| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * linux/arch/arm/mach-footbridge/ebsa285.c |
| * |
| * EBSA285 machine fixup |
| */ |
| #include <linux/init.h> |
| #include <linux/io.h> |
| #include <linux/spinlock.h> |
| #include <linux/slab.h> |
| #include <linux/leds.h> |
| |
| #include <asm/hardware/dec21285.h> |
| #include <asm/mach-types.h> |
| |
| #include <asm/mach/arch.h> |
| |
| #include "common.h" |
| |
| /* LEDs */ |
| #if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS) |
| #define XBUS_AMBER_L BIT(0) |
| #define XBUS_GREEN_L BIT(1) |
| #define XBUS_RED_L BIT(2) |
| #define XBUS_TOGGLE BIT(7) |
| |
| struct ebsa285_led { |
| struct led_classdev cdev; |
| u8 mask; |
| }; |
| |
| /* |
| * The triggers lines up below will only be used if the |
| * LED triggers are compiled in. |
| */ |
| static const struct { |
| const char *name; |
| const char *trigger; |
| } ebsa285_leds[] = { |
| { "ebsa285:amber", "cpu0", }, |
| { "ebsa285:green", "heartbeat", }, |
| { "ebsa285:red",}, |
| }; |
| |
| static unsigned char hw_led_state; |
| static void __iomem *xbus; |
| |
| static void ebsa285_led_set(struct led_classdev *cdev, |
| enum led_brightness b) |
| { |
| struct ebsa285_led *led = container_of(cdev, |
| struct ebsa285_led, cdev); |
| |
| if (b == LED_OFF) |
| hw_led_state |= led->mask; |
| else |
| hw_led_state &= ~led->mask; |
| writeb(hw_led_state, xbus); |
| } |
| |
| static enum led_brightness ebsa285_led_get(struct led_classdev *cdev) |
| { |
| struct ebsa285_led *led = container_of(cdev, |
| struct ebsa285_led, cdev); |
| |
| return hw_led_state & led->mask ? LED_OFF : LED_FULL; |
| } |
| |
| static int __init ebsa285_leds_init(void) |
| { |
| int i; |
| |
| if (!machine_is_ebsa285()) |
| return -ENODEV; |
| |
| xbus = ioremap(XBUS_CS2, SZ_4K); |
| if (!xbus) |
| return -ENOMEM; |
| |
| /* 3 LEDS all off */ |
| hw_led_state = XBUS_AMBER_L | XBUS_GREEN_L | XBUS_RED_L; |
| writeb(hw_led_state, xbus); |
| |
| for (i = 0; i < ARRAY_SIZE(ebsa285_leds); i++) { |
| struct ebsa285_led *led; |
| |
| led = kzalloc(sizeof(*led), GFP_KERNEL); |
| if (!led) |
| break; |
| |
| led->cdev.name = ebsa285_leds[i].name; |
| led->cdev.brightness_set = ebsa285_led_set; |
| led->cdev.brightness_get = ebsa285_led_get; |
| led->cdev.default_trigger = ebsa285_leds[i].trigger; |
| led->mask = BIT(i); |
| |
| if (led_classdev_register(NULL, &led->cdev) < 0) { |
| kfree(led); |
| break; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Since we may have triggers on any subsystem, defer registration |
| * until after subsystem_init. |
| */ |
| fs_initcall(ebsa285_leds_init); |
| #endif |
| |
| MACHINE_START(EBSA285, "EBSA285") |
| /* Maintainer: Russell King */ |
| .atag_offset = 0x100, |
| .video_start = 0x000a0000, |
| .video_end = 0x000bffff, |
| .map_io = footbridge_map_io, |
| .init_early = footbridge_sched_clock, |
| .init_irq = footbridge_init_irq, |
| .init_time = footbridge_timer_init, |
| .restart = footbridge_restart, |
| MACHINE_END |
| |