| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2012 Altera <www.altera.com> |
| */ |
| |
| #include <dt-bindings/reset/altr,rst-mgr.h> |
| |
| / { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| aliases { |
| serial0 = &uart0; |
| serial1 = &uart1; |
| timer0 = &timer0; |
| timer1 = &timer1; |
| timer2 = &timer2; |
| timer3 = &timer3; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| enable-method = "altr,socfpga-smp"; |
| |
| cpu0: cpu@0 { |
| compatible = "arm,cortex-a9"; |
| device_type = "cpu"; |
| reg = <0>; |
| next-level-cache = <&L2>; |
| }; |
| cpu1: cpu@1 { |
| compatible = "arm,cortex-a9"; |
| device_type = "cpu"; |
| reg = <1>; |
| next-level-cache = <&L2>; |
| }; |
| }; |
| |
| pmu: pmu@ff111000 { |
| compatible = "arm,cortex-a9-pmu"; |
| interrupt-parent = <&intc>; |
| interrupts = <0 176 4>, <0 177 4>; |
| interrupt-affinity = <&cpu0>, <&cpu1>; |
| reg = <0xff111000 0x1000>, |
| <0xff113000 0x1000>; |
| }; |
| |
| intc: intc@fffed000 { |
| compatible = "arm,cortex-a9-gic"; |
| #interrupt-cells = <3>; |
| interrupt-controller; |
| reg = <0xfffed000 0x1000>, |
| <0xfffec100 0x100>; |
| }; |
| |
| soc { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "simple-bus"; |
| device_type = "soc"; |
| interrupt-parent = <&intc>; |
| ranges; |
| |
| amba { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| pdma: pdma@ffe01000 { |
| compatible = "arm,pl330", "arm,primecell"; |
| reg = <0xffe01000 0x1000>; |
| interrupts = <0 104 4>, |
| <0 105 4>, |
| <0 106 4>, |
| <0 107 4>, |
| <0 108 4>, |
| <0 109 4>, |
| <0 110 4>, |
| <0 111 4>; |
| #dma-cells = <1>; |
| #dma-channels = <8>; |
| #dma-requests = <32>; |
| clocks = <&l4_main_clk>; |
| clock-names = "apb_pclk"; |
| resets = <&rst DMA_RESET>; |
| reset-names = "dma"; |
| }; |
| }; |
| |
| base_fpga_region { |
| compatible = "fpga-region"; |
| fpga-mgr = <&fpgamgr0>; |
| |
| #address-cells = <0x1>; |
| #size-cells = <0x1>; |
| }; |
| |
| can0: can@ffc00000 { |
| compatible = "bosch,d_can"; |
| reg = <0xffc00000 0x1000>; |
| interrupts = <0 131 4>, <0 132 4>, <0 133 4>, <0 134 4>; |
| clocks = <&can0_clk>; |
| resets = <&rst CAN0_RESET>; |
| status = "disabled"; |
| }; |
| |
| can1: can@ffc01000 { |
| compatible = "bosch,d_can"; |
| reg = <0xffc01000 0x1000>; |
| interrupts = <0 135 4>, <0 136 4>, <0 137 4>, <0 138 4>; |
| clocks = <&can1_clk>; |
| resets = <&rst CAN1_RESET>; |
| status = "disabled"; |
| }; |
| |
| clkmgr@ffd04000 { |
| compatible = "altr,clk-mgr"; |
| reg = <0xffd04000 0x1000>; |
| |
| clocks { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| osc1: osc1 { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| }; |
| |
| osc2: osc2 { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| }; |
| |
| f2s_periph_ref_clk: f2s_periph_ref_clk { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| }; |
| |
| f2s_sdram_ref_clk: f2s_sdram_ref_clk { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| }; |
| |
| main_pll: main_pll@40 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| #clock-cells = <0>; |
| compatible = "altr,socfpga-pll-clock"; |
| clocks = <&osc1>; |
| reg = <0x40>; |
| |
| mpuclk: mpuclk@48 { |
| #clock-cells = <0>; |
| compatible = "altr,socfpga-perip-clk"; |
| clocks = <&main_pll>; |
| div-reg = <0xe0 0 9>; |
| reg = <0x48>; |
| }; |
| |
| mainclk: mainclk@4c { |
| #clock-cells = <0>; |
| compatible = "altr,socfpga-perip-clk"; |
| clocks = <&main_pll>; |
| div-reg = <0xe4 0 9>; |
| reg = <0x4C>; |
| }; |
| |
| dbg_base_clk: dbg_base_clk@50 { |
| #clock-cells = <0>; |
| compatible = "altr,socfpga-perip-clk"; |
| clocks = <&main_pll>, <&osc1>; |
| div-reg = <0xe8 0 9>; |
| reg = <0x50>; |
| }; |
| |
| main_qspi_clk: main_qspi_clk@54 { |
| #clock-cells = <0>; |
| compatible = "altr,socfpga-perip-clk"; |
| clocks = <&main_pll>; |
| reg = <0x54>; |
| }; |
| |
| main_nand_sdmmc_clk: main_nand_sdmmc_clk@58 { |
| #clock-cells = <0>; |
| compatible = "altr,socfpga-perip-clk"; |
| clocks = <&main_pll>; |
| reg = <0x58>; |
| }; |
| |
| cfg_h2f_usr0_clk: cfg_h2f_usr0_clk@5c { |
| #clock-cells = <0>; |
| compatible = "altr,socfpga-perip-clk"; |
| clocks = <&main_pll>; |
| reg = <0x5C>; |
| }; |
| }; |
| |
| periph_pll: periph_pll@80 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| #clock-cells = <0>; |
| compatible = "altr,socfpga-pll-clock"; |
| clocks = <&osc1>, <&osc2>, <&f2s_periph_ref_clk>; |
| reg = <0x80>; |
| |
| emac0_clk: emac0_clk@88 { |
| #clock-cells = <0>; |
| compatible = "altr,socfpga-perip-clk"; |
| clocks = <&periph_pll>; |
| reg = <0x88>; |
| }; |
| |
| emac1_clk: emac1_clk@8c { |
| #clock-cells = <0>; |
| compatible = "altr,socfpga-perip-clk"; |
| clocks = <&periph_pll>; |
| reg = <0x8C>; |
| }; |
| |
| per_qspi_clk: per_qsi_clk@90 { |
| #clock-cells = <0>; |
| compatible = "altr,socfpga-perip-clk"; |
| clocks = <&periph_pll>; |
| reg = <0x90>; |
| }; |
| |
| per_nand_mmc_clk: per_nand_mmc_clk@94 { |
| #clock-cells = <0>; |
| compatible = "altr,socfpga-perip-clk"; |
| clocks = <&periph_pll>; |
| reg = <0x94>; |
| }; |
| |
| per_base_clk: per_base_clk@98 { |
| #clock-cells = <0>; |
| compatible = "altr,socfpga-perip-clk"; |
| clocks = <&periph_pll>; |
| reg = <0x98>; |
| }; |
| |
| h2f_usr1_clk: h2f_usr1_clk@9c { |
| #clock-cells = <0>; |
| compatible = "altr,socfpga-perip-clk"; |
| clocks = <&periph_pll>; |
| reg = <0x9C>; |
| }; |
| }; |
| |
| sdram_pll: sdram_pll@c0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| #clock-cells = <0>; |
| compatible = "altr,socfpga-pll-clock"; |
| clocks = <&osc1>, <&osc2>, <&f2s_sdram_ref_clk>; |
| reg = <0xC0>; |
| |
| ddr_dqs_clk: ddr_dqs_clk@c8 { |
| #clock-cells = <0>; |
| compatible = "altr,socfpga-perip-clk"; |
| clocks = <&sdram_pll>; |
| reg = <0xC8>; |
| }; |
| |
| ddr_2x_dqs_clk: ddr_2x_dqs_clk@cc { |
| #clock-cells = <0>; |
| compatible = "altr,socfpga-perip-clk"; |
| clocks = <&sdram_pll>; |
| reg = <0xCC>; |
| }; |
| |
| ddr_dq_clk: ddr_dq_clk@d0 { |
| #clock-cells = <0>; |
| compatible = "altr,socfpga-perip-clk"; |
| clocks = <&sdram_pll>; |
| reg = <0xD0>; |
| }; |
| |
| h2f_usr2_clk: h2f_usr2_clk@d4 { |
| #clock-cells = <0>; |
| compatible = "altr,socfpga-perip-clk"; |
| clocks = <&sdram_pll>; |
| reg = <0xD4>; |
| }; |
| }; |
| |
| mpu_periph_clk: mpu_periph_clk { |
| #clock-cells = <0>; |
| compatible = "altr,socfpga-perip-clk"; |
| clocks = <&mpuclk>; |
| fixed-divider = <4>; |
| }; |
| |
| mpu_l2_ram_clk: mpu_l2_ram_clk { |
| #clock-cells = <0>; |
| compatible = "altr,socfpga-perip-clk"; |
| clocks = <&mpuclk>; |
| fixed-divider = <2>; |
| }; |
| |
| l4_main_clk: l4_main_clk { |
| #clock-cells = <0>; |
| compatible = "altr,socfpga-gate-clk"; |
| clocks = <&mainclk>; |
| clk-gate = <0x60 0>; |
| }; |
| |
| l3_main_clk: l3_main_clk { |
| #clock-cells = <0>; |
| compatible = "altr,socfpga-perip-clk"; |
| clocks = <&mainclk>; |
| fixed-divider = <1>; |
| }; |
| |
| l3_mp_clk: l3_mp_clk { |
| #clock-cells = <0>; |
| compatible = "altr,socfpga-gate-clk"; |
| clocks = <&mainclk>; |
| div-reg = <0x64 0 2>; |
| clk-gate = <0x60 1>; |
| }; |
| |
| l3_sp_clk: l3_sp_clk { |
| #clock-cells = <0>; |
| compatible = "altr,socfpga-gate-clk"; |
| clocks = <&l3_mp_clk>; |
| div-reg = <0x64 2 2>; |
| }; |
| |
| l4_mp_clk: l4_mp_clk { |
| #clock-cells = <0>; |
| compatible = "altr,socfpga-gate-clk"; |
| clocks = <&mainclk>, <&per_base_clk>; |
| div-reg = <0x64 4 3>; |
| clk-gate = <0x60 2>; |
| }; |
| |
| l4_sp_clk: l4_sp_clk { |
| #clock-cells = <0>; |
| compatible = "altr,socfpga-gate-clk"; |
| clocks = <&mainclk>, <&per_base_clk>; |
| div-reg = <0x64 7 3>; |
| clk-gate = <0x60 3>; |
| }; |
| |
| dbg_at_clk: dbg_at_clk { |
| #clock-cells = <0>; |
| compatible = "altr,socfpga-gate-clk"; |
| clocks = <&dbg_base_clk>; |
| div-reg = <0x68 0 2>; |
| clk-gate = <0x60 4>; |
| }; |
| |
| dbg_clk: dbg_clk { |
| #clock-cells = <0>; |
| compatible = "altr,socfpga-gate-clk"; |
| clocks = <&dbg_at_clk>; |
| div-reg = <0x68 2 2>; |
| clk-gate = <0x60 5>; |
| }; |
| |
| dbg_trace_clk: dbg_trace_clk { |
| #clock-cells = <0>; |
| compatible = "altr,socfpga-gate-clk"; |
| clocks = <&dbg_base_clk>; |
| div-reg = <0x6C 0 3>; |
| clk-gate = <0x60 6>; |
| }; |
| |
| dbg_timer_clk: dbg_timer_clk { |
| #clock-cells = <0>; |
| compatible = "altr,socfpga-gate-clk"; |
| clocks = <&dbg_base_clk>; |
| clk-gate = <0x60 7>; |
| }; |
| |
| cfg_clk: cfg_clk { |
| #clock-cells = <0>; |
| compatible = "altr,socfpga-gate-clk"; |
| clocks = <&cfg_h2f_usr0_clk>; |
| clk-gate = <0x60 8>; |
| }; |
| |
| h2f_user0_clk: h2f_user0_clk { |
| #clock-cells = <0>; |
| compatible = "altr,socfpga-gate-clk"; |
| clocks = <&cfg_h2f_usr0_clk>; |
| clk-gate = <0x60 9>; |
| }; |
| |
| emac_0_clk: emac_0_clk { |
| #clock-cells = <0>; |
| compatible = "altr,socfpga-gate-clk"; |
| clocks = <&emac0_clk>; |
| clk-gate = <0xa0 0>; |
| }; |
| |
| emac_1_clk: emac_1_clk { |
| #clock-cells = <0>; |
| compatible = "altr,socfpga-gate-clk"; |
| clocks = <&emac1_clk>; |
| clk-gate = <0xa0 1>; |
| }; |
| |
| usb_mp_clk: usb_mp_clk { |
| #clock-cells = <0>; |
| compatible = "altr,socfpga-gate-clk"; |
| clocks = <&per_base_clk>; |
| clk-gate = <0xa0 2>; |
| div-reg = <0xa4 0 3>; |
| }; |
| |
| spi_m_clk: spi_m_clk { |
| #clock-cells = <0>; |
| compatible = "altr,socfpga-gate-clk"; |
| clocks = <&per_base_clk>; |
| clk-gate = <0xa0 3>; |
| div-reg = <0xa4 3 3>; |
| }; |
| |
| can0_clk: can0_clk { |
| #clock-cells = <0>; |
| compatible = "altr,socfpga-gate-clk"; |
| clocks = <&per_base_clk>; |
| clk-gate = <0xa0 4>; |
| div-reg = <0xa4 6 3>; |
| }; |
| |
| can1_clk: can1_clk { |
| #clock-cells = <0>; |
| compatible = "altr,socfpga-gate-clk"; |
| clocks = <&per_base_clk>; |
| clk-gate = <0xa0 5>; |
| div-reg = <0xa4 9 3>; |
| }; |
| |
| gpio_db_clk: gpio_db_clk { |
| #clock-cells = <0>; |
| compatible = "altr,socfpga-gate-clk"; |
| clocks = <&per_base_clk>; |
| clk-gate = <0xa0 6>; |
| div-reg = <0xa8 0 24>; |
| }; |
| |
| h2f_user1_clk: h2f_user1_clk { |
| #clock-cells = <0>; |
| compatible = "altr,socfpga-gate-clk"; |
| clocks = <&h2f_usr1_clk>; |
| clk-gate = <0xa0 7>; |
| }; |
| |
| sdmmc_clk: sdmmc_clk { |
| #clock-cells = <0>; |
| compatible = "altr,socfpga-gate-clk"; |
| clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>; |
| clk-gate = <0xa0 8>; |
| clk-phase = <0 135>; |
| }; |
| |
| sdmmc_clk_divided: sdmmc_clk_divided { |
| #clock-cells = <0>; |
| compatible = "altr,socfpga-gate-clk"; |
| clocks = <&sdmmc_clk>; |
| clk-gate = <0xa0 8>; |
| fixed-divider = <4>; |
| }; |
| |
| nand_x_clk: nand_x_clk { |
| #clock-cells = <0>; |
| compatible = "altr,socfpga-gate-clk"; |
| clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>; |
| clk-gate = <0xa0 9>; |
| }; |
| |
| nand_ecc_clk: nand_ecc_clk { |
| #clock-cells = <0>; |
| compatible = "altr,socfpga-gate-clk"; |
| clocks = <&nand_x_clk>; |
| clk-gate = <0xa0 9>; |
| }; |
| |
| nand_clk: nand_clk { |
| #clock-cells = <0>; |
| compatible = "altr,socfpga-gate-clk"; |
| clocks = <&nand_x_clk>; |
| clk-gate = <0xa0 10>; |
| fixed-divider = <4>; |
| }; |
| |
| qspi_clk: qspi_clk { |
| #clock-cells = <0>; |
| compatible = "altr,socfpga-gate-clk"; |
| clocks = <&f2s_periph_ref_clk>, <&main_qspi_clk>, <&per_qspi_clk>; |
| clk-gate = <0xa0 11>; |
| }; |
| |
| ddr_dqs_clk_gate: ddr_dqs_clk_gate { |
| #clock-cells = <0>; |
| compatible = "altr,socfpga-gate-clk"; |
| clocks = <&ddr_dqs_clk>; |
| clk-gate = <0xd8 0>; |
| }; |
| |
| ddr_2x_dqs_clk_gate: ddr_2x_dqs_clk_gate { |
| #clock-cells = <0>; |
| compatible = "altr,socfpga-gate-clk"; |
| clocks = <&ddr_2x_dqs_clk>; |
| clk-gate = <0xd8 1>; |
| }; |
| |
| ddr_dq_clk_gate: ddr_dq_clk_gate { |
| #clock-cells = <0>; |
| compatible = "altr,socfpga-gate-clk"; |
| clocks = <&ddr_dq_clk>; |
| clk-gate = <0xd8 2>; |
| }; |
| |
| h2f_user2_clk: h2f_user2_clk { |
| #clock-cells = <0>; |
| compatible = "altr,socfpga-gate-clk"; |
| clocks = <&h2f_usr2_clk>; |
| clk-gate = <0xd8 3>; |
| }; |
| |
| }; |
| }; |
| |
| fpga_bridge0: fpga_bridge@ff400000 { |
| compatible = "altr,socfpga-lwhps2fpga-bridge"; |
| reg = <0xff400000 0x100000>; |
| resets = <&rst LWHPS2FPGA_RESET>; |
| clocks = <&l4_main_clk>; |
| status = "disabled"; |
| }; |
| |
| fpga_bridge1: fpga_bridge@ff500000 { |
| compatible = "altr,socfpga-hps2fpga-bridge"; |
| reg = <0xff500000 0x10000>; |
| resets = <&rst HPS2FPGA_RESET>; |
| clocks = <&l4_main_clk>; |
| status = "disabled"; |
| }; |
| |
| fpga_bridge2: fpga-bridge@ff600000 { |
| compatible = "altr,socfpga-fpga2hps-bridge"; |
| reg = <0xff600000 0x100000>; |
| resets = <&rst FPGA2HPS_RESET>; |
| clocks = <&l4_main_clk>; |
| status = "disabled"; |
| }; |
| |
| fpga_bridge3: fpga-bridge@ffc25080 { |
| compatible = "altr,socfpga-fpga2sdram-bridge"; |
| reg = <0xffc25080 0x4>; |
| status = "disabled"; |
| }; |
| |
| fpgamgr0: fpgamgr@ff706000 { |
| compatible = "altr,socfpga-fpga-mgr"; |
| reg = <0xff706000 0x1000 |
| 0xffb90000 0x4>; |
| interrupts = <0 175 4>; |
| }; |
| |
| gmac0: ethernet@ff700000 { |
| compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac"; |
| altr,sysmgr-syscon = <&sysmgr 0x60 0>; |
| reg = <0xff700000 0x2000>; |
| interrupts = <0 115 4>; |
| interrupt-names = "macirq"; |
| mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */ |
| clocks = <&emac_0_clk>; |
| clock-names = "stmmaceth"; |
| resets = <&rst EMAC0_RESET>; |
| reset-names = "stmmaceth"; |
| snps,multicast-filter-bins = <256>; |
| snps,perfect-filter-entries = <128>; |
| tx-fifo-depth = <4096>; |
| rx-fifo-depth = <4096>; |
| status = "disabled"; |
| }; |
| |
| gmac1: ethernet@ff702000 { |
| compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac"; |
| altr,sysmgr-syscon = <&sysmgr 0x60 2>; |
| reg = <0xff702000 0x2000>; |
| interrupts = <0 120 4>; |
| interrupt-names = "macirq"; |
| mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */ |
| clocks = <&emac_1_clk>; |
| clock-names = "stmmaceth"; |
| resets = <&rst EMAC1_RESET>; |
| reset-names = "stmmaceth"; |
| snps,multicast-filter-bins = <256>; |
| snps,perfect-filter-entries = <128>; |
| tx-fifo-depth = <4096>; |
| rx-fifo-depth = <4096>; |
| status = "disabled"; |
| }; |
| |
| gpio0: gpio@ff708000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "snps,dw-apb-gpio"; |
| reg = <0xff708000 0x1000>; |
| clocks = <&l4_mp_clk>; |
| resets = <&rst GPIO0_RESET>; |
| status = "disabled"; |
| |
| porta: gpio-controller@0 { |
| compatible = "snps,dw-apb-gpio-port"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| snps,nr-gpios = <29>; |
| reg = <0>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| interrupts = <0 164 4>; |
| }; |
| }; |
| |
| gpio1: gpio@ff709000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "snps,dw-apb-gpio"; |
| reg = <0xff709000 0x1000>; |
| clocks = <&l4_mp_clk>; |
| resets = <&rst GPIO1_RESET>; |
| status = "disabled"; |
| |
| portb: gpio-controller@0 { |
| compatible = "snps,dw-apb-gpio-port"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| snps,nr-gpios = <29>; |
| reg = <0>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| interrupts = <0 165 4>; |
| }; |
| }; |
| |
| gpio2: gpio@ff70a000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "snps,dw-apb-gpio"; |
| reg = <0xff70a000 0x1000>; |
| clocks = <&l4_mp_clk>; |
| resets = <&rst GPIO2_RESET>; |
| status = "disabled"; |
| |
| portc: gpio-controller@0 { |
| compatible = "snps,dw-apb-gpio-port"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| snps,nr-gpios = <27>; |
| reg = <0>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| interrupts = <0 166 4>; |
| }; |
| }; |
| |
| i2c0: i2c@ffc04000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "snps,designware-i2c"; |
| reg = <0xffc04000 0x1000>; |
| resets = <&rst I2C0_RESET>; |
| clocks = <&l4_sp_clk>; |
| interrupts = <0 158 0x4>; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@ffc05000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "snps,designware-i2c"; |
| reg = <0xffc05000 0x1000>; |
| resets = <&rst I2C1_RESET>; |
| clocks = <&l4_sp_clk>; |
| interrupts = <0 159 0x4>; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@ffc06000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "snps,designware-i2c"; |
| reg = <0xffc06000 0x1000>; |
| resets = <&rst I2C2_RESET>; |
| clocks = <&l4_sp_clk>; |
| interrupts = <0 160 0x4>; |
| status = "disabled"; |
| }; |
| |
| i2c3: i2c@ffc07000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "snps,designware-i2c"; |
| reg = <0xffc07000 0x1000>; |
| resets = <&rst I2C3_RESET>; |
| clocks = <&l4_sp_clk>; |
| interrupts = <0 161 0x4>; |
| status = "disabled"; |
| }; |
| |
| eccmgr: eccmgr { |
| compatible = "altr,socfpga-ecc-manager"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| l2-ecc@ffd08140 { |
| compatible = "altr,socfpga-l2-ecc"; |
| reg = <0xffd08140 0x4>; |
| interrupts = <0 36 1>, <0 37 1>; |
| }; |
| |
| ocram-ecc@ffd08144 { |
| compatible = "altr,socfpga-ocram-ecc"; |
| reg = <0xffd08144 0x4>; |
| iram = <&ocram>; |
| interrupts = <0 178 1>, <0 179 1>; |
| }; |
| }; |
| |
| L2: cache-controller@fffef000 { |
| compatible = "arm,pl310-cache"; |
| reg = <0xfffef000 0x1000>; |
| interrupts = <0 38 0x04>; |
| cache-unified; |
| cache-level = <2>; |
| arm,tag-latency = <1 1 1>; |
| arm,data-latency = <2 1 1>; |
| prefetch-data = <1>; |
| prefetch-instr = <1>; |
| arm,shared-override; |
| arm,double-linefill = <1>; |
| arm,double-linefill-incr = <0>; |
| arm,double-linefill-wrap = <1>; |
| arm,prefetch-drop = <0>; |
| arm,prefetch-offset = <7>; |
| }; |
| |
| l3regs@0xff800000 { |
| compatible = "altr,l3regs", "syscon"; |
| reg = <0xff800000 0x1000>; |
| }; |
| |
| mmc: dwmmc0@ff704000 { |
| compatible = "altr,socfpga-dw-mshc"; |
| reg = <0xff704000 0x1000>; |
| interrupts = <0 139 4>; |
| fifo-depth = <0x400>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&l4_mp_clk>, <&sdmmc_clk_divided>; |
| clock-names = "biu", "ciu"; |
| resets = <&rst SDMMC_RESET>; |
| status = "disabled"; |
| }; |
| |
| nand0: nand@ff900000 { |
| #address-cells = <0x1>; |
| #size-cells = <0x0>; |
| compatible = "altr,socfpga-denali-nand"; |
| reg = <0xff900000 0x100000>, |
| <0xffb80000 0x10000>; |
| reg-names = "nand_data", "denali_reg"; |
| interrupts = <0x0 0x90 0x4>; |
| clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>; |
| clock-names = "nand", "nand_x", "ecc"; |
| resets = <&rst NAND_RESET>; |
| status = "disabled"; |
| }; |
| |
| ocram: sram@ffff0000 { |
| compatible = "mmio-sram"; |
| reg = <0xffff0000 0x10000>; |
| }; |
| |
| qspi: spi@ff705000 { |
| compatible = "intel,socfpga-qspi", "cdns,qspi-nor"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0xff705000 0x1000>, |
| <0xffa00000 0x1000>; |
| interrupts = <0 151 4>; |
| cdns,fifo-depth = <128>; |
| cdns,fifo-width = <4>; |
| cdns,trigger-address = <0x00000000>; |
| clocks = <&qspi_clk>; |
| resets = <&rst QSPI_RESET>; |
| status = "disabled"; |
| }; |
| |
| rst: rstmgr@ffd05000 { |
| #reset-cells = <1>; |
| compatible = "altr,rst-mgr"; |
| reg = <0xffd05000 0x1000>; |
| altr,modrst-offset = <0x10>; |
| }; |
| |
| scu: snoop-control-unit@fffec000 { |
| compatible = "arm,cortex-a9-scu"; |
| reg = <0xfffec000 0x100>; |
| }; |
| |
| sdr: sdr@ffc25000 { |
| compatible = "altr,sdr-ctl", "syscon"; |
| reg = <0xffc25000 0x1000>; |
| resets = <&rst SDR_RESET>; |
| }; |
| |
| sdramedac { |
| compatible = "altr,sdram-edac"; |
| altr,sdr-syscon = <&sdr>; |
| interrupts = <0 39 4>; |
| }; |
| |
| spi0: spi@fff00000 { |
| compatible = "snps,dw-apb-ssi"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0xfff00000 0x1000>; |
| interrupts = <0 154 4>; |
| num-cs = <4>; |
| clocks = <&spi_m_clk>; |
| resets = <&rst SPIM0_RESET>; |
| reset-names = "spi"; |
| status = "disabled"; |
| }; |
| |
| spi1: spi@fff01000 { |
| compatible = "snps,dw-apb-ssi"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0xfff01000 0x1000>; |
| interrupts = <0 155 4>; |
| num-cs = <4>; |
| clocks = <&spi_m_clk>; |
| resets = <&rst SPIM1_RESET>; |
| reset-names = "spi"; |
| status = "disabled"; |
| }; |
| |
| sysmgr: sysmgr@ffd08000 { |
| compatible = "altr,sys-mgr", "syscon"; |
| reg = <0xffd08000 0x4000>; |
| }; |
| |
| /* Local timer */ |
| timer@fffec600 { |
| compatible = "arm,cortex-a9-twd-timer"; |
| reg = <0xfffec600 0x100>; |
| interrupts = <1 13 0xf01>; |
| clocks = <&mpu_periph_clk>; |
| }; |
| |
| timer0: timer0@ffc08000 { |
| compatible = "snps,dw-apb-timer"; |
| interrupts = <0 167 4>; |
| reg = <0xffc08000 0x1000>; |
| clocks = <&l4_sp_clk>; |
| clock-names = "timer"; |
| resets = <&rst SPTIMER0_RESET>; |
| reset-names = "timer"; |
| }; |
| |
| timer1: timer1@ffc09000 { |
| compatible = "snps,dw-apb-timer"; |
| interrupts = <0 168 4>; |
| reg = <0xffc09000 0x1000>; |
| clocks = <&l4_sp_clk>; |
| clock-names = "timer"; |
| resets = <&rst SPTIMER1_RESET>; |
| reset-names = "timer"; |
| }; |
| |
| timer2: timer2@ffd00000 { |
| compatible = "snps,dw-apb-timer"; |
| interrupts = <0 169 4>; |
| reg = <0xffd00000 0x1000>; |
| clocks = <&osc1>; |
| clock-names = "timer"; |
| resets = <&rst OSC1TIMER0_RESET>; |
| reset-names = "timer"; |
| }; |
| |
| timer3: timer3@ffd01000 { |
| compatible = "snps,dw-apb-timer"; |
| interrupts = <0 170 4>; |
| reg = <0xffd01000 0x1000>; |
| clocks = <&osc1>; |
| clock-names = "timer"; |
| resets = <&rst OSC1TIMER1_RESET>; |
| reset-names = "timer"; |
| }; |
| |
| uart0: serial0@ffc02000 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0xffc02000 0x1000>; |
| interrupts = <0 162 4>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&l4_sp_clk>; |
| dmas = <&pdma 28>, |
| <&pdma 29>; |
| dma-names = "tx", "rx"; |
| resets = <&rst UART0_RESET>; |
| }; |
| |
| uart1: serial1@ffc03000 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0xffc03000 0x1000>; |
| interrupts = <0 163 4>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&l4_sp_clk>; |
| dmas = <&pdma 30>, |
| <&pdma 31>; |
| dma-names = "tx", "rx"; |
| resets = <&rst UART1_RESET>; |
| }; |
| |
| usbphy0: usbphy { |
| #phy-cells = <0>; |
| compatible = "usb-nop-xceiv"; |
| status = "okay"; |
| }; |
| |
| usb0: usb@ffb00000 { |
| compatible = "snps,dwc2"; |
| reg = <0xffb00000 0xffff>; |
| interrupts = <0 125 4>; |
| clocks = <&usb_mp_clk>; |
| clock-names = "otg"; |
| resets = <&rst USB0_RESET>; |
| reset-names = "dwc2"; |
| phys = <&usbphy0>; |
| phy-names = "usb2-phy"; |
| status = "disabled"; |
| }; |
| |
| usb1: usb@ffb40000 { |
| compatible = "snps,dwc2"; |
| reg = <0xffb40000 0xffff>; |
| interrupts = <0 128 4>; |
| clocks = <&usb_mp_clk>; |
| clock-names = "otg"; |
| resets = <&rst USB1_RESET>; |
| reset-names = "dwc2"; |
| phys = <&usbphy0>; |
| phy-names = "usb2-phy"; |
| status = "disabled"; |
| }; |
| |
| watchdog0: watchdog@ffd02000 { |
| compatible = "snps,dw-wdt"; |
| reg = <0xffd02000 0x1000>; |
| interrupts = <0 171 4>; |
| clocks = <&osc1>; |
| resets = <&rst L4WD0_RESET>; |
| status = "disabled"; |
| }; |
| |
| watchdog1: watchdog@ffd03000 { |
| compatible = "snps,dw-wdt"; |
| reg = <0xffd03000 0x1000>; |
| interrupts = <0 172 4>; |
| clocks = <&osc1>; |
| resets = <&rst L4WD1_RESET>; |
| status = "disabled"; |
| }; |
| }; |
| }; |
