| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * ichxrom.c |
| * |
| * Normal mappings of chips in physical memory |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/types.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <asm/io.h> |
| #include <linux/mtd/mtd.h> |
| #include <linux/mtd/map.h> |
| #include <linux/mtd/cfi.h> |
| #include <linux/mtd/flashchip.h> |
| #include <linux/pci.h> |
| #include <linux/pci_ids.h> |
| #include <linux/list.h> |
| |
| #define xstr(s) str(s) |
| #define str(s) #s |
| #define MOD_NAME xstr(KBUILD_BASENAME) |
| |
| #define ADDRESS_NAME_LEN 18 |
| |
| #define ROM_PROBE_STEP_SIZE (64*1024) /* 64KiB */ |
| |
| #define BIOS_CNTL 0x4e |
| #define FWH_DEC_EN1 0xE3 |
| #define FWH_DEC_EN2 0xF0 |
| #define FWH_SEL1 0xE8 |
| #define FWH_SEL2 0xEE |
| |
| struct ichxrom_window { |
| void __iomem* virt; |
| unsigned long phys; |
| unsigned long size; |
| struct list_head maps; |
| struct resource rsrc; |
| struct pci_dev *pdev; |
| }; |
| |
| struct ichxrom_map_info { |
| struct list_head list; |
| struct map_info map; |
| struct mtd_info *mtd; |
| struct resource rsrc; |
| char map_name[sizeof(MOD_NAME) + 2 + ADDRESS_NAME_LEN]; |
| }; |
| |
| static struct ichxrom_window ichxrom_window = { |
| .maps = LIST_HEAD_INIT(ichxrom_window.maps), |
| }; |
| |
| static void ichxrom_cleanup(struct ichxrom_window *window) |
| { |
| struct ichxrom_map_info *map, *scratch; |
| u16 word; |
| int ret; |
| |
| /* Disable writes through the rom window */ |
| ret = pci_read_config_word(window->pdev, BIOS_CNTL, &word); |
| if (!ret) |
| pci_write_config_word(window->pdev, BIOS_CNTL, word & ~1); |
| pci_dev_put(window->pdev); |
| |
| /* Free all of the mtd devices */ |
| list_for_each_entry_safe(map, scratch, &window->maps, list) { |
| if (map->rsrc.parent) |
| release_resource(&map->rsrc); |
| mtd_device_unregister(map->mtd); |
| map_destroy(map->mtd); |
| list_del(&map->list); |
| kfree(map); |
| } |
| if (window->rsrc.parent) |
| release_resource(&window->rsrc); |
| if (window->virt) { |
| iounmap(window->virt); |
| window->virt = NULL; |
| window->phys = 0; |
| window->size = 0; |
| window->pdev = NULL; |
| } |
| } |
| |
| |
| static int __init ichxrom_init_one(struct pci_dev *pdev, |
| const struct pci_device_id *ent) |
| { |
| static char *rom_probe_types[] = { "cfi_probe", "jedec_probe", NULL }; |
| struct ichxrom_window *window = &ichxrom_window; |
| struct ichxrom_map_info *map = NULL; |
| unsigned long map_top; |
| u8 byte; |
| u16 word; |
| |
| /* For now I just handle the ichx and I assume there |
| * are not a lot of resources up at the top of the address |
| * space. It is possible to handle other devices in the |
| * top 16MB but it is very painful. Also since |
| * you can only really attach a FWH to an ICHX there |
| * a number of simplifications you can make. |
| * |
| * Also you can page firmware hubs if an 8MB window isn't enough |
| * but don't currently handle that case either. |
| */ |
| window->pdev = pdev; |
| |
| /* Find a region continuous to the end of the ROM window */ |
| window->phys = 0; |
| pci_read_config_byte(pdev, FWH_DEC_EN1, &byte); |
| if (byte == 0xff) { |
| window->phys = 0xffc00000; |
| pci_read_config_byte(pdev, FWH_DEC_EN2, &byte); |
| if ((byte & 0x0f) == 0x0f) { |
| window->phys = 0xff400000; |
| } |
| else if ((byte & 0x0e) == 0x0e) { |
| window->phys = 0xff500000; |
| } |
| else if ((byte & 0x0c) == 0x0c) { |
| window->phys = 0xff600000; |
| } |
| else if ((byte & 0x08) == 0x08) { |
| window->phys = 0xff700000; |
| } |
| } |
| else if ((byte & 0xfe) == 0xfe) { |
| window->phys = 0xffc80000; |
| } |
| else if ((byte & 0xfc) == 0xfc) { |
| window->phys = 0xffd00000; |
| } |
| else if ((byte & 0xf8) == 0xf8) { |
| window->phys = 0xffd80000; |
| } |
| else if ((byte & 0xf0) == 0xf0) { |
| window->phys = 0xffe00000; |
| } |
| else if ((byte & 0xe0) == 0xe0) { |
| window->phys = 0xffe80000; |
| } |
| else if ((byte & 0xc0) == 0xc0) { |
| window->phys = 0xfff00000; |
| } |
| else if ((byte & 0x80) == 0x80) { |
| window->phys = 0xfff80000; |
| } |
| |
| if (window->phys == 0) { |
| printk(KERN_ERR MOD_NAME ": Rom window is closed\n"); |
| goto out; |
| } |
| window->phys -= 0x400000UL; |
| window->size = (0xffffffffUL - window->phys) + 1UL; |
| |
| /* Enable writes through the rom window */ |
| pci_read_config_word(pdev, BIOS_CNTL, &word); |
| if (!(word & 1) && (word & (1<<1))) { |
| /* The BIOS will generate an error if I enable |
| * this device, so don't even try. |
| */ |
| printk(KERN_ERR MOD_NAME ": firmware access control, I can't enable writes\n"); |
| goto out; |
| } |
| pci_write_config_word(pdev, BIOS_CNTL, word | 1); |
| |
| /* |
| * Try to reserve the window mem region. If this fails then |
| * it is likely due to the window being "reserved" by the BIOS. |
| */ |
| window->rsrc.name = MOD_NAME; |
| window->rsrc.start = window->phys; |
| window->rsrc.end = window->phys + window->size - 1; |
| window->rsrc.flags = IORESOURCE_MEM | IORESOURCE_BUSY; |
| if (request_resource(&iomem_resource, &window->rsrc)) { |
| window->rsrc.parent = NULL; |
| printk(KERN_DEBUG MOD_NAME ": " |
| "%s(): Unable to register resource %pR - kernel bug?\n", |
| __func__, &window->rsrc); |
| } |
| |
| /* Map the firmware hub into my address space. */ |
| window->virt = ioremap(window->phys, window->size); |
| if (!window->virt) { |
| printk(KERN_ERR MOD_NAME ": ioremap(%08lx, %08lx) failed\n", |
| window->phys, window->size); |
| goto out; |
| } |
| |
| /* Get the first address to look for an rom chip at */ |
| map_top = window->phys; |
| if ((window->phys & 0x3fffff) != 0) { |
| map_top = window->phys + 0x400000; |
| } |
| #if 1 |
| /* The probe sequence run over the firmware hub lock |
| * registers sets them to 0x7 (no access). |
| * Probe at most the last 4M of the address space. |
| */ |
| if (map_top < 0xffc00000) { |
| map_top = 0xffc00000; |
| } |
| #endif |
| /* Loop through and look for rom chips */ |
| while((map_top - 1) < 0xffffffffUL) { |
| struct cfi_private *cfi; |
| unsigned long offset; |
| int i; |
| |
| if (!map) { |
| map = kmalloc(sizeof(*map), GFP_KERNEL); |
| } |
| if (!map) { |
| printk(KERN_ERR MOD_NAME ": kmalloc failed"); |
| goto out; |
| } |
| memset(map, 0, sizeof(*map)); |
| INIT_LIST_HEAD(&map->list); |
| map->map.name = map->map_name; |
| map->map.phys = map_top; |
| offset = map_top - window->phys; |
| map->map.virt = (void __iomem *) |
| (((unsigned long)(window->virt)) + offset); |
| map->map.size = 0xffffffffUL - map_top + 1UL; |
| /* Set the name of the map to the address I am trying */ |
| sprintf(map->map_name, "%s @%08Lx", |
| MOD_NAME, (unsigned long long)map->map.phys); |
| |
| /* Firmware hubs only use vpp when being programmed |
| * in a factory setting. So in-place programming |
| * needs to use a different method. |
| */ |
| for(map->map.bankwidth = 32; map->map.bankwidth; |
| map->map.bankwidth >>= 1) |
| { |
| char **probe_type; |
| /* Skip bankwidths that are not supported */ |
| if (!map_bankwidth_supported(map->map.bankwidth)) |
| continue; |
| |
| /* Setup the map methods */ |
| simple_map_init(&map->map); |
| |
| /* Try all of the probe methods */ |
| probe_type = rom_probe_types; |
| for(; *probe_type; probe_type++) { |
| map->mtd = do_map_probe(*probe_type, &map->map); |
| if (map->mtd) |
| goto found; |
| } |
| } |
| map_top += ROM_PROBE_STEP_SIZE; |
| continue; |
| found: |
| /* Trim the size if we are larger than the map */ |
| if (map->mtd->size > map->map.size) { |
| printk(KERN_WARNING MOD_NAME |
| " rom(%llu) larger than window(%lu). fixing...\n", |
| (unsigned long long)map->mtd->size, map->map.size); |
| map->mtd->size = map->map.size; |
| } |
| if (window->rsrc.parent) { |
| /* |
| * Registering the MTD device in iomem may not be possible |
| * if there is a BIOS "reserved" and BUSY range. If this |
| * fails then continue anyway. |
| */ |
| map->rsrc.name = map->map_name; |
| map->rsrc.start = map->map.phys; |
| map->rsrc.end = map->map.phys + map->mtd->size - 1; |
| map->rsrc.flags = IORESOURCE_MEM | IORESOURCE_BUSY; |
| if (request_resource(&window->rsrc, &map->rsrc)) { |
| printk(KERN_ERR MOD_NAME |
| ": cannot reserve MTD resource\n"); |
| map->rsrc.parent = NULL; |
| } |
| } |
| |
| /* Make the whole region visible in the map */ |
| map->map.virt = window->virt; |
| map->map.phys = window->phys; |
| cfi = map->map.fldrv_priv; |
| for(i = 0; i < cfi->numchips; i++) { |
| cfi->chips[i].start += offset; |
| } |
| |
| /* Now that the mtd devices is complete claim and export it */ |
| map->mtd->owner = THIS_MODULE; |
| if (mtd_device_register(map->mtd, NULL, 0)) { |
| map_destroy(map->mtd); |
| map->mtd = NULL; |
| goto out; |
| } |
| |
| |
| /* Calculate the new value of map_top */ |
| map_top += map->mtd->size; |
| |
| /* File away the map structure */ |
| list_add(&map->list, &window->maps); |
| map = NULL; |
| } |
| |
| out: |
| /* Free any left over map structures */ |
| kfree(map); |
| |
| /* See if I have any map structures */ |
| if (list_empty(&window->maps)) { |
| ichxrom_cleanup(window); |
| return -ENODEV; |
| } |
| return 0; |
| } |
| |
| |
| static void ichxrom_remove_one(struct pci_dev *pdev) |
| { |
| struct ichxrom_window *window = &ichxrom_window; |
| ichxrom_cleanup(window); |
| } |
| |
| static const struct pci_device_id ichxrom_pci_tbl[] = { |
| { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, |
| PCI_ANY_ID, PCI_ANY_ID, }, |
| { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, |
| PCI_ANY_ID, PCI_ANY_ID, }, |
| { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, |
| PCI_ANY_ID, PCI_ANY_ID, }, |
| { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, |
| PCI_ANY_ID, PCI_ANY_ID, }, |
| { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1, |
| PCI_ANY_ID, PCI_ANY_ID, }, |
| { 0, }, |
| }; |
| |
| #if 0 |
| MODULE_DEVICE_TABLE(pci, ichxrom_pci_tbl); |
| |
| static struct pci_driver ichxrom_driver = { |
| .name = MOD_NAME, |
| .id_table = ichxrom_pci_tbl, |
| .probe = ichxrom_init_one, |
| .remove = ichxrom_remove_one, |
| }; |
| #endif |
| |
| static int __init init_ichxrom(void) |
| { |
| struct pci_dev *pdev; |
| const struct pci_device_id *id; |
| |
| pdev = NULL; |
| for (id = ichxrom_pci_tbl; id->vendor; id++) { |
| pdev = pci_get_device(id->vendor, id->device, NULL); |
| if (pdev) { |
| break; |
| } |
| } |
| if (pdev) { |
| return ichxrom_init_one(pdev, &ichxrom_pci_tbl[0]); |
| } |
| return -ENXIO; |
| #if 0 |
| return pci_register_driver(&ichxrom_driver); |
| #endif |
| } |
| |
| static void __exit cleanup_ichxrom(void) |
| { |
| ichxrom_remove_one(ichxrom_window.pdev); |
| } |
| |
| module_init(init_ichxrom); |
| module_exit(cleanup_ichxrom); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Eric Biederman <ebiederman@lnxi.com>"); |
| MODULE_DESCRIPTION("MTD map driver for BIOS chips on the ICHX southbridge"); |