| # SPDX-License-Identifier: GPL-2.0-only |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/mfd/maxim,max77802.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Maxim MAX77802 Power Management IC |
| |
| maintainers: |
| - Javier Martinez Canillas <javier@dowhile0.org> |
| - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> |
| |
| description: | |
| This is a part of device tree bindings for Maxim MAX77802 Power Management |
| Integrated Circuit (PMIC). |
| |
| The Maxim MAX77802 is a Power Management IC which includes voltage and |
| current regulators (10 high efficiency Buck regulators and 32 Low-DropOut |
| (LDO)), RTC and clock outputs. |
| |
| The MAX77802 provides two 32.768khz clock outputs that can be controlled |
| (gated/ungated) over I2C. The clock IDs are defined as preprocessor macros |
| in dt-bindings/clock/maxim,max77802.h. |
| |
| properties: |
| compatible: |
| const: maxim,max77802 |
| |
| '#clock-cells': |
| const: 1 |
| |
| interrupts: |
| maxItems: 1 |
| |
| reg: |
| maxItems: 1 |
| |
| regulators: |
| $ref: /schemas/regulator/maxim,max77802.yaml |
| description: |
| List of child nodes that specify the regulators. |
| |
| inb1-supply: |
| description: Power supply for buck1 |
| inb2-supply: |
| description: Power supply for buck2 |
| inb3-supply: |
| description: Power supply for buck3 |
| inb4-supply: |
| description: Power supply for buck4 |
| inb5-supply: |
| description: Power supply for buck5 |
| inb6-supply: |
| description: Power supply for buck6 |
| inb7-supply: |
| description: Power supply for buck7 |
| inb8-supply: |
| description: Power supply for buck8 |
| inb9-supply: |
| description: Power supply for buck9 |
| inb10-supply: |
| description: Power supply for buck10 |
| |
| inl1-supply: |
| description: Power supply for LDO8, LDO15 |
| inl2-supply: |
| description: Power supply for LDO17, LDO27, LDO30, LDO35 |
| inl3-supply: |
| description: Power supply for LDO3, LDO5, LDO7, LDO7 |
| inl4-supply: |
| description: Power supply for LDO10, LDO11, LDO13, LDO14 |
| inl5-supply: |
| description: Power supply for LDO9, LDO19 |
| inl6-supply: |
| description: Power supply for LDO4, LDO21, LDO24, LDO33 |
| inl7-supply: |
| description: Power supply for LDO18, LDO20, LDO28, LDO29 |
| inl9-supply: |
| description: Power supply for LDO12, LDO23, LDO25, LDO26, LDO32, LDO34 |
| inl10-supply: |
| description: Power supply for LDO1, LDO2 |
| |
| wakeup-source: true |
| |
| required: |
| - compatible |
| - '#clock-cells' |
| - reg |
| |
| additionalProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/interrupt-controller/irq.h> |
| #include <dt-bindings/regulator/maxim,max77802.h> |
| |
| i2c { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| pmic@9 { |
| compatible = "maxim,max77802"; |
| interrupt-parent = <&gpx3>; |
| interrupts = <1 IRQ_TYPE_NONE>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&max77802_irq>, <&pmic_selb>, |
| <&pmic_dvs_1>, <&pmic_dvs_2>, <&pmic_dvs_3>; |
| wakeup-source; |
| reg = <0x9>; |
| #clock-cells = <1>; |
| |
| inb1-supply = <&tps65090_dcdc2>; |
| inb2-supply = <&tps65090_dcdc1>; |
| inb3-supply = <&tps65090_dcdc2>; |
| inb4-supply = <&tps65090_dcdc2>; |
| inb5-supply = <&tps65090_dcdc1>; |
| inb6-supply = <&tps65090_dcdc2>; |
| inb7-supply = <&tps65090_dcdc1>; |
| inb8-supply = <&tps65090_dcdc1>; |
| inb9-supply = <&tps65090_dcdc1>; |
| inb10-supply = <&tps65090_dcdc1>; |
| |
| inl1-supply = <&buck5_reg>; |
| inl2-supply = <&buck7_reg>; |
| inl3-supply = <&buck9_reg>; |
| inl4-supply = <&buck9_reg>; |
| inl5-supply = <&buck9_reg>; |
| inl6-supply = <&tps65090_dcdc2>; |
| inl7-supply = <&buck9_reg>; |
| inl9-supply = <&tps65090_dcdc2>; |
| inl10-supply = <&buck7_reg>; |
| |
| regulators { |
| BUCK1 { |
| regulator-name = "vdd_mif"; |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <1300000>; |
| regulator-always-on; |
| regulator-boot-on; |
| regulator-ramp-delay = <12500>; |
| regulator-state-mem { |
| regulator-off-in-suspend; |
| }; |
| }; |
| |
| BUCK2 { |
| regulator-name = "vdd_arm"; |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <1500000>; |
| regulator-always-on; |
| regulator-boot-on; |
| regulator-ramp-delay = <12500>; |
| regulator-coupled-with = <&buck3_reg>; |
| regulator-coupled-max-spread = <300000>; |
| regulator-state-mem { |
| regulator-off-in-suspend; |
| }; |
| }; |
| |
| // ... |
| |
| BUCK10 { |
| regulator-name = "vdd_1v8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-always-on; |
| regulator-boot-on; |
| regulator-state-mem { |
| regulator-on-in-suspend; |
| }; |
| }; |
| |
| LDO1 { |
| regulator-name = "vdd_1v0"; |
| regulator-min-microvolt = <1000000>; |
| regulator-max-microvolt = <1000000>; |
| regulator-always-on; |
| regulator-initial-mode = <MAX77802_OPMODE_NORMAL>; |
| regulator-state-mem { |
| regulator-on-in-suspend; |
| regulator-mode = <MAX77802_OPMODE_LP>; |
| }; |
| }; |
| |
| // ... |
| |
| LDO35 { |
| regulator-name = "ldo_35"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| }; |
| }; |
| }; |
| }; |
