| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (C) ST-Ericsson SA 2010 |
| * |
| * Authors: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson |
| * Bengt Jonsson <bengt.g.jonsson@stericsson.com> for ST-Ericsson |
| * |
| * Power domain regulators on DB8500 |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/err.h> |
| #include <linux/spinlock.h> |
| #include <linux/platform_device.h> |
| #include <linux/mfd/dbx500-prcmu.h> |
| #include <linux/regulator/driver.h> |
| #include <linux/regulator/machine.h> |
| #include <linux/regulator/db8500-prcmu.h> |
| #include <linux/regulator/of_regulator.h> |
| #include <linux/of.h> |
| #include <linux/module.h> |
| #include "dbx500-prcmu.h" |
| |
| static int db8500_regulator_enable(struct regulator_dev *rdev) |
| { |
| struct dbx500_regulator_info *info = rdev_get_drvdata(rdev); |
| |
| if (info == NULL) |
| return -EINVAL; |
| |
| dev_vdbg(rdev_get_dev(rdev), "regulator-%s-enable\n", |
| info->desc.name); |
| |
| if (!info->is_enabled) { |
| info->is_enabled = true; |
| if (!info->exclude_from_power_state) |
| power_state_active_enable(); |
| } |
| |
| return 0; |
| } |
| |
| static int db8500_regulator_disable(struct regulator_dev *rdev) |
| { |
| struct dbx500_regulator_info *info = rdev_get_drvdata(rdev); |
| int ret = 0; |
| |
| if (info == NULL) |
| return -EINVAL; |
| |
| dev_vdbg(rdev_get_dev(rdev), "regulator-%s-disable\n", |
| info->desc.name); |
| |
| if (info->is_enabled) { |
| info->is_enabled = false; |
| if (!info->exclude_from_power_state) |
| ret = power_state_active_disable(); |
| } |
| |
| return ret; |
| } |
| |
| static int db8500_regulator_is_enabled(struct regulator_dev *rdev) |
| { |
| struct dbx500_regulator_info *info = rdev_get_drvdata(rdev); |
| |
| if (info == NULL) |
| return -EINVAL; |
| |
| dev_vdbg(rdev_get_dev(rdev), "regulator-%s-is_enabled (is_enabled):" |
| " %i\n", info->desc.name, info->is_enabled); |
| |
| return info->is_enabled; |
| } |
| |
| /* db8500 regulator operations */ |
| static const struct regulator_ops db8500_regulator_ops = { |
| .enable = db8500_regulator_enable, |
| .disable = db8500_regulator_disable, |
| .is_enabled = db8500_regulator_is_enabled, |
| }; |
| |
| /* |
| * EPOD control |
| */ |
| static bool epod_on[NUM_EPOD_ID]; |
| static bool epod_ramret[NUM_EPOD_ID]; |
| |
| static int enable_epod(u16 epod_id, bool ramret) |
| { |
| int ret; |
| |
| if (ramret) { |
| if (!epod_on[epod_id]) { |
| ret = prcmu_set_epod(epod_id, EPOD_STATE_RAMRET); |
| if (ret < 0) |
| return ret; |
| } |
| epod_ramret[epod_id] = true; |
| } else { |
| ret = prcmu_set_epod(epod_id, EPOD_STATE_ON); |
| if (ret < 0) |
| return ret; |
| epod_on[epod_id] = true; |
| } |
| |
| return 0; |
| } |
| |
| static int disable_epod(u16 epod_id, bool ramret) |
| { |
| int ret; |
| |
| if (ramret) { |
| if (!epod_on[epod_id]) { |
| ret = prcmu_set_epod(epod_id, EPOD_STATE_OFF); |
| if (ret < 0) |
| return ret; |
| } |
| epod_ramret[epod_id] = false; |
| } else { |
| if (epod_ramret[epod_id]) { |
| ret = prcmu_set_epod(epod_id, EPOD_STATE_RAMRET); |
| if (ret < 0) |
| return ret; |
| } else { |
| ret = prcmu_set_epod(epod_id, EPOD_STATE_OFF); |
| if (ret < 0) |
| return ret; |
| } |
| epod_on[epod_id] = false; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Regulator switch |
| */ |
| static int db8500_regulator_switch_enable(struct regulator_dev *rdev) |
| { |
| struct dbx500_regulator_info *info = rdev_get_drvdata(rdev); |
| int ret; |
| |
| if (info == NULL) |
| return -EINVAL; |
| |
| dev_vdbg(rdev_get_dev(rdev), "regulator-switch-%s-enable\n", |
| info->desc.name); |
| |
| ret = enable_epod(info->epod_id, info->is_ramret); |
| if (ret < 0) { |
| dev_err(rdev_get_dev(rdev), |
| "regulator-switch-%s-enable: prcmu call failed\n", |
| info->desc.name); |
| goto out; |
| } |
| |
| info->is_enabled = true; |
| out: |
| return ret; |
| } |
| |
| static int db8500_regulator_switch_disable(struct regulator_dev *rdev) |
| { |
| struct dbx500_regulator_info *info = rdev_get_drvdata(rdev); |
| int ret; |
| |
| if (info == NULL) |
| return -EINVAL; |
| |
| dev_vdbg(rdev_get_dev(rdev), "regulator-switch-%s-disable\n", |
| info->desc.name); |
| |
| ret = disable_epod(info->epod_id, info->is_ramret); |
| if (ret < 0) { |
| dev_err(rdev_get_dev(rdev), |
| "regulator_switch-%s-disable: prcmu call failed\n", |
| info->desc.name); |
| goto out; |
| } |
| |
| info->is_enabled = false; |
| out: |
| return ret; |
| } |
| |
| static int db8500_regulator_switch_is_enabled(struct regulator_dev *rdev) |
| { |
| struct dbx500_regulator_info *info = rdev_get_drvdata(rdev); |
| |
| if (info == NULL) |
| return -EINVAL; |
| |
| dev_vdbg(rdev_get_dev(rdev), |
| "regulator-switch-%s-is_enabled (is_enabled): %i\n", |
| info->desc.name, info->is_enabled); |
| |
| return info->is_enabled; |
| } |
| |
| static const struct regulator_ops db8500_regulator_switch_ops = { |
| .enable = db8500_regulator_switch_enable, |
| .disable = db8500_regulator_switch_disable, |
| .is_enabled = db8500_regulator_switch_is_enabled, |
| }; |
| |
| /* |
| * Regulator information |
| */ |
| static struct dbx500_regulator_info |
| dbx500_regulator_info[DB8500_NUM_REGULATORS] = { |
| [DB8500_REGULATOR_VAPE] = { |
| .desc = { |
| .name = "db8500-vape", |
| .of_match = of_match_ptr("db8500_vape"), |
| .id = DB8500_REGULATOR_VAPE, |
| .ops = &db8500_regulator_ops, |
| .type = REGULATOR_VOLTAGE, |
| .owner = THIS_MODULE, |
| }, |
| }, |
| [DB8500_REGULATOR_VARM] = { |
| .desc = { |
| .name = "db8500-varm", |
| .of_match = of_match_ptr("db8500_varm"), |
| .id = DB8500_REGULATOR_VARM, |
| .ops = &db8500_regulator_ops, |
| .type = REGULATOR_VOLTAGE, |
| .owner = THIS_MODULE, |
| }, |
| }, |
| [DB8500_REGULATOR_VMODEM] = { |
| .desc = { |
| .name = "db8500-vmodem", |
| .of_match = of_match_ptr("db8500_vmodem"), |
| .id = DB8500_REGULATOR_VMODEM, |
| .ops = &db8500_regulator_ops, |
| .type = REGULATOR_VOLTAGE, |
| .owner = THIS_MODULE, |
| }, |
| }, |
| [DB8500_REGULATOR_VPLL] = { |
| .desc = { |
| .name = "db8500-vpll", |
| .of_match = of_match_ptr("db8500_vpll"), |
| .id = DB8500_REGULATOR_VPLL, |
| .ops = &db8500_regulator_ops, |
| .type = REGULATOR_VOLTAGE, |
| .owner = THIS_MODULE, |
| }, |
| }, |
| [DB8500_REGULATOR_VSMPS1] = { |
| .desc = { |
| .name = "db8500-vsmps1", |
| .of_match = of_match_ptr("db8500_vsmps1"), |
| .id = DB8500_REGULATOR_VSMPS1, |
| .ops = &db8500_regulator_ops, |
| .type = REGULATOR_VOLTAGE, |
| .owner = THIS_MODULE, |
| }, |
| }, |
| [DB8500_REGULATOR_VSMPS2] = { |
| .desc = { |
| .name = "db8500-vsmps2", |
| .of_match = of_match_ptr("db8500_vsmps2"), |
| .id = DB8500_REGULATOR_VSMPS2, |
| .ops = &db8500_regulator_ops, |
| .type = REGULATOR_VOLTAGE, |
| .owner = THIS_MODULE, |
| .fixed_uV = 1800000, |
| .n_voltages = 1, |
| }, |
| .exclude_from_power_state = true, |
| }, |
| [DB8500_REGULATOR_VSMPS3] = { |
| .desc = { |
| .name = "db8500-vsmps3", |
| .of_match = of_match_ptr("db8500_vsmps3"), |
| .id = DB8500_REGULATOR_VSMPS3, |
| .ops = &db8500_regulator_ops, |
| .type = REGULATOR_VOLTAGE, |
| .owner = THIS_MODULE, |
| }, |
| }, |
| [DB8500_REGULATOR_VRF1] = { |
| .desc = { |
| .name = "db8500-vrf1", |
| .of_match = of_match_ptr("db8500_vrf1"), |
| .id = DB8500_REGULATOR_VRF1, |
| .ops = &db8500_regulator_ops, |
| .type = REGULATOR_VOLTAGE, |
| .owner = THIS_MODULE, |
| }, |
| }, |
| [DB8500_REGULATOR_SWITCH_SVAMMDSP] = { |
| .desc = { |
| .name = "db8500-sva-mmdsp", |
| .of_match = of_match_ptr("db8500_sva_mmdsp"), |
| .id = DB8500_REGULATOR_SWITCH_SVAMMDSP, |
| .ops = &db8500_regulator_switch_ops, |
| .type = REGULATOR_VOLTAGE, |
| .owner = THIS_MODULE, |
| }, |
| .epod_id = EPOD_ID_SVAMMDSP, |
| }, |
| [DB8500_REGULATOR_SWITCH_SVAMMDSPRET] = { |
| .desc = { |
| .name = "db8500-sva-mmdsp-ret", |
| .of_match = of_match_ptr("db8500_sva_mmdsp_ret"), |
| .id = DB8500_REGULATOR_SWITCH_SVAMMDSPRET, |
| .ops = &db8500_regulator_switch_ops, |
| .type = REGULATOR_VOLTAGE, |
| .owner = THIS_MODULE, |
| }, |
| .epod_id = EPOD_ID_SVAMMDSP, |
| .is_ramret = true, |
| }, |
| [DB8500_REGULATOR_SWITCH_SVAPIPE] = { |
| .desc = { |
| .name = "db8500-sva-pipe", |
| .of_match = of_match_ptr("db8500_sva_pipe"), |
| .id = DB8500_REGULATOR_SWITCH_SVAPIPE, |
| .ops = &db8500_regulator_switch_ops, |
| .type = REGULATOR_VOLTAGE, |
| .owner = THIS_MODULE, |
| }, |
| .epod_id = EPOD_ID_SVAPIPE, |
| }, |
| [DB8500_REGULATOR_SWITCH_SIAMMDSP] = { |
| .desc = { |
| .name = "db8500-sia-mmdsp", |
| .of_match = of_match_ptr("db8500_sia_mmdsp"), |
| .id = DB8500_REGULATOR_SWITCH_SIAMMDSP, |
| .ops = &db8500_regulator_switch_ops, |
| .type = REGULATOR_VOLTAGE, |
| .owner = THIS_MODULE, |
| }, |
| .epod_id = EPOD_ID_SIAMMDSP, |
| }, |
| [DB8500_REGULATOR_SWITCH_SIAMMDSPRET] = { |
| .desc = { |
| .name = "db8500-sia-mmdsp-ret", |
| .of_match = of_match_ptr("db8500_sia_mmdsp_ret"), |
| .id = DB8500_REGULATOR_SWITCH_SIAMMDSPRET, |
| .ops = &db8500_regulator_switch_ops, |
| .type = REGULATOR_VOLTAGE, |
| .owner = THIS_MODULE, |
| }, |
| .epod_id = EPOD_ID_SIAMMDSP, |
| .is_ramret = true, |
| }, |
| [DB8500_REGULATOR_SWITCH_SIAPIPE] = { |
| .desc = { |
| .name = "db8500-sia-pipe", |
| .of_match = of_match_ptr("db8500_sia_pipe"), |
| .id = DB8500_REGULATOR_SWITCH_SIAPIPE, |
| .ops = &db8500_regulator_switch_ops, |
| .type = REGULATOR_VOLTAGE, |
| .owner = THIS_MODULE, |
| }, |
| .epod_id = EPOD_ID_SIAPIPE, |
| }, |
| [DB8500_REGULATOR_SWITCH_SGA] = { |
| .desc = { |
| .name = "db8500-sga", |
| .of_match = of_match_ptr("db8500_sga"), |
| .id = DB8500_REGULATOR_SWITCH_SGA, |
| .ops = &db8500_regulator_switch_ops, |
| .type = REGULATOR_VOLTAGE, |
| .owner = THIS_MODULE, |
| }, |
| .epod_id = EPOD_ID_SGA, |
| }, |
| [DB8500_REGULATOR_SWITCH_B2R2_MCDE] = { |
| .desc = { |
| .name = "db8500-b2r2-mcde", |
| .of_match = of_match_ptr("db8500_b2r2_mcde"), |
| .id = DB8500_REGULATOR_SWITCH_B2R2_MCDE, |
| .ops = &db8500_regulator_switch_ops, |
| .type = REGULATOR_VOLTAGE, |
| .owner = THIS_MODULE, |
| }, |
| .epod_id = EPOD_ID_B2R2_MCDE, |
| }, |
| [DB8500_REGULATOR_SWITCH_ESRAM12] = { |
| .desc = { |
| .name = "db8500-esram12", |
| .of_match = of_match_ptr("db8500_esram12"), |
| .id = DB8500_REGULATOR_SWITCH_ESRAM12, |
| .ops = &db8500_regulator_switch_ops, |
| .type = REGULATOR_VOLTAGE, |
| .owner = THIS_MODULE, |
| }, |
| .epod_id = EPOD_ID_ESRAM12, |
| .is_enabled = true, |
| }, |
| [DB8500_REGULATOR_SWITCH_ESRAM12RET] = { |
| .desc = { |
| .name = "db8500-esram12-ret", |
| .of_match = of_match_ptr("db8500_esram12_ret"), |
| .id = DB8500_REGULATOR_SWITCH_ESRAM12RET, |
| .ops = &db8500_regulator_switch_ops, |
| .type = REGULATOR_VOLTAGE, |
| .owner = THIS_MODULE, |
| }, |
| .epod_id = EPOD_ID_ESRAM12, |
| .is_ramret = true, |
| }, |
| [DB8500_REGULATOR_SWITCH_ESRAM34] = { |
| .desc = { |
| .name = "db8500-esram34", |
| .of_match = of_match_ptr("db8500_esram34"), |
| .id = DB8500_REGULATOR_SWITCH_ESRAM34, |
| .ops = &db8500_regulator_switch_ops, |
| .type = REGULATOR_VOLTAGE, |
| .owner = THIS_MODULE, |
| }, |
| .epod_id = EPOD_ID_ESRAM34, |
| .is_enabled = true, |
| }, |
| [DB8500_REGULATOR_SWITCH_ESRAM34RET] = { |
| .desc = { |
| .name = "db8500-esram34-ret", |
| .of_match = of_match_ptr("db8500_esram34_ret"), |
| .id = DB8500_REGULATOR_SWITCH_ESRAM34RET, |
| .ops = &db8500_regulator_switch_ops, |
| .type = REGULATOR_VOLTAGE, |
| .owner = THIS_MODULE, |
| }, |
| .epod_id = EPOD_ID_ESRAM34, |
| .is_ramret = true, |
| }, |
| }; |
| |
| static int db8500_regulator_probe(struct platform_device *pdev) |
| { |
| struct regulator_init_data *db8500_init_data; |
| struct dbx500_regulator_info *info; |
| struct regulator_config config = { }; |
| struct regulator_dev *rdev; |
| int err, i; |
| |
| db8500_init_data = dev_get_platdata(&pdev->dev); |
| |
| for (i = 0; i < ARRAY_SIZE(dbx500_regulator_info); i++) { |
| /* assign per-regulator data */ |
| info = &dbx500_regulator_info[i]; |
| |
| config.driver_data = info; |
| config.dev = &pdev->dev; |
| if (db8500_init_data) |
| config.init_data = &db8500_init_data[i]; |
| |
| rdev = devm_regulator_register(&pdev->dev, &info->desc, |
| &config); |
| if (IS_ERR(rdev)) { |
| err = PTR_ERR(rdev); |
| dev_err(&pdev->dev, "failed to register %s: err %i\n", |
| info->desc.name, err); |
| return err; |
| } |
| dev_dbg(&pdev->dev, "regulator-%s-probed\n", info->desc.name); |
| } |
| |
| ux500_regulator_debug_init(pdev, dbx500_regulator_info, |
| ARRAY_SIZE(dbx500_regulator_info)); |
| return 0; |
| } |
| |
| static int db8500_regulator_remove(struct platform_device *pdev) |
| { |
| ux500_regulator_debug_exit(); |
| |
| return 0; |
| } |
| |
| static struct platform_driver db8500_regulator_driver = { |
| .driver = { |
| .name = "db8500-prcmu-regulators", |
| }, |
| .probe = db8500_regulator_probe, |
| .remove = db8500_regulator_remove, |
| }; |
| |
| static int __init db8500_regulator_init(void) |
| { |
| return platform_driver_register(&db8500_regulator_driver); |
| } |
| |
| static void __exit db8500_regulator_exit(void) |
| { |
| platform_driver_unregister(&db8500_regulator_driver); |
| } |
| |
| arch_initcall(db8500_regulator_init); |
| module_exit(db8500_regulator_exit); |
| |
| MODULE_AUTHOR("STMicroelectronics/ST-Ericsson"); |
| MODULE_DESCRIPTION("DB8500 regulator driver"); |
| MODULE_LICENSE("GPL v2"); |
