| What: /sys/bus/iio/devices/iio:deviceX/in_intensityY_raw |
| Date: May 2016 |
| KernelVersion: |
| Contact: Andrew F. Davis <afd@ti.com> |
| Description: |
| Get measured values from the ADC for these stages. Y is the |
| specific stage number corresponding to datasheet stage names |
| as follows: |
| |
| == ========== |
| 1 LED2 |
| 2 ALED2/LED3 |
| 3 LED1 |
| 4 ALED1/LED4 |
| == ========== |
| |
| Note that channels 5 and 6 represent LED2-ALED2 and LED1-ALED1 |
| respectively which simply helper channels containing the |
| calculated difference in the value of stage 1 - 2 and 3 - 4. |
| The values are expressed in 24-bit twos complement. |
| |
| What: /sys/bus/iio/devices/iio:deviceX/in_intensityY_offset |
| Date: May 2016 |
| KernelVersion: |
| Contact: Andrew F. Davis <afd@ti.com> |
| Description: |
| Get and set the offset cancellation DAC setting for these |
| stages. The values are expressed in 5-bit sign-magnitude. |
| |
| What: /sys/bus/iio/devices/iio:deviceX/in_intensityY_resistance |
| What: /sys/bus/iio/devices/iio:deviceX/in_intensityY_capacitance |
| Date: May 2016 |
| KernelVersion: |
| Contact: Andrew F. Davis <afd@ti.com> |
| Description: |
| Get and set the resistance and the capacitance settings for the |
| Transimpedance Amplifier during the associated stage. |
| |
| What: /sys/bus/iio/devices/iio:deviceX/out_currentY_raw |
| Date: May 2016 |
| KernelVersion: |
| Contact: Andrew F. Davis <afd@ti.com> |
| Description: |
| Get and set the LED current for the specified LED active during |
| this stage. Y is the specific stage number. |
