dpphy_dvihdmi_tuningset hdmi_tuningset; |
| struct atom_14nm_dpphy_dvihdmi_tuningset hdmi6g_tuningset; |
| struct atom_14nm_dpphy_dp_tuningset dp_tuningset; |
| struct atom_14nm_dpphy_dp_tuningset dp_hbr3_tuningset; |
| struct atom_camera_data camera_info; |
| struct atom_hdmi_retimer_redriver_set dp0_retimer_set; //for DP0 |
| struct atom_hdmi_retimer_redriver_set dp1_retimer_set; //for DP1 |
| struct atom_hdmi_retimer_redriver_set dp2_retimer_set; //for DP2 |
| struct atom_hdmi_retimer_redriver_set dp3_retimer_set; //for DP3 |
| uint32_t reserved[108]; |
| }; |
| |
| |
| // system_config |
| enum atom_system_vbiosmisc_def{ |
| INTEGRATED_SYSTEM_INFO__GET_EDID_CALLBACK_FUNC_SUPPORT = 0x01, |
| }; |
| |
| |
| // gpucapinfo |
| enum atom_system_gpucapinf_def{ |
| SYS_INFO_GPUCAPS__ENABEL_DFS_BYPASS = 0x10, |
| }; |
| |
| //dpphy_override |
| enum atom_sysinfo_dpphy_override_def{ |
| ATOM_ENABLE_DVI_TUNINGSET = 0x01, |
| ATOM_ENABLE_HDMI_TUNINGSET = 0x02, |
| ATOM_ENABLE_HDMI6G_TUNINGSET = 0x04, |
| ATOM_ENABLE_DP_TUNINGSET = 0x08, |
| ATOM_ENABLE_DP_HBR3_TUNINGSET = 0x10, |
| }; |
| |
| //lvds_misc |
| enum atom_sys_info_lvds_misc_def |
| { |
| SYS_INFO_LVDS_MISC_888_FPDI_MODE =0x01, |
| SYS_INFO_LVDS_MISC_888_BPC_MODE =0x04, |
| SYS_INFO_LVDS_MISC_OVERRIDE_EN =0x08, |
| }; |
| |
| |
| //memorytype DMI Type 17 offset 12h - Memory Type |
| enum atom_dmi_t17_mem_type_def{ |
| OtherMemType = 0x01, ///< Assign 01 to Other |
| UnknownMemType, ///< Assign 02 to Unknown |
| DramMemType, ///< Assign 03 to DRAM |
| EdramMemType, ///< Assign 04 to EDRAM |
| VramMemType, ///< Assign 05 to VRAM |
| SramMemType, ///< Assign 06 to SRAM |
| RamMemType, ///< Assign 07 to RAM |
| RomMemType, ///< Assign 08 to ROM |
| FlashMemType, ///< Assign 09 to Flash |
| EepromMemType, ///< Assign 10 to EEPROM |
| FepromMemType, ///< Assign 11 to FEPROM |
| EpromMemType, ///< Assign 12 to EPROM |
| CdramMemType, ///< Assign 13 to CDRAM |
| ThreeDramMemType, ///< Assign 14 to 3DRAM |
| SdramMemType, ///< Assign 15 to SDRAM |
| SgramMemType, ///< Assign 16 to SGRAM |
| RdramMemType, ///< Assign 17 to RDRAM |
| DdrMemType, ///< Assign 18 to DDR |
| Ddr2MemType, ///< Assign 19 to DDR2 |
| Ddr2FbdimmMemType, ///< Assign 20 to DDR2 FB-DIMM |
| Ddr3MemType = 0x18, ///< Assign 24 to DDR3 |
| Fbd2MemType, ///< Assign 25 to FBD2 |
| Ddr4MemType, ///< Assign 26 to DDR4 |
| LpDdrMemType, ///< Assign 27 to LPDDR |
| LpDdr2MemType, ///< Assign 28 to LPDDR2 |
| LpDdr3MemType, ///< Assign 29 to LPDDR3 |
| LpDdr4MemType, ///< Assign 30 to LPDDR4 |
| }; |
| |
| |
| // this Table is used starting from NL/AM, used by SBIOS and pass the IntegratedSystemInfoTable/PowerPlayInfoTable/SystemCameraInfoTable |
| struct atom_fusion_system_info_v4 |
| { |
| struct atom_integrated_system_info_v1_11 sysinfo; // refer to ATOM_INTEGRATED_SYSTEM_INFO_V1_8 definition |
| uint32_t powerplayinfo[256]; // Reserve 1024 bytes space for PowerPlayInfoTable |
| }; |
| |
| |
| /* |
| *************************************************************************** |
| Data Table gfx_info structure |
| *************************************************************************** |
| */ |
| |
| struct atom_gfx_info_v2_2 |
| { |
| struct atom_common_table_header table_header; |
| uint8_t gfxip_min_ver; |
| uint8_t gfxip_max_ver; |
| uint8_t max_shader_engines; |
| uint8_t max_tile_pipes; |
| uint8_t max_cu_per_sh; |
| uint8_t max_sh_per_se; |
| uint8_t max_backends_per_se; |
| uint8_t max_texture_channel_caches; |
| uint32_t regaddr_cp_dma_src_addr; |
| uint32_t regaddr_cp_dma_src_addr_hi; |
| uint32_t regaddr_cp_dma_dst_addr; |
| uint32_t regaddr_cp_dma_dst_addr_hi; |
| uint32_t regaddr_cp_dma_command; |
| uint32_t regaddr_cp_status; |
| uint32_t regaddr_rlc_gpu_clock_32; |
| uint32_t rlc_gpu_timer_refclk; |
| }; |
| |
| struct atom_gfx_info_v2_3 { |
| struct atom_common_table_header table_header; |
| uint8_t gfxip_min_ver; |
| uint8_t gfxip_max_ver; |
| uint8_t max_shader_engines; |
| uint8_t max_tile_pipes; |
| uint8_t max_cu_per_sh; |
| uint8_t max_sh_per_se; |
| uint8_t max_backends_per_se; |
| uint8_t max_texture_channel_caches; |
| uint32_t regaddr_cp_dma_src_addr; |
| uint32_t regaddr_cp_dma_src_addr_hi; |
| uint32_t regaddr_cp_dma_dst_addr; |
| uint32_t regaddr_cp_dma_dst_addr_hi; |
| uint32_t regaddr_cp_dma_command; |
| uint32_t regaddr_cp_status; |
| uint32_t regaddr_rlc_gpu_clock_32; |
| uint32_t rlc_gpu_timer_refclk; |
| uint8_t active_cu_per_sh; |
| uint8_t active_rb_per_se; |
| uint16_t gcgoldenoffset; |
| uint32_t rm21_sram_vmin_value; |
| }; |
| |
| struct atom_gfx_info_v2_4 { |
| struct atom_common_table_header table_header; |
| uint8_t gfxip_min_ver; |
| uint8_t gfxip_max_ver; |
| uint8_t gc_num_se; |
| uint8_t max_tile_pipes; |
| uint8_t gc_num_cu_per_sh; |
| uint8_t gc_num_sh_per_se; |
| uint8_t gc_num_rb_per_se; |
| uint8_t gc_num_tccs; |
| uint32_t regaddr_cp_dma_src_addr; |
| uint32_t regaddr_cp_dma_src_addr_hi; |
| uint32_t regaddr_cp_dma_dst_addr; |
| uint32_t regaddr_cp_dma_dst_addr_hi; |
| uint32_t regaddr_cp_dma_command; |
| uint32_t regaddr_cp_status; |
| uint32_t regaddr_rlc_gpu_clock_32; |
| uint32_t rlc_gpu_timer_refclk; |
| uint8_t active_cu_per_sh; |
| uint8_t active_rb_per_se; |
| uint16_t gcgoldenoffset; |
| uint16_t gc_num_gprs; |
| uint16_t gc_gsprim_buff_depth; |
| uint16_t gc_parameter_cache_depth; |
| uint16_t gc_wave_size; |
| uint16_t gc_max_waves_per_simd; |
| uint16_t gc_lds_size; |
| uint8_t gc_num_max_gs_thds; |
| uint8_t gc_gs_table_depth; |
| uint8_t gc_double_offchip_lds_buffer; |
| uint8_t gc_max_scratch_slots_per_cu; |
| uint32_t sram_rm_fuses_val; |
| uint32_t sram_custom_rm_fuses_val; |
| }; |
| |
| /* |
| *************************************************************************** |
| Data Table smu_info structure |
| *************************************************************************** |
| */ |
| struct atom_smu_info_v3_1 |
| { |
| struct atom_common_table_header table_header; |
| uint8_t smuip_min_ver; |
| uint8_t smuip_max_ver; |
| uint8_t smu_rsd1; |
| uint8_t gpuclk_ss_mode; // enum of atom_spread_spectrum_mode |
| uint16_t sclk_ss_percentage; |
| uint16_t sclk_ss_rate_10hz; |
| uint16_t gpuclk_ss_percentage; // in unit of 0.001% |
| uint16_t gpuclk_ss_rate_10hz; |
| uint32_t core_refclk_10khz; |
| uint8_t ac_dc_gpio_bit; // GPIO bit shift in SMU_GPIOPAD_A configured for AC/DC switching, =0xff means invalid |
| uint8_t ac_dc_polarity; // GPIO polarity for AC/DC switching |
| uint8_t vr0hot_gpio_bit; // GPIO bit shift in SMU_GPIOPAD_A configured for VR0 HOT event, =0xff means invalid |
| uint8_t vr0hot_polarity; // GPIO polarity for VR0 HOT event |
| uint8_t vr1hot_gpio_bit; // GPIO bit shift in SMU_GPIOPAD_A configured for VR1 HOT event , =0xff means invalid |
| uint8_t vr1hot_polarity; // GPIO polarity for VR1 HOT event |
| uint8_t fw_ctf_gpio_bit; // GPIO bit shift in SMU_GPIOPAD_A configured for CTF, =0xff means invalid |
| uint8_t fw_ctf_polarity; // GPIO polarity for CTF |
| }; |
| |
| struct atom_smu_info_v3_2 { |
| struct atom_common_table_header table_header; |
| uint8_t smuip_min_ver; |
| uint8_t smuip_max_ver; |
| uint8_t smu_rsd1; |
| uint8_t gpuclk_ss_mode; |
| uint16_t sclk_ss_percentage; |
| uint16_t sclk_ss_rate_10hz; |
| uint16_t gpuclk_ss_percentage; // in unit of 0.001% |
| uint16_t gpuclk_ss_rate_10hz; |
| uint32_t core_refclk_10khz; |
| uint8_t ac_dc_gpio_bit; // GPIO bit shift in SMU_GPIOPAD_A configured for AC/DC switching, =0xff means invalid |
| uint8_t ac_dc_polarity; // GPIO polarity for AC/DC switching |
| uint8_t vr0hot_gpio_bit; // GPIO bit shift in SMU_GPIOPAD_A configured for VR0 HOT event, =0xff means invalid |
| uint8_t vr0hot_polarity; // GPIO polarity for VR0 HOT event |
| uint8_t vr1hot_gpio_bit; // GPIO bit shift in SMU_GPIOPAD_A configured for VR1 HOT event , =0xff means invalid |
| uint8_t vr1hot_polarity; // GPIO polarity for VR1 HOT event |
| uint8_t fw_ctf_gpio_bit; // GPIO bit shift in SMU_GPIOPAD_A configured for CTF, =0xff means invalid |
| uint8_t fw_ctf_polarity; // GPIO polarity for CTF |
| uint8_t pcc_gpio_bit; // GPIO bit shift in SMU_GPIOPAD_A configured for PCC, =0xff means invalid |
| uint8_t pcc_gpio_polarity; // GPIO polarity for CTF |
| uint16_t smugoldenoffset; |
| uint32_t gpupll_vco_freq_10khz; |
| uint32_t bootup_smnclk_10khz; |
| uint32_t bootup_socclk_10khz; |
| uint32_t bootup_mp0clk_10khz; |
| uint32_t bootup_mp1clk_10khz; |
| uint32_t bootup_lclk_10khz; |
| uint32_t bootup_dcefclk_10khz; |
| uint32_t ctf_threshold_override_value; |
| uint32_t reserved[5]; |
| }; |
| |
| struct atom_smu_info_v3_3 { |
| struct atom_common_table_header table_header; |
| uint8_t smuip_min_ver; |
| uint8_t smuip_max_ver; |
| uint8_t smu_rsd1; |
| uint8_t gpuclk_ss_mode; |
| uint16_t sclk_ss_percentage; |
| uint16_t sclk_ss_rate_10hz; |
| uint16_t gpuclk_ss_percentage; // in unit of 0.001% |
| uint16_t gpuclk_ss_rate_10hz; |
| uint32_t core_refclk_10khz; |
| uint8_t ac_dc_gpio_bit; // GPIO bit shift in SMU_GPIOPAD_A configured for AC/DC switching, =0xff means invalid |
| uint8_t ac_dc_polarity; // GPIO polarity for AC/DC switching |
| uint8_t vr0hot_gpio_bit; // GPIO bit shift in SMU_GPIOPAD_A configured for VR0 HOT event, =0xff means invalid |
| uint8_t vr0hot_polarity; // GPIO polarity for VR0 HOT event |
| uint8_t vr1hot_gpio_bit; // GPIO bit shift in SMU_GPIOPAD_A configured for VR1 HOT event , =0xff means invalid |
| uint8_t vr1hot_polarity; // GPIO polarity for VR1 HOT event |
| uint8_t fw_ctf_gpio_bit; // GPIO bit shift in SMU_GPIOPAD_A configured for CTF, =0xff means invalid |
| uint8_t fw_ctf_polarity; // GPIO polarity for CTF |
| uint8_t pcc_gpio_bit; // GPIO bit shift in SMU_GPIOPAD_A configured for PCC, =0xff means invalid |
| uint8_t pcc_gpio_polarity; // GPIO polarity for CTF |
| uint16_t smugoldenoffset; |
| uint32_t gpupll_vco_freq_10khz; |
| uint32_t bootup_smnclk_10khz; |
| uint32_t bootup_socclk_10khz; |
| uint32_t bootup_mp0clk_10khz; |
| uint32_t bootup_mp1clk_10khz; |
| uint32_t bootup_lclk_10khz; |
| uint32_t bootup_dcefclk_10khz; |
| uint32_t ctf_threshold_override_value; |
| uint32_t syspll3_0_vco_freq_10khz; |
| uint32_t syspll3_1_vco_freq_10khz; |
| uint32_t bootup_fclk_10khz; |
| uint32_t bootup_waflclk_10khz; |
| uint32_t reserved[3]; |
| }; |
| |
| /* |
| *************************************************************************** |
| Data Table smc_dpm_info structure |
| *************************************************************************** |
| */ |
| struct atom_smc_dpm_info_v4_1 |
| { |
| struct atom_common_table_header table_header; |
| uint8_t liquid1_i2c_address; |
| uint8_t liquid2_i2c_address; |
| uint8_t vr_i2c_address; |
| uint8_t plx_i2c_address; |
| |
| uint8_t liquid_i2c_linescl; |
| uint8_t liquid_i2c_linesda; |
| uint8_t vr_i2c_linescl; |
| uint8_t vr_i2c_linesda; |
| |
| uint8_t plx_i2c_linescl; |
| uint8_t plx_i2c_linesda; |
| uint8_t vrsensorpresent; |
| uint8_t liquidsensorpresent; |
| |
| uint16_t maxvoltagestepgfx; |
| uint16_t maxvoltagestepsoc; |
| |
| uint8_t vddgfxvrmapping; |
| uint8_t vddsocvrmapping; |
| uint8_t vddmem0vrmapping; |
| uint8_t vddmem1vrmapping; |
| |
| uint8_t gfxulvphasesheddingmask; |
| uint8_t soculvphasesheddingmask; |
| uint8_t padding8_v[2]; |
| |
| uint16_t gfxmaxcurrent; |
| uint8_t gfxoffset; |
| uint8_t padding_telemetrygfx; |
| |
| uint16_t socmaxcurrent; |
| uint8_t socoffset; |
| uint8_t padding_telemetrysoc; |
| |
| uint16_t mem0maxcurrent; |
| uint8_t mem0offset; |
| uint8_t padding_telemetrymem0; |
| |
| uint16_t mem1maxcurrent; |
| uint8_t mem1offset; |
| uint8_t padding_telemetrymem1; |
| |
| uint8_t acdcgpio; |
| uint8_t acdcpolarity; |
| uint8_t vr0hotgpio; |
| uint8_t vr0hotpolarity; |
| |
| uint8_t vr1hotgpio; |
| uint8_t vr1hotpolarity; |
| uint8_t padding1; |
| uint8_t padding2; |
| |
| uint8_t ledpin0; |
| uint8_t ledpin1; |
| uint8_t ledpin2; |
| uint8_t padding8_4; |
| |
| uint8_t pllgfxclkspreadenabled; |
| uint8_t pllgfxclkspreadpercent; |
| uint16_t pllgfxclkspreadfreq; |
| |
| uint8_t uclkspreadenabled; |
| uint8_t uclkspreadpercent; |
| uint16_t uclkspreadfreq; |
| |
| uint8_t socclkspreadenabled; |
| uint8_t socclkspreadpercent; |
| uint16_t socclkspreadfreq; |
| |
| uint8_t acggfxclkspreadenabled; |
| uint8_t acggfxclkspreadpercent; |
| uint16_t acggfxclkspreadfreq; |
| |
| uint32_t boardreserved[10]; |
| }; |
| |
| /* |
| *************************************************************************** |
| Data Table asic_profiling_info structure |
| *************************************************************************** |
| */ |
| struct atom_asic_profiling_info_v4_1 |
| { |
| struct atom_common_table_header table_header; |
| uint32_t maxvddc; |
| uint32_t minvddc; |
| uint32_t avfs_meannsigma_acontant0; |
| uint32_t avfs_meannsigma_acontant1; |
| uint32_t avfs_meannsigma_acontant2; |
| uint16_t avfs_meannsigma_dc_tol_sigma; |
| uint16_t avfs_meannsigma_platform_mean; |
| uint16_t avfs_meannsigma_platform_sigma; |
| uint32_t gb_vdroop_table_cksoff_a0; |
| uint32_t gb_vdroop_table_cksoff_a1; |
| uint32_t gb_vdroop_table_cksoff_a2; |
| uint32_t gb_vdroop_table_ckson_a0; |
| uint32_t gb_vdroop_table_ckson_a1; |
| uint32_t gb_vdroop_table_ckson_a2; |
| uint32_t avfsgb_fuse_table_cksoff_m1; |
| uint32_t avfsgb_fuse_table_cksoff_m2; |
| uint32_t avfsgb_fuse_table_cksoff_b; |
| uint32_t avfsgb_fuse_table_ckson_m1; |
| uint32_t avfsgb_fuse_table_ckson_m2; |
| uint32_t avfsgb_fuse_table_ckson_b; |
| uint16_t max_voltage_0_25mv; |
| uint8_t enable_gb_vdroop_table_cksoff; |
| uint8_t enable_gb_vdroop_table_ckson; |
| uint8_t enable_gb_fuse_table_cksoff; |
| uint8_t enable_gb_fuse_table_ckson; |
| uint16_t psm_age_comfactor; |
| uint8_t enable_apply_avfs_cksoff_voltage; |
| uint8_t reserved; |
| uint32_t dispclk2gfxclk_a; |
| uint32_t dispclk2gfxclk_b; |
| uint32_t dispclk2gfxclk_c; |
| uint32_t pixclk2gfxclk_a; |
| uint32_t pixclk2gfxclk_b; |
| uint32_t pixclk2gfxclk_c; |
| uint32_t dcefclk2gfxclk_a; |
| uint32_t dcefclk2gfxclk_b; |
| uint32_t dcefclk2gfxclk_c; |
| uint32_t phyclk2gfxclk_a; |
| uint32_t phyclk2gfxclk_b; |
| uint32_t phyclk2gfxclk_c; |
| }; |
| |
| struct atom_asic_profiling_info_v4_2 { |
| struct atom_common_table_header table_header; |
| uint32_t maxvddc; |
| uint32_t minvddc; |
| uint32_t avfs_meannsigma_acontant0; |
| uint32_t avfs_meannsigma_acontant1; |
| uint32_t avfs_meannsigma_acontant2; |
| uint16_t avfs_meannsigma_dc_tol_sigma; |
| uint16_t avfs_meannsigma_platform_mean; |
| uint16_t avfs_meannsigma_platform_sigma; |
| uint32_t gb_vdroop_table_cksoff_a0; |
| uint32_t gb_vdroop_table_cksoff_a1; |
| uint32_t gb_vdroop_table_cksoff_a2; |
| uint32_t gb_vdroop_table_ckson_a0; |
| uint32_t gb_vdroop_table_ckson_a1; |
| uint32_t gb_vdroop_table_ckson_a2; |
| uint32_t avfsgb_fuse_table_cksoff_m1; |
| uint32_t avfsgb_fuse_table_cksoff_m2; |
| uint32_t avfsgb_fuse_table_cksoff_b; |
| uint32_t avfsgb_fuse_table_ckson_m1; |
| uint32_t avfsgb_fuse_table_ckson_m2; |
| uint32_t avfsgb_fuse_table_ckson_b; |
| uint16_t max_voltage_0_25mv; |
| uint8_t enable_gb_vdroop_table_cksoff; |
| uint8_t enable_gb_vdroop_table_ckson; |
| uint8_t enable_gb_fuse_table_cksoff; |
| uint8_t enable_gb_fuse_table_ckson; |
| uint16_t psm_age_comfactor; |
| uint8_t enable_apply_avfs_cksoff_voltage; |
| uint8_t reserved; |
| uint32_t dispclk2gfxclk_a; |
| uint32_t dispclk2gfxclk_b; |
| uint32_t dispclk2gfxclk_c; |
| uint32_t pixclk2gfxclk_a; |
| uint32_t pixclk2gfxclk_b; |
| uint32_t pixclk2gfxclk_c; |
| uint32_t dcefclk2gfxclk_a; |
| uint32_t dcefclk2gfxclk_b; |
| uint32_t dcefclk2gfxclk_c; |
| uint32_t phyclk2gfxclk_a; |
| uint32_t phyclk2gfxclk_b; |
| uint32_t phyclk2gfxclk_c; |
| uint32_t acg_gb_vdroop_table_a0; |
| uint32_t acg_gb_vdroop_table_a1; |
| uint32_t acg_gb_vdroop_table_a2; |
| uint32_t acg_avfsgb_fuse_table_m1; |
| uint32_t acg_avfsgb_fuse_table_m2; |
| uint32_t acg_avfsgb_fuse_table_b; |
| uint8_t enable_acg_gb_vdroop_table; |
| uint8_t enable_acg_gb_fuse_table; |
| uint32_t acg_dispclk2gfxclk_a; |
| uint32_t acg_dispclk2gfxclk_b; |
| uint32_t acg_dispclk2gfxclk_c; |
| uint32_t acg_pixclk2gfxclk_a; |
| uint32_t acg_pixclk2gfxclk_b; |
| uint32_t acg_pixclk2gfxclk_c; |
| uint32_t acg_dcefclk2gfxclk_a; |
| uint32_t acg_dcefclk2gfxclk_b; |
| uint32_t acg_dcefclk2gfxclk_c; |
| uint32_t acg_phyclk2gfxclk_a; |
| uint32_t acg_phyclk2gfxclk_b; |
| uint32_t acg_phyclk2gfxclk_c; |
| }; |
| |
| /* |
| *************************************************************************** |
| Data Table multimedia_info structure |
| *************************************************************************** |
| */ |
| struct atom_multimedia_info_v2_1 |
| { |
| struct atom_common_table_header table_header; |
| uint8_t uvdip_min_ver; |
| uint8_t uvdip_max_ver; |
| uint8_t vceip_min_ver; |
| uint8_t vceip_max_ver; |
| uint16_t uvd_enc_max_input_width_pixels; |
| uint16_t uvd_enc_max_input_height_pixels; |
| uint16_t vce_enc_max_input_width_pixels; |
| uint16_t vce_enc_max_input_height_pixels; |
| uint32_t uvd_enc_max_bandwidth; // 16x16 pixels/sec, codec independent |
| uint32_t vce_enc_max_bandwidth; // 16x16 pixels/sec, codec independent |
| }; |
| |
| |
| /* |
| *************************************************************************** |
| Data Table umc_info structure |
| *************************************************************************** |
| */ |
| struct atom_umc_info_v3_1 |
| { |
| struct atom_common_table_header table_header; |
| uint32_t ucode_version; |
| uint32_t ucode_rom_startaddr; |
| uint32_t ucode_length; |
| uint16_t umc_reg_init_offset; |
| uint16_t customer_ucode_name_offset; |
| uint16_t mclk_ss_percentage; |
| uint16_t mclk_ss_rate_10hz; |
| uint8_t umcip_min_ver; |
| uint8_t umcip_max_ver; |
| uint8_t vram_type; //enum of atom_dgpu_vram_type |
| uint8_t umc_config; |
| uint32_t mem_refclk_10khz; |
| }; |
| |
| |
| /* |
| *************************************************************************** |
| Data Table vram_info structure |
| *************************************************************************** |
| */ |
| struct atom_vram_module_v9 |
| { |
| // Design Specific Values |
| uint32_t memory_size; // Total memory size in unit of MB for CONFIG_MEMSIZE zeros |
| uint32_t channel_enable; // for 32 channel ASIC usage |
| uint32_t umcch_addrcfg; |
| uint32_t umcch_addrsel; |
| uint32_t umcch_colsel; |
| uint16_t vram_module_size; // Size of atom_vram_module_v9 |
| uint8_t ext_memory_id; // Current memory module ID |
| uint8_t memory_type; // enum of atom_dgpu_vram_type |
| uint8_t channel_num; // Number of mem. channels supported in this module |
| uint8_t channel_width; // CHANNEL_16BIT/CHANNEL_32BIT/CHANNEL_64BIT |
| uint8_t density; // _8Mx32, _16Mx32, _16Mx16, _32Mx16 |
| uint8_t tunningset_id; // MC phy registers set per. |
| uint8_t vender_rev_id; // [7:4] Revision, [3:0] Vendor code |
| uint8_t refreshrate; // [1:0]=RefreshFactor (00=8ms, 01=16ms, 10=32ms,11=64ms) |
| uint16_t vram_rsd2; // reserved |
| char dram_pnstring[20]; // part number end with '0'. |
| }; |
| |
| |
| struct atom_vram_info_header_v2_3 |
| { |
| struct atom_common_table_header table_header; |
| uint16_t mem_adjust_tbloffset; // offset of atom_umc_init_reg_block structure for memory vendor specific UMC adjust setting |
| uint16_t mem_clk_patch_tbloffset; // offset of atom_umc_init_reg_block structure for memory clock specific UMC setting |
| uint16_t mc_adjust_pertile_tbloffset; // offset of atom_umc_init_reg_block structure for Per Byte Offset Preset Settings |
| uint16_t mc_phyinit_tbloffset; // offset of atom_umc_init_reg_block structure for MC phy init set |
| uint16_t dram_data_remap_tbloffset; // reserved for now |
| uint16_t vram_rsd2[3]; |
| uint8_t vram_module_num; // indicate number of VRAM module |
| uint8_t vram_rsd1[2]; |
| uint8_t mc_phy_tile_num; // indicate the MCD tile number which use in DramDataRemapTbl and usMcAdjustPerTileTblOffset |
| struct atom_vram_module_v9 vram_module[16]; // just for allocation, real number of blocks is in ucNumOfVRAMModule; |
| }; |
| |
| struct atom_umc_register_addr_info{ |
| uint32_t umc_register_addr:24; |
| uint32_t umc_reg_type_ind:1; |
| uint32_t umc_reg_rsvd:7; |
| }; |
| |
| //atom_umc_register_addr_info. |
| enum atom_umc_register_addr_info_flag{ |
| b3ATOM_UMC_REG_ADD_INFO_INDIRECT_ACCESS =0x01, |
| }; |
| |
| union atom_umc_register_addr_info_access |
| { |
| struct atom_umc_register_addr_info umc_reg_addr; |
| uint32_t u32umc_reg_addr; |
| }; |
| |
| struct atom_umc_reg_setting_id_config{ |
| uint32_t memclockrange:24; |
| uint32_t mem_blk_id:8; |
| }; |
| |
| union atom_umc_reg_setting_id_config_access |
| { |
| struct atom_umc_reg_setting_id_config umc_id_access; |
| uint32_t u32umc_id_access; |
| }; |
| |
| struct atom_umc_reg_setting_data_block{ |
| union atom_umc_reg_setting_id_config_access block_id; |
| uint32_t u32umc_reg_data[1]; |
| }; |
| |
| struct atom_umc_init_reg_block{ |
| uint16_t umc_reg_num; |
| uint16_t reserved; |
| union atom_umc_register_addr_info_access umc_reg_list[1]; //for allocation purpose, the real number come from umc_reg_num; |
| struct atom_umc_reg_setting_data_block umc_reg_setting_list[1]; |
| }; |
| |
| |
| /* |
| *************************************************************************** |
| Data Table voltageobject_info structure |
| *************************************************************************** |
| */ |
| struct atom_i2c_data_entry |
| { |
| uint16_t i2c_reg_index; // i2c register address, can be up to 16bit |
| uint16_t i2c_reg_data; // i2c register data, can be up to 16bit |
| }; |
| |
| struct atom_voltage_object_header_v4{ |
| uint8_t voltage_type; //enum atom_voltage_type |
| uint8_t voltage_mode; //enum atom_voltage_object_mode |
| uint16_t object_size; //Size of Object |
| }; |
| |
| // atom_voltage_object_header_v4.voltage_mode |
| enum atom_voltage_object_mode |
| { |
| VOLTAGE_OBJ_GPIO_LUT = 0, //VOLTAGE and GPIO Lookup table ->atom_gpio_voltage_object_v4 |
| VOLTAGE_OBJ_VR_I2C_INIT_SEQ = 3, //VOLTAGE REGULATOR INIT sequece through I2C -> atom_i2c_voltage_object_v4 |
| VOLTAGE_OBJ_PHASE_LUT = 4, //Set Vregulator Phase lookup table ->atom_gpio_voltage_object_v4 |
| VOLTAGE_OBJ_SVID2 = 7, //Indicate voltage control by SVID2 ->atom_svid2_voltage_object_v4 |
| VOLTAGE_OBJ_EVV = 8, |
| VOLTAGE_OBJ_MERGED_POWER = 9, |
| }; |
| |
| struct atom_i2c_voltage_object_v4 |
| { |
| struct atom_voltage_object_header_v4 header; // voltage mode = VOLTAGE_OBJ_VR_I2C_INIT_SEQ |
| uint8_t regulator_id; //Indicate Voltage Regulator Id |
| uint8_t i2c_id; |
| uint8_t i2c_slave_addr; |
| uint8_t i2c_control_offset; |
| uint8_t i2c_flag; // Bit0: 0 - One byte data; 1 - Two byte data |
| uint8_t i2c_speed; // =0, use default i2c speed, otherwise use it in unit of kHz. |
| uint8_t reserved[2]; |
| struct atom_i2c_data_entry i2cdatalut[1]; // end with 0xff |
| }; |
| |
| // ATOM_I2C_VOLTAGE_OBJECT_V3.ucVoltageControlFlag |
| enum atom_i2c_voltage_control_flag |
| { |
| VOLTAGE_DATA_ONE_BYTE = 0, |
| VOLTAGE_DATA_TWO_BYTE = 1, |
| }; |
| |
| |
| struct atom_voltage_gpio_map_lut |
| { |
| uint32_t voltage_gpio_reg_val; // The Voltage ID which is used to program GPIO register |
| uint16_t voltage_level_mv; // The corresponding Voltage Value, in mV |
| }; |
| |
| struct atom_gpio_voltage_object_v4 |
| { |
| struct atom_voltage_object_header_v4 header; // voltage mode = VOLTAGE_OBJ_GPIO_LUT or VOLTAGE_OBJ_PHASE_LUT |
| uint8_t gpio_control_id; // default is 0 which indicate control through CG VID mode |
| uint8_t gpio_entry_num; // indiate the entry numbers of Votlage/Gpio value Look up table |
| uint8_t phase_delay_us; // phase delay in unit of micro second |
| uint8_t reserved; |
| uint32_t gpio_mask_val; // GPIO Mask value |
| struct atom_voltage_gpio_map_lut voltage_gpio_lut[1]; |
| }; |
| |
| struct atom_svid2_voltage_object_v4 |
| { |
| struct atom_voltage_object_header_v4 header; // voltage mode = VOLTAGE_OBJ_SVID2 |
| uint8_t loadline_psi1; // bit4:0= loadline setting ( Core Loadline trim and offset trim ), bit5=0:PSI1_L disable =1: PSI1_L enable |
| uint8_t psi0_l_vid_thresd; // VR PSI0_L VID threshold |
| uint8_t psi0_enable; // |
| uint8_t maxvstep; |
| uint8_t telemetry_offset; |
| uint8_t telemetry_gain; |
| uint16_t reserved1; |
| }; |
| |
| struct atom_merged_voltage_object_v4 |
| { |
| struct atom_voltage_object_header_v4 header; // voltage mode = VOLTAGE_OBJ_MERGED_POWER |
| uint8_t merged_powerrail_type; //enum atom_voltage_type |
| uint8_t reserved[3]; |
| }; |
| |
| union atom_voltage_object_v4{ |
| struct atom_gpio_voltage_object_v4 gpio_voltage_obj; |
| struct atom_i2c_voltage_object_v4 i2c_voltage_obj; |
| struct atom_svid2_voltage_object_v4 svid2_voltage_obj; |
| struct atom_merged_voltage_object_v4 merged_voltage_obj; |
| }; |
| |
| struct atom_voltage_objects_info_v4_1 |
| { |
| struct atom_common_table_header table_header; |
| union atom_voltage_object_v4 voltage_object[1]; //Info for Voltage control |
| }; |
| |
| |
| /* |
| *************************************************************************** |
| All Command Function structure definition |
| *************************************************************************** |
| */ |
| |
| /* |
| *************************************************************************** |
| Structures used by asic_init |
| *************************************************************************** |
| */ |
| |
| struct asic_init_engine_parameters |
| { |
| uint32_t sclkfreqin10khz:24; |
| uint32_t engineflag:8; /* enum atom_asic_init_engine_flag */ |
| }; |
| |
| struct asic_init_mem_parameters |
| { |
| uint32_t mclkfreqin10khz:24; |
| uint32_t memflag:8; /* enum atom_asic_init_mem_flag */ |
| }; |
| |
| struct asic_init_parameters_v2_1 |
| { |
| struct asic_init_engine_parameters engineparam; |
| struct asic_init_mem_parameters memparam; |
| }; |
| |
| struct asic_init_ps_allocation_v2_1 |
| { |
| struct asic_init_parameters_v2_1 param; |
| uint32_t reserved[16]; |
| }; |
| |
| |
| enum atom_asic_init_engine_flag |
| { |
| b3NORMAL_ENGINE_INIT = 0, |
| b3SRIOV_SKIP_ASIC_INIT = 0x02, |
| b3SRIOV_LOAD_UCODE = 0x40, |
| }; |
| |
| enum atom_asic_init_mem_flag |
| { |
| b3NORMAL_MEM_INIT = 0, |
| b3DRAM_SELF_REFRESH_EXIT =0x20, |
| }; |
| |
| /* |
| *************************************************************************** |
| Structures used by setengineclock |
| *************************************************************************** |
| */ |
| |
| struct set_engine_clock_parameters_v2_1 |
| { |
| uint32_t sclkfreqin10khz:24; |
| uint32_t sclkflag:8; /* enum atom_set_engine_mem_clock_flag, */ |
| uint32_t reserved[10]; |
| }; |
| |
| struct set_engine_clock_ps_allocation_v2_1 |
| { |
| struct set_engine_clock_parameters_v2_1 clockinfo; |
| uint32_t reserved[10]; |
| }; |
| |
| |
| enum atom_set_engine_mem_clock_flag |
| { |
| b3NORMAL_CHANGE_CLOCK = 0, |
| b3FIRST_TIME_CHANGE_CLOCK = 0x08, |
| b3STORE_DPM_TRAINGING = 0x40, //Applicable to memory clock change,when set, it store specific DPM mode training result |
| }; |
| |
| /* |
| *************************************************************************** |
| Structures used by getengineclock |
| *************************************************************************** |
| */ |
| struct get_engine_clock_parameter |
| { |
| uint32_t sclk_10khz; // current engine speed in 10KHz unit |
| uint32_t reserved; |
| }; |
| |
| /* |
| *************************************************************************** |
| Structures used by setmemoryclock |
| *************************************************************************** |
| */ |
| struct set_memory_clock_parameters_v2_1 |
| { |
| uint32_t mclkfreqin10khz:24; |
| uint32_t mclkflag:8; /* enum atom_set_engine_mem_clock_flag, */ |
| uint32_t reserved[10]; |
| }; |
| |
| struct set_memory_clock_ps_allocation_v2_1 |
| { |
| struct set_memory_clock_parameters_v2_1 clockinfo; |
| uint32_t reserved[10]; |
| }; |
| |
| |
| /* |
| *************************************************************************** |
| Structures used by getmemoryclock |
| *************************************************************************** |
| */ |
| struct get_memory_clock_parameter |
| { |
| uint32_t mclk_10khz; // current engine speed in 10KHz unit |
| uint32_t reserved; |
| }; |
| |
| |
| |
| /* |
| *************************************************************************** |
| Structures used by setvoltage |
| *************************************************************************** |
| */ |
| |
| struct set_voltage_parameters_v1_4 |
| { |
| uint8_t voltagetype; /* enum atom_voltage_type */ |
| uint8_t command; /* Indicate action: Set voltage level, enum atom_set_voltage_command */ |
| uint16_t vlevel_mv; /* real voltage level in unit of mv or Voltage Phase (0, 1, 2, .. ) */ |
| }; |
| |
| //set_voltage_parameters_v2_1.voltagemode |
| enum atom_set_voltage_command{ |
| ATOM_SET_VOLTAGE = 0, |
| ATOM_INIT_VOLTAGE_REGULATOR = 3, |
| ATOM_SET_VOLTAGE_PHASE = 4, |
| ATOM_GET_LEAKAGE_ID = 8, |
| }; |
| |
| struct set_voltage_ps_allocation_v1_4 |
| { |
| struct set_voltage_parameters_v1_4 setvoltageparam; |
| uint32_t reserved[10]; |
| }; |
| |
| |
| /* |
| *************************************************************************** |
| Structures used by computegpuclockparam |
| *************************************************************************** |
| */ |
| |
| //ATOM_COMPUTE_CLOCK_FREQ.ulComputeClockFlag |
| enum atom_gpu_clock_type |
| { |
| COMPUTE_GPUCLK_INPUT_FLAG_DEFAULT_GPUCLK =0x00, |
| COMPUTE_GPUCLK_INPUT_FLAG_GFXCLK =0x01, |
| COMPUTE_GPUCLK_INPUT_FLAG_UCLK =0x02, |
| }; |
| |
| struct compute_gpu_clock_input_parameter_v1_8 |
| { |
| uint32_t gpuclock_10khz:24; //Input= target clock, output = actual clock |
| uint32_t gpu_clock_type:8; //Input indicate clock type: enum atom_gpu_clock_type |
| uint32_t reserved[5]; |
| }; |
| |
| |
| struct compute_gpu_clock_output_parameter_v1_8 |
| { |
| uint32_t gpuclock_10khz:24; //Input= target clock, output = actual clock |
| uint32_t dfs_did:8; //return parameter: DFS divider which is used to program to register directly |
| uint32_t pll_fb_mult; //Feedback Multiplier, bit 8:0 int, bit 15:12 post_div, bit 31:16 frac |
| uint32_t pll_ss_fbsmult; // Spread FB Mult: bit 8:0 int, bit 31:16 frac |
| uint16_t pll_ss_slew_frac; |
| uint8_t pll_ss_enable; |
| uint8_t reserved; |
| uint32_t reserved1[2]; |
| }; |
| |
| |
| |
| /* |
| *************************************************************************** |
| Structures used by ReadEfuseValue |
| *************************************************************************** |
| */ |
| |
| struct read_efuse_input_parameters_v3_1 |
| { |
| uint16_t efuse_start_index; |
| uint8_t reserved; |
| uint8_t bitslen; |
| }; |
| |
| // ReadEfuseValue input/output parameter |
| union read_efuse_value_parameters_v3_1 |
| { |
| struct read_efuse_input_parameters_v3_1 efuse_info; |
| uint32_t efusevalue; |
| }; |
| |
| |
| /* |
| *************************************************************************** |
| Structures used by getsmuclockinfo |
| *************************************************************************** |
| */ |
| struct atom_get_smu_clock_info_parameters_v3_1 |
| { |
| uint8_t syspll_id; // 0= syspll0, 1=syspll1, 2=syspll2 |
| uint8_t clk_id; // atom_smu9_syspll0_clock_id (only valid when command == GET_SMU_CLOCK_INFO_V3_1_GET_CLOCK_FREQ ) |
| uint8_t command; // enum of atom_get_smu_clock_info_command |
| uint8_t dfsdid; // =0: get DFS DID from register, >0, give DFS divider, (only valid when command == GET_SMU_CLOCK_INFO_V3_1_GET_CLOCK_FREQ ) |
| }; |
| |
| enum atom_get_smu_clock_info_command |
| { |
| GET_SMU_CLOCK_INFO_V3_1_GET_CLOCK_FREQ = 0, |
| GET_SMU_CLOCK_INFO_V3_1_GET_PLLVCO_FREQ = 1, |
| GET_SMU_CLOCK_INFO_V3_1_GET_PLLREFCLK_FREQ = 2, |
| }; |
| |
| enum atom_smu9_syspll0_clock_id |
| { |
| SMU9_SYSPLL0_SMNCLK_ID = 0, // SMNCLK |
| SMU9_SYSPLL0_SOCCLK_ID = 1, // SOCCLK (FCLK) |
| SMU9_SYSPLL0_MP0CLK_ID = 2, // MP0CLK |
| SMU9_SYSPLL0_MP1CLK_ID = 3, // MP1CLK |
| SMU9_SYSPLL0_LCLK_ID = 4, // LCLK |
| SMU9_SYSPLL0_DCLK_ID = 5, // DCLK |
| SMU9_SYSPLL0_VCLK_ID = 6, // VCLK |
| SMU9_SYSPLL0_ECLK_ID = 7, // ECLK |
| SMU9_SYSPLL0_DCEFCLK_ID = 8, // DCEFCLK |
| SMU9_SYSPLL0_DPREFCLK_ID = 10, // DPREFCLK |
| SMU9_SYSPLL0_DISPCLK_ID = 11, // DISPCLK |
| }; |
| |
| enum atom_smu11_syspll_id { |
| SMU11_SYSPLL0_ID = 0, |
| SMU11_SYSPLL1_0_ID = 1, |
| SMU11_SYSPLL1_1_ID = 2, |
| SMU11_SYSPLL1_2_ID = 3, |
| SMU11_SYSPLL2_ID = 4, |
| SMU11_SYSPLL3_0_ID = 5, |
| SMU11_SYSPLL3_1_ID = 6, |
| }; |
| |
| enum atom_smu11_syspll0_clock_id { |
| SMU11_SYSPLL0_ECLK_ID = 0, // ECLK |
| SMU11_SYSPLL0_SOCCLK_ID = 1, // SOCCLK |
| SMU11_SYSPLL0_MP0CLK_ID = 2, // MP0CLK |
| SMU11_SYSPLL0_DCLK_ID = 3, // DCLK |
| SMU11_SYSPLL0_VCLK_ID = 4, // VCLK |
| SMU11_SYSPLL0_DCEFCLK_ID = 5, // DCEFCLK |
| }; |
| |
| enum atom_smu11_syspll1_0_clock_id { |
| SMU11_SYSPLL1_0_UCLKA_ID = 0, // UCLK_a |
| }; |
| |
| enum atom_smu11_syspll1_1_clock_id { |
| SMU11_SYSPLL1_0_UCLKB_ID = 0, // UCLK_b |
| }; |
| |
| enum atom_smu11_syspll1_2_clock_id { |
| SMU11_SYSPLL1_0_FCLK_ID = 0, // FCLK |
| }; |
| |
| enum atom_smu11_syspll2_clock_id { |
| SMU11_SYSPLL2_GFXCLK_ID = 0, // GFXCLK |
| }; |
| |
| enum atom_smu11_syspll3_0_clock_id { |
| SMU11_SYSPLL3_0_WAFCLK_ID = 0, // WAFCLK |
| SMU11_SYSPLL3_0_DISPCLK_ID = 1, // DISPCLK |
| SMU11_SYSPLL3_0_DPREFCLK_ID = 2, // DPREFCLK |
| }; |
| |
| enum atom_smu11_syspll3_1_clock_id { |
| SMU11_SYSPLL3_1_MP1CLK_ID = 0, // MP1CLK |
| SMU11_SYSPLL3_1_SMNCLK_ID = 1, // SMNCLK |
| SMU11_SYSPLL3_1_LCLK_ID = 2, // LCLK |
| }; |
| |
| struct atom_get_smu_clock_info_output_parameters_v3_1 |
| { |
| union { |
| uint32_t smu_clock_freq_hz; |
| uint32_t syspllvcofreq_10khz; |
| uint32_t sysspllrefclk_10khz; |
| }atom_smu_outputclkfreq; |
| }; |
| |
| |
| |
| /* |
| *************************************************************************** |
| Structures used by dynamicmemorysettings |
| *************************************************************************** |
| */ |
| |
| enum atom_dynamic_memory_setting_command |
| { |
| COMPUTE_MEMORY_PLL_PARAM = 1, |
| COMPUTE_ENGINE_PLL_PARAM = 2, |
| ADJUST_MC_SETTING_PARAM = 3, |
| }; |
| |
| /* when command = COMPUTE_MEMORY_PLL_PARAM or ADJUST_MC_SETTING_PARAM */ |
| struct dynamic_mclk_settings_parameters_v2_1 |
| { |
| uint32_t mclk_10khz:24; //Input= target mclk |
| uint32_t command:8; //command enum of atom_dynamic_memory_setting_command |
| uint32_t reserved; |
| }; |
| |
| /* when command = COMPUTE_ENGINE_PLL_PARAM */ |
| struct dynamic_sclk_settings_parameters_v2_1 |
| { |
| uint32_t sclk_10khz:24; //Input= target mclk |
| uint32_t command:8; //command enum of atom_dynamic_memory_setting_command |
| uint32_t mclk_10khz; |
| uint32_t reserved; |
| }; |
| |
| union dynamic_memory_settings_parameters_v2_1 |
| { |
| struct dynamic_mclk_settings_parameters_v2_1 mclk_setting; |
| struct dynamic_sclk_settings_parameters_v2_1 sclk_setting; |
| }; |
| |
| |
| |
| /* |
| *************************************************************************** |
| Structures used by memorytraining |
| *************************************************************************** |
| */ |
| |
| enum atom_umc6_0_ucode_function_call_enum_id |
| { |
| UMC60_UCODE_FUNC_ID_REINIT = 0, |
| UMC60_UCODE_FUNC_ID_ENTER_SELFREFRESH = 1, |
| UMC60_UCODE_FUNC_ID_EXIT_SELFREFRESH = 2, |
| }; |
| |
| |
| struct memory_training_parameters_v2_1 |
| { |
| uint8_t ucode_func_id; |
| uint8_t ucode_reserved[3]; |
| uint32_t reserved[5]; |
| }; |
| |
| |
| /* |
| *************************************************************************** |
| Structures used by setpixelclock |
| *************************************************************************** |
| */ |
| |
| struct set_pixel_clock_parameter_v1_7 |
| { |
| uint32_t pixclk_100hz; // target the pixel clock to drive the CRTC timing in unit of 100Hz. |
| |
| uint8_t pll_id; // ATOM_PHY_PLL0/ATOM_PHY_PLL1/ATOM_PPLL0 |
| uint8_t encoderobjid; // ASIC encoder id defined in objectId.h, |
| // indicate which graphic encoder will be used. |
| uint8_t encoder_mode; // Encoder mode: |
| uint8_t miscinfo; // enum atom_set_pixel_clock_v1_7_misc_info |
| uint8_t crtc_id; // enum of atom_crtc_def |
| uint8_t deep_color_ratio; // HDMI panel bit depth: enum atom_set_pixel_clock_v1_7_deepcolor_ratio |
| uint8_t reserved1[2]; |
| uint32_t reserved2; |
| }; |
| |
| //ucMiscInfo |
| enum atom_set_pixel_clock_v1_7_misc_info |
| { |
| PIXEL_CLOCK_V7_MISC_FORCE_PROG_PPLL = 0x01, |
| PIXEL_CLOCK_V7_MISC_PROG_PHYPLL = 0x02, |
| PIXEL_CLOCK_V7_MISC_YUV420_MODE = 0x04, |
| PIXEL_CLOCK_V7_MISC_DVI_DUALLINK_EN = 0x08, |
| PIXEL_CLOCK_V7_MISC_REF_DIV_SRC = 0x30, |
| PIXEL_CLOCK_V7_MISC_REF_DIV_SRC_XTALIN = 0x00, |
| PIXEL_CLOCK_V7_MISC_REF_DIV_SRC_PCIE = 0x10, |
| PIXEL_CLOCK_V7_MISC_REF_DIV_SRC_GENLK = 0x20, |
| PIXEL_CLOCK_V7_MISC_REF_DIV_SRC_REFPAD = 0x30, |
| PIXEL_CLOCK_V7_MISC_ATOMIC_UPDATE = 0x40, |
| PIXEL_CLOCK_V7_MISC_FORCE_SS_DIS = 0x80, |
| }; |
| |
| /* deep_color_ratio */ |
| enum atom_set_pixel_clock_v1_7_deepcolor_ratio |
| { |
| PIXEL_CLOCK_V7_DEEPCOLOR_RATIO_DIS = 0x00, //00 - DCCG_DEEP_COLOR_DTO_DISABLE: Disable Deep Color DTO |
| PIXEL_CLOCK_V7_DEEPCOLOR_RATIO_5_4 = 0x01, //01 - DCCG_DEEP_COLOR_DTO_5_4_RATIO: Set Deep Color DTO to 5:4 |
| PIXEL_CLOCK_V7_DEEPCOLOR_RATIO_3_2 = 0x02, //02 - DCCG_DEEP_COLOR_DTO_3_2_RATIO: Set Deep Color DTO to 3:2 |
| PIXEL_CLOCK_V7_DEEPCOLOR_RATIO_2_1 = 0x03, //03 - DCCG_DEEP_COLOR_DTO_2_1_RATIO: Set Deep Color DTO to 2:1 |
| }; |
| |
| /* |
| *************************************************************************** |
| Structures used by setdceclock |
| *************************************************************************** |
| */ |
| |
| // SetDCEClock input parameter for DCE11.2( ELM and BF ) and above |
| struct set_dce_clock_parameters_v2_1 |
| { |
| uint32_t dceclk_10khz; // target DCE frequency in unit of 10KHZ, return real DISPCLK/DPREFCLK frequency. |
| uint8_t dceclktype; // =0: DISPCLK =1: DPREFCLK =2: PIXCLK |
| uint8_t dceclksrc; // ATOM_PLL0 or ATOM_GCK_DFS or ATOM_FCH_CLK or ATOM_COMBOPHY_PLLx |
| uint8_t dceclkflag; // Bit [1:0] = PPLL ref clock source ( when ucDCEClkSrc= ATOM_PPLL0 ) |
| uint8_t crtc_id; // ucDisp Pipe Id, ATOM_CRTC0/1/2/..., use only when ucDCEClkType = PIXCLK |
| }; |
| |
| //ucDCEClkType |
| enum atom_set_dce_clock_clock_type |
| { |
| DCE_CLOCK_TYPE_DISPCLK = 0, |
| DCE_CLOCK_TYPE_DPREFCLK = 1, |
| DCE_CLOCK_TYPE_PIXELCLK = 2, // used by VBIOS internally, called by SetPixelClock |
| }; |
| |
| //ucDCEClkFlag when ucDCEClkType == DPREFCLK |
| enum atom_set_dce_clock_dprefclk_flag |
| { |
| DCE_CLOCK_FLAG_PLL_REFCLK_SRC_MASK = 0x03, |
| DCE_CLOCK_FLAG_PLL_REFCLK_SRC_GENERICA = 0x00, |
| DCE_CLOCK_FLAG_PLL_REFCLK_SRC_GENLK = 0x01, |
| DCE_CLOCK_FLAG_PLL_REFCLK_SRC_PCIE = 0x02, |
| DCE_CLOCK_FLAG_PLL_REFCLK_SRC_XTALIN = 0x03, |
| }; |
| |
| //ucDCEClkFlag when ucDCEClkType == PIXCLK |
| enum atom_set_dce_clock_pixclk_flag |
| { |
| DCE_CLOCK_FLAG_PCLK_DEEPCOLOR_RATIO_MASK = 0x03, |
| DCE_CLOCK_FLAG_PCLK_DEEPCOLOR_RATIO_DIS = 0x00, //00 - DCCG_DEEP_COLOR_DTO_DISABLE: Disable Deep Color DTO |
| DCE_CLOCK_FLAG_PCLK_DEEPCOLOR_RATIO_5_4 = 0x01, //01 - DCCG_DEEP_COLOR_DTO_5_4_RATIO: Set Deep Color DTO to 5:4 |
| DCE_CLOCK_FLAG_PCLK_DEEPCOLOR_RATIO_3_2 = 0x02, //02 - DCCG_DEEP_COLOR_DTO_3_2_RATIO: Set Deep Color DTO to 3:2 |
| DCE_CLOCK_FLAG_PCLK_DEEPCOLOR_RATIO_2_1 = 0x03, //03 - DCCG_DEEP_COLOR_DTO_2_1_RATIO: Set Deep Color DTO to 2:1 |
| DCE_CLOCK_FLAG_PIXCLK_YUV420_MODE = 0x04, |
| }; |
| |
| struct set_dce_clock_ps_allocation_v2_1 |
| { |
| struct set_dce_clock_parameters_v2_1 param; |
| uint32_t ulReserved[2]; |
| }; |
| |
| |
| /****************************************************************************/ |
| // Structures used by BlankCRTC |
| /****************************************************************************/ |
| struct blank_crtc_parameters |
| { |
| uint8_t crtc_id; // enum atom_crtc_def |
| uint8_t blanking; // enum atom_blank_crtc_command |
| uint16_t reserved; |
| uint32_t reserved1; |
| }; |
| |
| enum atom_blank_crtc_command |
| { |
| ATOM_BLANKING = 1, |
| ATOM_BLANKING_OFF = 0, |
| }; |
| |
| /****************************************************************************/ |
| // Structures used by enablecrtc |
| /****************************************************************************/ |
| struct enable_crtc_parameters |
| { |
| uint8_t crtc_id; // enum atom_crtc_def |
| uint8_t enable; // ATOM_ENABLE or ATOM_DISABLE |
| uint8_t padding[2]; |
| }; |
| |
| |
| /****************************************************************************/ |
| // Structure used by EnableDispPowerGating |
| /****************************************************************************/ |
| struct enable_disp_power_gating_parameters_v2_1 |
| { |
| uint8_t disp_pipe_id; // ATOM_CRTC1, ATOM_CRTC2, ... |
| uint8_t enable; // ATOM_ENABLE or ATOM_DISABLE |
| uint8_t padding[2]; |
| }; |
| |
| struct enable_disp_power_gating_ps_allocation |
| { |
| struct enable_disp_power_gating_parameters_v2_1 param; |
| uint32_t ulReserved[4]; |
| }; |
| |
| /****************************************************************************/ |
| // Structure used in setcrtc_usingdtdtiming |
| /****************************************************************************/ |
| struct set_crtc_using_dtd_timing_parameters |
| { |
| uint16_t h_size; |
| uint16_t h_blanking_time; |
| uint16_t v_size; |
| uint16_t v_blanking_time; |
| uint16_t h_syncoffset; |
| uint16_t h_syncwidth; |
| uint16_t v_syncoffset; |
| uint16_t v_syncwidth; |
| uint16_t modemiscinfo; |
| uint8_t h_border; |
| uint8_t v_border; |
| uint8_t crtc_id; // enum atom_crtc_def |
| uint8_t encoder_mode; // atom_encode_mode_def |
| uint8_t padding[2]; |
| }; |
| |
| |
| /****************************************************************************/ |
| // Structures used by processi2cchanneltransaction |
| /****************************************************************************/ |
| struct process_i2c_channel_transaction_parameters |
| { |
| uint8_t i2cspeed_khz; |
| union { |
| uint8_t regindex; |
| uint8_t status; /* enum atom_process_i2c_flag */ |
| } regind_status; |
| uint16_t i2c_data_out; |
| uint8_t flag; /* enum atom_process_i2c_status */ |
| uint8_t trans_bytes; |
| uint8_t slave_addr; |
| uint8_t i2c_id; |
| }; |
| |
| //ucFlag |
| enum atom_process_i2c_flag |
| { |
| HW_I2C_WRITE = 1, |
| HW_I2C_READ = 0, |
| I2C_2BYTE_ADDR = 0x02, |
| HW_I2C_SMBUS_BYTE_WR = 0x04, |
| }; |
| |
| //status |
| enum atom_process_i2c_status |
| { |
| HW_ASSISTED_I2C_STATUS_FAILURE =2, |
| HW_ASSISTED_I2C_STATUS_SUCCESS =1, |
| }; |
| |
| |
| /****************************************************************************/ |
| // Structures used by processauxchanneltransaction |
| /****************************************************************************/ |
| |
| struct process_aux_channel_transaction_parameters_v1_2 |
| { |
| uint16_t aux_request; |
| uint16_t dataout; |
| uint8_t channelid; |
| union { |
| uint8_t reply_status; |
| uint8_t aux_delay; |
| } aux_status_delay; |
| uint8_t dataout_len; |
| uint8_t hpd_id; //=0: HPD1, =1: HPD2, =2: HPD3, =3: HPD4, =4: HPD5, =5: HPD6 |
| }; |
| |
| |
| /****************************************************************************/ |
| // Structures used by selectcrtc_source |
| /****************************************************************************/ |
| |
| struct select_crtc_source_parameters_v2_3 |
| { |
| uint8_t crtc_id; // enum atom_crtc_def |
| uint8_t encoder_id; // enum atom_dig_def |
| uint8_t encode_mode; // enum atom_encode_mode_def |
| uint8_t dst_bpc; // enum atom_panel_bit_per_color |
| }; |
| |
| |
| /****************************************************************************/ |
| // Structures used by digxencodercontrol |
| /****************************************************************************/ |
| |
| // ucAction: |
| enum atom_dig_encoder_control_action |
| { |
| ATOM_ENCODER_CMD_DISABLE_DIG = 0, |
| ATOM_ENCODER_CMD_ENABLE_DIG = 1, |
| ATOM_ENCODER_CMD_DP_LINK_TRAINING_START = 0x08, |
| ATOM_ENCODER_CMD_DP_LINK_TRAINING_PATTERN1 = 0x09, |
| ATOM_ENCODER_CMD_DP_LINK_TRAINING_PATTERN2 = 0x0a, |
| ATOM_ENCODER_CMD_DP_LINK_TRAINING_PATTERN3 = 0x13, |
| ATOM_ENCODER_CMD_DP_LINK_TRAINING_COMPLETE = 0x0b, |
| ATOM_ENCODER_CMD_DP_VIDEO_OFF = 0x0c, |
| ATOM_ENCODER_CMD_DP_VIDEO_ON = 0x0d, |
| ATOM_ENCODER_CMD_SETUP_PANEL_MODE = 0x10, |
| ATOM_ENCODER_CMD_DP_LINK_TRAINING_PATTERN4 = 0x14, |
| ATOM_ENCODER_CMD_STREAM_SETUP = 0x0F, |
| ATOM_ENCODER_CMD_LINK_SETUP = 0x11, |
| ATOM_ENCODER_CMD_ENCODER_BLANK = 0x12, |
| }; |
| |
| //define ucPanelMode |
| enum atom_dig_encoder_control_panelmode |
| { |
| DP_PANEL_MODE_DISABLE = 0x00, |
| DP_PANEL_MODE_ENABLE_eDP_MODE = 0x01, |
| DP_PANEL_MODE_ENABLE_LVLINK_MODE = 0x11, |
| }; |
| |
| //ucDigId |
| enum atom_dig_encoder_control_v5_digid |
| { |
| ATOM_ENCODER_CONFIG_V5_DIG0_ENCODER = 0x00, |
| ATOM_ENCODER_CONFIG_V5_DIG1_ENCODER = 0x01, |
| ATOM_ENCODER_CONFIG_V5_DIG2_ENCODER = 0x02, |
| ATOM_ENCODER_CONFIG_V5_DIG3_ENCODER = 0x03, |
| ATOM_ENCODER_CONFIG_V5_DIG4_ENCODER = 0x04, |
| ATOM_ENCODER_CONFIG_V5_DIG5_ENCODER = 0x05, |
| ATOM_ENCODER_CONFIG_V5_DIG6_ENCODER = 0x06, |
| ATOM_ENCODER_CONFIG_V5_DIG7_ENCODER = 0x07, |
| }; |
| |
| struct dig_encoder_stream_setup_parameters_v1_5 |
| { |
| uint8_t digid; // 0~6 map to DIG0~DIG6 enum atom_dig_encoder_control_v5_digid |
| uint8_t action; // = ATOM_ENOCODER_CMD_STREAM_SETUP |
| uint8_t digmode; // ATOM_ENCODER_MODE_DP/ATOM_ENCODER_MODE_DVI/ATOM_ENCODER_MODE_HDMI |
| uint8_t lanenum; // Lane number |
| uint32_t pclk_10khz; // Pixel Clock in 10Khz |
| uint8_t bitpercolor; |
| uint8_t dplinkrate_270mhz;//= DP link rate/270Mhz, =6: 1.62G = 10: 2.7G, =20: 5.4Ghz, =30: 8.1Ghz etc |
| uint8_t reserved[2]; |
| }; |
| |
| struct dig_encoder_link_setup_parameters_v1_5 |
| { |
| uint8_t digid; // 0~6 map to DIG0~DIG6 enum atom_dig_encoder_control_v5_digid |
| uint8_t action; // = ATOM_ENOCODER_CMD_LINK_SETUP |
| uint8_t digmode; // ATOM_ENCODER_MODE_DP/ATOM_ENCODER_MODE_DVI/ATOM_ENCODER_MODE_HDMI |
| uint8_t lanenum; // Lane number |
| uint8_t symclk_10khz; // Symbol Clock in 10Khz |
| uint8_t hpd_sel; |
| uint8_t digfe_sel; // DIG stream( front-end ) selection, bit0 means DIG0 FE is enable, |
| uint8_t reserved[2]; |
| }; |
| |
| struct dp_panel_mode_set_parameters_v1_5 |
| { |
| uint8_t digid; // 0~6 map to DIG0~DIG6 enum atom_dig_encoder_control_v5_digid |
| uint8_t action; // = ATOM_ENCODER_CMD_DPLINK_SETUP |
| uint8_t panelmode; // enum atom_dig_encoder_control_panelmode |
| uint8_t reserved1; |
| uint32_t reserved2[2]; |
| }; |
| |
| struct dig_encoder_generic_cmd_parameters_v1_5 |
| { |
| uint8_t digid; // 0~6 map to DIG0~DIG6 enum atom_dig_encoder_control_v5_digid |
| uint8_t action; // = rest of generic encoder command which does not carry any parameters |
| uint8_t reserved1[2]; |
| uint32_t reserved2[2]; |
| }; |
| |
| union dig_encoder_control_parameters_v1_5 |
| { |
| struct dig_encoder_generic_cmd_parameters_v1_5 cmd_param; |
| struct dig_encoder_stream_setup_parameters_v1_5 stream_param; |
| struct dig_encoder_link_setup_parameters_v1_5 link_param; |
| struct dp_panel_mode_set_parameters_v1_5 dppanel_param; |
| }; |
| |
| /* |
| *************************************************************************** |
| Structures used by dig1transmittercontrol |
| *************************************************************************** |
| */ |
| struct dig_transmitter_control_parameters_v1_6 |
| { |
| uint8_t phyid; // 0=UNIPHYA, 1=UNIPHYB, 2=UNIPHYC, 3=UNIPHYD, 4= UNIPHYE 5=UNIPHYF |
| uint8_t action; // define as ATOM_TRANSMITER_ACTION_xxx |
| union { |
| uint8_t digmode; // enum atom_encode_mode_def |
| uint8_t dplaneset; // DP voltage swing and pre-emphasis value defined in DPCD DP_LANE_SET, "DP_LANE_SET__xDB_y_zV" |
| } mode_laneset; |
| uint8_t lanenum; // Lane number 1, 2, 4, 8 |
| uint32_t symclk_10khz; // Symbol Clock in 10Khz |
| uint8_t hpdsel; // =1: HPD1, =2: HPD2, .... =6: HPD6, =0: HPD is not assigned |
| uint8_t digfe_sel; // DIG stream( front-end ) selection, bit0 means DIG0 FE is enable, |
| uint8_t connobj_id; // Connector Object Id defined in ObjectId.h |
| uint8_t reserved; |
| uint32_t reserved1; |
| }; |
| |
| struct dig_transmitter_control_ps_allocation_v1_6 |
| { |
| struct dig_transmitter_control_parameters_v1_6 param; |
| uint32_t reserved[4]; |
| }; |
| |
| //ucAction |
| enum atom_dig_transmitter_control_action |
| { |
| ATOM_TRANSMITTER_ACTION_DISABLE = 0, |
| ATOM_TRANSMITTER_ACTION_ENABLE = 1, |
| ATOM_TRANSMITTER_ACTION_LCD_BLOFF = 2, |
| ATOM_TRANSMITTER_ACTION_LCD_BLON = 3, |
| ATOM_TRANSMITTER_ACTION_BL_BRIGHTNESS_CONTROL = 4, |
| ATOM_TRANSMITTER_ACTION_LCD_SELFTEST_START = 5, |
| ATOM_TRANSMITTER_ACTION_LCD_SELFTEST_STOP = 6, |
| ATOM_TRANSMITTER_ACTION_INIT = 7, |
| ATOM_TRANSMITTER_ACTION_DISABLE_OUTPUT = 8, |
| ATOM_TRANSMITTER_ACTION_ENABLE_OUTPUT = 9, |
| ATOM_TRANSMITTER_ACTION_SETUP = 10, |
| ATOM_TRANSMITTER_ACTION_SETUP_VSEMPH = 11, |
| ATOM_TRANSMITTER_ACTION_POWER_ON = 12, |
| ATOM_TRANSMITTER_ACTION_POWER_OFF = 13, |
| }; |
| |
| // digfe_sel |
| enum atom_dig_transmitter_control_digfe_sel |
| { |
| ATOM_TRANMSITTER_V6__DIGA_SEL = 0x01, |
| ATOM_TRANMSITTER_V6__DIGB_SEL = 0x02, |
| ATOM_TRANMSITTER_V6__DIGC_SEL = 0x04, |
| ATOM_TRANMSITTER_V6__DIGD_SEL = 0x08, |
| ATOM_TRANMSITTER_V6__DIGE_SEL = 0x10, |
| ATOM_TRANMSITTER_V6__DIGF_SEL = 0x20, |
| ATOM_TRANMSITTER_V6__DIGG_SEL = 0x40, |
| }; |
| |
| |
| //ucHPDSel |
| enum atom_dig_transmitter_control_hpd_sel |
| { |
| ATOM_TRANSMITTER_V6_NO_HPD_SEL = 0x00, |
| ATOM_TRANSMITTER_V6_HPD1_SEL = 0x01, |
| ATOM_TRANSMITTER_V6_HPD2_SEL = 0x02, |
| ATOM_TRANSMITTER_V6_HPD3_SEL = 0x03, |
| ATOM_TRANSMITTER_V6_HPD4_SEL = 0x04, |
| ATOM_TRANSMITTER_V6_HPD5_SEL = 0x05, |
| ATOM_TRANSMITTER_V6_HPD6_SEL = 0x06, |
| }; |
| |
| // ucDPLaneSet |
| enum atom_dig_transmitter_control_dplaneset |
| { |
| DP_LANE_SET__0DB_0_4V = 0x00, |
| DP_LANE_SET__0DB_0_6V = 0x01, |
| DP_LANE_SET__0DB_0_8V = 0x02, |
| DP_LANE_SET__0DB_1_2V = 0x03, |
| DP_LANE_SET__3_5DB_0_4V = 0x08, |
| DP_LANE_SET__3_5DB_0_6V = 0x09, |
| DP_LANE_SET__3_5DB_0_8V = 0x0a, |
| DP_LANE_SET__6DB_0_4V = 0x10, |
| DP_LANE_SET__6DB_0_6V = 0x11, |
| DP_LANE_SET__9_5DB_0_4V = 0x18, |
| }; |
| |
| |
| |
| /****************************************************************************/ |
| // Structures used by ExternalEncoderControl V2.4 |
| /****************************************************************************/ |
| |
| struct external_encoder_control_parameters_v2_4 |
| { |
| uint16_t pixelclock_10khz; // pixel clock in 10Khz, valid when ucAction=SETUP/ENABLE_OUTPUT |
| uint8_t config; // indicate which encoder, and DP link rate when ucAction = SETUP/ENABLE_OUTPUT |
| uint8_t action; // |
| uint8_t encodermode; // encoder mode, only used when ucAction = SETUP/ENABLE_OUTPUT |
| uint8_t lanenum; // lane number, only used when ucAction = SETUP/ENABLE_OUTPUT |
| uint8_t bitpercolor; // output bit per color, only valid when ucAction = SETUP/ENABLE_OUTPUT and ucEncodeMode= DP |
| uint8_t hpd_id; |
| }; |
| |
| |
| // ucAction |
| enum external_encoder_control_action_def |
| { |
| EXTERNAL_ENCODER_ACTION_V3_DISABLE_OUTPUT = 0x00, |
| EXTERNAL_ENCODER_ACTION_V3_ENABLE_OUTPUT = 0x01, |
| EXTERNAL_ENCODER_ACTION_V3_ENCODER_INIT = 0x07, |
| EXTERNAL_ENCODER_ACTION_V3_ENCODER_SETUP = 0x0f, |
| EXTERNAL_ENCODER_ACTION_V3_ENCODER_BLANKING_OFF = 0x10, |
| EXTERNAL_ENCODER_ACTION_V3_ENCODER_BLANKING = 0x11, |
| EXTERNAL_ENCODER_ACTION_V3_DACLOAD_DETECTION = 0x12, |
| EXTERNAL_ENCODER_ACTION_V3_DDC_SETUP = 0x14, |
| }; |
| |
| // ucConfig |
| enum external_encoder_control_v2_4_config_def |
| { |
| EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_MASK = 0x03, |
| EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_1_62GHZ = 0x00, |
| EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_2_70GHZ = 0x01, |
| EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_5_40GHZ = 0x02, |
| EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_3_24GHZ = 0x03, |
| EXTERNAL_ENCODER_CONFIG_V3_ENCODER_SEL_MAKS = 0x70, |
| EXTERNAL_ENCODER_CONFIG_V3_ENCODER1 = 0x00, |
| EXTERNAL_ENCODER_CONFIG_V3_ENCODER2 = 0x10, |
| EXTERNAL_ENCODER_CONFIG_V3_ENCODER3 = 0x20, |
| }; |
| |
| struct external_encoder_control_ps_allocation_v2_4 |
| { |
| struct external_encoder_control_parameters_v2_4 sExtEncoder; |
| uint32_t reserved[2]; |
| }; |
| |
| |
| /* |
| *************************************************************************** |
| AMD ACPI Table |
| |
| *************************************************************************** |
| */ |
| |
| struct amd_acpi_description_header{ |
| uint32_t signature; |
| uint32_t tableLength; //Length |
| uint8_t revision; |
| uint8_t checksum; |
| uint8_t oemId[6]; |
| uint8_t oemTableId[8]; //UINT64 OemTableId; |
| uint32_t oemRevision; |
| uint32_t creatorId; |
| uint32_t creatorRevision; |
| }; |
| |
| struct uefi_acpi_vfct{ |
| struct amd_acpi_description_header sheader; |
| uint8_t tableUUID[16]; //0x24 |
| uint32_t vbiosimageoffset; //0x34. Offset to the first GOP_VBIOS_CONTENT block from the beginning of the stucture. |
| uint32_t lib1Imageoffset; //0x38. Offset to the first GOP_LIB1_CONTENT block from the beginning of the stucture. |
| uint32_t reserved[4]; //0x3C |
| }; |
| |
| struct vfct_image_header{ |
| uint32_t pcibus; //0x4C |
| uint32_t pcidevice; //0x50 |
| uint32_t pcifunction; //0x54 |
| uint16_t vendorid; //0x58 |
| uint16_t deviceid; //0x5A |
| uint16_t ssvid; //0x5C |
| uint16_t ssid; //0x5E |
| uint32_t revision; //0x60 |
| uint32_t imagelength; //0x64 |
| }; |
| |
| |
| struct gop_vbios_content { |
| struct vfct_image_header vbiosheader; |
| uint8_t vbioscontent[1]; |
| }; |
| |
| struct gop_lib1_content { |
| struct vfct_image_header lib1header; |
| uint8_t lib1content[1]; |
| }; |
| |
| |
| |
| /* |
| *************************************************************************** |
| Scratch Register definitions |
| Each number below indicates which scratch regiser request, Active and |
| Connect all share the same definitions as display_device_tag defines |
| *************************************************************************** |
| */ |
| |
| enum scratch_register_def{ |
| ATOM_DEVICE_CONNECT_INFO_DEF = 0, |
| ATOM_BL_BRI_LEVEL_INFO_DEF = 2, |
| ATOM_ACTIVE_INFO_DEF = 3, |
| ATOM_LCD_INFO_DEF = 4, |
| ATOM_DEVICE_REQ_INFO_DEF = 5, |
| ATOM_ACC_CHANGE_INFO_DEF = 6, |
| ATOM_PRE_OS_MODE_INFO_DEF = 7, |
| ATOM_PRE_OS_ASSERTION_DEF = 8, //For GOP to record a 32bit assertion code, this is enabled by default in prodution GOP drivers. |
| ATOM_INTERNAL_TIMER_INFO_DEF = 10, |
| }; |
| |
| enum scratch_device_connect_info_bit_def{ |
| ATOM_DISPLAY_LCD1_CONNECT =0x0002, |
| ATOM_DISPLAY_DFP1_CONNECT =0x0008, |
| ATOM_DISPLAY_DFP2_CONNECT =0x0080, |
| ATOM_DISPLAY_DFP3_CONNECT =0x0200, |
| ATOM_DISPLAY_DFP4_CONNECT =0x0400, |
| ATOM_DISPLAY_DFP5_CONNECT =0x0800, |
| ATOM_DISPLAY_DFP6_CONNECT =0x0040, |
| ATOM_DISPLAY_DFPx_CONNECT =0x0ec8, |
| ATOM_CONNECT_INFO_DEVICE_MASK =0x0fff, |
| }; |
| |
| enum scratch_bl_bri_level_info_bit_def{ |
| ATOM_CURRENT_BL_LEVEL_SHIFT =0x8, |
| #ifndef _H2INC |
| ATOM_CURRENT_BL_LEVEL_MASK =0x0000ff00, |
| ATOM_DEVICE_DPMS_STATE =0x00010000, |
| #endif |
| }; |
| |
| enum scratch_active_info_bits_def{ |
| ATOM_DISPLAY_LCD1_ACTIVE =0x0002, |
| ATOM_DISPLAY_DFP1_ACTIVE =0x0008, |
| ATOM_DISPLAY_DFP2_ACTIVE =0x0080, |
| ATOM_DISPLAY_DFP3_ACTIVE =0x0200, |
| ATOM_DISPLAY_DFP4_ACTIVE =0x0400, |
| ATOM_DISPLAY_DFP5_ACTIVE =0x0800, |
| ATOM_DISPLAY_DFP6_ACTIVE =0x0040, |
| ATOM_ACTIVE_INFO_DEVICE_MASK =0x0fff, |
| }; |
| |
| enum scratch_device_req_info_bits_def{ |
| ATOM_DISPLAY_LCD1_REQ =0x0002, |
| ATOM_DISPLAY_DFP1_REQ =0x0008, |
| ATOM_DISPLAY_DFP2_REQ =0x0080, |
| ATOM_DISPLAY_DFP3_REQ =0x0200, |
| ATOM_DISPLAY_DFP4_REQ =0x0400, |
| ATOM_DISPLAY_DFP5_REQ =0x0800, |
| ATOM_DISPLAY_DFP6_REQ =0x0040, |
| ATOM_REQ_INFO_DEVICE_MASK =0x0fff, |
| }; |
| |
| enum scratch_acc_change_info_bitshift_def{ |
| ATOM_ACC_CHANGE_ACC_MODE_SHIFT =4, |
| ATOM_ACC_CHANGE_LID_STATUS_SHIFT =6, |
| }; |
| |
| enum scratch_acc_change_info_bits_def{ |
| ATOM_ACC_CHANGE_ACC_MODE =0x00000010, |
| ATOM_ACC_CHANGE_LID_STATUS =0x00000040, |
| }; |
| |
| enum scratch_pre_os_mode_info_bits_def{ |
| ATOM_PRE_OS_MODE_MASK =0x00000003, |
| ATOM_PRE_OS_MODE_VGA =0x00000000, |
| ATOM_PRE_OS_MODE_VESA =0x00000001, |
| ATOM_PRE_OS_MODE_GOP =0x00000002, |
| ATOM_PRE_OS_MODE_PIXEL_DEPTH =0x0000000C, |
| ATOM_PRE_OS_MODE_PIXEL_FORMAT_MASK=0x000000F0, |
| ATOM_PRE_OS_MODE_8BIT_PAL_EN =0x00000100, |
| ATOM_ASIC_INIT_COMPLETE =0x00000200, |
| #ifndef _H2INC |
| ATOM_PRE_OS_MODE_NUMBER_MASK =0xFFFF0000, |
| #endif |
| }; |
| |
| |
| |
| /* |
| *************************************************************************** |
| ATOM firmware ID header file |
| !! Please keep it at end of the atomfirmware.h !! |
| *************************************************************************** |
| */ |
| #include "atomfirmwareid.h" |
| #pragma pack() |
| |
| #endif |
| |