drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c - linux - Git at Google

 /******************************************************************************
  *
  * This file is provided under a dual BSD/GPLv2 license.  When using or
  * redistributing this file, you may do so under either license.
  *
  * GPL LICENSE SUMMARY
  *
  * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of version 2 of the GNU General Public License as
  * published by the Free Software Foundation.
  *
  * This program is distributed in the hope that it will be useful, but
  * WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  * General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
  * USA
  *
  * The full GNU General Public License is included in this distribution
  * in the file called LICENSE.GPL.
  *
  * Contact Information:
  *  Intel Linux Wireless <ilw@linux.intel.com>
  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  *
  * BSD LICENSE
  *
  * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved.
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
  * are met:
  *
  *  * Redistributions of source code must retain the above copyright
  *    notice, this list of conditions and the following disclaimer.
  *  * Redistributions in binary form must reproduce the above copyright
  *    notice, this list of conditions and the following disclaimer in
  *    the documentation and/or other materials provided with the
  *    distribution.
  *  * Neither the name Intel Corporation nor the names of its
  *    contributors may be used to endorse or promote products derived
  *    from this software without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  *****************************************************************************/

 #include <net/mac80211.h>
 #include "fw-api.h"
 #include "mvm.h"

 /* Maps the driver specific channel width definition to the the fw values */
 static inline u8 iwl_mvm_get_channel_width(struct cfg80211_chan_def *chandef)
 {
 	switch (chandef->width) {
 	case NL80211_CHAN_WIDTH_20_NOHT:
 	case NL80211_CHAN_WIDTH_20:
 		return PHY_VHT_CHANNEL_MODE20;
 	case NL80211_CHAN_WIDTH_40:
 		return PHY_VHT_CHANNEL_MODE40;
 	case NL80211_CHAN_WIDTH_80:
 		return PHY_VHT_CHANNEL_MODE80;
 	case NL80211_CHAN_WIDTH_160:
 		return PHY_VHT_CHANNEL_MODE160;
 	default:
 		WARN(1, "Invalid channel width=%u", chandef->width);
 		return PHY_VHT_CHANNEL_MODE20;
 	}
 }

 /*
  * Maps the driver specific control channel position (relative to the center
  * freq) definitions to the the fw values
  */
 static inline u8 iwl_mvm_get_ctrl_pos(struct cfg80211_chan_def *chandef)
 {
 	switch (chandef->chan->center_freq - chandef->center_freq1) {
 	case -70:
 		return PHY_VHT_CTRL_POS_4_BELOW;
 	case -50:
 		return PHY_VHT_CTRL_POS_3_BELOW;
 	case -30:
 		return PHY_VHT_CTRL_POS_2_BELOW;
 	case -10:
 		return PHY_VHT_CTRL_POS_1_BELOW;
 	case  10:
 		return PHY_VHT_CTRL_POS_1_ABOVE;
 	case  30:
 		return PHY_VHT_CTRL_POS_2_ABOVE;
 	case  50:
 		return PHY_VHT_CTRL_POS_3_ABOVE;
 	case  70:
 		return PHY_VHT_CTRL_POS_4_ABOVE;
 	default:
 		WARN(1, "Invalid channel definition");
 	case 0:
 		/*
 		 * The FW is expected to check the control channel position only
 		 * when in HT/VHT and the channel width is not 20MHz. Return
 		 * this value as the default one.
 		 */
 		return PHY_VHT_CTRL_POS_1_BELOW;
 	}
 }

 /*
  * Construct the generic fields of the PHY context command
  */
 static void iwl_mvm_phy_ctxt_cmd_hdr(struct iwl_mvm_phy_ctxt *ctxt,
 				     struct iwl_phy_context_cmd *cmd,
 				     u32 action, u32 apply_time)
 {
 	memset(cmd, 0, sizeof(struct iwl_phy_context_cmd));

 	cmd->id_and_color = cpu_to_le32(FW_CMD_ID_AND_COLOR(ctxt->id,
 							    ctxt->color));
 	cmd->action = cpu_to_le32(action);
 	cmd->apply_time = cpu_to_le32(apply_time);
 }

 /*
  * Add the phy configuration to the PHY context command
  */
 static void iwl_mvm_phy_ctxt_cmd_data(struct iwl_mvm *mvm,
 				      struct iwl_phy_context_cmd *cmd,
 				      struct cfg80211_chan_def *chandef,
 				      u8 chains_static, u8 chains_dynamic)
 {
 	u8 valid_rx_chains, active_cnt, idle_cnt;

 	/* Set the channel info data */
 	cmd->ci.band = (chandef->chan->band == IEEE80211_BAND_2GHZ ?
 	      PHY_BAND_24 : PHY_BAND_5);

 	cmd->ci.channel = chandef->chan->hw_value;
 	cmd->ci.width = iwl_mvm_get_channel_width(chandef);
 	cmd->ci.ctrl_pos = iwl_mvm_get_ctrl_pos(chandef);

 	/* Set rx the chains */

 	/* TODO:
 	 * Need to add on chain noise calibration limitations, and
 	 * BT coex considerations.
 	 */
 	valid_rx_chains = mvm->nvm_data->valid_rx_ant;
 	idle_cnt = chains_static;
 	active_cnt = chains_dynamic;

 	cmd->rxchain_info = cpu_to_le32(valid_rx_chains <<
 					PHY_RX_CHAIN_VALID_POS);
 	cmd->rxchain_info |= cpu_to_le32(idle_cnt << PHY_RX_CHAIN_CNT_POS);
 	cmd->rxchain_info |= cpu_to_le32(active_cnt <<
 					 PHY_RX_CHAIN_MIMO_CNT_POS);

 	cmd->txchain_info = cpu_to_le32(mvm->nvm_data->valid_tx_ant);
 }

 /*
  * Send a command to apply the current phy configuration. The command is send
  * only if something in the configuration changed: in case that this is the
  * first time that the phy configuration is applied or in case that the phy
  * configuration changed from the previous apply.
  */
 static int iwl_mvm_phy_ctxt_apply(struct iwl_mvm *mvm,
 				  struct iwl_mvm_phy_ctxt *ctxt,
 				  struct cfg80211_chan_def *chandef,
 				  u8 chains_static, u8 chains_dynamic,
 				  u32 action, u32 apply_time)
 {
 	struct iwl_phy_context_cmd cmd;
 	int ret;

 	/* Set the command header fields */
 	iwl_mvm_phy_ctxt_cmd_hdr(ctxt, &cmd, action, apply_time);

 	/* Set the command data */
 	iwl_mvm_phy_ctxt_cmd_data(mvm, &cmd, chandef,
 				  chains_static, chains_dynamic);

 	ret = iwl_mvm_send_cmd_pdu(mvm, PHY_CONTEXT_CMD, CMD_SYNC,
 				   sizeof(struct iwl_phy_context_cmd),
 				   &cmd);
 	if (ret)
 		IWL_ERR(mvm, "PHY ctxt cmd error. ret=%d\n", ret);
 	return ret;
 }


 struct phy_ctx_used_data {
 	unsigned long used[BITS_TO_LONGS(NUM_PHY_CTX)];
 };

 static void iwl_mvm_phy_ctx_used_iter(struct ieee80211_hw *hw,
 				      struct ieee80211_chanctx_conf *ctx,
 				      void *_data)
 {
 	struct phy_ctx_used_data *data = _data;
 	struct iwl_mvm_phy_ctxt *phy_ctxt = (void *)ctx->drv_priv;

 	__set_bit(phy_ctxt->id, data->used);
 }

 /*
  * Send a command to add a PHY context based on the current HW configuration.
  */
 int iwl_mvm_phy_ctxt_add(struct iwl_mvm *mvm, struct iwl_mvm_phy_ctxt *ctxt,
 			 struct cfg80211_chan_def *chandef,
 			 u8 chains_static, u8 chains_dynamic)
 {
 	struct phy_ctx_used_data data = {
 		.used = { },
 	};

 	/*
 	 * If this is a regular PHY context (not the ROC one)
 	 * skip the ROC PHY context's ID.
 	 */
 	if (ctxt != &mvm->phy_ctxt_roc)
 		__set_bit(mvm->phy_ctxt_roc.id, data.used);

 	lockdep_assert_held(&mvm->mutex);
 	ctxt->color++;

 	if (!test_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status)) {
 		ieee80211_iter_chan_contexts_atomic(
 			mvm->hw, iwl_mvm_phy_ctx_used_iter, &data);

 		ctxt->id = find_first_zero_bit(data.used, NUM_PHY_CTX);
 		if (WARN_ONCE(ctxt->id == NUM_PHY_CTX,
 			      "Failed to init PHY context - no free ID!\n"))
 			return -EIO;
 	}

 	ctxt->channel = chandef->chan;
 	return iwl_mvm_phy_ctxt_apply(mvm, ctxt, chandef,
 				      chains_static, chains_dynamic,
 				      FW_CTXT_ACTION_ADD, 0);
 }

 /*
  * Send a command to modify the PHY context based on the current HW
  * configuration. Note that the function does not check that the configuration
  * changed.
  */
 int iwl_mvm_phy_ctxt_changed(struct iwl_mvm *mvm, struct iwl_mvm_phy_ctxt *ctxt,
 			     struct cfg80211_chan_def *chandef,
 			     u8 chains_static, u8 chains_dynamic)
 {
 	lockdep_assert_held(&mvm->mutex);

 	ctxt->channel = chandef->chan;
 	return iwl_mvm_phy_ctxt_apply(mvm, ctxt, chandef,
 				      chains_static, chains_dynamic,
 				      FW_CTXT_ACTION_MODIFY, 0);
 }

 /*
  * Send a command to the FW to remove the given phy context.
  * Once the command is sent, regardless of success or failure, the context is
  * marked as invalid
  */
 void iwl_mvm_phy_ctxt_remove(struct iwl_mvm *mvm, struct iwl_mvm_phy_ctxt *ctxt)
 {
 	struct iwl_phy_context_cmd cmd;
 	int ret;

 	lockdep_assert_held(&mvm->mutex);

 	iwl_mvm_phy_ctxt_cmd_hdr(ctxt, &cmd, FW_CTXT_ACTION_REMOVE, 0);
 	ret = iwl_mvm_send_cmd_pdu(mvm, PHY_CONTEXT_CMD, CMD_SYNC,
 				   sizeof(struct iwl_phy_context_cmd),
 				   &cmd);
 	if (ret)
 		IWL_ERR(mvm, "Failed to send PHY remove: ctxt id=%d\n",
 			ctxt->id);
 }
	/******************************************************************************
	*
	* This file is provided under a dual BSD/GPLv2 license. When using or
	* redistributing this file, you may do so under either license.
	*
	* GPL LICENSE SUMMARY
	*
	* Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved.
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of version 2 of the GNU General Public License as
	* published by the Free Software Foundation.
	*
	* This program is distributed in the hope that it will be useful, but
	* WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
	* General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
	* USA
	*
	* The full GNU General Public License is included in this distribution
	* in the file called LICENSE.GPL.
	*
	* Contact Information:
	* Intel Linux Wireless <ilw@linux.intel.com>
	* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
	*
	* BSD LICENSE
	*
	* Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved.
	* All rights reserved.
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions
	* are met:
	*
	* * Redistributions of source code must retain the above copyright
	* notice, this list of conditions and the following disclaimer.
	* * Redistributions in binary form must reproduce the above copyright
	* notice, this list of conditions and the following disclaimer in
	* the documentation and/or other materials provided with the
	* distribution.
	* * Neither the name Intel Corporation nor the names of its
	* contributors may be used to endorse or promote products derived
	* from this software without specific prior written permission.
	*
	* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
	* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
	* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
	* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
	* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
	* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
	* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
	* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
	* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
	* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	*
	*****************************************************************************/

	#include <net/mac80211.h>
	#include "fw-api.h"
	#include "mvm.h"

	/* Maps the driver specific channel width definition to the the fw values */
	static inline u8 iwl_mvm_get_channel_width(struct cfg80211_chan_def *chandef)
	{
	switch (chandef->width) {
	case NL80211_CHAN_WIDTH_20_NOHT:
	case NL80211_CHAN_WIDTH_20:
	return PHY_VHT_CHANNEL_MODE20;
	case NL80211_CHAN_WIDTH_40:
	return PHY_VHT_CHANNEL_MODE40;
	case NL80211_CHAN_WIDTH_80:
	return PHY_VHT_CHANNEL_MODE80;
	case NL80211_CHAN_WIDTH_160:
	return PHY_VHT_CHANNEL_MODE160;
	default:
	WARN(1, "Invalid channel width=%u", chandef->width);
	return PHY_VHT_CHANNEL_MODE20;
	}
	}

	/*
	* Maps the driver specific control channel position (relative to the center
	* freq) definitions to the the fw values
	*/
	static inline u8 iwl_mvm_get_ctrl_pos(struct cfg80211_chan_def *chandef)
	{
	switch (chandef->chan->center_freq - chandef->center_freq1) {
	case -70:
	return PHY_VHT_CTRL_POS_4_BELOW;
	case -50:
	return PHY_VHT_CTRL_POS_3_BELOW;
	case -30:
	return PHY_VHT_CTRL_POS_2_BELOW;
	case -10:
	return PHY_VHT_CTRL_POS_1_BELOW;
	case 10:
	return PHY_VHT_CTRL_POS_1_ABOVE;
	case 30:
	return PHY_VHT_CTRL_POS_2_ABOVE;
	case 50:
	return PHY_VHT_CTRL_POS_3_ABOVE;
	case 70:
	return PHY_VHT_CTRL_POS_4_ABOVE;
	default:
	WARN(1, "Invalid channel definition");
	case 0:
	/*
	* The FW is expected to check the control channel position only
	* when in HT/VHT and the channel width is not 20MHz. Return
	* this value as the default one.
	*/
	return PHY_VHT_CTRL_POS_1_BELOW;
	}
	}

	/*
	* Construct the generic fields of the PHY context command
	*/
	static void iwl_mvm_phy_ctxt_cmd_hdr(struct iwl_mvm_phy_ctxt *ctxt,
	struct iwl_phy_context_cmd *cmd,
	u32 action, u32 apply_time)
	{
	memset(cmd, 0, sizeof(struct iwl_phy_context_cmd));

	cmd->id_and_color = cpu_to_le32(FW_CMD_ID_AND_COLOR(ctxt->id,
	ctxt->color));
	cmd->action = cpu_to_le32(action);
	cmd->apply_time = cpu_to_le32(apply_time);
	}

	/*
	* Add the phy configuration to the PHY context command
	*/
	static void iwl_mvm_phy_ctxt_cmd_data(struct iwl_mvm *mvm,
	struct iwl_phy_context_cmd *cmd,
	struct cfg80211_chan_def *chandef,
	u8 chains_static, u8 chains_dynamic)
	{
	u8 valid_rx_chains, active_cnt, idle_cnt;

	/* Set the channel info data */
	cmd->ci.band = (chandef->chan->band == IEEE80211_BAND_2GHZ ?
	PHY_BAND_24 : PHY_BAND_5);

	cmd->ci.channel = chandef->chan->hw_value;
	cmd->ci.width = iwl_mvm_get_channel_width(chandef);
	cmd->ci.ctrl_pos = iwl_mvm_get_ctrl_pos(chandef);

	/* Set rx the chains */

	/* TODO:
	* Need to add on chain noise calibration limitations, and
	* BT coex considerations.
	*/
	valid_rx_chains = mvm->nvm_data->valid_rx_ant;
	idle_cnt = chains_static;
	active_cnt = chains_dynamic;

	cmd->rxchain_info = cpu_to_le32(valid_rx_chains <<
	PHY_RX_CHAIN_VALID_POS);
	cmd->rxchain_info \|= cpu_to_le32(idle_cnt << PHY_RX_CHAIN_CNT_POS);
	cmd->rxchain_info \|= cpu_to_le32(active_cnt <<
	PHY_RX_CHAIN_MIMO_CNT_POS);

	cmd->txchain_info = cpu_to_le32(mvm->nvm_data->valid_tx_ant);
	}

	/*
	* Send a command to apply the current phy configuration. The command is send
	* only if something in the configuration changed: in case that this is the
	* first time that the phy configuration is applied or in case that the phy
	* configuration changed from the previous apply.
	*/
	static int iwl_mvm_phy_ctxt_apply(struct iwl_mvm *mvm,
	struct iwl_mvm_phy_ctxt *ctxt,
	struct cfg80211_chan_def *chandef,
	u8 chains_static, u8 chains_dynamic,
	u32 action, u32 apply_time)
	{
	struct iwl_phy_context_cmd cmd;
	int ret;

	/* Set the command header fields */
	iwl_mvm_phy_ctxt_cmd_hdr(ctxt, &cmd, action, apply_time);

	/* Set the command data */
	iwl_mvm_phy_ctxt_cmd_data(mvm, &cmd, chandef,
	chains_static, chains_dynamic);

	ret = iwl_mvm_send_cmd_pdu(mvm, PHY_CONTEXT_CMD, CMD_SYNC,
	sizeof(struct iwl_phy_context_cmd),
	&cmd);
	if (ret)
	IWL_ERR(mvm, "PHY ctxt cmd error. ret=%d\n", ret);
	return ret;
	}


	struct phy_ctx_used_data {
	unsigned long used[BITS_TO_LONGS(NUM_PHY_CTX)];
	};

	static void iwl_mvm_phy_ctx_used_iter(struct ieee80211_hw *hw,
	struct ieee80211_chanctx_conf *ctx,
	void *_data)
	{
	struct phy_ctx_used_data *data = _data;
	struct iwl_mvm_phy_ctxt phy_ctxt = (void )ctx->drv_priv;

	__set_bit(phy_ctxt->id, data->used);
	}

	/*
	* Send a command to add a PHY context based on the current HW configuration.
	*/
	int iwl_mvm_phy_ctxt_add(struct iwl_mvm mvm, struct iwl_mvm_phy_ctxt ctxt,
	struct cfg80211_chan_def *chandef,
	u8 chains_static, u8 chains_dynamic)
	{
	struct phy_ctx_used_data data = {
	.used = { },
	};

	/*
	* If this is a regular PHY context (not the ROC one)
	* skip the ROC PHY context's ID.
	*/
	if (ctxt != &mvm->phy_ctxt_roc)
	__set_bit(mvm->phy_ctxt_roc.id, data.used);

	lockdep_assert_held(&mvm->mutex);
	ctxt->color++;

	if (!test_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status)) {
	ieee80211_iter_chan_contexts_atomic(
	mvm->hw, iwl_mvm_phy_ctx_used_iter, &data);

	ctxt->id = find_first_zero_bit(data.used, NUM_PHY_CTX);
	if (WARN_ONCE(ctxt->id == NUM_PHY_CTX,
	"Failed to init PHY context - no free ID!\n"))
	return -EIO;
	}

	ctxt->channel = chandef->chan;
	return iwl_mvm_phy_ctxt_apply(mvm, ctxt, chandef,
	chains_static, chains_dynamic,
	FW_CTXT_ACTION_ADD, 0);
	}

	/*
	* Send a command to modify the PHY context based on the current HW
	* configuration. Note that the function does not check that the configuration
	* changed.
	*/
	int iwl_mvm_phy_ctxt_changed(struct iwl_mvm mvm, struct iwl_mvm_phy_ctxt ctxt,
	struct cfg80211_chan_def *chandef,
	u8 chains_static, u8 chains_dynamic)
	{
	lockdep_assert_held(&mvm->mutex);

	ctxt->channel = chandef->chan;
	return iwl_mvm_phy_ctxt_apply(mvm, ctxt, chandef,
	chains_static, chains_dynamic,
	FW_CTXT_ACTION_MODIFY, 0);
	}

	/*
	* Send a command to the FW to remove the given phy context.
	* Once the command is sent, regardless of success or failure, the context is
	* marked as invalid
	*/
	void iwl_mvm_phy_ctxt_remove(struct iwl_mvm mvm, struct iwl_mvm_phy_ctxt ctxt)
	{
	struct iwl_phy_context_cmd cmd;
	int ret;

	lockdep_assert_held(&mvm->mutex);

	iwl_mvm_phy_ctxt_cmd_hdr(ctxt, &cmd, FW_CTXT_ACTION_REMOVE, 0);
	ret = iwl_mvm_send_cmd_pdu(mvm, PHY_CONTEXT_CMD, CMD_SYNC,
	sizeof(struct iwl_phy_context_cmd),
	&cmd);
	if (ret)
	IWL_ERR(mvm, "Failed to send PHY remove: ctxt id=%d\n",
	ctxt->id);
	}