| /* |
| * Pistachio platform setup |
| * |
| * Copyright (C) 2014 Google, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms and conditions of the GNU General Public License, |
| * version 2, as published by the Free Software Foundation. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/of_address.h> |
| #include <linux/of_fdt.h> |
| #include <linux/of_platform.h> |
| |
| #include <asm/cacheflush.h> |
| #include <asm/dma-coherence.h> |
| #include <asm/fw/fw.h> |
| #include <asm/mips-boards/generic.h> |
| #include <asm/mips-cm.h> |
| #include <asm/mips-cpc.h> |
| #include <asm/prom.h> |
| #include <asm/smp-ops.h> |
| #include <asm/traps.h> |
| |
| const char *get_system_type(void) |
| { |
| return "IMG Pistachio SoC"; |
| } |
| |
| static void __init plat_setup_iocoherency(void) |
| { |
| /* |
| * Kernel has been configured with software coherency |
| * but we might choose to turn it off and use hardware |
| * coherency instead. |
| */ |
| if (mips_cm_numiocu() != 0) { |
| /* Nothing special needs to be done to enable coherency */ |
| pr_info("CMP IOCU detected\n"); |
| hw_coherentio = 1; |
| if (coherentio == 0) |
| pr_info("Hardware DMA cache coherency disabled\n"); |
| else |
| pr_info("Hardware DMA cache coherency enabled\n"); |
| } else { |
| if (coherentio == 1) |
| pr_info("Hardware DMA cache coherency unsupported, but enabled from command line!\n"); |
| else |
| pr_info("Software DMA cache coherency enabled\n"); |
| } |
| } |
| |
| void __init plat_mem_setup(void) |
| { |
| if (fw_arg0 != -2) |
| panic("Device-tree not present"); |
| |
| __dt_setup_arch((void *)fw_arg1); |
| strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE); |
| |
| plat_setup_iocoherency(); |
| } |
| |
| #define DEFAULT_CPC_BASE_ADDR 0x1bde0000 |
| #define DEFAULT_CDMM_BASE_ADDR 0x1bdd0000 |
| |
| phys_addr_t mips_cpc_default_phys_base(void) |
| { |
| return DEFAULT_CPC_BASE_ADDR; |
| } |
| |
| phys_addr_t mips_cdmm_phys_base(void) |
| { |
| return DEFAULT_CDMM_BASE_ADDR; |
| } |
| |
| static void __init mips_nmi_setup(void) |
| { |
| void *base; |
| extern char except_vec_nmi; |
| |
| base = cpu_has_veic ? |
| (void *)(CAC_BASE + 0xa80) : |
| (void *)(CAC_BASE + 0x380); |
| memcpy(base, &except_vec_nmi, 0x80); |
| flush_icache_range((unsigned long)base, |
| (unsigned long)base + 0x80); |
| } |
| |
| static void __init mips_ejtag_setup(void) |
| { |
| void *base; |
| extern char except_vec_ejtag_debug; |
| |
| base = cpu_has_veic ? |
| (void *)(CAC_BASE + 0xa00) : |
| (void *)(CAC_BASE + 0x300); |
| memcpy(base, &except_vec_ejtag_debug, 0x80); |
| flush_icache_range((unsigned long)base, |
| (unsigned long)base + 0x80); |
| } |
| |
| void __init prom_init(void) |
| { |
| board_nmi_handler_setup = mips_nmi_setup; |
| board_ejtag_handler_setup = mips_ejtag_setup; |
| |
| mips_cm_probe(); |
| mips_cpc_probe(); |
| register_cps_smp_ops(); |
| } |
| |
| void __init prom_free_prom_memory(void) |
| { |
| } |
| |
| void __init device_tree_init(void) |
| { |
| if (!initial_boot_params) |
| return; |
| |
| unflatten_and_copy_device_tree(); |
| } |
| |
| static int __init plat_of_setup(void) |
| { |
| if (!of_have_populated_dt()) |
| panic("Device tree not present"); |
| |
| if (of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL)) |
| panic("Failed to populate DT"); |
| |
| return 0; |
| } |
| arch_initcall(plat_of_setup); |