| # SPDX-License-Identifier: GPL-2.0+ |
| # |
| # Kernel configuration file for the UFS host controller drivers. |
| # |
| # Copyright (C) 2011-2013 Samsung India Software Operations |
| # |
| # Authors: |
| # Santosh Yaraganavi <santosh.sy@samsung.com> |
| # Vinayak Holikatti <h.vinayak@samsung.com> |
| |
| config SCSI_UFSHCD_PCI |
| tristate "PCI bus based UFS Controller support" |
| depends on PCI |
| help |
| This selects the PCI UFS Host Controller Interface. Select this if |
| you have UFS Host Controller with PCI Interface. |
| |
| If you have a controller with this interface, say Y or M here. |
| |
| If unsure, say N. |
| |
| config SCSI_UFS_DWC_TC_PCI |
| tristate "DesignWare pci support using a G210 Test Chip" |
| depends on SCSI_UFSHCD_PCI |
| help |
| Synopsys Test Chip is a PHY for prototyping purposes. |
| |
| If unsure, say N. |
| |
| config SCSI_UFSHCD_PLATFORM |
| tristate "Platform bus based UFS Controller support" |
| depends on HAS_IOMEM |
| help |
| This selects the UFS host controller support. Select this if |
| you have an UFS controller on Platform bus. |
| |
| If you have a controller with this interface, say Y or M here. |
| |
| If unsure, say N. |
| |
| config SCSI_UFS_CDNS_PLATFORM |
| tristate "Cadence UFS Controller platform driver" |
| depends on SCSI_UFSHCD_PLATFORM |
| help |
| This selects the Cadence-specific additions to UFSHCD platform driver. |
| |
| If unsure, say N. |
| |
| config SCSI_UFS_DWC_TC_PLATFORM |
| tristate "DesignWare platform support using a G210 Test Chip" |
| depends on SCSI_UFSHCD_PLATFORM |
| help |
| Synopsys Test Chip is a PHY for prototyping purposes. |
| |
| If unsure, say N. |
| |
| config SCSI_UFS_QCOM |
| tristate "QCOM specific hooks to UFS controller platform driver" |
| depends on SCSI_UFSHCD_PLATFORM && ARCH_QCOM |
| depends on GENERIC_MSI_IRQ |
| depends on RESET_CONTROLLER |
| select QCOM_SCM if SCSI_UFS_CRYPTO |
| help |
| This selects the QCOM specific additions to UFSHCD platform driver. |
| UFS host on QCOM needs some vendor specific configuration before |
| accessing the hardware which includes PHY configuration and vendor |
| specific registers. |
| |
| Select this if you have UFS controller on QCOM chipset. |
| If unsure, say N. |
| |
| config SCSI_UFS_MEDIATEK |
| tristate "Mediatek specific hooks to UFS controller platform driver" |
| depends on SCSI_UFSHCD_PLATFORM && ARCH_MEDIATEK |
| select PHY_MTK_UFS |
| select RESET_TI_SYSCON |
| help |
| This selects the Mediatek specific additions to UFSHCD platform driver. |
| UFS host on Mediatek needs some vendor specific configuration before |
| accessing the hardware which includes PHY configuration and vendor |
| specific registers. |
| |
| Select this if you have UFS controller on Mediatek chipset. |
| |
| If unsure, say N. |
| |
| config SCSI_UFS_HISI |
| tristate "Hisilicon specific hooks to UFS controller platform driver" |
| depends on (ARCH_HISI || COMPILE_TEST) && SCSI_UFSHCD_PLATFORM |
| help |
| This selects the Hisilicon specific additions to UFSHCD platform driver. |
| |
| Select this if you have UFS controller on Hisilicon chipset. |
| If unsure, say N. |
| |
| config SCSI_UFS_RENESAS |
| tristate "Renesas specific hooks to UFS controller platform driver" |
| depends on (ARCH_RENESAS || COMPILE_TEST) && SCSI_UFSHCD_PLATFORM |
| help |
| This selects the Renesas specific additions to UFSHCD platform driver. |
| UFS host on Renesas needs some vendor specific configuration before |
| accessing the hardware. |
| |
| Select this if you have UFS controller on Renesas chipset. |
| |
| If unsure, say N. |
| |
| config SCSI_UFS_TI_J721E |
| tristate "TI glue layer for Cadence UFS Controller" |
| depends on OF && HAS_IOMEM && (ARCH_K3 || COMPILE_TEST) |
| help |
| This selects driver for TI glue layer for Cadence UFS Host |
| Controller IP. |
| |
| Selects this if you have TI platform with UFS controller. |
| If unsure, say N. |
| |
| config SCSI_UFS_EXYNOS |
| tristate "Exynos specific hooks to UFS controller platform driver" |
| depends on SCSI_UFSHCD_PLATFORM && (ARCH_EXYNOS || COMPILE_TEST) |
| help |
| This selects the Samsung Exynos SoC specific additions to UFSHCD |
| platform driver. UFS host on Samsung Exynos SoC includes HCI and |
| UNIPRO layer, and associates with UFS-PHY driver. |
| |
| Select this if you have UFS host controller on Samsung Exynos SoC. |
| If unsure, say N. |
| |
| config SCSI_UFS_VARIABLE_SG_ENTRY_SIZE |
| bool |
| default y if SCSI_UFS_EXYNOS && SCSI_UFS_CRYPTO |
| |
| config SCSI_UFS_SPRD |
| tristate "Unisoc specific hooks to UFS controller platform driver" |
| depends on SCSI_UFSHCD_PLATFORM && (ARCH_SPRD || COMPILE_TEST) |
| help |
| This selects the Unisoc specific additions to UFSHCD platform driver. |
| UFS host on Unisoc needs some vendor specific configuration before |
| accessing the hardware which includes PHY configuration and vendor |
| specific registers. |
| |
| Select this if you have UFS controller on Unisoc chipset. |
| If unsure, say N. |
