| /* |
| * arch/cris/arch-v32/drivers/nandflash.c |
| * |
| * Copyright (c) 2004 |
| * |
| * Derived from drivers/mtd/nand/spia.c |
| * Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com) |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| */ |
| |
| #include <linux/slab.h> |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/mtd/mtd.h> |
| #include <linux/mtd/nand.h> |
| #include <linux/mtd/partitions.h> |
| #include <arch/memmap.h> |
| #include <hwregs/reg_map.h> |
| #include <hwregs/reg_rdwr.h> |
| #include <hwregs/gio_defs.h> |
| #include <hwregs/bif_core_defs.h> |
| #include <asm/io.h> |
| |
| #define CE_BIT 4 |
| #define CLE_BIT 5 |
| #define ALE_BIT 6 |
| #define BY_BIT 7 |
| |
| struct mtd_info_wrapper { |
| struct mtd_info info; |
| struct nand_chip chip; |
| }; |
| |
| /* Bitmask for control pins */ |
| #define PIN_BITMASK ((1 << CE_BIT) | (1 << CLE_BIT) | (1 << ALE_BIT)) |
| |
| /* Bitmask for mtd nand control bits */ |
| #define CTRL_BITMASK (NAND_NCE | NAND_CLE | NAND_ALE) |
| |
| |
| static struct mtd_info *crisv32_mtd; |
| /* |
| * hardware specific access to control-lines |
| */ |
| static void crisv32_hwcontrol(struct mtd_info *mtd, int cmd, |
| unsigned int ctrl) |
| { |
| unsigned long flags; |
| reg_gio_rw_pa_dout dout; |
| struct nand_chip *this = mtd->priv; |
| |
| local_irq_save(flags); |
| |
| /* control bits change */ |
| if (ctrl & NAND_CTRL_CHANGE) { |
| dout = REG_RD(gio, regi_gio, rw_pa_dout); |
| dout.data &= ~PIN_BITMASK; |
| |
| #if (CE_BIT == 4 && NAND_NCE == 1 && \ |
| CLE_BIT == 5 && NAND_CLE == 2 && \ |
| ALE_BIT == 6 && NAND_ALE == 4) |
| /* Pins in same order as control bits, but shifted. |
| * Optimize for this case; works for 2.6.18 */ |
| dout.data |= ((ctrl & CTRL_BITMASK) ^ NAND_NCE) << CE_BIT; |
| #else |
| /* the slow way */ |
| if (!(ctrl & NAND_NCE)) |
| dout.data |= (1 << CE_BIT); |
| if (ctrl & NAND_CLE) |
| dout.data |= (1 << CLE_BIT); |
| if (ctrl & NAND_ALE) |
| dout.data |= (1 << ALE_BIT); |
| #endif |
| REG_WR(gio, regi_gio, rw_pa_dout, dout); |
| } |
| |
| /* command to chip */ |
| if (cmd != NAND_CMD_NONE) |
| writeb(cmd, this->IO_ADDR_W); |
| |
| local_irq_restore(flags); |
| } |
| |
| /* |
| * read device ready pin |
| */ |
| static int crisv32_device_ready(struct mtd_info *mtd) |
| { |
| reg_gio_r_pa_din din = REG_RD(gio, regi_gio, r_pa_din); |
| return ((din.data & (1 << BY_BIT)) >> BY_BIT); |
| } |
| |
| /* |
| * Main initialization routine |
| */ |
| struct mtd_info *__init crisv32_nand_flash_probe(void) |
| { |
| void __iomem *read_cs; |
| void __iomem *write_cs; |
| |
| reg_bif_core_rw_grp3_cfg bif_cfg = REG_RD(bif_core, regi_bif_core, |
| rw_grp3_cfg); |
| reg_gio_rw_pa_oe pa_oe = REG_RD(gio, regi_gio, rw_pa_oe); |
| struct mtd_info_wrapper *wrapper; |
| struct nand_chip *this; |
| int err = 0; |
| |
| /* Allocate memory for MTD device structure and private data */ |
| wrapper = kzalloc(sizeof(struct mtd_info_wrapper), GFP_KERNEL); |
| if (!wrapper) { |
| printk(KERN_ERR "Unable to allocate CRISv32 NAND MTD " |
| "device structure.\n"); |
| err = -ENOMEM; |
| return NULL; |
| } |
| |
| read_cs = ioremap(MEM_CSP0_START | MEM_NON_CACHEABLE, 8192); |
| write_cs = ioremap(MEM_CSP1_START | MEM_NON_CACHEABLE, 8192); |
| |
| if (!read_cs || !write_cs) { |
| printk(KERN_ERR "CRISv32 NAND ioremap failed\n"); |
| err = -EIO; |
| goto out_mtd; |
| } |
| |
| /* Get pointer to private data */ |
| this = &wrapper->chip; |
| crisv32_mtd = &wrapper->info; |
| |
| pa_oe.oe |= 1 << CE_BIT; |
| pa_oe.oe |= 1 << ALE_BIT; |
| pa_oe.oe |= 1 << CLE_BIT; |
| pa_oe.oe &= ~(1 << BY_BIT); |
| REG_WR(gio, regi_gio, rw_pa_oe, pa_oe); |
| |
| bif_cfg.gated_csp0 = regk_bif_core_rd; |
| bif_cfg.gated_csp1 = regk_bif_core_wr; |
| REG_WR(bif_core, regi_bif_core, rw_grp3_cfg, bif_cfg); |
| |
| /* Link the private data with the MTD structure */ |
| crisv32_mtd->priv = this; |
| |
| /* Set address of NAND IO lines */ |
| this->IO_ADDR_R = read_cs; |
| this->IO_ADDR_W = write_cs; |
| this->cmd_ctrl = crisv32_hwcontrol; |
| this->dev_ready = crisv32_device_ready; |
| /* 20 us command delay time */ |
| this->chip_delay = 20; |
| this->ecc.mode = NAND_ECC_SOFT; |
| |
| /* Enable the following for a flash based bad block table */ |
| /* this->options = NAND_USE_FLASH_BBT; */ |
| |
| /* Scan to find existance of the device */ |
| if (nand_scan(crisv32_mtd, 1)) { |
| err = -ENXIO; |
| goto out_ior; |
| } |
| |
| return crisv32_mtd; |
| |
| out_ior: |
| iounmap((void *)read_cs); |
| iounmap((void *)write_cs); |
| out_mtd: |
| kfree(wrapper); |
| return NULL; |
| } |
| |