| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Additional mixer mapping |
| * |
| * Copyright (c) 2002 by Takashi Iwai <tiwai@suse.de> |
| */ |
| |
| struct usbmix_dB_map { |
| u32 min; |
| u32 max; |
| }; |
| |
| struct usbmix_name_map { |
| int id; |
| const char *name; |
| int control; |
| const struct usbmix_dB_map *dB; |
| }; |
| |
| struct usbmix_selector_map { |
| int id; |
| int count; |
| const char **names; |
| }; |
| |
| struct usbmix_ctl_map { |
| u32 id; |
| const struct usbmix_name_map *map; |
| const struct usbmix_selector_map *selector_map; |
| const struct usbmix_connector_map *connector_map; |
| int ignore_ctl_error; |
| }; |
| |
| /* |
| * USB control mappers for SB Exitigy |
| */ |
| |
| /* |
| * Topology of SB Extigy (see on the wide screen :) |
| |
| USB_IN[1] --->FU[2]------------------------------+->MU[16]-->PU[17]-+->FU[18]--+->EU[27]--+->EU[21]-->FU[22]--+->FU[23] > Dig_OUT[24] |
| ^ | | | | |
| USB_IN[3] -+->SU[5]-->FU[6]--+->MU[14] ->PU[15]->+ | | | +->FU[25] > Dig_OUT[26] |
| ^ ^ | | | | |
| Dig_IN[4] -+ | | | | +->FU[28]---------------------> Spk_OUT[19] |
| | | | | |
| Lin-IN[7] -+-->FU[8]---------+ | | +----------------------------------------> Hph_OUT[20] |
| | | | |
| Mic-IN[9] --+->FU[10]----------------------------+ | |
| || | |
| || +----------------------------------------------------+ |
| VV V |
| ++--+->SU[11]-->FU[12] --------------------------------------------------------------------------------------> USB_OUT[13] |
| */ |
| |
| static const struct usbmix_name_map extigy_map[] = { |
| /* 1: IT pcm */ |
| { 2, "PCM Playback" }, /* FU */ |
| /* 3: IT pcm */ |
| /* 4: IT digital in */ |
| { 5, NULL }, /* DISABLED: this seems to be bogus on some firmware */ |
| { 6, "Digital In" }, /* FU */ |
| /* 7: IT line */ |
| { 8, "Line Playback" }, /* FU */ |
| /* 9: IT mic */ |
| { 10, "Mic Playback" }, /* FU */ |
| { 11, "Capture Source" }, /* SU */ |
| { 12, "Capture" }, /* FU */ |
| /* 13: OT pcm capture */ |
| /* 14: MU (w/o controls) */ |
| /* 15: PU (3D enh) */ |
| /* 16: MU (w/o controls) */ |
| { 17, NULL, 1 }, /* DISABLED: PU-switch (any effect?) */ |
| { 17, "Channel Routing", 2 }, /* PU: mode select */ |
| { 18, "Tone Control - Bass", UAC_FU_BASS }, /* FU */ |
| { 18, "Tone Control - Treble", UAC_FU_TREBLE }, /* FU */ |
| { 18, "Master Playback" }, /* FU; others */ |
| /* 19: OT speaker */ |
| /* 20: OT headphone */ |
| { 21, NULL }, /* DISABLED: EU (for what?) */ |
| { 22, "Digital Out Playback" }, /* FU */ |
| { 23, "Digital Out1 Playback" }, /* FU */ /* FIXME: corresponds to 24 */ |
| /* 24: OT digital out */ |
| { 25, "IEC958 Optical Playback" }, /* FU */ |
| { 26, "IEC958 Optical Playback" }, /* OT */ |
| { 27, NULL }, /* DISABLED: EU (for what?) */ |
| /* 28: FU speaker (mute) */ |
| { 29, NULL }, /* Digital Input Playback Source? */ |
| { 0 } /* terminator */ |
| }; |
| |
| /* Sound Blaster MP3+ controls mapping |
| * The default mixer channels have totally misleading names, |
| * e.g. no Master and fake PCM volume |
| * Pavel Mihaylov <bin@bash.info> |
| */ |
| static const struct usbmix_dB_map mp3plus_dB_1 = {.min = -4781, .max = 0}; |
| /* just guess */ |
| static const struct usbmix_dB_map mp3plus_dB_2 = {.min = -1781, .max = 618}; |
| /* just guess */ |
| |
| static const struct usbmix_name_map mp3plus_map[] = { |
| /* 1: IT pcm */ |
| /* 2: IT mic */ |
| /* 3: IT line */ |
| /* 4: IT digital in */ |
| /* 5: OT digital out */ |
| /* 6: OT speaker */ |
| /* 7: OT pcm capture */ |
| { 8, "Capture Source" }, /* FU, default PCM Capture Source */ |
| /* (Mic, Input 1 = Line input, Input 2 = Optical input) */ |
| { 9, "Master Playback" }, /* FU, default Speaker 1 */ |
| /* { 10, "Mic Capture", 1 }, */ /* FU, Mic Capture */ |
| { 10, /* "Mic Capture", */ NULL, 2, .dB = &mp3plus_dB_2 }, |
| /* FU, Mic Capture */ |
| { 10, "Mic Boost", 7 }, /* FU, default Auto Gain Input */ |
| { 11, "Line Capture", .dB = &mp3plus_dB_2 }, |
| /* FU, default PCM Capture */ |
| { 12, "Digital In Playback" }, /* FU, default PCM 1 */ |
| { 13, /* "Mic Playback", */ .dB = &mp3plus_dB_1 }, |
| /* FU, default Mic Playback */ |
| { 14, "Line Playback", .dB = &mp3plus_dB_1 }, /* FU, default Speaker */ |
| /* 15: MU */ |
| { 0 } /* terminator */ |
| }; |
| |
| /* Topology of SB Audigy 2 NX |
| |
| +----------------------------->EU[27]--+ |
| | v |
| | +----------------------------------->SU[29]---->FU[22]-->Dig_OUT[24] |
| | | ^ |
| USB_IN[1]-+------------+ +->EU[17]->+->FU[11]-+ |
| | v | v | |
| Dig_IN[4]---+->FU[6]-->MU[16]->FU[18]-+->EU[21]->SU[31]----->FU[30]->Hph_OUT[20] |
| | ^ | | |
| Lin_IN[7]-+--->FU[8]---+ +->EU[23]->FU[28]------------->Spk_OUT[19] |
| | | v |
| +--->FU[12]------------------------------------->SU[14]--->USB_OUT[15] |
| | ^ |
| +->FU[13]--------------------------------------+ |
| */ |
| static const struct usbmix_name_map audigy2nx_map[] = { |
| /* 1: IT pcm playback */ |
| /* 4: IT digital in */ |
| { 6, "Digital In Playback" }, /* FU */ |
| /* 7: IT line in */ |
| { 8, "Line Playback" }, /* FU */ |
| { 11, "What-U-Hear Capture" }, /* FU */ |
| { 12, "Line Capture" }, /* FU */ |
| { 13, "Digital In Capture" }, /* FU */ |
| { 14, "Capture Source" }, /* SU */ |
| /* 15: OT pcm capture */ |
| /* 16: MU w/o controls */ |
| { 17, NULL }, /* DISABLED: EU (for what?) */ |
| { 18, "Master Playback" }, /* FU */ |
| /* 19: OT speaker */ |
| /* 20: OT headphone */ |
| { 21, NULL }, /* DISABLED: EU (for what?) */ |
| { 22, "Digital Out Playback" }, /* FU */ |
| { 23, NULL }, /* DISABLED: EU (for what?) */ |
| /* 24: OT digital out */ |
| { 27, NULL }, /* DISABLED: EU (for what?) */ |
| { 28, "Speaker Playback" }, /* FU */ |
| { 29, "Digital Out Source" }, /* SU */ |
| { 30, "Headphone Playback" }, /* FU */ |
| { 31, "Headphone Source" }, /* SU */ |
| { 0 } /* terminator */ |
| }; |
| |
| static const struct usbmix_name_map mbox1_map[] = { |
| { 1, "Clock" }, |
| { 0 } /* terminator */ |
| }; |
| |
| static const struct usbmix_selector_map c400_selectors[] = { |
| { |
| .id = 0x80, |
| .count = 2, |
| .names = (const char*[]) {"Internal", "SPDIF"} |
| }, |
| { 0 } /* terminator */ |
| }; |
| |
| static const struct usbmix_selector_map audigy2nx_selectors[] = { |
| { |
| .id = 14, /* Capture Source */ |
| .count = 3, |
| .names = (const char*[]) {"Line", "Digital In", "What-U-Hear"} |
| }, |
| { |
| .id = 29, /* Digital Out Source */ |
| .count = 3, |
| .names = (const char*[]) {"Front", "PCM", "Digital In"} |
| }, |
| { |
| .id = 31, /* Headphone Source */ |
| .count = 2, |
| .names = (const char*[]) {"Front", "Side"} |
| }, |
| { 0 } /* terminator */ |
| }; |
| |
| /* Creative SoundBlaster Live! 24-bit External */ |
| static const struct usbmix_name_map live24ext_map[] = { |
| /* 2: PCM Playback Volume */ |
| { 5, "Mic Capture" }, /* FU, default PCM Capture Volume */ |
| { 0 } /* terminator */ |
| }; |
| |
| /* LineX FM Transmitter entry - needed to bypass controls bug */ |
| static const struct usbmix_name_map linex_map[] = { |
| /* 1: IT pcm */ |
| /* 2: OT Speaker */ |
| { 3, "Master" }, /* FU: master volume - left / right / mute */ |
| { 0 } /* terminator */ |
| }; |
| |
| static const struct usbmix_name_map maya44_map[] = { |
| /* 1: IT line */ |
| { 2, "Line Playback" }, /* FU */ |
| /* 3: IT line */ |
| { 4, "Line Playback" }, /* FU */ |
| /* 5: IT pcm playback */ |
| /* 6: MU */ |
| { 7, "Master Playback" }, /* FU */ |
| /* 8: OT speaker */ |
| /* 9: IT line */ |
| { 10, "Line Capture" }, /* FU */ |
| /* 11: MU */ |
| /* 12: OT pcm capture */ |
| { } |
| }; |
| |
| /* Section "justlink_map" below added by James Courtier-Dutton <James@superbug.demon.co.uk> |
| * sourced from Maplin Electronics (https://www.maplin.co.uk), part number A56AK |
| * Part has 2 connectors that act as a single output. (TOSLINK Optical for digital out, and 3.5mm Jack for Analogue out.) |
| * The USB Mixer publishes a Microphone and extra Volume controls for it, but none exist on the device, |
| * so this map removes all unwanted sliders from alsamixer |
| */ |
| |
| static const struct usbmix_name_map justlink_map[] = { |
| /* 1: IT pcm playback */ |
| /* 2: Not present */ |
| { 3, NULL}, /* IT mic (No mic input on device) */ |
| /* 4: Not present */ |
| /* 5: OT speacker */ |
| /* 6: OT pcm capture */ |
| { 7, "Master Playback" }, /* Mute/volume for speaker */ |
| { 8, NULL }, /* Capture Switch (No capture inputs on device) */ |
| { 9, NULL }, /* Capture Mute/volume (No capture inputs on device */ |
| /* 0xa: Not present */ |
| /* 0xb: MU (w/o controls) */ |
| { 0xc, NULL }, /* Mic feedback Mute/volume (No capture inputs on device) */ |
| { 0 } /* terminator */ |
| }; |
| |
| /* TerraTec Aureon 5.1 MkII USB */ |
| static const struct usbmix_name_map aureon_51_2_map[] = { |
| /* 1: IT USB */ |
| /* 2: IT Mic */ |
| /* 3: IT Line */ |
| /* 4: IT SPDIF */ |
| /* 5: OT SPDIF */ |
| /* 6: OT Speaker */ |
| /* 7: OT USB */ |
| { 8, "Capture Source" }, /* SU */ |
| { 9, "Master Playback" }, /* FU */ |
| { 10, "Mic Capture" }, /* FU */ |
| { 11, "Line Capture" }, /* FU */ |
| { 12, "IEC958 In Capture" }, /* FU */ |
| { 13, "Mic Playback" }, /* FU */ |
| { 14, "Line Playback" }, /* FU */ |
| /* 15: MU */ |
| {} /* terminator */ |
| }; |
| |
| static const struct usbmix_name_map scratch_live_map[] = { |
| /* 1: IT Line 1 (USB streaming) */ |
| /* 2: OT Line 1 (Speaker) */ |
| /* 3: IT Line 1 (Line connector) */ |
| { 4, "Line 1 In" }, /* FU */ |
| /* 5: OT Line 1 (USB streaming) */ |
| /* 6: IT Line 2 (USB streaming) */ |
| /* 7: OT Line 2 (Speaker) */ |
| /* 8: IT Line 2 (Line connector) */ |
| { 9, "Line 2 In" }, /* FU */ |
| /* 10: OT Line 2 (USB streaming) */ |
| /* 11: IT Mic (Line connector) */ |
| /* 12: OT Mic (USB streaming) */ |
| { 0 } /* terminator */ |
| }; |
| |
| static const struct usbmix_name_map ebox44_map[] = { |
| { 4, NULL }, /* FU */ |
| { 6, NULL }, /* MU */ |
| { 7, NULL }, /* FU */ |
| { 10, NULL }, /* FU */ |
| { 11, NULL }, /* MU */ |
| { 0 } |
| }; |
| |
| /* "Gamesurround Muse Pocket LT" looks same like "Sound Blaster MP3+" |
| * most importand difference is SU[8], it should be set to "Capture Source" |
| * to make alsamixer and PA working properly. |
| * FIXME: or mp3plus_map should use "Capture Source" too, |
| * so this maps can be merget |
| */ |
| static const struct usbmix_name_map hercules_usb51_map[] = { |
| { 8, "Capture Source" }, /* SU, default "PCM Capture Source" */ |
| { 9, "Master Playback" }, /* FU, default "Speaker Playback" */ |
| { 10, "Mic Boost", 7 }, /* FU, default "Auto Gain Input" */ |
| { 11, "Line Capture" }, /* FU, default "PCM Capture" */ |
| { 13, "Mic Bypass Playback" }, /* FU, default "Mic Playback" */ |
| { 14, "Line Bypass Playback" }, /* FU, default "Line Playback" */ |
| { 0 } /* terminator */ |
| }; |
| |
| /* Plantronics Gamecom 780 has a broken volume control, better to disable it */ |
| static const struct usbmix_name_map gamecom780_map[] = { |
| { 9, NULL }, /* FU, speaker out */ |
| {} |
| }; |
| |
| /* some (all?) SCMS USB3318 devices are affected by a firmware lock up |
| * when anything attempts to access FU 10 (control) |
| */ |
| static const struct usbmix_name_map scms_usb3318_map[] = { |
| { 10, NULL }, |
| { 0 } |
| }; |
| |
| /* Bose companion 5, the dB conversion factor is 16 instead of 256 */ |
| static const struct usbmix_dB_map bose_companion5_dB = {-5006, -6}; |
| static const struct usbmix_name_map bose_companion5_map[] = { |
| { 3, NULL, .dB = &bose_companion5_dB }, |
| { 0 } /* terminator */ |
| }; |
| |
| /* |
| * Dell usb dock with ALC4020 codec had a firmware problem where it got |
| * screwed up when zero volume is passed; just skip it as a workaround |
| * |
| * Also the extension unit gives an access error, so skip it as well. |
| */ |
| static const struct usbmix_name_map dell_alc4020_map[] = { |
| { 4, NULL }, /* extension unit */ |
| { 16, NULL }, |
| { 19, NULL }, |
| { 0 } |
| }; |
| |
| /* |
| * Corsair Virtuoso calls everything "Headset" without this, leading to |
| * applications moving the sidetone control instead of the main one. |
| */ |
| static const struct usbmix_name_map corsair_virtuoso_map[] = { |
| { 3, "Mic Capture" }, |
| { 6, "Sidetone Playback" }, |
| { 0 } |
| }; |
| |
| /* Some mobos shipped with a dummy HD-audio show the invalid GET_MIN/GET_MAX |
| * response for Input Gain Pad (id=19, control=12) and the connector status |
| * for SPDIF terminal (id=18). Skip them. |
| */ |
| static const struct usbmix_name_map asus_rog_map[] = { |
| { 18, NULL }, /* OT, connector control */ |
| { 19, NULL, 12 }, /* FU, Input Gain Pad */ |
| {} |
| }; |
| |
| static const struct usbmix_name_map lenovo_p620_rear_map[] = { |
| { 19, NULL, 12 }, /* FU, Input Gain Pad */ |
| {} |
| }; |
| |
| /* TRX40 mobos with Realtek ALC1220-VB */ |
| static const struct usbmix_name_map trx40_mobo_map[] = { |
| { 18, NULL }, /* OT, IEC958 - broken response, disabled */ |
| { 19, NULL, 12 }, /* FU, Input Gain Pad - broken response, disabled */ |
| { 16, "Speaker" }, /* OT */ |
| { 22, "Speaker Playback" }, /* FU */ |
| { 7, "Line" }, /* IT */ |
| { 19, "Line Capture" }, /* FU */ |
| { 17, "Front Headphone" }, /* OT */ |
| { 23, "Front Headphone Playback" }, /* FU */ |
| { 8, "Mic" }, /* IT */ |
| { 20, "Mic Capture" }, /* FU */ |
| { 9, "Front Mic" }, /* IT */ |
| { 21, "Front Mic Capture" }, /* FU */ |
| { 24, "IEC958 Playback" }, /* FU */ |
| {} |
| }; |
| |
| static const struct usbmix_connector_map trx40_mobo_connector_map[] = { |
| { 10, 16 }, /* (Back) Speaker */ |
| { 11, 17 }, /* Front Headphone */ |
| { 13, 7 }, /* Line */ |
| { 14, 8 }, /* Mic */ |
| { 15, 9 }, /* Front Mic */ |
| {} |
| }; |
| |
| /* Rear panel + front mic on Gigabyte TRX40 Aorus Master with ALC1220-VB */ |
| static const struct usbmix_name_map aorus_master_alc1220vb_map[] = { |
| { 17, NULL }, /* OT, IEC958?, disabled */ |
| { 19, NULL, 12 }, /* FU, Input Gain Pad - broken response, disabled */ |
| { 16, "Line Out" }, /* OT */ |
| { 22, "Line Out Playback" }, /* FU */ |
| { 7, "Line" }, /* IT */ |
| { 19, "Line Capture" }, /* FU */ |
| { 8, "Mic" }, /* IT */ |
| { 20, "Mic Capture" }, /* FU */ |
| { 9, "Front Mic" }, /* IT */ |
| { 21, "Front Mic Capture" }, /* FU */ |
| {} |
| }; |
| |
| /* |
| * Control map entries |
| */ |
| |
| static const struct usbmix_ctl_map usbmix_ctl_maps[] = { |
| { |
| .id = USB_ID(0x041e, 0x3000), |
| .map = extigy_map, |
| .ignore_ctl_error = 1, |
| }, |
| { |
| .id = USB_ID(0x041e, 0x3010), |
| .map = mp3plus_map, |
| }, |
| { |
| .id = USB_ID(0x041e, 0x3020), |
| .map = audigy2nx_map, |
| .selector_map = audigy2nx_selectors, |
| }, |
| { |
| .id = USB_ID(0x041e, 0x3040), |
| .map = live24ext_map, |
| }, |
| { |
| .id = USB_ID(0x041e, 0x3048), |
| .map = audigy2nx_map, |
| .selector_map = audigy2nx_selectors, |
| }, |
| { /* Logitech, Inc. QuickCam Pro for Notebooks */ |
| .id = USB_ID(0x046d, 0x0991), |
| .ignore_ctl_error = 1, |
| }, |
| { /* Logitech, Inc. QuickCam E 3500 */ |
| .id = USB_ID(0x046d, 0x09a4), |
| .ignore_ctl_error = 1, |
| }, |
| { /* Plantronics GameCom 780 */ |
| .id = USB_ID(0x047f, 0xc010), |
| .map = gamecom780_map, |
| }, |
| { |
| /* Hercules DJ Console (Windows Edition) */ |
| .id = USB_ID(0x06f8, 0xb000), |
| .ignore_ctl_error = 1, |
| }, |
| { |
| /* Hercules DJ Console (Macintosh Edition) */ |
| .id = USB_ID(0x06f8, 0xd002), |
| .ignore_ctl_error = 1, |
| }, |
| { |
| /* Hercules Gamesurround Muse Pocket LT |
| * (USB 5.1 Channel Audio Adapter) |
| */ |
| .id = USB_ID(0x06f8, 0xc000), |
| .map = hercules_usb51_map, |
| }, |
| { |
| .id = USB_ID(0x0763, 0x2030), |
| .selector_map = c400_selectors, |
| }, |
| { |
| .id = USB_ID(0x0763, 0x2031), |
| .selector_map = c400_selectors, |
| }, |
| { |
| .id = USB_ID(0x08bb, 0x2702), |
| .map = linex_map, |
| .ignore_ctl_error = 1, |
| }, |
| { |
| .id = USB_ID(0x0a92, 0x0091), |
| .map = maya44_map, |
| }, |
| { |
| .id = USB_ID(0x0c45, 0x1158), |
| .map = justlink_map, |
| }, |
| { |
| .id = USB_ID(0x0ccd, 0x0028), |
| .map = aureon_51_2_map, |
| }, |
| { |
| .id = USB_ID(0x0bda, 0x4014), |
| .map = dell_alc4020_map, |
| }, |
| { |
| .id = USB_ID(0x0dba, 0x1000), |
| .map = mbox1_map, |
| }, |
| { |
| .id = USB_ID(0x13e5, 0x0001), |
| .map = scratch_live_map, |
| .ignore_ctl_error = 1, |
| }, |
| { |
| .id = USB_ID(0x200c, 0x1018), |
| .map = ebox44_map, |
| }, |
| { |
| /* MAYA44 USB+ */ |
| .id = USB_ID(0x2573, 0x0008), |
| .map = maya44_map, |
| }, |
| { |
| /* KEF X300A */ |
| .id = USB_ID(0x27ac, 0x1000), |
| .map = scms_usb3318_map, |
| }, |
| { |
| /* Arcam rPAC */ |
| .id = USB_ID(0x25c4, 0x0003), |
| .map = scms_usb3318_map, |
| }, |
| { |
| /* Bose Companion 5 */ |
| .id = USB_ID(0x05a7, 0x1020), |
| .map = bose_companion5_map, |
| }, |
| { |
| /* Corsair Virtuoso (wired mode) */ |
| .id = USB_ID(0x1b1c, 0x0a41), |
| .map = corsair_virtuoso_map, |
| }, |
| { |
| /* Corsair Virtuoso (wireless mode) */ |
| .id = USB_ID(0x1b1c, 0x0a42), |
| .map = corsair_virtuoso_map, |
| }, |
| { /* Gigabyte TRX40 Aorus Master (rear panel + front mic) */ |
| .id = USB_ID(0x0414, 0xa001), |
| .map = aorus_master_alc1220vb_map, |
| }, |
| { /* Gigabyte TRX40 Aorus Pro WiFi */ |
| .id = USB_ID(0x0414, 0xa002), |
| .map = trx40_mobo_map, |
| .connector_map = trx40_mobo_connector_map, |
| }, |
| { /* ASUS ROG Zenith II */ |
| .id = USB_ID(0x0b05, 0x1916), |
| .map = asus_rog_map, |
| }, |
| { /* ASUS ROG Strix */ |
| .id = USB_ID(0x0b05, 0x1917), |
| .map = asus_rog_map, |
| }, |
| { /* MSI TRX40 Creator */ |
| .id = USB_ID(0x0db0, 0x0d64), |
| .map = trx40_mobo_map, |
| .connector_map = trx40_mobo_connector_map, |
| }, |
| { /* MSI TRX40 */ |
| .id = USB_ID(0x0db0, 0x543d), |
| .map = trx40_mobo_map, |
| .connector_map = trx40_mobo_connector_map, |
| }, |
| { /* Asrock TRX40 Creator */ |
| .id = USB_ID(0x26ce, 0x0a01), |
| .map = trx40_mobo_map, |
| .connector_map = trx40_mobo_connector_map, |
| }, |
| { /* Lenovo ThinkStation P620 Rear */ |
| .id = USB_ID(0x17aa, 0x1046), |
| .map = lenovo_p620_rear_map, |
| }, |
| { 0 } /* terminator */ |
| }; |
| |
| /* |
| * Control map entries for UAC3 BADD profiles |
| */ |
| |
| static const struct usbmix_name_map uac3_badd_generic_io_map[] = { |
| { UAC3_BADD_FU_ID2, "Generic Out Playback" }, |
| { UAC3_BADD_FU_ID5, "Generic In Capture" }, |
| { 0 } /* terminator */ |
| }; |
| static const struct usbmix_name_map uac3_badd_headphone_map[] = { |
| { UAC3_BADD_FU_ID2, "Headphone Playback" }, |
| { 0 } /* terminator */ |
| }; |
| static const struct usbmix_name_map uac3_badd_speaker_map[] = { |
| { UAC3_BADD_FU_ID2, "Speaker Playback" }, |
| { 0 } /* terminator */ |
| }; |
| static const struct usbmix_name_map uac3_badd_microphone_map[] = { |
| { UAC3_BADD_FU_ID5, "Mic Capture" }, |
| { 0 } /* terminator */ |
| }; |
| /* Covers also 'headset adapter' profile */ |
| static const struct usbmix_name_map uac3_badd_headset_map[] = { |
| { UAC3_BADD_FU_ID2, "Headset Playback" }, |
| { UAC3_BADD_FU_ID5, "Headset Capture" }, |
| { UAC3_BADD_FU_ID7, "Sidetone Mixing" }, |
| { 0 } /* terminator */ |
| }; |
| static const struct usbmix_name_map uac3_badd_speakerphone_map[] = { |
| { UAC3_BADD_FU_ID2, "Speaker Playback" }, |
| { UAC3_BADD_FU_ID5, "Mic Capture" }, |
| { 0 } /* terminator */ |
| }; |
| |
| static const struct usbmix_ctl_map uac3_badd_usbmix_ctl_maps[] = { |
| { |
| .id = UAC3_FUNCTION_SUBCLASS_GENERIC_IO, |
| .map = uac3_badd_generic_io_map, |
| }, |
| { |
| .id = UAC3_FUNCTION_SUBCLASS_HEADPHONE, |
| .map = uac3_badd_headphone_map, |
| }, |
| { |
| .id = UAC3_FUNCTION_SUBCLASS_SPEAKER, |
| .map = uac3_badd_speaker_map, |
| }, |
| { |
| .id = UAC3_FUNCTION_SUBCLASS_MICROPHONE, |
| .map = uac3_badd_microphone_map, |
| }, |
| { |
| .id = UAC3_FUNCTION_SUBCLASS_HEADSET, |
| .map = uac3_badd_headset_map, |
| }, |
| { |
| .id = UAC3_FUNCTION_SUBCLASS_HEADSET_ADAPTER, |
| .map = uac3_badd_headset_map, |
| }, |
| { |
| .id = UAC3_FUNCTION_SUBCLASS_SPEAKERPHONE, |
| .map = uac3_badd_speakerphone_map, |
| }, |
| { 0 } /* terminator */ |
| }; |