|  | /* | 
|  | * BSS client mode implementation | 
|  | * Copyright 2003-2008, Jouni Malinen <j@w1.fi> | 
|  | * Copyright 2004, Instant802 Networks, Inc. | 
|  | * Copyright 2005, Devicescape Software, Inc. | 
|  | * Copyright 2006-2007	Jiri Benc <jbenc@suse.cz> | 
|  | * Copyright 2007, Michael Wu <flamingice@sourmilk.net> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2 as | 
|  | * published by the Free Software Foundation. | 
|  | */ | 
|  |  | 
|  | #include <linux/delay.h> | 
|  | #include <linux/if_ether.h> | 
|  | #include <linux/skbuff.h> | 
|  | #include <linux/if_arp.h> | 
|  | #include <linux/etherdevice.h> | 
|  | #include <linux/rtnetlink.h> | 
|  | #include <linux/pm_qos_params.h> | 
|  | #include <linux/crc32.h> | 
|  | #include <net/mac80211.h> | 
|  | #include <asm/unaligned.h> | 
|  |  | 
|  | #include "ieee80211_i.h" | 
|  | #include "driver-ops.h" | 
|  | #include "rate.h" | 
|  | #include "led.h" | 
|  |  | 
|  | #define IEEE80211_ASSOC_SCANS_MAX_TRIES 2 | 
|  | #define IEEE80211_AUTH_TIMEOUT (HZ / 5) | 
|  | #define IEEE80211_AUTH_MAX_TRIES 3 | 
|  | #define IEEE80211_ASSOC_TIMEOUT (HZ / 5) | 
|  | #define IEEE80211_ASSOC_MAX_TRIES 3 | 
|  | #define IEEE80211_MONITORING_INTERVAL (2 * HZ) | 
|  | #define IEEE80211_PROBE_WAIT (HZ / 5) | 
|  | #define IEEE80211_PROBE_IDLE_TIME (60 * HZ) | 
|  | #define IEEE80211_RETRY_AUTH_INTERVAL (1 * HZ) | 
|  |  | 
|  | #define TMR_RUNNING_TIMER	0 | 
|  | #define TMR_RUNNING_CHANSW	1 | 
|  |  | 
|  | /* utils */ | 
|  | static int ecw2cw(int ecw) | 
|  | { | 
|  | return (1 << ecw) - 1; | 
|  | } | 
|  |  | 
|  | static u8 *ieee80211_bss_get_ie(struct ieee80211_bss *bss, u8 ie) | 
|  | { | 
|  | u8 *end, *pos; | 
|  |  | 
|  | pos = bss->cbss.information_elements; | 
|  | if (pos == NULL) | 
|  | return NULL; | 
|  | end = pos + bss->cbss.len_information_elements; | 
|  |  | 
|  | while (pos + 1 < end) { | 
|  | if (pos + 2 + pos[1] > end) | 
|  | break; | 
|  | if (pos[0] == ie) | 
|  | return pos; | 
|  | pos += 2 + pos[1]; | 
|  | } | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static int ieee80211_compatible_rates(struct ieee80211_bss *bss, | 
|  | struct ieee80211_supported_band *sband, | 
|  | u32 *rates) | 
|  | { | 
|  | int i, j, count; | 
|  | *rates = 0; | 
|  | count = 0; | 
|  | for (i = 0; i < bss->supp_rates_len; i++) { | 
|  | int rate = (bss->supp_rates[i] & 0x7F) * 5; | 
|  |  | 
|  | for (j = 0; j < sband->n_bitrates; j++) | 
|  | if (sband->bitrates[j].bitrate == rate) { | 
|  | *rates |= BIT(j); | 
|  | count++; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * ieee80211_enable_ht should be called only after the operating band | 
|  | * has been determined as ht configuration depends on the hw's | 
|  | * HT abilities for a specific band. | 
|  | */ | 
|  | static u32 ieee80211_enable_ht(struct ieee80211_sub_if_data *sdata, | 
|  | struct ieee80211_ht_info *hti, | 
|  | u16 ap_ht_cap_flags) | 
|  | { | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct ieee80211_supported_band *sband; | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  | struct sta_info *sta; | 
|  | u32 changed = 0; | 
|  | u16 ht_opmode; | 
|  | bool enable_ht = true, ht_changed; | 
|  | enum nl80211_channel_type channel_type = NL80211_CHAN_NO_HT; | 
|  |  | 
|  | sband = local->hw.wiphy->bands[local->hw.conf.channel->band]; | 
|  |  | 
|  | /* HT is not supported */ | 
|  | if (!sband->ht_cap.ht_supported) | 
|  | enable_ht = false; | 
|  |  | 
|  | /* check that channel matches the right operating channel */ | 
|  | if (local->hw.conf.channel->center_freq != | 
|  | ieee80211_channel_to_frequency(hti->control_chan)) | 
|  | enable_ht = false; | 
|  |  | 
|  | if (enable_ht) { | 
|  | channel_type = NL80211_CHAN_HT20; | 
|  |  | 
|  | if (!(ap_ht_cap_flags & IEEE80211_HT_CAP_40MHZ_INTOLERANT) && | 
|  | (sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) && | 
|  | (hti->ht_param & IEEE80211_HT_PARAM_CHAN_WIDTH_ANY)) { | 
|  | switch(hti->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) { | 
|  | case IEEE80211_HT_PARAM_CHA_SEC_ABOVE: | 
|  | if (!(local->hw.conf.channel->flags & | 
|  | IEEE80211_CHAN_NO_HT40PLUS)) | 
|  | channel_type = NL80211_CHAN_HT40PLUS; | 
|  | break; | 
|  | case IEEE80211_HT_PARAM_CHA_SEC_BELOW: | 
|  | if (!(local->hw.conf.channel->flags & | 
|  | IEEE80211_CHAN_NO_HT40MINUS)) | 
|  | channel_type = NL80211_CHAN_HT40MINUS; | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | ht_changed = conf_is_ht(&local->hw.conf) != enable_ht || | 
|  | channel_type != local->hw.conf.channel_type; | 
|  |  | 
|  | local->oper_channel_type = channel_type; | 
|  |  | 
|  | if (ht_changed) { | 
|  | /* channel_type change automatically detected */ | 
|  | ieee80211_hw_config(local, 0); | 
|  |  | 
|  | rcu_read_lock(); | 
|  |  | 
|  | sta = sta_info_get(local, ifmgd->bssid); | 
|  | if (sta) | 
|  | rate_control_rate_update(local, sband, sta, | 
|  | IEEE80211_RC_HT_CHANGED); | 
|  |  | 
|  | rcu_read_unlock(); | 
|  | } | 
|  |  | 
|  | /* disable HT */ | 
|  | if (!enable_ht) | 
|  | return 0; | 
|  |  | 
|  | ht_opmode = le16_to_cpu(hti->operation_mode); | 
|  |  | 
|  | /* if bss configuration changed store the new one */ | 
|  | if (!sdata->ht_opmode_valid || | 
|  | sdata->vif.bss_conf.ht_operation_mode != ht_opmode) { | 
|  | changed |= BSS_CHANGED_HT; | 
|  | sdata->vif.bss_conf.ht_operation_mode = ht_opmode; | 
|  | sdata->ht_opmode_valid = true; | 
|  | } | 
|  |  | 
|  | return changed; | 
|  | } | 
|  |  | 
|  | /* frame sending functions */ | 
|  |  | 
|  | static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct sk_buff *skb; | 
|  | struct ieee80211_mgmt *mgmt; | 
|  | u8 *pos, *ies, *ht_ie; | 
|  | int i, len, count, rates_len, supp_rates_len; | 
|  | u16 capab; | 
|  | struct ieee80211_bss *bss; | 
|  | int wmm = 0; | 
|  | struct ieee80211_supported_band *sband; | 
|  | u32 rates = 0; | 
|  |  | 
|  | skb = dev_alloc_skb(local->hw.extra_tx_headroom + | 
|  | sizeof(*mgmt) + 200 + ifmgd->extra_ie_len + | 
|  | ifmgd->ssid_len); | 
|  | if (!skb) { | 
|  | printk(KERN_DEBUG "%s: failed to allocate buffer for assoc " | 
|  | "frame\n", sdata->dev->name); | 
|  | return; | 
|  | } | 
|  | skb_reserve(skb, local->hw.extra_tx_headroom); | 
|  |  | 
|  | sband = local->hw.wiphy->bands[local->hw.conf.channel->band]; | 
|  |  | 
|  | capab = ifmgd->capab; | 
|  |  | 
|  | if (local->hw.conf.channel->band == IEEE80211_BAND_2GHZ) { | 
|  | if (!(local->hw.flags & IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE)) | 
|  | capab |= WLAN_CAPABILITY_SHORT_SLOT_TIME; | 
|  | if (!(local->hw.flags & IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE)) | 
|  | capab |= WLAN_CAPABILITY_SHORT_PREAMBLE; | 
|  | } | 
|  |  | 
|  | bss = ieee80211_rx_bss_get(local, ifmgd->bssid, | 
|  | local->hw.conf.channel->center_freq, | 
|  | ifmgd->ssid, ifmgd->ssid_len); | 
|  | if (bss) { | 
|  | if (bss->cbss.capability & WLAN_CAPABILITY_PRIVACY) | 
|  | capab |= WLAN_CAPABILITY_PRIVACY; | 
|  | if (bss->wmm_used) | 
|  | wmm = 1; | 
|  |  | 
|  | /* get all rates supported by the device and the AP as | 
|  | * some APs don't like getting a superset of their rates | 
|  | * in the association request (e.g. D-Link DAP 1353 in | 
|  | * b-only mode) */ | 
|  | rates_len = ieee80211_compatible_rates(bss, sband, &rates); | 
|  |  | 
|  | if ((bss->cbss.capability & WLAN_CAPABILITY_SPECTRUM_MGMT) && | 
|  | (local->hw.flags & IEEE80211_HW_SPECTRUM_MGMT)) | 
|  | capab |= WLAN_CAPABILITY_SPECTRUM_MGMT; | 
|  |  | 
|  | ieee80211_rx_bss_put(local, bss); | 
|  | } else { | 
|  | rates = ~0; | 
|  | rates_len = sband->n_bitrates; | 
|  | } | 
|  |  | 
|  | mgmt = (struct ieee80211_mgmt *) skb_put(skb, 24); | 
|  | memset(mgmt, 0, 24); | 
|  | memcpy(mgmt->da, ifmgd->bssid, ETH_ALEN); | 
|  | memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN); | 
|  | memcpy(mgmt->bssid, ifmgd->bssid, ETH_ALEN); | 
|  |  | 
|  | if (ifmgd->flags & IEEE80211_STA_PREV_BSSID_SET) { | 
|  | skb_put(skb, 10); | 
|  | mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | | 
|  | IEEE80211_STYPE_REASSOC_REQ); | 
|  | mgmt->u.reassoc_req.capab_info = cpu_to_le16(capab); | 
|  | mgmt->u.reassoc_req.listen_interval = | 
|  | cpu_to_le16(local->hw.conf.listen_interval); | 
|  | memcpy(mgmt->u.reassoc_req.current_ap, ifmgd->prev_bssid, | 
|  | ETH_ALEN); | 
|  | } else { | 
|  | skb_put(skb, 4); | 
|  | mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | | 
|  | IEEE80211_STYPE_ASSOC_REQ); | 
|  | mgmt->u.assoc_req.capab_info = cpu_to_le16(capab); | 
|  | mgmt->u.assoc_req.listen_interval = | 
|  | cpu_to_le16(local->hw.conf.listen_interval); | 
|  | } | 
|  |  | 
|  | /* SSID */ | 
|  | ies = pos = skb_put(skb, 2 + ifmgd->ssid_len); | 
|  | *pos++ = WLAN_EID_SSID; | 
|  | *pos++ = ifmgd->ssid_len; | 
|  | memcpy(pos, ifmgd->ssid, ifmgd->ssid_len); | 
|  |  | 
|  | /* add all rates which were marked to be used above */ | 
|  | supp_rates_len = rates_len; | 
|  | if (supp_rates_len > 8) | 
|  | supp_rates_len = 8; | 
|  |  | 
|  | len = sband->n_bitrates; | 
|  | pos = skb_put(skb, supp_rates_len + 2); | 
|  | *pos++ = WLAN_EID_SUPP_RATES; | 
|  | *pos++ = supp_rates_len; | 
|  |  | 
|  | count = 0; | 
|  | for (i = 0; i < sband->n_bitrates; i++) { | 
|  | if (BIT(i) & rates) { | 
|  | int rate = sband->bitrates[i].bitrate; | 
|  | *pos++ = (u8) (rate / 5); | 
|  | if (++count == 8) | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (rates_len > count) { | 
|  | pos = skb_put(skb, rates_len - count + 2); | 
|  | *pos++ = WLAN_EID_EXT_SUPP_RATES; | 
|  | *pos++ = rates_len - count; | 
|  |  | 
|  | for (i++; i < sband->n_bitrates; i++) { | 
|  | if (BIT(i) & rates) { | 
|  | int rate = sband->bitrates[i].bitrate; | 
|  | *pos++ = (u8) (rate / 5); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | if (capab & WLAN_CAPABILITY_SPECTRUM_MGMT) { | 
|  | /* 1. power capabilities */ | 
|  | pos = skb_put(skb, 4); | 
|  | *pos++ = WLAN_EID_PWR_CAPABILITY; | 
|  | *pos++ = 2; | 
|  | *pos++ = 0; /* min tx power */ | 
|  | *pos++ = local->hw.conf.channel->max_power; /* max tx power */ | 
|  |  | 
|  | /* 2. supported channels */ | 
|  | /* TODO: get this in reg domain format */ | 
|  | pos = skb_put(skb, 2 * sband->n_channels + 2); | 
|  | *pos++ = WLAN_EID_SUPPORTED_CHANNELS; | 
|  | *pos++ = 2 * sband->n_channels; | 
|  | for (i = 0; i < sband->n_channels; i++) { | 
|  | *pos++ = ieee80211_frequency_to_channel( | 
|  | sband->channels[i].center_freq); | 
|  | *pos++ = 1; /* one channel in the subband*/ | 
|  | } | 
|  | } | 
|  |  | 
|  | if (ifmgd->extra_ie) { | 
|  | pos = skb_put(skb, ifmgd->extra_ie_len); | 
|  | memcpy(pos, ifmgd->extra_ie, ifmgd->extra_ie_len); | 
|  | } | 
|  |  | 
|  | if (wmm && (ifmgd->flags & IEEE80211_STA_WMM_ENABLED)) { | 
|  | pos = skb_put(skb, 9); | 
|  | *pos++ = WLAN_EID_VENDOR_SPECIFIC; | 
|  | *pos++ = 7; /* len */ | 
|  | *pos++ = 0x00; /* Microsoft OUI 00:50:F2 */ | 
|  | *pos++ = 0x50; | 
|  | *pos++ = 0xf2; | 
|  | *pos++ = 2; /* WME */ | 
|  | *pos++ = 0; /* WME info */ | 
|  | *pos++ = 1; /* WME ver */ | 
|  | *pos++ = 0; | 
|  | } | 
|  |  | 
|  | /* wmm support is a must to HT */ | 
|  | /* | 
|  | * IEEE802.11n does not allow TKIP/WEP as pairwise | 
|  | * ciphers in HT mode. We still associate in non-ht | 
|  | * mode (11a/b/g) if any one of these ciphers is | 
|  | * configured as pairwise. | 
|  | */ | 
|  | if (wmm && (ifmgd->flags & IEEE80211_STA_WMM_ENABLED) && | 
|  | sband->ht_cap.ht_supported && | 
|  | (ht_ie = ieee80211_bss_get_ie(bss, WLAN_EID_HT_INFORMATION)) && | 
|  | ht_ie[1] >= sizeof(struct ieee80211_ht_info) && | 
|  | (!(ifmgd->flags & IEEE80211_STA_TKIP_WEP_USED))) { | 
|  | struct ieee80211_ht_info *ht_info = | 
|  | (struct ieee80211_ht_info *)(ht_ie + 2); | 
|  | u16 cap = sband->ht_cap.cap; | 
|  | __le16 tmp; | 
|  | u32 flags = local->hw.conf.channel->flags; | 
|  |  | 
|  | switch (ht_info->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) { | 
|  | case IEEE80211_HT_PARAM_CHA_SEC_ABOVE: | 
|  | if (flags & IEEE80211_CHAN_NO_HT40PLUS) { | 
|  | cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; | 
|  | cap &= ~IEEE80211_HT_CAP_SGI_40; | 
|  | } | 
|  | break; | 
|  | case IEEE80211_HT_PARAM_CHA_SEC_BELOW: | 
|  | if (flags & IEEE80211_CHAN_NO_HT40MINUS) { | 
|  | cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; | 
|  | cap &= ~IEEE80211_HT_CAP_SGI_40; | 
|  | } | 
|  | break; | 
|  | } | 
|  |  | 
|  | tmp = cpu_to_le16(cap); | 
|  | pos = skb_put(skb, sizeof(struct ieee80211_ht_cap)+2); | 
|  | *pos++ = WLAN_EID_HT_CAPABILITY; | 
|  | *pos++ = sizeof(struct ieee80211_ht_cap); | 
|  | memset(pos, 0, sizeof(struct ieee80211_ht_cap)); | 
|  | memcpy(pos, &tmp, sizeof(u16)); | 
|  | pos += sizeof(u16); | 
|  | /* TODO: needs a define here for << 2 */ | 
|  | *pos++ = sband->ht_cap.ampdu_factor | | 
|  | (sband->ht_cap.ampdu_density << 2); | 
|  | memcpy(pos, &sband->ht_cap.mcs, sizeof(sband->ht_cap.mcs)); | 
|  | } | 
|  |  | 
|  | kfree(ifmgd->assocreq_ies); | 
|  | ifmgd->assocreq_ies_len = (skb->data + skb->len) - ies; | 
|  | ifmgd->assocreq_ies = kmalloc(ifmgd->assocreq_ies_len, GFP_KERNEL); | 
|  | if (ifmgd->assocreq_ies) | 
|  | memcpy(ifmgd->assocreq_ies, ies, ifmgd->assocreq_ies_len); | 
|  |  | 
|  | ieee80211_tx_skb(sdata, skb, 0); | 
|  | } | 
|  |  | 
|  |  | 
|  | static void ieee80211_send_deauth_disassoc(struct ieee80211_sub_if_data *sdata, | 
|  | u16 stype, u16 reason) | 
|  | { | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  | struct sk_buff *skb; | 
|  | struct ieee80211_mgmt *mgmt; | 
|  |  | 
|  | skb = dev_alloc_skb(local->hw.extra_tx_headroom + sizeof(*mgmt)); | 
|  | if (!skb) { | 
|  | printk(KERN_DEBUG "%s: failed to allocate buffer for " | 
|  | "deauth/disassoc frame\n", sdata->dev->name); | 
|  | return; | 
|  | } | 
|  | skb_reserve(skb, local->hw.extra_tx_headroom); | 
|  |  | 
|  | mgmt = (struct ieee80211_mgmt *) skb_put(skb, 24); | 
|  | memset(mgmt, 0, 24); | 
|  | memcpy(mgmt->da, ifmgd->bssid, ETH_ALEN); | 
|  | memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN); | 
|  | memcpy(mgmt->bssid, ifmgd->bssid, ETH_ALEN); | 
|  | mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | stype); | 
|  | skb_put(skb, 2); | 
|  | /* u.deauth.reason_code == u.disassoc.reason_code */ | 
|  | mgmt->u.deauth.reason_code = cpu_to_le16(reason); | 
|  |  | 
|  | if (stype == IEEE80211_STYPE_DEAUTH) | 
|  | cfg80211_send_deauth(sdata->dev, (u8 *) mgmt, skb->len); | 
|  | else | 
|  | cfg80211_send_disassoc(sdata->dev, (u8 *) mgmt, skb->len); | 
|  | ieee80211_tx_skb(sdata, skb, ifmgd->flags & IEEE80211_STA_MFP_ENABLED); | 
|  | } | 
|  |  | 
|  | void ieee80211_send_pspoll(struct ieee80211_local *local, | 
|  | struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  | struct ieee80211_pspoll *pspoll; | 
|  | struct sk_buff *skb; | 
|  | u16 fc; | 
|  |  | 
|  | skb = dev_alloc_skb(local->hw.extra_tx_headroom + sizeof(*pspoll)); | 
|  | if (!skb) { | 
|  | printk(KERN_DEBUG "%s: failed to allocate buffer for " | 
|  | "pspoll frame\n", sdata->dev->name); | 
|  | return; | 
|  | } | 
|  | skb_reserve(skb, local->hw.extra_tx_headroom); | 
|  |  | 
|  | pspoll = (struct ieee80211_pspoll *) skb_put(skb, sizeof(*pspoll)); | 
|  | memset(pspoll, 0, sizeof(*pspoll)); | 
|  | fc = IEEE80211_FTYPE_CTL | IEEE80211_STYPE_PSPOLL | IEEE80211_FCTL_PM; | 
|  | pspoll->frame_control = cpu_to_le16(fc); | 
|  | pspoll->aid = cpu_to_le16(ifmgd->aid); | 
|  |  | 
|  | /* aid in PS-Poll has its two MSBs each set to 1 */ | 
|  | pspoll->aid |= cpu_to_le16(1 << 15 | 1 << 14); | 
|  |  | 
|  | memcpy(pspoll->bssid, ifmgd->bssid, ETH_ALEN); | 
|  | memcpy(pspoll->ta, sdata->dev->dev_addr, ETH_ALEN); | 
|  |  | 
|  | ieee80211_tx_skb(sdata, skb, 0); | 
|  | } | 
|  |  | 
|  | void ieee80211_send_nullfunc(struct ieee80211_local *local, | 
|  | struct ieee80211_sub_if_data *sdata, | 
|  | int powersave) | 
|  | { | 
|  | struct sk_buff *skb; | 
|  | struct ieee80211_hdr *nullfunc; | 
|  | __le16 fc; | 
|  |  | 
|  | if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION)) | 
|  | return; | 
|  |  | 
|  | skb = dev_alloc_skb(local->hw.extra_tx_headroom + 24); | 
|  | if (!skb) { | 
|  | printk(KERN_DEBUG "%s: failed to allocate buffer for nullfunc " | 
|  | "frame\n", sdata->dev->name); | 
|  | return; | 
|  | } | 
|  | skb_reserve(skb, local->hw.extra_tx_headroom); | 
|  |  | 
|  | nullfunc = (struct ieee80211_hdr *) skb_put(skb, 24); | 
|  | memset(nullfunc, 0, 24); | 
|  | fc = cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_NULLFUNC | | 
|  | IEEE80211_FCTL_TODS); | 
|  | if (powersave) | 
|  | fc |= cpu_to_le16(IEEE80211_FCTL_PM); | 
|  | nullfunc->frame_control = fc; | 
|  | memcpy(nullfunc->addr1, sdata->u.mgd.bssid, ETH_ALEN); | 
|  | memcpy(nullfunc->addr2, sdata->dev->dev_addr, ETH_ALEN); | 
|  | memcpy(nullfunc->addr3, sdata->u.mgd.bssid, ETH_ALEN); | 
|  |  | 
|  | ieee80211_tx_skb(sdata, skb, 0); | 
|  | } | 
|  |  | 
|  | /* spectrum management related things */ | 
|  | static void ieee80211_chswitch_work(struct work_struct *work) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = | 
|  | container_of(work, struct ieee80211_sub_if_data, u.mgd.chswitch_work); | 
|  | struct ieee80211_bss *bss; | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  |  | 
|  | if (!netif_running(sdata->dev)) | 
|  | return; | 
|  |  | 
|  | bss = ieee80211_rx_bss_get(sdata->local, ifmgd->bssid, | 
|  | sdata->local->hw.conf.channel->center_freq, | 
|  | ifmgd->ssid, ifmgd->ssid_len); | 
|  | if (!bss) | 
|  | goto exit; | 
|  |  | 
|  | sdata->local->oper_channel = sdata->local->csa_channel; | 
|  | /* XXX: shouldn't really modify cfg80211-owned data! */ | 
|  | if (!ieee80211_hw_config(sdata->local, IEEE80211_CONF_CHANGE_CHANNEL)) | 
|  | bss->cbss.channel = sdata->local->oper_channel; | 
|  |  | 
|  | ieee80211_rx_bss_put(sdata->local, bss); | 
|  | exit: | 
|  | ifmgd->flags &= ~IEEE80211_STA_CSA_RECEIVED; | 
|  | ieee80211_wake_queues_by_reason(&sdata->local->hw, | 
|  | IEEE80211_QUEUE_STOP_REASON_CSA); | 
|  | } | 
|  |  | 
|  | static void ieee80211_chswitch_timer(unsigned long data) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = | 
|  | (struct ieee80211_sub_if_data *) data; | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  |  | 
|  | if (sdata->local->quiescing) { | 
|  | set_bit(TMR_RUNNING_CHANSW, &ifmgd->timers_running); | 
|  | return; | 
|  | } | 
|  |  | 
|  | queue_work(sdata->local->hw.workqueue, &ifmgd->chswitch_work); | 
|  | } | 
|  |  | 
|  | void ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata, | 
|  | struct ieee80211_channel_sw_ie *sw_elem, | 
|  | struct ieee80211_bss *bss) | 
|  | { | 
|  | struct ieee80211_channel *new_ch; | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  | int new_freq = ieee80211_channel_to_frequency(sw_elem->new_ch_num); | 
|  |  | 
|  | if (ifmgd->state != IEEE80211_STA_MLME_ASSOCIATED) | 
|  | return; | 
|  |  | 
|  | if (sdata->local->sw_scanning || sdata->local->hw_scanning) | 
|  | return; | 
|  |  | 
|  | /* Disregard subsequent beacons if we are already running a timer | 
|  | processing a CSA */ | 
|  |  | 
|  | if (ifmgd->flags & IEEE80211_STA_CSA_RECEIVED) | 
|  | return; | 
|  |  | 
|  | new_ch = ieee80211_get_channel(sdata->local->hw.wiphy, new_freq); | 
|  | if (!new_ch || new_ch->flags & IEEE80211_CHAN_DISABLED) | 
|  | return; | 
|  |  | 
|  | sdata->local->csa_channel = new_ch; | 
|  |  | 
|  | if (sw_elem->count <= 1) { | 
|  | queue_work(sdata->local->hw.workqueue, &ifmgd->chswitch_work); | 
|  | } else { | 
|  | ieee80211_stop_queues_by_reason(&sdata->local->hw, | 
|  | IEEE80211_QUEUE_STOP_REASON_CSA); | 
|  | ifmgd->flags |= IEEE80211_STA_CSA_RECEIVED; | 
|  | mod_timer(&ifmgd->chswitch_timer, | 
|  | jiffies + | 
|  | msecs_to_jiffies(sw_elem->count * | 
|  | bss->cbss.beacon_interval)); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void ieee80211_handle_pwr_constr(struct ieee80211_sub_if_data *sdata, | 
|  | u16 capab_info, u8 *pwr_constr_elem, | 
|  | u8 pwr_constr_elem_len) | 
|  | { | 
|  | struct ieee80211_conf *conf = &sdata->local->hw.conf; | 
|  |  | 
|  | if (!(capab_info & WLAN_CAPABILITY_SPECTRUM_MGMT)) | 
|  | return; | 
|  |  | 
|  | /* Power constraint IE length should be 1 octet */ | 
|  | if (pwr_constr_elem_len != 1) | 
|  | return; | 
|  |  | 
|  | if ((*pwr_constr_elem <= conf->channel->max_power) && | 
|  | (*pwr_constr_elem != sdata->local->power_constr_level)) { | 
|  | sdata->local->power_constr_level = *pwr_constr_elem; | 
|  | ieee80211_hw_config(sdata->local, 0); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* powersave */ | 
|  | static void ieee80211_enable_ps(struct ieee80211_local *local, | 
|  | struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_conf *conf = &local->hw.conf; | 
|  |  | 
|  | /* | 
|  | * If we are scanning right now then the parameters will | 
|  | * take effect when scan finishes. | 
|  | */ | 
|  | if (local->hw_scanning || local->sw_scanning) | 
|  | return; | 
|  |  | 
|  | if (conf->dynamic_ps_timeout > 0 && | 
|  | !(local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_PS)) { | 
|  | mod_timer(&local->dynamic_ps_timer, jiffies + | 
|  | msecs_to_jiffies(conf->dynamic_ps_timeout)); | 
|  | } else { | 
|  | if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK) | 
|  | ieee80211_send_nullfunc(local, sdata, 1); | 
|  | conf->flags |= IEEE80211_CONF_PS; | 
|  | ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void ieee80211_change_ps(struct ieee80211_local *local) | 
|  | { | 
|  | struct ieee80211_conf *conf = &local->hw.conf; | 
|  |  | 
|  | if (local->ps_sdata) { | 
|  | ieee80211_enable_ps(local, local->ps_sdata); | 
|  | } else if (conf->flags & IEEE80211_CONF_PS) { | 
|  | conf->flags &= ~IEEE80211_CONF_PS; | 
|  | ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS); | 
|  | del_timer_sync(&local->dynamic_ps_timer); | 
|  | cancel_work_sync(&local->dynamic_ps_enable_work); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* need to hold RTNL or interface lock */ | 
|  | void ieee80211_recalc_ps(struct ieee80211_local *local, s32 latency) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata, *found = NULL; | 
|  | int count = 0; | 
|  |  | 
|  | if (!(local->hw.flags & IEEE80211_HW_SUPPORTS_PS)) { | 
|  | local->ps_sdata = NULL; | 
|  | return; | 
|  | } | 
|  |  | 
|  | list_for_each_entry(sdata, &local->interfaces, list) { | 
|  | if (!netif_running(sdata->dev)) | 
|  | continue; | 
|  | if (sdata->vif.type != NL80211_IFTYPE_STATION) | 
|  | continue; | 
|  | found = sdata; | 
|  | count++; | 
|  | } | 
|  |  | 
|  | if (count == 1 && found->u.mgd.powersave && | 
|  | (found->u.mgd.flags & IEEE80211_STA_ASSOCIATED) && | 
|  | !(found->u.mgd.flags & IEEE80211_STA_PROBEREQ_POLL)) { | 
|  | s32 beaconint_us; | 
|  |  | 
|  | if (latency < 0) | 
|  | latency = pm_qos_requirement(PM_QOS_NETWORK_LATENCY); | 
|  |  | 
|  | beaconint_us = ieee80211_tu_to_usec( | 
|  | found->vif.bss_conf.beacon_int); | 
|  |  | 
|  | if (beaconint_us > latency) { | 
|  | local->ps_sdata = NULL; | 
|  | } else { | 
|  | u8 dtimper = found->vif.bss_conf.dtim_period; | 
|  | int maxslp = 1; | 
|  |  | 
|  | if (dtimper > 1) | 
|  | maxslp = min_t(int, dtimper, | 
|  | latency / beaconint_us); | 
|  |  | 
|  | local->hw.conf.max_sleep_period = maxslp; | 
|  | local->ps_sdata = found; | 
|  | } | 
|  | } else { | 
|  | local->ps_sdata = NULL; | 
|  | } | 
|  |  | 
|  | ieee80211_change_ps(local); | 
|  | } | 
|  |  | 
|  | void ieee80211_dynamic_ps_disable_work(struct work_struct *work) | 
|  | { | 
|  | struct ieee80211_local *local = | 
|  | container_of(work, struct ieee80211_local, | 
|  | dynamic_ps_disable_work); | 
|  |  | 
|  | if (local->hw.conf.flags & IEEE80211_CONF_PS) { | 
|  | local->hw.conf.flags &= ~IEEE80211_CONF_PS; | 
|  | ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS); | 
|  | } | 
|  |  | 
|  | ieee80211_wake_queues_by_reason(&local->hw, | 
|  | IEEE80211_QUEUE_STOP_REASON_PS); | 
|  | } | 
|  |  | 
|  | void ieee80211_dynamic_ps_enable_work(struct work_struct *work) | 
|  | { | 
|  | struct ieee80211_local *local = | 
|  | container_of(work, struct ieee80211_local, | 
|  | dynamic_ps_enable_work); | 
|  | struct ieee80211_sub_if_data *sdata = local->ps_sdata; | 
|  |  | 
|  | /* can only happen when PS was just disabled anyway */ | 
|  | if (!sdata) | 
|  | return; | 
|  |  | 
|  | if (local->hw.conf.flags & IEEE80211_CONF_PS) | 
|  | return; | 
|  |  | 
|  | if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK) | 
|  | ieee80211_send_nullfunc(local, sdata, 1); | 
|  |  | 
|  | local->hw.conf.flags |= IEEE80211_CONF_PS; | 
|  | ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS); | 
|  | } | 
|  |  | 
|  | void ieee80211_dynamic_ps_timer(unsigned long data) | 
|  | { | 
|  | struct ieee80211_local *local = (void *) data; | 
|  |  | 
|  | if (local->quiescing) | 
|  | return; | 
|  |  | 
|  | queue_work(local->hw.workqueue, &local->dynamic_ps_enable_work); | 
|  | } | 
|  |  | 
|  | /* MLME */ | 
|  | static void ieee80211_sta_wmm_params(struct ieee80211_local *local, | 
|  | struct ieee80211_if_managed *ifmgd, | 
|  | u8 *wmm_param, size_t wmm_param_len) | 
|  | { | 
|  | struct ieee80211_tx_queue_params params; | 
|  | size_t left; | 
|  | int count; | 
|  | u8 *pos; | 
|  |  | 
|  | if (!(ifmgd->flags & IEEE80211_STA_WMM_ENABLED)) | 
|  | return; | 
|  |  | 
|  | if (!wmm_param) | 
|  | return; | 
|  |  | 
|  | if (wmm_param_len < 8 || wmm_param[5] /* version */ != 1) | 
|  | return; | 
|  | count = wmm_param[6] & 0x0f; | 
|  | if (count == ifmgd->wmm_last_param_set) | 
|  | return; | 
|  | ifmgd->wmm_last_param_set = count; | 
|  |  | 
|  | pos = wmm_param + 8; | 
|  | left = wmm_param_len - 8; | 
|  |  | 
|  | memset(¶ms, 0, sizeof(params)); | 
|  |  | 
|  | local->wmm_acm = 0; | 
|  | for (; left >= 4; left -= 4, pos += 4) { | 
|  | int aci = (pos[0] >> 5) & 0x03; | 
|  | int acm = (pos[0] >> 4) & 0x01; | 
|  | int queue; | 
|  |  | 
|  | switch (aci) { | 
|  | case 1: /* AC_BK */ | 
|  | queue = 3; | 
|  | if (acm) | 
|  | local->wmm_acm |= BIT(1) | BIT(2); /* BK/- */ | 
|  | break; | 
|  | case 2: /* AC_VI */ | 
|  | queue = 1; | 
|  | if (acm) | 
|  | local->wmm_acm |= BIT(4) | BIT(5); /* CL/VI */ | 
|  | break; | 
|  | case 3: /* AC_VO */ | 
|  | queue = 0; | 
|  | if (acm) | 
|  | local->wmm_acm |= BIT(6) | BIT(7); /* VO/NC */ | 
|  | break; | 
|  | case 0: /* AC_BE */ | 
|  | default: | 
|  | queue = 2; | 
|  | if (acm) | 
|  | local->wmm_acm |= BIT(0) | BIT(3); /* BE/EE */ | 
|  | break; | 
|  | } | 
|  |  | 
|  | params.aifs = pos[0] & 0x0f; | 
|  | params.cw_max = ecw2cw((pos[1] & 0xf0) >> 4); | 
|  | params.cw_min = ecw2cw(pos[1] & 0x0f); | 
|  | params.txop = get_unaligned_le16(pos + 2); | 
|  | #ifdef CONFIG_MAC80211_VERBOSE_DEBUG | 
|  | printk(KERN_DEBUG "%s: WMM queue=%d aci=%d acm=%d aifs=%d " | 
|  | "cWmin=%d cWmax=%d txop=%d\n", | 
|  | wiphy_name(local->hw.wiphy), queue, aci, acm, | 
|  | params.aifs, params.cw_min, params.cw_max, params.txop); | 
|  | #endif | 
|  | if (drv_conf_tx(local, queue, ¶ms) && local->ops->conf_tx) | 
|  | printk(KERN_DEBUG "%s: failed to set TX queue " | 
|  | "parameters for queue %d\n", | 
|  | wiphy_name(local->hw.wiphy), queue); | 
|  | } | 
|  | } | 
|  |  | 
|  | static u32 ieee80211_handle_bss_capability(struct ieee80211_sub_if_data *sdata, | 
|  | u16 capab, bool erp_valid, u8 erp) | 
|  | { | 
|  | struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf; | 
|  | #ifdef CONFIG_MAC80211_VERBOSE_DEBUG | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  | #endif | 
|  | u32 changed = 0; | 
|  | bool use_protection; | 
|  | bool use_short_preamble; | 
|  | bool use_short_slot; | 
|  |  | 
|  | if (erp_valid) { | 
|  | use_protection = (erp & WLAN_ERP_USE_PROTECTION) != 0; | 
|  | use_short_preamble = (erp & WLAN_ERP_BARKER_PREAMBLE) == 0; | 
|  | } else { | 
|  | use_protection = false; | 
|  | use_short_preamble = !!(capab & WLAN_CAPABILITY_SHORT_PREAMBLE); | 
|  | } | 
|  |  | 
|  | use_short_slot = !!(capab & WLAN_CAPABILITY_SHORT_SLOT_TIME); | 
|  |  | 
|  | if (use_protection != bss_conf->use_cts_prot) { | 
|  | #ifdef CONFIG_MAC80211_VERBOSE_DEBUG | 
|  | if (net_ratelimit()) { | 
|  | printk(KERN_DEBUG "%s: CTS protection %s (BSSID=%pM)\n", | 
|  | sdata->dev->name, | 
|  | use_protection ? "enabled" : "disabled", | 
|  | ifmgd->bssid); | 
|  | } | 
|  | #endif | 
|  | bss_conf->use_cts_prot = use_protection; | 
|  | changed |= BSS_CHANGED_ERP_CTS_PROT; | 
|  | } | 
|  |  | 
|  | if (use_short_preamble != bss_conf->use_short_preamble) { | 
|  | #ifdef CONFIG_MAC80211_VERBOSE_DEBUG | 
|  | if (net_ratelimit()) { | 
|  | printk(KERN_DEBUG "%s: switched to %s barker preamble" | 
|  | " (BSSID=%pM)\n", | 
|  | sdata->dev->name, | 
|  | use_short_preamble ? "short" : "long", | 
|  | ifmgd->bssid); | 
|  | } | 
|  | #endif | 
|  | bss_conf->use_short_preamble = use_short_preamble; | 
|  | changed |= BSS_CHANGED_ERP_PREAMBLE; | 
|  | } | 
|  |  | 
|  | if (use_short_slot != bss_conf->use_short_slot) { | 
|  | #ifdef CONFIG_MAC80211_VERBOSE_DEBUG | 
|  | if (net_ratelimit()) { | 
|  | printk(KERN_DEBUG "%s: switched to %s slot time" | 
|  | " (BSSID=%pM)\n", | 
|  | sdata->dev->name, | 
|  | use_short_slot ? "short" : "long", | 
|  | ifmgd->bssid); | 
|  | } | 
|  | #endif | 
|  | bss_conf->use_short_slot = use_short_slot; | 
|  | changed |= BSS_CHANGED_ERP_SLOT; | 
|  | } | 
|  |  | 
|  | return changed; | 
|  | } | 
|  |  | 
|  | static void ieee80211_sta_send_apinfo(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | union iwreq_data wrqu; | 
|  |  | 
|  | memset(&wrqu, 0, sizeof(wrqu)); | 
|  | if (sdata->u.mgd.flags & IEEE80211_STA_ASSOCIATED) | 
|  | memcpy(wrqu.ap_addr.sa_data, sdata->u.mgd.bssid, ETH_ALEN); | 
|  | wrqu.ap_addr.sa_family = ARPHRD_ETHER; | 
|  | wireless_send_event(sdata->dev, SIOCGIWAP, &wrqu, NULL); | 
|  | } | 
|  |  | 
|  | static void ieee80211_sta_send_associnfo(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  | char *buf; | 
|  | size_t len; | 
|  | int i; | 
|  | union iwreq_data wrqu; | 
|  |  | 
|  | if (!ifmgd->assocreq_ies && !ifmgd->assocresp_ies) | 
|  | return; | 
|  |  | 
|  | buf = kmalloc(50 + 2 * (ifmgd->assocreq_ies_len + | 
|  | ifmgd->assocresp_ies_len), GFP_KERNEL); | 
|  | if (!buf) | 
|  | return; | 
|  |  | 
|  | len = sprintf(buf, "ASSOCINFO("); | 
|  | if (ifmgd->assocreq_ies) { | 
|  | len += sprintf(buf + len, "ReqIEs="); | 
|  | for (i = 0; i < ifmgd->assocreq_ies_len; i++) { | 
|  | len += sprintf(buf + len, "%02x", | 
|  | ifmgd->assocreq_ies[i]); | 
|  | } | 
|  | } | 
|  | if (ifmgd->assocresp_ies) { | 
|  | if (ifmgd->assocreq_ies) | 
|  | len += sprintf(buf + len, " "); | 
|  | len += sprintf(buf + len, "RespIEs="); | 
|  | for (i = 0; i < ifmgd->assocresp_ies_len; i++) { | 
|  | len += sprintf(buf + len, "%02x", | 
|  | ifmgd->assocresp_ies[i]); | 
|  | } | 
|  | } | 
|  | len += sprintf(buf + len, ")"); | 
|  |  | 
|  | if (len > IW_CUSTOM_MAX) { | 
|  | len = sprintf(buf, "ASSOCRESPIE="); | 
|  | for (i = 0; i < ifmgd->assocresp_ies_len; i++) { | 
|  | len += sprintf(buf + len, "%02x", | 
|  | ifmgd->assocresp_ies[i]); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (len <= IW_CUSTOM_MAX) { | 
|  | memset(&wrqu, 0, sizeof(wrqu)); | 
|  | wrqu.data.length = len; | 
|  | wireless_send_event(sdata->dev, IWEVCUSTOM, &wrqu, buf); | 
|  | } | 
|  |  | 
|  | kfree(buf); | 
|  | } | 
|  |  | 
|  |  | 
|  | static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata, | 
|  | u32 bss_info_changed) | 
|  | { | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct ieee80211_conf *conf = &local_to_hw(local)->conf; | 
|  |  | 
|  | struct ieee80211_bss *bss; | 
|  |  | 
|  | bss_info_changed |= BSS_CHANGED_ASSOC; | 
|  | ifmgd->flags |= IEEE80211_STA_ASSOCIATED; | 
|  |  | 
|  | bss = ieee80211_rx_bss_get(local, ifmgd->bssid, | 
|  | conf->channel->center_freq, | 
|  | ifmgd->ssid, ifmgd->ssid_len); | 
|  | if (bss) { | 
|  | /* set timing information */ | 
|  | sdata->vif.bss_conf.beacon_int = bss->cbss.beacon_interval; | 
|  | sdata->vif.bss_conf.timestamp = bss->cbss.tsf; | 
|  | sdata->vif.bss_conf.dtim_period = bss->dtim_period; | 
|  |  | 
|  | bss_info_changed |= BSS_CHANGED_BEACON_INT; | 
|  | bss_info_changed |= ieee80211_handle_bss_capability(sdata, | 
|  | bss->cbss.capability, bss->has_erp_value, bss->erp_value); | 
|  |  | 
|  | cfg80211_hold_bss(&bss->cbss); | 
|  |  | 
|  | ieee80211_rx_bss_put(local, bss); | 
|  | } | 
|  |  | 
|  | ifmgd->flags |= IEEE80211_STA_PREV_BSSID_SET; | 
|  | memcpy(ifmgd->prev_bssid, sdata->u.mgd.bssid, ETH_ALEN); | 
|  | ieee80211_sta_send_associnfo(sdata); | 
|  |  | 
|  | ifmgd->last_probe = jiffies; | 
|  | ieee80211_led_assoc(local, 1); | 
|  |  | 
|  | sdata->vif.bss_conf.assoc = 1; | 
|  | /* | 
|  | * For now just always ask the driver to update the basic rateset | 
|  | * when we have associated, we aren't checking whether it actually | 
|  | * changed or not. | 
|  | */ | 
|  | bss_info_changed |= BSS_CHANGED_BASIC_RATES; | 
|  |  | 
|  | /* And the BSSID changed - we're associated now */ | 
|  | bss_info_changed |= BSS_CHANGED_BSSID; | 
|  |  | 
|  | ieee80211_bss_info_change_notify(sdata, bss_info_changed); | 
|  |  | 
|  | /* will be same as sdata */ | 
|  | if (local->ps_sdata) { | 
|  | mutex_lock(&local->iflist_mtx); | 
|  | ieee80211_recalc_ps(local, -1); | 
|  | mutex_unlock(&local->iflist_mtx); | 
|  | } | 
|  |  | 
|  | netif_tx_start_all_queues(sdata->dev); | 
|  | netif_carrier_on(sdata->dev); | 
|  |  | 
|  | ieee80211_sta_send_apinfo(sdata); | 
|  | } | 
|  |  | 
|  | static void ieee80211_direct_probe(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  | struct ieee80211_local *local = sdata->local; | 
|  |  | 
|  | ifmgd->direct_probe_tries++; | 
|  | if (ifmgd->direct_probe_tries > IEEE80211_AUTH_MAX_TRIES) { | 
|  | printk(KERN_DEBUG "%s: direct probe to AP %pM timed out\n", | 
|  | sdata->dev->name, ifmgd->bssid); | 
|  | ifmgd->state = IEEE80211_STA_MLME_DISABLED; | 
|  | ieee80211_recalc_idle(local); | 
|  | cfg80211_send_auth_timeout(sdata->dev, ifmgd->bssid); | 
|  |  | 
|  | /* | 
|  | * Most likely AP is not in the range so remove the | 
|  | * bss information associated to the AP | 
|  | */ | 
|  | ieee80211_rx_bss_remove(sdata, ifmgd->bssid, | 
|  | sdata->local->hw.conf.channel->center_freq, | 
|  | ifmgd->ssid, ifmgd->ssid_len); | 
|  |  | 
|  | /* | 
|  | * We might have a pending scan which had no chance to run yet | 
|  | * due to state == IEEE80211_STA_MLME_DIRECT_PROBE. | 
|  | * Hence, queue the STAs work again | 
|  | */ | 
|  | queue_work(local->hw.workqueue, &ifmgd->work); | 
|  | return; | 
|  | } | 
|  |  | 
|  | printk(KERN_DEBUG "%s: direct probe to AP %pM try %d\n", | 
|  | sdata->dev->name, ifmgd->bssid, | 
|  | ifmgd->direct_probe_tries); | 
|  |  | 
|  | ifmgd->state = IEEE80211_STA_MLME_DIRECT_PROBE; | 
|  |  | 
|  | /* Direct probe is sent to broadcast address as some APs | 
|  | * will not answer to direct packet in unassociated state. | 
|  | */ | 
|  | ieee80211_send_probe_req(sdata, NULL, | 
|  | ifmgd->ssid, ifmgd->ssid_len, NULL, 0); | 
|  |  | 
|  | mod_timer(&ifmgd->timer, jiffies + IEEE80211_AUTH_TIMEOUT); | 
|  | } | 
|  |  | 
|  |  | 
|  | static void ieee80211_authenticate(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | u8 *ies; | 
|  | size_t ies_len; | 
|  |  | 
|  | ifmgd->auth_tries++; | 
|  | if (ifmgd->auth_tries > IEEE80211_AUTH_MAX_TRIES) { | 
|  | printk(KERN_DEBUG "%s: authentication with AP %pM" | 
|  | " timed out\n", | 
|  | sdata->dev->name, ifmgd->bssid); | 
|  | ifmgd->state = IEEE80211_STA_MLME_DISABLED; | 
|  | ieee80211_recalc_idle(local); | 
|  | cfg80211_send_auth_timeout(sdata->dev, ifmgd->bssid); | 
|  | ieee80211_rx_bss_remove(sdata, ifmgd->bssid, | 
|  | sdata->local->hw.conf.channel->center_freq, | 
|  | ifmgd->ssid, ifmgd->ssid_len); | 
|  |  | 
|  | /* | 
|  | * We might have a pending scan which had no chance to run yet | 
|  | * due to state == IEEE80211_STA_MLME_AUTHENTICATE. | 
|  | * Hence, queue the STAs work again | 
|  | */ | 
|  | queue_work(local->hw.workqueue, &ifmgd->work); | 
|  | return; | 
|  | } | 
|  |  | 
|  | ifmgd->state = IEEE80211_STA_MLME_AUTHENTICATE; | 
|  | printk(KERN_DEBUG "%s: authenticate with AP %pM\n", | 
|  | sdata->dev->name, ifmgd->bssid); | 
|  |  | 
|  | if (ifmgd->flags & IEEE80211_STA_EXT_SME) { | 
|  | ies = ifmgd->sme_auth_ie; | 
|  | ies_len = ifmgd->sme_auth_ie_len; | 
|  | } else { | 
|  | ies = NULL; | 
|  | ies_len = 0; | 
|  | } | 
|  | ieee80211_send_auth(sdata, 1, ifmgd->auth_alg, ies, ies_len, | 
|  | ifmgd->bssid, 0); | 
|  | ifmgd->auth_transaction = 2; | 
|  |  | 
|  | mod_timer(&ifmgd->timer, jiffies + IEEE80211_AUTH_TIMEOUT); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * The disassoc 'reason' argument can be either our own reason | 
|  | * if self disconnected or a reason code from the AP. | 
|  | */ | 
|  | static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata, | 
|  | bool deauth, bool self_disconnected, | 
|  | u16 reason) | 
|  | { | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct ieee80211_conf *conf = &local_to_hw(local)->conf; | 
|  | struct ieee80211_bss *bss; | 
|  | struct sta_info *sta; | 
|  | u32 changed = 0, config_changed = 0; | 
|  |  | 
|  | if (deauth) { | 
|  | ifmgd->direct_probe_tries = 0; | 
|  | ifmgd->auth_tries = 0; | 
|  | } | 
|  | ifmgd->assoc_scan_tries = 0; | 
|  | ifmgd->assoc_tries = 0; | 
|  |  | 
|  | netif_tx_stop_all_queues(sdata->dev); | 
|  | netif_carrier_off(sdata->dev); | 
|  |  | 
|  | rcu_read_lock(); | 
|  | sta = sta_info_get(local, ifmgd->bssid); | 
|  | if (sta) | 
|  | ieee80211_sta_tear_down_BA_sessions(sta); | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | bss = ieee80211_rx_bss_get(local, ifmgd->bssid, | 
|  | conf->channel->center_freq, | 
|  | ifmgd->ssid, ifmgd->ssid_len); | 
|  |  | 
|  | if (bss) { | 
|  | cfg80211_unhold_bss(&bss->cbss); | 
|  | ieee80211_rx_bss_put(local, bss); | 
|  | } | 
|  |  | 
|  | if (self_disconnected) { | 
|  | if (deauth) | 
|  | ieee80211_send_deauth_disassoc(sdata, | 
|  | IEEE80211_STYPE_DEAUTH, reason); | 
|  | else | 
|  | ieee80211_send_deauth_disassoc(sdata, | 
|  | IEEE80211_STYPE_DISASSOC, reason); | 
|  | } | 
|  |  | 
|  | ifmgd->flags &= ~IEEE80211_STA_ASSOCIATED; | 
|  | changed |= ieee80211_reset_erp_info(sdata); | 
|  |  | 
|  | ieee80211_led_assoc(local, 0); | 
|  | changed |= BSS_CHANGED_ASSOC; | 
|  | sdata->vif.bss_conf.assoc = false; | 
|  |  | 
|  | ieee80211_sta_send_apinfo(sdata); | 
|  |  | 
|  | if (self_disconnected || reason == WLAN_REASON_DISASSOC_STA_HAS_LEFT) { | 
|  | ifmgd->state = IEEE80211_STA_MLME_DISABLED; | 
|  | ieee80211_rx_bss_remove(sdata, ifmgd->bssid, | 
|  | sdata->local->hw.conf.channel->center_freq, | 
|  | ifmgd->ssid, ifmgd->ssid_len); | 
|  | } | 
|  |  | 
|  | ieee80211_set_wmm_default(sdata); | 
|  |  | 
|  | ieee80211_recalc_idle(local); | 
|  |  | 
|  | /* channel(_type) changes are handled by ieee80211_hw_config */ | 
|  | local->oper_channel_type = NL80211_CHAN_NO_HT; | 
|  |  | 
|  | /* on the next assoc, re-program HT parameters */ | 
|  | sdata->ht_opmode_valid = false; | 
|  |  | 
|  | local->power_constr_level = 0; | 
|  |  | 
|  | del_timer_sync(&local->dynamic_ps_timer); | 
|  | cancel_work_sync(&local->dynamic_ps_enable_work); | 
|  |  | 
|  | if (local->hw.conf.flags & IEEE80211_CONF_PS) { | 
|  | local->hw.conf.flags &= ~IEEE80211_CONF_PS; | 
|  | config_changed |= IEEE80211_CONF_CHANGE_PS; | 
|  | } | 
|  |  | 
|  | ieee80211_hw_config(local, config_changed); | 
|  |  | 
|  | /* And the BSSID changed -- not very interesting here */ | 
|  | changed |= BSS_CHANGED_BSSID; | 
|  | ieee80211_bss_info_change_notify(sdata, changed); | 
|  |  | 
|  | rcu_read_lock(); | 
|  |  | 
|  | sta = sta_info_get(local, ifmgd->bssid); | 
|  | if (!sta) { | 
|  | rcu_read_unlock(); | 
|  | return; | 
|  | } | 
|  |  | 
|  | sta_info_unlink(&sta); | 
|  |  | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | sta_info_destroy(sta); | 
|  | } | 
|  |  | 
|  | static int ieee80211_sta_wep_configured(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | if (!sdata || !sdata->default_key || | 
|  | sdata->default_key->conf.alg != ALG_WEP) | 
|  | return 0; | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static int ieee80211_privacy_mismatch(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct ieee80211_bss *bss; | 
|  | int bss_privacy; | 
|  | int wep_privacy; | 
|  | int privacy_invoked; | 
|  |  | 
|  | if (!ifmgd || (ifmgd->flags & IEEE80211_STA_EXT_SME)) | 
|  | return 0; | 
|  |  | 
|  | bss = ieee80211_rx_bss_get(local, ifmgd->bssid, | 
|  | local->hw.conf.channel->center_freq, | 
|  | ifmgd->ssid, ifmgd->ssid_len); | 
|  | if (!bss) | 
|  | return 0; | 
|  |  | 
|  | bss_privacy = !!(bss->cbss.capability & WLAN_CAPABILITY_PRIVACY); | 
|  | wep_privacy = !!ieee80211_sta_wep_configured(sdata); | 
|  | privacy_invoked = !!(ifmgd->flags & IEEE80211_STA_PRIVACY_INVOKED); | 
|  |  | 
|  | ieee80211_rx_bss_put(local, bss); | 
|  |  | 
|  | if ((bss_privacy == wep_privacy) || (bss_privacy == privacy_invoked)) | 
|  | return 0; | 
|  |  | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static void ieee80211_associate(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  | struct ieee80211_local *local = sdata->local; | 
|  |  | 
|  | ifmgd->assoc_tries++; | 
|  | if (ifmgd->assoc_tries > IEEE80211_ASSOC_MAX_TRIES) { | 
|  | printk(KERN_DEBUG "%s: association with AP %pM" | 
|  | " timed out\n", | 
|  | sdata->dev->name, ifmgd->bssid); | 
|  | ifmgd->state = IEEE80211_STA_MLME_DISABLED; | 
|  | ieee80211_recalc_idle(local); | 
|  | cfg80211_send_assoc_timeout(sdata->dev, ifmgd->bssid); | 
|  | ieee80211_rx_bss_remove(sdata, ifmgd->bssid, | 
|  | sdata->local->hw.conf.channel->center_freq, | 
|  | ifmgd->ssid, ifmgd->ssid_len); | 
|  | /* | 
|  | * We might have a pending scan which had no chance to run yet | 
|  | * due to state == IEEE80211_STA_MLME_ASSOCIATE. | 
|  | * Hence, queue the STAs work again | 
|  | */ | 
|  | queue_work(local->hw.workqueue, &ifmgd->work); | 
|  | return; | 
|  | } | 
|  |  | 
|  | ifmgd->state = IEEE80211_STA_MLME_ASSOCIATE; | 
|  | printk(KERN_DEBUG "%s: associate with AP %pM\n", | 
|  | sdata->dev->name, ifmgd->bssid); | 
|  | if (ieee80211_privacy_mismatch(sdata)) { | 
|  | printk(KERN_DEBUG "%s: mismatch in privacy configuration and " | 
|  | "mixed-cell disabled - abort association\n", sdata->dev->name); | 
|  | ifmgd->state = IEEE80211_STA_MLME_DISABLED; | 
|  | ieee80211_recalc_idle(local); | 
|  | return; | 
|  | } | 
|  |  | 
|  | ieee80211_send_assoc(sdata); | 
|  |  | 
|  | mod_timer(&ifmgd->timer, jiffies + IEEE80211_ASSOC_TIMEOUT); | 
|  | } | 
|  |  | 
|  | void ieee80211_sta_rx_notify(struct ieee80211_sub_if_data *sdata, | 
|  | struct ieee80211_hdr *hdr) | 
|  | { | 
|  | /* | 
|  | * We can postpone the mgd.timer whenever receiving unicast frames | 
|  | * from AP because we know that the connection is working both ways | 
|  | * at that time. But multicast frames (and hence also beacons) must | 
|  | * be ignored here, because we need to trigger the timer during | 
|  | * data idle periods for sending the periodical probe request to | 
|  | * the AP. | 
|  | */ | 
|  | if (!is_multicast_ether_addr(hdr->addr1)) | 
|  | mod_timer(&sdata->u.mgd.timer, | 
|  | jiffies + IEEE80211_MONITORING_INTERVAL); | 
|  | } | 
|  |  | 
|  | void ieee80211_beacon_loss_work(struct work_struct *work) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = | 
|  | container_of(work, struct ieee80211_sub_if_data, | 
|  | u.mgd.beacon_loss_work); | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  |  | 
|  | /* | 
|  | * The driver has already reported this event and we have | 
|  | * already sent a probe request. Maybe the AP died and the | 
|  | * driver keeps reporting until we disassociate... We have | 
|  | * to ignore that because otherwise we would continually | 
|  | * reset the timer and never check whether we received a | 
|  | * probe response! | 
|  | */ | 
|  | if (ifmgd->flags & IEEE80211_STA_PROBEREQ_POLL) | 
|  | return; | 
|  |  | 
|  | #ifdef CONFIG_MAC80211_VERBOSE_DEBUG | 
|  | if (net_ratelimit()) { | 
|  | printk(KERN_DEBUG "%s: driver reports beacon loss from AP %pM " | 
|  | "- sending probe request\n", sdata->dev->name, | 
|  | sdata->u.mgd.bssid); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | ifmgd->flags |= IEEE80211_STA_PROBEREQ_POLL; | 
|  |  | 
|  | mutex_lock(&sdata->local->iflist_mtx); | 
|  | ieee80211_recalc_ps(sdata->local, -1); | 
|  | mutex_unlock(&sdata->local->iflist_mtx); | 
|  |  | 
|  | ieee80211_send_probe_req(sdata, ifmgd->bssid, ifmgd->ssid, | 
|  | ifmgd->ssid_len, NULL, 0); | 
|  |  | 
|  | mod_timer(&ifmgd->timer, jiffies + IEEE80211_PROBE_WAIT); | 
|  | } | 
|  |  | 
|  | void ieee80211_beacon_loss(struct ieee80211_vif *vif) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); | 
|  |  | 
|  | queue_work(sdata->local->hw.workqueue, | 
|  | &sdata->u.mgd.beacon_loss_work); | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_beacon_loss); | 
|  |  | 
|  | static void ieee80211_associated(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct sta_info *sta; | 
|  | unsigned long last_rx; | 
|  | bool disassoc = false; | 
|  |  | 
|  | /* TODO: start monitoring current AP signal quality and number of | 
|  | * missed beacons. Scan other channels every now and then and search | 
|  | * for better APs. */ | 
|  | /* TODO: remove expired BSSes */ | 
|  |  | 
|  | ifmgd->state = IEEE80211_STA_MLME_ASSOCIATED; | 
|  |  | 
|  | rcu_read_lock(); | 
|  |  | 
|  | sta = sta_info_get(local, ifmgd->bssid); | 
|  | if (!sta) { | 
|  | printk(KERN_DEBUG "%s: No STA entry for own AP %pM\n", | 
|  | sdata->dev->name, ifmgd->bssid); | 
|  | disassoc = true; | 
|  | rcu_read_unlock(); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | last_rx = sta->last_rx; | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | if ((ifmgd->flags & IEEE80211_STA_PROBEREQ_POLL) && | 
|  | time_after(jiffies, last_rx + IEEE80211_PROBE_WAIT)) { | 
|  | printk(KERN_DEBUG "%s: no probe response from AP %pM " | 
|  | "- disassociating\n", | 
|  | sdata->dev->name, ifmgd->bssid); | 
|  | disassoc = true; | 
|  | ifmgd->flags &= ~IEEE80211_STA_PROBEREQ_POLL; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Beacon filtering is only enabled with power save and then the | 
|  | * stack should not check for beacon loss. | 
|  | */ | 
|  | if (!((local->hw.flags & IEEE80211_HW_BEACON_FILTER) && | 
|  | (local->hw.conf.flags & IEEE80211_CONF_PS)) && | 
|  | time_after(jiffies, | 
|  | ifmgd->last_beacon + IEEE80211_MONITORING_INTERVAL)) { | 
|  | #ifdef CONFIG_MAC80211_VERBOSE_DEBUG | 
|  | if (net_ratelimit()) { | 
|  | printk(KERN_DEBUG "%s: beacon loss from AP %pM " | 
|  | "- sending probe request\n", | 
|  | sdata->dev->name, ifmgd->bssid); | 
|  | } | 
|  | #endif | 
|  | ifmgd->flags |= IEEE80211_STA_PROBEREQ_POLL; | 
|  | mutex_lock(&local->iflist_mtx); | 
|  | ieee80211_recalc_ps(local, -1); | 
|  | mutex_unlock(&local->iflist_mtx); | 
|  | ieee80211_send_probe_req(sdata, ifmgd->bssid, ifmgd->ssid, | 
|  | ifmgd->ssid_len, NULL, 0); | 
|  | mod_timer(&ifmgd->timer, jiffies + IEEE80211_PROBE_WAIT); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (time_after(jiffies, last_rx + IEEE80211_PROBE_IDLE_TIME)) { | 
|  | ifmgd->flags |= IEEE80211_STA_PROBEREQ_POLL; | 
|  | mutex_lock(&local->iflist_mtx); | 
|  | ieee80211_recalc_ps(local, -1); | 
|  | mutex_unlock(&local->iflist_mtx); | 
|  | ieee80211_send_probe_req(sdata, ifmgd->bssid, ifmgd->ssid, | 
|  | ifmgd->ssid_len, NULL, 0); | 
|  | } | 
|  |  | 
|  | out: | 
|  | if (!disassoc) | 
|  | mod_timer(&ifmgd->timer, | 
|  | jiffies + IEEE80211_MONITORING_INTERVAL); | 
|  | else | 
|  | ieee80211_set_disassoc(sdata, true, true, | 
|  | WLAN_REASON_PREV_AUTH_NOT_VALID); | 
|  | } | 
|  |  | 
|  |  | 
|  | static void ieee80211_auth_completed(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  |  | 
|  | printk(KERN_DEBUG "%s: authenticated\n", sdata->dev->name); | 
|  | ifmgd->flags |= IEEE80211_STA_AUTHENTICATED; | 
|  | if (ifmgd->flags & IEEE80211_STA_EXT_SME) { | 
|  | /* Wait for SME to request association */ | 
|  | ifmgd->state = IEEE80211_STA_MLME_DISABLED; | 
|  | ieee80211_recalc_idle(sdata->local); | 
|  | } else | 
|  | ieee80211_associate(sdata); | 
|  | } | 
|  |  | 
|  |  | 
|  | static void ieee80211_auth_challenge(struct ieee80211_sub_if_data *sdata, | 
|  | struct ieee80211_mgmt *mgmt, | 
|  | size_t len) | 
|  | { | 
|  | u8 *pos; | 
|  | struct ieee802_11_elems elems; | 
|  |  | 
|  | pos = mgmt->u.auth.variable; | 
|  | ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), &elems); | 
|  | if (!elems.challenge) | 
|  | return; | 
|  | ieee80211_send_auth(sdata, 3, sdata->u.mgd.auth_alg, | 
|  | elems.challenge - 2, elems.challenge_len + 2, | 
|  | sdata->u.mgd.bssid, 1); | 
|  | sdata->u.mgd.auth_transaction = 4; | 
|  | } | 
|  |  | 
|  | static void ieee80211_rx_mgmt_auth(struct ieee80211_sub_if_data *sdata, | 
|  | struct ieee80211_mgmt *mgmt, | 
|  | size_t len) | 
|  | { | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  | u16 auth_alg, auth_transaction, status_code; | 
|  |  | 
|  | if (ifmgd->state != IEEE80211_STA_MLME_AUTHENTICATE) | 
|  | return; | 
|  |  | 
|  | if (len < 24 + 6) | 
|  | return; | 
|  |  | 
|  | if (memcmp(ifmgd->bssid, mgmt->sa, ETH_ALEN) != 0) | 
|  | return; | 
|  |  | 
|  | if (memcmp(ifmgd->bssid, mgmt->bssid, ETH_ALEN) != 0) | 
|  | return; | 
|  |  | 
|  | auth_alg = le16_to_cpu(mgmt->u.auth.auth_alg); | 
|  | auth_transaction = le16_to_cpu(mgmt->u.auth.auth_transaction); | 
|  | status_code = le16_to_cpu(mgmt->u.auth.status_code); | 
|  |  | 
|  | if (auth_alg != ifmgd->auth_alg || | 
|  | auth_transaction != ifmgd->auth_transaction) | 
|  | return; | 
|  |  | 
|  | if (status_code != WLAN_STATUS_SUCCESS) { | 
|  | if (status_code == WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG) { | 
|  | u8 algs[3]; | 
|  | const int num_algs = ARRAY_SIZE(algs); | 
|  | int i, pos; | 
|  | algs[0] = algs[1] = algs[2] = 0xff; | 
|  | if (ifmgd->auth_algs & IEEE80211_AUTH_ALG_OPEN) | 
|  | algs[0] = WLAN_AUTH_OPEN; | 
|  | if (ifmgd->auth_algs & IEEE80211_AUTH_ALG_SHARED_KEY) | 
|  | algs[1] = WLAN_AUTH_SHARED_KEY; | 
|  | if (ifmgd->auth_algs & IEEE80211_AUTH_ALG_LEAP) | 
|  | algs[2] = WLAN_AUTH_LEAP; | 
|  | if (ifmgd->auth_alg == WLAN_AUTH_OPEN) | 
|  | pos = 0; | 
|  | else if (ifmgd->auth_alg == WLAN_AUTH_SHARED_KEY) | 
|  | pos = 1; | 
|  | else | 
|  | pos = 2; | 
|  | for (i = 0; i < num_algs; i++) { | 
|  | pos++; | 
|  | if (pos >= num_algs) | 
|  | pos = 0; | 
|  | if (algs[pos] == ifmgd->auth_alg || | 
|  | algs[pos] == 0xff) | 
|  | continue; | 
|  | if (algs[pos] == WLAN_AUTH_SHARED_KEY && | 
|  | !ieee80211_sta_wep_configured(sdata)) | 
|  | continue; | 
|  | ifmgd->auth_alg = algs[pos]; | 
|  | break; | 
|  | } | 
|  | } | 
|  | return; | 
|  | } | 
|  |  | 
|  | switch (ifmgd->auth_alg) { | 
|  | case WLAN_AUTH_OPEN: | 
|  | case WLAN_AUTH_LEAP: | 
|  | case WLAN_AUTH_FT: | 
|  | ieee80211_auth_completed(sdata); | 
|  | cfg80211_send_rx_auth(sdata->dev, (u8 *) mgmt, len); | 
|  | break; | 
|  | case WLAN_AUTH_SHARED_KEY: | 
|  | if (ifmgd->auth_transaction == 4) { | 
|  | ieee80211_auth_completed(sdata); | 
|  | cfg80211_send_rx_auth(sdata->dev, (u8 *) mgmt, len); | 
|  | } else | 
|  | ieee80211_auth_challenge(sdata, mgmt, len); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  |  | 
|  | static void ieee80211_rx_mgmt_deauth(struct ieee80211_sub_if_data *sdata, | 
|  | struct ieee80211_mgmt *mgmt, | 
|  | size_t len) | 
|  | { | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  | u16 reason_code; | 
|  |  | 
|  | if (len < 24 + 2) | 
|  | return; | 
|  |  | 
|  | if (memcmp(ifmgd->bssid, mgmt->sa, ETH_ALEN)) | 
|  | return; | 
|  |  | 
|  | reason_code = le16_to_cpu(mgmt->u.deauth.reason_code); | 
|  |  | 
|  | if (ifmgd->flags & IEEE80211_STA_AUTHENTICATED) | 
|  | printk(KERN_DEBUG "%s: deauthenticated (Reason: %u)\n", | 
|  | sdata->dev->name, reason_code); | 
|  |  | 
|  | if (!(ifmgd->flags & IEEE80211_STA_EXT_SME) && | 
|  | (ifmgd->state == IEEE80211_STA_MLME_AUTHENTICATE || | 
|  | ifmgd->state == IEEE80211_STA_MLME_ASSOCIATE || | 
|  | ifmgd->state == IEEE80211_STA_MLME_ASSOCIATED)) { | 
|  | ifmgd->state = IEEE80211_STA_MLME_DIRECT_PROBE; | 
|  | mod_timer(&ifmgd->timer, jiffies + | 
|  | IEEE80211_RETRY_AUTH_INTERVAL); | 
|  | } | 
|  |  | 
|  | ieee80211_set_disassoc(sdata, true, false, 0); | 
|  | ifmgd->flags &= ~IEEE80211_STA_AUTHENTICATED; | 
|  | cfg80211_send_deauth(sdata->dev, (u8 *) mgmt, len); | 
|  | } | 
|  |  | 
|  |  | 
|  | static void ieee80211_rx_mgmt_disassoc(struct ieee80211_sub_if_data *sdata, | 
|  | struct ieee80211_mgmt *mgmt, | 
|  | size_t len) | 
|  | { | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  | u16 reason_code; | 
|  |  | 
|  | if (len < 24 + 2) | 
|  | return; | 
|  |  | 
|  | if (memcmp(ifmgd->bssid, mgmt->sa, ETH_ALEN)) | 
|  | return; | 
|  |  | 
|  | reason_code = le16_to_cpu(mgmt->u.disassoc.reason_code); | 
|  |  | 
|  | if (ifmgd->flags & IEEE80211_STA_ASSOCIATED) | 
|  | printk(KERN_DEBUG "%s: disassociated (Reason: %u)\n", | 
|  | sdata->dev->name, reason_code); | 
|  |  | 
|  | if (!(ifmgd->flags & IEEE80211_STA_EXT_SME) && | 
|  | ifmgd->state == IEEE80211_STA_MLME_ASSOCIATED) { | 
|  | ifmgd->state = IEEE80211_STA_MLME_ASSOCIATE; | 
|  | mod_timer(&ifmgd->timer, jiffies + | 
|  | IEEE80211_RETRY_AUTH_INTERVAL); | 
|  | } | 
|  |  | 
|  | ieee80211_set_disassoc(sdata, false, false, reason_code); | 
|  | cfg80211_send_disassoc(sdata->dev, (u8 *) mgmt, len); | 
|  | } | 
|  |  | 
|  |  | 
|  | static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata, | 
|  | struct ieee80211_mgmt *mgmt, | 
|  | size_t len, | 
|  | int reassoc) | 
|  | { | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct ieee80211_supported_band *sband; | 
|  | struct sta_info *sta; | 
|  | u32 rates, basic_rates; | 
|  | u16 capab_info, status_code, aid; | 
|  | struct ieee802_11_elems elems; | 
|  | struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf; | 
|  | u8 *pos; | 
|  | u32 changed = 0; | 
|  | int i, j; | 
|  | bool have_higher_than_11mbit = false, newsta = false; | 
|  | u16 ap_ht_cap_flags; | 
|  |  | 
|  | /* AssocResp and ReassocResp have identical structure, so process both | 
|  | * of them in this function. */ | 
|  |  | 
|  | if (ifmgd->state != IEEE80211_STA_MLME_ASSOCIATE) | 
|  | return; | 
|  |  | 
|  | if (len < 24 + 6) | 
|  | return; | 
|  |  | 
|  | if (memcmp(ifmgd->bssid, mgmt->sa, ETH_ALEN) != 0) | 
|  | return; | 
|  |  | 
|  | capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info); | 
|  | status_code = le16_to_cpu(mgmt->u.assoc_resp.status_code); | 
|  | aid = le16_to_cpu(mgmt->u.assoc_resp.aid); | 
|  |  | 
|  | printk(KERN_DEBUG "%s: RX %sssocResp from %pM (capab=0x%x " | 
|  | "status=%d aid=%d)\n", | 
|  | sdata->dev->name, reassoc ? "Rea" : "A", mgmt->sa, | 
|  | capab_info, status_code, (u16)(aid & ~(BIT(15) | BIT(14)))); | 
|  |  | 
|  | pos = mgmt->u.assoc_resp.variable; | 
|  | ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), &elems); | 
|  |  | 
|  | if (status_code == WLAN_STATUS_ASSOC_REJECTED_TEMPORARILY && | 
|  | elems.timeout_int && elems.timeout_int_len == 5 && | 
|  | elems.timeout_int[0] == WLAN_TIMEOUT_ASSOC_COMEBACK) { | 
|  | u32 tu, ms; | 
|  | tu = get_unaligned_le32(elems.timeout_int + 1); | 
|  | ms = tu * 1024 / 1000; | 
|  | printk(KERN_DEBUG "%s: AP rejected association temporarily; " | 
|  | "comeback duration %u TU (%u ms)\n", | 
|  | sdata->dev->name, tu, ms); | 
|  | if (ms > IEEE80211_ASSOC_TIMEOUT) | 
|  | mod_timer(&ifmgd->timer, | 
|  | jiffies + msecs_to_jiffies(ms)); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (status_code != WLAN_STATUS_SUCCESS) { | 
|  | printk(KERN_DEBUG "%s: AP denied association (code=%d)\n", | 
|  | sdata->dev->name, status_code); | 
|  | /* if this was a reassociation, ensure we try a "full" | 
|  | * association next time. This works around some broken APs | 
|  | * which do not correctly reject reassociation requests. */ | 
|  | ifmgd->flags &= ~IEEE80211_STA_PREV_BSSID_SET; | 
|  | cfg80211_send_rx_assoc(sdata->dev, (u8 *) mgmt, len); | 
|  | if (ifmgd->flags & IEEE80211_STA_EXT_SME) { | 
|  | /* Wait for SME to decide what to do next */ | 
|  | ifmgd->state = IEEE80211_STA_MLME_DISABLED; | 
|  | ieee80211_recalc_idle(local); | 
|  | } | 
|  | return; | 
|  | } | 
|  |  | 
|  | if ((aid & (BIT(15) | BIT(14))) != (BIT(15) | BIT(14))) | 
|  | printk(KERN_DEBUG "%s: invalid aid value %d; bits 15:14 not " | 
|  | "set\n", sdata->dev->name, aid); | 
|  | aid &= ~(BIT(15) | BIT(14)); | 
|  |  | 
|  | if (!elems.supp_rates) { | 
|  | printk(KERN_DEBUG "%s: no SuppRates element in AssocResp\n", | 
|  | sdata->dev->name); | 
|  | return; | 
|  | } | 
|  |  | 
|  | printk(KERN_DEBUG "%s: associated\n", sdata->dev->name); | 
|  | ifmgd->aid = aid; | 
|  | ifmgd->ap_capab = capab_info; | 
|  |  | 
|  | kfree(ifmgd->assocresp_ies); | 
|  | ifmgd->assocresp_ies_len = len - (pos - (u8 *) mgmt); | 
|  | ifmgd->assocresp_ies = kmalloc(ifmgd->assocresp_ies_len, GFP_KERNEL); | 
|  | if (ifmgd->assocresp_ies) | 
|  | memcpy(ifmgd->assocresp_ies, pos, ifmgd->assocresp_ies_len); | 
|  |  | 
|  | rcu_read_lock(); | 
|  |  | 
|  | /* Add STA entry for the AP */ | 
|  | sta = sta_info_get(local, ifmgd->bssid); | 
|  | if (!sta) { | 
|  | newsta = true; | 
|  |  | 
|  | sta = sta_info_alloc(sdata, ifmgd->bssid, GFP_ATOMIC); | 
|  | if (!sta) { | 
|  | printk(KERN_DEBUG "%s: failed to alloc STA entry for" | 
|  | " the AP\n", sdata->dev->name); | 
|  | rcu_read_unlock(); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* update new sta with its last rx activity */ | 
|  | sta->last_rx = jiffies; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * FIXME: Do we really need to update the sta_info's information here? | 
|  | *	  We already know about the AP (we found it in our list) so it | 
|  | *	  should already be filled with the right info, no? | 
|  | *	  As is stands, all this is racy because typically we assume | 
|  | *	  the information that is filled in here (except flags) doesn't | 
|  | *	  change while a STA structure is alive. As such, it should move | 
|  | *	  to between the sta_info_alloc() and sta_info_insert() above. | 
|  | */ | 
|  |  | 
|  | set_sta_flags(sta, WLAN_STA_AUTH | WLAN_STA_ASSOC | WLAN_STA_ASSOC_AP); | 
|  | if (!(ifmgd->flags & IEEE80211_STA_CONTROL_PORT)) | 
|  | set_sta_flags(sta, WLAN_STA_AUTHORIZED); | 
|  |  | 
|  | rates = 0; | 
|  | basic_rates = 0; | 
|  | sband = local->hw.wiphy->bands[local->hw.conf.channel->band]; | 
|  |  | 
|  | for (i = 0; i < elems.supp_rates_len; i++) { | 
|  | int rate = (elems.supp_rates[i] & 0x7f) * 5; | 
|  | bool is_basic = !!(elems.supp_rates[i] & 0x80); | 
|  |  | 
|  | if (rate > 110) | 
|  | have_higher_than_11mbit = true; | 
|  |  | 
|  | for (j = 0; j < sband->n_bitrates; j++) { | 
|  | if (sband->bitrates[j].bitrate == rate) { | 
|  | rates |= BIT(j); | 
|  | if (is_basic) | 
|  | basic_rates |= BIT(j); | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | for (i = 0; i < elems.ext_supp_rates_len; i++) { | 
|  | int rate = (elems.ext_supp_rates[i] & 0x7f) * 5; | 
|  | bool is_basic = !!(elems.ext_supp_rates[i] & 0x80); | 
|  |  | 
|  | if (rate > 110) | 
|  | have_higher_than_11mbit = true; | 
|  |  | 
|  | for (j = 0; j < sband->n_bitrates; j++) { | 
|  | if (sband->bitrates[j].bitrate == rate) { | 
|  | rates |= BIT(j); | 
|  | if (is_basic) | 
|  | basic_rates |= BIT(j); | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | sta->sta.supp_rates[local->hw.conf.channel->band] = rates; | 
|  | sdata->vif.bss_conf.basic_rates = basic_rates; | 
|  |  | 
|  | /* cf. IEEE 802.11 9.2.12 */ | 
|  | if (local->hw.conf.channel->band == IEEE80211_BAND_2GHZ && | 
|  | have_higher_than_11mbit) | 
|  | sdata->flags |= IEEE80211_SDATA_OPERATING_GMODE; | 
|  | else | 
|  | sdata->flags &= ~IEEE80211_SDATA_OPERATING_GMODE; | 
|  |  | 
|  | /* If TKIP/WEP is used, no need to parse AP's HT capabilities */ | 
|  | if (elems.ht_cap_elem && !(ifmgd->flags & IEEE80211_STA_TKIP_WEP_USED)) | 
|  | ieee80211_ht_cap_ie_to_sta_ht_cap(sband, | 
|  | elems.ht_cap_elem, &sta->sta.ht_cap); | 
|  |  | 
|  | ap_ht_cap_flags = sta->sta.ht_cap.cap; | 
|  |  | 
|  | rate_control_rate_init(sta); | 
|  |  | 
|  | if (ifmgd->flags & IEEE80211_STA_MFP_ENABLED) | 
|  | set_sta_flags(sta, WLAN_STA_MFP); | 
|  |  | 
|  | if (elems.wmm_param) | 
|  | set_sta_flags(sta, WLAN_STA_WME); | 
|  |  | 
|  | if (newsta) { | 
|  | int err = sta_info_insert(sta); | 
|  | if (err) { | 
|  | printk(KERN_DEBUG "%s: failed to insert STA entry for" | 
|  | " the AP (error %d)\n", sdata->dev->name, err); | 
|  | rcu_read_unlock(); | 
|  | return; | 
|  | } | 
|  | } | 
|  |  | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | if (elems.wmm_param) | 
|  | ieee80211_sta_wmm_params(local, ifmgd, elems.wmm_param, | 
|  | elems.wmm_param_len); | 
|  | else | 
|  | ieee80211_set_wmm_default(sdata); | 
|  |  | 
|  | if (elems.ht_info_elem && elems.wmm_param && | 
|  | (ifmgd->flags & IEEE80211_STA_WMM_ENABLED) && | 
|  | !(ifmgd->flags & IEEE80211_STA_TKIP_WEP_USED)) | 
|  | changed |= ieee80211_enable_ht(sdata, elems.ht_info_elem, | 
|  | ap_ht_cap_flags); | 
|  |  | 
|  | /* set AID and assoc capability, | 
|  | * ieee80211_set_associated() will tell the driver */ | 
|  | bss_conf->aid = aid; | 
|  | bss_conf->assoc_capability = capab_info; | 
|  | ieee80211_set_associated(sdata, changed); | 
|  |  | 
|  | /* | 
|  | * initialise the time of last beacon to be the association time, | 
|  | * otherwise beacon loss check will trigger immediately | 
|  | */ | 
|  | ifmgd->last_beacon = jiffies; | 
|  |  | 
|  | ieee80211_associated(sdata); | 
|  | cfg80211_send_rx_assoc(sdata->dev, (u8 *) mgmt, len); | 
|  | } | 
|  |  | 
|  |  | 
|  | static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata, | 
|  | struct ieee80211_mgmt *mgmt, | 
|  | size_t len, | 
|  | struct ieee80211_rx_status *rx_status, | 
|  | struct ieee802_11_elems *elems, | 
|  | bool beacon) | 
|  | { | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | int freq; | 
|  | struct ieee80211_bss *bss; | 
|  | struct ieee80211_channel *channel; | 
|  |  | 
|  | if (elems->ds_params && elems->ds_params_len == 1) | 
|  | freq = ieee80211_channel_to_frequency(elems->ds_params[0]); | 
|  | else | 
|  | freq = rx_status->freq; | 
|  |  | 
|  | channel = ieee80211_get_channel(local->hw.wiphy, freq); | 
|  |  | 
|  | if (!channel || channel->flags & IEEE80211_CHAN_DISABLED) | 
|  | return; | 
|  |  | 
|  | bss = ieee80211_bss_info_update(local, rx_status, mgmt, len, elems, | 
|  | channel, beacon); | 
|  | if (!bss) | 
|  | return; | 
|  |  | 
|  | if (elems->ch_switch_elem && (elems->ch_switch_elem_len == 3) && | 
|  | (memcmp(mgmt->bssid, sdata->u.mgd.bssid, ETH_ALEN) == 0)) { | 
|  | struct ieee80211_channel_sw_ie *sw_elem = | 
|  | (struct ieee80211_channel_sw_ie *)elems->ch_switch_elem; | 
|  | ieee80211_sta_process_chanswitch(sdata, sw_elem, bss); | 
|  | } | 
|  |  | 
|  | ieee80211_rx_bss_put(local, bss); | 
|  | } | 
|  |  | 
|  |  | 
|  | static void ieee80211_rx_mgmt_probe_resp(struct ieee80211_sub_if_data *sdata, | 
|  | struct ieee80211_mgmt *mgmt, | 
|  | size_t len, | 
|  | struct ieee80211_rx_status *rx_status) | 
|  | { | 
|  | struct ieee80211_if_managed *ifmgd; | 
|  | size_t baselen; | 
|  | struct ieee802_11_elems elems; | 
|  |  | 
|  | ifmgd = &sdata->u.mgd; | 
|  |  | 
|  | if (memcmp(mgmt->da, sdata->dev->dev_addr, ETH_ALEN)) | 
|  | return; /* ignore ProbeResp to foreign address */ | 
|  |  | 
|  | baselen = (u8 *) mgmt->u.probe_resp.variable - (u8 *) mgmt; | 
|  | if (baselen > len) | 
|  | return; | 
|  |  | 
|  | ieee802_11_parse_elems(mgmt->u.probe_resp.variable, len - baselen, | 
|  | &elems); | 
|  |  | 
|  | ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems, false); | 
|  |  | 
|  | /* direct probe may be part of the association flow */ | 
|  | if (ifmgd->state == IEEE80211_STA_MLME_DIRECT_PROBE) { | 
|  | printk(KERN_DEBUG "%s direct probe responded\n", | 
|  | sdata->dev->name); | 
|  | ieee80211_authenticate(sdata); | 
|  | } | 
|  |  | 
|  | if (ifmgd->flags & IEEE80211_STA_PROBEREQ_POLL) { | 
|  | ifmgd->flags &= ~IEEE80211_STA_PROBEREQ_POLL; | 
|  | mutex_lock(&sdata->local->iflist_mtx); | 
|  | ieee80211_recalc_ps(sdata->local, -1); | 
|  | mutex_unlock(&sdata->local->iflist_mtx); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This is the canonical list of information elements we care about, | 
|  | * the filter code also gives us all changes to the Microsoft OUI | 
|  | * (00:50:F2) vendor IE which is used for WMM which we need to track. | 
|  | * | 
|  | * We implement beacon filtering in software since that means we can | 
|  | * avoid processing the frame here and in cfg80211, and userspace | 
|  | * will not be able to tell whether the hardware supports it or not. | 
|  | * | 
|  | * XXX: This list needs to be dynamic -- userspace needs to be able to | 
|  | *	add items it requires. It also needs to be able to tell us to | 
|  | *	look out for other vendor IEs. | 
|  | */ | 
|  | static const u64 care_about_ies = | 
|  | (1ULL << WLAN_EID_COUNTRY) | | 
|  | (1ULL << WLAN_EID_ERP_INFO) | | 
|  | (1ULL << WLAN_EID_CHANNEL_SWITCH) | | 
|  | (1ULL << WLAN_EID_PWR_CONSTRAINT) | | 
|  | (1ULL << WLAN_EID_HT_CAPABILITY) | | 
|  | (1ULL << WLAN_EID_HT_INFORMATION); | 
|  |  | 
|  | static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, | 
|  | struct ieee80211_mgmt *mgmt, | 
|  | size_t len, | 
|  | struct ieee80211_rx_status *rx_status) | 
|  | { | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  | size_t baselen; | 
|  | struct ieee802_11_elems elems; | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | u32 changed = 0; | 
|  | bool erp_valid, directed_tim = false; | 
|  | u8 erp_value = 0; | 
|  | u32 ncrc; | 
|  |  | 
|  | /* Process beacon from the current BSS */ | 
|  | baselen = (u8 *) mgmt->u.beacon.variable - (u8 *) mgmt; | 
|  | if (baselen > len) | 
|  | return; | 
|  |  | 
|  | if (rx_status->freq != local->hw.conf.channel->center_freq) | 
|  | return; | 
|  |  | 
|  | if (!(ifmgd->flags & IEEE80211_STA_ASSOCIATED) || | 
|  | memcmp(ifmgd->bssid, mgmt->bssid, ETH_ALEN) != 0) | 
|  | return; | 
|  |  | 
|  | if (ifmgd->flags & IEEE80211_STA_PROBEREQ_POLL) { | 
|  | #ifdef CONFIG_MAC80211_VERBOSE_DEBUG | 
|  | if (net_ratelimit()) { | 
|  | printk(KERN_DEBUG "%s: cancelling probereq poll due " | 
|  | "to a received beacon\n", sdata->dev->name); | 
|  | } | 
|  | #endif | 
|  | ifmgd->flags &= ~IEEE80211_STA_PROBEREQ_POLL; | 
|  | mutex_lock(&local->iflist_mtx); | 
|  | ieee80211_recalc_ps(local, -1); | 
|  | mutex_unlock(&local->iflist_mtx); | 
|  | } | 
|  |  | 
|  | ncrc = crc32_be(0, (void *)&mgmt->u.beacon.beacon_int, 4); | 
|  | ncrc = ieee802_11_parse_elems_crc(mgmt->u.beacon.variable, | 
|  | len - baselen, &elems, | 
|  | care_about_ies, ncrc); | 
|  |  | 
|  | if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK) | 
|  | directed_tim = ieee80211_check_tim(elems.tim, elems.tim_len, | 
|  | ifmgd->aid); | 
|  |  | 
|  | if (ncrc != ifmgd->beacon_crc) { | 
|  | ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems, | 
|  | true); | 
|  |  | 
|  | ieee80211_sta_wmm_params(local, ifmgd, elems.wmm_param, | 
|  | elems.wmm_param_len); | 
|  | } | 
|  |  | 
|  | if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK) { | 
|  | if (directed_tim) { | 
|  | if (local->hw.conf.dynamic_ps_timeout > 0) { | 
|  | local->hw.conf.flags &= ~IEEE80211_CONF_PS; | 
|  | ieee80211_hw_config(local, | 
|  | IEEE80211_CONF_CHANGE_PS); | 
|  | ieee80211_send_nullfunc(local, sdata, 0); | 
|  | } else { | 
|  | local->pspolling = true; | 
|  |  | 
|  | /* | 
|  | * Here is assumed that the driver will be | 
|  | * able to send ps-poll frame and receive a | 
|  | * response even though power save mode is | 
|  | * enabled, but some drivers might require | 
|  | * to disable power save here. This needs | 
|  | * to be investigated. | 
|  | */ | 
|  | ieee80211_send_pspoll(local, sdata); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | if (ncrc == ifmgd->beacon_crc) | 
|  | return; | 
|  | ifmgd->beacon_crc = ncrc; | 
|  |  | 
|  | if (elems.erp_info && elems.erp_info_len >= 1) { | 
|  | erp_valid = true; | 
|  | erp_value = elems.erp_info[0]; | 
|  | } else { | 
|  | erp_valid = false; | 
|  | } | 
|  | changed |= ieee80211_handle_bss_capability(sdata, | 
|  | le16_to_cpu(mgmt->u.beacon.capab_info), | 
|  | erp_valid, erp_value); | 
|  |  | 
|  |  | 
|  | if (elems.ht_cap_elem && elems.ht_info_elem && elems.wmm_param && | 
|  | !(ifmgd->flags & IEEE80211_STA_TKIP_WEP_USED)) { | 
|  | struct sta_info *sta; | 
|  | struct ieee80211_supported_band *sband; | 
|  | u16 ap_ht_cap_flags; | 
|  |  | 
|  | rcu_read_lock(); | 
|  |  | 
|  | sta = sta_info_get(local, ifmgd->bssid); | 
|  | if (!sta) { | 
|  | rcu_read_unlock(); | 
|  | return; | 
|  | } | 
|  |  | 
|  | sband = local->hw.wiphy->bands[local->hw.conf.channel->band]; | 
|  |  | 
|  | ieee80211_ht_cap_ie_to_sta_ht_cap(sband, | 
|  | elems.ht_cap_elem, &sta->sta.ht_cap); | 
|  |  | 
|  | ap_ht_cap_flags = sta->sta.ht_cap.cap; | 
|  |  | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | changed |= ieee80211_enable_ht(sdata, elems.ht_info_elem, | 
|  | ap_ht_cap_flags); | 
|  | } | 
|  |  | 
|  | if (elems.country_elem) { | 
|  | /* Note we are only reviewing this on beacons | 
|  | * for the BSSID we are associated to */ | 
|  | regulatory_hint_11d(local->hw.wiphy, | 
|  | elems.country_elem, elems.country_elem_len); | 
|  |  | 
|  | /* TODO: IBSS also needs this */ | 
|  | if (elems.pwr_constr_elem) | 
|  | ieee80211_handle_pwr_constr(sdata, | 
|  | le16_to_cpu(mgmt->u.probe_resp.capab_info), | 
|  | elems.pwr_constr_elem, | 
|  | elems.pwr_constr_elem_len); | 
|  | } | 
|  |  | 
|  | ieee80211_bss_info_change_notify(sdata, changed); | 
|  | } | 
|  |  | 
|  | ieee80211_rx_result ieee80211_sta_rx_mgmt(struct ieee80211_sub_if_data *sdata, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct ieee80211_mgmt *mgmt; | 
|  | u16 fc; | 
|  |  | 
|  | if (skb->len < 24) | 
|  | return RX_DROP_MONITOR; | 
|  |  | 
|  | mgmt = (struct ieee80211_mgmt *) skb->data; | 
|  | fc = le16_to_cpu(mgmt->frame_control); | 
|  |  | 
|  | switch (fc & IEEE80211_FCTL_STYPE) { | 
|  | case IEEE80211_STYPE_PROBE_REQ: | 
|  | case IEEE80211_STYPE_PROBE_RESP: | 
|  | case IEEE80211_STYPE_BEACON: | 
|  | case IEEE80211_STYPE_AUTH: | 
|  | case IEEE80211_STYPE_ASSOC_RESP: | 
|  | case IEEE80211_STYPE_REASSOC_RESP: | 
|  | case IEEE80211_STYPE_DEAUTH: | 
|  | case IEEE80211_STYPE_DISASSOC: | 
|  | skb_queue_tail(&sdata->u.mgd.skb_queue, skb); | 
|  | queue_work(local->hw.workqueue, &sdata->u.mgd.work); | 
|  | return RX_QUEUED; | 
|  | } | 
|  |  | 
|  | return RX_DROP_MONITOR; | 
|  | } | 
|  |  | 
|  | static void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct ieee80211_rx_status *rx_status; | 
|  | struct ieee80211_mgmt *mgmt; | 
|  | u16 fc; | 
|  |  | 
|  | rx_status = (struct ieee80211_rx_status *) skb->cb; | 
|  | mgmt = (struct ieee80211_mgmt *) skb->data; | 
|  | fc = le16_to_cpu(mgmt->frame_control); | 
|  |  | 
|  | switch (fc & IEEE80211_FCTL_STYPE) { | 
|  | case IEEE80211_STYPE_PROBE_RESP: | 
|  | ieee80211_rx_mgmt_probe_resp(sdata, mgmt, skb->len, | 
|  | rx_status); | 
|  | break; | 
|  | case IEEE80211_STYPE_BEACON: | 
|  | ieee80211_rx_mgmt_beacon(sdata, mgmt, skb->len, | 
|  | rx_status); | 
|  | break; | 
|  | case IEEE80211_STYPE_AUTH: | 
|  | ieee80211_rx_mgmt_auth(sdata, mgmt, skb->len); | 
|  | break; | 
|  | case IEEE80211_STYPE_ASSOC_RESP: | 
|  | ieee80211_rx_mgmt_assoc_resp(sdata, mgmt, skb->len, 0); | 
|  | break; | 
|  | case IEEE80211_STYPE_REASSOC_RESP: | 
|  | ieee80211_rx_mgmt_assoc_resp(sdata, mgmt, skb->len, 1); | 
|  | break; | 
|  | case IEEE80211_STYPE_DEAUTH: | 
|  | ieee80211_rx_mgmt_deauth(sdata, mgmt, skb->len); | 
|  | break; | 
|  | case IEEE80211_STYPE_DISASSOC: | 
|  | ieee80211_rx_mgmt_disassoc(sdata, mgmt, skb->len); | 
|  | break; | 
|  | } | 
|  |  | 
|  | kfree_skb(skb); | 
|  | } | 
|  |  | 
|  | static void ieee80211_sta_timer(unsigned long data) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = | 
|  | (struct ieee80211_sub_if_data *) data; | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  | struct ieee80211_local *local = sdata->local; | 
|  |  | 
|  | if (local->quiescing) { | 
|  | set_bit(TMR_RUNNING_TIMER, &ifmgd->timers_running); | 
|  | return; | 
|  | } | 
|  |  | 
|  | set_bit(IEEE80211_STA_REQ_RUN, &ifmgd->request); | 
|  | queue_work(local->hw.workqueue, &ifmgd->work); | 
|  | } | 
|  |  | 
|  | static void ieee80211_sta_reset_auth(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  | struct ieee80211_local *local = sdata->local; | 
|  |  | 
|  | /* Reset own TSF to allow time synchronization work. */ | 
|  | drv_reset_tsf(local); | 
|  |  | 
|  | ifmgd->wmm_last_param_set = -1; /* allow any WMM update */ | 
|  |  | 
|  |  | 
|  | if (ifmgd->auth_algs & IEEE80211_AUTH_ALG_OPEN) | 
|  | ifmgd->auth_alg = WLAN_AUTH_OPEN; | 
|  | else if (ifmgd->auth_algs & IEEE80211_AUTH_ALG_SHARED_KEY) | 
|  | ifmgd->auth_alg = WLAN_AUTH_SHARED_KEY; | 
|  | else if (ifmgd->auth_algs & IEEE80211_AUTH_ALG_LEAP) | 
|  | ifmgd->auth_alg = WLAN_AUTH_LEAP; | 
|  | else if (ifmgd->auth_algs & IEEE80211_AUTH_ALG_FT) | 
|  | ifmgd->auth_alg = WLAN_AUTH_FT; | 
|  | else | 
|  | ifmgd->auth_alg = WLAN_AUTH_OPEN; | 
|  | ifmgd->auth_transaction = -1; | 
|  | ifmgd->flags &= ~IEEE80211_STA_ASSOCIATED; | 
|  | ifmgd->assoc_scan_tries = 0; | 
|  | ifmgd->direct_probe_tries = 0; | 
|  | ifmgd->auth_tries = 0; | 
|  | ifmgd->assoc_tries = 0; | 
|  | netif_tx_stop_all_queues(sdata->dev); | 
|  | netif_carrier_off(sdata->dev); | 
|  | } | 
|  |  | 
|  | static int ieee80211_sta_config_auth(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct ieee80211_bss *bss; | 
|  | u8 *bssid = ifmgd->bssid, *ssid = ifmgd->ssid; | 
|  | u8 ssid_len = ifmgd->ssid_len; | 
|  | u16 capa_mask = WLAN_CAPABILITY_ESS; | 
|  | u16 capa_val = WLAN_CAPABILITY_ESS; | 
|  | struct ieee80211_channel *chan = local->oper_channel; | 
|  |  | 
|  | if (!(ifmgd->flags & IEEE80211_STA_EXT_SME) && | 
|  | ifmgd->flags & (IEEE80211_STA_AUTO_SSID_SEL | | 
|  | IEEE80211_STA_AUTO_BSSID_SEL | | 
|  | IEEE80211_STA_AUTO_CHANNEL_SEL)) { | 
|  | capa_mask |= WLAN_CAPABILITY_PRIVACY; | 
|  | if (sdata->default_key) | 
|  | capa_val |= WLAN_CAPABILITY_PRIVACY; | 
|  | } | 
|  |  | 
|  | if (ifmgd->flags & IEEE80211_STA_AUTO_CHANNEL_SEL) | 
|  | chan = NULL; | 
|  |  | 
|  | if (ifmgd->flags & IEEE80211_STA_AUTO_BSSID_SEL) | 
|  | bssid = NULL; | 
|  |  | 
|  | if (ifmgd->flags & IEEE80211_STA_AUTO_SSID_SEL) { | 
|  | ssid = NULL; | 
|  | ssid_len = 0; | 
|  | } | 
|  |  | 
|  | bss = (void *)cfg80211_get_bss(local->hw.wiphy, chan, | 
|  | bssid, ssid, ssid_len, | 
|  | capa_mask, capa_val); | 
|  |  | 
|  | if (bss) { | 
|  | local->oper_channel = bss->cbss.channel; | 
|  | local->oper_channel_type = NL80211_CHAN_NO_HT; | 
|  | ieee80211_hw_config(local, 0); | 
|  |  | 
|  | if (!(ifmgd->flags & IEEE80211_STA_SSID_SET)) | 
|  | ieee80211_sta_set_ssid(sdata, bss->ssid, | 
|  | bss->ssid_len); | 
|  | ieee80211_sta_set_bssid(sdata, bss->cbss.bssid); | 
|  | ieee80211_sta_def_wmm_params(sdata, bss->supp_rates_len, | 
|  | bss->supp_rates); | 
|  | if (sdata->u.mgd.mfp == IEEE80211_MFP_REQUIRED) | 
|  | sdata->u.mgd.flags |= IEEE80211_STA_MFP_ENABLED; | 
|  | else | 
|  | sdata->u.mgd.flags &= ~IEEE80211_STA_MFP_ENABLED; | 
|  |  | 
|  | /* Send out direct probe if no probe resp was received or | 
|  | * the one we have is outdated | 
|  | */ | 
|  | if (!bss->last_probe_resp || | 
|  | time_after(jiffies, bss->last_probe_resp | 
|  | + IEEE80211_SCAN_RESULT_EXPIRE)) | 
|  | ifmgd->state = IEEE80211_STA_MLME_DIRECT_PROBE; | 
|  | else | 
|  | ifmgd->state = IEEE80211_STA_MLME_AUTHENTICATE; | 
|  |  | 
|  | ieee80211_rx_bss_put(local, bss); | 
|  | ieee80211_sta_reset_auth(sdata); | 
|  | return 0; | 
|  | } else { | 
|  | if (ifmgd->assoc_scan_tries < IEEE80211_ASSOC_SCANS_MAX_TRIES) { | 
|  |  | 
|  | ifmgd->assoc_scan_tries++; | 
|  |  | 
|  | ieee80211_request_internal_scan(sdata, ifmgd->ssid, | 
|  | ssid_len); | 
|  |  | 
|  | ifmgd->state = IEEE80211_STA_MLME_AUTHENTICATE; | 
|  | set_bit(IEEE80211_STA_REQ_AUTH, &ifmgd->request); | 
|  | } else { | 
|  | ifmgd->assoc_scan_tries = 0; | 
|  | ifmgd->state = IEEE80211_STA_MLME_DISABLED; | 
|  | ieee80211_recalc_idle(local); | 
|  | } | 
|  | } | 
|  | return -1; | 
|  | } | 
|  |  | 
|  |  | 
|  | static void ieee80211_sta_work(struct work_struct *work) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = | 
|  | container_of(work, struct ieee80211_sub_if_data, u.mgd.work); | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct ieee80211_if_managed *ifmgd; | 
|  | struct sk_buff *skb; | 
|  |  | 
|  | if (!netif_running(sdata->dev)) | 
|  | return; | 
|  |  | 
|  | if (local->sw_scanning || local->hw_scanning) | 
|  | return; | 
|  |  | 
|  | if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION)) | 
|  | return; | 
|  |  | 
|  | /* | 
|  | * Nothing should have been stuffed into the workqueue during | 
|  | * the suspend->resume cycle. If this WARN is seen then there | 
|  | * is a bug with either the driver suspend or something in | 
|  | * mac80211 stuffing into the workqueue which we haven't yet | 
|  | * cleared during mac80211's suspend cycle. | 
|  | */ | 
|  | if (WARN_ON(local->suspended)) | 
|  | return; | 
|  |  | 
|  | ifmgd = &sdata->u.mgd; | 
|  |  | 
|  | while ((skb = skb_dequeue(&ifmgd->skb_queue))) | 
|  | ieee80211_sta_rx_queued_mgmt(sdata, skb); | 
|  |  | 
|  | if (ifmgd->state != IEEE80211_STA_MLME_DIRECT_PROBE && | 
|  | ifmgd->state != IEEE80211_STA_MLME_AUTHENTICATE && | 
|  | ifmgd->state != IEEE80211_STA_MLME_ASSOCIATE && | 
|  | test_and_clear_bit(IEEE80211_STA_REQ_SCAN, &ifmgd->request)) { | 
|  | queue_delayed_work(local->hw.workqueue, &local->scan_work, | 
|  | round_jiffies_relative(0)); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (test_and_clear_bit(IEEE80211_STA_REQ_AUTH, &ifmgd->request)) { | 
|  | if (ieee80211_sta_config_auth(sdata)) | 
|  | return; | 
|  | clear_bit(IEEE80211_STA_REQ_RUN, &ifmgd->request); | 
|  | } else if (!test_and_clear_bit(IEEE80211_STA_REQ_RUN, &ifmgd->request)) | 
|  | return; | 
|  |  | 
|  | ieee80211_recalc_idle(local); | 
|  |  | 
|  | switch (ifmgd->state) { | 
|  | case IEEE80211_STA_MLME_DISABLED: | 
|  | break; | 
|  | case IEEE80211_STA_MLME_DIRECT_PROBE: | 
|  | ieee80211_direct_probe(sdata); | 
|  | break; | 
|  | case IEEE80211_STA_MLME_AUTHENTICATE: | 
|  | ieee80211_authenticate(sdata); | 
|  | break; | 
|  | case IEEE80211_STA_MLME_ASSOCIATE: | 
|  | ieee80211_associate(sdata); | 
|  | break; | 
|  | case IEEE80211_STA_MLME_ASSOCIATED: | 
|  | ieee80211_associated(sdata); | 
|  | break; | 
|  | default: | 
|  | WARN_ON(1); | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (ieee80211_privacy_mismatch(sdata)) { | 
|  | printk(KERN_DEBUG "%s: privacy configuration mismatch and " | 
|  | "mixed-cell disabled - disassociate\n", sdata->dev->name); | 
|  |  | 
|  | ieee80211_set_disassoc(sdata, false, true, | 
|  | WLAN_REASON_UNSPECIFIED); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void ieee80211_restart_sta_timer(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | if (sdata->vif.type == NL80211_IFTYPE_STATION) { | 
|  | /* | 
|  | * Need to update last_beacon to avoid beacon loss | 
|  | * test to trigger. | 
|  | */ | 
|  | sdata->u.mgd.last_beacon = jiffies; | 
|  |  | 
|  |  | 
|  | queue_work(sdata->local->hw.workqueue, | 
|  | &sdata->u.mgd.work); | 
|  | } | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM | 
|  | void ieee80211_sta_quiesce(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  |  | 
|  | /* | 
|  | * we need to use atomic bitops for the running bits | 
|  | * only because both timers might fire at the same | 
|  | * time -- the code here is properly synchronised. | 
|  | */ | 
|  |  | 
|  | cancel_work_sync(&ifmgd->work); | 
|  | cancel_work_sync(&ifmgd->beacon_loss_work); | 
|  | if (del_timer_sync(&ifmgd->timer)) | 
|  | set_bit(TMR_RUNNING_TIMER, &ifmgd->timers_running); | 
|  |  | 
|  | cancel_work_sync(&ifmgd->chswitch_work); | 
|  | if (del_timer_sync(&ifmgd->chswitch_timer)) | 
|  | set_bit(TMR_RUNNING_CHANSW, &ifmgd->timers_running); | 
|  | } | 
|  |  | 
|  | void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  |  | 
|  | if (test_and_clear_bit(TMR_RUNNING_TIMER, &ifmgd->timers_running)) | 
|  | add_timer(&ifmgd->timer); | 
|  | if (test_and_clear_bit(TMR_RUNNING_CHANSW, &ifmgd->timers_running)) | 
|  | add_timer(&ifmgd->chswitch_timer); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /* interface setup */ | 
|  | void ieee80211_sta_setup_sdata(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_if_managed *ifmgd; | 
|  | u32 hw_flags; | 
|  |  | 
|  | ifmgd = &sdata->u.mgd; | 
|  | INIT_WORK(&ifmgd->work, ieee80211_sta_work); | 
|  | INIT_WORK(&ifmgd->chswitch_work, ieee80211_chswitch_work); | 
|  | INIT_WORK(&ifmgd->beacon_loss_work, ieee80211_beacon_loss_work); | 
|  | setup_timer(&ifmgd->timer, ieee80211_sta_timer, | 
|  | (unsigned long) sdata); | 
|  | setup_timer(&ifmgd->chswitch_timer, ieee80211_chswitch_timer, | 
|  | (unsigned long) sdata); | 
|  | skb_queue_head_init(&ifmgd->skb_queue); | 
|  |  | 
|  | ifmgd->capab = WLAN_CAPABILITY_ESS; | 
|  | ifmgd->auth_algs = IEEE80211_AUTH_ALG_OPEN | | 
|  | IEEE80211_AUTH_ALG_SHARED_KEY; | 
|  | ifmgd->flags |= IEEE80211_STA_CREATE_IBSS | | 
|  | IEEE80211_STA_AUTO_BSSID_SEL | | 
|  | IEEE80211_STA_AUTO_CHANNEL_SEL; | 
|  | if (sdata->local->hw.queues >= 4) | 
|  | ifmgd->flags |= IEEE80211_STA_WMM_ENABLED; | 
|  |  | 
|  | hw_flags = sdata->local->hw.flags; | 
|  |  | 
|  | if (hw_flags & IEEE80211_HW_SUPPORTS_PS) { | 
|  | ifmgd->powersave = CONFIG_MAC80211_DEFAULT_PS_VALUE; | 
|  | sdata->local->hw.conf.dynamic_ps_timeout = 500; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* configuration hooks */ | 
|  | void ieee80211_sta_req_auth(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  | struct ieee80211_local *local = sdata->local; | 
|  |  | 
|  | if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION)) | 
|  | return; | 
|  |  | 
|  | if ((ifmgd->flags & (IEEE80211_STA_BSSID_SET | | 
|  | IEEE80211_STA_AUTO_BSSID_SEL)) && | 
|  | (ifmgd->flags & (IEEE80211_STA_SSID_SET | | 
|  | IEEE80211_STA_AUTO_SSID_SEL))) { | 
|  |  | 
|  | if (ifmgd->state == IEEE80211_STA_MLME_ASSOCIATED) | 
|  | ieee80211_set_disassoc(sdata, true, true, | 
|  | WLAN_REASON_DEAUTH_LEAVING); | 
|  |  | 
|  | if (ifmgd->ssid_len == 0) { | 
|  | /* | 
|  | * Only allow association to be started if a valid SSID | 
|  | * is configured. | 
|  | */ | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (!(ifmgd->flags & IEEE80211_STA_EXT_SME) || | 
|  | ifmgd->state != IEEE80211_STA_MLME_ASSOCIATE) | 
|  | set_bit(IEEE80211_STA_REQ_AUTH, &ifmgd->request); | 
|  | else if (ifmgd->flags & IEEE80211_STA_EXT_SME) | 
|  | set_bit(IEEE80211_STA_REQ_RUN, &ifmgd->request); | 
|  | queue_work(local->hw.workqueue, &ifmgd->work); | 
|  | } | 
|  | } | 
|  |  | 
|  | int ieee80211_sta_commit(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  |  | 
|  | if (ifmgd->ssid_len) | 
|  | ifmgd->flags |= IEEE80211_STA_SSID_SET; | 
|  | else | 
|  | ifmgd->flags &= ~IEEE80211_STA_SSID_SET; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int ieee80211_sta_set_ssid(struct ieee80211_sub_if_data *sdata, char *ssid, size_t len) | 
|  | { | 
|  | struct ieee80211_if_managed *ifmgd; | 
|  |  | 
|  | if (len > IEEE80211_MAX_SSID_LEN) | 
|  | return -EINVAL; | 
|  |  | 
|  | ifmgd = &sdata->u.mgd; | 
|  |  | 
|  | if (ifmgd->ssid_len != len || memcmp(ifmgd->ssid, ssid, len) != 0) { | 
|  | if (ifmgd->state == IEEE80211_STA_MLME_ASSOCIATED) | 
|  | ieee80211_set_disassoc(sdata, true, true, | 
|  | WLAN_REASON_DEAUTH_LEAVING); | 
|  |  | 
|  | /* | 
|  | * Do not use reassociation if SSID is changed (different ESS). | 
|  | */ | 
|  | ifmgd->flags &= ~IEEE80211_STA_PREV_BSSID_SET; | 
|  | memset(ifmgd->ssid, 0, sizeof(ifmgd->ssid)); | 
|  | memcpy(ifmgd->ssid, ssid, len); | 
|  | ifmgd->ssid_len = len; | 
|  | } | 
|  |  | 
|  | return ieee80211_sta_commit(sdata); | 
|  | } | 
|  |  | 
|  | int ieee80211_sta_get_ssid(struct ieee80211_sub_if_data *sdata, char *ssid, size_t *len) | 
|  | { | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  | memcpy(ssid, ifmgd->ssid, ifmgd->ssid_len); | 
|  | *len = ifmgd->ssid_len; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int ieee80211_sta_set_bssid(struct ieee80211_sub_if_data *sdata, u8 *bssid) | 
|  | { | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  |  | 
|  | if (compare_ether_addr(bssid, ifmgd->bssid) != 0 && | 
|  | ifmgd->state == IEEE80211_STA_MLME_ASSOCIATED) | 
|  | ieee80211_set_disassoc(sdata, true, true, | 
|  | WLAN_REASON_DEAUTH_LEAVING); | 
|  |  | 
|  | if (is_valid_ether_addr(bssid)) { | 
|  | memcpy(ifmgd->bssid, bssid, ETH_ALEN); | 
|  | ifmgd->flags |= IEEE80211_STA_BSSID_SET; | 
|  | } else { | 
|  | memset(ifmgd->bssid, 0, ETH_ALEN); | 
|  | ifmgd->flags &= ~IEEE80211_STA_BSSID_SET; | 
|  | } | 
|  |  | 
|  | return ieee80211_sta_commit(sdata); | 
|  | } | 
|  |  | 
|  | int ieee80211_sta_set_extra_ie(struct ieee80211_sub_if_data *sdata, | 
|  | const char *ie, size_t len) | 
|  | { | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  |  | 
|  | if (len == 0 && ifmgd->extra_ie_len == 0) | 
|  | return -EALREADY; | 
|  |  | 
|  | if (len == ifmgd->extra_ie_len && ifmgd->extra_ie && | 
|  | memcmp(ifmgd->extra_ie, ie, len) == 0) | 
|  | return -EALREADY; | 
|  |  | 
|  | kfree(ifmgd->extra_ie); | 
|  | if (len == 0) { | 
|  | ifmgd->extra_ie = NULL; | 
|  | ifmgd->extra_ie_len = 0; | 
|  | return 0; | 
|  | } | 
|  | ifmgd->extra_ie = kmalloc(len, GFP_KERNEL); | 
|  | if (!ifmgd->extra_ie) { | 
|  | ifmgd->extra_ie_len = 0; | 
|  | return -ENOMEM; | 
|  | } | 
|  | memcpy(ifmgd->extra_ie, ie, len); | 
|  | ifmgd->extra_ie_len = len; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int ieee80211_sta_deauthenticate(struct ieee80211_sub_if_data *sdata, u16 reason) | 
|  | { | 
|  | printk(KERN_DEBUG "%s: deauthenticating by local choice (reason=%d)\n", | 
|  | sdata->dev->name, reason); | 
|  |  | 
|  | ieee80211_set_disassoc(sdata, true, true, reason); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int ieee80211_sta_disassociate(struct ieee80211_sub_if_data *sdata, u16 reason) | 
|  | { | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  |  | 
|  | printk(KERN_DEBUG "%s: disassociating by local choice (reason=%d)\n", | 
|  | sdata->dev->name, reason); | 
|  |  | 
|  | if (!(ifmgd->flags & IEEE80211_STA_ASSOCIATED)) | 
|  | return -ENOLINK; | 
|  |  | 
|  | ieee80211_set_disassoc(sdata, false, true, reason); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* scan finished notification */ | 
|  | void ieee80211_mlme_notify_scan_completed(struct ieee80211_local *local) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = local->scan_sdata; | 
|  |  | 
|  | /* Restart STA timers */ | 
|  | rcu_read_lock(); | 
|  | list_for_each_entry_rcu(sdata, &local->interfaces, list) | 
|  | ieee80211_restart_sta_timer(sdata); | 
|  | rcu_read_unlock(); | 
|  | } | 
|  |  | 
|  | int ieee80211_max_network_latency(struct notifier_block *nb, | 
|  | unsigned long data, void *dummy) | 
|  | { | 
|  | s32 latency_usec = (s32) data; | 
|  | struct ieee80211_local *local = | 
|  | container_of(nb, struct ieee80211_local, | 
|  | network_latency_notifier); | 
|  |  | 
|  | mutex_lock(&local->iflist_mtx); | 
|  | ieee80211_recalc_ps(local, latency_usec); | 
|  | mutex_unlock(&local->iflist_mtx); | 
|  |  | 
|  | return 0; | 
|  | } |