| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * |
| * Parts of this file are based on Ralink's 2.6.21 BSP |
| * |
| * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> |
| * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> |
| * Copyright (C) 2013 John Crispin <john@phrozen.org> |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| |
| #include <asm/mipsregs.h> |
| #include <asm/mach-ralink/ralink_regs.h> |
| #include <asm/mach-ralink/rt3883.h> |
| #include <asm/mach-ralink/pinmux.h> |
| |
| #include "common.h" |
| |
| static struct rt2880_pmx_func i2c_func[] = { FUNC("i2c", 0, 1, 2) }; |
| static struct rt2880_pmx_func spi_func[] = { FUNC("spi", 0, 3, 4) }; |
| static struct rt2880_pmx_func uartf_func[] = { |
| FUNC("uartf", RT3883_GPIO_MODE_UARTF, 7, 8), |
| FUNC("pcm uartf", RT3883_GPIO_MODE_PCM_UARTF, 7, 8), |
| FUNC("pcm i2s", RT3883_GPIO_MODE_PCM_I2S, 7, 8), |
| FUNC("i2s uartf", RT3883_GPIO_MODE_I2S_UARTF, 7, 8), |
| FUNC("pcm gpio", RT3883_GPIO_MODE_PCM_GPIO, 11, 4), |
| FUNC("gpio uartf", RT3883_GPIO_MODE_GPIO_UARTF, 7, 4), |
| FUNC("gpio i2s", RT3883_GPIO_MODE_GPIO_I2S, 7, 4), |
| }; |
| static struct rt2880_pmx_func uartlite_func[] = { FUNC("uartlite", 0, 15, 2) }; |
| static struct rt2880_pmx_func jtag_func[] = { FUNC("jtag", 0, 17, 5) }; |
| static struct rt2880_pmx_func mdio_func[] = { FUNC("mdio", 0, 22, 2) }; |
| static struct rt2880_pmx_func lna_a_func[] = { FUNC("lna a", 0, 32, 3) }; |
| static struct rt2880_pmx_func lna_g_func[] = { FUNC("lna g", 0, 35, 3) }; |
| static struct rt2880_pmx_func pci_func[] = { |
| FUNC("pci-dev", 0, 40, 32), |
| FUNC("pci-host2", 1, 40, 32), |
| FUNC("pci-host1", 2, 40, 32), |
| FUNC("pci-fnc", 3, 40, 32) |
| }; |
| static struct rt2880_pmx_func ge1_func[] = { FUNC("ge1", 0, 72, 12) }; |
| static struct rt2880_pmx_func ge2_func[] = { FUNC("ge2", 0, 84, 12) }; |
| |
| static struct rt2880_pmx_group rt3883_pinmux_data[] = { |
| GRP("i2c", i2c_func, 1, RT3883_GPIO_MODE_I2C), |
| GRP("spi", spi_func, 1, RT3883_GPIO_MODE_SPI), |
| GRP("uartf", uartf_func, RT3883_GPIO_MODE_UART0_MASK, |
| RT3883_GPIO_MODE_UART0_SHIFT), |
| GRP("uartlite", uartlite_func, 1, RT3883_GPIO_MODE_UART1), |
| GRP("jtag", jtag_func, 1, RT3883_GPIO_MODE_JTAG), |
| GRP("mdio", mdio_func, 1, RT3883_GPIO_MODE_MDIO), |
| GRP("lna a", lna_a_func, 1, RT3883_GPIO_MODE_LNA_A), |
| GRP("lna g", lna_g_func, 1, RT3883_GPIO_MODE_LNA_G), |
| GRP("pci", pci_func, RT3883_GPIO_MODE_PCI_MASK, |
| RT3883_GPIO_MODE_PCI_SHIFT), |
| GRP("ge1", ge1_func, 1, RT3883_GPIO_MODE_GE1), |
| GRP("ge2", ge2_func, 1, RT3883_GPIO_MODE_GE2), |
| { 0 } |
| }; |
| |
| void __init ralink_clk_init(void) |
| { |
| unsigned long cpu_rate, sys_rate; |
| u32 syscfg0; |
| u32 clksel; |
| u32 ddr2; |
| |
| syscfg0 = rt_sysc_r32(RT3883_SYSC_REG_SYSCFG0); |
| clksel = ((syscfg0 >> RT3883_SYSCFG0_CPUCLK_SHIFT) & |
| RT3883_SYSCFG0_CPUCLK_MASK); |
| ddr2 = syscfg0 & RT3883_SYSCFG0_DRAM_TYPE_DDR2; |
| |
| switch (clksel) { |
| case RT3883_SYSCFG0_CPUCLK_250: |
| cpu_rate = 250000000; |
| sys_rate = (ddr2) ? 125000000 : 83000000; |
| break; |
| case RT3883_SYSCFG0_CPUCLK_384: |
| cpu_rate = 384000000; |
| sys_rate = (ddr2) ? 128000000 : 96000000; |
| break; |
| case RT3883_SYSCFG0_CPUCLK_480: |
| cpu_rate = 480000000; |
| sys_rate = (ddr2) ? 160000000 : 120000000; |
| break; |
| case RT3883_SYSCFG0_CPUCLK_500: |
| cpu_rate = 500000000; |
| sys_rate = (ddr2) ? 166000000 : 125000000; |
| break; |
| } |
| |
| ralink_clk_add("cpu", cpu_rate); |
| ralink_clk_add("10000100.timer", sys_rate); |
| ralink_clk_add("10000120.watchdog", sys_rate); |
| ralink_clk_add("10000500.uart", 40000000); |
| ralink_clk_add("10000900.i2c", 40000000); |
| ralink_clk_add("10000a00.i2s", 40000000); |
| ralink_clk_add("10000b00.spi", sys_rate); |
| ralink_clk_add("10000b40.spi", sys_rate); |
| ralink_clk_add("10000c00.uartlite", 40000000); |
| ralink_clk_add("10100000.ethernet", sys_rate); |
| ralink_clk_add("10180000.wmac", 40000000); |
| } |
| |
| void __init ralink_of_remap(void) |
| { |
| rt_sysc_membase = plat_of_remap_node("ralink,rt3883-sysc"); |
| rt_memc_membase = plat_of_remap_node("ralink,rt3883-memc"); |
| |
| if (!rt_sysc_membase || !rt_memc_membase) |
| panic("Failed to remap core resources"); |
| } |
| |
| void prom_soc_init(struct ralink_soc_info *soc_info) |
| { |
| void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT3883_SYSC_BASE); |
| const char *name; |
| u32 n0; |
| u32 n1; |
| u32 id; |
| |
| n0 = __raw_readl(sysc + RT3883_SYSC_REG_CHIPID0_3); |
| n1 = __raw_readl(sysc + RT3883_SYSC_REG_CHIPID4_7); |
| id = __raw_readl(sysc + RT3883_SYSC_REG_REVID); |
| |
| if (n0 == RT3883_CHIP_NAME0 && n1 == RT3883_CHIP_NAME1) { |
| soc_info->compatible = "ralink,rt3883-soc"; |
| name = "RT3883"; |
| } else { |
| panic("rt3883: unknown SoC, n0:%08x n1:%08x", n0, n1); |
| } |
| |
| snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN, |
| "Ralink %s ver:%u eco:%u", |
| name, |
| (id >> RT3883_REVID_VER_ID_SHIFT) & RT3883_REVID_VER_ID_MASK, |
| (id & RT3883_REVID_ECO_ID_MASK)); |
| |
| soc_info->mem_base = RT3883_SDRAM_BASE; |
| soc_info->mem_size_min = RT3883_MEM_SIZE_MIN; |
| soc_info->mem_size_max = RT3883_MEM_SIZE_MAX; |
| |
| rt2880_pinmux_data = rt3883_pinmux_data; |
| |
| ralink_soc = RT3883_SOC; |
| } |