| /* |
| * sisusb - usb kernel driver for SiS315(E) based USB2VGA dongles |
| * |
| * VGA text mode console part |
| * |
| * Copyright (C) 2005 by Thomas Winischhofer, Vienna, Austria |
| * |
| * If distributed as part of the Linux kernel, this code is licensed under the |
| * terms of the GPL v2. |
| * |
| * Otherwise, the following license terms apply: |
| * |
| * * Redistribution and use in source and binary forms, with or without |
| * * modification, are permitted provided that the following conditions |
| * * are met: |
| * * 1) Redistributions of source code must retain the above copyright |
| * * notice, this list of conditions and the following disclaimer. |
| * * 2) Redistributions in binary form must reproduce the above copyright |
| * * notice, this list of conditions and the following disclaimer in the |
| * * documentation and/or other materials provided with the distribution. |
| * * 3) The name of the author may not be used to endorse or promote products |
| * * derived from this software without specific psisusbr written permission. |
| * * |
| * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESSED OR |
| * * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES |
| * * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. |
| * * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, |
| * * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT |
| * * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF |
| * * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * Author: Thomas Winischhofer <thomas@winischhofer.net> |
| * |
| * Portions based on vgacon.c which are |
| * Created 28 Sep 1997 by Geert Uytterhoeven |
| * Rewritten by Martin Mares <mj@ucw.cz>, July 1998 |
| * based on code Copyright (C) 1991, 1992 Linus Torvalds |
| * 1995 Jay Estabrook |
| * |
| * A note on using in_atomic() in here: We can't handle console |
| * calls from non-schedulable context due to our USB-dependend |
| * nature. For now, this driver just ignores any calls if it |
| * detects this state. |
| * |
| */ |
| |
| #include <linux/mutex.h> |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/signal.h> |
| #include <linux/fs.h> |
| #include <linux/usb.h> |
| #include <linux/tty.h> |
| #include <linux/console.h> |
| #include <linux/string.h> |
| #include <linux/kd.h> |
| #include <linux/init.h> |
| #include <linux/vt_kern.h> |
| #include <linux/selection.h> |
| #include <linux/spinlock.h> |
| #include <linux/kref.h> |
| #include <linux/ioport.h> |
| #include <linux/interrupt.h> |
| #include <linux/vmalloc.h> |
| |
| #include "sisusb.h" |
| #include "sisusb_init.h" |
| |
| #ifdef INCL_SISUSB_CON |
| |
| #define sisusbcon_writew(val, addr) (*(addr) = (val)) |
| #define sisusbcon_readw(addr) (*(addr)) |
| #define sisusbcon_memmovew(d, s, c) memmove(d, s, c) |
| #define sisusbcon_memcpyw(d, s, c) memcpy(d, s, c) |
| |
| /* vc_data -> sisusb conversion table */ |
| static struct sisusb_usb_data *mysisusbs[MAX_NR_CONSOLES]; |
| |
| /* Forward declaration */ |
| static const struct consw sisusb_con; |
| |
| static inline void |
| sisusbcon_memsetw(u16 *s, u16 c, unsigned int count) |
| { |
| count /= 2; |
| while (count--) |
| sisusbcon_writew(c, s++); |
| } |
| |
| static inline void |
| sisusb_initialize(struct sisusb_usb_data *sisusb) |
| { |
| /* Reset cursor and start address */ |
| if (sisusb_setidxreg(sisusb, SISCR, 0x0c, 0x00)) |
| return; |
| if (sisusb_setidxreg(sisusb, SISCR, 0x0d, 0x00)) |
| return; |
| if (sisusb_setidxreg(sisusb, SISCR, 0x0e, 0x00)) |
| return; |
| sisusb_setidxreg(sisusb, SISCR, 0x0f, 0x00); |
| } |
| |
| static inline void |
| sisusbcon_set_start_address(struct sisusb_usb_data *sisusb, struct vc_data *c) |
| { |
| sisusb->cur_start_addr = (c->vc_visible_origin - sisusb->scrbuf) / 2; |
| |
| sisusb_setidxreg(sisusb, SISCR, 0x0c, (sisusb->cur_start_addr >> 8)); |
| sisusb_setidxreg(sisusb, SISCR, 0x0d, (sisusb->cur_start_addr & 0xff)); |
| } |
| |
| void |
| sisusb_set_cursor(struct sisusb_usb_data *sisusb, unsigned int location) |
| { |
| if (sisusb->sisusb_cursor_loc == location) |
| return; |
| |
| sisusb->sisusb_cursor_loc = location; |
| |
| /* Hardware bug: Text cursor appears twice or not at all |
| * at some positions. Work around it with the cursor skew |
| * bits. |
| */ |
| |
| if ((location & 0x0007) == 0x0007) { |
| sisusb->bad_cursor_pos = 1; |
| location--; |
| if (sisusb_setidxregandor(sisusb, SISCR, 0x0b, 0x1f, 0x20)) |
| return; |
| } else if (sisusb->bad_cursor_pos) { |
| if (sisusb_setidxregand(sisusb, SISCR, 0x0b, 0x1f)) |
| return; |
| sisusb->bad_cursor_pos = 0; |
| } |
| |
| if (sisusb_setidxreg(sisusb, SISCR, 0x0e, (location >> 8))) |
| return; |
| sisusb_setidxreg(sisusb, SISCR, 0x0f, (location & 0xff)); |
| } |
| |
| static inline struct sisusb_usb_data * |
| sisusb_get_sisusb(unsigned short console) |
| { |
| return mysisusbs[console]; |
| } |
| |
| static inline int |
| sisusb_sisusb_valid(struct sisusb_usb_data *sisusb) |
| { |
| if (!sisusb->present || !sisusb->ready || !sisusb->sisusb_dev) |
| return 0; |
| |
| return 1; |
| } |
| |
| static struct sisusb_usb_data * |
| sisusb_get_sisusb_lock_and_check(unsigned short console) |
| { |
| struct sisusb_usb_data *sisusb; |
| |
| /* We can't handle console calls in non-schedulable |
| * context due to our locks and the USB transport. |
| * So we simply ignore them. This should only affect |
| * some calls to printk. |
| */ |
| if (in_atomic()) |
| return NULL; |
| |
| sisusb = sisusb_get_sisusb(console); |
| if (!sisusb) |
| return NULL; |
| |
| mutex_lock(&sisusb->lock); |
| |
| if (!sisusb_sisusb_valid(sisusb) || |
| !sisusb->havethisconsole[console]) { |
| mutex_unlock(&sisusb->lock); |
| return NULL; |
| } |
| |
| return sisusb; |
| } |
| |
| static int |
| sisusb_is_inactive(struct vc_data *c, struct sisusb_usb_data *sisusb) |
| { |
| if (sisusb->is_gfx || |
| sisusb->textmodedestroyed || |
| c->vc_mode != KD_TEXT) |
| return 1; |
| |
| return 0; |
| } |
| |
| /* con_startup console interface routine */ |
| static const char * |
| sisusbcon_startup(void) |
| { |
| return "SISUSBCON"; |
| } |
| |
| /* con_init console interface routine */ |
| static void |
| sisusbcon_init(struct vc_data *c, int init) |
| { |
| struct sisusb_usb_data *sisusb; |
| int cols, rows; |
| |
| /* This is called by do_take_over_console(), |
| * ie by us/under our control. It is |
| * only called after text mode and fonts |
| * are set up/restored. |
| */ |
| |
| sisusb = sisusb_get_sisusb(c->vc_num); |
| if (!sisusb) |
| return; |
| |
| mutex_lock(&sisusb->lock); |
| |
| if (!sisusb_sisusb_valid(sisusb)) { |
| mutex_unlock(&sisusb->lock); |
| return; |
| } |
| |
| c->vc_can_do_color = 1; |
| |
| c->vc_complement_mask = 0x7700; |
| |
| c->vc_hi_font_mask = sisusb->current_font_512 ? 0x0800 : 0; |
| |
| sisusb->haveconsole = 1; |
| |
| sisusb->havethisconsole[c->vc_num] = 1; |
| |
| /* We only support 640x400 */ |
| c->vc_scan_lines = 400; |
| |
| c->vc_font.height = sisusb->current_font_height; |
| |
| /* We only support width = 8 */ |
| cols = 80; |
| rows = c->vc_scan_lines / c->vc_font.height; |
| |
| /* Increment usage count for our sisusb. |
| * Doing so saves us from upping/downing |
| * the disconnect semaphore; we can't |
| * lose our sisusb until this is undone |
| * in con_deinit. For all other console |
| * interface functions, it suffices to |
| * use sisusb->lock and do a quick check |
| * of sisusb for device disconnection. |
| */ |
| kref_get(&sisusb->kref); |
| |
| if (!*c->vc_uni_pagedir_loc) |
| con_set_default_unimap(c); |
| |
| mutex_unlock(&sisusb->lock); |
| |
| if (init) { |
| c->vc_cols = cols; |
| c->vc_rows = rows; |
| } else |
| vc_resize(c, cols, rows); |
| } |
| |
| /* con_deinit console interface routine */ |
| static void |
| sisusbcon_deinit(struct vc_data *c) |
| { |
| struct sisusb_usb_data *sisusb; |
| int i; |
| |
| /* This is called by do_take_over_console() |
| * and others, ie not under our control. |
| */ |
| |
| sisusb = sisusb_get_sisusb(c->vc_num); |
| if (!sisusb) |
| return; |
| |
| mutex_lock(&sisusb->lock); |
| |
| /* Clear ourselves in mysisusbs */ |
| mysisusbs[c->vc_num] = NULL; |
| |
| sisusb->havethisconsole[c->vc_num] = 0; |
| |
| /* Free our font buffer if all consoles are gone */ |
| if (sisusb->font_backup) { |
| for(i = 0; i < MAX_NR_CONSOLES; i++) { |
| if (sisusb->havethisconsole[c->vc_num]) |
| break; |
| } |
| if (i == MAX_NR_CONSOLES) { |
| vfree(sisusb->font_backup); |
| sisusb->font_backup = NULL; |
| } |
| } |
| |
| mutex_unlock(&sisusb->lock); |
| |
| /* decrement the usage count on our sisusb */ |
| kref_put(&sisusb->kref, sisusb_delete); |
| } |
| |
| /* interface routine */ |
| static u8 |
| sisusbcon_build_attr(struct vc_data *c, u8 color, u8 intensity, |
| u8 blink, u8 underline, u8 reverse, u8 unused) |
| { |
| u8 attr = color; |
| |
| if (underline) |
| attr = (attr & 0xf0) | c->vc_ulcolor; |
| else if (intensity == 0) |
| attr = (attr & 0xf0) | c->vc_halfcolor; |
| |
| if (reverse) |
| attr = ((attr) & 0x88) | |
| ((((attr) >> 4) | |
| ((attr) << 4)) & 0x77); |
| |
| if (blink) |
| attr ^= 0x80; |
| |
| if (intensity == 2) |
| attr ^= 0x08; |
| |
| return attr; |
| } |
| |
| /* Interface routine */ |
| static void |
| sisusbcon_invert_region(struct vc_data *vc, u16 *p, int count) |
| { |
| /* Invert a region. This is called with a pointer |
| * to the console's internal screen buffer. So we |
| * simply do the inversion there and rely on |
| * a call to putc(s) to update the real screen. |
| */ |
| |
| while (count--) { |
| u16 a = sisusbcon_readw(p); |
| |
| a = ((a) & 0x88ff) | |
| (((a) & 0x7000) >> 4) | |
| (((a) & 0x0700) << 4); |
| |
| sisusbcon_writew(a, p++); |
| } |
| } |
| |
| #define SISUSB_VADDR(x,y) \ |
| ((u16 *)c->vc_origin + \ |
| (y) * sisusb->sisusb_num_columns + \ |
| (x)) |
| |
| #define SISUSB_HADDR(x,y) \ |
| ((u16 *)(sisusb->vrambase + (c->vc_origin - sisusb->scrbuf)) + \ |
| (y) * sisusb->sisusb_num_columns + \ |
| (x)) |
| |
| /* Interface routine */ |
| static void |
| sisusbcon_putc(struct vc_data *c, int ch, int y, int x) |
| { |
| struct sisusb_usb_data *sisusb; |
| |
| sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num); |
| if (!sisusb) |
| return; |
| |
| /* sisusb->lock is down */ |
| if (sisusb_is_inactive(c, sisusb)) { |
| mutex_unlock(&sisusb->lock); |
| return; |
| } |
| |
| |
| sisusb_copy_memory(sisusb, (char *)SISUSB_VADDR(x, y), |
| (long)SISUSB_HADDR(x, y), 2); |
| |
| mutex_unlock(&sisusb->lock); |
| } |
| |
| /* Interface routine */ |
| static void |
| sisusbcon_putcs(struct vc_data *c, const unsigned short *s, |
| int count, int y, int x) |
| { |
| struct sisusb_usb_data *sisusb; |
| u16 *dest; |
| int i; |
| |
| sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num); |
| if (!sisusb) |
| return; |
| |
| /* sisusb->lock is down */ |
| |
| /* Need to put the characters into the buffer ourselves, |
| * because the vt does this AFTER calling us. |
| */ |
| |
| dest = SISUSB_VADDR(x, y); |
| |
| for (i = count; i > 0; i--) |
| sisusbcon_writew(sisusbcon_readw(s++), dest++); |
| |
| if (sisusb_is_inactive(c, sisusb)) { |
| mutex_unlock(&sisusb->lock); |
| return; |
| } |
| |
| sisusb_copy_memory(sisusb, (char *)SISUSB_VADDR(x, y), |
| (long)SISUSB_HADDR(x, y), count * 2); |
| |
| mutex_unlock(&sisusb->lock); |
| } |
| |
| /* Interface routine */ |
| static void |
| sisusbcon_clear(struct vc_data *c, int y, int x, int height, int width) |
| { |
| struct sisusb_usb_data *sisusb; |
| u16 eattr = c->vc_video_erase_char; |
| int i, length, cols; |
| u16 *dest; |
| |
| if (width <= 0 || height <= 0) |
| return; |
| |
| sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num); |
| if (!sisusb) |
| return; |
| |
| /* sisusb->lock is down */ |
| |
| /* Need to clear buffer ourselves, because the vt does |
| * this AFTER calling us. |
| */ |
| |
| dest = SISUSB_VADDR(x, y); |
| |
| cols = sisusb->sisusb_num_columns; |
| |
| if (width > cols) |
| width = cols; |
| |
| if (x == 0 && width >= c->vc_cols) { |
| |
| sisusbcon_memsetw(dest, eattr, height * cols * 2); |
| |
| } else { |
| |
| for (i = height; i > 0; i--, dest += cols) |
| sisusbcon_memsetw(dest, eattr, width * 2); |
| |
| } |
| |
| if (sisusb_is_inactive(c, sisusb)) { |
| mutex_unlock(&sisusb->lock); |
| return; |
| } |
| |
| length = ((height * cols) - x - (cols - width - x)) * 2; |
| |
| |
| sisusb_copy_memory(sisusb, (unsigned char *)SISUSB_VADDR(x, y), |
| (long)SISUSB_HADDR(x, y), length); |
| |
| mutex_unlock(&sisusb->lock); |
| } |
| |
| /* interface routine */ |
| static int |
| sisusbcon_switch(struct vc_data *c) |
| { |
| struct sisusb_usb_data *sisusb; |
| int length; |
| |
| /* Returnvalue 0 means we have fully restored screen, |
| * and vt doesn't need to call do_update_region(). |
| * Returnvalue != 0 naturally means the opposite. |
| */ |
| |
| sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num); |
| if (!sisusb) |
| return 0; |
| |
| /* sisusb->lock is down */ |
| |
| /* Don't write to screen if in gfx mode */ |
| if (sisusb_is_inactive(c, sisusb)) { |
| mutex_unlock(&sisusb->lock); |
| return 0; |
| } |
| |
| /* That really should not happen. It would mean we are |
| * being called while the vc is using its private buffer |
| * as origin. |
| */ |
| if (c->vc_origin == (unsigned long)c->vc_screenbuf) { |
| mutex_unlock(&sisusb->lock); |
| dev_dbg(&sisusb->sisusb_dev->dev, "ASSERT ORIGIN != SCREENBUF!\n"); |
| return 0; |
| } |
| |
| /* Check that we don't copy too much */ |
| length = min((int)c->vc_screenbuf_size, |
| (int)(sisusb->scrbuf + sisusb->scrbuf_size - c->vc_origin)); |
| |
| /* Restore the screen contents */ |
| sisusbcon_memcpyw((u16 *)c->vc_origin, (u16 *)c->vc_screenbuf, |
| length); |
| |
| sisusb_copy_memory(sisusb, (unsigned char *)c->vc_origin, |
| (long)SISUSB_HADDR(0, 0), |
| length); |
| |
| mutex_unlock(&sisusb->lock); |
| |
| return 0; |
| } |
| |
| /* interface routine */ |
| static void |
| sisusbcon_save_screen(struct vc_data *c) |
| { |
| struct sisusb_usb_data *sisusb; |
| int length; |
| |
| /* Save the current screen contents to vc's private |
| * buffer. |
| */ |
| |
| sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num); |
| if (!sisusb) |
| return; |
| |
| /* sisusb->lock is down */ |
| |
| if (sisusb_is_inactive(c, sisusb)) { |
| mutex_unlock(&sisusb->lock); |
| return; |
| } |
| |
| /* Check that we don't copy too much */ |
| length = min((int)c->vc_screenbuf_size, |
| (int)(sisusb->scrbuf + sisusb->scrbuf_size - c->vc_origin)); |
| |
| /* Save the screen contents to vc's private buffer */ |
| sisusbcon_memcpyw((u16 *)c->vc_screenbuf, (u16 *)c->vc_origin, |
| length); |
| |
| mutex_unlock(&sisusb->lock); |
| } |
| |
| /* interface routine */ |
| static void |
| sisusbcon_set_palette(struct vc_data *c, const unsigned char *table) |
| { |
| struct sisusb_usb_data *sisusb; |
| int i, j; |
| |
| /* Return value not used by vt */ |
| |
| if (!con_is_visible(c)) |
| return; |
| |
| sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num); |
| if (!sisusb) |
| return; |
| |
| /* sisusb->lock is down */ |
| |
| if (sisusb_is_inactive(c, sisusb)) { |
| mutex_unlock(&sisusb->lock); |
| return; |
| } |
| |
| for (i = j = 0; i < 16; i++) { |
| if (sisusb_setreg(sisusb, SISCOLIDX, table[i])) |
| break; |
| if (sisusb_setreg(sisusb, SISCOLDATA, c->vc_palette[j++] >> 2)) |
| break; |
| if (sisusb_setreg(sisusb, SISCOLDATA, c->vc_palette[j++] >> 2)) |
| break; |
| if (sisusb_setreg(sisusb, SISCOLDATA, c->vc_palette[j++] >> 2)) |
| break; |
| } |
| |
| mutex_unlock(&sisusb->lock); |
| } |
| |
| /* interface routine */ |
| static int |
| sisusbcon_blank(struct vc_data *c, int blank, int mode_switch) |
| { |
| struct sisusb_usb_data *sisusb; |
| u8 sr1, cr17, pmreg, cr63; |
| int ret = 0; |
| |
| sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num); |
| if (!sisusb) |
| return 0; |
| |
| /* sisusb->lock is down */ |
| |
| if (mode_switch) |
| sisusb->is_gfx = blank ? 1 : 0; |
| |
| if (sisusb_is_inactive(c, sisusb)) { |
| mutex_unlock(&sisusb->lock); |
| return 0; |
| } |
| |
| switch (blank) { |
| |
| case 1: /* Normal blanking: Clear screen */ |
| case -1: |
| sisusbcon_memsetw((u16 *)c->vc_origin, |
| c->vc_video_erase_char, |
| c->vc_screenbuf_size); |
| sisusb_copy_memory(sisusb, |
| (unsigned char *)c->vc_origin, |
| (u32)(sisusb->vrambase + |
| (c->vc_origin - sisusb->scrbuf)), |
| c->vc_screenbuf_size); |
| sisusb->con_blanked = 1; |
| ret = 1; |
| break; |
| |
| default: /* VESA blanking */ |
| switch (blank) { |
| case 0: /* Unblank */ |
| sr1 = 0x00; |
| cr17 = 0x80; |
| pmreg = 0x00; |
| cr63 = 0x00; |
| ret = 1; |
| sisusb->con_blanked = 0; |
| break; |
| case VESA_VSYNC_SUSPEND + 1: |
| sr1 = 0x20; |
| cr17 = 0x80; |
| pmreg = 0x80; |
| cr63 = 0x40; |
| break; |
| case VESA_HSYNC_SUSPEND + 1: |
| sr1 = 0x20; |
| cr17 = 0x80; |
| pmreg = 0x40; |
| cr63 = 0x40; |
| break; |
| case VESA_POWERDOWN + 1: |
| sr1 = 0x20; |
| cr17 = 0x00; |
| pmreg = 0xc0; |
| cr63 = 0x40; |
| break; |
| default: |
| mutex_unlock(&sisusb->lock); |
| return -EINVAL; |
| } |
| |
| sisusb_setidxregandor(sisusb, SISSR, 0x01, ~0x20, sr1); |
| sisusb_setidxregandor(sisusb, SISCR, 0x17, 0x7f, cr17); |
| sisusb_setidxregandor(sisusb, SISSR, 0x1f, 0x3f, pmreg); |
| sisusb_setidxregandor(sisusb, SISCR, 0x63, 0xbf, cr63); |
| |
| } |
| |
| mutex_unlock(&sisusb->lock); |
| |
| return ret; |
| } |
| |
| /* interface routine */ |
| static void |
| sisusbcon_scrolldelta(struct vc_data *c, int lines) |
| { |
| struct sisusb_usb_data *sisusb; |
| |
| sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num); |
| if (!sisusb) |
| return; |
| |
| /* sisusb->lock is down */ |
| |
| if (sisusb_is_inactive(c, sisusb)) { |
| mutex_unlock(&sisusb->lock); |
| return; |
| } |
| |
| vc_scrolldelta_helper(c, lines, sisusb->con_rolled_over, |
| (void *)sisusb->scrbuf, sisusb->scrbuf_size); |
| |
| sisusbcon_set_start_address(sisusb, c); |
| |
| mutex_unlock(&sisusb->lock); |
| } |
| |
| /* Interface routine */ |
| static void |
| sisusbcon_cursor(struct vc_data *c, int mode) |
| { |
| struct sisusb_usb_data *sisusb; |
| int from, to, baseline; |
| |
| sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num); |
| if (!sisusb) |
| return; |
| |
| /* sisusb->lock is down */ |
| |
| if (sisusb_is_inactive(c, sisusb)) { |
| mutex_unlock(&sisusb->lock); |
| return; |
| } |
| |
| if (c->vc_origin != c->vc_visible_origin) { |
| c->vc_visible_origin = c->vc_origin; |
| sisusbcon_set_start_address(sisusb, c); |
| } |
| |
| if (mode == CM_ERASE) { |
| sisusb_setidxregor(sisusb, SISCR, 0x0a, 0x20); |
| sisusb->sisusb_cursor_size_to = -1; |
| mutex_unlock(&sisusb->lock); |
| return; |
| } |
| |
| sisusb_set_cursor(sisusb, (c->vc_pos - sisusb->scrbuf) / 2); |
| |
| baseline = c->vc_font.height - (c->vc_font.height < 10 ? 1 : 2); |
| |
| switch (c->vc_cursor_type & 0x0f) { |
| case CUR_BLOCK: from = 1; |
| to = c->vc_font.height; |
| break; |
| case CUR_TWO_THIRDS: from = c->vc_font.height / 3; |
| to = baseline; |
| break; |
| case CUR_LOWER_HALF: from = c->vc_font.height / 2; |
| to = baseline; |
| break; |
| case CUR_LOWER_THIRD: from = (c->vc_font.height * 2) / 3; |
| to = baseline; |
| break; |
| case CUR_NONE: from = 31; |
| to = 30; |
| break; |
| default: |
| case CUR_UNDERLINE: from = baseline - 1; |
| to = baseline; |
| break; |
| } |
| |
| if (sisusb->sisusb_cursor_size_from != from || |
| sisusb->sisusb_cursor_size_to != to) { |
| |
| sisusb_setidxreg(sisusb, SISCR, 0x0a, from); |
| sisusb_setidxregandor(sisusb, SISCR, 0x0b, 0xe0, to); |
| |
| sisusb->sisusb_cursor_size_from = from; |
| sisusb->sisusb_cursor_size_to = to; |
| } |
| |
| mutex_unlock(&sisusb->lock); |
| } |
| |
| static bool |
| sisusbcon_scroll_area(struct vc_data *c, struct sisusb_usb_data *sisusb, |
| unsigned int t, unsigned int b, enum con_scroll dir, |
| unsigned int lines) |
| { |
| int cols = sisusb->sisusb_num_columns; |
| int length = ((b - t) * cols) * 2; |
| u16 eattr = c->vc_video_erase_char; |
| |
| /* sisusb->lock is down */ |
| |
| /* Scroll an area which does not match the |
| * visible screen's dimensions. This needs |
| * to be done separately, as it does not |
| * use hardware panning. |
| */ |
| |
| switch (dir) { |
| |
| case SM_UP: |
| sisusbcon_memmovew(SISUSB_VADDR(0, t), |
| SISUSB_VADDR(0, t + lines), |
| (b - t - lines) * cols * 2); |
| sisusbcon_memsetw(SISUSB_VADDR(0, b - lines), eattr, |
| lines * cols * 2); |
| break; |
| |
| case SM_DOWN: |
| sisusbcon_memmovew(SISUSB_VADDR(0, t + lines), |
| SISUSB_VADDR(0, t), |
| (b - t - lines) * cols * 2); |
| sisusbcon_memsetw(SISUSB_VADDR(0, t), eattr, |
| lines * cols * 2); |
| break; |
| } |
| |
| sisusb_copy_memory(sisusb, (char *)SISUSB_VADDR(0, t), |
| (long)SISUSB_HADDR(0, t), length); |
| |
| mutex_unlock(&sisusb->lock); |
| |
| return 1; |
| } |
| |
| /* Interface routine */ |
| static bool |
| sisusbcon_scroll(struct vc_data *c, unsigned int t, unsigned int b, |
| enum con_scroll dir, unsigned int lines) |
| { |
| struct sisusb_usb_data *sisusb; |
| u16 eattr = c->vc_video_erase_char; |
| int copyall = 0; |
| unsigned long oldorigin; |
| unsigned int delta = lines * c->vc_size_row; |
| u32 originoffset; |
| |
| /* Returning != 0 means we have done the scrolling successfully. |
| * Returning 0 makes vt do the scrolling on its own. |
| * Note that con_scroll is only called if the console is |
| * visible. In that case, the origin should be our buffer, |
| * not the vt's private one. |
| */ |
| |
| if (!lines) |
| return true; |
| |
| sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num); |
| if (!sisusb) |
| return false; |
| |
| /* sisusb->lock is down */ |
| |
| if (sisusb_is_inactive(c, sisusb)) { |
| mutex_unlock(&sisusb->lock); |
| return false; |
| } |
| |
| /* Special case */ |
| if (t || b != c->vc_rows) |
| return sisusbcon_scroll_area(c, sisusb, t, b, dir, lines); |
| |
| if (c->vc_origin != c->vc_visible_origin) { |
| c->vc_visible_origin = c->vc_origin; |
| sisusbcon_set_start_address(sisusb, c); |
| } |
| |
| /* limit amount to maximum realistic size */ |
| if (lines > c->vc_rows) |
| lines = c->vc_rows; |
| |
| oldorigin = c->vc_origin; |
| |
| switch (dir) { |
| |
| case SM_UP: |
| |
| if (c->vc_scr_end + delta >= |
| sisusb->scrbuf + sisusb->scrbuf_size) { |
| sisusbcon_memcpyw((u16 *)sisusb->scrbuf, |
| (u16 *)(oldorigin + delta), |
| c->vc_screenbuf_size - delta); |
| c->vc_origin = sisusb->scrbuf; |
| sisusb->con_rolled_over = oldorigin - sisusb->scrbuf; |
| copyall = 1; |
| } else |
| c->vc_origin += delta; |
| |
| sisusbcon_memsetw( |
| (u16 *)(c->vc_origin + c->vc_screenbuf_size - delta), |
| eattr, delta); |
| |
| break; |
| |
| case SM_DOWN: |
| |
| if (oldorigin - delta < sisusb->scrbuf) { |
| sisusbcon_memmovew((u16 *)(sisusb->scrbuf + |
| sisusb->scrbuf_size - |
| c->vc_screenbuf_size + |
| delta), |
| (u16 *)oldorigin, |
| c->vc_screenbuf_size - delta); |
| c->vc_origin = sisusb->scrbuf + |
| sisusb->scrbuf_size - |
| c->vc_screenbuf_size; |
| sisusb->con_rolled_over = 0; |
| copyall = 1; |
| } else |
| c->vc_origin -= delta; |
| |
| c->vc_scr_end = c->vc_origin + c->vc_screenbuf_size; |
| |
| scr_memsetw((u16 *)(c->vc_origin), eattr, delta); |
| |
| break; |
| } |
| |
| originoffset = (u32)(c->vc_origin - sisusb->scrbuf); |
| |
| if (copyall) |
| sisusb_copy_memory(sisusb, |
| (char *)c->vc_origin, |
| (u32)(sisusb->vrambase + originoffset), |
| c->vc_screenbuf_size); |
| else if (dir == SM_UP) |
| sisusb_copy_memory(sisusb, |
| (char *)c->vc_origin + c->vc_screenbuf_size - delta, |
| (u32)sisusb->vrambase + originoffset + |
| c->vc_screenbuf_size - delta, |
| delta); |
| else |
| sisusb_copy_memory(sisusb, |
| (char *)c->vc_origin, |
| (u32)(sisusb->vrambase + originoffset), |
| delta); |
| |
| c->vc_scr_end = c->vc_origin + c->vc_screenbuf_size; |
| c->vc_visible_origin = c->vc_origin; |
| |
| sisusbcon_set_start_address(sisusb, c); |
| |
| c->vc_pos = c->vc_pos - oldorigin + c->vc_origin; |
| |
| mutex_unlock(&sisusb->lock); |
| |
| return true; |
| } |
| |
| /* Interface routine */ |
| static int |
| sisusbcon_set_origin(struct vc_data *c) |
| { |
| struct sisusb_usb_data *sisusb; |
| |
| /* Returning != 0 means we were successful. |
| * Returning 0 will vt make to use its own |
| * screenbuffer as the origin. |
| */ |
| |
| sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num); |
| if (!sisusb) |
| return 0; |
| |
| /* sisusb->lock is down */ |
| |
| if (sisusb_is_inactive(c, sisusb) || sisusb->con_blanked) { |
| mutex_unlock(&sisusb->lock); |
| return 0; |
| } |
| |
| c->vc_origin = c->vc_visible_origin = sisusb->scrbuf; |
| |
| sisusbcon_set_start_address(sisusb, c); |
| |
| sisusb->con_rolled_over = 0; |
| |
| mutex_unlock(&sisusb->lock); |
| |
| return 1; |
| } |
| |
| /* Interface routine */ |
| static int |
| sisusbcon_resize(struct vc_data *c, unsigned int newcols, unsigned int newrows, |
| unsigned int user) |
| { |
| struct sisusb_usb_data *sisusb; |
| int fh; |
| |
| sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num); |
| if (!sisusb) |
| return -ENODEV; |
| |
| fh = sisusb->current_font_height; |
| |
| mutex_unlock(&sisusb->lock); |
| |
| /* We are quite unflexible as regards resizing. The vt code |
| * handles sizes where the line length isn't equal the pitch |
| * quite badly. As regards the rows, our panning tricks only |
| * work well if the number of rows equals the visible number |
| * of rows. |
| */ |
| |
| if (newcols != 80 || c->vc_scan_lines / fh != newrows) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| int |
| sisusbcon_do_font_op(struct sisusb_usb_data *sisusb, int set, int slot, |
| u8 *arg, int cmapsz, int ch512, int dorecalc, |
| struct vc_data *c, int fh, int uplock) |
| { |
| int font_select = 0x00, i, err = 0; |
| u32 offset = 0; |
| u8 dummy; |
| |
| /* sisusb->lock is down */ |
| |
| /* |
| * The default font is kept in slot 0. |
| * A user font is loaded in slot 2 (256 ch) |
| * or 2+3 (512 ch). |
| */ |
| |
| if ((slot != 0 && slot != 2) || !fh) { |
| if (uplock) |
| mutex_unlock(&sisusb->lock); |
| return -EINVAL; |
| } |
| |
| if (set) |
| sisusb->font_slot = slot; |
| |
| /* Default font is always 256 */ |
| if (slot == 0) |
| ch512 = 0; |
| else |
| offset = 4 * cmapsz; |
| |
| font_select = (slot == 0) ? 0x00 : (ch512 ? 0x0e : 0x0a); |
| |
| err |= sisusb_setidxreg(sisusb, SISSR, 0x00, 0x01); /* Reset */ |
| err |= sisusb_setidxreg(sisusb, SISSR, 0x02, 0x04); /* Write to plane 2 */ |
| err |= sisusb_setidxreg(sisusb, SISSR, 0x04, 0x07); /* Memory mode a0-bf */ |
| err |= sisusb_setidxreg(sisusb, SISSR, 0x00, 0x03); /* Reset */ |
| |
| if (err) |
| goto font_op_error; |
| |
| err |= sisusb_setidxreg(sisusb, SISGR, 0x04, 0x03); /* Select plane read 2 */ |
| err |= sisusb_setidxreg(sisusb, SISGR, 0x05, 0x00); /* Disable odd/even */ |
| err |= sisusb_setidxreg(sisusb, SISGR, 0x06, 0x00); /* Address range a0-bf */ |
| |
| if (err) |
| goto font_op_error; |
| |
| if (arg) { |
| if (set) |
| for (i = 0; i < cmapsz; i++) { |
| err |= sisusb_writeb(sisusb, |
| sisusb->vrambase + offset + i, |
| arg[i]); |
| if (err) |
| break; |
| } |
| else |
| for (i = 0; i < cmapsz; i++) { |
| err |= sisusb_readb(sisusb, |
| sisusb->vrambase + offset + i, |
| &arg[i]); |
| if (err) |
| break; |
| } |
| |
| /* |
| * In 512-character mode, the character map is not contiguous if |
| * we want to remain EGA compatible -- which we do |
| */ |
| |
| if (ch512) { |
| if (set) |
| for (i = 0; i < cmapsz; i++) { |
| err |= sisusb_writeb(sisusb, |
| sisusb->vrambase + offset + |
| (2 * cmapsz) + i, |
| arg[cmapsz + i]); |
| if (err) |
| break; |
| } |
| else |
| for (i = 0; i < cmapsz; i++) { |
| err |= sisusb_readb(sisusb, |
| sisusb->vrambase + offset + |
| (2 * cmapsz) + i, |
| &arg[cmapsz + i]); |
| if (err) |
| break; |
| } |
| } |
| } |
| |
| if (err) |
| goto font_op_error; |
| |
| err |= sisusb_setidxreg(sisusb, SISSR, 0x00, 0x01); /* Reset */ |
| err |= sisusb_setidxreg(sisusb, SISSR, 0x02, 0x03); /* Write to planes 0+1 */ |
| err |= sisusb_setidxreg(sisusb, SISSR, 0x04, 0x03); /* Memory mode a0-bf */ |
| if (set) |
| sisusb_setidxreg(sisusb, SISSR, 0x03, font_select); |
| err |= sisusb_setidxreg(sisusb, SISSR, 0x00, 0x03); /* Reset end */ |
| |
| if (err) |
| goto font_op_error; |
| |
| err |= sisusb_setidxreg(sisusb, SISGR, 0x04, 0x00); /* Select plane read 0 */ |
| err |= sisusb_setidxreg(sisusb, SISGR, 0x05, 0x10); /* Enable odd/even */ |
| err |= sisusb_setidxreg(sisusb, SISGR, 0x06, 0x06); /* Address range b8-bf */ |
| |
| if (err) |
| goto font_op_error; |
| |
| if ((set) && (ch512 != sisusb->current_font_512)) { |
| |
| /* Font is shared among all our consoles. |
| * And so is the hi_font_mask. |
| */ |
| for (i = 0; i < MAX_NR_CONSOLES; i++) { |
| struct vc_data *d = vc_cons[i].d; |
| if (d && d->vc_sw == &sisusb_con) |
| d->vc_hi_font_mask = ch512 ? 0x0800 : 0; |
| } |
| |
| sisusb->current_font_512 = ch512; |
| |
| /* color plane enable register: |
| 256-char: enable intensity bit |
| 512-char: disable intensity bit */ |
| sisusb_getreg(sisusb, SISINPSTAT, &dummy); |
| sisusb_setreg(sisusb, SISAR, 0x12); |
| sisusb_setreg(sisusb, SISAR, ch512 ? 0x07 : 0x0f); |
| |
| sisusb_getreg(sisusb, SISINPSTAT, &dummy); |
| sisusb_setreg(sisusb, SISAR, 0x20); |
| sisusb_getreg(sisusb, SISINPSTAT, &dummy); |
| } |
| |
| if (dorecalc) { |
| |
| /* |
| * Adjust the screen to fit a font of a certain height |
| */ |
| |
| unsigned char ovr, vde, fsr; |
| int rows = 0, maxscan = 0; |
| |
| if (c) { |
| |
| /* Number of video rows */ |
| rows = c->vc_scan_lines / fh; |
| /* Scan lines to actually display-1 */ |
| maxscan = rows * fh - 1; |
| |
| /*printk(KERN_DEBUG "sisusb recalc rows %d maxscan %d fh %d sl %d\n", |
| rows, maxscan, fh, c->vc_scan_lines);*/ |
| |
| sisusb_getidxreg(sisusb, SISCR, 0x07, &ovr); |
| vde = maxscan & 0xff; |
| ovr = (ovr & 0xbd) | |
| ((maxscan & 0x100) >> 7) | |
| ((maxscan & 0x200) >> 3); |
| sisusb_setidxreg(sisusb, SISCR, 0x07, ovr); |
| sisusb_setidxreg(sisusb, SISCR, 0x12, vde); |
| |
| } |
| |
| sisusb_getidxreg(sisusb, SISCR, 0x09, &fsr); |
| fsr = (fsr & 0xe0) | (fh - 1); |
| sisusb_setidxreg(sisusb, SISCR, 0x09, fsr); |
| sisusb->current_font_height = fh; |
| |
| sisusb->sisusb_cursor_size_from = -1; |
| sisusb->sisusb_cursor_size_to = -1; |
| |
| } |
| |
| if (uplock) |
| mutex_unlock(&sisusb->lock); |
| |
| if (dorecalc && c) { |
| int rows = c->vc_scan_lines / fh; |
| |
| /* Now adjust our consoles' size */ |
| |
| for (i = 0; i < MAX_NR_CONSOLES; i++) { |
| struct vc_data *vc = vc_cons[i].d; |
| |
| if (vc && vc->vc_sw == &sisusb_con) { |
| if (con_is_visible(vc)) { |
| vc->vc_sw->con_cursor(vc, CM_DRAW); |
| } |
| vc->vc_font.height = fh; |
| vc_resize(vc, 0, rows); |
| } |
| } |
| } |
| |
| return 0; |
| |
| font_op_error: |
| if (uplock) |
| mutex_unlock(&sisusb->lock); |
| |
| return -EIO; |
| } |
| |
| /* Interface routine */ |
| static int |
| sisusbcon_font_set(struct vc_data *c, struct console_font *font, |
| unsigned flags) |
| { |
| struct sisusb_usb_data *sisusb; |
| unsigned charcount = font->charcount; |
| |
| if (font->width != 8 || (charcount != 256 && charcount != 512)) |
| return -EINVAL; |
| |
| sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num); |
| if (!sisusb) |
| return -ENODEV; |
| |
| /* sisusb->lock is down */ |
| |
| /* Save the user-provided font into a buffer. This |
| * is used for restoring text mode after quitting |
| * from X and for the con_getfont routine. |
| */ |
| if (sisusb->font_backup) { |
| if (sisusb->font_backup_size < charcount) { |
| vfree(sisusb->font_backup); |
| sisusb->font_backup = NULL; |
| } |
| } |
| |
| if (!sisusb->font_backup) |
| sisusb->font_backup = vmalloc(charcount * 32); |
| |
| if (sisusb->font_backup) { |
| memcpy(sisusb->font_backup, font->data, charcount * 32); |
| sisusb->font_backup_size = charcount; |
| sisusb->font_backup_height = font->height; |
| sisusb->font_backup_512 = (charcount == 512) ? 1 : 0; |
| } |
| |
| /* do_font_op ups sisusb->lock */ |
| |
| return sisusbcon_do_font_op(sisusb, 1, 2, font->data, |
| 8192, (charcount == 512), |
| (!(flags & KD_FONT_FLAG_DONT_RECALC)) ? 1 : 0, |
| c, font->height, 1); |
| } |
| |
| /* Interface routine */ |
| static int |
| sisusbcon_font_get(struct vc_data *c, struct console_font *font) |
| { |
| struct sisusb_usb_data *sisusb; |
| |
| sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num); |
| if (!sisusb) |
| return -ENODEV; |
| |
| /* sisusb->lock is down */ |
| |
| font->width = 8; |
| font->height = c->vc_font.height; |
| font->charcount = 256; |
| |
| if (!font->data) { |
| mutex_unlock(&sisusb->lock); |
| return 0; |
| } |
| |
| if (!sisusb->font_backup) { |
| mutex_unlock(&sisusb->lock); |
| return -ENODEV; |
| } |
| |
| /* Copy 256 chars only, like vgacon */ |
| memcpy(font->data, sisusb->font_backup, 256 * 32); |
| |
| mutex_unlock(&sisusb->lock); |
| |
| return 0; |
| } |
| |
| /* |
| * The console `switch' structure for the sisusb console |
| */ |
| |
| static const struct consw sisusb_con = { |
| .owner = THIS_MODULE, |
| .con_startup = sisusbcon_startup, |
| .con_init = sisusbcon_init, |
| .con_deinit = sisusbcon_deinit, |
| .con_clear = sisusbcon_clear, |
| .con_putc = sisusbcon_putc, |
| .con_putcs = sisusbcon_putcs, |
| .con_cursor = sisusbcon_cursor, |
| .con_scroll = sisusbcon_scroll, |
| .con_switch = sisusbcon_switch, |
| .con_blank = sisusbcon_blank, |
| .con_font_set = sisusbcon_font_set, |
| .con_font_get = sisusbcon_font_get, |
| .con_set_palette = sisusbcon_set_palette, |
| .con_scrolldelta = sisusbcon_scrolldelta, |
| .con_build_attr = sisusbcon_build_attr, |
| .con_invert_region = sisusbcon_invert_region, |
| .con_set_origin = sisusbcon_set_origin, |
| .con_save_screen = sisusbcon_save_screen, |
| .con_resize = sisusbcon_resize, |
| }; |
| |
| /* Our very own dummy console driver */ |
| |
| static const char *sisusbdummycon_startup(void) |
| { |
| return "SISUSBVGADUMMY"; |
| } |
| |
| static void sisusbdummycon_init(struct vc_data *vc, int init) |
| { |
| vc->vc_can_do_color = 1; |
| if (init) { |
| vc->vc_cols = 80; |
| vc->vc_rows = 25; |
| } else |
| vc_resize(vc, 80, 25); |
| } |
| |
| static int sisusbdummycon_dummy(void) |
| { |
| return 0; |
| } |
| |
| #define SISUSBCONDUMMY (void *)sisusbdummycon_dummy |
| |
| static const struct consw sisusb_dummy_con = { |
| .owner = THIS_MODULE, |
| .con_startup = sisusbdummycon_startup, |
| .con_init = sisusbdummycon_init, |
| .con_deinit = SISUSBCONDUMMY, |
| .con_clear = SISUSBCONDUMMY, |
| .con_putc = SISUSBCONDUMMY, |
| .con_putcs = SISUSBCONDUMMY, |
| .con_cursor = SISUSBCONDUMMY, |
| .con_scroll = SISUSBCONDUMMY, |
| .con_switch = SISUSBCONDUMMY, |
| .con_blank = SISUSBCONDUMMY, |
| .con_font_set = SISUSBCONDUMMY, |
| .con_font_get = SISUSBCONDUMMY, |
| .con_font_default = SISUSBCONDUMMY, |
| .con_font_copy = SISUSBCONDUMMY, |
| }; |
| |
| int |
| sisusb_console_init(struct sisusb_usb_data *sisusb, int first, int last) |
| { |
| int i, ret; |
| |
| mutex_lock(&sisusb->lock); |
| |
| /* Erm.. that should not happen */ |
| if (sisusb->haveconsole || !sisusb->SiS_Pr) { |
| mutex_unlock(&sisusb->lock); |
| return 1; |
| } |
| |
| sisusb->con_first = first; |
| sisusb->con_last = last; |
| |
| if (first > last || |
| first > MAX_NR_CONSOLES || |
| last > MAX_NR_CONSOLES) { |
| mutex_unlock(&sisusb->lock); |
| return 1; |
| } |
| |
| /* If gfxcore not initialized or no consoles given, quit graciously */ |
| if (!sisusb->gfxinit || first < 1 || last < 1) { |
| mutex_unlock(&sisusb->lock); |
| return 0; |
| } |
| |
| sisusb->sisusb_cursor_loc = -1; |
| sisusb->sisusb_cursor_size_from = -1; |
| sisusb->sisusb_cursor_size_to = -1; |
| |
| /* Set up text mode (and upload default font) */ |
| if (sisusb_reset_text_mode(sisusb, 1)) { |
| mutex_unlock(&sisusb->lock); |
| dev_err(&sisusb->sisusb_dev->dev, "Failed to set up text mode\n"); |
| return 1; |
| } |
| |
| /* Initialize some gfx registers */ |
| sisusb_initialize(sisusb); |
| |
| for (i = first - 1; i <= last - 1; i++) { |
| /* Save sisusb for our interface routines */ |
| mysisusbs[i] = sisusb; |
| } |
| |
| /* Initial console setup */ |
| sisusb->sisusb_num_columns = 80; |
| |
| /* Use a 32K buffer (matches b8000-bffff area) */ |
| sisusb->scrbuf_size = 32 * 1024; |
| |
| /* Allocate screen buffer */ |
| if (!(sisusb->scrbuf = (unsigned long)vmalloc(sisusb->scrbuf_size))) { |
| mutex_unlock(&sisusb->lock); |
| dev_err(&sisusb->sisusb_dev->dev, "Failed to allocate screen buffer\n"); |
| return 1; |
| } |
| |
| mutex_unlock(&sisusb->lock); |
| |
| /* Now grab the desired console(s) */ |
| console_lock(); |
| ret = do_take_over_console(&sisusb_con, first - 1, last - 1, 0); |
| console_unlock(); |
| if (!ret) |
| sisusb->haveconsole = 1; |
| else { |
| for (i = first - 1; i <= last - 1; i++) |
| mysisusbs[i] = NULL; |
| } |
| |
| return ret; |
| } |
| |
| void |
| sisusb_console_exit(struct sisusb_usb_data *sisusb) |
| { |
| int i; |
| |
| /* This is called if the device is disconnected |
| * and while disconnect and lock semaphores |
| * are up. This should be save because we |
| * can't lose our sisusb any other way but by |
| * disconnection (and hence, the disconnect |
| * sema is for protecting all other access |
| * functions from disconnection, not the |
| * other way round). |
| */ |
| |
| /* Now what do we do in case of disconnection: |
| * One alternative would be to simply call |
| * give_up_console(). Nah, not a good idea. |
| * give_up_console() is obviously buggy as it |
| * only discards the consw pointer from the |
| * driver_map, but doesn't adapt vc->vc_sw |
| * of the affected consoles. Hence, the next |
| * call to any of the console functions will |
| * eventually take a trip to oops county. |
| * Also, give_up_console for some reason |
| * doesn't decrement our module refcount. |
| * Instead, we switch our consoles to a private |
| * dummy console. This, of course, keeps our |
| * refcount up as well, but it works perfectly. |
| */ |
| |
| if (sisusb->haveconsole) { |
| for (i = 0; i < MAX_NR_CONSOLES; i++) |
| if (sisusb->havethisconsole[i]) { |
| console_lock(); |
| do_take_over_console(&sisusb_dummy_con, i, i, 0); |
| console_unlock(); |
| /* At this point, con_deinit for all our |
| * consoles is executed by do_take_over_console(). |
| */ |
| } |
| sisusb->haveconsole = 0; |
| } |
| |
| vfree((void *)sisusb->scrbuf); |
| sisusb->scrbuf = 0; |
| |
| vfree(sisusb->font_backup); |
| sisusb->font_backup = NULL; |
| } |
| |
| void __init sisusb_init_concode(void) |
| { |
| int i; |
| |
| for (i = 0; i < MAX_NR_CONSOLES; i++) |
| mysisusbs[i] = NULL; |
| } |
| |
| #endif /* INCL_CON */ |
| |
| |
| |