| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Tegra 124 cpufreq driver |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/clk.h> |
| #include <linux/cpufreq.h> |
| #include <linux/err.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/of_device.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_opp.h> |
| #include <linux/types.h> |
| |
| struct tegra124_cpufreq_priv { |
| struct clk *cpu_clk; |
| struct clk *pllp_clk; |
| struct clk *pllx_clk; |
| struct clk *dfll_clk; |
| struct platform_device *cpufreq_dt_pdev; |
| }; |
| |
| static int tegra124_cpu_switch_to_dfll(struct tegra124_cpufreq_priv *priv) |
| { |
| struct clk *orig_parent; |
| int ret; |
| |
| ret = clk_set_rate(priv->dfll_clk, clk_get_rate(priv->cpu_clk)); |
| if (ret) |
| return ret; |
| |
| orig_parent = clk_get_parent(priv->cpu_clk); |
| clk_set_parent(priv->cpu_clk, priv->pllp_clk); |
| |
| ret = clk_prepare_enable(priv->dfll_clk); |
| if (ret) |
| goto out; |
| |
| clk_set_parent(priv->cpu_clk, priv->dfll_clk); |
| |
| return 0; |
| |
| out: |
| clk_set_parent(priv->cpu_clk, orig_parent); |
| |
| return ret; |
| } |
| |
| static int tegra124_cpufreq_probe(struct platform_device *pdev) |
| { |
| struct tegra124_cpufreq_priv *priv; |
| struct device_node *np; |
| struct device *cpu_dev; |
| struct platform_device_info cpufreq_dt_devinfo = {}; |
| int ret; |
| |
| priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| cpu_dev = get_cpu_device(0); |
| if (!cpu_dev) |
| return -ENODEV; |
| |
| np = of_cpu_device_node_get(0); |
| if (!np) |
| return -ENODEV; |
| |
| priv->cpu_clk = of_clk_get_by_name(np, "cpu_g"); |
| if (IS_ERR(priv->cpu_clk)) { |
| ret = PTR_ERR(priv->cpu_clk); |
| goto out_put_np; |
| } |
| |
| priv->dfll_clk = of_clk_get_by_name(np, "dfll"); |
| if (IS_ERR(priv->dfll_clk)) { |
| ret = PTR_ERR(priv->dfll_clk); |
| goto out_put_cpu_clk; |
| } |
| |
| priv->pllx_clk = of_clk_get_by_name(np, "pll_x"); |
| if (IS_ERR(priv->pllx_clk)) { |
| ret = PTR_ERR(priv->pllx_clk); |
| goto out_put_dfll_clk; |
| } |
| |
| priv->pllp_clk = of_clk_get_by_name(np, "pll_p"); |
| if (IS_ERR(priv->pllp_clk)) { |
| ret = PTR_ERR(priv->pllp_clk); |
| goto out_put_pllx_clk; |
| } |
| |
| ret = tegra124_cpu_switch_to_dfll(priv); |
| if (ret) |
| goto out_put_pllp_clk; |
| |
| cpufreq_dt_devinfo.name = "cpufreq-dt"; |
| cpufreq_dt_devinfo.parent = &pdev->dev; |
| |
| priv->cpufreq_dt_pdev = |
| platform_device_register_full(&cpufreq_dt_devinfo); |
| if (IS_ERR(priv->cpufreq_dt_pdev)) { |
| ret = PTR_ERR(priv->cpufreq_dt_pdev); |
| goto out_put_pllp_clk; |
| } |
| |
| platform_set_drvdata(pdev, priv); |
| |
| of_node_put(np); |
| |
| return 0; |
| |
| out_put_pllp_clk: |
| clk_put(priv->pllp_clk); |
| out_put_pllx_clk: |
| clk_put(priv->pllx_clk); |
| out_put_dfll_clk: |
| clk_put(priv->dfll_clk); |
| out_put_cpu_clk: |
| clk_put(priv->cpu_clk); |
| out_put_np: |
| of_node_put(np); |
| |
| return ret; |
| } |
| |
| static int __maybe_unused tegra124_cpufreq_suspend(struct device *dev) |
| { |
| struct tegra124_cpufreq_priv *priv = dev_get_drvdata(dev); |
| int err; |
| |
| /* |
| * PLLP rate 408Mhz is below the CPU Fmax at Vmin and is safe to |
| * use during suspend and resume. So, switch the CPU clock source |
| * to PLLP and disable DFLL. |
| */ |
| err = clk_set_parent(priv->cpu_clk, priv->pllp_clk); |
| if (err < 0) { |
| dev_err(dev, "failed to reparent to PLLP: %d\n", err); |
| return err; |
| } |
| |
| clk_disable_unprepare(priv->dfll_clk); |
| |
| return 0; |
| } |
| |
| static int __maybe_unused tegra124_cpufreq_resume(struct device *dev) |
| { |
| struct tegra124_cpufreq_priv *priv = dev_get_drvdata(dev); |
| int err; |
| |
| /* |
| * Warmboot code powers up the CPU with PLLP clock source. |
| * Enable DFLL clock and switch CPU clock source back to DFLL. |
| */ |
| err = clk_prepare_enable(priv->dfll_clk); |
| if (err < 0) { |
| dev_err(dev, "failed to enable DFLL clock for CPU: %d\n", err); |
| goto disable_cpufreq; |
| } |
| |
| err = clk_set_parent(priv->cpu_clk, priv->dfll_clk); |
| if (err < 0) { |
| dev_err(dev, "failed to reparent to DFLL clock: %d\n", err); |
| goto disable_dfll; |
| } |
| |
| return 0; |
| |
| disable_dfll: |
| clk_disable_unprepare(priv->dfll_clk); |
| disable_cpufreq: |
| disable_cpufreq(); |
| |
| return err; |
| } |
| |
| static const struct dev_pm_ops tegra124_cpufreq_pm_ops = { |
| SET_SYSTEM_SLEEP_PM_OPS(tegra124_cpufreq_suspend, |
| tegra124_cpufreq_resume) |
| }; |
| |
| static struct platform_driver tegra124_cpufreq_platdrv = { |
| .driver.name = "cpufreq-tegra124", |
| .driver.pm = &tegra124_cpufreq_pm_ops, |
| .probe = tegra124_cpufreq_probe, |
| }; |
| |
| static int __init tegra_cpufreq_init(void) |
| { |
| int ret; |
| struct platform_device *pdev; |
| |
| if (!(of_machine_is_compatible("nvidia,tegra124") || |
| of_machine_is_compatible("nvidia,tegra210"))) |
| return -ENODEV; |
| |
| /* |
| * Platform driver+device required for handling EPROBE_DEFER with |
| * the regulator and the DFLL clock |
| */ |
| ret = platform_driver_register(&tegra124_cpufreq_platdrv); |
| if (ret) |
| return ret; |
| |
| pdev = platform_device_register_simple("cpufreq-tegra124", -1, NULL, 0); |
| if (IS_ERR(pdev)) { |
| platform_driver_unregister(&tegra124_cpufreq_platdrv); |
| return PTR_ERR(pdev); |
| } |
| |
| return 0; |
| } |
| module_init(tegra_cpufreq_init); |
| |
| MODULE_AUTHOR("Tuomas Tynkkynen <ttynkkynen@nvidia.com>"); |
| MODULE_DESCRIPTION("cpufreq driver for NVIDIA Tegra124"); |
| MODULE_LICENSE("GPL v2"); |