| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Generic SH-4 / SH-4A PCIC operations (SH7751, SH7780). |
| * |
| * Copyright (C) 2002 - 2009 Paul Mundt |
| */ |
| #include <linux/pci.h> |
| #include <linux/io.h> |
| #include <linux/spinlock.h> |
| #include <asm/addrspace.h> |
| #include "pci-sh4.h" |
| |
| /* |
| * Direct access to PCI hardware... |
| */ |
| #define CONFIG_CMD(bus, devfn, where) \ |
| (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3)) |
| |
| /* |
| * Functions for accessing PCI configuration space with type 1 accesses |
| */ |
| static int sh4_pci_read(struct pci_bus *bus, unsigned int devfn, |
| int where, int size, u32 *val) |
| { |
| struct pci_channel *chan = bus->sysdata; |
| unsigned long flags; |
| u32 data; |
| |
| /* |
| * PCIPDR may only be accessed as 32 bit words, |
| * so we must do byte alignment by hand |
| */ |
| raw_spin_lock_irqsave(&pci_config_lock, flags); |
| pci_write_reg(chan, CONFIG_CMD(bus, devfn, where), SH4_PCIPAR); |
| data = pci_read_reg(chan, SH4_PCIPDR); |
| raw_spin_unlock_irqrestore(&pci_config_lock, flags); |
| |
| switch (size) { |
| case 1: |
| *val = (data >> ((where & 3) << 3)) & 0xff; |
| break; |
| case 2: |
| *val = (data >> ((where & 2) << 3)) & 0xffff; |
| break; |
| case 4: |
| *val = data; |
| break; |
| default: |
| return PCIBIOS_FUNC_NOT_SUPPORTED; |
| } |
| |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| /* |
| * Since SH4 only does 32bit access we'll have to do a read, |
| * mask,write operation. |
| * We'll allow an odd byte offset, though it should be illegal. |
| */ |
| static int sh4_pci_write(struct pci_bus *bus, unsigned int devfn, |
| int where, int size, u32 val) |
| { |
| struct pci_channel *chan = bus->sysdata; |
| unsigned long flags; |
| int shift; |
| u32 data; |
| |
| raw_spin_lock_irqsave(&pci_config_lock, flags); |
| pci_write_reg(chan, CONFIG_CMD(bus, devfn, where), SH4_PCIPAR); |
| data = pci_read_reg(chan, SH4_PCIPDR); |
| raw_spin_unlock_irqrestore(&pci_config_lock, flags); |
| |
| switch (size) { |
| case 1: |
| shift = (where & 3) << 3; |
| data &= ~(0xff << shift); |
| data |= ((val & 0xff) << shift); |
| break; |
| case 2: |
| shift = (where & 2) << 3; |
| data &= ~(0xffff << shift); |
| data |= ((val & 0xffff) << shift); |
| break; |
| case 4: |
| data = val; |
| break; |
| default: |
| return PCIBIOS_FUNC_NOT_SUPPORTED; |
| } |
| |
| pci_write_reg(chan, data, SH4_PCIPDR); |
| |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| struct pci_ops sh4_pci_ops = { |
| .read = sh4_pci_read, |
| .write = sh4_pci_write, |
| }; |
| |
| int __attribute__((weak)) pci_fixup_pcic(struct pci_channel *chan) |
| { |
| /* Nothing to do. */ |
| return 0; |
| } |