| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved. |
| */ |
| |
| /** |
| * DOC: Sample flow of using the ioctl interface provided by the Nitro Enclaves (NE) |
| * kernel driver. |
| * |
| * Usage |
| * ----- |
| * |
| * Load the nitro_enclaves module, setting also the enclave CPU pool. The |
| * enclave CPUs need to be full cores from the same NUMA node. CPU 0 and its |
| * siblings have to remain available for the primary / parent VM, so they |
| * cannot be included in the enclave CPU pool. |
| * |
| * See the cpu list section from the kernel documentation. |
| * https://www.kernel.org/doc/html/latest/admin-guide/kernel-parameters.html#cpu-lists |
| * |
| * insmod drivers/virt/nitro_enclaves/nitro_enclaves.ko |
| * lsmod |
| * |
| * The CPU pool can be set at runtime, after the kernel module is loaded. |
| * |
| * echo <cpu-list> > /sys/module/nitro_enclaves/parameters/ne_cpus |
| * |
| * NUMA and CPU siblings information can be found using: |
| * |
| * lscpu |
| * /proc/cpuinfo |
| * |
| * Check the online / offline CPU list. The CPUs from the pool should be |
| * offlined. |
| * |
| * lscpu |
| * |
| * Check dmesg for any warnings / errors through the NE driver lifetime / usage. |
| * The NE logs contain the "nitro_enclaves" or "pci 0000:00:02.0" pattern. |
| * |
| * dmesg |
| * |
| * Setup hugetlbfs huge pages. The memory needs to be from the same NUMA node as |
| * the enclave CPUs. |
| * |
| * https://www.kernel.org/doc/html/latest/admin-guide/mm/hugetlbpage.html |
| * |
| * By default, the allocation of hugetlb pages are distributed on all possible |
| * NUMA nodes. Use the following configuration files to set the number of huge |
| * pages from a NUMA node: |
| * |
| * /sys/devices/system/node/node<X>/hugepages/hugepages-2048kB/nr_hugepages |
| * /sys/devices/system/node/node<X>/hugepages/hugepages-1048576kB/nr_hugepages |
| * |
| * or, if not on a system with multiple NUMA nodes, can also set the number |
| * of 2 MiB / 1 GiB huge pages using |
| * |
| * /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages |
| * /sys/kernel/mm/hugepages/hugepages-1048576kB/nr_hugepages |
| * |
| * In this example 256 hugepages of 2 MiB are used. |
| * |
| * Build and run the NE sample. |
| * |
| * make -C samples/nitro_enclaves clean |
| * make -C samples/nitro_enclaves |
| * ./samples/nitro_enclaves/ne_ioctl_sample <path_to_enclave_image> |
| * |
| * Unload the nitro_enclaves module. |
| * |
| * rmmod nitro_enclaves |
| * lsmod |
| */ |
| |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <errno.h> |
| #include <fcntl.h> |
| #include <limits.h> |
| #include <poll.h> |
| #include <pthread.h> |
| #include <string.h> |
| #include <sys/eventfd.h> |
| #include <sys/ioctl.h> |
| #include <sys/mman.h> |
| #include <sys/socket.h> |
| #include <sys/stat.h> |
| #include <sys/types.h> |
| #include <unistd.h> |
| |
| #include <linux/mman.h> |
| #include <linux/nitro_enclaves.h> |
| #include <linux/vm_sockets.h> |
| |
| /** |
| * NE_DEV_NAME - Nitro Enclaves (NE) misc device that provides the ioctl interface. |
| */ |
| #define NE_DEV_NAME "/dev/nitro_enclaves" |
| |
| /** |
| * NE_POLL_WAIT_TIME - Timeout in seconds for each poll event. |
| */ |
| #define NE_POLL_WAIT_TIME (60) |
| /** |
| * NE_POLL_WAIT_TIME_MS - Timeout in milliseconds for each poll event. |
| */ |
| #define NE_POLL_WAIT_TIME_MS (NE_POLL_WAIT_TIME * 1000) |
| |
| /** |
| * NE_SLEEP_TIME - Amount of time in seconds for the process to keep the enclave alive. |
| */ |
| #define NE_SLEEP_TIME (300) |
| |
| /** |
| * NE_DEFAULT_NR_VCPUS - Default number of vCPUs set for an enclave. |
| */ |
| #define NE_DEFAULT_NR_VCPUS (2) |
| |
| /** |
| * NE_MIN_MEM_REGION_SIZE - Minimum size of a memory region - 2 MiB. |
| */ |
| #define NE_MIN_MEM_REGION_SIZE (2 * 1024 * 1024) |
| |
| /** |
| * NE_DEFAULT_NR_MEM_REGIONS - Default number of memory regions of 2 MiB set for |
| * an enclave. |
| */ |
| #define NE_DEFAULT_NR_MEM_REGIONS (256) |
| |
| /** |
| * NE_IMAGE_LOAD_HEARTBEAT_CID - Vsock CID for enclave image loading heartbeat logic. |
| */ |
| #define NE_IMAGE_LOAD_HEARTBEAT_CID (3) |
| /** |
| * NE_IMAGE_LOAD_HEARTBEAT_PORT - Vsock port for enclave image loading heartbeat logic. |
| */ |
| #define NE_IMAGE_LOAD_HEARTBEAT_PORT (9000) |
| /** |
| * NE_IMAGE_LOAD_HEARTBEAT_VALUE - Heartbeat value for enclave image loading. |
| */ |
| #define NE_IMAGE_LOAD_HEARTBEAT_VALUE (0xb7) |
| |
| /** |
| * struct ne_user_mem_region - User space memory region set for an enclave. |
| * @userspace_addr: Address of the user space memory region. |
| * @memory_size: Size of the user space memory region. |
| */ |
| struct ne_user_mem_region { |
| void *userspace_addr; |
| size_t memory_size; |
| }; |
| |
| /** |
| * ne_create_vm() - Create a slot for the enclave VM. |
| * @ne_dev_fd: The file descriptor of the NE misc device. |
| * @slot_uid: The generated slot uid for the enclave. |
| * @enclave_fd : The generated file descriptor for the enclave. |
| * |
| * Context: Process context. |
| * Return: |
| * * 0 on success. |
| * * Negative return value on failure. |
| */ |
| static int ne_create_vm(int ne_dev_fd, unsigned long *slot_uid, int *enclave_fd) |
| { |
| int rc = -EINVAL; |
| *enclave_fd = ioctl(ne_dev_fd, NE_CREATE_VM, slot_uid); |
| |
| if (*enclave_fd < 0) { |
| rc = *enclave_fd; |
| switch (errno) { |
| case NE_ERR_NO_CPUS_AVAIL_IN_POOL: { |
| printf("Error in create VM, no CPUs available in the NE CPU pool\n"); |
| |
| break; |
| } |
| |
| default: |
| printf("Error in create VM [%m]\n"); |
| } |
| |
| return rc; |
| } |
| |
| return 0; |
| } |
| |
| |
| /** |
| * ne_poll_enclave_fd() - Thread function for polling the enclave fd. |
| * @data: Argument provided for the polling function. |
| * |
| * Context: Process context. |
| * Return: |
| * * NULL on success / failure. |
| */ |
| void *ne_poll_enclave_fd(void *data) |
| { |
| int enclave_fd = *(int *)data; |
| struct pollfd fds[1] = {}; |
| int i = 0; |
| int rc = -EINVAL; |
| |
| printf("Running from poll thread, enclave fd %d\n", enclave_fd); |
| |
| fds[0].fd = enclave_fd; |
| fds[0].events = POLLIN | POLLERR | POLLHUP; |
| |
| /* Keep on polling until the current process is terminated. */ |
| while (1) { |
| printf("[iter %d] Polling ...\n", i); |
| |
| rc = poll(fds, 1, NE_POLL_WAIT_TIME_MS); |
| if (rc < 0) { |
| printf("Error in poll [%m]\n"); |
| |
| return NULL; |
| } |
| |
| i++; |
| |
| if (!rc) { |
| printf("Poll: %d seconds elapsed\n", |
| i * NE_POLL_WAIT_TIME); |
| |
| continue; |
| } |
| |
| printf("Poll received value 0x%x\n", fds[0].revents); |
| |
| if (fds[0].revents & POLLHUP) { |
| printf("Received POLLHUP\n"); |
| |
| return NULL; |
| } |
| |
| if (fds[0].revents & POLLNVAL) { |
| printf("Received POLLNVAL\n"); |
| |
| return NULL; |
| } |
| } |
| |
| return NULL; |
| } |
| |
| /** |
| * ne_alloc_user_mem_region() - Allocate a user space memory region for an enclave. |
| * @ne_user_mem_region: User space memory region allocated using hugetlbfs. |
| * |
| * Context: Process context. |
| * Return: |
| * * 0 on success. |
| * * Negative return value on failure. |
| */ |
| static int ne_alloc_user_mem_region(struct ne_user_mem_region *ne_user_mem_region) |
| { |
| /** |
| * Check available hugetlb encodings for different huge page sizes in |
| * include/uapi/linux/mman.h. |
| */ |
| ne_user_mem_region->userspace_addr = mmap(NULL, ne_user_mem_region->memory_size, |
| PROT_READ | PROT_WRITE, |
| MAP_PRIVATE | MAP_ANONYMOUS | |
| MAP_HUGETLB | MAP_HUGE_2MB, -1, 0); |
| if (ne_user_mem_region->userspace_addr == MAP_FAILED) { |
| printf("Error in mmap memory [%m]\n"); |
| |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * ne_load_enclave_image() - Place the enclave image in the enclave memory. |
| * @enclave_fd : The file descriptor associated with the enclave. |
| * @ne_user_mem_regions: User space memory regions allocated for the enclave. |
| * @enclave_image_path : The file path of the enclave image. |
| * |
| * Context: Process context. |
| * Return: |
| * * 0 on success. |
| * * Negative return value on failure. |
| */ |
| static int ne_load_enclave_image(int enclave_fd, struct ne_user_mem_region ne_user_mem_regions[], |
| char *enclave_image_path) |
| { |
| unsigned char *enclave_image = NULL; |
| int enclave_image_fd = -1; |
| size_t enclave_image_size = 0; |
| size_t enclave_memory_size = 0; |
| unsigned long i = 0; |
| size_t image_written_bytes = 0; |
| struct ne_image_load_info image_load_info = { |
| .flags = NE_EIF_IMAGE, |
| }; |
| struct stat image_stat_buf = {}; |
| int rc = -EINVAL; |
| size_t temp_image_offset = 0; |
| |
| for (i = 0; i < NE_DEFAULT_NR_MEM_REGIONS; i++) |
| enclave_memory_size += ne_user_mem_regions[i].memory_size; |
| |
| rc = stat(enclave_image_path, &image_stat_buf); |
| if (rc < 0) { |
| printf("Error in get image stat info [%m]\n"); |
| |
| return rc; |
| } |
| |
| enclave_image_size = image_stat_buf.st_size; |
| |
| if (enclave_memory_size < enclave_image_size) { |
| printf("The enclave memory is smaller than the enclave image size\n"); |
| |
| return -ENOMEM; |
| } |
| |
| rc = ioctl(enclave_fd, NE_GET_IMAGE_LOAD_INFO, &image_load_info); |
| if (rc < 0) { |
| switch (errno) { |
| case NE_ERR_NOT_IN_INIT_STATE: { |
| printf("Error in get image load info, enclave not in init state\n"); |
| |
| break; |
| } |
| |
| case NE_ERR_INVALID_FLAG_VALUE: { |
| printf("Error in get image load info, provided invalid flag\n"); |
| |
| break; |
| } |
| |
| default: |
| printf("Error in get image load info [%m]\n"); |
| } |
| |
| return rc; |
| } |
| |
| printf("Enclave image offset in enclave memory is %lld\n", |
| image_load_info.memory_offset); |
| |
| enclave_image_fd = open(enclave_image_path, O_RDONLY); |
| if (enclave_image_fd < 0) { |
| printf("Error in open enclave image file [%m]\n"); |
| |
| return enclave_image_fd; |
| } |
| |
| enclave_image = mmap(NULL, enclave_image_size, PROT_READ, |
| MAP_PRIVATE, enclave_image_fd, 0); |
| if (enclave_image == MAP_FAILED) { |
| printf("Error in mmap enclave image [%m]\n"); |
| |
| return -1; |
| } |
| |
| temp_image_offset = image_load_info.memory_offset; |
| |
| for (i = 0; i < NE_DEFAULT_NR_MEM_REGIONS; i++) { |
| size_t bytes_to_write = 0; |
| size_t memory_offset = 0; |
| size_t memory_size = ne_user_mem_regions[i].memory_size; |
| size_t remaining_bytes = 0; |
| void *userspace_addr = ne_user_mem_regions[i].userspace_addr; |
| |
| if (temp_image_offset >= memory_size) { |
| temp_image_offset -= memory_size; |
| |
| continue; |
| } else if (temp_image_offset != 0) { |
| memory_offset = temp_image_offset; |
| memory_size -= temp_image_offset; |
| temp_image_offset = 0; |
| } |
| |
| remaining_bytes = enclave_image_size - image_written_bytes; |
| bytes_to_write = memory_size < remaining_bytes ? |
| memory_size : remaining_bytes; |
| |
| memcpy(userspace_addr + memory_offset, |
| enclave_image + image_written_bytes, bytes_to_write); |
| |
| image_written_bytes += bytes_to_write; |
| |
| if (image_written_bytes == enclave_image_size) |
| break; |
| } |
| |
| munmap(enclave_image, enclave_image_size); |
| |
| close(enclave_image_fd); |
| |
| return 0; |
| } |
| |
| /** |
| * ne_set_user_mem_region() - Set a user space memory region for the given enclave. |
| * @enclave_fd : The file descriptor associated with the enclave. |
| * @ne_user_mem_region : User space memory region to be set for the enclave. |
| * |
| * Context: Process context. |
| * Return: |
| * * 0 on success. |
| * * Negative return value on failure. |
| */ |
| static int ne_set_user_mem_region(int enclave_fd, struct ne_user_mem_region ne_user_mem_region) |
| { |
| struct ne_user_memory_region mem_region = { |
| .flags = NE_DEFAULT_MEMORY_REGION, |
| .memory_size = ne_user_mem_region.memory_size, |
| .userspace_addr = (__u64)ne_user_mem_region.userspace_addr, |
| }; |
| int rc = -EINVAL; |
| |
| rc = ioctl(enclave_fd, NE_SET_USER_MEMORY_REGION, &mem_region); |
| if (rc < 0) { |
| switch (errno) { |
| case NE_ERR_NOT_IN_INIT_STATE: { |
| printf("Error in set user memory region, enclave not in init state\n"); |
| |
| break; |
| } |
| |
| case NE_ERR_INVALID_MEM_REGION_SIZE: { |
| printf("Error in set user memory region, mem size not multiple of 2 MiB\n"); |
| |
| break; |
| } |
| |
| case NE_ERR_INVALID_MEM_REGION_ADDR: { |
| printf("Error in set user memory region, invalid user space address\n"); |
| |
| break; |
| } |
| |
| case NE_ERR_UNALIGNED_MEM_REGION_ADDR: { |
| printf("Error in set user memory region, unaligned user space address\n"); |
| |
| break; |
| } |
| |
| case NE_ERR_MEM_REGION_ALREADY_USED: { |
| printf("Error in set user memory region, memory region already used\n"); |
| |
| break; |
| } |
| |
| case NE_ERR_MEM_NOT_HUGE_PAGE: { |
| printf("Error in set user memory region, not backed by huge pages\n"); |
| |
| break; |
| } |
| |
| case NE_ERR_MEM_DIFFERENT_NUMA_NODE: { |
| printf("Error in set user memory region, different NUMA node than CPUs\n"); |
| |
| break; |
| } |
| |
| case NE_ERR_MEM_MAX_REGIONS: { |
| printf("Error in set user memory region, max memory regions reached\n"); |
| |
| break; |
| } |
| |
| case NE_ERR_INVALID_PAGE_SIZE: { |
| printf("Error in set user memory region, has page not multiple of 2 MiB\n"); |
| |
| break; |
| } |
| |
| case NE_ERR_INVALID_FLAG_VALUE: { |
| printf("Error in set user memory region, provided invalid flag\n"); |
| |
| break; |
| } |
| |
| default: |
| printf("Error in set user memory region [%m]\n"); |
| } |
| |
| return rc; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * ne_free_mem_regions() - Unmap all the user space memory regions that were set |
| * aside for the enclave. |
| * @ne_user_mem_regions: The user space memory regions associated with an enclave. |
| * |
| * Context: Process context. |
| */ |
| static void ne_free_mem_regions(struct ne_user_mem_region ne_user_mem_regions[]) |
| { |
| unsigned int i = 0; |
| |
| for (i = 0; i < NE_DEFAULT_NR_MEM_REGIONS; i++) |
| munmap(ne_user_mem_regions[i].userspace_addr, |
| ne_user_mem_regions[i].memory_size); |
| } |
| |
| /** |
| * ne_add_vcpu() - Add a vCPU to the given enclave. |
| * @enclave_fd : The file descriptor associated with the enclave. |
| * @vcpu_id: vCPU id to be set for the enclave, either provided or |
| * auto-generated (if provided vCPU id is 0). |
| * |
| * Context: Process context. |
| * Return: |
| * * 0 on success. |
| * * Negative return value on failure. |
| */ |
| static int ne_add_vcpu(int enclave_fd, unsigned int *vcpu_id) |
| { |
| int rc = -EINVAL; |
| |
| rc = ioctl(enclave_fd, NE_ADD_VCPU, vcpu_id); |
| if (rc < 0) { |
| switch (errno) { |
| case NE_ERR_NO_CPUS_AVAIL_IN_POOL: { |
| printf("Error in add vcpu, no CPUs available in the NE CPU pool\n"); |
| |
| break; |
| } |
| |
| case NE_ERR_VCPU_ALREADY_USED: { |
| printf("Error in add vcpu, the provided vCPU is already used\n"); |
| |
| break; |
| } |
| |
| case NE_ERR_VCPU_NOT_IN_CPU_POOL: { |
| printf("Error in add vcpu, the provided vCPU is not in the NE CPU pool\n"); |
| |
| break; |
| } |
| |
| case NE_ERR_VCPU_INVALID_CPU_CORE: { |
| printf("Error in add vcpu, the core id of the provided vCPU is invalid\n"); |
| |
| break; |
| } |
| |
| case NE_ERR_NOT_IN_INIT_STATE: { |
| printf("Error in add vcpu, enclave not in init state\n"); |
| |
| break; |
| } |
| |
| case NE_ERR_INVALID_VCPU: { |
| printf("Error in add vcpu, the provided vCPU is out of avail CPUs range\n"); |
| |
| break; |
| } |
| |
| default: |
| printf("Error in add vcpu [%m]\n"); |
| |
| } |
| return rc; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * ne_start_enclave() - Start the given enclave. |
| * @enclave_fd : The file descriptor associated with the enclave. |
| * @enclave_start_info : Enclave metadata used for starting e.g. vsock CID. |
| * |
| * Context: Process context. |
| * Return: |
| * * 0 on success. |
| * * Negative return value on failure. |
| */ |
| static int ne_start_enclave(int enclave_fd, struct ne_enclave_start_info *enclave_start_info) |
| { |
| int rc = -EINVAL; |
| |
| rc = ioctl(enclave_fd, NE_START_ENCLAVE, enclave_start_info); |
| if (rc < 0) { |
| switch (errno) { |
| case NE_ERR_NOT_IN_INIT_STATE: { |
| printf("Error in start enclave, enclave not in init state\n"); |
| |
| break; |
| } |
| |
| case NE_ERR_NO_MEM_REGIONS_ADDED: { |
| printf("Error in start enclave, no memory regions have been added\n"); |
| |
| break; |
| } |
| |
| case NE_ERR_NO_VCPUS_ADDED: { |
| printf("Error in start enclave, no vCPUs have been added\n"); |
| |
| break; |
| } |
| |
| case NE_ERR_FULL_CORES_NOT_USED: { |
| printf("Error in start enclave, enclave has no full cores set\n"); |
| |
| break; |
| } |
| |
| case NE_ERR_ENCLAVE_MEM_MIN_SIZE: { |
| printf("Error in start enclave, enclave memory is less than min size\n"); |
| |
| break; |
| } |
| |
| case NE_ERR_INVALID_FLAG_VALUE: { |
| printf("Error in start enclave, provided invalid flag\n"); |
| |
| break; |
| } |
| |
| case NE_ERR_INVALID_ENCLAVE_CID: { |
| printf("Error in start enclave, provided invalid enclave CID\n"); |
| |
| break; |
| } |
| |
| default: |
| printf("Error in start enclave [%m]\n"); |
| } |
| |
| return rc; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * ne_start_enclave_check_booted() - Start the enclave and wait for a hearbeat |
| * from it, on a newly created vsock channel, |
| * to check it has booted. |
| * @enclave_fd : The file descriptor associated with the enclave. |
| * |
| * Context: Process context. |
| * Return: |
| * * 0 on success. |
| * * Negative return value on failure. |
| */ |
| static int ne_start_enclave_check_booted(int enclave_fd) |
| { |
| struct sockaddr_vm client_vsock_addr = {}; |
| int client_vsock_fd = -1; |
| socklen_t client_vsock_len = sizeof(client_vsock_addr); |
| struct ne_enclave_start_info enclave_start_info = {}; |
| struct pollfd fds[1] = {}; |
| int rc = -EINVAL; |
| unsigned char recv_buf = 0; |
| struct sockaddr_vm server_vsock_addr = { |
| .svm_family = AF_VSOCK, |
| .svm_cid = NE_IMAGE_LOAD_HEARTBEAT_CID, |
| .svm_port = NE_IMAGE_LOAD_HEARTBEAT_PORT, |
| }; |
| int server_vsock_fd = -1; |
| |
| server_vsock_fd = socket(AF_VSOCK, SOCK_STREAM, 0); |
| if (server_vsock_fd < 0) { |
| rc = server_vsock_fd; |
| |
| printf("Error in socket [%m]\n"); |
| |
| return rc; |
| } |
| |
| rc = bind(server_vsock_fd, (struct sockaddr *)&server_vsock_addr, |
| sizeof(server_vsock_addr)); |
| if (rc < 0) { |
| printf("Error in bind [%m]\n"); |
| |
| goto out; |
| } |
| |
| rc = listen(server_vsock_fd, 1); |
| if (rc < 0) { |
| printf("Error in listen [%m]\n"); |
| |
| goto out; |
| } |
| |
| rc = ne_start_enclave(enclave_fd, &enclave_start_info); |
| if (rc < 0) |
| goto out; |
| |
| printf("Enclave started, CID %llu\n", enclave_start_info.enclave_cid); |
| |
| fds[0].fd = server_vsock_fd; |
| fds[0].events = POLLIN; |
| |
| rc = poll(fds, 1, NE_POLL_WAIT_TIME_MS); |
| if (rc < 0) { |
| printf("Error in poll [%m]\n"); |
| |
| goto out; |
| } |
| |
| if (!rc) { |
| printf("Poll timeout, %d seconds elapsed\n", NE_POLL_WAIT_TIME); |
| |
| rc = -ETIMEDOUT; |
| |
| goto out; |
| } |
| |
| if ((fds[0].revents & POLLIN) == 0) { |
| printf("Poll received value %d\n", fds[0].revents); |
| |
| rc = -EINVAL; |
| |
| goto out; |
| } |
| |
| rc = accept(server_vsock_fd, (struct sockaddr *)&client_vsock_addr, |
| &client_vsock_len); |
| if (rc < 0) { |
| printf("Error in accept [%m]\n"); |
| |
| goto out; |
| } |
| |
| client_vsock_fd = rc; |
| |
| /* |
| * Read the heartbeat value that the init process in the enclave sends |
| * after vsock connect. |
| */ |
| rc = read(client_vsock_fd, &recv_buf, sizeof(recv_buf)); |
| if (rc < 0) { |
| printf("Error in read [%m]\n"); |
| |
| goto out; |
| } |
| |
| if (rc != sizeof(recv_buf) || recv_buf != NE_IMAGE_LOAD_HEARTBEAT_VALUE) { |
| printf("Read %d instead of %d\n", recv_buf, |
| NE_IMAGE_LOAD_HEARTBEAT_VALUE); |
| |
| goto out; |
| } |
| |
| /* Write the heartbeat value back. */ |
| rc = write(client_vsock_fd, &recv_buf, sizeof(recv_buf)); |
| if (rc < 0) { |
| printf("Error in write [%m]\n"); |
| |
| goto out; |
| } |
| |
| rc = 0; |
| |
| out: |
| close(server_vsock_fd); |
| |
| return rc; |
| } |
| |
| int main(int argc, char *argv[]) |
| { |
| int enclave_fd = -1; |
| unsigned int i = 0; |
| int ne_dev_fd = -1; |
| struct ne_user_mem_region ne_user_mem_regions[NE_DEFAULT_NR_MEM_REGIONS] = {}; |
| unsigned int ne_vcpus[NE_DEFAULT_NR_VCPUS] = {}; |
| int rc = -EINVAL; |
| pthread_t thread_id = 0; |
| unsigned long slot_uid = 0; |
| |
| if (argc != 2) { |
| printf("Usage: %s <path_to_enclave_image>\n", argv[0]); |
| |
| exit(EXIT_FAILURE); |
| } |
| |
| if (strlen(argv[1]) >= PATH_MAX) { |
| printf("The size of the path to enclave image is higher than max path\n"); |
| |
| exit(EXIT_FAILURE); |
| } |
| |
| ne_dev_fd = open(NE_DEV_NAME, O_RDWR | O_CLOEXEC); |
| if (ne_dev_fd < 0) { |
| printf("Error in open NE device [%m]\n"); |
| |
| exit(EXIT_FAILURE); |
| } |
| |
| printf("Creating enclave slot ...\n"); |
| |
| rc = ne_create_vm(ne_dev_fd, &slot_uid, &enclave_fd); |
| |
| close(ne_dev_fd); |
| |
| if (rc < 0) |
| exit(EXIT_FAILURE); |
| |
| printf("Enclave fd %d\n", enclave_fd); |
| |
| rc = pthread_create(&thread_id, NULL, ne_poll_enclave_fd, (void *)&enclave_fd); |
| if (rc < 0) { |
| printf("Error in thread create [%m]\n"); |
| |
| close(enclave_fd); |
| |
| exit(EXIT_FAILURE); |
| } |
| |
| for (i = 0; i < NE_DEFAULT_NR_MEM_REGIONS; i++) { |
| ne_user_mem_regions[i].memory_size = NE_MIN_MEM_REGION_SIZE; |
| |
| rc = ne_alloc_user_mem_region(&ne_user_mem_regions[i]); |
| if (rc < 0) { |
| printf("Error in alloc userspace memory region, iter %d\n", i); |
| |
| goto release_enclave_fd; |
| } |
| } |
| |
| rc = ne_load_enclave_image(enclave_fd, ne_user_mem_regions, argv[1]); |
| if (rc < 0) |
| goto release_enclave_fd; |
| |
| for (i = 0; i < NE_DEFAULT_NR_MEM_REGIONS; i++) { |
| rc = ne_set_user_mem_region(enclave_fd, ne_user_mem_regions[i]); |
| if (rc < 0) { |
| printf("Error in set memory region, iter %d\n", i); |
| |
| goto release_enclave_fd; |
| } |
| } |
| |
| printf("Enclave memory regions were added\n"); |
| |
| for (i = 0; i < NE_DEFAULT_NR_VCPUS; i++) { |
| /* |
| * The vCPU is chosen from the enclave vCPU pool, if the value |
| * of the vcpu_id is 0. |
| */ |
| ne_vcpus[i] = 0; |
| rc = ne_add_vcpu(enclave_fd, &ne_vcpus[i]); |
| if (rc < 0) { |
| printf("Error in add vcpu, iter %d\n", i); |
| |
| goto release_enclave_fd; |
| } |
| |
| printf("Added vCPU %d to the enclave\n", ne_vcpus[i]); |
| } |
| |
| printf("Enclave vCPUs were added\n"); |
| |
| rc = ne_start_enclave_check_booted(enclave_fd); |
| if (rc < 0) { |
| printf("Error in the enclave start / image loading heartbeat logic [rc=%d]\n", rc); |
| |
| goto release_enclave_fd; |
| } |
| |
| printf("Entering sleep for %d seconds ...\n", NE_SLEEP_TIME); |
| |
| sleep(NE_SLEEP_TIME); |
| |
| close(enclave_fd); |
| |
| ne_free_mem_regions(ne_user_mem_regions); |
| |
| exit(EXIT_SUCCESS); |
| |
| release_enclave_fd: |
| close(enclave_fd); |
| ne_free_mem_regions(ne_user_mem_regions); |
| |
| exit(EXIT_FAILURE); |
| } |